Miniature Snap Switch Single and Double Pole D4 Series Features * * * * Choice of standard or light operating force Long life coil spring mechanism RoHS compliant Cadmium free * * * Various aux actuators Various terminal types Agency approved extended life versions available 1 Standard Parts D413-R1AA-G2 D413-R1LA-G2 D413-R1LD-G2 D413-R1RA-G2 D419-R1AA-G2 D423-R1RA-G2 D423-R1RD-G2 D429-R1TD-G2 D429-R1AA-G2 D429-R1LD-G2 D429-R1LL-G2 D429-R1MD-G2 D429-R1ML-G2 D433-R1AA-G2 D433-R1LD-G2 D433-R1RA-G2 D433-R1RD-G2 D439-R1LL-G2 D439-V1ML-G2 D443-R1AA-G2 D443-R1LD-G2 D443-R1MD-G2 D443-R1RA-G2 D443-R1RD-G2 D449-R1AA-G2 D449-R1LD-G2 D449-R1LL-G2 D449-R1MD-G2 D449-R1ML-G2 D449-R1RA-G2 D449-R1RD-G2 D453-B8AA-G2 D453-R1AA-G2 D453-R1RA-G2 D453-R1RD-G2 D459-R1AA-G2 D459-R1LD-G2 D459-R1LL-G2 D459-R1ML-G2 1 The part number configuration matrix below provides details to the part numbers above. For configurable part numbers that are not listed above, not listed in your region, or for custom part numbers, contact the factory or your distributor. For information on crossing discontinued U.S. only part numbers, see D4 cross-reference chart at www.cherryswitches.com. D413-R1AA-G2 (most part numbers end in -G2; see D4 cross-reference chart for exceptions) Part Number Breakdown Series D4 Contact Rating2 1 0.1 A 2 3A 3 5A 4 10 A 5 15 A 8 21 A Configuration3 O 125 OC 85 C 1 2 3 7 8 9 SPST - NO SPST - NC SPDT SPST - NO SPST - NC SPDT Standard Op. Force Light Op. Force G H M N P R SPST - NO SPST - NC SPDT SPST - NO SPST - NC SPDT 150 OC S T U SPST - NO SPST - NC SPDT 2 UL AC current rating; see table on reverse for complete details D48 only available with light operating force 3 A1 Welding B8 Short solder C1 2.8 x 0.8 (0.110 C3 2.8 x 0.8 (0.110 P4 1.2 x 0.5 (0.047 P5 1.2 x 0.5 (0.047 PA 1.2 x 0.5 (0.047 PB 1.2 x 0.5 (0.047 Q1 4.8 x 0.8 (0.187 *not available for D48 x 0.032) QC, bifurcated straight** x 0.032) QC, bifurcated dog leg** x 0.020) PCB, underside* x 0.020) PCB, rear* x 0.020) PCB, housing side* x 0.020) PCB, cover side* x 0.032) QC, straight* **not available for D45 or D48 Q3 R1 R3 S1 V1 V3 W9 Y5 Z5 Terminal Type mm (inches) 4.8 x 0.8 (0.187 x 0.032) QC, dog leg* 4.8 x 0.5 (0.187 x 0.020) QC, straight** 4.8 x 0.5 (0.187 x 0.020) QC, dog leg** Solder with temp stop 6.3 x 0.8 (0.250 x 0.032) QC, straight 6.3 x 0.8 (0.250 x 0.032) QC, dog leg Screw* 6.3 x 0.8 (0.250 x 0.032) QC, 5 mm grid 6.3 x 0.8 (0.250 x 0.032) QC, 7 mm grid Actuator Type mm (inches) Actuation length Actuation length AA Button N/A MA 25.7 (1.01) JA SS lever, standard ratio 21.2 (0.835) ML 74.4 (2.93) JD SS lever, standard ratio 35.6 (1.4) RA 20.6 (0.811) JL SS lever, standard ratio 69.9 (2.75) RD 34.1 (1.34) KA SS lever, high ratio 25.7 (1.01) SA 20.6 (0.811) KL SS lever, high ratio 74.4 (2.93) TA 25.1 (0.988) LA Lever, standard ratio 21.2 (0.835) TD 38.6 (1.52) LD Lever, standard ratio 35.6 (1.4) UA 25.1 (0.988) LL Lever, standard ratio 69.9 (2.75) For actuator details, see D4 actuator reference sheet at www.cherryswitches.com www.cherryswitches.com Page 1 of 2, Last saved by 2015-02-26, Specifications subject to change without notice. Light Op. Force Electrical Specifications - Contact Ratings Contact 1 2 3 4 5 8 EN61058 0.1 (0.5) A, 250 VAC; 0.5 A, 30 VDC; 1 (1) A, 250 VAC 3 (1) A, 250 VAC 6 (2) A, 250 VAC 10 (3) A, 250 VAC 16 (4) A, 250 VAC 21 (8) A, 250 VAC UL1054 0.1 A, 125/250 VAC; 0.5 A, 30 VDC; 1 A, 125 VAC 3 A, 125/250 VAC; 1/10 HP, 250 VAC 5 A, 125/250 VAC; 1/4 HP, 250 VAC 10 A, 125/250 VAC; 6 A, 30 VDC; 1/2 HP, 125/250 VAC 15 A, 125/250 VAC; 1/2 HP, 125-250 VAC 21 A, 250 VAC; 1 HP, 125 VAC; 2 HP, 250 VAC UL file number E314201 Environmental and Mechanical Specifications -40 OC to 85, 125 or 150 OC (-40 OF to 185 , 257 or 302 OF) UL 94V-0 Operating Temperature Flammability Rating Operating life - electrical life at rated load, 85 OC Contact EN61058 1 50,000 2 50,000 3 50,000 4 50,000 5 50,000 7 10,000 UL10544 6,000 6,000 6,000 6,000 6,000 6,000 4 Extended life available Material Specifications Case Cover Actuating Button Contacts Terminals Auxiliary Actuator Moving Blade Thermoplastic Polyester PET Thermoplastic Polyester PET Thermoplastic Acetyl (POM) 85 OC, Thermoplastic Polyester (PET) 125 or 150 OC Gold Cross Point (D41), Silver (D42), Silver Alloy (D43-D48) Brass Stainless Steel or Cold-Rolled Steel (Nickel Plated) Silver Plated Brass Environmental Specifications -40 OC to 85 OC/120 OC (-40 OF to 185 OF/248 OF) 70 - 280 cN (model dependent, without actuator) 1.6 mm IP50 Ambient Temperature Operating Force Total Travel Ingress Protection Dimensions mm (inches) and terminal configurations Actuators * Connector part #823-0518 (mates with Y5 only); housing for RAST 5 QC terminals www.cherryswitches.com Page 2 of 2, Last saved by 2015-02-26, Specifications subject to change without notice.