JANS1N5811-LC - MICROSEMI - searchdatasheet.com

40 KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com

Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 10/23/15

resistors

TP: 0402 only: 7" 2mm pitch

punched paper

TD: 0603, 0805, 1206, 1210:

7" 4mm pitch punched paper

TDD: 0603, 0805, 1206,

1210: 10" paper tape

TE: 0805, 1206, 1210:

7" embossed plastic

TED: 0805, 1206, 1210:

10" embossed plastic

For further information on packaging,

please refer to Appendix A

RN73H

high heat resistance, high reliability

metal film chip resistor

features

dimensions and construction

ordering information

• High precision type ±0.05% is available

with standard products

• Improved moisture resistance by glass passivation layer

• High reliability and high stability at elevated temperatures

• Low current noise

• Products with lead-free terminations meet

EU RoHS requirements

• Rated ambient temperature: 85°C, rated up to +155°C

• AEC-Q200 Qualified: 0402 (1E), 0603 (1J), 0805 (2A),

1206 (2B), 1210 (2E)

Protective

Coating

dInner

Electrode

Solder

Plating

Resistive

Film

Ceramic

Substrate

A: ±0.05%

B: ±0.1%

C: ±0.25%

D: ±0.5%

F: ±1.0%

100

T: Sn

G: Au (1E,

1J only)

3 significant

figures +

1 multiplier

“R” indicates

decimal on

value <100Ω

1E: 0.063W

1J: 0.1W

2A: 0.125W

2B: 0.25W

2E: 0.25W

RN73H

Type Size Nominal

Resistance Resistance

Tolerance T.C.R.

(ppm/°C)

Termination

Material Packaging

2B TD 1002 B 25T

Type

.012 +.008

-.004

(0.3 +0.2)

-0.1

.016 +.008

-.004

(0.4 +0.2)

-0.1

.018±.004

(0.45±0.1)

.012±.004

(0.3±0.1)

.02±.004

(0.5±0.1)

.024±.004

(0.6±0.1)

.012±.004

(0.3±0.1)

.016±.008

(0.4±0.2)

.02±.012

(0.5±0.3)

.063±.008

(1.6±0.2)

.098±.008

(2.5±0.2)

.126±.008

(3.2±0.2)

.049±.008

(1.25±0.2)

.031±.004

(0.8±0.1)

.063±.008

(1.6±0.2)

.079±.008

(2.0±0.2)

(0603)

.014±.002

(0.35±0.05)

.010 +.002

-.004

(0.25 +0.05)

-0.1

.010±.004

(0.25±0.1)

.020±.002

(0.5±0.05)

.039 +.004

-.002

(1.0 +0.1)

-0.05

(0402)

(0805)

(1206)

(Inch Size Code) Wc d t

Dimensions inches (mm)

(1210)

Derating Curve

% Rated Power

100

-60 -40 -20 04060 80 100 140

Ambient Temperature

(°C)

-55

120

155

160

For resistors operated at an ambient temperature of 85°C or above, a

power rating shall be derated in accordance with the above derating curve.

% Rated Power

100

-60 -40 -20 0 40 60 80

100

140

Terminal Part Temperature

(°C)

-55

120

155

160

95 110

1E (90°C)

1J (95°C)

2A (100°C)

2B, 2E (110°C)

For resistors operated terminal part temperature of described for each size

or above, a power rating shall be derated in accordance with derating curve.

Please refer to “Introduction of the derating curves based on the terminal

part temperature” in the beginning of our catalog before use.

RN73H

high heat resistance, high reliability

metal film chip resistor

Maximum

Working

Voltage

Resistance Range (Ω)

E-24, E-96, E-192*

(B±0.1%)(A±0.05%) (C±0.25%) (D±0.5%)

±5

±100

±50

±5

±100

±50

±10

±100

±50

±5

±10

(F±1.0%)

Part

Designation

Maximum

Overload

Voltage

Rated

Ambient

Temp.

Power

Rating

@ 85°C

T.C.R.

(ppm/°C)

Max.

applications and ratings

1/10W

(.10W)

1/8W

(.125W)

1/4W

(.25W)

1/4W

(.25W)

75V 150V

150V 300V

200V 400V

100 - 59k

—

47 - 100k

—

47 - 1M

100 - 510k 100 - 510k

100 - 300k

47 - 300k

—

±100

±50

—

100 - 59k

47 - 59k

47 - 360k

——

47 - 360k

Rated

Terminal

Part

Temp.

—

10 - 1.5M

10 - 1M

* No marking on E-192 values Operating Temperature: -55°C to +155°C

100 - 100k

—

±10

47 - 1M

100 - 100k

47 - 100k 47 - 1M 47 - 1M

±10

—

47 - 1M

RN73H2E ±25

51 - 510k

15 - 1M

—

RN73H1J

1/16W

(.063W)

RN73H1E

±25

15 - 1M

10 - 1M

RN73H2A ±25

15 - 1.5M

RN73H2B ±25

10 - 1M

100 - 300k

47 - 300k

47 - 1M

environmental applications

100 - 510k

—

47 - 59k

—

15 - 1M

100 - 510k

—

47 - 360k

15 - 1M

15 - 1M 15 - 1M

15 - 1.5M

15 - 1.5M 15 - 1.5M

15 - 1M

15 - 1M 15 - 1M

—

15 - 1M

15 - 1M 15 - 1M

—

47 - 1M

100 - 510k

—

47 - 360k

10 - 1.5M

10 - 1.5M10 - 1.5M

10 - 1M

10 - 1M10 - 1M

—

47 - 1M

10 - 1M

10 - 1M10 - 1M

±10

±25 50V 100V

— 47 - 10k

—

47 - 300k

47 - 10k 47 - 10k

47 - 300k

±50

85°C

110°C

95°C

100°C

110°C

90°C

47 - 300k

—

47 - 300k

47 - 10k

47 - 300k

10 - 300k10 - 300k

10 - 1M

10 - 1M10 - 1M

—

For Surface Temperature Rise Graph see Environmental Applications. Additional environmental applications can also be found at www.koaspeer.com

Performance Characteristics

Parameter

Requirement ∆ R ±(%+0.05Ω)

Limit Typical Test Method

Resistance

T.C.R.

25°C

+25°C/+125°C: T.C.R. +5 (x10-6K); +15°C/-55°C and +25°C/+155°C: other

Within specified tolerance

Within specified T.C.R.

—

Overload (Short time) Rated Voltage x 2.5 or Max. overload voltage, whichever is less for 5 seconds

±0.05% ±0.01%

Resistance to Solder Heat 260°C ± 5°C, 10 seconds ± 1 second

±0.05%* ±0.01%

Rapid Change of Temperature 1E, 1J, 2A: -55°C (30 minutes), +155°C (30 minutes), 1000 cycles

2B, 2E: -55°C (30 minutes), +155°C (30 minutes), 500 cycles

±0.1%* ±0.02%

Moisture Resistance 85°C ± 2°C, 85%±5%RH, 1000 hours; 1.5 hr ON, 0.5 hr OFF cycle

±0.1%* ±0.05%

Endurance at 85°C 85°C ± 2°C, 3000 hours, 1.5 hr ON, 0.5 hr OFF cycle

±0.1%* ±0.03%

High Temperature Exposure +155°C, 1000 hours

±0.1%* ±0.05%

* Depends on resistance value, please contact KOA Speer for details.

• The properly and electrostatically measured taping materials are used for the components, but attention should be paid to the fact that there is some danger the parts

absorb on the top tapes to cause a failure in the mounting and the parts are destructed by static electricity (1J, 2A, 2B, 2E: 1kV and more, 1E: 0.5kV and more at Human

Body Model 100pF, 1.5kΩ) to change the resistance in the conditions of an excessive dryness or after the parts are given vibration for a long time as they are packaged

on the tapes. Similarly, care should be given not to apply the excessive static electricity when mounting on the boards.

• Ionic impurities such as flux etc. that are attached to these products or those mounted onto a PCB, negatively affect their moisture resistance, corrosion resistance, etc.

The flux may contain ionic substances like chlorine, acid, etc. while perspiration and saliva include ionic impurities like sodium (Na＋), chlorine (Cl−) etc. Therefore these

kinds of ionic substances may induce electrical corrosion when they invade into the products. Either thorough washing or using RMA solder and flux are necessary since

lead free solder contains ionic substances. Washing process is needed, before putting on moisture proof material in order to prevent electrical corrosion.

• Please pay attention that the top of an iron does not direct touch to the components. There is a risk that may cause a change in resistance. Take care that another risk

may happen that the protecting coat is carbonized in an instant when touched directly by the top of the iron, also climatic-proof for electric corrosion or insulation of

protecting coat may be dropped down. Be sure not to give high temperature on the top of the iron as it will degrade the protecting coat.

• Avoid storing components under direct sun rays, high temperature/humidity. Direct sun rays will cause quality change of taping and difficulty of keeping appropriate peeling

strength. 5~35°C/35~75%RH, there is no deterioration of solderability for 12 months, but take special care for storing, because condensation, dust, and toxic gas like

hydrogen sulfide, sulfurous acid gas, hydrogen chloride, etc. may drop solderability.

●The upper electrodes could be peeled off when a heat-resistant masking tape is attached to the mounted chip resistors and then detached from them. It is confirmed that

the adhesiveness gets stronger due to the exposure to heat under mounting. Accordingly, we recommend the use of masking tape be refrained. If the use of heat-resistant

masking tape is unavoidable, please make sure that the adhesives on the tape do not directly come in contact with the product.

Precautions for Use

KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com

Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 11/06/17

resistors