CLC428 Electrical Characteristics (VCC = ±±
±±
±5V; AV = +2V/V; Rf =100ΩΩ
ΩΩ
Ω; Rg =100ΩΩ
ΩΩ
Ω; RL = 100ΩΩ
ΩΩ
Ω; unless noted)
PARAMETERS CONDITIONS TYP MIN/MAX RATINGS UNITS NOTES
Ambient Temperature CLC428 +25°C +25°C 0 to +70°C -40 to +85°C
FREQUENCY DOMAIN RESPONSE
gain bandwidth product Vout < 0.5Vpp 135 100 80 70 MHz
-3dB bandwidth, Av=+1 Vout < 0.5Vpp 160 120 90 80 MHz
Av=+2 Vout < 0.5Vpp 80 50 40 35 MHz B,1
Vout < 5.0Vpp 40 25 22 20 MHz
gain flatness Vout < 0.5Vpp
peaking DC to 200MHz 0.0 0.6 0.8 1.0 dB B,1
rolloff DC to 20MHz 0.05 0.5 0.7 0.7 dB B,1
linear phase deviation DC to 20MHz 0.2 1.0 1.5 1. 5 °
TIME DOMAIN RESPONSE
rise and fall time 1V step 5.5 7.5 9.0 10.0 ns
settling time 2V step to 0.1% 16 20 24 24 ns
overshoot 1V step 1 5 10 10 %
slew rate 5V step 500 300 275 250 V/µs
DISTORTION AND NOISE RESPONSE
2nd harmonic distortion 1Vpp,10MHz - 62 - 50 - 45 - 43 dBc B
3rd harmonic distortion 1Vpp,10MHz - 72 - 60 - 56 - 56 dBc B
equivalent input noise
voltage 1MHz to 100MHz 2.0 2.5 2.8 2.8 nV/√Hz
current 1MHz to 100MHz 2.0 3.0 3.6 4.6 pA/√Hz
crosstalk input referred, 10MHz - 62 - 58 - 58 - 58 dB
STATIC DC PERFORMANCE
open-loop gain 60 56 50 50 dB
input offset voltage 1.0 2.0 3.0 3.5 mV A
average drift 5 --- 15 20 µV/°C
input bias current 1.5 25 40 65 µAA
average drift 150 --- 600 700 nA/°C
input offset current 0.3 3 5 5 µA
average drift 5 --- 25 50 nA/°C
power supply rejection ratio 66 60 5 5 55 dB B
common-mode rejection ratio 63 57 52 52 dB
supply current per channel, RL= ∞11 12 13 15 mA A
MISCELLANEOUS PERFORMANCE
input resistance common-mode 500 250 125 125 kΩ
differential-mode 200 50 25 25 kΩ
input capacitance common-mode 2.0 3.0 3.0 3.0 pF
differential-mode 2.0 3.0 3.0 3.0 pF
output resistance closed loop 0.05 0.1 0.2 0.2 Ω
output voltage range RL= ∞± 3.8 ± 3.5 ± 3.3 ± 3.3 V
RL=100Ω± 3.5 ± 3.2 ± 2.6 ± 1.3 V
input voltage range common mode ± 3.7 ± 3.5 ± 3 .3 ± 3.3 V
output current ± 80 ± 50 ± 40 ± 20 mA
Min/max ratings are based on product characterization and simulation. Individual parameters are tested as noted. Outgoing quality levels are
determined from tested parameters.
Ordering Information
supply voltage ±7V
short circuit current (note 2)
common-mode input voltage ±Vcc
differential input voltage ±10V
maximum junction temperature +200°C
storage temperature -65°C to+150°C
lead temperature (soldering 10 sec) +300°C
Absolute Maximum Ratings
Model Temperature Range Description
CLC428AJP -40°C to +85°C 8-pin PDIP
CLC428AJE -40°C to +85°C 8-pin SOIC
CLC428ALC -40°C to +85°C dice
CLC428A8B -55°C to +125°C 8-pin CerDIP, MIL-STD-883
CLC428AMC -55°C to +125°C dice, MIL-STD-883
DESC SMD number: 5962-94708
Notes
Package θjc θjA
Plastic (AJP) 75 °/ W 90°/W
Surface Mount (AJE) 90°/W 105°/W
Package Thermal Resistance
A)J-level: spec is 100% tested at +25°C, sample tested at +85°C.
L-level: spec is 100% wafer probed at 25°C.
B)J-level: spec is sample tested at 25°C.
1) Spec is guaranteed at 0.5Vpp but tested at 0.1Vpp.
2) Output is short circuit protected to ground, however maximum
reliability is obtained if output current does not exceed 200mA.
http://www.national.com 2