HNC-100P - LEM Components - searchdatasheet.com

Electrical data

Primary nominal Primary current Type

DC current measuring range

IPN (A) IP (A)

50 0 .. ± 75 HNC - 050P

100 0 .. ± 140 HNC - 100P

HNC - 050P HNC - 100P

RMMeasuing resistance 60 .. 90 60 .. 80 Ω

ISN Second nominal current 50 50 mA

KNTurns ratio 1 : 1000 1 : 2000

VCSupply voltage (± 5 %) ± 15 V

ICCurrent consumpution 15 + ISN mA

VdR.m.s. voltage for AC isolation test, 50/60Hz, 1 min 2.5 kV

Accuracy-Dynamic performance data

XAccuracy @ TA = 25°C ± 1 % of IPN

εεLLinearity (0 .. ± IPN)< ± 0.5 %

IOElectrical offset current @IP = 0, @TA = 25°C ± 0.2 mA

IHC Hysteresis offset current @ IP = 0,

after an excursion of IPN ± 0.15 mA

IOT Thermal drift of IO 0°C .. +70°C ± 0.005 ms/°C

t rResponse time @ 90% of IP <1 µs

TCεεGThermal drift of the gain (% of reading) < ± 0.004 %/°C

General data

TAAmbient operating temperature - 10 .. + 80 °C

TSAmbient storage temperature - 15 .. + 85 °C

HNC - 200P HNC - 300P

RSSecondary coil Resistance

@TA = 25°C 75 95 Ω

mMass 30 g

Current Transducer HNC- 050 .. 100P

For the electronic measurement of currents: DC, AC, pulsed, mixed,

with a galvanic isolation between the primary circuit (high power) and

the secondary circuit (electronic circuit).

IPN = 50 .. 100 A

Features

• Hall effect measuring principle

• Galvanic isolation between primary

and secondary circuit

• Isolation voltage 2500 V

• Low power consumption

Advantages

• Easy mounting

• Small size and space saving

• Only one design for wide current

ratings range

• High immunity to external interference

Applications

• DC motor drives

• Switched Mode Power Supplies

(SMPS)

• AC variable speed drives

• Uninterruptible Power Supplies

(UPS)

• Battery supplied applications

• Inverters

www.nanalem.co.jp

010301/1