Transient Voltage Suppressor Features: * * * * * * Optimized for LAN Protection Applications Low Profile Package With Built-In Strain Relief For Surface Mounted Applications Low Incremental Surge Resistance, Excellent Clamping Capability 400W Peak Pulse Power Capability with a 10/1,000s Wave Form, Repetition Rate (duty cycle): 0.01% (300W above 78V) Very Fast Response Time High Temperature Soldering Guaranteed : 260C/10 seconds at Terminals Mechanical Data * * * * Case : JEDEC DO-214AC molded plastic over passivated chip Terminals : solder plated, solderable per MIL-STD-750, method 2026 Polarity : forint-directional types the colour band denotes the cathode, which is positive with respect to the anode under normal TVS operation Mounting position: any Weight : 0.002oz, 0.064g Devices for Bidirectional Applications For Bi-directional devices, use suffix C or CA (e.g. SMAJ10C, SMAJ10CA). Electrical characteristics apply in both directions. Maximum Ratings and Thermal Characteristics (TA=25C unless otherwise noted) Characteristic Symbol Value Unit Peak power dissipation with a 10/1,000s waveform (Note 1,2, Fig.1) PPPM Min. 400 W Peak pulse current with a 10/1,000s waveform (Note 1) IPPM See Next Table A Typical thermal resistance, junction to ambient (Note 3) RJA 120 C/W Peak forward surge current, 8.3ms single half sine-wave uni-directional only (Note 2) IFSM 40 A Typical thermal resistance, junction to ambient (Note 3) RJL 30 C/W TJ, TSTG -55 to +150 C Operating junction and storage temperature range Note: (1) Non-repetitive current pules, per Fig. 3 and derate above TA=25 per Fig. 2. Rating is 300W above 78V. (2) Mounted on 0.2 x 0.2 (5mm x 5mm) copper pads to each terminal. (3) Mounted on minimum recommended pad layout www.element14.com www.farnell.com www.newark.com Page <1> 25/02/13 V1.0 Transient Voltage Suppressor Electrical Characteristics (TA = 25C) Part Number Device Marking code UNI BI SMAJ6.5A-13-F AAH SMAJ6.5CA-13-F Dynamic V VWM @IT IRM IPPM VWM VC IPPM Min. Max. mA V uA A V AWH 7.22 8.82 10 6.5 500 32.5 12.3 AAK AWK 7.22 7.98 10 6.5 500 35.7 11.2 SMAJ10A-13-F AAX AWX 11.1 12.3 1 10 5 23.5 17 SMAJ11CA-13-F AAZ AWZ 12.2 13.5 1 11 5 22 18.2 SMAJ15CA-13-F ABM AXM 16.7 18.5 1 15 5 16.4 24.4 SMAJ16A-13-F ABP AXP 17.8 19.7 1 16 5 15.4 26 SMAJ17A-13-F ABR AXR 18.9 20.9 1 17 5 14.5 27.6 SMAJ20A-13-F ABV AXV 22.2 24.5 1 20 5 12.3 32.4 SMAJ22A-13-F ABX AXX 24.4 26.9 1 22 5 11.3 35.5 SMAJ24CA-13-F ABZ AXZ 26.7 29.5 1 24 5 10.3 38.9 SMAJ33A-13-F ACM AYM 36.7 40.6 1 33 5 5.6 53.3 SMAJ43CA-13-F ACT AYT 47.8 52.8 1 43 5 4.3 69.4 SMAJ60A-13-F ARK AZK 66.7 73.7 1 60 5 3.1 96.8 SMAJ60A-13-F ART AZT 86.7 95.8 1 78 5 2.4 126 SMAJ78CA-13-F ART AZT 86.7 95.8 1 78 5 2.4 126 SMAJ160A-13-F ASP AVP 178 197 1 160 5 1.2 259 www.element14.com www.farnell.com www.newark.com Page <2> 25/02/13 V1.0 Transient Voltage Suppressor www.element14.com www.farnell.com www.newark.com Page <3> 25/02/13 V1.0 Transient Voltage Suppressor Package Outline Dimensions DO-214AC(SMA) Dim. Min. Max. A 4.25 4.65 B 2.4 2.8 C 1.85 2.15 D 4.85 5.35 E 0.2 Typ. F 0.9 G 1.5 0.2 Max. H 1.9 2.3 I 1.35 1.65 Dimensions : Millimetres Soldering Footprint Dimensions : Millimetres Package Information Device Package Shipping SMAJ6.5A-13-F SMAJ6.5CA-13-F SMAJ10A-13-F SMAJ11CA-13-F SMAJ15CA-13-F SMAJ16A-13-F SMAJ17A-13-F SMAJ20A-13-F SMAJ22A-13-F SMAJ24CA-13-F SMAJ33A-13-F SMAJ43CA-13-F SMAJ60A-13-F SMAJ60A-13-F SMAJ78CA-13-F SMAJ160A-13-F DO-214AC(SMA) 5,000 / Tape & Reel www.element14.com www.farnell.com www.newark.com Page <4> 25/02/13 V1.0 Transient Voltage Suppressor Part Number Table Description Part Number SMAJ6.5A-13-F SMAJ6.5CA-13-F SMAJ10A-13-F SMAJ11CA-13-F SMAJ15CA-13-F SMAJ16A-13-F SMAJ17A-13-F Transient Voltage Suppressor SMAJ20A-13-F SMAJ22A-13-F SMAJ24CA-13-F SMAJ33A-13-F SMAJ43CA-13-F SMAJ60A-13-F SMAJ60A-13-F SMAJ78CA-13-F SMAJ160A-13-F Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. (c) Premier Farnell plc 2012. www.element14.com www.farnell.com www.newark.com Page <5> 25/02/13 V1.0