LMV931. . . DBV (SOT-23-5) OR DCK (SC-70) PACKAGE
(TOP VIEW)
1
2
3
5
4
IN+
VCC−
IN−
VCC+
OUTPUT
LMV932. . . D (SOIC) OR
DGK (VSSOP/MSOP) PACKAGE
(TOP VIEW)
LMV934. . . D (SOIC) OR PW (TSSOP) PACKAGE
(TOP VIEW)
1
2
3
4
5
6
7
14
13
12
11
10
9
8
1OUT
1IN−
1IN+
VCC+
2IN+
2IN−
2OUT
4OUT
4IN−
4IN+
VCC−
3IN+
3IN−
3OUT
1
2
3
4
8
7
6
5
1OUT
1IN−
1IN+
VCC−
VCC+
2OUT
2IN−
2IN+
Not Recommended for New Designs
LMV932 DUAL, LMV934 QUAD
LMV931 SINGLE
www.ti.com
SLOS441G –AUGUST 2004–REVISED FEBRUARY 2006
1.8-V OPERATIONAL AMPLIFIERS
WITH RAIL-TO-RAIL INPUT AND OUTPUT
Check for Samples: LMV932 DUAL,LMV934 QUAD,LMV931 SINGLE
1FEATURES
• 1.8-V, 2.7-V, and 5-V Specifications
• Rail-to-Rail Output Swing
– 600-ΩLoad . . . 80 mV From Rail
– 2-kΩLoad . . . 30 mV From Rail
• VICR . . . 200 mV Beyond Rails
• Gain Bandwidth . . . 1.4 MHz
• Supply Current . . . 100 μA/Amplifier
• Max VIO ...4mV
• Space-Saving Packages
– LMV931: SOT-23 and SC-70
– LMV932: MSOP and SOIC
– LMV934: SOIC and TSSOP
APPLICATIONS
• Industrial (Utility/Energy Metering)
• Automotive
• Communications (Optical Telecom, Data/Voice
Cable Modems)
• Consumer Electronics (PDAs, PCs, CDR/W,
Portable Audio)
• Supply-Current Monitoring
• Battery Monitoring
DESCRIPTION/ORDERING INFORMATION
XXX
1Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date. Copyright © 2004–2006, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Not Recommended for New Designs
LMV932 DUAL, LMV934 QUAD
LMV931 SINGLE
SLOS441G –AUGUST 2004–REVISED FEBRUARY 2006
www.ti.com
ORDERING INFORMATION
TAPACKAGE(1) ORDERABLE PART NUMBER TOP-SIDE MARKING(2)
Reel of 3000 LMV931IDBVR RBB_
SOT-23 – DBV Reel of 250 LMV931IDBVT PREVIEW
Single Reel of 3000 LMV931IDCKR RB_
SC-70 – DCK Reel of 250 LMV931IDCKT PREVIEW
Reel of 2500 LMV932IDGKR RD_
MSOP/VSSOP – DGK Reel of 250 LMV932IDGKT PREVIEW
–40°C to 125°C Dual Tube of 75 LMV932ID
SOIC – D MV932I
Reel of 2500 LMV932IDR
Tube of 50 LMV934ID
SOIC – D LMV934I
Reel of 2500 LMV934IDR
Quad Tube of 90 LMV934IPW
TSSOP – PW MV934I
Reel of 2000 LMV934IPWR
(1) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
(2) DBV/DCK/DGK: The actual top-side marking has one additional character that designates the assembly/test site.
DESCRIPTION/ORDERING INFORMATION (CONTINUED)
The LMV93x devices are low-voltage low-power operational amplifiers that are well suited for today's low-voltage
and/or portable applications. Specified for operation of 1.8 V to 5 V, they can be used in portable applications
that are powered from a single-cell Li-ion or two-cell batteries. They have rail-to-rail input and output capability for
maximum signal swings in low-voltage applications. The LMV93x input common-mode voltage extends 200 mV
beyond the rails for increased flexibility. The output can swing rail-to-rail unloaded and typically can reach 80 mV
from the rails, while driving a 600-Ωload (at 1.8-V operation).
During 1.8-V operation, the devices typically consume a quiescent current of 103 μA per channel, and yet they
are able to achieve excellent electrical specifications, such as 101-dB open-loop DC gain and 1.4-MHz gain
bandwidth. Furthermore, the amplifiers offer good output drive characteristics, with the ability to drive a 600-Ω
load and 1000-pF capacitance with minimal ringing.
The LMV93x devices are offered in the latest packaging technology to meet the most demanding space-
constraint applications. The LMV931 is offered in standard SOT-23 and SC-70 packages. The LMV932 is
available in the traditional MSOP and SOIC packages. The LMV934 is available in the traditional SOIC and
TSSOP packages.
The LMV93x devices are characterized for operation from –40°C to 125°C, making the part universally suited for
commercial, industrial, and automotive applications.
2Copyright © 2004–2006, Texas Instruments Incorporated
IN+IN−
VBIAS1
Class AB
Control
VCC+
OUT
VCC−
Q1 Q4
Q3
Q2
M3 M4
I4
I3
M7 M8M8
M6
M5
I2I1
M2
M1
VBIAS2
IP
IN
Not Recommended for New Designs
LMV932 DUAL, LMV934 QUAD
LMV931 SINGLE
www.ti.com
SLOS441G –AUGUST 2004–REVISED FEBRUARY 2006
Figure 1. SIMPLIFIED SCHEMATIC
Copyright © 2004–2006, Texas Instruments Incorporated 3
Not Recommended for New Designs
LMV932 DUAL, LMV934 QUAD
LMV931 SINGLE
SLOS441G –AUGUST 2004–REVISED FEBRUARY 2006
www.ti.com
Absolute Maximum Ratings(1)
over free-air temperature range (unless otherwise noted) MIN MAX UNIT
VCC+ – VCC– Supply voltage(2) 5.5 V
VID Differential input voltage(3) Supply voltage
VIInput voltage range, either input VCC– – 0.2 VCC+ + 0.2 V
Duration of output short circuit (one amplifier) to VCC± (4) (5) Unlimited
D package (8 pin) 97
D package (14 pin) 86
DBV package 206
θJA Package thermal impedance(5) (6) °C/W
DCK package 252
DGK package 172
PW package 113
TJOperating virtual junction temperature 150 °C
Tstg Storage temperature range –65 150 °C
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating
Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values (except differential voltages and VCC specified for the measurement of IOS) are with respect to the network GND.
(3) Differential voltages are at IN+ with respect to IN–.
(4) Applies to both single-supply and split-supply operation. Continuous short-circuit operation at elevated ambient temperature can result in
exceeding the maximum allowed junction temperature of 150°C. Output currents in excess of 45 mA over long term may adversely
affect reliability.
(5) Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient
temperature is PD= (TJ(max) – TA)/θJA. Operating at the absolute maximum TJof 150°C can affect reliability.
(6) The package thermal impedance is calculated in accordance with JESD 51-7.
Recommended Operating Conditions MIN MAX UNIT
VCC Supply voltage (VCC+ – VCC–) 1.8 5 V
TAOperating free-air temperature –40 125 °C
ESD Protection
TYP UNIT
Human-Body Model 2000 V
Machine Model 200 V
4Copyright © 2004–2006, Texas Instruments Incorporated
aVIO
Not Recommended for New Designs
LMV932 DUAL, LMV934 QUAD
LMV931 SINGLE
www.ti.com
SLOS441G –AUGUST 2004–REVISED FEBRUARY 2006
Electrical Characteristics
VCC+ = 1.8 V, VCC– = 0 V, VIC = VCC+/2, VO= VCC+/2, and RL> 1 MΩ(unless otherwise noted)
PARAMETER TEST CONDITIONS TAMIN TYP MAX UNIT
25°C 1 4
LMV931 (single) Full range 6
VIO Input offset voltage mV
25°C 1 5.5
LMV932 (dual), LMV934 (quad) Full range 7.5
Average temperature
coefficient of input 25°C 5.5 μV/°C
offset voltage VIC = VCC+ – 0.8 V 25°C 15 35
IIB Input bias current 25°C 65 nA
Full range 75
25°C 13 25
IIO Input offset current nA
Full range 40
25°C 103 185
Supply current
ICC μA
(per channel) Full range 205
25°C 60 78
0≤VIC ≤0.6 V, 1.4 V ≤VIC ≤1.8 V –40°C to 55
85°C
Common-mode
CMRR dB
rejection ratio –40°C to
0.2 ≤VIC ≤0.6 V, 1.4 V ≤VIC ≤1.6 V 55
125°C
–0.2 ≤VIC ≤0 V, 1.8 V ≤VIC ≤2 V 25°C 50 72
25°C 75 100
Supply-voltage
kSVR 1.8 V ≤VCC+ ≤5 V, VIC = 0.5 V dB
rejection ratio Full range 70
25°C VCC– – 0.2 –0.2 to 2.1 VCC+ + 0.2
–40°C to
Common-mode VCC– VCC+
VICR CMRR ≥50 dB 85°C V
input voltage range –40°C to VCC– + 0.2 VCC+ – 0.2
125°C
25°C 77 101
RL= 600 Ω
to 0.9 V Full range 73
LMV931 25°C 80 105
RL= 2 kΩ
to 0.9 V Full range 75
Large-signal VO= 0.2 V to 1.6 V,
AVdB
voltage gain VIC = 0.5 V 25°C 75 90
RL= 600 Ω
to 0.9 V Full range 72
LMV932,
LMV934 25°C 78 100
RL= 2 kΩ
to 0.9 V Full range 75
25°C 1.65 1.72
High level Full range 1.63
RL= 600 Ωto 0.9 V,
VID = ±100 mV 25°C 0.077 0.105
Low level Full range 0.120
VOOutput swing V
25°C 1.75 1.77
High level Full range 1.74
RL= 2 kΩto 0.9 V,
VID = ±100 mV 25°C 0.024 0.035
Low level Full range 0.040
25°C 4 8
VO= 0 V, Sourcing
VID = 100 mV Full range 3.3
Output short-circuit
IOS mA
current 25°C 7 9
VO= 1.8 V, Sinking
VID = –100 mV Full range 5
Gain bandwidth
GBW 25°C 1.4 MHz
product
Copyright © 2004–2006, Texas Instruments Incorporated 5
Not Recommended for New Designs
LMV932 DUAL, LMV934 QUAD
LMV931 SINGLE
SLOS441G –AUGUST 2004–REVISED FEBRUARY 2006
www.ti.com
Electrical Characteristics (continued)
VCC+ = 1.8 V, VCC– = 0 V, VIC = VCC+/2, VO= VCC+/2, and RL> 1 MΩ(unless otherwise noted)
PARAMETER TEST CONDITIONS TAMIN TYP MAX UNIT
SR Slew rate(1) 25°C 0.35 V/μS
ΦmPhase margin 25°C 67 °
Gain margin 25°C 7 dB
Equivalent input
Vnf = 1 kHz, VIC = 0.5 V 25°C 60 nV/√Hz
noise voltage
Equivalent input
Inf = 1 kHz 25°C 0.06 pA/√Hz
noise current
Total harmonic f = 1 kHz, AV= 1, RL= 600 Ω,
THD 25°C 0.023 %
distortion VID = 1 Vp-p
Amplifier-to-amplifier 25°C 123 dB
isolation(2)
(1) Number specified is the slower of the positive and negative slew rates.
(2) Input referred, VCC+ = 5 V and RL= 100 kΩconnected to 2.5 V. Each amplifier is excited, in turn, with a 1-kHz signal to produce
VO= 3 Vp-p.
6Copyright © 2004–2006, Texas Instruments Incorporated
aVIO
Not Recommended for New Designs
LMV932 DUAL, LMV934 QUAD
LMV931 SINGLE
www.ti.com
SLOS441G –AUGUST 2004–REVISED FEBRUARY 2006
Electrical Characteristics
VCC+ = 2.7 V, VCC– = 0 V, VIC = VCC+/2, VO= VCC+/2, and RL> 1 MΩ(unless otherwise noted)
PARAMETER TEST CONDITIONS TAMIN TYP MAX UNIT
25°C 1 4
LMV931 (single) Full range 6
VIO Input offset voltage mV
25°C 1 5.5
LMV932 (dual), LMV934 (quad) Full range 7.5
Average temperature
coefficient of input 25°C 5.5 μV/°C
offset voltage VIC = VCC+ – 0.8 V 25°C 15 35
IIB Input bias current 25°C 65 nA
Full range 75
25°C 8 25
IIO Input offset current nA
Full range 40
25°C 105 190
Supply current
ICC μA
(per channel) Full range 210
25°C 60 81
0≤VIC ≤1.5 V, 2.3 V ≤VIC ≤2.7 V –40°C to 55
85°C
Common-mode
CMRR dB
rejection ratio –40°C to
0.2 ≤VIC ≤1.5 V, 2.3 V ≤VIC ≤2.5 V 55
125°C
–0.2 ≤VIC ≤0 V, 2.7 V ≤VIC ≤2.9 V 25°C 50 74
25°C 75 100
Supply-voltage
kSVR 1.8 V ≤VCC+ ≤5 V, VIC = 0.5 V dB
rejection ratio Full range 70
25°C VCC– – 0.2 –0.2 to 3 VCC+ + 0.2
–40°C to
Common-mode input VCC– VCC+
VICR CMRR ≥50 dB 85°C V
voltage range –40°C to VCC– + 0.2 VCC+ – 0.2
125°C
25°C 87 104
RL= 600 Ω
to 1.35 V Full range 86
LMV931 25°C 92 110
RL= 2 kΩ
to 1.35 V Full range 91
Large-signal
AVVO= 0.2 V to 2.5 V dB
voltage gain 25°C 78 90
RL= 600 Ω
to 1.35 V Full range 75
LMV932,
LMV934 25°C 81 100
RL= 2 kΩ
to 1.35 V Full range 78
25°C 2.55 2.62
High level Full range 2.53
RL= 600 Ωto 1.35 V,
VID = ±100 mV 25°C 0.083 0.11
Low level Full range 0.13
VOOutput swing V
25°C 2.65 2.675
High level Full range 2.64
RL= 2 kΩto 1.35 V,
VID = ±100 mV 25°C 0.025 0.04
Low level Full range 0.045
25°C 20 30
VO= 0 V, Sourcing
VID = 100 mV Full range 15
Output short-circuit
IOS mA
current 25°C 18 25
VO= 2.7 V, Sinking
VID = –100 mV Full range 12
GBW Gain bandwidth product 25°C 1.4 MHz
Copyright © 2004–2006, Texas Instruments Incorporated 7
Not Recommended for New Designs
LMV932 DUAL, LMV934 QUAD
LMV931 SINGLE
SLOS441G –AUGUST 2004–REVISED FEBRUARY 2006
www.ti.com
Electrical Characteristics (continued)
VCC+ = 2.7 V, VCC– = 0 V, VIC = VCC+/2, VO= VCC+/2, and RL> 1 MΩ(unless otherwise noted)
PARAMETER TEST CONDITIONS TAMIN TYP MAX UNIT
SR Slew rate(1) 25°C 0.4 V/μS
ΦmPhase margin 25°C 70 °
Gain margin 25°C 7.5 dB
Equivalent input
Vnf = 1 kHz, VIC = 0.5 V 25°C 57 nV/√Hz
noise voltage
Equivalent input
Inf = 1 kHz 25°C 0.082 pA/√Hz
noise current f = 1 kHz, AV= 1, RL= 600 Ω,
THD Total harmonic distortion 25°C 0.022 %
VID = 1 Vp-p
Amplifier-to-amplifier 25°C 123 dB
isolation(2)
(1) Number specified is the slower of the positive and negative slew rates.
(2) Input referred, VCC+ = 5 V and RL= 100 kΩconnected to 2.5 V. Each amplifier is excited, in turn, with a 1-kHz signal to produce
VO= 3 Vp-p.
8Copyright © 2004–2006, Texas Instruments Incorporated
aVIO
Not Recommended for New Designs
LMV932 DUAL, LMV934 QUAD
LMV931 SINGLE
www.ti.com
SLOS441G –AUGUST 2004–REVISED FEBRUARY 2006
Electrical Characteristics
VCC+ = 5 V, VCC– = 0 V, VIC = VCC+/2, VO= VCC+/2, and RL> 1 MΩ(unless otherwise noted)
PARAMETER TEST CONDITIONS TAMIN TYP MAX UNIT
25°C 1 4
LMV931 (single) Full range 6
VIO Input offset voltage mV
25°C 1 5.5
LMV932 (dual), LMV934 (quad) Full range 7.5
Average temperature
coefficient of input 25°C 5.5 μV/°C
offset voltage VIC = VCC+ – 0.8 V 25°C 15 35
IIB Input bias current 25°C 65 nA
Full range 75
25°C 9 25
IIO Input offset current nA
Full range 40
25°C 116 210
Supply current
ICC μA
(per channel) Full range 230
25°C 60 86
0≤VIC ≤3.8 V, 4.6 V ≤VIC ≤5 V –40°C to 55
85°C
Common-mode
CMRR dB
rejection ratio –40°C to
0.3 ≤VIC ≤3.8 V, 4.6 V ≤VIC ≤4.7 V 55
125°C
–0.2 ≤VIC ≤0 V, 5 V ≤VIC ≤5.2 V 25°C 50 78
25°C 75 100
Supply-voltage
kSVR 1.8 V ≤VCC+ ≤5 V, VIC = 0.5 V dB
rejection ratio Full range 70
25°C VCC– – 0.2 –0.2 to 5.3 VCC+ + 0.2
–40°C to
Common-mode input VCC– VCC+
VICR CMRR ≥50 dB 85°C V
voltage range –40°C to VCC– + 0.3 VCC+ – 0.3
125°C
25°C 88 102
RL= 600 Ω
to 2.5 V Full range 87
LMV931 25°C 94 113
RL= 2 kΩ
to 2.5 V Full range 93
Large-signal
AVVO= 0.2 V to 4.8 V dB
voltage gain 25°C 81 90
RL= 600 Ω
to 2.5 V Full range 78
LMV932,
LMV934 25°C 85 100
RL= 2 kΩ
to 2.5 V Full range 82
25°C 4.855 4.89
High level Full range 4.835
RL= 600 Ωto 2.5 V,
VID = ±100 mV 25°C 0.12 0.16
Low level Full range 0.18
VOOutput swing V
25°C 4.945 4.967
High level Full range 4.935
RL= 2 kΩto 2.5 V,
VID = ±100 mV 25°C 0.037 0.065
Low level Full range 0.075
25°C 80 100
VO= 0 V, Sourcing
VID = 100 mV Full range 68
Output short-circuit
IOS mA
current 25°C 58 65
VO= 5 V, Sinking
VID = –100 mV Full range 45
Gain bandwidth
GBW 25°C 1.5 MHz
product
Copyright © 2004–2006, Texas Instruments Incorporated 9
Not Recommended for New Designs
LMV932 DUAL, LMV934 QUAD
LMV931 SINGLE
SLOS441G –AUGUST 2004–REVISED FEBRUARY 2006
www.ti.com
Electrical Characteristics (continued)
VCC+ = 5 V, VCC– = 0 V, VIC = VCC+/2, VO= VCC+/2, and RL> 1 MΩ(unless otherwise noted)
PARAMETER TEST CONDITIONS TAMIN TYP MAX UNIT
SR Slew rate(1) 25°C 0.42 V/μS
ΦmPhase margin 25°C 71 °
Gain margin 25°C 8 dB
Equivalent input
Vnf = 1 kHz, VIC = 0.5 V 25°C 50 nV/√Hz
noise voltage
Equivalent input
Inf = 1 kHz 25°C 0.07 pA/√Hz
noise current
Total harmonic f = 1 kHz, AV= 1, RL= 600 Ω,
THD 25°C 0.022 %
distortion VID = 1 Vp-p
Amplifier-to-amplifier 25°C 123 dB
isolation(2)
(1) Number specified is the slower of the positive and negative slew rates.
(2) Input referred, VCC+ = 5 V and RL= 100 kΩconnected to 2.5 V. Each amplifier is excited, in turn, with a 1-kHz signal to produce
VO= 3 Vp-p.
10 Copyright © 2004–2006, Texas Instruments Incorporated
SINK CURRENT
vs
OUTPUT VOLTAGE
0.01
0.1
1
10
100
1000
0.001 0.01 0.1 110
Output Voltage Referenced to V− (V)
Sink Current − mA
5-V Sink
2.7-V Sink
1.8-V Sink
0.01
0.1
1
10
100
1000
0.001 0.01 0.1 110
Source Current − mA
SOURCE CURRENT
vs
OUTPUT VOLTAGE
5-V Source
1.8-V Source
2.7-V Source
Output Voltage Referenced to V+ (V)
0.25
0.3
0.35
0.4
0.45
0.5
0.55
0.6
0 1 2 3 4 5 6
Supply Voltage − V
SLEW RATE
vs
SUPPLY VOLTAGE
RL = 2 kΩ
AV = 1
VI = 1 Vpp Falling Edge
Rising Edge
Slew Rate − V/µs
−0.01
0.01
0.03
0.05
0.07
0.09
0.11
0.13
0.15
0.17
0 1 2 3 4 5
Supply Voltage − V
Supply Current − mA
SUPPLY CURRENT
vs
SUPPLY VOLTAGE
125°C
85°C
25°C
−40°C
Not Recommended for New Designs
LMV932 DUAL, LMV934 QUAD
LMV931 SINGLE
www.ti.com
SLOS441G –AUGUST 2004–REVISED FEBRUARY 2006
TYPICAL CHARACTERISTICS
VCC+ = 5 V, Single Supply, TA= 25°C (unless otherwise specified)
Figure 2. Figure 3.
Figure 4. Figure 5.
Copyright © 2004–2006, Texas Instruments Incorporated 11
SHORT-CIRCUIT CURRENT (SINK)
vs
TEMPERATURE
0
20
40
60
80
100
120
140
160
−40 −20 0 20 40 60 80 100 120
5-V Sink
2.7-V Sink
1.8-V Sink
Temperature − °C
Short-Circuit Current (Sink) − mA
0
20
40
60
80
100
120
140
160
−40 −20 0 20 40 60 80 100 120
SHORT-CIRCUIT CURRENT (SOURCE)
vs
TEMPERATURE
5-V Source
2.7-V Source
1.8-V Source
Temperature − °C
Short-Circuit Current (Source) − mA
0
5
10
15
20
25
30
35
40
45
0 1 2 3 4 5 6
Supply Voltage − V
OUTPUT VOLTAGE SWING
vs
SUPPLY VOLTAGE
RL = 2 kΩ
Negative Swing
Positive Swing
Voltage From Supply Voltage − mV Absolute
OUTPUT VOLTAGE SWING
vs
SUPPLY VOLTAGE
0
20
40
60
80
100
120
140
0 1 2 3 4 5 6
Supply Voltage − V
Voltage From Supply Voltage − mV Absolute
RL = 600 Ω
Negative Swing
Positive Swing
Not Recommended for New Designs
LMV932 DUAL, LMV934 QUAD
LMV931 SINGLE
SLOS441G –AUGUST 2004–REVISED FEBRUARY 2006
www.ti.com
TYPICAL CHARACTERISTICS (continued)
VCC+ = 5 V, Single Supply, TA= 25°C (unless otherwise specified)
Figure 6. Figure 7.
Figure 8. Figure 9.
12 Copyright © 2004–2006, Texas Instruments Incorporated
Not Recommended for New Designs
LMV932 DUAL, LMV934 QUAD
LMV931 SINGLE
www.ti.com
SLOS441G –AUGUST 2004–REVISED FEBRUARY 2006
TYPICAL CHARACTERISTICS (continued)
VCC+ = 5 V, Single Supply, TA= 25°C (unless otherwise specified)
Figure 10.
Figure 11.
Copyright © 2004–2006, Texas Instruments Incorporated 13
−10
0
10
20
30
40
50
60
10k 100k 1M 10M
Frequency − Hz
Gain − dB
Phase Margin − Deg
5-V FREQUENCY RESPONSE
vs
TEMPERATURE
Gain
VS = 5 V
RL = 600 Ω
CL = 150 pF
Phase
25°C
85°C
−40°C
125°C
85°C
125°C
−40°C25°C
−30
−10
10
30
50
70
90
110
−10
0
10
20
30
40
50
60
10k 100k 1M 10M
Frequency − Hz
Gain − dB
Phase Margin − Deg
1.8-V FREQUENCY RESPONSE
vs
TEMPERATURE
Gain
VS = 1.8 V
RL = 600 Ω
CL = 150 pF
Phase
−30
−10
10
30
50
70
90
110
25°C
85°C
−40°C
125°C
85°C
125°C
−40°C25°C
Not Recommended for New Designs
LMV932 DUAL, LMV934 QUAD
LMV931 SINGLE
SLOS441G –AUGUST 2004–REVISED FEBRUARY 2006
www.ti.com
TYPICAL CHARACTERISTICS (continued)
VCC+ = 5 V, Single Supply, TA= 25°C (unless otherwise specified)
Figure 12.
Figure 13.
14 Copyright © 2004–2006, Texas Instruments Incorporated
10 100 1k 10k 100k
Frequency − Hz
THD − %
0.001
0.01
0.1
1
10
THD
vs
FREQUENCY
RL = 600 Ω
AV = 1
1.8 V
2.7 V
5 V
0.001
0.01
0.1
1
10
Frequency − Hz
THD − %
THD
vs
FREQUENCY
10 100 1k 10k 100k
RL = 600 Ω
AV = 10
1.8 V
2.7 V
5 V
50
60
70
90
100
10 100 1k 10k 100k
Frequency − Hz
CMRR − dB
CMRR
vs
FREQUENCY
1.8 V
2.7 V
5 V
80
30
40
50
60
70
80
90
100
10 100 1k 10k
Frequency − Hz
Gain − dB
PSRR
vs
FREQUENCY
+PSRR
−PSRR
Not Recommended for New Designs
LMV932 DUAL, LMV934 QUAD
LMV931 SINGLE
www.ti.com
SLOS441G –AUGUST 2004–REVISED FEBRUARY 2006
TYPICAL CHARACTERISTICS (continued)
VCC+ = 5 V, Single Supply, TA= 25°C (unless otherwise specified)
Figure 14. Figure 15.
Figure 16. Figure 17.
Copyright © 2004–2006, Texas Instruments Incorporated 15
−1.8
−0.9
0
0.9
1.8
2.7
3.6
4.5
Output Voltage − V
−4.5
−3.6
−2.7
−1.8
−0.9
0
0.9
1.8
LARGE-SIGNAL NONINVERTING RESPONSE
VS = 1.8 V
RL = 2 kΩ
AV = 1 Input
Output
Input Voltage − V
10 µs/div"
0.05
SMALL-SIGNAL NONINVERTING RESPONSE
−0.1
−0.05
0
0.05
0.1
0.15
0.2
0.25
Output Voltage − V
−0.25
−0.2
−0.15
−0.1
−0.05
0
0.1
VS = 5 V
RL = 2 kΩInput
Output
Input Voltage − V
0.25 µs/div"
SMALL-SIGNAL NONINVERTING RESPONSE
−0.1
−0.05
0
0.05
0.1
0.15
0.2
0.25
Output Voltage − V
−0.25
−0.2
−0.15
−0.1
−0.05
0
0.05
0.1
VS = 2.7 V
RL = 2 kΩInput
Output
Input Voltage − V
0.25 µs/div"
−0.1
−0.05
0
0.05
0.1
0.15
0.2
0.25
Output Voltage − V
−0.25
0
Input Voltage − V
SMALL-SIGNAL NONINVERTING RESPONSE
VS = 1.8 V
RL = 2 kΩInput
Output
−0.2
−0.15
−0.1
−0.05
0.05
0.1
0.25 µs/div"
Not Recommended for New Designs
LMV932 DUAL, LMV934 QUAD
LMV931 SINGLE
SLOS441G –AUGUST 2004–REVISED FEBRUARY 2006
www.ti.com
TYPICAL CHARACTERISTICS (continued)
VCC+ = 5 V, Single Supply, TA= 25°C (unless otherwise specified)
Figure 18. Figure 19.
Figure 20. Figure 21.
16 Copyright © 2004–2006, Texas Instruments Incorporated
OFFSET VOLTAGE
vs
COMMON-MODE RANGE
−3
−2.5
−2
−1.5
−1
−0.5
0
0.5
1
−0.4 0 0.4 0.8 1.2 1.6 2 2.4
VS = 1.8 V
VIO − mV
VIC − V
125°C
85°C
25°C
−40°C
−3
−2.5
−2
−1.5
−1
−0.5
0
0.5
1
−0.4 0.1 0.6 1.1 1.6 2.1 2.6 3.1
OFFSET VOLTAGE
vs
COMMON-MODE RANGE
125°C
85°C
25°C
−40°C
VIO − mV
VIC − V
VS = 2.7 V
−5
−2.5
0
2.5
5
7.5
10
12.5
−12.5
−10
−7.5
−5
−2.5
0
2.5
5
Output Voltage − V
LARGE-SIGNAL NONINVERTING RESPONSE
VS = 5 V
RL = 2 kΩ
AV = 1 Input
Output
Input Voltage − V
10 µs/div"
Output Voltage − V
Input Voltage − V
LARGE-SIGNAL NONINVERTING RESPONSE
−2.7
−1.35
0
1.35
2.7
4.05
5.4
6.75
−6.75
−5.4
−4.05
−2.7
−1.35
0
1.35
2.7
VS = 2.7 V
RL = 2 kΩ
AV = 1 Input
Output
10 µs/div"
Not Recommended for New Designs
LMV932 DUAL, LMV934 QUAD
LMV931 SINGLE
www.ti.com
SLOS441G –AUGUST 2004–REVISED FEBRUARY 2006
TYPICAL CHARACTERISTICS (continued)
VCC+ = 5 V, Single Supply, TA= 25°C (unless otherwise specified)
Figure 22. Figure 23.
Figure 24. Figure 25.
Copyright © 2004–2006, Texas Instruments Incorporated 17
−3
−2.5
−2
−1.5
−1
−0.5
0
0.5
1
−0.4 0.6 1.6 2.6 3.6 4.6 5.6
OFFSET VOLTAGE
vs
COMMON-MODE RANGE
VIO − mV
VIC − V
VS = 5 V
125°C
85°C
25°C
−40°C
Not Recommended for New Designs
LMV932 DUAL, LMV934 QUAD
LMV931 SINGLE
SLOS441G –AUGUST 2004–REVISED FEBRUARY 2006
www.ti.com
TYPICAL CHARACTERISTICS (continued)
VCC+ = 5 V, Single Supply, TA= 25°C (unless otherwise specified)
Figure 26.
18 Copyright © 2004–2006, Texas Instruments Incorporated
PACKAGE OPTION ADDENDUM
www.ti.com 16-Aug-2012
Addendum-Page 1
PACKAGING INFORMATION
Orderable Device Status (1) Package Type Package
Drawing Pins Package Qty Eco Plan (2) Lead/
Ball Finish MSL Peak Temp (3) Samples
(Requires Login)
LMV931IDBVR NRND SOT-23 DBV 5 3000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LMV931IDBVRE4 NRND SOT-23 DBV 5 3000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LMV931IDBVRG4 NRND SOT-23 DBV 5 3000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LMV931IDCKR NRND SC70 DCK 5 3000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LMV931IDCKRE4 NRND SC70 DCK 5 3000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LMV931IDCKRG4 NRND SC70 DCK 5 3000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LMV932ID NRND SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LMV932IDE4 NRND SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LMV932IDG4 NRND SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LMV932IDGKR NRND VSSOP DGK 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LMV932IDGKRG4 NRND VSSOP DGK 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LMV932IDR NRND SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LMV932IDRE4 NRND SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LMV932IDRG4 NRND SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LMV934ID NRND SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LMV934IDE4 NRND SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LMV934IDG4 NRND SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
PACKAGE OPTION ADDENDUM
www.ti.com 16-Aug-2012
Addendum-Page 2
Orderable Device Status (1) Package Type Package
Drawing Pins Package Qty Eco Plan (2) Lead/
Ball Finish MSL Peak Temp (3) Samples
(Requires Login)
LMV934IDR NRND SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LMV934IDRE4 NRND SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LMV934IDRG4 NRND SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LMV934IPW NRND TSSOP PW 14 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LMV934IPWE4 NRND TSSOP PW 14 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LMV934IPWG4 NRND TSSOP PW 14 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LMV934IPWR NRND TSSOP PW 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LMV934IPWRE4 NRND TSSOP PW 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LMV934IPWRG4 NRND TSSOP PW 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
PACKAGE OPTION ADDENDUM
www.ti.com 16-Aug-2012
Addendum-Page 3
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
OTHER QUALIFIED VERSIONS OF LMV931, LMV932, LMV934 :
•Automotive: LMV931-Q1, LMV932-Q1, LMV934-Q1
NOTE: Qualified Version Definitions:
•Automotive - Q100 devices qualified for high-reliability automotive applications targeting zero defects
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device Package
Type Package
Drawing Pins SPQ Reel
Diameter
(mm)
Reel
Width
W1 (mm)
A0
(mm) B0
(mm) K0
(mm) P1
(mm) W
(mm) Pin1
Quadrant
LMV931IDBVR SOT-23 DBV 5 3000 180.0 9.2 3.17 3.23 1.37 4.0 8.0 Q3
LMV931IDBVR SOT-23 DBV 5 3000 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3
LMV931IDCKR SC70 DCK 5 3000 180.0 9.2 2.3 2.55 1.2 4.0 8.0 Q3
LMV931IDCKR SC70 DCK 5 3000 178.0 9.0 2.4 2.5 1.2 4.0 8.0 Q3
LMV932IDGKR VSSOP DGK 8 2500 330.0 12.4 5.3 3.4 1.4 8.0 12.0 Q1
LMV932IDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1
LMV934IDR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
LMV934IPWR TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1
PACKAGE MATERIALS INFORMATION
www.ti.com 16-Aug-2012
Pack Materials-Page 1
*All dimensions are nominal
Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm)
LMV931IDBVR SOT-23 DBV 5 3000 205.0 200.0 33.0
LMV931IDBVR SOT-23 DBV 5 3000 180.0 180.0 18.0
LMV931IDCKR SC70 DCK 5 3000 205.0 200.0 33.0
LMV931IDCKR SC70 DCK 5 3000 180.0 180.0 18.0
LMV932IDGKR VSSOP DGK 8 2500 358.0 335.0 35.0
LMV932IDR SOIC D 8 2500 340.5 338.1 20.6
LMV934IDR SOIC D 14 2500 367.0 367.0 38.0
LMV934IPWR TSSOP PW 14 2000 367.0 367.0 35.0
PACKAGE MATERIALS INFORMATION
www.ti.com 16-Aug-2012
Pack Materials-Page 2
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which
have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such
components to meet such requirements.
Products Applications
Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive
Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications
Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers
DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps
DSP dsp.ti.com Energy and Lighting www.ti.com/energy
Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial
Interface interface.ti.com Medical www.ti.com/medical
Logic logic.ti.com Security www.ti.com/security
Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense
Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video
RFID www.ti-rfid.com
OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com
Wireless Connectivity www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2012, Texas Instruments Incorporated