Not Recommended for New Designs LMV932 DUAL, LMV934 QUAD LMV931 SINGLE www.ti.com SLOS441G - AUGUST 2004 - REVISED FEBRUARY 2006 1.8-V OPERATIONAL AMPLIFIERS WITH RAIL-TO-RAIL INPUT AND OUTPUT Check for Samples: LMV932 DUAL, LMV934 QUAD, LMV931 SINGLE FEATURES 1 * * * * * * * 1.8-V, 2.7-V, and 5-V Specifications Rail-to-Rail Output Swing - 600- Load . . . 80 mV From Rail - 2-k Load . . . 30 mV From Rail VICR . . . 200 mV Beyond Rails Gain Bandwidth . . . 1.4 MHz Supply Current . . . 100 A/Amplifier Max VIO . . . 4 mV Space-Saving Packages - LMV931: SOT-23 and SC-70 - LMV932: MSOP and SOIC - LMV934: SOIC and TSSOP LMV931 . . . DBV (SOT-23-5) OR DCK (SC-70) PACKAGE (TOP VIEW) IN+ 1 VCC- IN- 2 3 5 VCC+ 4 OUTPUT LMV932 . . . D (SOIC) OR DGK (VSSOP/MSOP) PACKAGE (TOP VIEW) 1OUT 1IN- 1IN+ VCC- 1 8 2 7 3 6 4 5 VCC+ 2OUT 2IN- 2IN+ APPLICATIONS * * * * * * Industrial (Utility/Energy Metering) Automotive Communications (Optical Telecom, Data/Voice Cable Modems) Consumer Electronics (PDAs, PCs, CDR/W, Portable Audio) Supply-Current Monitoring Battery Monitoring LMV934 . . . D (SOIC) OR PW (TSSOP) PACKAGE (TOP VIEW) 1OUT 1IN- 1IN+ VCC+ 2IN+ 2IN- 2OUT 1 14 2 13 3 12 4 11 5 10 6 9 7 8 4OUT 4IN- 4IN+ VCC- 3IN+ 3IN- 3OUT DESCRIPTION/ORDERING INFORMATION XXX 1 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright (c) 2004-2006, Texas Instruments Incorporated LMV932 DUAL, LMV934 QUAD LMV931 SINGLE Not Recommended for New Designs SLOS441G - AUGUST 2004 - REVISED FEBRUARY 2006 www.ti.com ORDERING INFORMATION PACKAGE (1) TA SOT-23 - DBV Single SC-70 - DCK MSOP/VSSOP - DGK -40C to 125C Dual SOIC - D SOIC - D Quad TSSOP - PW (1) (2) ORDERABLE PART NUMBER TOP-SIDE MARKING (2) Reel of 3000 LMV931IDBVR RBB_ Reel of 250 LMV931IDBVT PREVIEW Reel of 3000 LMV931IDCKR RB_ Reel of 250 LMV931IDCKT PREVIEW Reel of 2500 LMV932IDGKR RD_ Reel of 250 LMV932IDGKT PREVIEW Tube of 75 LMV932ID Reel of 2500 LMV932IDR Tube of 50 LMV934ID Reel of 2500 LMV934IDR Tube of 90 LMV934IPW Reel of 2000 LMV934IPWR MV932I LMV934I MV934I Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. DBV/DCK/DGK: The actual top-side marking has one additional character that designates the assembly/test site. DESCRIPTION/ORDERING INFORMATION (CONTINUED) The LMV93x devices are low-voltage low-power operational amplifiers that are well suited for today's low-voltage and/or portable applications. Specified for operation of 1.8 V to 5 V, they can be used in portable applications that are powered from a single-cell Li-ion or two-cell batteries. They have rail-to-rail input and output capability for maximum signal swings in low-voltage applications. The LMV93x input common-mode voltage extends 200 mV beyond the rails for increased flexibility. The output can swing rail-to-rail unloaded and typically can reach 80 mV from the rails, while driving a 600- load (at 1.8-V operation). During 1.8-V operation, the devices typically consume a quiescent current of 103 A per channel, and yet they are able to achieve excellent electrical specifications, such as 101-dB open-loop DC gain and 1.4-MHz gain bandwidth. Furthermore, the amplifiers offer good output drive characteristics, with the ability to drive a 600- load and 1000-pF capacitance with minimal ringing. The LMV93x devices are offered in the latest packaging technology to meet the most demanding spaceconstraint applications. The LMV931 is offered in standard SOT-23 and SC-70 packages. The LMV932 is available in the traditional MSOP and SOIC packages. The LMV934 is available in the traditional SOIC and TSSOP packages. The LMV93x devices are characterized for operation from -40C to 125C, making the part universally suited for commercial, industrial, and automotive applications. 2 Copyright (c) 2004-2006, Texas Instruments Incorporated Not Recommended for New Designs www.ti.com LMV932 DUAL, LMV934 QUAD LMV931 SINGLE SLOS441G - AUGUST 2004 - REVISED FEBRUARY 2006 Figure 1. SIMPLIFIED SCHEMATIC VCC+ VBIAS1 IP I1 I2 M5 M1 Q1 IN- M6 M2 Class AB Control Q4 OUT Q2 IN+ Q3 IN VBIAS2 M3 M4 I3 I4 M7 M8 VCC- Copyright (c) 2004-2006, Texas Instruments Incorporated 3 LMV932 DUAL, LMV934 QUAD LMV931 SINGLE Not Recommended for New Designs SLOS441G - AUGUST 2004 - REVISED FEBRUARY 2006 www.ti.com Absolute Maximum Ratings (1) over free-air temperature range (unless otherwise noted) MIN MAX (2) VCC+ - VCC- Supply voltage VID Differential input voltage (3) VI Input voltage range, either input 5.5 V VCC+ + 0.2 V Supply voltage VCC- - 0.2 Duration of output short circuit (one amplifier) to VCC (4) (5) Unlimited D package (8 pin) 97 D package (14 pin) Package thermal impedance (5) JA (6) TJ Operating virtual junction temperature Tstg Storage temperature range (1) (2) (3) (4) (5) (6) UNIT 86 DBV package 206 DCK package 252 DGK package 172 PW package 113 -65 C/W 150 C 150 C Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. All voltage values (except differential voltages and VCC specified for the measurement of IOS) are with respect to the network GND. Differential voltages are at IN+ with respect to IN-. Applies to both single-supply and split-supply operation. Continuous short-circuit operation at elevated ambient temperature can result in exceeding the maximum allowed junction temperature of 150C. Output currents in excess of 45 mA over long term may adversely affect reliability. Maximum power dissipation is a function of TJ(max), JA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ(max) - TA)/JA. Operating at the absolute maximum TJ of 150C can affect reliability. The package thermal impedance is calculated in accordance with JESD 51-7. Recommended Operating Conditions MIN MAX VCC Supply voltage (VCC+ - VCC-) 1.8 5 UNIT V TA Operating free-air temperature -40 125 C ESD Protection Human-Body Model Machine Model 4 TYP UNIT 2000 V 200 V Copyright (c) 2004-2006, Texas Instruments Incorporated Not Recommended for New Designs www.ti.com LMV932 DUAL, LMV934 QUAD LMV931 SINGLE SLOS441G - AUGUST 2004 - REVISED FEBRUARY 2006 Electrical Characteristics VCC+ = 1.8 V, VCC- = 0 V, VIC = VCC+/2, VO = VCC+/2, and RL > 1 M (unless otherwise noted) PARAMETER TEST CONDITIONS IO Input offset voltage Average temperature coefficient of input offset voltage VIC = VCC+ - 0.8 V IIB Input bias current IIO Input offset current ICC Supply current (per channel) Common-mode rejection ratio Supply-voltage rejection ratio Common-mode input voltage range 0.2 VIC 0.6 V, 1.4 V VIC 1.6 V 1.8 V VCC+ 5 V, VIC = 0.5 V CMRR 50 dB VO = 0.2 V to 1.6 V, VIC = 0.5 V LMV932, LMV934 RL = 2 k to 0.9 V RL = 600 to 0.9 V RL = 2 k to 0.9 V High level RL = 600 to 0.9 V, VID = 100 mV Low level VO Output swing High level RL = 2 k to 0.9 V, VID = 100 mV Low level IOS GBW Output short-circuit current 5.5 25C 5.5 25C VO = 0 V, VID = 100 mV Sourcing 15 VO = 1.8 V, VID = -100 mV Sinking Gain bandwidth product Copyright (c) 2004-2006, Texas Instruments Incorporated 35 65 Full range 75 13 25 40 103 185 205 25C 60 -40C to 85C 55 -40C to 125C 55 25C 50 72 25C 75 100 Full range 70 nA A dB dB VCC- - 0.2 -0.2 to 2.1 VCC+ + 0.2 VCC- VCC+ -40C to 125C VCC- + 0.2 VCC+ - 0.2 25C 77 Full range 73 25C 80 Full range 75 25C 75 Full range 72 25C 78 Full range 75 25C 1.65 Full range 1.63 25C 105 dB 90 100 1.72 0.077 0.105 0.120 25C 1.75 Full range 1.74 25C V 101 Full range 1.77 0.024 Full range V 0.035 0.040 4 8 3.3 25C 7 Full range 5 25C nA 78 -40C to 85C Full range mV V/C 25C 25C UNIT 7.5 25C LMV931 Large-signal voltage gain 1 Full range RL = 600 to 0.9 V AV 4 Full range 25C VICR 1 Full range -0.2 VIC 0 V, 1.8 V VIC 2 V kSVR MAX 6 25C 25C 0 VIC 0.6 V, 1.4 V VIC 1.8 V CMRR TYP Full range LMV932 (dual), LMV934 (quad) aV MIN 25C LMV931 (single) VIO TA 9 1.4 mA MHz 5 LMV932 DUAL, LMV934 QUAD LMV931 SINGLE Not Recommended for New Designs SLOS441G - AUGUST 2004 - REVISED FEBRUARY 2006 www.ti.com Electrical Characteristics (continued) VCC+ = 1.8 V, VCC- = 0 V, VIC = VCC+/2, VO = VCC+/2, and RL > 1 M (unless otherwise noted) PARAMETER TEST CONDITIONS (1) TA MIN TYP MAX UNIT SR Slew rate 25C 0.35 m Phase margin 25C 67 V/S Gain margin 25C 7 dB Vn Equivalent input noise voltage f = 1 kHz, VIC = 0.5 V 25C 60 nV/Hz In Equivalent input noise current f = 1 kHz 25C 0.06 pA/Hz THD Total harmonic distortion f = 1 kHz, AV = 1, RL = 600 , VID = 1 Vp-p 25C 0.023 % 25C 123 dB Amplifier-to-amplifier isolation (2) (1) (2) 6 Number specified is the slower of the positive and negative slew rates. Input referred, VCC+ = 5 V and RL = 100 k connected to 2.5 V. Each amplifier is excited, in turn, with a 1-kHz signal to produce VO = 3 Vp-p. Copyright (c) 2004-2006, Texas Instruments Incorporated Not Recommended for New Designs www.ti.com LMV932 DUAL, LMV934 QUAD LMV931 SINGLE SLOS441G - AUGUST 2004 - REVISED FEBRUARY 2006 Electrical Characteristics VCC+ = 2.7 V, VCC- = 0 V, VIC = VCC+/2, VO = VCC+/2, and RL > 1 M (unless otherwise noted) PARAMETER TEST CONDITIONS IO Input offset voltage Average temperature coefficient of input offset voltage VIC = VCC+ - 0.8 V IIB Input bias current IIO Input offset current ICC Supply current (per channel) kSVR 25C 5.5 25C Common-mode rejection ratio Supply-voltage rejection ratio 15 Common-mode input voltage range 65 75 8 105 Large-signal voltage gain 0.2 VIC 1.5 V, 2.3 V VIC 2.5 V -40C to 125C 55 -0.2 VIC 0 V, 2.7 V VIC 2.9 V 25C 50 74 25C 75 100 Full range 70 VO = 0.2 V to 2.5 V RL = 600 to 1.35 V RL = 2 k to 1.35 V RL = 600 to 1.35 V, VID = 100 mV Low level Output swing High level RL = 2 k to 1.35 V, VID = 100 mV Low level Output short-circuit current VO = 0 V, VID = 100 mV Sourcing VO = 2.7 V, VID = -100 mV Sinking Gain bandwidth product Copyright (c) 2004-2006, Texas Instruments Incorporated 190 210 55 RL = 2 k to 1.35 V 25 40 60 CMRR 50 dB 35 Full range 25C 1.8 V VCC+ 5 V, VIC = 0.5 V nA nA A 81 dB VCC- - 0.2 -0.2 to 3 dB VCC+ + 0.2 -40C to 85C VCC- VCC+ -40C to 125C VCC- + 0.2 VCC+ - 0.2 25C 87 Full range 86 25C 92 Full range 91 25C 78 Full range 75 25C 81 Full range 78 25C 2.55 Full range 2.53 25C 110 dB 90 100 2.62 0.083 0.11 0.13 25C 2.65 Full range 2.64 25C V 104 Full range 2.675 0.025 Full range V 0.04 0.045 25C 20 Full range 15 25C 18 Full range 12 25C mV V/C 25C -40C to 85C High level GBW 5.5 UNIT 7.5 25C LMV932, LMV934 IOS 1 Full range LMV931 VO 4 Full range RL = 600 to 1.35 V AV 1 Full range 25C VICR MAX 6 25C 25C 0 VIC 1.5 V, 2.3 V VIC 2.7 V CMRR TYP Full range LMV932 (dual), LMV934 (quad) aV MIN 25C LMV931 (single) VIO TA 30 25 1.4 mA MHz 7 LMV932 DUAL, LMV934 QUAD LMV931 SINGLE Not Recommended for New Designs SLOS441G - AUGUST 2004 - REVISED FEBRUARY 2006 www.ti.com Electrical Characteristics (continued) VCC+ = 2.7 V, VCC- = 0 V, VIC = VCC+/2, VO = VCC+/2, and RL > 1 M (unless otherwise noted) PARAMETER TEST CONDITIONS (1) TA MIN TYP MAX UNIT SR Slew rate 25C 0.4 m Phase margin 25C 70 V/S Gain margin 25C 7.5 dB Vn Equivalent input noise voltage f = 1 kHz, VIC = 0.5 V 25C 57 nV/Hz In Equivalent input noise current f = 1 kHz 25C 0.082 pA/Hz THD Total harmonic distortion f = 1 kHz, AV = 1, RL = 600 , VID = 1 Vp-p 25C 0.022 % 25C 123 dB Amplifier-to-amplifier isolation (2) (1) (2) 8 Number specified is the slower of the positive and negative slew rates. Input referred, VCC+ = 5 V and RL = 100 k connected to 2.5 V. Each amplifier is excited, in turn, with a 1-kHz signal to produce VO = 3 Vp-p. Copyright (c) 2004-2006, Texas Instruments Incorporated Not Recommended for New Designs www.ti.com LMV932 DUAL, LMV934 QUAD LMV931 SINGLE SLOS441G - AUGUST 2004 - REVISED FEBRUARY 2006 Electrical Characteristics VCC+ = 5 V, VCC- = 0 V, VIC = VCC+/2, VO = VCC+/2, and RL > 1 M (unless otherwise noted) PARAMETER TEST CONDITIONS IO Input offset voltage Average temperature coefficient of input offset voltage VIC = VCC+ - 0.8 V IIB Input bias current IIO Input offset current ICC Supply current (per channel) Common-mode rejection ratio Supply-voltage rejection ratio Common-mode input voltage range 0.3 VIC 3.8 V, 4.6 V VIC 4.7 V 1.8 V VCC+ 5 V, VIC = 0.5 V CMRR 50 dB RL = 2 k to 2.5 V VO = 0.2 V to 4.8 V RL = 600 to 2.5 V LMV932, LMV934 RL = 2 k to 2.5 V High level RL = 600 to 2.5 V, VID = 100 mV Low level VO Output swing High level RL = 2 k to 2.5 V, VID = 100 mV Low level IOS GBW Output short-circuit current 5.5 VO = 0 V, VID = 100 mV Sourcing VO = 5 V, VID = -100 mV Sinking Gain bandwidth product 25C 5.5 25C Copyright (c) 2004-2006, Texas Instruments Incorporated mV 15 V/C 35 25C 65 Full range 75 9 25 40 116 210 230 25C 60 -40C to 85C 55 -40C to 125C 55 25C 50 78 25C 75 100 Full range 70 nA nA A 86 dB VCC- - 0.2 -0.2 to 5.3 dB VCC+ + 0.2 -40C to 85C VCC- VCC+ -40C to 125C VCC- + 0.3 VCC+ - 0.3 25C 88 Full range 87 25C 94 Full range 93 25C 81 Full range 78 25C 85 Full range 82 25C 4.855 Full range 4.835 25C 113 dB 90 100 4.89 0.12 0.16 0.18 25C 4.945 Full range 4.935 25C V 102 Full range 4.967 0.037 Full range V 0.065 0.075 25C 80 Full range 68 25C 58 Full range 45 25C UNIT 7.5 25C LMV931 Large-signal voltage gain 1 Full range RL = 600 to 2.5 V AV 4 Full range 25C VICR 1 Full range -0.2 VIC 0 V, 5 V VIC 5.2 V kSVR MAX 6 25C 25C 0 VIC 3.8 V, 4.6 V VIC 5 V CMRR TYP Full range LMV932 (dual), LMV934 (quad) aV MIN 25C LMV931 (single) VIO TA 100 65 1.5 mA MHz 9 LMV932 DUAL, LMV934 QUAD LMV931 SINGLE Not Recommended for New Designs SLOS441G - AUGUST 2004 - REVISED FEBRUARY 2006 www.ti.com Electrical Characteristics (continued) VCC+ = 5 V, VCC- = 0 V, VIC = VCC+/2, VO = VCC+/2, and RL > 1 M (unless otherwise noted) PARAMETER TEST CONDITIONS (1) TA MIN TYP MAX UNIT SR Slew rate 25C 0.42 m Phase margin 25C 71 V/S Gain margin 25C 8 dB Vn Equivalent input noise voltage f = 1 kHz, VIC = 0.5 V 25C 50 nV/Hz In Equivalent input noise current f = 1 kHz 25C 0.07 pA/Hz THD Total harmonic distortion f = 1 kHz, AV = 1, RL = 600 , VID = 1 Vp-p 25C 0.022 % 25C 123 dB Amplifier-to-amplifier isolation (2) (1) (2) 10 Number specified is the slower of the positive and negative slew rates. Input referred, VCC+ = 5 V and RL = 100 k connected to 2.5 V. Each amplifier is excited, in turn, with a 1-kHz signal to produce VO = 3 Vp-p. Copyright (c) 2004-2006, Texas Instruments Incorporated Not Recommended for New Designs www.ti.com LMV932 DUAL, LMV934 QUAD LMV931 SINGLE SLOS441G - AUGUST 2004 - REVISED FEBRUARY 2006 TYPICAL CHARACTERISTICS VCC+ = 5 V, Single Supply, TA = 25C (unless otherwise specified) SLEW RATE vs SUPPLY VOLTAGE SUPPLY CURRENT vs SUPPLY VOLTAGE 0.6 0.17 RL = 2 k AV = 1 VI = 1 Vpp 125C 0.15 0.55 25C Falling Edge 0.5 0.11 Slew Rate - V/s Supply Current - mA 85C 0.13 -40C 0.09 0.07 0.05 0.4 0.35 0.03 0.01 -0.01 Rising Edge 0.45 0.3 0 1 2 3 4 5 0.25 Supply Voltage - V 0 1 2 3 4 5 Figure 2. Figure 3. SOURCE CURRENT vs OUTPUT VOLTAGE SINK CURRENT vs OUTPUT VOLTAGE 1000 1000 5-V Source 5-V Sink 100 2.7-V Source 10 1.8-V Source 1 0.1 Sink Current - mA Source Current - mA 100 0.01 0.001 6 Supply Voltage - V 2.7-V Sink 10 1.8-V Sink 1 0.1 0.01 0.1 1 Output Voltage Referenced to V+ (V) Figure 4. Copyright (c) 2004-2006, Texas Instruments Incorporated 10 0.01 0.001 0.01 0.1 1 10 Output Voltage Referenced to V- (V) Figure 5. 11 LMV932 DUAL, LMV934 QUAD LMV931 SINGLE Not Recommended for New Designs SLOS441G - AUGUST 2004 - REVISED FEBRUARY 2006 www.ti.com TYPICAL CHARACTERISTICS (continued) VCC+ = 5 V, Single Supply, TA = 25C (unless otherwise specified) OUTPUT VOLTAGE SWING vs SUPPLY VOLTAGE OUTPUT VOLTAGE SWING vs SUPPLY VOLTAGE 45 RL = 600 Voltage From Supply Voltage - mV Absolute Voltage From Supply Voltage - mV Absolute 140 120 100 Negative Swing 80 60 Positive Swing 40 20 0 0 1 2 3 4 5 6 RL = 2 k 40 35 Negative Swing 30 25 20 15 Positive Swing 10 5 0 0 1 2 Supply Voltage - V 3 4 5 6 Supply Voltage - V Figure 6. Figure 7. SHORT-CIRCUIT CURRENT (SINK) vs TEMPERATURE SHORT-CIRCUIT CURRENT (SOURCE) vs TEMPERATURE 160 160 5-V Source 140 5-V Sink Short-Circuit Current (Source) - mA Short-Circuit Current (Sink) - mA 140 120 100 80 60 2.7-V Sink 40 20 0 -40 0 20 40 Temperature - C Figure 8. 12 100 80 60 2.7-V Source 40 20 1.8-V Sink -20 120 60 80 100 120 1.8-V Source 0 -40 -20 0 20 40 60 80 100 120 Temperature - C Figure 9. Copyright (c) 2004-2006, Texas Instruments Incorporated Not Recommended for New Designs www.ti.com LMV932 DUAL, LMV934 QUAD LMV931 SINGLE SLOS441G - AUGUST 2004 - REVISED FEBRUARY 2006 TYPICAL CHARACTERISTICS (continued) VCC+ = 5 V, Single Supply, TA = 25C (unless otherwise specified) 1.8-V FREQUENCY RESPONSE vs CL Phase Gain - dB 110 VS = 1.8 V RL = 600 50 90 40 70 Gain 30 50 20 30 10 10 -10 CL = 0 pF CL = 300 pF CL = 1000 pF 0 -10 10k Phase Margin - Deg 60 100k -30 10M 1M Frequency - Hz Figure 10. 60 Phase 50 110 90 70 40 Gain - dB VS = 5 V RL = 600 Gain 30 50 20 30 10 10 0 CL = 0 pF CL = 300 pF CL = 1000 pF -10 10k Phase Margin - Deg 5-V FREQUENCY RESPONSE vs CL -10 1M 100k -30 10M Frequency - Hz Figure 11. Copyright (c) 2004-2006, Texas Instruments Incorporated 13 LMV932 DUAL, LMV934 QUAD LMV931 SINGLE Not Recommended for New Designs SLOS441G - AUGUST 2004 - REVISED FEBRUARY 2006 www.ti.com TYPICAL CHARACTERISTICS (continued) VCC+ = 5 V, Single Supply, TA = 25C (unless otherwise specified) 1.8-V FREQUENCY RESPONSE vs TEMPERATURE 60 110 Phase 50 Gain - dB 40 90 70 25C Gain 30 -40C 20 25C 85C 85C 125C 10 50 30 Phase Margin - Deg VS = 1.8 V RL = 600 CL = 150 pF 10 125C 0 -10 -40C -10 10k 100k -30 10M 1M Frequency - Hz Figure 12. 5-V FREQUENCY RESPONSE vs TEMPERATURE 110 VS = 5 V RL = 600 CL = 150 pF Phase 50 Gain - dB 40 90 70 25C Gain 30 -40C 20 85C 125C 85C 125C 10 -40C 0 -10 10k 50 25C 100k 1M 30 Phase Margin - Deg 60 10 -10 -30 10M Frequency - Hz Figure 13. 14 Copyright (c) 2004-2006, Texas Instruments Incorporated Not Recommended for New Designs www.ti.com LMV932 DUAL, LMV934 QUAD LMV931 SINGLE SLOS441G - AUGUST 2004 - REVISED FEBRUARY 2006 TYPICAL CHARACTERISTICS (continued) VCC+ = 5 V, Single Supply, TA = 25C (unless otherwise specified) PSRR vs FREQUENCY CMRR vs FREQUENCY 100 100 1.8 V 2.7 V 5V 90 90 +PSRR -PSRR 80 Gain - dB CMRR - dB 80 70 70 60 50 60 40 50 10 30 100 1k 10k 10 100k 100 10k Frequency - Hz Frequency - Hz Figure 14. Figure 15. THD vs FREQUENCY THD vs FREQUENCY 10 10 RL = 600 AV = 10 RL = 600 AV = 1 1 THD - % 1 THD - % 1k 0.1 0.01 0.1 0.01 1.8 V 2.7 V 5V 1.8 V 2.7 V 5V 0.001 0.001 10 100 1k Frequency - Hz Figure 16. Copyright (c) 2004-2006, Texas Instruments Incorporated 10k 100k 10 100 1k Frequency - Hz 10k 100k Figure 17. 15 LMV932 DUAL, LMV934 QUAD LMV931 SINGLE Not Recommended for New Designs SLOS441G - AUGUST 2004 - REVISED FEBRUARY 2006 www.ti.com TYPICAL CHARACTERISTICS (continued) VCC+ = 5 V, Single Supply, TA = 25C (unless otherwise specified) SMALL-SIGNAL NONINVERTING RESPONSE 0.1 0.05 0.2 -0.1 -0.15 0 Output 0.05 -0.1 -0.15 -0.05 -0.25 -0.1 -0.05 0.1 0 -0.2 -0.05 Output Voltage - V Output 0.05 -0.2 -0.25 -0.1 0.25 s/div" 0.25 s/div" Figure 18. Figure 19. SMALL-SIGNAL NONINVERTING RESPONSE VS = 5 V RL = 2 k 0.05 3.6 0 2.7 0 1.8 -0.9 -0.05 0.1 Output 0.05 -0.1 -0.15 0 Output Voltage - V 0.15 Output Voltage - V 4.5 Input 0.2 1.8 VS = 1.8 V RL = 2 k AV = 1 Input 0.9 Output 0.9 -1.8 0 -2.7 -0.9 -3.6 -0.2 -0.05 -0.25 -0.1 0.25 s/div" Figure 20. 16 LARGE-SIGNAL NONINVERTING RESPONSE 0.1 Input Voltage - V 0.25 0.05 0 0.15 Input Voltage - V -0.05 0.1 Input 0.2 0 0.15 0.1 VS = 2.7 V RL = 2 k Input -1.8 10 s/div" Input Voltage - V VS = 1.8 V RL = 2 k Output Voltage - V 0.25 Input Voltage - V SMALL-SIGNAL NONINVERTING RESPONSE 0.25 -4.5 Figure 21. Copyright (c) 2004-2006, Texas Instruments Incorporated Not Recommended for New Designs www.ti.com LMV932 DUAL, LMV934 QUAD LMV931 SINGLE SLOS441G - AUGUST 2004 - REVISED FEBRUARY 2006 TYPICAL CHARACTERISTICS (continued) VCC+ = 5 V, Single Supply, TA = 25C (unless otherwise specified) LARGE-SIGNAL NONINVERTING RESPONSE VS = 2.7 V RL = 2 k AV = 1 Input 10 0 7.5 -1.35 2.7 Output 1.35 -2.7 0 Output Voltage - V Output Voltage - V 4.05 1.35 Input Voltage - V 5.4 LARGE-SIGNAL NONINVERTING RESPONSE 12.5 2.7 -2.5 Output -5 -7.5 -10 -2.5 -5 -12.5 10 s/div" Figure 22. Figure 23. OFFSET VOLTAGE vs COMMON-MODE RANGE OFFSET VOLTAGE vs COMMON-MODE RANGE 1 1 VS = 1.8 V VS = 2.7 V 0.5 0.5 0 0 -0.5 -0.5 VIO - mV VIO - mV 0 2.5 -6.75 10 s/div" 2.5 0 -5.4 -2.7 Input 5 -4.05 -1.35 5 VS = 5 V RL = 2 k AV = 1 Input Voltage - V 6.75 -1 -1.5 -1.5 -2 -2 125C 85C 25C -40C -2.5 -3 -0.4 -1 0 0.4 -2.5 0.8 1.2 VIC - V Figure 24. Copyright (c) 2004-2006, Texas Instruments Incorporated 1.6 2 2.4 -3 -0.4 125C 85C 25C -40C 0.1 0.6 1.1 1.6 VIC - V 2.1 2.6 3.1 Figure 25. 17 LMV932 DUAL, LMV934 QUAD LMV931 SINGLE Not Recommended for New Designs SLOS441G - AUGUST 2004 - REVISED FEBRUARY 2006 www.ti.com TYPICAL CHARACTERISTICS (continued) VCC+ = 5 V, Single Supply, TA = 25C (unless otherwise specified) OFFSET VOLTAGE vs COMMON-MODE RANGE 1 VS = 5 V 0.5 VIO - mV 0 -0.5 -1 -1.5 -2 -2.5 -3 -0.4 125C 85C 25C -40C 0.6 1.6 2.6 3.6 4.6 5.6 VIC - V Figure 26. 18 Copyright (c) 2004-2006, Texas Instruments Incorporated PACKAGE OPTION ADDENDUM www.ti.com 16-Aug-2012 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp LMV931IDBVR NRND SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LMV931IDBVRE4 NRND SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LMV931IDBVRG4 NRND SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LMV931IDCKR NRND SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LMV931IDCKRE4 NRND SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LMV931IDCKRG4 NRND SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LMV932ID NRND SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LMV932IDE4 NRND SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LMV932IDG4 NRND SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LMV932IDGKR NRND VSSOP DGK 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LMV932IDGKRG4 NRND VSSOP DGK 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LMV932IDR NRND SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LMV932IDRE4 NRND SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LMV932IDRG4 NRND SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LMV934ID NRND SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LMV934IDE4 NRND SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LMV934IDG4 NRND SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Addendum-Page 1 (3) Samples (Requires Login) PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 16-Aug-2012 Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp LMV934IDR NRND SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LMV934IDRE4 NRND SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LMV934IDRG4 NRND SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LMV934IPW NRND TSSOP PW 14 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LMV934IPWE4 NRND TSSOP PW 14 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LMV934IPWG4 NRND TSSOP PW 14 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LMV934IPWR NRND TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LMV934IPWRE4 NRND TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LMV934IPWRG4 NRND TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM (3) Samples (Requires Login) (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Addendum-Page 2 PACKAGE OPTION ADDENDUM www.ti.com 16-Aug-2012 Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. OTHER QUALIFIED VERSIONS OF LMV931, LMV932, LMV934 : * Automotive: LMV931-Q1, LMV932-Q1, LMV934-Q1 NOTE: Qualified Version Definitions: * Automotive - Q100 devices qualified for high-reliability automotive applications targeting zero defects Addendum-Page 3 PACKAGE MATERIALS INFORMATION www.ti.com 16-Aug-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ LMV931IDBVR SOT-23 Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant DBV 5 3000 180.0 9.2 3.17 3.23 1.37 4.0 8.0 Q3 LMV931IDBVR SOT-23 DBV 5 3000 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3 LMV931IDCKR SC70 DCK 5 3000 180.0 9.2 2.3 2.55 1.2 4.0 8.0 Q3 LMV931IDCKR SC70 DCK 5 3000 178.0 9.0 2.4 2.5 1.2 4.0 8.0 Q3 LMV932IDGKR VSSOP DGK 8 2500 330.0 12.4 5.3 3.4 1.4 8.0 12.0 Q1 LMV932IDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 LMV934IDR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 LMV934IPWR TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 16-Aug-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) LMV931IDBVR SOT-23 DBV 5 3000 205.0 200.0 33.0 LMV931IDBVR SOT-23 DBV 5 3000 180.0 180.0 18.0 LMV931IDCKR SC70 DCK 5 3000 205.0 200.0 33.0 LMV931IDCKR SC70 DCK 5 3000 180.0 180.0 18.0 LMV932IDGKR VSSOP DGK 8 2500 358.0 335.0 35.0 LMV932IDR SOIC D 8 2500 340.5 338.1 20.6 LMV934IDR SOIC D 14 2500 367.0 367.0 38.0 LMV934IPWR TSSOP PW 14 2000 367.0 367.0 35.0 Pack Materials-Page 2 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as "components") are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI's terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers' products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers' products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI's goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or "enhanced plastic" are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such components to meet such requirements. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP(R) Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2012, Texas Instruments Incorporated