May 2015
DocID15688 Rev 6
1/31
This is information on a product in full production.
www.st.com
TSV63x, TSV63xA
Dual and quad, rail-to-rail input/output, 60 µA, 880 kHz
operational amplifiers
Datasheet - production data
Features
Rail-to-rail input and output
Low power consumption: 60 µA typ at 5 V
Low supply voltage: 1.5 V - 5.5 V
Gain bandwidth product: 880 kHz typ
Unity gain stable on 100 pF capacitor
Low power shutdown mode: 5 nA typ
Low offset voltage: 800 µV max (A version)
Low input bias current: 1 pA typ
EMI hardened op amps
Automotive qualification
Related products
See the TSV52x series for higher merit
factor (1.15 MHz for 45 µA)
See the TSV61x (120 kHz for 9 µA) or
TSV62x (420 kHz for 29 µA) for more power
savings
Applications
Battery-powered applications
Portable devices
Signal conditioning
Active filtering
Medical instrumentation
Description
The TSV63x and TSV63xA series of dual and
quad operational amplifiers offers low voltage
operation and rail-to-rail input and output.
This family features an excellent speed/power
consumption ratio, offering an 880 kHz gain-
bandwidth product while consuming only 60 µA at
5 V supply voltage. The devices also feature an
ultralow input bias current and TSV633 and
TSV635 have a shutdown mode.
These features make the TSV63x and TSV63xA
family ideal for sensor interfaces, battery-
supplied and portable applications, and active
filtering.
Table 1: Device summary
Reference
Quad version
Without
standby
With
standby
Without
standby
With
standby
TSV63x
TSV632
TSV633
TSV634
TSV635
TSV63xA
TSV632A
TSV633A
TSV634A
TSV635A
Contents
TSV632, TSV632A, TSV633, TSV633A, TSV634,
TSV634A, TSV635, TSV635A
2/31
DocID15688 Rev 6
Contents
1 Package pin connections ................................................................ 3
2 Absolute maximum ratings and operating conditions ................. 4
3 Electrical characteristics ................................................................ 6
4 Application information ................................................................ 14
4.1 Operating voltages .......................................................................... 14
4.2 Rail-to-rail input ............................................................................... 14
4.3 Rail-to-rail output ............................................................................. 14
4.4 Shutdown function (TSV633, TSV635) ........................................... 15
4.5 Optimization of DC and AC parameters .......................................... 16
4.6 Driving resistive and capacitive loads ............................................. 16
4.7 PCB layouts .................................................................................... 16
4.8 Macromodel .................................................................................... 17
5 Package information ..................................................................... 18
5.1 DFN8 2 x 2 (NB) package information ............................................ 19
5.2 SOT23-8 package information ........................................................ 21
5.3 MiniSO8 package information ......................................................... 22
5.4 MiniSO10 package information ....................................................... 23
5.5 SO8 package information ................................................................ 24
5.6 QFN16 3x3 package information ..................................................... 25
5.7 TSSOP14 package information ....................................................... 27
5.8 TSSOP16 package information ....................................................... 28
6 Ordering information ..................................................................... 29
7 Revision history ............................................................................ 30
TSV632, TSV632A, TSV633, TSV633A, TSV634,
TSV634A, TSV635, TSV635A
Package pin connections
DocID15688 Rev 6
3/31
1 Package pin connections
Figure 1: Pin connections for each package (top view)
1. The exposed pads of the DFN8 2x2 and the QFN16 3x3 can be connected to VCC- or left floating.
Absolute maximum ratings and operating
conditions
TSV632, TSV632A, TSV633, TSV633A, TSV634,
TSV634A, TSV635, TSV635A
4/31
DocID15688 Rev 6
2 Absolute maximum ratings and operating conditions
Table 2: Absolute maximum ratings (AMR)
Symbol
Parameter
Value
Unit
VCC
Supply voltage (1)
6
V
Vid
Differential input voltage (2)
±VCC
Vin
Input voltage (3)
(VCC-) - 0.2 to (VCC+) + 0.2
Iin
Input current (4)
10
mA
SHDN
SHDN
Shutdown voltage (3)
(VCC-) - 0.2 to (VCC+) + 0.2
V
Tstg
Storage temperature
-65 to 150
°C
Rthja
Thermal resistance junction to
ambient (5)(6)
DFN8 2x2
57
°C/W
SOT23-8
105
MiniSO8
190
MiniSO10
113
SO8
125
QFN16 3x3
39
TSSOP14
100
TSSOP16
95
Tj
Maximum junction temperature
150
°C
ESD
HBM: human body model (7)
4000
V
MM: machine model (8)
300
CDM: charged device model (9)
1500
Latch-up immunity
200
mA
Notes:
(1)All voltage values, except the differential voltage are with respect to the network ground terminal.
(2)Differential voltages are the non-inverting input terminal with respect to the inverting input terminal.
(3)VCC - VIN must not exceed 6 V, VIN must not exceed 6 V.
(4)Input current must be limited by a resistor in series with the inputs
(5)Rth are typical values
(6)Short-circuits can cause excessive heating and destructive dissipation
(7)Human body model: 100 pF discharged through a 1.5 kΩ resistor between two pins of the device, done for all
couples of pin combinations with other pins floating.
(8)Machine model: a 200 pF cap is charged to the specified voltage, then discharged directly between two pins of
the device with no external series resistor (internal resistor < 5 Ω), done for all couples of pin combinations with
other pins floating
(9)Charged device model: all pins plus package are charged together to the specified voltage and then discharged
directly to the ground.
TSV632, TSV632A, TSV633, TSV633A, TSV634,
TSV634A, TSV635, TSV635A
Absolute maximum ratings and operating
conditions
DocID15688 Rev 6
5/31
Table 3: Operating conditions
Symbol
Parameter
Value
Unit
VCC
Supply voltage
1.5 to 5.5
V
VICM
Common-mode input voltage range
(VCC-) - 0.1 to (VCC+) + 0.1
Toper
Operating free-air temperature range
-40 to 125
°C
Electrical characteristics
TSV632, TSV632A, TSV633, TSV633A, TSV634,
TSV634A, TSV635, TSV635A
6/31
DocID15688 Rev 6
3 Electrical characteristics
Table 4: Electrical characteristics at VCC+ = 1.8 V with VCC- = 0 V, Vicm = VCC/2,
Tamb = 25° C, and RL connected to VCC/2 (unless otherwise specified)
Symbol
Parameter
Conditions
Min.
Typ.
Max.
Unit
DC performance
Vio
Offset voltage
TSV63x
3
mV
TSV63xA
0.8
TSV633AIST (MiniSO10)
1
Tmin < Top < Tmax - TSV63x
4.5
Tmin < Top < Tmax - TSV63xA
2
Tmin < Top < Tmax - TSV633AIST
2.2
∆Vio/∆T
Input offset voltage drift
2
μV/°C
Iio
Input offset current
(Vout = VCC/2)
1
10 (1)
pA
Tmin < Top < Tmax
1
100
Iib
Input bias current
(Vout = VCC/2)
1
10 (1)
Tmin < Top < Tmax
1
100
CMR
Common mode rejection
ratio 20 log (ΔVic/ΔVio)
0 V to 1.8 V, Vout = 0.9 V
53
74
dB
Tmin < Top < Tmax
51
Avd
Large signal voltage gain
RL= 10 kΩ, Vout = 0.5 V to 1.3 V
85
95
Tmin < Top < Tmax
80
VOH
High level output voltage,
(VOH = VCC - Vout)
RL = 10 kΩ
5
35
mV
Tmin < Top < Tmax
50
VOL
Low level output voltage
RL = 10 kΩ
4
35
Tmin < Top < Tmax
50
Iout
Isink
Vo = 1.8 V
6
12
mA
Tmin < Top < Tmax
4
Isource
Vo = 0 V
6
10
Tmin < Top < Tmax
4
ICC
Supply current
(per channel)
No load, Vout = VCC/2
40
50
60
µA
Tmin < Top < Tmax
62
AC performance
GBP
Gain bandwidth product
RL = 2 kΩ, CL = 100 pF, f = 100 kHz
700
790
kHz
ɸm
Phase margin
RL = 2 kΩ, CL = 100 pF
45
Degrees
Gm
Gain margin
RL = 2 kΩ, CL = 100 pF
13
dB
SR
Slew rate
RL = 2 kΩ, CL = 100 pF, Av = 1
0.2
0.27
V/μs
en
Equivalent input noise
voltage
f = 1 kHz
60
nV/√Hz
f = 10 kHz
33
Notes:
(1)Guaranteed by design
TSV632, TSV632A, TSV633, TSV633A, TSV634,
TSV634A, TSV635, TSV635A
Electrical characteristics
DocID15688 Rev 6
7/31
Table 5: Shutdown characteristics VCC = 1.8 V
Symbol
Parameter
Conditions
Min.
Typ.
Max.
Unit
DC performance
ICC
Supply current in shutdown
mode (all channels)
SHDN = VCC-
2.5
50
nA
Tmin < Top < 85° C
200
Tmin < Top < 125° C
1.5
µA
ton
Amplifier turn-on time
RL = 2 kΩ, Vout = (VCC-) to
(VCC-) + 0.2 V
200
ns
toff
Amplifier turn-off time
RL = 2 kΩ, Vout = (VCC+) - 0.5 V to
(VCC+) - 0.7 V
20
VIH
SHDN logic high
1.35
V
VIL
SHDN logic low
0.6
IIH
SHDN current high
SHDN = VCC+
10
pA
IIL
SHDN current low
SHDN = VCC-
10
IOLeak
Output leakage in shutdown
mode
SHDN = VCC-
50
Tmin < Top < 125° C
1
nA
Electrical characteristics
TSV632, TSV632A, TSV633, TSV633A, TSV634,
TSV634A, TSV635, TSV635A
8/31
DocID15688 Rev 6
Table 6: VCC+ = 3.3 V, VCC- = 0 V, Vicm = VCC/2, Tamb = 25° C, RL connected to VCC/2
(unless otherwise specified)
Symbol
Parameter
Conditions
Min.
Typ.
Max.
Unit
DC performance
Vio
Offset voltage
TSV63x
3
mV
TSV63xA
0.8
TSV633AIST (MiniSO10)
1
Tmin < Top < Tmax - TSV63x
4.5
Tmin < Top < Tmax - TSV63xA
2
Tmin < Top < Tmax - TSV633AIST
2.2
∆Vio/∆T
Input offset voltage drift
2
μV/°C
Iio
Input offset current
Vout = VCC/2
1
10 (1)
pA
Tmin < Top < Tmax
1
100
Iib
Input bias current
Vout = VCC/2
1
10 (1)
Tmin < Top < Tmax
1
100
CMR
Common mode rejection
ratio 20 log (ΔVic/ΔVio)
0 V to 3.3 V, Vout = 1.65 V
57
79
dB
Tmin < Top < Tmax
53
Avd
Large signal voltage gain
RL = 10 kΩ, Vout = 0.5 V to 2.8 V
88
98
Tmin < Top < Tmax
83
VOH
High level output voltage,
(VOH = VCC - Vout)
RL = 10 kΩ
5
35
mV
Tmin < Top < Tmax
50
VOL
Low level output voltage
RL = 10 kΩ
4
35
Tmin < Top < Tmax
50
Iout
Isink
Vo = 3.3 V
23
45
mA
Tmin < Top < Tmax
20
Isource
Vo = 0 V
23
38
Tmin < Top < Tmax
20
ICC
Supply current,
(per channel)
No load, Vout = 1.75 V
43
55
64
µA
Tmin < Top < Tmax
66
AC performance
GBP
Gain bandwidth product
RL = 2 kΩ, CL = 100 pF,
f = 100 kHz
710
860
kHz
ɸm
Phase margin
RL = 2 kΩ, CL = 100 pF
46
Degrees
Gm
Gain margin
RL = 2 kΩ, CL = 100 pF
13
dB
SR
Slew rate
RL = 2 kΩ, CL = 100 pF, AV = 1
0.22
0.29
V/μs
Notes:
(1)Guaranteed by design
TSV632, TSV632A, TSV633, TSV633A, TSV634,
TSV634A, TSV635, TSV635A
Electrical characteristics
DocID15688 Rev 6
9/31
Table 7: Electrical characteristics at VCC+ = 5 V with VCC- = 0 V, Vicm = VCC/2, Tamb = 25° C,
and RL connected to VCC/2 (unless otherwise specified)
Symbol
Parameter
Conditions
Min.
Typ.
Max.
Unit
DC performance
Vio
Offset voltages
TSV63x
3
mV
TSV63xA
0.8
TSV633AIST ( MiniSO10)
1
Tmin < Top < Tmax - TSV63x
4.5
Tmin < Top < Tmax - TSV63xA
2
Tmin < Top < Tmax - TSV633AIST
2.2
∆Vio/∆T
Input offset voltage drift
2
μV/°C
Iio
Input offset current
(Vout = VCC/2)
1
10 (1)
pA
Tmin < Top < Tmax
1
100
Iib
Input bias current
(Vout = VCC/2)
1
10 (1)
Tmin < Top < Tmax
1
100
CMR
Common mode rejection
ratio 20 log (ΔVic/ΔVio)
0 V to 5 V, Vout = 2.5 V
60
80
dB
Tmin < Top < Tmax
55
SVR
Supply voltage rejection
ratio 20 log (ΔVCC/ΔVio)
VCC = 1.8 to 5 V
75
102
Tmin < Top < Tmax
73
Avd
Large signal voltage gain
RL = 10 kΩ, Vout = 0.5 V to 4.5 V
89
98
Tmin < Top < Tmax
84
EMIRR
EMI rejection ratio, EMIRR
= -20 log (VRFpeak/ΔVio)
VRF = 100 mVrms, f = 400 MHz
61
VRF = 100 mVrms, f = 900 MHz
85
VRF = 100 mVrms, f = 1800 MHz
92
VRF = 100 mVrms, f = 2400 MHz
83
VOH
High level output voltage,
(VOH = VCC - Vout)
RL = 10 kΩ
7
35
mV
Tmin < Top < Tmax
50
VOL
Low level output voltage
RL = 10 kΩ
6
35
Tmin < Top < Tmax
50
Iout
Isink
Vo = 5 V
40
69
mA
Tmin < Top < Tmax
35
Isource
Vo = 0 V
40
74
Tmin < Top < Tmax
35
ICC
Supply current,
(per channel)
No load, Vout = VCC/2
50
60
69
µA
Tmin < Top < Tmax
72
AC performance
GBP
Gain bandwidth product
RL = 2 kΩ, CL = 100 pF,
f = 100 kHz
730
880
kHz
Fu
Unity gain frequency
RL = 2 kΩ, CL = 100 pF
830
ɸm
Phase margin
RL = 2 kΩ, CL = 100 pF
48
Degrees
Electrical characteristics
TSV632, TSV632A, TSV633, TSV633A, TSV634,
TSV634A, TSV635, TSV635A
10/31
DocID15688 Rev 6
Symbol
Parameter
Conditions
Min.
Typ.
Max.
Unit
Gm
Gain margin
RL = 2 kΩ, CL = 100 pF
13
dB
SR
Slew rate
RL = 2 kΩ, CL = 100 pF, Av =1
0.25
0.34
V/μs
en
Equivalent input noise
voltage
f = 1 kHz
60
nV/√Hz
f = 10 kHz
33
THD+en
Total harmonic distortion +
noise
VCC = 5V, f = 1 kHz, Av = 1, RL =
100 kΩ, Vicm = VCC/2, Vout = 2Vpp
0.002
%
Notes:
(1)Guaranteed by design
Table 8: Shutdown characteristics at VCC = 5 V
Symbol
Parameter
Conditions
Min.
Typ.
Max.
Unit
DC performance
ICC
Supply current in shutdown
mode (all channels)
SHDN = VCC-
5
50
nA
Tmin < Top < 85° C
200
Tmin < Top < 125° C
1.5
µA
ton
Amplifier turn-on time
RL = 2 kΩ, Vout = (VCC-) to
(VCC-) + 0.2 V
200
ns
toff
Amplifier turn-off time
RL = 2 kΩ, Vout = (VCC+) - 0.5 V to
(VCC+) - 0.7 V
20
VIH
SHDN logic high
2
V
VIL
SHDN logic low
0.8
IIH
SHDN current high
SHDN = VCC+
10
pA
IIL
SHDN current low
SHDN = VCC-
10
IOLeak
Output leakage in shutdown
mode
SHDN = VCC-
50
Tmin < Top < 125 °C
1
nA
TSV632, TSV632A, TSV633, TSV633A, TSV634,
TSV634A, TSV635, TSV635A
Electrical characteristics
DocID15688 Rev 6
11/31
Figure 2: Supply current vs. supply voltage
at Vicm = VCC/2
Figure 3: Output current vs. output voltage
at VCC = 1.5 V
Figure 4: Output current vs. output voltage
at VCC = 5 V
Figure 5: Voltage gain and phase vs. frequency
at VCC = 1.5 V
Figure 6: Voltage gain and phase vs. frequency
at VCC = 5 V
Figure 7: Phase margin vs. output current
at VCC = 5 V
Ω
Electrical characteristics
TSV632, TSV632A, TSV633, TSV633A, TSV634,
TSV634A, TSV635, TSV635A
12/31
DocID15688 Rev 6
Figure 8: Positive slew rate vs. time
Figure 9: Negative slew rate vs. time
Figure 10: Positive slew rate vs. supply voltage
Figure 11: Negative slew rate vs. supply voltage
Figure 12: Distortion + noise vs. output voltage
Figure 13: Distortion + noise vs. frequency
THD + N (%)
Output Voltage(Vpp)
Rl = 100 kΩ
Vcc = 5.5 V
Vcc = 5.5 V
Rl = 2 kΩ
f = 1 kHz
Gain = 1
BW = 22 kHz
Vicm = Vcc/2
Vcc = 1.5 V
Rl = 2 kΩ
Vcc = 1.5 V
Rl = 100 kΩ
10 100 1000 10000 100000
1E-3
0.01
0.1
1
THD + N (%)
Av = 1
Vin = 1 Vpp
BW = 80 kHz
Vicm = Vcc/2
Vcc = 1.5 V
Rl = 2 kΩ
Vcc = 1.5 V
Rl = 100 kΩ
Vcc = 5.5 V
Rl = 2 kΩ
Vcc = 5.5 V
Rl = 100 kΩ
TSV632, TSV632A, TSV633, TSV633A, TSV634,
TSV634A, TSV635, TSV635A
Electrical characteristics
DocID15688 Rev 6
13/31
Figure 14: Noise vs. frequency
Figure 15: EMIRR vs. frequency at VCC = 5 V,
T = 25 °C
100 1000 10000
0
50
100
150
200
250
300
Equivalent Input VoltageNoise(nV/VHz)
Vcc=5V
Vicm=4.5V
Vicm=2.5V
Tamb=25°C
101102103
00
2020
4040
6060
8080
100100
120120
EMIRRVpeak (dB)
Application information
TSV632, TSV632A, TSV633, TSV633A, TSV634,
TSV634A, TSV635, TSV635A
14/31
DocID15688 Rev 6
4 Application information
4.1 Operating voltages
The TSV63x and TSV63xA can operate from 1.5 to 5.5 V. Their parameters are fully
specified for 1.8 V, 3.3 V, and 5 V power supplies. However, the parameters are very
stable in the full VCC range and several characterization curves show the TSV63x and
TSV63xA characteristics at 1.5 V. Additionally, the main specifications are guaranteed in
extended temperature ranges from -40 °C to 125 °C.
4.2 Rail-to-rail input
The TSV63x and TSV63xA are built with two complementary PMOS and NMOS input
differential pairs. The devices have a rail-to-rail input and the input common mode range is
extended from (VCC-) - 0.1 V to (VCC+) + 0.1 V. The transition between the two pairs appears
at (VCC+) - 0.7 V. In the transition region, the performance of CMRR, PSRR, Vio
(Figure 16 and Figure 17), and THD is slightly degraded.
Figure 16: Input offset voltage vs input common mode
voltage at VCC = 1.5 V
Figure 17: Input offset voltage vs input common mode
voltage at VCC = 5 V
The devices are guaranteed without phase reversal.
4.3 Rail-to-rail output
The operational amplifiers’ output levels can go close to the rails: 35 mV maximum above
and below the rail when connected to a 10 kΩ resistive load to VCC/2.
TSV632, TSV632A, TSV633, TSV633A, TSV634,
TSV634A, TSV635, TSV635A
Application information
DocID15688 Rev 6
15/31
4.4 Shutdown function (TSV633, TSV635)
The operational amplifiers are enabled when the SHDN pin is pulled high. To disable the
amplifiers, the SHDN must be pulled down to VCC-. When in shutdown mode, the
amplifiers’ output is in a high impedance state. The SHDN pin must never be left floating,
but tied to VCC+ or VCC-.
The turn-on and turn-off times are calculated for an output variation of ±200 mV. Figure 18
and Figure 19 show the test configurations. Figure 20 shows the time it takes the product to
come out of shutdown mode and Figure 21 shows the time it takes the product to enter
shutdown mode.
Figure 18: Test configuration for turn-on time (Vout
pulled down)
Figure 19: Test configuration for turn-off time (Vout
pulled down)
Figure 20: Turn-on time, VCC = 5 V, Vout pulled down,
T = 25° C
Figure 21: Turn-off time, VCC = 5 V, Vout pulled down,
T = 25° C
Vcc-0.5V +
-
+Vcc
DUT
GND
GND
2 kΩ
Vcc-0.5V +
-
+Vcc
DUT
GND
GND
2 kΩ
µ
°C
25°
µ
Application information
TSV632, TSV632A, TSV633, TSV633A, TSV634,
TSV634A, TSV635, TSV635A
16/31
DocID15688 Rev 6
4.5 Optimization of DC and AC parameters
These devices use an innovative approach to reduce the spread of the main DC and AC
parameters. An internal adjustment achieves a very narrow spread of the current
consumption (60 µA typical, min/max at ±17 %). Parameters linked to the current
consumption value, such as GBP, SR, and Avd, benefit from this narrow dispersion. All
parts present a similar speed and the same behavior in terms of stability. In addition, the
minimum values of GBP and SR are guaranteed (GBP = 730 kHz minimum and
SR = 0.25 V/µs minimum).
4.6 Driving resistive and capacitive loads
These products are micropower, low-voltage, operational amplifiers optimized to drive
rather large resistive loads, above 2 kΩ. For lower resistive loads, the THD level may
significantly increase.
In a follower configuration, these operational amplifiers can drive capacitive loads up to
100 pF with no oscillations. When driving larger capacitive loads, adding an in-series
resistor at the output can improve the stability of the devices (see Figure 22 for
recommended in-series resistor values). Once the in-series resistor value has been
selected, the stability of the circuit should be tested on the bench and simulated with the
simulation model.
Figure 22: In-series resistor vs. capacitive load
4.7 PCB layouts
For correct operation, it is advised to add 10 nF decoupling capacitors as close as possible
to the power supply pins.
TSV632, TSV632A, TSV633, TSV633A, TSV634,
TSV634A, TSV635, TSV635A
Application information
DocID15688 Rev 6
17/31
4.8 Macromodel
Two accurate macromodels (with or without the shutdown feature) of the TSV63x and
TSV63xA are available on STMicroelectronics’ web site at www.st.com. These models are
a trade-off between accuracy and complexity (that is, time simulation) of the TSV63x and
TSV63xA operational amplifiers. They emulate the nominal performances of a typical
device within the specified operating conditions mentioned in the datasheet. They also help
to validate a design approach and to select the right operational amplifier, but they do not
replace on-board measurements.
Package information
TSV632, TSV632A, TSV633, TSV633A, TSV634,
TSV634A, TSV635, TSV635A
18/31
DocID15688 Rev 6
5 Package information
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK® packages, depending on their level of environmental compliance. ECOPACK®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK® is an ST trademark.
TSV632, TSV632A, TSV633, TSV633A, TSV634,
TSV634A, TSV635, TSV635A
Package information
DocID15688 Rev 6
19/31
5.1 DFN8 2 x 2 (NB) package information
Figure 23: DFN8 2 x 2 mm (NB) package outline
Table 9: DFN8 2 x 2 x 0.6 mm (NB) package mechanical data (pitch 0.5 mm)
Ref.
Dimensions
Millimeters
Inches
Min.
Typ.
Max.
Min.
Typ.
Max.
A
0.51
0.55
0.60
0.020
0.022
0.024
A1
0.05
0.002
A3
0.15
0.006
b
0.18
0.25
0.30
0.007
0.010
0.012
D
1.85
2.00
2.15
0.073
0.079
0.085
D2
1.45
1.60
1.70
0.057
0.063
0.067
E
1.85
2.00
2.15
0.073
0.079
0.085
E2
0.75
0.90
1.00
0.030
0.035
0.039
e
0.50
0.020
L
0.425
0.017
ddd
0.08
0.003
Package information
TSV632, TSV632A, TSV633, TSV633A, TSV634,
TSV634A, TSV635, TSV635A
20/31
DocID15688 Rev 6
Figure 24: DFN8 2 x 2 mm (NB) recommended footprint
TSV632, TSV632A, TSV633, TSV633A, TSV634,
TSV634A, TSV635, TSV635A
Package information
DocID15688 Rev 6
21/31
5.2 SOT23-8 package information
Figure 25: SOT23-8 package outline
Table 10: SOT23-8 package mechanical data
Ref.
Dimensions
Millimeters
Inches
Min.
Typ.
Max.
Min.
Typ.
Max.
A
1.45
0.057
A1
0.15
0.006
A2
0.90
1.30
0.035
0.051
b
0.22
0.38
0.009
0.015
c
0.08
0.22
0.003
0.009
D
2.80
3.00
0.110
0.118
E
2.60
3.00
0.102
0.118
E1
1.50
1.75
0.059
0.069
e
0.65
0.026
e1
1.95
0.077
L
0.30
0.60
0.012
0.024
<
0°
8°
0°
8°
Dimensions in mm SIDE VIEW
A2A
A1
coplanar leads
0.1 C
D
e1
e
e/2
E1/2
E1
Gauge plane
L
Seating plane
0.25
C
E/2
E
TOP VIEW
b (8x leads)
c
projection
Package information
TSV632, TSV632A, TSV633, TSV633A, TSV634,
TSV634A, TSV635, TSV635A
22/31
DocID15688 Rev 6
5.3 MiniSO8 package information
Figure 26: MiniSO8 package outline
Table 11: MiniSO8 package mechanical data
Ref.
Dimensions
Millimeters
Inches
Min.
Typ.
Max.
Min.
Typ.
Max.
A
1.1
0.043
A1
0
0.15
0
0.006
A2
0.75
0.85
0.95
0.030
0.033
0.037
b
0.22
0.40
0.009
0.016
c
0.08
0.23
0.003
0.009
D
2.80
3.00
3.20
0.11
0.118
0.126
E
4.65
4.90
5.15
0.183
0.193
0.203
E1
2.80
3.00
3.10
0.11
0.118
0.122
e
0.65
0.026
L
0.40
0.60
0.80
0.016
0.024
0.031
L1
0.95
0.037
L2
0.25
0.010
k
0°
8°
0°
8°
ccc
0.10
0.004
TSV632, TSV632A, TSV633, TSV633A, TSV634,
TSV634A, TSV635, TSV635A
Package information
DocID15688 Rev 6
23/31
5.4 MiniSO10 package information
Figure 27: MiniSO10 package outline
Table 12: MiniSO-10 package mechanical data
Ref.
Dimensions
Millimeters
Inches
Min.
Typ.
Max.
Min.
Typ.
Max.
A
1.10
0.043
A1
0.05
0.10
0.15
0.002
0.004
0.006
A2
0.78
0.86
0.94
0.031
0.034
0.037
b
0.25
0.33
0.40
0.010
0.013
0.016
c
0.15
0.23
0.30
0.006
0.009
0.012
D
2.90
3.00
3.10
0.114
0.118
0.122
E
4.75
4.90
5.05
0.187
0.193
0.199
E1
2.90
3.00
3.10
0.114
0.118
0.122
e
0.50
0.020
L
0.40
0.55
0.70
0.016
0.022
0.028
L1
0.95
0.037
k
0°
3°
6°
0°
3°
6°
aaa
0.10
0.004
Package information
TSV632, TSV632A, TSV633, TSV633A, TSV634,
TSV634A, TSV635, TSV635A
24/31
DocID15688 Rev 6
5.5 SO8 package information
Figure 28: SO8 package outline
Table 13: SO8 package mechanical data
Ref.
Dimensions
Millimeters
Inches
Min.
Typ.
Max.
Min.
Typ.
Max.
A
1.75
0.069
A1
0.10
0.25
0.004
0.010
A2
1.25
0.049
b
0.28
0.48
0.011
0.019
c
0.17
0.23
0.007
0.010
D
4.80
4.90
5.00
0.189
0.193
0.197
E
5.80
6.00
6.20
0.228
0.236
0.244
E1
3.80
3.90
4.00
0.150
0.154
0.157
e
1.27
0.050
h
0.25
0.50
0.010
0.020
L
0.40
1.27
0.016
0.050
L1
1.04
0.040
k
1°
8°
1°
8°
ccc
0.10
0.004
TSV632, TSV632A, TSV633, TSV633A, TSV634,
TSV634A, TSV635, TSV635A
Package information
DocID15688 Rev 6
25/31
5.6 QFN16 3x3 package information
Figure 29: QFN16 3x3 mm package outline
Package information
TSV632, TSV632A, TSV633, TSV633A, TSV634,
TSV634A, TSV635, TSV635A
26/31
DocID15688 Rev 6
Table 14: QFN16 3x3 mm package mechanical data
Ref.
Dimensions
Millimeters
Inches
Min.
Typ.
Max.
Min.
Typ.
Max.
A
0.80
0.90
1.00
0.031
0.035
0.039
A1
0
0.05
0
0.002
A3
0.20
0.008
b
0.18
0.30
0.007
0.012
D
2.90
3.00
3.10
0.114
0.118
0.122
D2
1.50
1.80
0.059
0.071
E
2.90
3.00
3.10
0.114
0.118
0.122
E2
1.50
1.80
0.059
0.071
e
0.50
0.020
L
0.30
0.50
0.012
0.020
Figure 30: QFN16 3x3 mm recommended footprint
TSV632, TSV632A, TSV633, TSV633A, TSV634,
TSV634A, TSV635, TSV635A
Package information
DocID15688 Rev 6
27/31
5.7 TSSOP14 package information
Figure 31: TSSOP14 package outline
Table 15: TSSOP14 package mechanical data
Ref.
Dimensions
Millimeters
Inches
Min.
Typ.
Max.
Min.
Typ.
Max.
A
1.20
0.047
A1
0.05
0.15
0.002
0.004
0.006
A2
0.80
1.00
1.05
0.031
0.039
0.041
b
0.19
0.30
0.007
0.012
c
0.09
0.20
0.004
0.0089
D
4.90
5.00
5.10
0.193
0.197
0.201
E
6.20
6.40
6.60
0.244
0.252
0.260
E1
4.30
4.40
4.50
0.169
0.173
0.176
e
0.65
0.0256
L
0.45
0.60
0.75
0.018
0.024
0.030
L1
1.00
0.039
k
0°
8°
0°
8°
aaa
0.10
0.004
Package information
TSV632, TSV632A, TSV633, TSV633A, TSV634,
TSV634A, TSV635, TSV635A
28/31
DocID15688 Rev 6
5.8 TSSOP16 package information
Figure 32: TSSOP16 package outline
Table 16: TSSOP16 package mechanical data
Ref.
Dimensions
Millimeters
Inches
Min.
Typ.
Max.
Min.
Typ.
Max.
A
1.20
0.047
A1
0.05
0.15
0.002
0.006
A2
0.80
1.00
1.05
0.031
0.039
0.041
b
0.19
0.30
0.007
0.012
c
0.09
0.20
0.004
0.008
D
4.90
5.00
5.10
0.193
0.197
0.201
E
6.20
6.40
6.60
0.244
0.252
0.260
E1
4.30
4.40
4.50
0.169
0.173
0.177
e
0.65
0.026
k
0°
8°
0°
8°
L
0.45
0.60
0.75
0.018
0.024
0.030
L1
1.00
0.039
aaa
0.10
0.004
TSV632, TSV632A, TSV633, TSV633A, TSV634,
TSV634A, TSV635, TSV635A
Ordering information
DocID15688 Rev 6
29/31
6 Ordering information
Table 17: Order codes
Order code
Temperature range
Package (1)
Marking
TSV632AIDT
-40 °C to 125 °C
SO8
TV632A
TSV632AILT
SOT23-8
K145
TSV632AIQ2T
DFN8 2x2
K1P
TSV632AIST
MiniSO8
K145
TSV632IDT
SΟ8
TSV632
TSV632ILT
SOT23-8
K110
TSV632IQ2T
DFN8 2x2
K1N
TSV632IST
MiniSO8
K110
TSV632IYDT
-40 °C to 125 °C,
automotive grade (2)
SΟ8
V632IY
TSV633AIST
-40 °C to 125 °C
MiniSO10
K146
TSV633IST
K111
TSV634AIPT
TSSOP14
TSV634A
TSV634IQ4T
QFN16 3x3
K112
TSV634IPT
TSSOP14
TSV634
TSV634IYPT
-40 °C to 125 °C,
automotive grade (2)
V634IY
TSV635AIPT
-40 °C to 125 °C
TSSOP16
TSV635A
TSV635IPT
TSV635
Notes:
(1)All devices are in tape and reel packing
(2)Qualified and characterized according to AEC Q100 and Q003 or equivalent, advanced screening according to
AEC Q001 and Q002.
Revision history
TSV632, TSV632A, TSV633, TSV633A, TSV634,
TSV634A, TSV635, TSV635A
30/31
DocID15688 Rev 6
7 Revision history
Table 18: Document revision history
Date
Revision
Changes
25-May-2009
1
Initial release.
15-Jun-2009
2
Corrected pin connection diagram in Figure 1.
03-Sep-2009
3
Added root part numbers (TSV63xA) and Table 1: "Device
summary" on cover page.
Added order code TSV632AILT in Table 17: "Order codes".
07-Nov-2011
4
Added DFN8 2x2 package mechanical drawing.
Added ordering information for DFN package to Table 17: "Order
codes".
Corrected unit on Y axis of Figure 16 and Figure 17.
13-Dec-2012
5
Updated Features
Added QFN16 3x3 package
Updated Figure 1: "Pin connections for each package (top view)".
Table 4, Table 6, and Table 7: replaced DVio symbol with ∆Vio/∆T
Table 4, Table 5, Table 6, Table 7 and Table 8: for supply current
parameter, replaced “operator” with “channel”.
Table 17: "Order codes": added automotive order codes and
updated footnote
Deleted TSV632ID/AID from order codes in Table 17: "Order
codes"
29-May-2015
6
Table 4, Table 6, and Table 7: VOH "min" values changed to "max"
values.
Table 17: "Order codes": added order code TSV632AIQ2T,
updated footnote 1.
TSV632, TSV632A, TSV633, TSV633A, TSV634,
TSV634A, TSV635, TSV635A
DocID15688 Rev 6
31/31
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and
improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST
products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order
acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the
design of Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2015 STMicroelectronics – All rights reserved
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
STMicroelectronics:
TSV632AILT TSV632ILT TSV632IQ2T TSV634IQ4T TSV632AIST TSV634IPT TSV635IPT TSV632IDT
TSV632IST TSV634AIPT TSV633AIST TSV632AIDT TSV635AIPT TSV633IST TSV632AIQ2T TSV632IYDT
TSV634IYPT