< Specifications >
Item Specifications
Output Interface Waveguide, CPR137-G (Grooved) with Flange
Output Power @ 1dB G.C.P. +40 dBm min. over temp.
Linear Gain 64 dB nominal
Requirement for External Reference [Frequency] 10 MHz (sine-wave)
[Input Power] -5 to +5 dBm @ Input port
[Phase Noise] -135 dBc/Hz max. @ 100 Hz
-140 dBc/Hz max. @ 1 kHz
-143 dBc/Hz max. @ 10 kHz
L.O. Phase Noise -60 dBc/Hz max. @ 100 Hz
-70 dBc/Hz max. @ 1 kHz
-80 dBc/Hz max. @ 10 kHz
-90 dBc/Hz max. @ 100 kHz
Input V.S.W.R. 2 : 1 max
Output V.S.W.R. 2 : 1 max.
DC Power Requirement Option 1: +48 VDC (+38 to +60 VDC), 130 W max.
Option 2: +24 VDC (+18 to +24 VDC)
Option 3: 110VAC / 220VAC
Mute Shut off the HPA in case of L.O. unlocked
Input Interface N-type, female (50 ohms) [Model No. NJT5662N*****]
F-type, female (75 ohms) [Model No. NJT5662F*****]
Dimension & Housing 275mm (L) x 246mm (W) x 135 mm (H)
[10.8” (L) x 9.7” (W) x 5.3” (H)]
Weight 20 lbs max. [9 kg max.]
Temperature Range (ambient) -40 to +55 C (operating)
-40 to +75 C (storage)
NJT5662 N 0 1 1 0 0
1st Digit 2nd Digit 3rd Digit 4th Digit 5th Digit 6th Digit
IF connector Operating Voltage
Range
Port for Voltage
Input
LED M&C Other fuctions
N N-connector 0 DC: +38 to +60V
(+48V)
0 Same as
IF signal
0 Not
equipped
0 Not
equipped
0 Not
equipped
F F-connector 1 DC: +24V 1 MS connector 1 Equipped 1 *Power Monitor
*Output power
On/off
*Fault Indicator
1 With
mounting
cradle
2 DC: +12V 2 TNC connector
3 Negative Voltage
(TBD)
4 AC
Copyright © 2003 New Japan Radio Co., Ltd. Rev.01 C/XC 10W BUC_NJT5662/62F/63/63F