1N5391G THRU 1N5399G GLASS PASSIVATED JUNCTION RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current - 1.5 Amperes Features Plastic package has Underwriters Laboratory Flammability Classification 94V-0 High temperature metallurgically bonded construction Glass passivated cavity-free junction Capable of meeting environmental standards of MIL-S-19500 1.5 ampere operation at TA=70 with no thermal runaway Typical IR less than 0.1 A High temperature soldering guaranteed: 350 /10 seconds, 0.375 (9.5mm) lead length, 5 lbs. (2.3kg) tension Mechanical Data DIM ENSIONS Case: DO-15 molded plastic over glass body Terminals: Plated axial leads, solderable per MIL-STD-750, method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.014 ounce, 0.395 gram inches DIM mm Min. Max. Min. Max. A 0.228 0.299 5.8 7.6 B 0.102 0.142 2.6 3.6 C 0.028 0.034 0.71 0.86 D 1.000 - 25.40 - Note Maximum Ratings and Electrical Characteristics Ratings at 25 ambient temperature unless otherwise specified. Symbols 1N53 91G 1N53 92G 1N53 93G 1N53 94G 1N53 95G 1N53 96G 1N53 97G 1N53 98G 1N53 99G Units Volts Maximum repetitive peak reverse voltage VRRM 50 100 200 300 400 500 600 800 1000 Maximum RMS voltage VRMS 35 70 140 210 280 350 420 560 700 Volts Maximum DC blocking voltage VDC 50 100 200 300 400 500 600 800 1000 Volts Maximum average forward rectified current 0.375" (9.5mm) lead length at TL=70 I(AV) 1.5 Amps Peak forward surge current 8.3mS single half sine-wave superimposed on rated load (MIL-STD-750D 4066 method) IFSM 50.0 Amps Maximum instantaneous forward voltage at 1.5A, TA=70 VF 1.4 Volts IR 5.0 300.0 A Maximum DC reverse current at rated DC blocking voltage TA=25 TA=150 Typical reverse recovery time (Note 1) Trr 2.0 S Typical junction capacitance (Note 2) CJ 15.0 F 45.0 /W Typical thermal resistance (Note 3) Operating junction and storage temperature range R JA TJ, TSTG -65 to +175 Notes: (1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A (2) Measured at 1.0MHz and applied reverse voltage of 4.0 volts (3) Thermal resistance from junction to ambient at 0.375 (9.5mm) lead length, P.C.B. mounted 1 RATINGS AND CHARACTERISTIC CURVES 2