2011-08-26 DURIS E 3 Datasheet Version 1.0 LCW JNSH.EC The DURISTM E 3 combines high efficacy and a wide beam angle into a compact format (3.0 mm x 1.4 mm). This is key to homogeneous illumination applications where the DURISTM E 3 never fails to impress with its performance on system level. Die DURISTM E 3 kombiniert hohe Effizienz und einen weiten Abstrahlwinkel in einer kompakten Bauform (3,0 mm x 1,4 mm). Speziell fur Anwendungen mit besonders homogener Lichtverteilung kann die DURISTM E 3 mit ihrer Leistung auf Systemebene uberzeugen. Features: * Package: white SMT package, colored diffused Besondere Merkmale: (warm white) at 5000 K * ESD-withstand voltage: up to 2 kV acc. to JESD22-A114-D * Gehausetyp: weies SMT Gehause, farbiger Silikon diffuser Vergu * Technologie: InGaN on Sapphire * Abstrahlwinkel bei 50 % IV: 110 * Farbe: warm wei; CRI (typ.) = 85; CTR = 5000 K * Optischer Wirkungsgrad (typ.): 112 lm/W (warm wei) at 5000 K * ESD-Festigkeit: ESD-sicher bis 2 kV nach JESD22-A114-D Applications Anwendungen * Retrofit lamps * Linear indoor applications: fluorescent replacement, floor lighting, retail/shop and office lighting * Task lights * White goods * Lampenretrofits * Ersatz fur Leuchtstoffrohren, Gebaudeinnenbeleuchtung beispielsweise fur Treppenhauser, Geschafte und Buros * Schreibtischlampen * Weie Ware silicone resin * * * * Technology: InGaN on Sapphire Viewing angle at 50 % IV: 110 Color: warm white; CRI (typ.) = 85; CTR = 5000 K Optical efficiency (typ.): 112 lm/W 2011-08-26 1 Version 1.0 LCW JNSH.EC Ordering Information Bestellinformation Type Luminous Intensity 1) Color Temperature Ordering Code page 24 Typ Lichtstarke 1) Seite Farbtemperatur 24 Bestellnummer IF = 20 mA IV [mcd] LCW JNSH.EC-BRBT-5H7I-1 5000 2100 ... 2590 Q65111A1685 LCW JNSH.EC-BQBS-5L7N1 4000 1940 ... 2400 Q65111A1963 LCW 4000 JNSH.EC-BRBT-5L7N-1 2100 ... 2590 Q65111A1674 3500 LCW JNSH.EC-BQBS-5O8Q1 1940 ... 2400 Q65111A2247 LCW JNSH.EC-BQBS-5R8T1 3000 1940 ... 2400 Q65111A1682 LCW JNSH.EC-BPBR-5U8X1 2700 1800 ... 2240 Q65111A1847 Note: The above Type Numbers represent the order groups which include only a few brightness groups (see page 5 for explanation). Only one group will be shipped on each packing unit (there will be no mixing of two groups on each packing unit). E. g. LCW JNSH.EC-BRBT-5L7N-1 means that only one group BR, BS, BT will be shippable for any packing unit. In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one packing unit. E. g. LCW JNSH.EC-BRBT-5L7N-1 means that only one wavelength group 5L, 5M, 5N, 6L, 6M, 6N, 7L, 7M, 7N will be shippable. LCW JNSH.EC-BRBT-5L7N-1 means that the device will be shipped within the specified limits as stated on page 6, 7, 8, 9, 10. In order to ensure availability, single wavelength groups will not be orderable (see page 6, 7, 8, 9, 10 for explanation). In a similar manner for colors where forward voltage groups are measured and binned, single forward voltage groups will be shipped on any packing unit. E. g. LCW JNSH.EC-BRBT-5L7N-1 means that only one forward voltage group L, M, N will be shippable. In order to ensure availability, single wavelength groups will not be orderable (see page 5 for explanation). Anm.: Die oben genannten Typbezeichnungen umfassen die bestellbaren Selektionen. Diese bestehen aus wenigen Helligkeitsgruppen (siehe Seite 5 fur nahere Informationen). Es wird nur eine einzige Helligkeitsgruppe pro Verpackungseinheit geliefert. Z. B. LCW JNSH.EC-BRBT-5L7N-1 bedeutet, dass in einer Verpackungseinheit nur eine der Helligkeitsgruppen BR, BS, BT enhalten ist. Um die Liefersicherheit zu gewahrleisten, konnen einzelne Helligkeitsgruppen nicht bestellt werden. Gleiches gilt fur die Farben, bei denen Wellenlangengruppen gemessen und gruppiert werden. Pro Verpackungseinheit wird nur eine Wellenlangengruppe geliefert. Z. B. LCW JNSH.EC-BRBT-5L7N-1 bedeutet, dass in einer Verpackungseinheit nur eine der Wellenlangengruppen 5L, 5M, 5N, 6L, 6M, 6N, 7L, 7M, 7N enthalten ist (siehe Seite 6, 7, 8, 9, 10 fur nahere Informationen). LCW JNSH.EC-BRBT-5L7N-1 bedeutet, dass das Bauteil innerhalb der auf Seite 6, 7, 8, 9, 10 spezifizierten Grenzen geliefert wird. Um die Liefersicherheit zu gewahrleisten, konnen einzelne Wellenlangengruppen nicht bestellt werden. Gleiches gilt fur die LEDs, bei denen die Durchlassspannungsgruppen gemessen und gruppiert werden. Pro Verpackungseinheit wird nur eine Durchlassspannungsgruppe geliefert. Z. B. LCW JNSH.EC-BRBT-5L7N-1 bedeutet, dass nach Durchlassspannungsgruppen gruppiert wird. In einer Verpackungseinheit ist nur eine der Durchlassspannungsgruppen L, M, N enthalten (siehe Seite 5 fur nahere Informationen). Um die Liefersicherheit zu gewahrleisten, konnen einzelne Durchlassspannungsgruppen nicht direkt bestellt werden. 2011-08-26 2 Version 1.0 LCW JNSH.EC Maximum Ratings Grenzwerte Parameter Symbol Values Bezeichnung Symbol Werte Unit Einheit Operating temperature range Betriebstemperatur Top -40 ... 85 C Storage temperature range Lagertemperatur Tstg -40 ... 100 C Junction temperature Sperrschichttemperatur Tj 110 C Forward current Durchlassstrom (TS = 25 C) IF 30 mA Surge current Stostrom (t <= 10 s, D = 0.005, TS = 25 C) IFM 100 mA Reverse voltage 2) page 24 Sperrspannung 2) Seite 24 (TS = 25 C) VR 5 2011-08-26 3 V Version 1.0 LCW JNSH.EC Characteristics (TS = 25 C, IF = 20 mA) Kennwerte Parameter Symbol Values Bezeichnung Symbol Werte Viewing angle at 50 % IV Abstrahlwinkel bei 50 % Iv Forward voltage * 3) page 24 Durchlassspannung * 3) Seite 24 Unit Einheit (typ.) 2 110 (min.) (typ.) (max.) VF VF VF 2.80 3.05 3.40 V V V IR not designed for reverse operation Reverse current Sperrstrom "Electrical" thermal resistance junction / solder point ** "Elektrischer" Warmewiderstand Sperrschicht / Lotpad ** (with efficience LED = 20 %) (typ.) Rth JS el 100 K/W Real thermal resistance junction / solder point ** Realer Warmewiderstand Sperrschicht / Lotpad ** (max.) (typ.) Rth JS real Rth JS real 162 125 K/W K/W Thermal resistance junction / ambient 4) page 24 Warmewiderstand Sperrschicht / Umgebung 4) Seite 24 (typ.) RthJA 280 K/W Note: * Individual groups on page 5 Anm.: * Einzelgruppen siehe Seite 5 ** Rth max based on statistic values (6) ** Rth max basiert auf statistischen Werten (6) 2011-08-26 4 Version 1.0 LCW JNSH.EC Brightness Groups Helligkeits-Gruppierungsschema Brightness 1) page Group Gruppe Lichtstarke 24 Brightness 1) page 1) Seite 24 Lichtstarke 24 1) Seite 24 Luminous Flux 5) page Lichtstrom 24 5) Seite 24 (min.) Iv [mcd] (max.) Iv [mcd] (typ.) V [mlm] BP 1800 1940 5600 BQ 1940 2100 6100 BR 2100 2240 6500 BS 2240 2400 7000 BT 2400 2590 7500 Note: The standard shipping format for serial types includes either a lower family group, an upper family group or a grouping of all individual brightness groups of only a few brightness groups. Individual brightness groups cannot be ordered. Anm.: Die Standardlieferform von Serientypen beinhaltet entweder eine untere Familiengruppe, eine obere Familiengruppe oder eine Sammelgruppe, die aus nur wenigen Helligkeitsgruppen bestehen. Einzelne Helligkeitsgruppen sind nicht bestellbar. Forward Voltage Groups 3) page 24 Durchlassspannungsgruppe 3) Seite 24 Group (min.) VF [V] (max.) VF [V] L Gruppe 2.80 3.00 M 3.00 3.20 N 3.20 3.40 2011-08-26 5 Version 1.0 LCW JNSH.EC Chromaticity coordinate groups 6) page Farbortgruppen 6) Seite 24 24 0.56 Cy 0.54 0.52 0.9 0.50 520 530 Cy 0.8 0.48 540 510 0.46 550 0.7 0.44 560 0.6 0.5 0.4 0.3 490 0.38 0.1 0 0.32 8 7 6 5 4500 K 5000 K 0.36 480 470 460 450 2700 K 4000 K 0.40 0.34 0.2 0 580 590 600 610 620 630 E 3000 K 3500 K 0.42 570 500 7 6 5 + H I J K L M N O P Q T UV RS WX 0.30 0.28 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 Cx 0.26 0.48 0.50 0.46 0.42 0.44 0.38 0.40 0.36 0.32 0.22 0.34 0.24 Cx OHA04327 6) page 24 Color Chromaticity Groups Farbortgruppen 6) Seite 24 Color Temperature 2700K 6) page Farbtemperatur 2700K 6) Seite 24 Group Gruppe 5U 6U 7U 2011-08-26 Cx 24 Cy Group Gruppe Cy 0.4483 0.3918 0.3985 0.4534 0.4011 0.3906 0.4538 0.3931 0.4591 0.4024 0.4373 0.3893 0.4420 0.4428 0.4477 0.3998 0.4420 0.3985 0.4467 5W Cx 6W 0.4534 0.4011 0.4076 0.4585 0.4104 0.4477 0.3998 0.4591 0.4024 0.4526 0.4090 0.4644 0.4118 0.4467 0.4076 0.4585 0.4104 0.4515 0.4168 0.4636 0.4197 0.4526 0.4090 0.4644 0.4118 0.4576 0.4182 0.4697 0.4211 7W 6 Version 1.0 Group Gruppe LCW JNSH.EC Cx 8U 5V 6V 7V 8V Cy 0.4515 0.4168 0.4562 0.4576 5R 2011-08-26 Cx 0.4197 0.4260 0.4688 0.4290 0.4182 0.4697 0.4211 0.4750 0.4304 0.4625 0.4275 0.3906 0.4477 8W Cy 0.4636 0.4428 0.4538 0.3931 0.3998 0.4591 0.4024 0.4483 0.3918 0.4593 0.3944 0.4534 0.4011 0.4648 0.4038 0.4477 0.3998 0.4591 0.4024 0.4526 0.4090 0.4644 0.4118 0.4534 0.4011 0.4648 0.4038 0.4703 0.4132 0.4585 0.4104 0.4526 0.4090 0.4576 5X 6X 0.4644 0.4118 0.4182 0.4697 0.4211 0.4585 0.4104 0.4703 0.4132 0.4636 0.4197 0.4758 0.4225 0.4576 0.4182 0.4697 0.4211 0.4625 0.4275 0.4750 0.4304 0.4636 0.4197 0.4758 0.4225 0.4688 0.4290 0.4813 0.4319 Color Temperature 3000K 6) page Farbtemperatur 3000K 6) Seite 24 Group Gruppe Group Gruppe Cx 7X 8X 24 Cy Group Gruppe 7S Cx Cy 0.4147 0.3814 0.4304 0.4018 0.4185 0.3902 0.4346 0.4108 0.4222 0.3840 0.4386 0.4047 0.4263 0.3929 0.4430 0.4138 7 Version 1.0 Group Gruppe LCW JNSH.EC Cx 6R 7R 8R 5S 6S Cy 0.4185 0.3902 0.4223 0.4263 5O 2011-08-26 Cx 0.4108 0.3989 0.4387 0.4197 0.3929 0.4430 0.4138 0.4474 0.4228 0.4304 0.4018 0.3989 0.4261 8S Cy 0.4346 0.4223 0.4298 0.3867 0.4077 0.4342 0.3957 0.4304 0.4018 0.4373 0.3893 0.4346 0.4108 0.4420 0.3985 0.4261 0.4077 0.4342 0.3957 0.4299 0.4165 0.4386 0.4047 0.4346 0.4108 0.4420 0.3985 0.4467 0.4076 0.4387 0.4197 0.4222 0.3840 0.4263 5T 6T 0.4386 0.4047 0.3929 0.4430 0.4138 0.4298 0.3867 0.4467 0.4076 0.4342 0.3957 0.4515 0.4168 0.4263 0.3929 0.4430 0.4138 0.4304 0.4018 0.4474 0.4228 0.4342 0.3957 0.4515 0.4168 0.4386 0.4047 0.4562 0.4260 Color Temperature 3500K 6) page Farbtemperatur 3500K 6) Seite 24 Group Gruppe Group Gruppe Cx 7T 8T 24 Cy Group Gruppe 7P Cx Cy 0.3889 0.3690 0.4036 0.3898 0.3916 0.3771 0.4067 0.3982 0.3975 0.3731 0.4129 0.3944 0.4006 0.3815 0.4164 0.4029 8 Version 1.0 Group Gruppe LCW JNSH.EC Cx 6O 7O 8O 5P 6P Cy 0.3916 0.3771 0.3943 0.4006 5L 2011-08-26 Cx 0.3982 0.3852 0.4097 0.4065 0.3815 0.4164 0.4029 0.4198 0.4115 0.4036 0.3898 0.3852 0.3969 8P Cy 0.4067 0.3943 0.4061 0.3773 0.3934 0.4095 0.3858 0.4036 0.3898 0.4147 0.3814 0.4067 0.3982 0.4185 0.3902 0.3969 0.3934 0.4095 0.3858 0.3996 0.4015 0.4129 0.3944 0.4067 0.3982 0.4185 0.3902 0.4223 0.3989 0.4097 0.4065 0.3975 0.3731 0.4006 5Q 6Q 0.4129 0.3944 0.3815 0.4164 0.4029 0.4061 0.3773 0.4223 0.3989 0.4095 0.3858 0.4261 0.4077 0.4006 0.3815 0.4164 0.4029 0.4036 0.3898 0.4198 0.4115 0.4095 0.3858 0.4261 0.4077 0.4129 0.3944 0.4299 0.4165 Color Temperature 4000K 6) page Farbtemperatur 4000K 6) Seite 24 Group Gruppe Group Gruppe Cx 7Q 8Q 24 Cy Group Gruppe 7M Cx Cy 0.3670 0.3578 0.3799 0.3828 0.3692 0.3677 0.3826 0.3931 0.3746 0.3624 0.3885 0.3882 0.3773 0.3726 0.3916 0.3987 9 Version 1.0 Group Gruppe LCW JNSH.EC Cx 6L 7L 5M 6M Cy 0.3692 0.3677 0.3714 0.3773 5H 6H 2011-08-26 Cx 0.3670 0.3775 0.3853 0.3776 0.3726 0.3898 0.3716 0.3934 0.3825 0.3799 0.3828 0.3775 0.3736 5N Cy 0.3822 0.3714 0.3853 0.3776 0.3874 0.3885 0.3882 0.3799 0.3828 0.3934 0.3825 0.3826 0.3931 0.3970 0.3935 0.3746 0.3624 0.3885 0.3882 0.3773 0.3726 0.3916 0.3987 0.3822 0.3670 0.3970 0.3935 0.4006 0.4044 0.3853 0.3776 0.3773 0.3726 0.3799 0.3828 0.3853 0.3776 0.3885 0.3882 Color Temperature 5000K 6) page Farbtemperatur 5000K 6) Seite 24 Group Gruppe Group Gruppe Cx 6N 7N 24 Cy Group Gruppe Cy 0.3440 0.3428 0.3451 0.3448 0.3515 0.3428 0.3515 0.3487 0.3515 0.3527 0.3578 0.3366 0.3369 0.3369 0.3440 0.3448 5I Cx 0.3369 0.3451 0.3448 0.3515 0.3373 0.3534 0.3456 0.3601 0.3448 0.3515 0.3527 0.3578 0.3456 0.3601 0.3539 0.3669 6I 10 Version 1.0 Group Gruppe LCW JNSH.EC Cx 7H Cy Group Gruppe 0.3373 0.3534 0.3376 0.3456 0.3464 Cx 7I Cy 0.3456 0.3601 0.3616 0.3464 0.3688 0.3601 0.3539 0.3669 0.3688 0.3551 0.3760 Group Name on Label Gruppenbezeichnung auf Etikett Example: BS-5H-L Beispiel: BS-5H-L Brightness Group Helligkeitsgruppe Wavelength / Chromaticity coordinate group Wellenlange / Farbortgruppe Forward Voltage Group Durchlassspannungsgruppe BS 5H L Note: No packing unit / tape ever contains more than one group for each selection. Anm.: In einer Verpackungseinheit / Gurt ist immer nur eine Gruppe fur jede Selektion enthalten. 2011-08-26 11 Version 1.0 LCW JNSH.EC Relative Spectral Emission - V() = Standard eye response curve 5) page 24 , 1) page 24 Relative spektrale Emission - V() = spektrale Augenempfindlichkeit 5) Seite 24 , 1) Seite 24 Irel = f (); TS = 25 C; IF = 20 mA v rel 1,0 4000K 0,9 : V 0,8 0,7 0,6 0,5 0,4 0,3 0,2 0,1 0,0 400 450 Radiation Characteristics 5) page Abstrahlcharakteristik 5) Seite 24 500 550 600 650 700 750 800 [nm] 24 Irel = f (); TS = 25 C -30 -20 -10 [] 0 10 20 30 40 50 60 70 80 90 100 1.0 v rel 0.9 -40 0.8 -50 0.7 0.6 -60 0.5 0.4 -70 0.3 0.2 -80 0.1 -90 0.0 -100 2011-08-26 12 Version 1.0 LCW JNSH.EC Forward Current 5) page 24 Durchlassstrom 5) Seite 24 Relative Luminous Intensity 5) page Relative Lichtstarke 5) Seite 24 IF = f (VF); TS = 25 C IV/IV(20 mA) = f(IF); TS = 25 C 100 F [mA] 24 V 4.0 V (20mA) 3.5 80 3.0 2.5 60 2.0 1.5 40 1.0 20 0.5 0.0 2,6 2,8 3,0 3,2 3,4 3,6 3,8 4,0 VF [V] Chromaticity Coordinate Shift 5) page Farbortverschiebung 5) Seite 24 24 Cx, Cy = f(IF); TS = 25 C Cx, Cy 0.03 : Cx : Cy 0.02 0.01 0.00 4000K -0.01 -0.02 -0.03 2011-08-26 50 100 F [mA] 13 50 100 F [mA] Version 1.0 LCW JNSH.EC Relative Forward Voltage 5) page 24 Relative Vorwartsspannung 5) Seite Relative Luminous Intensity 5) page Relative Lichtstarke 5) Seite 24 24 VF-VF (25C) [V] VF = VF - VF(25C) = f(Tj); IF = 20 mA 24 IV/IV(25)C = f(Tj); IF = 20 mA V 1,2 V (25C) 0,4 1,0 0,2 0,8 0,0 0,6 0,4 -0,2 0,2 -0,4 -40 -20 0 20 40 60 80 Chromaticity Coordinate Shift 5) page Farbortverschiebung 5) Seite 24 0,0 -40 -20 100 Tj [C] 24 Cx, Cy = f(Tj); IF = 20 mA 0,03 Cx; Cy : Cx : Cy 0,02 0,01 4000 K 0,00 -0,01 -0,02 -0,03 -40 -20 2011-08-26 0 20 40 60 80 100 Tj [C] 14 0 20 40 60 80 100 Tj [C] Version 1.0 LCW JNSH.EC Max. Permissible Forward Current Maximal zulassiger Durchlassstrom IF = f (T) F [mA] 30 25 20 15 10 5 : TA 0 0 20 40 60 80 100 Ta [C] Permissible Pulse Handling Capability Zulassige Impulsbelastbarkeit IF = f(tp) Permissible Pulse Handling Capability Zulassige Impulsbelastbarkeit IF = f(tp) Duty cycle D = parameter, TS = 25 C Duty cycle D = parameter, TS = 85 C 2011-08-26 15 Version 1.0 LCW JNSH.EC Package Outline 7) page 24 Mazeichnung 7) Seite 24 Approximate Weight: 30 mg Gewicht: 30 mg 2011-08-26 16 Version 1.0 LCW JNSH.EC Recommended Solder Pad 7) page 24 Empfohlenes Lotpaddesign 7) Seite 24 2011-08-26 Reflow soldering Reflow Loten 17 Version 1.0 LCW JNSH.EC Reflow Soldering Profile Reflow Lotprofil Preconditioning: JEDEC Level 3 acc. to JEDEC S-STD-020-D OHA04525 300 C T 250 Tp 245 C 240 C tP 217 C 200 tL 150 tS 100 50 25 C 0 50 0 100 150 200 250 s 300 t OHA04612 Profil-Charakteristik Profile Feature Symbol Symbol Pb-Free (SnAgCu) Assembly Minimum Ramp-up Rate to Preheat*) 25 C T 150 C Time from TSmin to TSmax 150 C TS 200 C tS 60 ) Ramp-up Rate to Peak* TSmax T TP Recommendation Maximum 2 3 100 120 2 3 Liquidus Temperature TL 217 Time above Liquidus temperature tL 80 TP Time within 5 C of the specified peak temperature TP - 5 K tP 10 Ramp-down Rate* TP T 100 C 18 s K/s C s 480 s 245 260 C 20 30 s 3 6 K/s All temperatures refer to the center of the package, measured on the top of the component * slope calculation T/t: t max. 5 s; fulfillment for the whole T-range 2011-08-26 K/s 100 Time 25 C T TP Peak Temperature Einheit Unit Version 1.0 Method of Taping 7) page Gurtung 7) Seite 24 2011-08-26 LCW JNSH.EC 24 19 Version 1.0 LCW JNSH.EC Tape and Reel Gurtverpackung 8 mm tape with 2000 pcs. on 180 mm reel W1 D0 P0 A N F W E 13.0 0.25 P2 Label P1 Direction of unreeling Direction of unreeling W2 Gurtvorlauf: 400 mm 400 mm Leader: Gurtende: Trailer: 160 mm 160 mm OHAY0324 Tape dimensions in mm (inch) Tape dimensions in mm (inch) W P0 P1 P2 D0 E F 8 +0.3/-0.1 4 0.1 (0.157 0.004) 2 0.05 (0.079 0.002) or 4 0.1 (0.157 0.004) 2 0.05 (0.079 0.002) 1.5 0.1 (0.059 + 0.004) 1.75 0.1 (0.069 0.004) 3.5 0.05 (0.217 0.002) Reel dimensions in mm (inch) Reel dimensions in mm (inch) A W Nmin W1 W2max 180 (7) 8 (0.315) 60 (2.362) 8.4 + 2 (0.331 + 0.079) 14.4 (0.567) 2011-08-26 20 Version 1.0 LCW JNSH.EC Barcode-Product-Label (BPL) Barcode-Produkt-Etikett (BPL) OSRAM Opto BIN1: XX-XX-X-XXX-X LX XXXX Semiconductors RoHS Compliant (6P) BATCH NO: 1234567890 ML Temp ST 2 260 C R (1T) LOT NO: 1234567890 (9D) D/C: 1234 Pack: R18 DEMY 022 B_R999_1880.1642 R (X) PROD NO: 123456789(Q)QTY: 9999 (G) GROUP: XX-XX-X-X OHA04563 Dry Packing Process and Materials Trockenverpackung und Materialien Moisture-sensitive label or print L VE l LE k, If see labe code blan bar ). (RH . RH idity hum 0% e tive C/6 red kag S rela 30 s pac _ < infra IVE of TOR rs tain 90% to ak SIT rs < ns ed (pe UC e). or rs con Hou SEN rs Hou ND and ject ditio cod C, 72 sing Hou e 5 bag E 48 C sub Hou con s UR ICO ces 24 6 dat 40 be time C ory ThiISTSEM r pro < time r 23 time at t will C). l with fact r ent MO . Floo time TO at at r Floo l ths tha tica d ival ure OP Floo 4 if: rea w Floo labe mon iden 5 ced equ el ices g, n e 5a is el belo or 24 pro 6 Lev e dev : ntin el whe cod e , w, e Lev el see e bag Lev l dat mou bak bar ned stur e Lev reflo 10% led stur e time sea for ore> ope e Moi r see stur k, is . sea is has k, Moi stur bef d 033 Moi in Floo RH blan Moi or-p blan in bag Car ing, r TD(if life . If r lf J-S thisvapp. d with 10%bak or Yea _ eks rs < r w, icat met 1 Yea tem d, She at nte uire not > y 1 WeHou DEC Afte Ind 4 uire reflo is bod Mou red req /JE time 168 req : 2b r a) Sto ices idity time is IPC r or time b) ned Floo r Hum ing ce time Dev 2a e r Floo a) ope 3. b) bakren Floo 1 l dat Floo If 2 refe time el 4. 2a el sea 3 Lev el and e Lev el Bag e e Lev stur e Lev Dat stur e Moi stur Moi stur Moi Moi TI U A C 1. Barcode label N O O S R A M 2. Humidity indicator Barcode label Please check the HIC immidiately after bag opening. Discard if circles overrun. Avoid metal contact. Do not eat. Comparator check dot WET If wet, examine units, if necessary bake units 15% If wet, examine units, if necessary bake units 10% 5% If wet, parts still adequately dry. change desiccant Humidity Indicator MIL-I-8835 AM Desiccant OSR OHA00539 Note: Moisture-sensitive product is packed in a dry bag containing desiccant and a humidity card. Regarding dry pack you will find further information in the internet and in the Short Form Catalog in chapter "Tape and Reel" under the topic "Dry Pack". Here you will also find the normative references like JEDEC. Anm.: Feuchteempfindliche Produkte sind verpackt in einem Trockenbeutel zusammen mit einem Trockenmittel und einer Feuchteindikatorkarte. Bezuglich Trockenverpackung finden Sie weitere Hinweise im Internet und in unserem Short Form Catalog im Kapitel "Gurtung und Verpackung" unter dem Punkt "Trockenverpackung". Hier sind Normenbezuge, unter anderem ein Auszug der JEDEC-Norm, enthalten. 2011-08-26 21 Version 1.0 LCW JNSH.EC Transportation Packing and Materials Kartonverpackung und Materialien Barcode label MY DE 8 Q- 1 R1 lti LS TO Y T6 PL 76 1+ Mu POU GR 44 D/C ) (9D 4 20 23 Y: QT H1 TC BA 3G ) : 12 (6P 00 : 01 998 021 210 O Se SR mi AM co nd O uc pt to o H rs NO : ). 5 14 2 110 0 (X) PR OD NO : (1T ) LO T NO see labe (G) l k, N O TI U A C (Q) L VE LE code (RH blan If y bar . idit RH hum 60% e tive d C/ kag rela are 30 E S s _ < infr pac OR of tainITIV 90% to ak urs CT < e). or urs ted (pe ons con NS Ho g urs SE DU Ho and jec diti cod C, 72 sin Ho urs e 5 bag E ON 48 C sub e Ho con s UR ces 24 6 dat e MIC 40 be tim C e ThiISTSE pro < tory tim . or t with 23 tim e at t will C) or fac MO . Flo al len tim TO s at or at Flo d or iva ure el nth s tha OP ntic Flo 4 if: rea Flo , lab ow mo ice equ ide 5 ced el e 5a is el ingen bel or 24 pro 6 Lev e dev, : el cod e , unt wh Lev el re ow see bag Lev l dat re mo bak e bar ned Lev refl istu 10% re led tim sea for istu ore> re ope e Mo see 3 istu is or . sea is has Mo nk, bef istu nk, Flo , rd -03 Mo RH bla in Mo or-p bla bag ingCa r TD life (if If with t. r lf vapp. 10%baktor J-S this Yea , _ eks < r ed ica med, C 1 urs Yea tem She ow at uire not > y 1 WeHo unt DE Afte Ind 1. e 4 uire refl red req 2. bod Mo e ity is /JE tim s 168 req : e 2b a) Sto tim or mid is IPC tim e vice or b) or ned Flo Hu tim ing ce or De e 2a Flo a) ope or 3. b) bakren Flo e 1 l dat Flo If 2 el refe tim 2a 4. el sea 3 Lev el and Lev el re Bag te Lev re Lev istu Da re istu re Mo istu Mo istu Mo Mo P: Muster ED Bin Bin 1: Bin 2: P-1 3: Q-1 -20 ML -20 2 Tem 2a 220 3 240 p ST Ad 260 C R C R0 diti R ona C RT PA 77 l TE CK VA XT R: Barcode label MY DE T6 PL 76 8 1 R1 lti LS TO Y 1+ QP- Mu 8 : 01 99 D/C ) O SR AM 21 00 (9D 00 21 : 4 20 23 QT O H1 (Q) TC 3G BA ) : 12 5 (X) PR OD NO : (1T ) 11 00 LO T 14 2 NO (6P Y: Se SR m A ico M nd O uc pt to o H rs NO 44 (G) GR OU P: Muster ED Bin Bin 1: Bin 2: P-1 3: Q-1 -20 ML -20 2 Te 2a 220 mp 3 240 ST Ad 260 C R C R0 diti R ona C RT PA 77 l TE CK VA XT R: in Packing Sealing label OHA02044 Dimensions of transportation box in mm (inch) Width / Breite Length / Lange Height / Hohe 200 5 (7,874 0,196) 195 5 (7,677 0,1968) 30 5 (1,181 0,196) Safety Advice Sicherheits Hinweise The evaluation of eye safety occurs according to the standard IEC 62471:2006 ("photobiological safety of lamps and lamp systems"). Within the risk grouping system of this CIE standard, the LED specified in this data sheet fall into the class Low risk (exposure time 100s). Under real circumstances (for exposure time, eye pupils, observation distance), it is assumed that no endangerment to the eye exists from these devices. As a matter of principle, however, it should be mentioned that intense light sources have a high secondary exposure potential due to their blinding effect. As is also true when viewing other bright light sources (e.g. headlights), temporary reduction in visual acuity and afterimages can occur, leading to irritation, annoyance, visual impairment, and even accidents, depending on the situation. Die Bewertung der Augensicherheit erfolgt nach dem Standard IEC 62471:2006 ("photobiological safety of lamps and lamp systems"). Im Risikogruppensystem dieser CIE- Norm erfullen die in diesem Datenblatt angegebenen LEDs folgende Gruppenanforderung - Low risk (Expositionsdauer 100s). Unter realen Umstanden (fur Expositionsdauer, Augenpupille, Betrachtungsabstand) geht damit von diesen Bauelementen keinerlei Augengefahrdung aus. Grundsatzlich sollte jedoch erwahnt werden, dass intensive Lichtquellen durch ihre Blendwirkung ein hohes sekundares Gefahrenpotenzial besitzen. Nach einem Blick in eine helle Lichtquelle (z.B. Autoscheinwerfer), kann ein temporar eingeschranktes Sehvermogen oder auch Nachbilder zu Irritationen, Belastigungen, Beeintrachtigungen oder sogar Unfallen fuhren. 2011-08-26 22 Version 1.0 LCW JNSH.EC Disclaimer Disclaimer Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components* may only be used in life-support devices** or systems with the express written approval of OSRAM OS. Bitte beachten! Lieferbedingungen und Anderungen im Design vorbehalten. Aufgrund technischer Anforderungen konnen die Bauteile Gefahrstoffe enthalten. Fur weitere Informationen zu gewunschten Bauteilen, wenden Sie sich bitte an unseren Vertrieb.Falls Sie diese Datenblatt ausgedruckt oder heruntergeladen haben, finden Sie die aktuellste Version im Internet. Verpackung Benutzen Sie bitte die Ihnen bekannten Recyclingwege. Wenn diese nicht bekannt sein sollten, wenden Sie sich bitte an das nachstgelegene Vertriebsburo. Wir nehmen das Verpackungsmaterial zuruck, falls dies vereinbart wurde und das Material sortiert ist. Sie tragen die Transportkosten. Fur Verpackungsmaterial, das unsortiert an uns zuruckgeschickt wird oder das wir nicht annehmen mussen, stellen wir Ihnen die anfallenden Kosten in Rechnung. Bauteile, die in lebenserhaltenden Apparaten und Systemen eingesetzt werden, mussen fur diese Zwecke ausdrucklich zugelassen sein! Kritische Bauteile* durfen in lebenserhaltenden Apparaten und Systemen nur dann eingesetzt werden, wenn ein schriftliches Einverstandnis von OSRAM OS vorliegt. *) A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. **) Life support devices or systems are intended(a) to be implanted in the human body,or(b) to support and/or maintain and sustain human life.If they fail, it is reasonable to assume that the health and the life of the user may be endangered. 2011-08-26 *) Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden Apparaten oder Systemen eingesetzt wird und dessen Defekt voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden Apparates oder Systems fuhren wird oder die Scherheit oder Effektivitat dieses Apparates oder Systems beeintrachtigt. **) Lebenserhaltende Apparate oder Systeme sind fur (a) die Implantierung in den menschlichen Korper oder (b) fur die Lebenserhaltung bestimmt. Falls Sie versagen, kann davon ausgegangen werden, dass die Gesundheit und das Leben des Patienten in Gefahr ist. 23 Version 1.0 LCW JNSH.EC Glossary Glossar 1) 1) Brightness: Brightness groups are tested at a current pulse duration of 25 ms and a tolerance of 11%. 2) Stromeinpragedauer von 25 ms Genauigkeit von 11% ermittelt. 2) Reverse Voltage: Driving the LED in reverse direction is suitable for short term application. 3) Helligkeit: Helligkeitswerte werden mit einer und einer Sperrspannung: Die LED kann kurzzeitig in Sperrichtung betrieben werden. Forward Voltage: Forward voltages are tested at a current pulse duration of 1 ms and a tolerance of 0.1 V. 3) 4) Thermal Resistance: RthJA results from mounting on PC board FR 4 (pad size 16mm2 per pad) 4) Warmewiderstand: RthJA 5) Typical Values: Due to the special conditions of 5) Typische Werte: Wegen Chromaticity coordinate groups: Chromaticity coordinate groups are tested at a current pulse duration of 25 ms and a tolerance of 0.01. 6) Farbortgruppen: Farbortgruppen werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 0,01 ermittelt 7) 7) Matoleranz: Mae angegeben: mm (inch). mit einer Stromeinpragedauer von 1 ms und einer Genauigkeit von 0,1 V ermittelt. the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. 6) Tolerance of Measure: Dimensions are specified as follows: mm (inch). 2011-08-26 Durchlassspannung: Spannungswerte werden 24 ergibt sich bei Montage auf PC-Board FR 4 (Padgroe 16mm2 je pad) der besonderen Prozessbedingungen bei der Herstellung von LED konnen typische oder abgeleitete technische Parameter nur aufgrund statistischer Werte wiedergegeben werden. Diese stimmen nicht notwendigerweise mit den Werten jedes einzelnen Produktes uberein, dessen Werte sich von typischen und abgeleiteten Werten oder typischen Kennlinien unterscheiden konnen. Falls erforderlich, z.B. aufgrund technischer Verbesserungen, werden diese typischen Werte ohne weitere Ankundigung geandert. werden wie folgt Version 1.0 LCW JNSH.EC Published by OSRAM Opto Semiconductors GmbH Leibnizstrae 4, D-93055 Regensburg www.osram-os.com (c) All Rights Reserved. 2011-08-26 25