JAN2N2906AUB - Microsemi - searchdatasheet.com

TECHNICAL DATA SHEET

6 Lake Street, Lawrence, MA 01841

1-800-446-1158 / (978) 620-2600 / Fax: ( 978) 689-0803

Website: http: //www.microsemi.com

PNP SMALL SIGNAL SILICON TRANSISTOR

Qualified per MIL-PRF-19500/291

T4-LDS-0059 Rev. 2 (100247) Page 1 of 6

DEVICES LEVELS

2N2906A 2N2907A JAN

2N2906AL 2N2907AL JANTX

2N2906AUA 2N2907AUA JANTXV

2N2906AUB 2N2907AUB JANS

2N2906AUBC * 2N2907AUBC *

* Available to JANS quality level only.

ABSOLUTE MAXIMUM RATI NG S (TC = +25°C unless otherwise noted)

Parameters / Test Conditions Symbol Value Unit

Collector-Emitter Voltage VCEO 60 Vdc

Collector-Base Voltage VCBO 60 Vdc

Emitter-Base Voltage VEBO 5.0 Vdc

Collector Current IC 600 mAdc

Total Power Dissipation @ TA = +25°C PT 0.5 W

Operating & Storage Junction Temperature Range Top, Tstg -65 to +200 °C

Note: Consult 19500/291 for Thermal Performance Curves.

ELECTRICAL CHARACTERISTICS (TA = +25°C, unless otherwise noted)

Parameters / Test Conditions Symbol Min. Max. Unit

OFF CHARACTERTICS

Collector-Emitter Breakdown Voltage

IC = 10mAdc V(BR)CEO 60 Vdc

Collector-Base Cutoff Current

VCB = 60Vdc

VCB = 50Vdc ICBO

10

μAdc

ηAdc

Emitter-Base Cutoff Current

VEB = 4.0Vdc

VEB = 5.0Vdc IEBO

50

10

ηAdc

μAdc

Collector-Emitter Cutoff Current

VCE = 50Vdc ICES 50 ηAdc

TO-18 (TO-206AA)

2N2906A, 2N2907A

4 PIN

2N2906AUA, 2N2907AUA

3 PIN

2N2906AUB, 2N2907AUB

2N2906AUBC, 2N2907AUBC

(UBC = Ceramic Lid Version)

TECHNICAL DATA SHEET

6 Lake Street, Lawrence, MA 01841

1-800-446-1158 / (978) 620-2600 / Fax: ( 978) 689-0803

Website: http: //www.microsemi.com

T4-LDS-0059 Rev. 2 (100247) Page 2 of 6

ELECTRICAL CHARACTERISTICS (TA = +25°C, unless otherwise noted)

Parameters / Test Conditions Symbol Min. Max. Unit

ON CHARACTERISTICS (4)

Forward-Current Transfer Ratio

IC = 0.1mAdc, VCE = 10Vdc 2N2906A, L, UA, UB, UBC

2N2907A, L, UA, UB, UBC 40

75

IC = 1.0mAdc, VCE = 10Vdc 2N2906A, L, UA, UB, UBC

2N2907A, L, UA, UB, UBC 40

100 175

450

IC = 10mAdc, VCE = 10Vdc 2N2906A, L, UA, UB, UBC

2N2907A, L, UA, UB, UBC 40

100

IC = 150mAdc, VCE = 10Vdc 2N2906A, L, UA, UB, UBC

2N2907A, L, UA, UB, UBC 40

100 120

300

IC = 500mAdc, VCE = 10Vdc 2N2906A, L, UA, UB, UBC

2N2907A, L, UA, UB, UBC

hFE

40

50

Collector-Emitter Saturation Voltage

IC = 150mAdc, IB = 15mAdc

IC = 500mAdc, IB = 50mAdc VCE(sat) 0.4

1.6 Vdc

Base-Emitter Saturation Voltage

IC = 150mAdc, IB = 15mAdc

IC = 500mAdc, IB = 50mAdc VBE(sat) 0.6

1.3

2.6

Vdc

DYNAMIC CHARACTERISTICS

Parameters / Test Conditions Symbol Min. Max. Unit

Forward Current Transfer Ratio

IC = 1.0mAdc, VCE = 10Vdc, f = 1.0kHz 2N2906A, L, UA, UB, UBC

2N2907A, L, UA, UB, UBC

hfe 40

100

Magnitude of Small–Signal Forward Current Transfer Ratio

IC = 20mAdc, VCE = 20Vdc, f = 100MHz |hfe| 2.0

Output Capacitance

VCB = 10Vdc, IE = 0, 100kHz ≤ f ≤ 1.0MHz Cobo 8.0 pF

Input Capacitance

VEB = 2.0Vdc, IC = 0, 100kHz ≤ f ≤ 1.0MHz Cibo 30 pF

SWITCHING CHARACTERISTICS

Parameters / Test Conditions Sy mbol Min. Max. Unit

Turn-On Time

VCC = 30Vdc; IC = 150mAdc; IB1 = 50mAdc t

on 45

ηs

Turn-Off Time

VCC = 30Vdc; IC = 150mAdc; IB1 = -IB2 = 50mAdc

toff 300

ηs

(4) Pulse Test: Pulse Width = 300μs, Duty Cycle ≤ 2.0%.

TECHNICAL DATA SHEET

6 Lake Street, Lawrence, MA 01841

1-800-446-1158 / (978) 620-2600 / Fax: ( 978) 689-0803

Website: http: //www.microsemi.com

T4-LDS-0059 Rev. 2 (100247) Page 3 of 6

PACKAGE DIMENSIONS

NOTES: Dimensions

1. Dimensions are in inches. Symbol Inches Millimeters Note

2. Millimeters are given for general information only. Min Max Min Max

3. Beyond r (radius) maximum, TW shall be held for a minimum length CD .178 .195 4.52 4.95

of .011 inch (0.28 mm). CH .170 .210 4.32 5.33

4. Dimension TL measured from ma ximum HD. HD .209 .230 5.31 5.84

5. Body contour optional within zone defined by HD, CD, and Q. LC .100 TP 2.54 TP 6

6. Leads at gauge plane .054 +.001 -.000 inch (1.37 +0.03 -0.00 mm) LD .016 .021 0.41 0.53 7,8

below seating plane shall be within .007 inch (0.18 mm) radius of LL .500 .750 12.70 19.05 7,8,13

true position (TP) at maximum material condition (MMC) relative to LU .016 .019 0.41 0.48 7,8

tab at MMC. L1 .050 1.27 7,8

7. Dimension LU applies between L1 and L2. Dimension LD applies L2 .250 6.35 7,8

between L2 and LL minimum. Diameter is uncontrolled in L1 and P .100 2.54

beyond LL minimum. Q .030 0.76 5

8. All three leads. TL .028 .048 0.71 1.22 3,4

9. The collector shall be internally connected to the case. TW .036 .046 0.91 1.17 3

10. Dimension r (radius) applies to both inside corners of tab. r .010 0.25 10

11. In accordance with ASME Y14.5M, diameters are equivalent to φx α 45° TP 45° TP 6

symbology.

12. Lead 1 = emitter, lead 2 = base, lead 3 = collector.

13. For L suffix devices, dimension LL = 1.5 inches (38.10 mm) min.

and 1.75 inches (44.45 mm) max.

FIGURE 1. Physical dimensions (similar to TO-18)

TECHNICAL DATA SHEET

6 Lake Street, Lawrence, MA 01841

1-800-446-1158 / (978) 620-2600 / Fax: ( 978) 689-0803

Website: http: //www.microsemi.com

T4-LDS-0059 Rev. 2 (100247) Page 4 of 6

NOTES: Dimensions

1. Dimensions are in inches. Symbol Inches Millimeters

Note

2. Millimeters are given for general information only. Min Max Min Max

3. Dimension “CH” controls the overall package thickness. When a BL .215 .225 5.46 5.71

window lid is used, dimension “CH” must increase by a minimum of BL2 .225 5.71

.010 inch (0.254 mm) and a maximum of .040 inch (1.020 mm). BW .145 .155 3.68 3.93

4. The corner shape (square, notch, radius) may vary at the BW2 .155 3.93

manufacturer's option, from that shown on the drawing. CH .061 .075 1.55 1.90 3

5. Dimensions “LW2” minimum and “L3” minimum and the appropriate L3 .003 .007 0.08 0.18 5

castellation length define an unobstructed three-dimensional space LH .029 .042 0.74 1.07

traversing all of the ceramic layers in which a castellation was LL1 .032 .048 0.81 1.22

designed. (Castellations are required on the bottom two layers, LL2 .072 .088 1.83 2.23

optional on the top ceramic layer.) Dimension “LW2” maximum and LS .045 .055 1.14 1.39

“L3” maximum define the maximum width and depth of the LW .022 .028 0.56 0.71

castellation at any point on its surface. Measurement of these LW2 .006 .022 0.15 0.56 5

dimensions may be made prior to solder dipping.

6. The co-planarity deviation of all terminal contact points, as defined

by the device seating plane, shall not exceed .006 inch (0.15mm) for Pin no. 1 2 3 4

solder dipped leadless chip carriers. Transistor Collector Emitter Base N/C

7. In accordance with ASME Y14.5M, diameters are equivalent to φx

symbology.

FIGURE 2. Physical dimensions, surface mount (UA version)

TECHNICAL DATA SHEET

6 Lake Street, Lawrence, MA 01841

1-800-446-1158 / (978) 620-2600 / Fax: ( 978) 689-0803

Website: http: //www.microsemi.com

T4-LDS-0059 Rev. 2 (100247) Page 5 of 6

Dimensions Dimensions

Symbol Inches Millimeters Note Symbol Inches Millimeters

Note

Min Max Min Max Min Max Min Max

BH .046 .056 1.17 1.42 LS1 .036 .040 0.91 1.02

BL .115 .128 2.92 3.25 LS2 .071 .079 1.81 2.01

BW .085 .108 2.16 2.74 LW .016 .024 0.41 0.61

CL .128 3.25

r .008 .203

CW .108 2.74

r1 .012 .305

LL1 .022 .038 0.56 0.96 r2 .022 .559

LL2 .017 .035 0.43 0.89

NOTES:

1. Dimensions are in inches.

2. Millimeters are given for general information only.

3. Pad 1 = Base, Pad 2 = Emitter, Pad 3 = Collector, Pad 4 = Shielding connected to the lid.

4. In accordance with ASME Y14.5M, diameters are equivalent to φx symbology.

FIGURE 3. Physical dimensions, surface mount (UB version)

UB

TECHNICAL DATA SHEET

6 Lake Street, Lawrence, MA 01841

1-800-446-1158 / (978) 620-2600 / Fax: ( 978) 689-0803

Website: http: //www.microsemi.com

T4-LDS-0059 Rev. 2 (100247) Page 6 of 6

Dimensions Dimensions

Symbol Inches Millimeters Note Symbol Inches Millimeters

Note

Min Max Min Max Min Max Min Max

BH .046 .071 1.17 1.80 LS1 .036 .040 0.91 1.02

BL .115 .128 2.92 3.25 LS2 .071 .079 1.81 2.01

BW .085 .108 2.16 2.74 LW .016 .024 0.41 0.61

CL .128 3.25

r .008 .203

CW .108 2.74

r1 .012 .305

LL1 .022 .038 0.56 0.96 r2 .022 .559

LL2 .017 .035 0.43 0.89

NOTES:

1. Dimensions are in inches.

2. Millimeters are given for general information only.

3. Hatched areas on package denote metalized areas.

4. Pad 1 = Base, Pad 2 = Emitter, Pad 3 = Collector, Pad 4 = Connected to the lid braze ring.

5. In accordance with ASME Y14.5M, diameters are equivalent to φx symbology.

FIGURE 4. Physical dimensions, surface mount (UBC version, ceramic lid)

UBC

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Microsemi:

JAN2N2906AUB Jantx2N2907AUA 2N2906AUA JANTXV2N2906AL Jantx2N2906A Jantx2N2907AL

Jan2N2906AUA Jan2N2907AUA JANS2N2907A 2N2907AUB JANS2N2906AL 2N2906AL JANTXV2N2906AUB

Jantxv2N2907A JANS2N2906AUA JANS2N2906A Jantxv2N2906A 2N2907A JAN2N2906AL Jantx2N2906AUA

JANS2N2906AUB 2N2907AL JANS2N2907AUB 2N2906AUB 2N2906A JANTX2N2906AL JANS2N2907AUA

2N2907AUA JANTX2N2906AUB Jantxv2N2907AUB Jan2N2907A Jantxv2N2907AUA Jantxv2N2906AUA

JANS2N2907AL Jan2N2906A Jantxv2N2907AL Jantx2N2907A