D-Sub Standard Connectors D-Sub Standard Steckverbinder Ordering Code Bestellschlussel F UL Recognized File No. 168813 W 37 P 0 S G1 - ... Series Prefix / Serienbezeichnung Insulator / Isolierkorper Standard = Thermoplastic / Thermoplast M H Polyester glass filled, zinc plated shell, pin connectors without dimples Polyester, glasfaserverstarkt, Gehauseoberflache verzinkt, Stiftsteckverbinder ohne Kontaktnoppen NO PERFORMANCE CLASSES! / KEINE GUTESTUFEN! Heat resistant, please check availlability hochtemperaturbestandig, Liefermoglichkeiten auf Anfrage Mounting Type / Befestigungsarten Standard / Standard W Float mounted (see page 15) / Schwimmend (siehe Seite15) T Clinch nut 4-40 UNC (see page 59) / Einnietmutter 4-40 UNC (siehe Seite 59) Z Clinch nut M3 (see page 59) / Einnietmutter M3 (siehe Seite 59) TS Clinch nut 4-40 UNC, self locking (see page 59) Einnietmutter 4-40 UNC, selbstsichernd (siehe Seite 59) ZS Clinch nut M3, self locking (see page 59) Einnietmutter M3, selbstsichernd (siehe Seite 59) No. of Contacts / Polzahl 09 15 25 37 50 Shell size / Gehausegroe 1 2 3 4 5 Contact Type / Kontaktart P Pin contacts / Stiftkontakte S Socket contacts / Buchsenkontakte Contact Design (e. g.) / Kontaktvariante (z. B.) 0 1 4 5 14 Solder pot / Lottopf Straight PCB termination / Leiterplattenanschluss, gerade Wire-wrap / Wire Wrap Right angled PCB termination / Leiterplattenanschluss, abgewinkelt Straight PCB termination / Leiterplattenanschluss, gerade For more contacts see page 16 onwards / Weitere Kontakte siehe Seite 16 ff. Machined contacts / Gedrehte Kontakte S Stamped contacts / Gestanzte Kontakte Direction of Right Angled Contacts / Richtung der abgewinkelten Kontakte Standard / Standard R Reverse (Not available with stamped contacts) / Revers (nicht mit gestanzten Kontakten moglich) Performance Classes Available in Accordance with DIN 41652 / Lieferbare Gutestufen nach DIN 41652 Standard insulator / Standardisolierkorper G1 = 500 Contact cycles / Steckzyklen = Performance class 1 / Gutestufe 1 G2 = 200 Contact cycles / Steckzyklen = Performance class 2 / Gutestufe 2 G3 = 50 Contact cycles / Steckzyklen = Performance class 3 / Gutestufe 3 Pin connector with dimples / Stiftsteckverbinder mit Kontaktnoppen FM insulator / FM-Isolierkorper All connectors are in accordance with the standards of performance class 1; no performance class number necessary! (1.3 m (51 microinches) Au over Ni) Alle Steckverbinder erfullen die Anforderungen der Gutestufe 1; Typenbezeichnung ohne Gutestufen! (1,3 m Au uber Ni) Modifications / Modifikationen ALL DIMENSIONS IN MILLIMETERS - VALUES FOR INCHES IN BRACKETS - TECHNICAL DATA SUBJECT TO CHANGE DS 10/2007 Technical Data Technische Daten Mechanical Data Mechanische Daten Mechanical Data Mechanische Daten Mating force per signal contact Steckkraft pro Signalkontakt Unmating force per signal contact Ziehkraft pro Signalkontakt max. torque * max. Anzugsmoment * d3,4 N t0,2 N 40 Ncm (0,295 ft.lb.) 40 Ncm * Not for locking screws * Nicht fur Verriegelungsschrauben Electrical Data Elektrische Daten Electrical Data Elektrische Daten Current rating at room temperature Maximale Stromstarke bei Raumtemperatur Test voltage between 2 contacts / shell and contact Prufspannung zwischen 2 Kontakten bzw. Kontakt und Gehause Meets transition resistance requirements per contact pair in line with DIN 41652: Erfullt Ubergangswiderstand pro Kontaktpaar nach DIN 41652 fur: - Straight contacts / gerade Kontakte - Right angled contacts / abgewinkelte Kontakte - Right angled contacts - 50 way / abgewinkelte Kontakte bei 50 Polen Insulation resistance between contacts Isolationswiderstand Kontakt / Kontakt Volume resistivity Spezifischer Durchgangswiderstand Dielectric strength Spezifische Durchschlagsfestigkeit 5A 1200 V / 1 min. d 10 m: d 25 m: d 35 m: t 5000 M: 16 10 : cm 50 kV / mm Materials and Platings Materialien und Oberflachen Materials and Platings Materialien und Oberflachen Shell Gehause Type / Type Insulator Isolierkorper Relative temperature index according to UL 746 B rel. Temperaturindex nach UL 746 B Heat deflection temperature limit according to DIN 53461 HDT/A Formbestandigkeitstemperatur nach DIN 53461 HDT/A Sub temperature limit Untere Grenztemperatur Shell plating (standard) F Polyester, glass filled (UL94V-0), white Polyester, glasfaserverstarkt (UL94V-0), wei Steel Stahl FH Polyester, heat resistant, glass filled (UL94V-0), natural Polyester, hochtemperaturbestandig, glasfaserverstarkt (UL94V-0), natur 125 C (257 F) 150 C (302 F) 130 C (266 F) 200 C (392 F) 255 C (491 F) 210 C (410 F) -55 C (-67 F) -55 C (-67 F) Tin plated over nickel Gehauseoberflache (Standard) verzinnt uber Nickel Shell (standard) Gehause (Standard) Pin connector shell with dimples Stiftsteckverbindergehause mit Kontaktnoppen Shell (K120) Gehause (K120) Shell (K121) Gehause (K121) Contact material Kontaktmaterial 10 FM Polyester, glass filled (UL94V-0), green Polyester, glasfaserverstarkt (UL94V-0), grun -55 C (-67 F) Yellow chromate over zinc plating Not RoHS compliant verzinkt und gelb chromatiert nicht RoHS konform Pin connector shell without dimples Stiftsteckverbindergehause ohne Kontaktnoppen Tin plated over nickel, pin connector shell with dimples verzinnt uber Nickel, Stiftsteckverbindergehause mit Kontaktnoppen Tin plated over nickel, pin connector shell without dimples verzinnt uber Nickel, Stiftsteckverbindergehause ohne Kontaktnoppen Copper alloy Kupfer-Legierung DS 10/2007 TECHNISCHE ANDERUNGEN VORBEHALTEN - MAE IN MILLIMETER (INCHES IN KLAMMERN) Technical Data Technische Daten Modifications Modifikationen All FCT D-Sub connectors (including crimp versions etc.) are available in many different combinations of materials and platings. For example, shells can be supplied in a non - magnetic version made of brass, which can be electroless nickel, or gold plated for use in aerospace technology. Alle FCT D-Sub Steckverbinder (auch Crimp Versionen, usw.) sind in vielen verschiedenen Material- und Oberflachenkombinationen erhaltlich. So z. B. Gehause in nichtmagnetischer Ausfuhrung aus Messing bzw. chemisch vernickelte oder vergoldete Gehause fur Luft- und Raumfahrtanwendungen. Contact Arrangements Polbilder Face view of socket connector Blick auf Steckseite Buchsensteckverbinder Shell Size Gehausegroe Number of Contacts Polzahl 1 9 2 15 3 25 4 37 5 50 ALL DIMENSIONS IN MILLIMETERS - VALUES FOR INCHES IN BRACKETS - TECHNICAL DATA SUBJECT TO CHANGE Face view of pin connector Blick auf Steckseite Stiftsteckverbinder Pin Connector, Connecting Side Stiftsteckverbinder, Ansicht steckseitig DS 10/2007 11 Shell Dimensions Gehauseabmessungen Pin Connector Shell Stiftsteckverbindergehause Shell Size Gehausegroe No. of Contacts Polzahl 1 9 2 15 3 25 4 37 5 50 A B C D E F G 0,4 +0,2 0,15 +0,2 0,4 0,3 0,3 (0.016) (+0.008) (0.006) (+0.008) (0.016) ( 0.012) (0.012) 30,8 16,9 25,0 8,2 12,5 10,8 19,3 (1.213) (0.665) (0.984) (0.323) (0.492) (0.425) (0.760) 39,1 25,2 33,3 8,2 12,5 10,8 27,5 (1.539) (0.992) (1.311) (0.323) (0.492) (0.425) (1.083) 53,0 38,9 47,04 8,2 12,5 10,8 41,3 (2.087) (1.531) (1.852) (0.323) (0.492) (0.425) (1.626) 69,3 55,3 63,5 8,2 12,5 10,8 57,7 (2.728) (2.177) (2.500) (0.323) (0.492) (0.425) (2.272) 66,9 52,8 61,1 11,0 15,4 13,7 55,3 (2.634) (2.079) (2.406) (0.433) (0.606) (0.539) (2.177) Socket Connector Shell Buchsensteckverbindergehause 0.457 11.6 C 0.248 -0,25 6.3 -0,25 E D B G F 0.122 0.004 3.1 0.1 A 10 +0.2 0.031 +0.2 0.8 12 Shell Size Gehausegroe No. of Contacts Polzahl 1 9 2 15 3 25 4 37 5 50 A B C 0,4 - 0,2 0,15 (0.016) (- 0.008) (0.006) 30,8 16,4 25,0 (1.213) (0.646) (0.984) 39,1 24,7 33,3 (1.539) (0.972) (1.311) 53,0 38,5 47,04 (2.087) (1.516) (1.852) 69,3 54,9 63,5 (2.728) (2.161) (2.500) 66,9 52,5 61,1 (2.634) (2.067) (2.406) DS 10/2007 D -0,2 (-0.008) 8,0 (0.315) 8,0 (0.315) 8,0 (0.315) 8,0 (0.315) 10,8 (0.425) E F G 0,4 0,3 0,3 (0.016) (0.012) (0.012) 12,5 10,8 19,3 (0.492) (0.425) (0.760) 12,5 10,8 27,5 (0.492) (0.425) (1.083) 12,5 10,8 41,3 (0.492) (0.425) (1.626) 12,5 10,8 57,7 (0.492) (0.425) (2.272) 15,4 13,7 55,3 (0.606) (0.539) (2.177) TECHNISCHE ANDERUNGEN VORBEHALTEN - MAE IN MILLIMETER (INCHES IN KLAMMERN) Panel Cut-Out Montageausschnitt Front Mounted Frontseitig montiert Standard, Front Mounted Standard, frontseitig montiert Float, Front Mounted (Series FW) Schwimmend, frontseitig montiert (Baureihe FW) 0.008 0.2 Shell Size Gehausegroe 1 2 3 4 5 A B 0,2 (0.008) 0,1 (0.004) 22,2 (0.874) 25,0 (0.984) 30,5 (1.201) 33,3 (1.311) 44,3 (1.744) 47,0 (1.850) 60,7 (2.390) 63,5 (2.500) 58,3 (2.295) 61,1 (2.406) C 0,2 (0.008) 12,3 (0.484) 12,3 (0.484) 12,3 (0.484) 12,3 (0.484) 15,1 (0.594) Shell Size Gehausegroe 1-5 1-5 Mounting Befestigung Standard / Standard Float mounted / schwimmend 0.161 4.1 0.087 2.2 0.016 0.4 0.016 0.4 0.114 0.004 2.9 0.10 OD 0,05 (0.002) 3,1 (0.122) 2,2 (0.087) Rear Mounted Ruckseitig montiert Float, Rear Mounted (Series FW) Schwimmend, ruckseitig montiert (Baureihe FW) 0.008 0.2 Shell Size Gehausegroe 1 2 3 4 5 A B 0,2 (0.008) 0,1 (0.004) 20,5 (0.807) 25,0 (0.984) 28,8 (1.134) 33,3 (1.311) 42,5 (1.673) 47,0 (1.850) 59,1 (2.327) 63,5 (2.500) 56,3 (2.217) 61,1 (2.406) C 0,2 (0.008) 11,4 (0.449) 11,4 (0.449) 11,4 (0.449) 11,4 (0.449) 14,1 (0.555) ALL DIMENSIONS IN MILLIMETERS - VALUES FOR INCHES IN BRACKETS - TECHNICAL DATA SUBJECT TO CHANGE Shell Size Gehausegroe 1-5 1-5 Mounting Befestigung Standard / Standard float mounted / schwimmend DS 10/2007 0.161 4.1 0.087 2.2 0.016 0.4 0.114 0.004 2.9 0.10 0.016 0.4 Standard, Rear Mounted Standard, ruckseitig montiert OD 0,05 (0.002) 3,1 (0.122) 2,2 (0.087) 13 Mounting and Mating Instructions Montage- und Steckhinweise Pulling Range Fangbereich Dimension for Safe Contact Area Ma fur sicheren Kontaktbereich Tilt Angle for Connector Mating Schraglage zur Steckrichtung 14 DS 10/2007 TECHNISCHE ANDERUNGEN VORBEHALTEN - MAE IN MILLIMETER (INCHES IN KLAMMERN) Mounting Combinations Befestigungsmoglichkeiten Figure 1 Abbildung 1 Figure 2 Abbildung 2 Figure 3 Abbildung 3 Figure 4 Abbildung 4 Figure 5 Abbildung 5 Figure 6 Abbildung 6 Combinations Kombinationsmoglichkeiten Figure Abbildung 1 2 Pin Stift standard standard 3 standard 4 standard 5 6 Float mounted schwimmend Float mounted schwimmend ALL DIMENSIONS IN MILLIMETERS - VALUES FOR INCHES IN BRACKETS - TECHNICAL DATA SUBJECT TO CHANGE Socket Buchse standard standard Float mounted schwimmend Float mounted schwimmend Float mounted schwimmend Float mounted schwimmend DS 10/2007 15 Straight Signal Contacts Gerade Signalkontakte Solder Pot Termination AWG 20 Lottopfanschluss AWG 20 Straight PCB Termination O 0.6 mm (O 0.024") Gerader Leiterplattenanschluss O 0,6 mm Straight PCB Termination O 0.76 mm (O 0.030") Gerader Leiterplattenanschluss O 0,76 mm Wire-Wrap Termination 0.6 mm ( 0.024") Wire Wrap Anschluss 0,6 mm Straight PCB Termination O 1.0 mm (O 0.039" ) Gerader Leiterplattenanschluss O 1,0 mm No Compliant Pressfit Termination 0.8 mm ( 0.031") Massiver Einpressanschluss 0,8 mm Stamped Contacts with Solder Pot Termination AWG 20 Gestanzter Kontakt mit Lottopfanschluss AWG 20 Line Contact Termination Kontaktlamellenanschluss For PCB thickness 1.6 mm (0.063") Fur Leiterplattenstarke 1,6 mm 16 DS 10/2007 TECHNISCHE ANDERUNGEN VORBEHALTEN - MAE IN MILLIMETER (INCHES IN KLAMMERN) Right Angled Signal Contacts (PCB Termination) Abgewinkelte Signalkontakte (Leiterplattenanschluss) Spacing 2.54 mm (0.100"), O 0.6 mm (O 0.024") Reihenabstand 2,54 mm, O 0,6 mm Pin contact on request Stiftkontakt auf Anfrage ALL DIMENSIONS IN MILLIMETERS - VALUES FOR INCHES IN BRACKETS - TECHNICAL DATA SUBJECT TO CHANGE DS 10/2007 17 Right Angled Signal Contacts (PCB Termination) Abgewinkelte Signalkontakte (Leiterplattenanschluss) Spacing 2.54 mm (0.100"), O 0.76 mm (O 0.030" ) Reihenabstand 2,54 mm, O 0,76 mm Spacing 2.54 mm (0.100"), Stamped Contact Reihenabstand 2,54 mm, gestanzter Kontakt Only in combination with plastic brackets. Nur in Verbindung mit Kunststoffbefestigungswinkel. Pin contact on request Stiftkontakt auf Anfrage Spacing 2.84 mm (0.112"), O 0.6 mm (O 0.024") Reihenabstand 2,84 mm, O 0,6 mm Spacing 2.84 mm (0.112"), O 0.6 mm (O 0.024") Reihenabstand 2,84 mm, O 0,6 mm Spacing 2.54 mm (0.100"), O 0.6 mm (O 0.024"), Short Plug Reihenabstand 2,54 mm, O 0,6 mm, verkurzte Steckseite Spacing 2.84 mm (0.112"), O 0.76 mm (O 0.030") Reihenabstand 2,84 mm, O 0,76 mm Available as a pin contact only Nur als Stiftkontakt verfugbar 18 DS 10/2007 TECHNISCHE ANDERUNGEN VORBEHALTEN - MAE IN MILLIMETER (INCHES IN KLAMMERN) Direction of Right Angled Signal Contacts Richtung der abgewinkelten Signalkontakte Standard Standard Ordering Example Bestellbeispiel Pin connector, 25 contacts, right angled PCB termination, spacing 2.54 mm (0.100"), O 0.6 mm (O 0.024"), performance class 1: Stiftsteckverbinder, 25-polig, abgewinkelter Leiterplattenanschluss, 2,54 mm Reihenabstand, O 0,6 mm, Gutestufe 1: F25P5G1 F25P5G1 Reverse Revers Ordering Example Bestellbeispiel Pin connector, 25 contacts, right angled PCB termination (reversed), spacing 2.54 mm (0.100"), O 0.6 mm (O 0.024"), performance class 1: Stiftsteckverbinder, 25-polig, abgewinkelter Leiterplattenanschluss (entgegengesetzt), Reihenabstand 2,54 mm, O 0,6 mm, Gutestufe 1. F25P5RG1 F25P5RG1 ALL DIMENSIONS IN MILLIMETERS - VALUES FOR INCHES IN BRACKETS - TECHNICAL DATA SUBJECT TO CHANGE DS 10/2007 19 PCB Hole Patterns According to DIN 41652 Leiterplattenlochbilder nach DIN 41652 9 Contacts 9-polig 15 Contacts 15-polig 16.65 0.656 12.50 0.492 8.23 0.324 5.49 0.216 2.74 0.108 4.11 0.162 1.37 0.054 0 0 0 2.74 0.108 5.49 0.216 1 0.039 1 0.039 0 1.37 4.11 6.86 9.60 2.54 0.100 2.84 0.112 0.054 0.162 0.270 0.378 2.54 0.100 2.84 0.112 25 Contacts 25-polig 37 Contacts 37-polig 31.75 1.250 23.52 0.926 15.19 12.42 9.68 6.91 4.14 1.40 0.598 0.489 0.381 0.272 0.163 0.055 0 0.924 0.815 0.707 0.598 0.489 0.381 0.272 0.163 0.055 0 2.77 0.109 5.54 0.218 8.28 0.326 11.05 0.435 13.82 0.544 16.56 0.652 19.33 0.761 22.10 0.870 24.84 0.978 0 1 0.039 1 0.039 0 2.77 0.109 5.54 0.218 8.28 0.326 11.05 0.435 13.82 0.544 16.56 0.652 23.47 20.70 17.96 15.19 12.42 9.68 6.91 4.14 1.40 2.54 0.100 2.84 0.112 2.54 0.100 2.84 0.112 50 Contacts 50-polig 30.55 1.203 20.70 17.96 15.19 12.42 9.68 6.91 4.14 1.40 0.815 0.707 0.598 0.489 0.381 0.272 0.163 0.055 0 1 0.039 0 2.77 0.109 5.54 0.218 8.28 0.326 11.05 0.435 13.82 0.544 16.56 0.652 19.33 0.761 22.10 0.870 2.54 0.100 2.84 0.112 20 Row Spacing Reihenabstand Right Angled Contacts Straight Contacts Abgewinkelte Kontakte Gerade Kontakte 2.54 mm (0.100"), except for contact design 2,84 mm nos. 12, 41 and 69, here: 2.84 mm (0.112") (0.112) 2,54 mm, auer bei den Kontaktvarianten 12 ,41 und 69, dort: 2,84 mm For the diameter of assembly drillings, please see assembly parts page 62 onwards. Fur die Durchmesser der Montagebohrungen siehe Anbauteile ab Seite 62. 2.54 0.100 2.84 0.112 DS 10/2007 TECHNISCHE ANDERUNGEN VORBEHALTEN - MAE IN MILLIMETER (INCHES IN KLAMMERN)