GBU8A, GBU8B, GBU8D, GBU8G, GBU8J, GBU8K, GBU8M
www.vishay.com Vishay General Semiconductor
Revision: 05-Aug-15 1Document Number: 89375
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Glass Passivated Single-Phase Bridge Rectifier
FEATURES
UL recognition file number E54214
Ideal for printed circuit boards
High surge current capability
High case dielectric strength of 1500 VRMS
Solder dip 275 °C max. 10 s, per JESD 22-B106
Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
TYPICAL APPLICATIONS
General purpose use in AC/DC bridge full wave rectification
for monitor, TV, printer, power supply, switching mode
power supply, adapter, audio equipment, and home
appliances applications.
MECHANICAL DATA
Case: GBU
Molding compound meets UL 94 V-0 flammability rating
Base P/N-M3 - halogen-free, RoHS-compliant, and
commercial grade
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD22-B102
M3 suffix meets JESD 201 class 1A whisker test
Polarity: As marked on body
Mounting Torque: 10 cm-kg (8.8 inches-lbs) max.
Recommended Torque: 5.7 cm-kg (5 inches-lbs)
Notes
(1) Unit case mounted on aIuminum plate heatsink
(2) Units mounted on PCB with 0.5" x 0.5" (12 mm x 12 mm) copper pads and 0.375" (9.5 mm) lead length
PRIMARY CHARACTERISTICS
Package GBU
IF(AV) 8.0 A
VRRM 50 V, 100 V, 200 V, 400 V, 600 V,
800 V, 1000 V
IFSM 200 A
IR5 μA
VF at IF = 8.0 A 1.0 V
TJ max. 150 °C
Diode variations In-line
Case Style GBU
- ~ ~ +
Case Style GBU
+
~
~
-
~
~
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER SYMBOL GBU8A GBU8B GBU8D GBU8G GBU8J GBU8K GBU8M UNIT
Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V
Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V
Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V
Maximum average forward
rectified output current at
TC = 60 °C IF(AV) (1) 8.0
A
TA = 40 °C IF(AV) (2) 3.9
Peak forward surge current single sine-wave
superimposed on rated load IFSM 200 A
Rating for fusing (t < 8.3 ms) I2t 166 A2s
Operating junction and storage
temperature range TJ, TSTG -55 to +150 °C
GBU8A, GBU8B, GBU8D, GBU8G, GBU8J, GBU8K, GBU8M
www.vishay.com Vishay General Semiconductor
Revision: 05-Aug-15 2Document Number: 89375
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
(1) Units case mounted on aIuminum plate heatsink
(2) Units mounted in free air, no heatsink on PCB, 0.5" x 0.5" (12 mm x 12 mm) copper pads, 0.375" (9.5 mm) lead length
(3) Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat transfer with #6 screws
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)
Fig. 1 - Derating Curve Output Rectified Current Fig. 2 - Maximum Non-Repetitive Peak Forward Surge
Current Per Diode
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER TEST CONDITIONS SYMBOL GBU8A GBU8B GBU8D GBU8G GBU8J GBU8K GBU8M UNIT
Maximum
instantaneous forward
voltage drop per diode
8.0 A VF 1.0 V
Maximum DC reverse
current at rated DC
blocking voltage per diode
TA = 25 °C
IR
5.0
μA
TA = 125 °C 500
Typical junction
capacitance per diode 4 V, 1 MHz CJ 68 pF
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER SYMBOL GBU8A GBU8B GBU8D GBU8G GBU8J GBU8K GBU8M UNIT
Typical thermal resistance
RJA (2) 20
°C/W
RJC (1)(3) 4.0
ORDERING INFORMATION
PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE
GBU8J-M3/45 3.857 45 20 Tube
GBU8J-M3/51 3.857 51 250 Paper tray
050 100 150
0
2.0
4.0
6.0
8.0
25 75 125
Average Forw ard Output Current (A)
Temperature (°C)
Heatsink Mounting, TC
PCB Mounting, TA
0.47" x 0.47" (12 mm x 12 mm)
Copper Pads 0.375" (9.5 mm) Lead
Length 60 Hz Resistive or Inductive Load
110 100
0
50
100
150
200
250
T
J
= 150 °C
8.3 ms Single Half Sine-Wave
Number of Cycles at 60 Hz
Peak Forward Surge Current (A)
GBU8A, GBU8B, GBU8D, GBU8G, GBU8J, GBU8K, GBU8M
www.vishay.com Vishay General Semiconductor
Revision: 05-Aug-15 3Document Number: 89375
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 3 - Typical Forward Characteristics Per Diode
Fig. 4 - Typical Reverse Leakage Characteristics Per Diode
Fig. 5 - Typical Junction Capacitance Per Diode
Fig. 6 - Typical Transient Thermal Impedance Per Diode
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
0.4 0.6 0.8 1.0 1.2 1.4 1.6
0.01
1
100
10
0.1
InstantaneousForward Current (A)
InstantaneousForward Voltage (V)
TJ = 25 °C
Pulse Width = 300 μs
1 % Duty Cycle
0.01
0.1
1
10
100
1000
10 20 30 40 50 60 70 80 90 100
Instantaneous Reverse Current (μA)
Percent of Rated Peak Reverse Voltage (%)
TA= 150 °C
TA= 125 °C
TA= 100 °C
TA= 25 °C
10
100
1000
10 000
0.1 1 10 100
Junction Capacitance (pF)
Reverse Voltage (V)
TJ= 25 °C
f = 1.0 MHz
Vsi
g
= 50 mV
p
-
p
100
0.01 0.1 110 100
0.1
1
10
t - Heating Time (s)
Tran sient Thermal Impedance (°C/W)
Case Type GBU
Polarity shown on front side of case, positive lead by beveled corner
0.125 (3.2) x 45°
Chamfer
0.085 (2.16)
0.065 (1.65)
0.020 R (TYP.)
0.880 (22.3)
0.860 (21.8)
0.160 (4.1)
0.140 (3.5)
0.075
(1.9) R
.
0.080 (2.03)
0.060 (1.52)
0.050 (1.27)
0.040 (1.02)
0.080 (2.03)
0.065 (1.65) 0.210 (5.33)
0.190 (4.83)
0.140 (3.56)
0.130 (3.30)
9° TYP.
5° TYP.
0.085 (2.16)
0.075 (1.90)
0.026 (0.66)
0.020 (0.51)
0.310 (7.9)
0.290 (7.4)
0.740 (18.8)
0.720 (18.3)
0.710 (18.0)
0.690 (17.5)
0.100 (2.54)
0.085 (2.16)
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 01-Jan-2019 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2019 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED