MMPQ2222A Preferred Device Quad General Purpose Transistor NPN Silicon http://onsemi.com MAXIMUM RATINGS Rating 1 16 15 Symbol Value Unit 2 3 14 VCEO 40 Vdc 4 13 5 12 VCB 75 Vdc 6 11 7 10 8 9 Collector -Emitter Voltage Collector -Base Voltage Emitter -Base Voltage VEB Collector Current - Continuous IC 5.0 Vdc 500 mAdc Four Transistors Equal Power Total Power Dissipation @ TA = 25C Derate above 25C PD Total Power Dissipation @ TC = 25C Derate above 25C PD Operating and Storage Junction Temperature Range TJ, Tstg Watts 1.0 8.0 mW/C Watts 2.4 19.2 mW/C -55 to +150 C SO-16 CASE 751B STYLE 4 Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. MARKING DIAGRAM MMPQ2222A AWLYWW MMPQ2222A ic Device Code A sembly Location WL Lot Y WW Week = Specif= As= Wafer = Year = Work ORDERING INFORMATION Device Package Shipping MMPQ2222A SO-16 48 Units/Rail Preferred devices are recommended choices for future use and best overall value. (c) Semiconductor Components Industries, LLC, 2006 August, 2006 - Rev. 2 1 Publication Order Number: MMPQ2222A/D MMPQ2222A ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted) Symbol Min Typ Max Unit Collector -Emitter Breakdown Voltage (Note 1) (IC = 10 mAdc, IB = 0) V(BR)CEO 40 - - Vdc Collector -Base Breakdown Voltage (IC = 10 mAdc, IE = 0) V(BR)CBO 75 - - Vdc Emitter -Base Breakdown Voltage (IB = 10 mAdc, IC = 0) V(BR)EBO 5.0 - - - - - Vdc - - - - 50 10 - - 100 35 50 75 100 40 50 - - - - - - - - - 300 - - - - - - 0.3 1.0 - - - - 1.2 2.0 fT 200 350 - MHz Output Capacitance (VCB = 10 Vdc, IE = 0, f = 1.0 MHz) Cob - 4.5 - pF Input Capacitance (VEB = 0.5 Vdc, IC = 0, f = 1.0 MHz) Cib - 17 - pF Turn-On Time (VCC = 30 Vdc, VBE(off) = -0.5 Vdc, IC = 150 mAdc, IB1 = 15 mAdc) ton - 25 - ns Turn-Off Time (VCC = 30 Vdc, IC = 150 mAdc, IB1 = IB2 = 15 mAdc) toff - 250 - ns Characteristic OFF CHARACTERISTICS Collector Cutoff Current (VCB = 50 Vdc, IE = 0) (VCB = 60 Vdc, IE = 0) ICBO Emitter Cutoff Current (VEB = 3.0 Vdc, IC = 0) IEBO nAdc nAdc ON CHARACTERISTICS DC Current Gain (Note 1) (IC = 100 mA, VCE = 10 V) (IC = 1.0 mA, VCE = 10 V) (IC = 10 mA, VCE = 10 V) (IC = 150 mA, VCE = 10 V) (IC = 500 mA, VCE = 10 V) (IC = 150 mA, VCE = 1.0 V) hFE Collector -Emitter Saturation Voltage (Note 1) (IC = 150 mAdc, IB = 15 mAdc) (IC = 500 mAdc, IB = 50 mAdc) VCE(sat) Base -Emitter Saturation Voltage (Note 1) (IC = 150 mAdc, IB = 15 mAdc) (IC = 500 mAdc, IB = 50 mAdc) VBE(sat) - Vdc Vdc DYNAMIC CHARACTERISTICS Current -Gain - Bandwidth Product (Note 1) (IC = 20 mAdc, VCE = 20 Vdc, f = 100 MHz) SWITCHING CHARACTERISTICS 1. Pulse Test: Pulse Width 300 ms, Duty Cycle 2%. http://onsemi.com 2 MMPQ2222A SWITCHING TIME EQUIVALENT TEST CIRCUITS +30 V +30 V 1.0 to 100 s, DUTY CYCLE 2.0% +16 V 0 -2 V 200 1.0 to 100 s, DUTY CYCLE 2.0% +16 V 0 1 k < 2 ns 1k -14 V CS* < 10 pF 200 < 20 ns CS* < 10 pF 1N914 -4 V Scope rise time < 4 ns *Total shunt capacitance of test jig, connectors, and oscilloscope. Figure 1. Turn-On Time Figure 2. Turn-Off Time hFE , DC CURRENT GAIN 1000 700 500 TJ = 125C 300 200 25C 100 70 50 -55C 30 VCE = 1.0 V VCE = 10 V 20 10 0.1 0.2 0.3 0.5 0.7 1.0 2.0 3.0 5.0 7.0 10 20 IC, COLLECTOR CURRENT (mA) 30 50 70 100 200 300 500 700 1.0 k VCE , COLLECTOR-EMITTER VOLTAGE (VOLTS) Figure 3. DC Current Gain 1.0 TJ = 25C 0.8 0.6 IC = 1.0 mA 10 mA 150 mA 500 mA 0.4 0.2 0 0.005 0.01 0.02 0.03 0.05 0.1 0.2 0.3 0.5 1.0 IB, BASE CURRENT (mA) 2.0 Figure 4. Collector Saturation Region http://onsemi.com 3 3.0 5.0 10 20 30 50 MMPQ2222A 200 500 IC/IB = 10 TJ = 25C tr @ VCC = 30 V td @ VEB(off) = 2.0 V td @ VEB(off) = 0 30 20 10 7.0 5.0 200 ts = ts - 1/8 tf 100 70 50 tf 30 20 10 7.0 5.0 3.0 2.0 5.0 7.0 10 200 300 20 30 50 70 100 IC, COLLECTOR CURRENT (mA) 500 5.0 7.0 10 20 30 50 70 100 200 IC, COLLECTOR CURRENT (mA) Figure 5. Turn -On Time IC = 1.0 mA, RS = 150 500 A, RS = 200 100 A, RS = 2.0 k 50 A, RS = 4.0 k 8.0 6.0 f = 1.0 kHz 8.0 NF, NOISE FIGURE (dB) NF, NOISE FIGURE (dB) 500 10 RS = OPTIMUM RS = SOURCE RS = RESISTANCE 4.0 IC = 50 A 100 A 500 A 1.0 mA 6.0 4.0 2.0 2.0 0 0.01 0.02 0.05 0.1 0.2 0.5 1.0 2.0 5.0 10 100 200 500 1.0 k 2.0 k 5.0 k 10 k 20 k 50 k 100 k RS, SOURCE RESISTANCE (OHMS) Figure 7. Frequency Effects Figure 8. Source Resistance Effects Ceb 10 7.0 5.0 Ccb 3.0 0.5 0.7 1.0 2.0 3.0 5.0 7.0 10 REVERSE VOLTAGE (VOLTS) 20 30 50 f T, CURRENT-GAIN BANDWIDTH PRODUCT (MHz) f, FREQUENCY (kHz) 20 0.2 0.3 0 50 50 100 20 30 CAPACITANCE (pF) 300 Figure 6. Turn -Off Time 10 2.0 0.1 VCC = 30 V IC/IB = 10 IB1 = IB2 TJ = 25C 300 t, TIME (ns) t, TIME (ns) 100 70 50 500 VCE = 20 V TJ = 25C 300 200 100 70 50 1.0 Figure 9. Capacitances 2.0 3.0 5.0 7.0 10 20 30 IC, COLLECTOR CURRENT (mA) 50 70 100 Figure 10. Current-Gain Bandwidth Product http://onsemi.com 4 MMPQ2222A 1.0 +0.5 TJ = 25C 0 VBE(sat) @ IC/IB = 10 0.6 COEFFICIENT (mV/ C) V, VOLTAGE (VOLTS) 0.8 1.0 V VBE(on) @ VCE = 10 V 0.4 0.2 RqVC for VCE(sat) -0.5 -1.0 -1.5 RqVB for VBE -2.0 VCE(sat) @ IC/IB = 10 0 0.1 0.2 50 100 200 0.5 1.0 2.0 5.0 10 20 IC, COLLECTOR CURRENT (mA) -2.5 500 1.0 k 0.1 0.2 Figure 11. "On" Voltages 0.5 1.0 2.0 5.0 10 20 50 100 200 IC, COLLECTOR CURRENT (mA) Figure 12. Temperature Coefficients http://onsemi.com 5 500 MMPQ2222A PACKAGE DIMENSIONS SO-16 CASE 751B-05 ISSUE J NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSIONS A AND B DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 (0.006) PER SIDE. 5. DIMENSION D DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 (0.005) TOTAL IN EXCESS OF THE D DIMENSION AT MAXIMUM MATERIAL CONDITION. -A- 16 9 -B- 1 P 8 PL 0.25 (0.010) 8 M B S G R K DIM A B C D F G J K M P R F X 45 _ C -T- SEATING PLANE J M D 16 PL 0.25 (0.010) M T B S A S SOLDERING FOOTPRINT 0.060 1.52 0.275 7.0 MILLIMETERS MIN MAX 9.80 10.00 3.80 4.00 1.35 1.75 0.35 0.49 0.40 1.25 1.27 BSC 0.19 0.25 0.10 0.25 0_ 7_ 5.80 6.20 0.25 0.50 STYLE 4: PIN 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. INCHES MIN MAX 0.386 0.393 0.150 0.157 0.054 0.068 0.014 0.019 0.016 0.049 0.050 BSC 0.008 0.009 0.004 0.009 0_ 7_ 0.229 0.244 0.010 0.019 COLLECTOR, DYE #1 COLLECTOR, #1 COLLECTOR, #2 COLLECTOR, #2 COLLECTOR, #3 COLLECTOR, #3 COLLECTOR, #4 COLLECTOR, #4 BASE, #4 EMITTER, #4 BASE, #3 EMITTER, #3 BASE, #2 EMITTER, #2 BASE, #1 EMITTER, #1 0.155 4.0 0.024 0.6 0.050 1.270 inches mm ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 http://onsemi.com 6 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative MMPQ2222A/D