www.cherryswitches.com
Page 1 of 2, Last saved by 2015-02-26, Specifications subject to change without notice.
Miniature Snap Switch
Single and Double Pole
D4 Series
Features
• Choice of standard or light operating force
• Long life coil spring mechanism
• RoHS compliant
• Cadmium free
• Various aux actuators
• Various terminal types
• Agency approved extended life versions available
Standard Parts
1
D413-R1AA-G2 D429-R1TD-G2 D433-R1AA-G2 D443-R1LD-G2 D449-R1LL-G2 D453-R1RA-G2
D413-R1LA-G2 D429-R1AA-G2 D433-R1LD-G2 D443-R1MD-G2 D449-R1MD-G2 D453-R1RD-G2
D413-R1LD-G2 D429-R1LD-G2 D433-R1RA-G2 D443-R1RA-G2 D449-R1ML-G2 D459-R1AA-G2
D413-R1RA-G2 D429-R1LL-G2 D433-R1RD-G2 D443-R1RD-G2 D449-R1RA-G2 D459-R1LD-G2
D419-R1AA-G2 D429-R1MD-G2 D439-R1LL-G2 D449-R1AA-G2 D449-R1RD-G2 D459-R1LL-G2
D423-R1RA-G2 D429-R1ML-G2 D439-V1ML-G2 D449-R1LD-G2 D453-B8AA-G2 D459-R1ML-G2
D423-R1RD-G2 D443-R1AA-G2 D453-R1AA-G2
1
The part number configuration matrix below provides details to the part numbers above.
For configurable part numbers that are not listed above, not listed in your region, or for custom part numbers, contact the factory or your distributor.
For information on crossing discontinued U.S. only part numbers, see D4 cross-reference chart at www.cherryswitches.com.
Part Number Breakdown
D413-R1AA-G2
(most part numbers end in –G2; see D4 cross-reference chart for exceptions)
Series Contact Rating
2
Configuration
3
D4
1
0.1 A
85
O
C 125
O
C
150
O
C
2 3 A 1
SPST – NO
Standard
Op.
Force
G SPST – NO S
SPST – NO
Light
Op.
Force
3 5 A 2
SPST – NC H SPST – NC T
SPST – NC
4 10 A 3
SPDT M SPDT U
SPDT
5 15 A 7
SPST – NO
Light Op.
Force
N SPST – NO
8 21 A 8
SPST – NC P SPST – NC
9
SPDT R SPDT
2
UL AC current rating; see table on reverse for complete details
3
D48 only available with light operating force
Terminal Type mm (inches)
A1 Welding
Q3 4.8 x 0.8 (0.187 x 0.032) QC, dog leg*
B8 Short solder
R1 4.8 x 0.5 (0.187 x 0.020) QC, straight**
C1 2.8 x 0.8 (0.110 x 0.032) QC, bifurcated straight**
R3 4.8 x 0.5 (0.187 x 0.020) QC, dog leg**
C3 2.8 x 0.8 (0.110 x 0.032) QC, bifurcated dog leg**
S1 Solder with temp stop
P4 1.2 x 0.5 (0.047 x 0.020) PCB, underside*
V1 6.3 x 0.8 (0.250 x 0.032) QC, straight
P5 1.2 x 0.5 (0.047 x 0.020) PCB, rear*
V3 6.3 x 0.8 (0.250 x 0.032) QC, dog leg
PA 1.2 x 0.5 (0.047 x 0.020) PCB, housing side*
W9 Screw*
PB 1.2 x 0.5 (0.047 x 0.020) PCB, cover side*
Y5 6.3 x 0.8 (0.250 x 0.032) QC, 5 mm grid
Q1 4.8 x 0.8 (0.187 x 0.032) QC, straight*
Z5 6.3 x 0.8 (0.250 x 0.032) QC, 7 mm grid
*not available for D48 **not available for D45 or D48
Actuator Type mm (inches)
Actuation length Actuation length
AA Button N/A MA 25.7 (1.01)
JA SS lever, standard ratio 21.2 (0.835) ML 74.4 (2.93)
JD SS lever, standard ratio 35.6 (1.4) RA 20.6 (0.811)
JL SS lever, standard ratio 69.9 (2.75) RD 34.1 (1.34)
KA SS lever, high ratio 25.7 (1.01) SA 20.6 (0.811)
KL SS lever, high ratio 74.4 (2.93) TA 25.1 (0.988)
LA Lever, standard ratio 21.2 (0.835) TD 38.6 (1.52)
LD Lever, standard ratio 35.6 (1.4) UA 25.1 (0.988)
LL Lever, standard ratio 69.9 (2.75)
For actuator details, see D4 actuator reference sheet at www.cherryswitches.com
www.cherryswitches.com
Page 2 of 2, Last saved by 2015-02-26, Specifications subject to change without notice.
Electrical Specifications – Contact Ratings
Contact
EN61058
UL1054
1 0.1 (0.5) A, 250 VAC; 0.5 A, 30 VDC; 1 (1) A, 250 VAC 0.1 A, 125/250 VAC; 0.5 A, 30 VDC; 1 A, 125 VAC
2 3 (1) A, 250 VAC 3 A, 125/250 VAC; 1/10 HP, 250 VAC
3 6 (2) A, 250 VAC 5 A, 125/250 VAC; ¼ HP, 250 VAC
4 10 (3) A, 250 VAC 10 A, 125/250 VAC; 6 A, 30 VDC; ½ HP, 125/250 VAC
5 16 (4) A, 250 VAC 15 A, 125/250 VAC; ½ HP, 125-250 VAC
8 21 (8) A, 250 VAC 21 A, 250 VAC; 1 HP, 125 VAC; 2 HP, 250 VAC
UL file number E314201
Environmental and Mechanical Specifications
Operating Temperature -40
O
C to 85, 125 or 150
O
C (-40
O
F to 185
, 257 or 302
O
F)
Flammability Rating UL 94V-0
Operating life – electrical life at rated load, 85
O
C
Contact EN61058 UL1054
4
1 50,000 6,000
2 50,000 6,000
3 50,000 6,000
4 50,000 6,000
5 50,000 6,000
7 10,000 6,000
4Extended life available
Material Specifications
Case Thermoplastic Polyester PET
Cover Thermoplastic Polyester PET
Actuating Button Thermoplastic Acetyl (POM) 85
O
C, Thermoplastic Polyester (PET) 125 or 150
O
C
Contacts Gold Cross Point (D41), Silver (D42), Silver Alloy (D43-D48)
Terminals Brass
Auxiliary Actuator Stainless Steel or Cold-Rolled Steel (Nickel Plated)
Moving Blade Silver Plated Brass
Environmental Specifications
Ambient Temperature -40
O
C to 85
O
C/120
O
C (-40
O
F to 185
O
F/248
O
F)
Operating Force 70 – 280 cN (model dependent, without actuator)
Total Travel 1.6 mm
Ingress Protection IP50
Dimensions mm (inches) and terminal configurations
* Connector part #823-0518
(mates with Y5 only); housing for
RAST 5 QC terminals
Actuators
