commercial Switches and Sensors Pressure Mass airflow Force Product solutions on the Interactive Catalogue Humidity Temperature Position Infrared Current Liquid level Basic switches September 2002 INTRODUCTION COMMERCIAL SWITCHES AND SENSORS Honeywell's Commercial Switches and Sensors offer a wide selection of products and technology capability for applications in medical devices and equipment; heating, ventilation, air-conditioning and refrigeration; information technology; home appliances; motor control and automotive passenger cars. This catalogue contains a selection of our most popular, established product listings - all tried and tested in field applications. To view our complete range of products, visit our website at www.honeywell.com/sensing. How to use this catalogue System critical sensing solutions For each referenced listing, key specification parameters, descriptions and mounting drawing information are presented. These listings illustrate our capabilities while the specifications included allow easy differentiation between similar products. A system is critical if the quality, reliability, delivery and customer service associated with a component part is essential to the performance of the operation or end product. If a sensor or switch is critical to the performance, cost effectiveness, delivery or safety of a product or operation, then it is system critical. It is therefore a defining element in the performance of the system under whatever conditions apply. Failure of the component - or failure of delivery of the component - results in lost productivity, increased costs or a catastrophic event such as a shutdown. Therefore selecting the right product is essential. It can make the difference between success and failure. There are, of course, many more product options available. Full product specification information may be accessed on our website (www.honeywell.com/sensing). At the Home page enter the catalogue listing reference in the SEARCH box and click GO! This will take you directly to the interactive catalogue/specification search tables for this listing. Alternatively, select and click the interactive catalogue icon on the Home page and then choose a product category against which to do a specification search. Also on the website you can access installation instructions, application notes, Frequently Asked Questions (FAQs), selection guides and additional technical information. Honeywell - delivering excellence To deliver the right products for our customers' applications we listen to them to understand their needs. Using techniques such as "Voice of the Customer" and "Concept Engineering" we make sure that the products and solutions we deliver are the right ones. As part of Honeywell we can use local knowledge and understanding combined with global expertise and resources to achieve this. We can deploy many key technologies to bring innovative solutions to customers' problems. Mounting dimensions Mounting dimensions shown in each product section are for reference only. For exacting layout work, request an engineering drawing from your nearest Honeywell sales office. Where dual dimensions are shown on mounting drawings, the first or upper one is millimetres (mm) and the second or lower is inches (in). Where single dimensions are shown, they are millimetres (mm), unless otherwise stated. To order these products Simply contact your local Honeywell Distributor or your local Honeywell office. More information on Honeywell products and how to contact us can be found at http://locator.micro.honeywell.com/ Our products are manufactured to work well and to last. We use Six Sigma Plus productivity to ensure this is the case. We have award winning manufacturing facilities around the world and recognised world class business excellence in manufacturing and supply chain management to deliver on time, anywhere in the world. Our e-business approach offers instant access to product information, technical support and application knowledge through our Internet site. Check out our powerful new interactive catalogue that can search and find the right products for customers' needs and deliver a drawing ready for incorporation in a CAD system direct to your desk. And of course, we manage our whole business for the benefit of our customers, using an acknowledged world-class business excellence approach that incorporates Six Sigma principles. 2 www.honeywell.com/sensing INDEX CONTENTS Pressure Sensors Page 4 Absolute, differential, gauge, and vacuum gauge pressure sensors for media that are compatible with a silicon diaphragm. These sensors are ideal for lowcost commercial grade applications, such as printed circuit boards. Small and reliable, they offer excellent repeatability and high accuracy under varying environmental conditions. Mass Airflow Sensors Page 10 Amplified and unamplified microbridge mass airflow sensors provide a sensitive and fast response and high accuracy over a broad range of gas and air flows. Force Sensors Page 12 Compact, extremely sensitive devices for precise, reliable performance in any application that requires precision force measurement. Humidity Sensors Page 13 Relative humidity sensors with on-chip signal conditioning. Chemically resistant packaging to accommodate harsh environments. Sensor construction consists of a planar capacitor with a second polymer layer to protect against dirt, dust, oils and other hazards. Temperature Sensors Page 14 Platinum and silicon-based thin film resistance temperature devices (RTDs) for applications that require small package size, accuracy and linear outputs. Position Sensors WARNING ! PERSONAL INJURY DO NOT USE these products as safety or emergency stop devices, or in any other application where failure of the product could result in personal injury Failure to comply with these instructions could result in death or serious injury. Hall effect and magnetoresistive sensors for all applications that require accurate, reliable outputs. Infrared Products Page 20 Optoelectronic standard infrared emitting diodes (IREDs), sensors and assemblies for object presence, limit and motion sensing, position encoding and movement encoding. Current Sensors WARNING ! MISUSE OF DOCUMENTATION * The information presented in this product sheet (or catalogue) is for reference only. DO NOT USE this document as product installation information. * Complete installation, operation and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. Page 16 Page 26 Adjustable linear null balance, digital and linear output current sensors for monitoring ac or dc current. Liquid Level Sensors Page 30 Sensitive sensors in a variety of housing types for detecting the presence or absence of a wide range of liquids. Basic Switches Page 31 Standard, miniature and subminiature switches, available in a range of enclosures and with a variety of actuators. They are ideal for use alone or built into assemblies. www.honeywell.com/sensing 3 PRESSURE Pressure Sensors Honeywell pressure sensors are small, low cost and reliable. They feature excellent repeatability, high accuracy, and reliability under varying environmental conditions. In addition, they feature highly consistent operating characteristics from one sensor to the next and interchangeability without recalibration. We offer three pressure sensor measurement types--absolute, differential and gauge--including vacuum gauge and bidirectional types. A wide variety of pressure ranges, along with both amplified and unamplified versions, are available. Honeywell pressure sensors are best used in applications which require precision pressure measurement. 24PC/26PC Series Signal conditioning: Unamplified noncompensated- (24PC Series) compensated - (26 PC Series) Supply voltage: 10 Vdc typ. 12 Vdc max. (24PC Series) 16 Vdc max. (26PC Series) Operating temperature: -40 C to 85 C -40 F to 185 F Port style: Straight or Flow Through Termination: PCB; 1 x 4; 0.600 in (Type 6) PCB; 2 x 2; (Type 2) 1 x 4 with connector (Type 5) Gauge Flow Through Type 6 MOUNTING DIMENSIONS (for reference only) mm/in GAUGE SENSOR 1 x 4 Termination (Style 6) Port Style A, Straight Pin 1 is notched, Pin 2 is next to Pin 1, etc. OPTIONS Differential MOUNTING DIMENSIONS (for reference only) mm/in DIFFERENTIAL SENSOR 1 X 4 Termination (Style 6) Port Style A, Straight (Only) 24PC Series MEASUREMENT TYPE Gauge/Vacuum Gauge PRESSURE RANGE 1.0 psi REFERENCE 24PCAFA6G Differential/Vacuum Gauge Gauge/Vacuum Gauge 5.0 psi 5.0 psi 24PCBFA6D 24PCBFA6G Differential/Vacuum Gauge Gauge/Vacuum Gauge 15.0 psi 15.0 psi 24PCCFA6D 24PCCFA6G Differential/Vacuum Gauge Gauge/Vacuum Gauge 30.0 psi 30.0 psi 24PCDFA6D 24PCDFA6G Differential Gauge 0.5 psi 0.5 psi 24PCEFA6D 24PCEFA6G Differential Gauge 100 psi 100 psi 24PCFFA6D 24PCFFA6G MEASUREMENT TYPE Differential/Vacuum Gauge Gauge/Vacuum Gauge PRESSURE RANGE 1.0 psi 1.0 psi REFERENCE 26PCAFA6D 26PCAFA6G Differential Gauge 5.0 psi 5.0 psi 26PCBFA6D 26PCBFA6G Differential/Vacuum Gauge Gauge/Vacuum Gauge 15.0 psi 15.0 psi 26PCCFA6D 26PCCFA6G Differential Gauge 30.0 psi 30.0 psi 26PCDFA6D 26PCDFA6G 26PC Series 4 Gauge 100 psi 26PCFFA6G Differential 250 psi 26PCGFA6D www.honeywell.com/sensing 24PC Series MEASUREMENT TYPE PRESSURE RANGE Flow Through/Vacuum Gauge 15.0 psi REFERENCE 24PCCFG6G Flow Through/Vacuum Gauge 30.0 psi 24PCDFG6G 26PC Series MEASUREMENT TYPE PRESSURE RANGE Flow Through/Vacuum Gauge 1.0 psi REFERENCE 26PCAFG6G Flow Through 15.0 psi 26PCCFG6G Gauge/Vacuum Gauge 100 psi 26PCFFG6G PRESSURE 24PC/26PC Series (Continued) 24PC/26PC SMT (Surface Mount Technology) CPC/CPX Series Low Pressure Type 2 Signal conditioning: Unamplified noncompensated- (24PC SMT Series) compensated - (26 PC SMT Series) Supply voltage: 10 Vdc typ. 12 Vdc max. (24PC SMT Series) 16 Vdc max. (26PC SMT Series) Operating temperature: -40 C to 85 C -40 F to 185 F Port style: Straight, 1,88 mm O (0.74 in) Termination: SMT solder Measurement type: Gauge, Vacuum Gauge, Differential, Wet/Wet Differential Signal conditioning: OPTIONS 26PC Series MEASUREMENT TYPE Flow Through Unamplified compensated - (CPC Series) noncompensated - (CPX Series) Supply voltage: 12 Vdc typ. 16 Vdc max. Operating temperature: -25 C to 85 C -13 F to 185 F Port style: Barbed Termination: PCB Accuracy grade: Commercial (1.0 %) PRESSURE RANGE 30.0 psi CPC Series REFERENCE 26PCDFG2G Type 5 MEASUREMENT TYPE Differential Gauge PRESSURE RANGE (1.0 psi) 4.0 in H2O (1.0 psi) 4.0 in H2O REFERENCE CPCL04DFC CPCL04GFC Differential (1.0 psi) 10.0 in H2O CPCL10DFC OPTIONS CPX Series 24PC SMT Series MEASUREMENT TYPE Differential PRESSURE RANGE 4.0 in H2O REFERENCE CPXL04DF Differential 10.0 in H2O CPCL10DF PRESSURE RANGE 0 psi to 1.0 psi REFERENCE 24PC01SMT 0 psi to 5.0 psi 24PC05SMT 0 psi to 15.0 psi 24PC15SMT 26PC SMT Series 26PC Series MEASUREMENT TYPE PRESSURE RANGE Flow Through/Vacuum Gauge 100 psi REFERENCE 26PCFFU5G PRESSURE RANGE 0 psi to 1.0 psi REFERENCE 26PC01SMT 0 psi to 5.0 psi 26PC05SMT 0 psi to 15.0 psi 26PC15SMT www.honeywell.com/sensing 5 PRESSURE DC Series, Low Pressure DCXL/DUXL Series, Low Pressure Signal conditioning: Signal conditioning: Supply voltage: Operating temperature: Port style: Termination: Amplified compensated unregulated (DC001NDC4) regulated (DC005NDR4) 5 Vdc typ., 5.1 Vdc max. (DC001NDC4) 7 Vdc to 35 Vdc (DC005NDR4) -25 C to 85 C -13 F to 185 F Barbed PCB Supply voltage: Operating temperature: Port style: Termination: OPTIONS OPTIONS DC001NDC4 DCXL Series MEASUREMENT TYPE Differential PRESSURE RANGE 1.0 in H2O REFERENCE DC001NDC4 DC005NDR4 MEASUREMENT TYPE Differential 6 Unamplified compensated (DCXL) noncompensated (DUXL) 12 Vdc typ., 16 Vdc max. (DCXL) 4.5 Vdc min., 8 Vdc max. (DUXL) -25 C to 85 C -13 F to 185 F Barbed PCB MEASUREMENT TYPE Differential PRESSURE RANGE 1.0 in H2O REFERENCE DCXL01DN Differential 10.0 in H2O DCXL10DN MEASUREMENT TYPE Differential PRESSURE RANGE 1.0 in H2O REFERENCE DUXL01D Differential 10.0 in H2O DUXL10D DUXL Series PRESSURE RANGE 5.0 in H2O REFERENCE DC005NDR4 www.honeywell.com/sensing PRESSURE XCA Series XPC Series Signal conditioning: Supply voltage: Operating temperature: Unamplified compensated 5 Vdc typ., 16 Vdc max. -25 C to 85 C -13 F to 185 F Barbed PCB Port style: Termination: MEASUREMENT TYPE Absolute PRESSURE RANGE 15.0 psia Signal conditioning: Supply voltage: Operating temperature: Unamplified compensated 12 Vdc typ., 16 Vdc max. -25 C to 85 C -13 F to 185 F Barbed PCB Commercial (1.0 %) Port style: Termination: Accuracy grade: REFERENCE XCA415AN XCX Series Signal conditioning: Supply voltage: Operating temperature: Unamplified compensated 12 Vdc typ., 16 Vdc max. -25 C to 85 C -13 F to 185 F Barbed PCB Commercial (1.0 %) Port style: Termination: Accuracy grade: MEASUREMENT TYPE Differential Differential PRESSURE RANGE 1.0 psi 1.0 psi Differential 15.0 psi ACCURACY GRADE High (0.50 %) MEASUREMENT TYPE Differential PRESSURE RANGE 1.0 psi PORT STYLE Axial REFERENCE XPC01DFC Differential 15.0 psi Radial XPC15DTC REFERENCE XCX01DNC XCX01DNH XCX15DNC www.honeywell.com/sensing 7 PRESSURE XSX Series, Low pressure Signal conditioning: Unamplified uncompensated 12 Vdc typ., 16 Vdc max. -25 C to 85 C -13 F to 185 F Button PCB Commercial (1.0 %) Supply voltage: Operating temperature: Port style: Termination: Accuracy grade: MEASUREMENT TYPE Gauge 8 40PC Series, Miniature Signal Conditioned PRESSURE RANGE 4.0 in H2O REFERENCE XSXL04GF Signal conditioning: Supply voltage: Operating temperature: Amplified 5 Vdc 0.25 Vdc -45 C to 125 C -49 F to 257 F Straight for O-ring interface PCB, unformed Port style: Termination: MEASUREMENT TYPE PRESSURE RANGE REFERENCE Bi-Directional Gauge/Vacuum Gauge 50 mm Hg 40PC001B1A Gauge 0 to 300 mm HG 40PC006G1A Vacuum 0 to -15.0 psi 40PC015V1A Gauge 15.0 psi 40PC015G1A Gauge 30.0 psi 40PC030G1A Gauge 100 psi 40PC100G1A Gauge 150 psi 40PC150G1A Gauge 250 psi 40PC250G1A Gauge 500 psi 40PC500G1A www.honeywell.com/sensing PRESSURE 140PC Series 160PC Series, Low Pressure Signal conditioning: Supply voltage: Operating temperature: Amplified 8 Vdc typ., 16 Vdc max. -40 C to 85 C -40 F to 185 F Straight PCB Port style: Termination: Signal conditioning: Supply voltage: Operating temperature: Amplified 8 Vdc typ., 16 Vdc max. -40 C to 85 C -40 F to 185 F Straight PCB Port style: Termination: Note: Dimensions shown apply to Differential and Absolute versions. Gauge units are identical, except the P1 port is absent. Note: Dimensions shown apply to Differential and Absolute versions. Gauge units are identical, except the P1 port is absent. MEASUREMENT TYPE Gauge/Vacuum Gauge PRESSURE RANGE -15 psi MEASUREMENT TYPE Differential/Vacuum Gauge PRESSURE RANGE 0 to 27.68 in H2O Differential/Vacuum Gauge Gauge 1.0 psi 1.0 psi 142PC01D 142PC01G Differential/Vacuum Gauge 5.0 in H2O Gauge 2.0 psi 142PC02G Differential/Vacuum Gauge Differential/Vacuum Gauge -20 cm to 120 cm H2O -20 cm to 120 cm H2O Differential/Vacuum Gauge Differential/Vacuum Gauge Gauge 5.0 psi -39 in H2O to 55 in H2O 5.0 psi 142PC05D 142PC05D97 142PC05G Differential/Vacuum Gauge 2,5 in H2O 163PC01D75 Differential/Vacuum Gauge 10.0 in H2O 164PC01D37 Absolute Absolute Gauge 15 psia 15 psia 15 psi 142PC15A 142PC15AW95 142PC15G Differential/Vacuum Gauge 5,0 in H2O 164PC01D76 Differential/Vacuum Gauge 2.5 psi Differential/Vacuum Gauge 5.0 psi TERMINATION REFERENCE 141PC15G Leadwire SUPPLY VOLTAGE REFERENCE 162PC01D 163PC01D36 5 Vdc 163PC01D48 163PC01D61 143PC03D Leadwire 143PC05DW www.honeywell.com/sensing 9 MASS AIRFLOW Mass Airflow sensors contain a thin-film, thermally isolated bridge structure containing heater and temperature sensing elements. The bridge structure provides a sensitive and fast response to the flow of air or other gas over the chip. Mass Airflow Sensors State-of-the-art chip design and manufacturing techniques allow the microbridge to be remarkably sensitive, fast, small. Used wherever airflow needs to be measured. Supply voltage: Operating temperature: Media compatibility: 8 Vdc to 15 Vdc -25 C to 85 C (-13 F to 185 F) Dry gas only AWM2000 Series AWM3000 Series AWM40000 Series The AWM2000 Series microbridge mass airflow sensor is a passive device comprised of two Wheatstone bridges and has bidirectional sensing capability. The heater control circuit is required for operation per specifications. The sensing bridge supply circuit is also required for operation per specifications. These two circuits are not on board the package and must be supplied in the application. The differential amplifier is a useful interface for the sensing bridge. It can be used to introduce gain and to voltage offsets to the sensor output. Like the AWM2000 Series, the dual Wheatstone bridges control airflow measurement. The AWM3000 Series is amplified; therefore, it can be used to increase the gain and to introduce voltage offsets to the sensor output. The heater control circuit and the sensing bridge supply circuit are on board the package. The microbridge mass airflow sensor operates on the theory of heat transfer. Mass airflow is directed across the surface of the sensing elements. Output voltage varies in proportion to the mass air or other gas flow through the inlet and outlet ports of the package. The specially designed housing precisely directs and controls the airflow across the microstructure sensing element. Mechanical design of the package allows it to be easily mounted to printed circuit boards. Signal conditioning: Port style: Amplified (1 Vdc to 5 Vdc) Straight The microbridge mass airflow sensor has a unique silicon chip based on advanced microstructure technology. It consists of a thin-film, thermally isolated bridge structure containing heater and temperature sensing elements. The bridge structure provides a sensitive and fast response to the flow of air or other gas over the chip. Dual sensing elements positioned on both sides of a central heating element indicate flow direction as well as flow rate. Laser trimmed thick film and thin film resistors provide consistent interchangeability from one device to the next. Signal conditioning: Unamplified (-44,5 mVdc to 44,5 mVdc) Port style: Straight Sensor resistance: 5 kOhm Port style: FLOW/PRESSURE RANGE 200 sccm + 2.0 in H20 (5 mBar) 1000 sccm (1 SLPM) FLOW/PRESSURE RANGE 200 sccm 4.0 in H2O (10 mBar) 1000 sccm (1 SLPM) REFERENCE AWM3100V AWM3200V AWM3300V REFERENCE AWM2100V AWM2200V AWM2300V SIGNAL CONDITIONING Unamplified (8.5 mV) Unamplified (54.7 mV) Amplified (1 Vdc to 5 Vdc) Amplified (1 Vdc to 5 Vdc) 10 Manifold www.honeywell.com/sensing FLOW/ REFERENCE PRESSURE RANGE 25 sccm AWM42150VH 1000 sccm (1 SLPM) AWM42300V 1000 sccm (1 SLPM) AWM43300V + 6 SLPM AWM43600V MASS AIRFLOW AWM5000 Series - High flow AWM5000 Series Microbridge Mass Airflow Sensors feature a Venturi type flow housing. They measure flow as high as 20 standard liters per minute (SLPM) while inducing a maximum pressure drop of 2.25 inches H2O. The microbridge chip is in direct contact with the flow stream, greatly reducing error possibilities due to orifice or bypass channel clogging. The rugged plastic package has been designed to withstand common mode pressures up to 50 psi, and the small sensing element allows 100 g of shock without compromising performance. The included "AMP" compatible connector provides reliable connection in demanding applications. Each AWM5000 sensor contains circuitry which performs amplification, linearization, temperature compensation, and gas calibration. A 1 to 5 Vdc linear output is possible for all listings regardless of flow range (5, 10, 15, or 20 SLPM) or calibration gas (nitrogen, carbon dioxide, nitrous oxide, or argon). All calibration is performed by active laser. Signal conditioning: Port style: FLOW/PRESSURE RANGE 0 SLPM to 5 SLPM (N2 calibration) 0 SLPM TO 10 SLPM (N2 calibration) 0 SLPM to 20 SLPM (CO2 calibration) 0 SLPM to 20 SLPM (N2 calibration) Amplified (1 Vdc to 5 Vdc) Threaded, 1/4 NPT REFERENCE AWM5101VN AWM5102VN AWM5104VC AWM5104VN AWM700 Series AWM700 Series microbridge mass airflow sensors provide in-line flow measurement with a specially designed bypass flow housing. The sensors measure flow as high as 200 standard liters per minute (SLPM) while inducing a pressure drop of 1 inch H2O, typically. The AWM700 has a high flow range capability in a small package. Signal conditioning: Port style: Amplified (1 Vdc to 5 Vdc) Tapered, 22 mm CAUTION PRODUCT DAMAGE AWM Series Microbridge Mass Airflow Sensors are not designed to sense liquid flow and will be damaged by liquid flow through the sensor. FLOW/PRESSURE RANGE + 200 SLPM REFERENCE AWM720P1 www.honeywell.com/sensing Failure to comply with these instructions could result in product damage. 11 FORCE Force Sensors Force sensors operate on the principle that the resistance of silicon implanted piezoresistors will increase when the resistors flex under any applied force. The sensor concentrates force from the application, through the stainless steel plunger, directly to the silicon sensing element. The amount of resistance changes in proportion to the amount of force being applied. This change in circuit resistance results in a corresponding mV output level. FSG Series FSL Series Plunger actuator - Force range 1500 g Ball bearing actuator - Force range 500 g Supply voltage: Operating temperature: Supply voltage: Operating temperature: Sensitivity: Overforce: Non-compensated 12 360 mV span @ 10 Vdc -40 C to 85 C -40 F to 185 F 0.20 mV/g min., 0.24 mV/g typ., 0.28 mV/g max. 5500 g REFERENCE FSG15N1A Sensitivity: Overforce: Non-compensated www.honeywell.com/sensing 60 mV span @ 5 Vdc -40 C to 85 C -40 F to 185 F 0.10 mV/g min., 0.12 mV/g typ., 0.14 mV/g max. 4500 g REFERENCE FSL05N2C HUMIDITY Relative Humidity/Temperature and Relative Humidity sensors are configured with integrated circuitry to provide onchip signal conditioning. These sensors contain a capacitive sensing die set in thermoset polymers that interacts with platinum electrodes. The laser trimmed sensors have an interchangeability of + 5%RH, with stable, low drift performance. Humidity Sensors Absorption based humidity sensors provide both temperature and %RH (Relative Humidity) outputs. On-chip signal processing ensures linear voltage output versus %RH. Sensor laser trimming offers + 5%RH accuracy, and achieves 2%RH accuracy with calibration. Packages are chemically resistant and operate in ranges of -40 C to 85 C (-40 F to 185 F) to accommodate harsh environments. Supply voltage: Operating humidity range: Operating temperature range: 4.0 Vdc to 5.8 Vdc 0 to 100% RH, non-condensing -40 C to 85 C (-40 F to 185 F) HIH Series OPTIONS HIH-3610 Monolithic integrated circuit HIH-3602 Monolithic integrated circuit The HIH-3610 humidity sensor is designed specifically for high volume OEM (Original Equipment Manufacturer) users. Direct input to a controller or other device is made possible by this sensor's linear voltage output. With a typical current draw of only 200 A, the HIH-3610 is ideally suited for low drain, battery powered systems. Tight sensor interchangeability reduces or eliminates OEM production calibration costs. Individual sensor calibration data is available. HIH-3602-A and HIH-3602-C Relative Humidity (RH) sensors combine both relative humidity and temperature sensing in a TO-5 housing with a hydrophobic sintered stainless steel filter. The HIH-3610 delivers instrumentation quality RH sensing performance in a low cost, solderable SIP (Single In-line Package). Available in two lead spacing configurations, the RH sensor is a laser trimmed thermoset polymer capacitive sensing element with on-chip integrated signal conditioning. Package style: The temperature sensor is thermally connected with the RH sensor making the HIH-3602-A/C ideal for measuring dew point and other absolute moisture terms. Package style: Termination: Nist Certification: TO-5 can 0,46 mm (0.18 in) NIST Calibration sensor-specific printout Solderable SIP 4,27 (0.168) 4,27 (0.168) 9,47 (0.373) 9,47 (0.373) 1,90 (0.075) 12,19 MIN (0.480) 12,70 MIN (0.50) OUT + 1,27 (0.050) 3X 0,38 (0.015) 2,03 (0.080) 2,54 (0.100) OUT TEMPERATURE SENSOR 100 kOhm 5 % @ 25 C, NTC 0-50 C 1000 Ohm 0.2 % @ 0 C, platinum RTD + 3X 0,38 (0.015) 5,08 (0.200) REFERENCE HIH-3602-A HIH-3602-C HIH-3602-L Integrated circuit 2,54 (0.100) The HIH-3602-L Relative Humidity (RH) sensor delivers instrumentation quality RH sensing performance in a rugged, low cost, slotted TO-39 housing. TERMINATION 2,54 mm (0.100 in) Lead Pitch 1,27 mm (0.050 in) Lead Pitch 2,54 mm (0.100 in) Lead Pitch 1,27 mm (0.050 in) Lead Pitch NIST CERTIFICATION None None NIST Calibration sensor-specific printout NIST Calibration sensor-specific printout REFERENCE HIH-3610-001 HIH-3610-002 HIH-3610-003 HIH-3610-004 On-board signal conditioning reduces product development times while a typical current draw of only 200 mA makes the HIH-3602-L perfect for battery powered systems. This sensor should be shielded from bright light. Package style: Termination: Nist Certification: T0-39 can 0,46 mm (0.18 in) None CAUTION PRODUCT DAMAGE The inherent design of this component causes it to be sensitive to the electrostatic discharge (ESD). To prevent ESD-induced damage and/or degradation, take normal ESD precautions when handling this product. Failure to comply with these instructions could result in product damage www.honeywell.com/sensing REFERENCE HIH-3602-L 13 TEMPERATURE Temperature Sensors Honeywell temperature sensors feature two distinct series.These sensors are thin film RTDs (Resistance Temperature Detectors) and are laser trimmed for accuracy and interchangeability. Linear outputs are stable and fast. The TD Series Temperature Sensors are silicon-based RTDs. They offer 2000 Ohm nominal resistance at 20 C Temperature range of -40 C to 150 C. The HEL Series Temperature Sensors are platinum RTDs, offering 100 Ohm or 1000 Ohm versions and temperature ranges of -200 C to 540 C. HEL-700 Series 100/1000 Ohm platinum RTD Supply voltage: Base resistance and interchangeability: 4 Vdc to 9 Vdc 1000 2 Ohm ( 0.2 %) @ 0 C (Standard) 1000 1 Ohm ( 0.1 %) @ 0 C (Optional) OPTIONS HEL-700 Temperature range: Packaging style/Termination: Type A -200 C to 540 C -300 F to 1000 F Radial chip/ribbon leads (Type A) Radial chip/no leads (Type B) SMT (Axial) flip chip/no leads (Type C) 100 Ohm (0.00385 Ohm/Ohm/C DIN standard) PACKAGING STYLE Type A Type A BASE RESISTANCE AND INTERCHANGEABILITY Standard Optional REFERENCE HEL-700-T-0-A HEL-700-T-1-A Type B Type B Standard Optional HEL-700-T-0-B HEL-700-T-1-B 1000 Ohm (0.00375 Ohm/Ohm/C) PACKAGING STYLE Type A Type A BASE RESISTANCE AND INTERCHANGEABILITY Standard Optional REFERENCE HEL-700-U-0-A HEL-700-U-1-A Type B Type B Standard Optional HEL-700-U-0-B HEL-700-U-1-B Type C Type C Standard Optional HEL-700-U-0-C HEL-700-U-1-C Type B Type C Centre lead not connected CAUTION PRODUCT DAMAGE The inherent design of this component causes it to be sensitive to the electrostatic discharge (ESD). To prevent ESD-induced damage and/or degradation, take normal ESD precautions when handling this product. Failure to comply with these instructions could result in product damage 14 www.honeywell.com/sensing TEMPERATURE HEL-700 Series 100/1000 Ohm platinum RTD (Continued) TD Series 2000 Ohm silicon RTD HEL-705/707/711/712/716/717 Supply voltage: Temperature range: Temperature range: HEL-705/711/716 HEL-707/712/717 Packaging style: Termination: NIST calibration: -200 C to 260 C -320 F to 500 F -75 C to 540 C -100 F to 1000 F Ceramic case 12 in leadwires None 10 Vdc -40 C to 150 C -40 F to 302 F OPTIONS TD4A Liquid temperature sensor PACKAGING STYLE Threaded aluminium case TERMINATION Leadwires REFERENCE TD4A TD5A Subminiature temperature sensor 100 Ohm (0.00385 Ohm/Ohm/C DIN standard) BASE RESISTANCE AND INTERCHANGEABILITY Standard Optional REFERENCE HEL-705-T-0-12-00 HEL-705-T-1-12-00 Standard Optional HEL-707-T-0-12-00 HEL-707-T-1-12-00 Standard Optional HEL-711-T-0-12-00 HEL-711-T-1-12-00 Standard Optional HEL-712-T-0-12-00 HEL-712-T-1-12-00 Standard Optional HEL-716-T-0-12-00 HEL-716-T-1-12-00 Standard Optional HEL-717-T-0-12-00 HEL-717-T-1-12-00 PACKAGING STYLE Plastic case TERMINATION SIP REFERENCE TD5A 1000 Ohm (0.00375 Ohm/Ohm/C) BASE RESISTANCE AND INTERCHANGEABILITY Standard Optional NIST CALIBRATION REFERENCE HEL-705-U-0-12-00 HEL-705-U-1-12-00 Standard Optional HEL-707-U-0-12-00 HEL-707-U-1-12-00 Standard Optional HEL-711-U-0-12-00 HEL-711-U-1-12-00 Standard Optional HEL-712-U-0-12-00 HEL-712-U-1-12-00 Standard Optional Optional HEL-716-U-0-12-00 HEL-716-U-1-12-00 HEL-716-U-1-12-C2 Standard Optional NIST @ 0 and 100 C HEL-717-U-0-12-00 HEL-717-U-1-12-00 www.honeywell.com/sensing 15 POSITION Position Sensors Honeywell's Solid State Position Sensor family includes digital and analog Hall-effect position sensors, magnetoresistive digital sensors, Hall-effect vane sensors, gear tooth sensors, Hall-effect basic switches, and magnets. Solid State Position Sensors are reliable, high speed, long life, sensors and are directly compatible with other electronic circuits. Position sensors are used in applications which require accurate, reliable outputs. They are found in brushless dc motors, utility meters, welding equipment, vending machines, home appliances, computers, etc. Unipolar - temperature compensated SS40/400 Series Hall effect digital position sensor SS400 Series position sensors have a thermally balanced integrated circuit over full temperature range. The negative compensation slope is optimized to match the negative temperature coefficient of lower cost magnets. Bipolar, latching and unipolar magnetics are available. Band gap regulation provides extremely stable operation over 3.8 Vdc to 30 Vdc supply voltage range. Package style: Supply voltage: Operating temperature: OPERATING POINT (MAXIMUM) 115 Gauss 180 Gauss 390 Gauss RELEASE POINT (MINIMUM) 20 Gauss 75 Gauss 235 Gauss REFERENCE SS441A SS443A SS449A Bipolar latching- temperature compensated OPERATING POINT (MAXIMUM) 85 Gauss 180 Gauss RELEASE POINT (MINIMUM) -85 Gauss -180 Gauss SS49/490 Series Ratiometric hall effect linear position sensor Package style: Supply voltage: Operating temperature: Radial lead IC 4.5 to 10.5 Vdc -40 C to 150 C -40 F to 302 F -670 to 670 Gauss Magnetic range: REFERENCE OPTIONS SS461A SS466A Temperature compensated Gate Radial lead IC 3.8 Vdc to 30 Vdc -40 C to 150 C -40 F to 302 F 2X 3 2X 48 2,54 0.10 3 (2) 4,06 0.16 48 (2) 1 1,75 0.07 2,5 0.10 3,0 1.12 4,1 0.16 Hall element centre 15,0 0.59 3,0 0.12 1,7 0.07 2x 0,43 (3) 0.017 0,38 (3) 0.015 _ 1,3 (2) 0.05 0,76 0.03 MAX + - 0 14,99 0.59 0 + 3x 1,3 0.05 3 x 0,7 MAX 0.025 0,4 3x 0.015 3,2 0.125 OPTIONS + - 0 MAXIMUM Operating Point and MINIMUM Release Point are specified @ 25 C Bipolar - temperature compensated OPERATING POINT (MAXIMUM) 60 Gauss 140 Gauss RELEASE POINT (MINIMUM) -60 Gauss -140 Gauss PACKAGE STYLE High accuracy High accuracy REFERENCE SS411A SS413A Bipolar - non temperature compensated Supply voltage: Operating temperature: OPERATING POINT (MAXIMUM) 150 Gauss 16 RELEASE POINT (MINIMUM) -140 Gauss 4.5 to 24 Vdc -55 C to 150 C -67 F to 302 F REFERENCE SS41 www.honeywell.com/sensing Surface mount Surface mount reel REFERENCE SS495A SS495A1 SS495A1-S SS495A-SP POSITION SS49/490 Series Ratiometric hall effect linear position sensor (Continued) SS500 Series Hall effect digital position sensor Non temperature compensated GATE SS94 Series Ratiometric hall effect linear position sensor Package style: Supply voltage: Operating temperature: Surface mount 3.8 to 30 Vdc -40 C to 150 C -40 F to 302 F 2 X 3 2 2 X 48 2 NOMINAL ( PACKAGE ( HALL ELEMENT 2,54 0.10 .067 4,1 0.16 .005 MAX FLASH CATALOG LISTING 3,0 0.12 2,03 0.08 1,75 0.07 .164 .003 DATE CODE (+) 0,43 3x 0.017 _ Package style: Supply voltage: Operating temperature: Magnetic range: SS94A1F Ceramic 6.6 Vdc to 12.6 Vdc -40 C to 125 C -40 F to 257 F -500 to 500 Gauss -100 to 100 Gauss MAX (-) (0) .005 MAX (0) + The SS9 utilizes a Hall effect integrated circuit chip which provides increased temperature stability and performance. Laser trimmed thick film resistors on the ceramic substrate and thin film resistors on the integrated circuit reduce null and gain shifts over temperature which results in consistent sensitivity from one device to the next. 2X .059 .002 0,38 3 x 0.015 6 3X .016 .173 2 x 1,27 0.05 3 3,17 0.125 - + N S 0 Supply voltage: Operating temperature: 4 to 10 Vdc -25 C to 85 C -13 F to 185 F -1000 to 1000 Gauss Magnetic range: REFERENCE SS49 Miniature Ratiometric hall effect linear position sensor .177 .004 OPTIONS MAXIMUM Operating Point and MINIMUM Release Point are specified @ 25 C Bipolar - temperature compensated SS490 Series MRL (Miniature Ratiometric Linear) sensors have a ratiometric output voltage, set by the supply voltage. It varies in proportion to the strength of the magnetic field. OPERATING POINT (MAXIMUM) 60 Gauss 140 Gauss Temperature compensated Bipolar - non temperature compensated Gate 2X 3 2X 48 2,54 0.10 RELEASE POINT (MINIMUM) -60 Gauss -140 Gauss Supply voltage: OPERATING POINT (MAXIMUM) 140 Gauss REFERENCE SS511AT SS513AT OPTIONS Temperature compensated MAIN FEATURE General purpose High sensitivity (25 mV/Gauss output @ 8 Vdc supply) Noise shielded REFERENCE SS94A1 SS94A1F SS94A2 4,5 to 24 Vdc RELEASE POINT (MINIMUM) -140 Gauss REFERENCE SS51T 4,06 0.16 1 1,75 0.07 3,0 1.12 0,76 3x 0.03 MAX 2x 15,0 0.59 + - 0 1,3 0.05 3 x 0,7 MAX 0.025 0,4 3x 0.015 OPERATING POINT (MAXIMUM) 115 Gauss 180 Gauss 390 Gauss RELEASE POINT (MINIMUM) 20 Gauss 75 Gauss 235 Gauss REFERENCE SS541AT SS543AT SS549AT Bipolar latching- temperature compensated 3,2 0.125 + MAGNETIC RANGE -670 to 670 Gauss -840 to 840 Gauss Unipolar - temperature compensated - 0 OPERATING POINT (MAXIMUM) 85 Gauss 180 Gauss RELEASE POINT (MINIMUM) -85 Gauss -180 Gauss REFERENCE SS561AT SS566AT REFERENCE SS495B SS496B www.honeywell.com/sensing 17 POSITION 2SS Series Magnetoresistive digital position sensor SR13 Series Hall effect digital position sensor SR16 Series Cost effective digital vane sensor 2SS Series position sensors have magnetoresistive material integrated on silicon and encapsulated in a plastic package. The integrated circuit provides a digital output in response to very low magnetic fields. Though this signal is identical to our digital Hall effect sensors, it can be achieved by magnetoresistive sensors at much greater sensor-to-magnet distances. SR13 series Hall-effect digital position sensors permit quick and easy sensor installation, with snap-in and flat mount sensor packages, and can house any of the present SS400 series sensors or any similarly sized sensing elements. SR16 series competitively priced Hall-effect digital vane sensors contain an internal magnet and Hall effect sensor mounted in a twin tower configuration. Supply voltage: Operating temperature: Maximum operating point: Minimum release point: Package style: Supply voltage: Operating temperature: 3.8 Vdc to 30 Vdc -40 C to 150 C -40 F to 302 F 25 Gauss 5 Gauss Plastic snap-in 3.8 Vdc to 30 Vdc -40 C to 150 C -40 F to 302 F Package style: Supply voltage: Operating temperature: Dual tower 3.8 Vdc to 30 Vdc -20 C to 85 C -4 F to 185 F OPTIONS Type J4 2x 5 MAX 2x 45 1,6 3,1 4,5 0.06 0.12 0.18 IC CENTER Type J6 3,1 0.12 2SS 4,5 0.18 OPTIONS 15,0 0.59 - O + Unipolar OPERATING POINT (MAXIMUM) 180 Gauss 115 Gauss 390 Gauss OPTIONS Omnipolar PACKAGE STYLE Radial lead IC Surface Mount MAXIMUM Operating Point and MINIMUM Release Point are specified @ 25 C RELEASE POINT (MINIMUM) 75 Gauss 20 Gauss 235 Gauss REFERENCE SR13C-A1 SR13D-A1 SR13F-A1 Bipolar latching REFERENCE 2SS52M 2SS52M-S OPERATING POINT (MAXIMUM) 85 Gauss RELEASE POINT (MINIMUM) -85 Gauss REFERENCE SR13R-A1 Type N PACKAGE STYLE PCB/Molex 557 connector Wire exit PCB mount leads 18 www.honeywell.com/sensing REFERENCE SR16C-J4 SR16C-J6 SR16C-N POSITION SR17 Series Cost effective digital vane sensor SR17 series competitively priced Hall-effect digital vane sensors are designed for position and speed sensing and are offered in a side-mount twin tower package. Package style: Supply voltage: Operating temperature: Side looker mounting 3.8 Vdc to 30 Vdc -20 C to 85 C -4 F to 185 F OPTIONS Type J6 Type J7 PACKAGE STYLE Side mount wire exit 41 in wire leads and connector REFERENCE SR17C-J6 SR17C-J7 www.honeywell.com/sensing 19 INFRARED Optoelectronics is the integration of optical principles and semi-conductor electronics. Optoelectronic components are reliable, cost effective sensors. Standard infrared emitting diodes (IREDs), sensors and assemblies are covered. Infrared Products Infrared sensors are used for presence sensing, motion sensing, position encoding, limit sensing, movement detection and counting. Plastic package T1, end-emitting - SEP8505/8705 Infrared emitting diodes OPTIONS Metal package, end-emitting Coaxial, lead case - SE1450/1470(L) Side-emitting - SEP8506/8706 Miniature pill - SE2460/2470 Side-emitting - SEP8736 TO-46, flat window - SE3455/3470 Operating temperature: OUTPUT WAVELENGTH (nm) 935 935 880 880 TO-46, dome lensed - SE5455/5470 Operating temperature: OUTPUT WAVELENGTH (nm) 935 880 935 880 935 880 935 880 20 -40 C to 85 C (-40 F to 185 F) BEAM ANGLE () 15 50 15 10 POWER OUTPUT 2.0 to 4.0 mW/cm 0.33 to 0.52 mW/cm 2.7 to 7.8 mW/cm 1.7 to 3.0 mW/cm REFERENCE SEP8505-003 SEP8506-002 SEP8705-003 SEP8736-003 Ceramic discrete surface mount - glass lens -55 C to 125 C (-67 F to 257 F) BEAM ANGLE () 24 24 18 18 90 90 20 20 POWER OUTPUT 0.70 mW min. 1.10 to 4.50 mW/cm 1.00 mW min. 6.0 mW/sr min. 5.4 mW min. 10.5 mW min. 4.8 mW min. 3.5 mW/cm min. REFERENCE SE1450-003L SE1470-003L SE2460-003 SE2470-002 SE3455-004 SE3470-003 SE5455-003 SE5470-004 Note: This device can be mounted with the lens up or down, looking through PCB. Operating temperature: OUTPUT WAVELENGTH (NM) 880 www.honeywell.com/sensing -55 C to 125 C (-67 F to 257 F) BEAM ANGLE () 24 POWER OUTPUT 0.60 mW/cm min. REFERENCE SME2470-021 INFRARED Phototransistors OPTIONS Metal package Coaxial, lead case - SD1440(L) Plastic package T1, end-looking - SDP8405 Side-looking- SDP8406 Miniature pill - SD2440 TO-46, flat window - SD3443 Side-looking - SDP8436 TO-46, dome lensed - SD5443 Operating temperature: ANGULAR RESPONSE () 20 50 18 -40 C to 85 C (-40 F to 185 F) LIGHT CURRENT MINUMUM (mA) 12.0 1.80 7.0 REFERENCE SDP8405-003 SDP8406-002 SDP8436-003 Ceramic discrete surface mount - glass lens Top-looking - SMD2420/2440 Operating temperature: ANGULAR RESPONSE () 24 48 90 18 -55 C to 125 C (-67 F to 257 F) LIGHT CURRENT MINUMUM (mA) 3.0 7.0 2.0 8.0 REFERENCE SD1440-003L SD2440-004 SD3443-003 SD5443-003 Note: This device can be mounted with the lens up or down, looking through PCB. Operating temperature: -55 C to 125 C (-67 F to 257 F) ANGULAR RESPONSE () 28 www.honeywell.com/sensing LIGHT CURRENT MINUMUM (mA) 3.0 REFERENCE SMD2440-012 21 INFRARED Optoschmitt detectors Encoder sensors Operating temperature: Turn-on threshold irradiance: Supply voltage: Package style: OPTIONS Metal package TO-46, dome lensed -40 C to 85 C (-40 F to 185 F) 0.05 mW/cm to 2.0 mW/cm 4.5 Vdc to 5.5 Vdc Plastic, PC mount OPTIONS Side-looking - HLC2705 Operating temperature: Supply voltage: Output: Angular response: OUTPUT LOGIC Buffer Inverter Buffer Inverter -40 C to 100 C (-40 F to 212 F) 16.0 V 10 kOhm Pull-up 12 TURN-ON THRESHOLD IRRADIANCE 2.5 mW/cm max. 2.5 mW/cm max. 0.25 mW/cm 0.25 mW/cm REFERENCE SD5600-001 SD5610-001 SD5620-001 SD5630-001 PC mount - HOA0901/0902 Plastic package Side-looking OUTPUT OPTION Speed and direction Direction, inverting logic Speed and direction, 2 tachometer Operating temperature: Supply voltage: Output: Angular response: OUTPUT LOGIC Buffer REFERENCE HLC2705-001 HOA0901-011 HOA0902-011 -40 C to 85 C (-40 F to 185 F) 16.0 V 10 kOhm Pull-up 50 TURN-ON THRESHOLD IRRADIANCE 2.5 mW/cm max. REFERENCE SDP8600-001 NOTICE Housings are soluble in chlorinated hydrocarbons and ketones. Recommended cleaning agents are methanol and isopropanol. 22 www.honeywell.com/sensing INFRARED Reflective sensors OPTIONS HOA Series Converging/focused optical axis - HOA0149 Metal components Converging/focused optical axis - HOA1180 Converging/focused optical axis - HOA2498 HOA1397 Operating temperature: Output: -55 C to 100 C (-67 F to 212 F) Transistor ON-STATE COLLECTOR CURRENT 0.16 mA 0.16 mA REFERENCE HOA1180-002 HOA2498-002 Converging/focused optical axis - HOA1405 Plastic package HLC1395 Series, short distance detection Operating temperature: Output: Low profile -40 C to 85 C (-40 F to 185 F) Transistor ON-STATE COLLECTOR CURRENT 0.60 mA 1.00 mA 0.70 mA 0.80 mA REFERENCE HLC1395-002 HOA0149-001 HOA1397-002 HOA1405-002 NOTICE Housings are soluble in chlorinated hydrocarbons and ketones. Recommended cleaning agents are methanol and isopropanol. www.honeywell.com/sensing 23 INFRARED HOA1882 Transmissive sensors, Phototransistor output Aperture (emitter and detector): O 1,52 mm (0.060 in) OPTIONS Metal components HOA1877 Aperture (emitter and detector): O 1,27 mm (0.050 in) Plastic components, wire leads HOA088X/089X Wire colour code and functions Red - IRED Anode Black - IRED Cathode Operating temperature: Output: White - Detector Collector Green - Detector Emitter -55 C to 100 C (-67 F to 212 F) Transistor ON-STATE COLLECTOR CURRENT 0.1 mA REFERENCE HOA1877-001 Plastic components HOA086X/087X HOA1870 Wire colour code and functions: Orange - IRED Anode Green - IRED Cathode Aperture (emitter and detector): White - Detector Collector Blue - Detector Emitter 0,15 mm (0.006 in) wide HOA1879 Operating temperature: Output: NOTICE Opaque housing Housings are soluble in chlorinated hydrocarbons and ketones. Recommended cleaning agents are methanol and isopropanol. 24 Opaque housing www.honeywell.com/sensing -40 C to 85 C (-40 F to 185 F) Transistor ON-STATE COLLECTOR CURRENT 1.00 mA 0.50 mA 0.50 mA 0.50 mA 0.30 mA 0.50 mA 1.80 mA REFERENCE HOA0866-T55 HOA0870-N51 HOA0880-P51 HOA0890-L55 HOA1870-031 HOA1879-015 HOA1882-012 INFRARED Transmissive sensors, Optoschmitt output OPTIONS Plastic components, integral 3 pin connector HOA7720/30 Plastic components HOA096X/097X HOA696X/697X Operating temperature: Opaque housing Opaque housing Opaque housing OUTPUT 10 kOhm Pull-up 10 kOhm Pull-up Open-Collector Totem-Pole Open-Collector Totem-Pole Totem-Pole Open-Collector -40 C to 70 C (-40 F to 158 F) OUTPUT LOGIC Buffer Buffer Inverter Inverter Buffer Buffer Inverter Inverter HYSTERESIS 10 % 10 % 5% 5% 5% 5% 5% 5% REFERENCE HOA0961-N51 HOA0971-N51 HOA6963-N51 HOA6972-N55 HOA6981-L51 HOA6990-T51 HOA7720-M22 HOA7730-M22 Plastic components, wire leads HOA698X/699X Wire colour code and functions: Red - IRED Anode Black - IRED Cathode Green - Detector Ground White - Detector Vcc Blue - Detector Output NOTICE Housings are soluble in chlorinated hydrocarbons and ketones. Recommended cleaning agents are methanol and isopropanol. www.honeywell.com/sensing 25 CURRENT Current Sensors Current sensors monitor ac or dc current. Included are adjustable linear, null balance, digital, and linear current sensors. Digital current sensors can sound an alarm, start a motor, open a valve or shut down a pump. The linear signal duplicates the waveform of the current being sensed, and can be used as a feedback element to control a motor or regulate the amount of work being done by a machine. OPTIONS CSN Series Closed Loop Current Sensors Multi turn PCB mounted Housing material: Mounting: Bayblend KU2-1468 (UL94-V0) PCB on 13 pins SENSED CURRENT RANGE 36 A COIL TURNS 1000 (110 Ohm coil) SUPPLY VOLTAGE 15 Vdc DIRECTION OF CURRENT I+ 31,8 (1.25) Closed loop current sensors measure ac, dc and impulse currents over 0-25, 0-50, 0-100, 0-600 and 0-1200 Amp ranges. The CSN series is based on the Hall effect principle and the null balance or zero magnetic flux method (feedback system). The magnetic flux in the sensor core is constantly controlled at zero. The amount of current required to balance zero flux is the measure of the primary current flowing through the conductor, multiplied by the ratio of the primary to secondary windings. This closed loop current is the output from the device and presents an image of the primary current reduced by the number of secondary turns at any time. This current can be expressed as a voltage by passing it through a resistor. The CSN Series has a high overload capacity, a high level of electrical insulation between primary and secondary circuits and a rapid response rate. Lightweight and compact, and with no restriction on input current waveform, the sensors are ideal for variable speed drives, power supplies, feedback control systems, robotics/welding equipment and general overcurrent protection. REFERENCE CSNE151 12,7 (0.50) 4,0 (0.16) 20,3 (0.80) -+0 O 0,80 (0.03) Secondary pin) PIN 1 O 1,25 (0.05) (Primary pin) I + DIRECTION OF CURRENT PIN 1 2,54 (0.100) 7,7 (0.27) 2,9 (0.114) 1,60 (0.06) 7,75 (0.305) 9,50 (0.37) 2,54 (0.100) Sensed current type: EMC: Accuracy: 26 ac or dc EN 50082-2, EN 50081-2 0.5 % SENSED CURRENT RANGE 90 A 90 A NOMINAL CURRENT 25 A 50 A www.honeywell.com/sensing COIL TURNS SUPPLY VOLTAGE 1000 (66 Ohm coil) 12 Vdc to 15 Vdc 1000 (66 Ohm coil) 12 Vdc to 15 Vdc REFERENCE CSNE151-100 CSNE151-200 CURRENT Small housed style Housing material: Mounting: SENSED CURRENT RANGE 70 A 90 A 100 A 100 A Pinout style `B' Bayblend FR 1440 (UL94-V0) PCB on 3 pins COIL TURNS 1000 (90 Ohm coil) 1000 (50 Ohm coil) 2000 (160 Ohm coil) 2000 (130 Ohm coil) SUPPLY VOLTAGE 15 Vdc 13 Vdc 15 Vdc 15 Vdc REFERENCE CSNA111 CSNC241-500 CSNB121 CSNB131 SENSED CURRENT RANGE 150 A 180 A 200 A 200 A COIL TURNS 1000 (30 Ohm coil) 2000 (100 Ohm coil) 2000 (100 Ohm coil) 1000 (30 Ohm coil) SUPPLY VOLTAGE 12 to 15 Vdc 12 to 15 Vdc 12 to 15 Vdc 12 to 15 Vdc REFERENCE CSNF161 CSNF151 CSNR151 CSNR161 SENSED CURRENT RANGE 150 A 200 A 200 A COIL TURNS 1000 (30 Ohm coil) 2000 (100 Ohm coil) 1000 (30 Ohm coil) SUPPLY VOLTAGE 12 to 15 Vdc 12 to 15 Vdc 12 to 15 Vdc REFERENCE CSNF161-002 CSNR151-002 CSNR161-002 Small housed family Housing material: Mounting: Bayblend KU2-1468 (UL94-V0) PCB on 3 pins Pinout style `A' SENSED CURRENT RANGE 90 A 150 A 180 A COIL TURNS 1000 (30 Ohm coil) 2000 (100 Ohm coil) 2000 (100 Ohm coil) SUPPLY VOLTAGE 12 to 15 Vdc 12 to 15 Vdc 15 Vdc REFERENCE CSNP661 CSNT651 CSNG251 SENSED CURRENT RANGE 90 A 150 A COIL TURNS 1000 (30 Ohm coil) 2000 (100 Ohm coil) SUPPLY VOLTAGE 12 to 15 Vdc 12 to 15 Vdc REFERENCE CSNP661-002 CSNT651-001 www.honeywell.com/sensing 27 CURRENT CSN Series Closed Loop Current Sensors (Continued) CSLA Series Open Loop Current Sensors Mid range housed style Housing material: Mounting: Bayblend KU2-1468 (UL94-V0) Panel, spade terminals x 3 CS series linear current sensors incorporate our 91SS12-2 and SS94A1linear output Hall effect transducer (LOHETTM). These sensors cover measuring ranges from 0-950 Amps. The sensing element is assembled in a printed circuit board mountable housing. This housing is available in four configurations. Normal mounting is with 0.375 inch long 4-40 screw and square nut (not provided) inserted in the housing or a 6-20 self-tapping screw. The combination of the sensor, flux collector, and housing comprises the holder assembly. These sensors are ratiometric. Sensed current type: Housing: ac or dc PBT Polyester OPTIONS SENSED CURRENT RANGE 600 A 600 A (fitted with busbar) COIL TURNS 2000 (25 Ohm coil) 2000 (25 Ohm coil) SUPPLY VOLTAGE 12 to 18 Vdc 12 to 18 Vdc REFERENCE CSNJ481 CSNJ481-001 PCB bottom mount Large housed style Housing material: Mounting: Bayblend KU2-1468 (UL94-V0) Panel, spade terminals x 3 SENSED CURRENT RANGE 0 to 75 A 0 to 92 A 0 to 150 A 0 to 225 A 0 to 225 A 0 to 325 A 0 to 400 A SENSED CURRENT RANGE COIL TURNS 1200 A 5000 (50 Ohm coil) 1200 A (fitted with busbar) 5000 (50 Ohm coil) 28 SUPPLY VOLTAGE 15 to 24 Vdc 15 to 24 Vdc REFERENCE CSNK591 CSNK591-001 www.honeywell.com/sensing SUPPLY VOLTAGE 8 to 16 Vdc 6 to 12 Vdc 6 to 12 Vdc 8 to 16 Vdc 6 to 12 Vdc 8 to 16 Vdc 6 to 12 Vdc REFERENCE CSLA1DE CSLA2DE CSLA2DG CSLA1DJ CSLA2DJ CSLA1DK CSLA2DK CURRENT PCB bottom mount PCB side mount SENSED CURRENT RANGE 45 A SUPPLY VOLTAGE 4.5 to 10.5 Vdc REFERENCE CSLH3A45 SUPPLY VOLTAGE 6 to 16 Vdc REFERENCE CSDA1BC Digital current sensor SENSED CURRENT RANGE 0 to 57 A 0 to 72 A 0 to 100 A 0 to 150 A SUPPLY VOLTAGE 8 to 16 Vdc 6 to 12 Vdc 8 to 16 Vdc 8 to 16 Vdc REFERENCE CSLA1CD CSLA2CD CSLA1CF CSLA1CH SUPPLY VOLTAGE 6 to 12 Vdc 6 to 12 Vdc 8 to 16 Vdc 6 to 12 Vdc 6 to 12 Vdc REFERENCE CSLA2EJ CSLA2EL CSLA1EL CSLA2EM CSLA2EN PCB bottom mount SENSED CURRENT RANGE 0 to 310 A 0 to 550 A 0 to 625 A 0 to 765 A 0 to 950 A PCB side mount OPERATE CURRENT 3.5 A.t Nominal SENSED CURRENT RANGE 0 to 57 A 0 to 72 A SUPPLY VOLTAGE 8 to 16 Vdc 6 to 12 Vdc REFERENCE CSLA1GD CSLA2GD www.honeywell.com/sensing 29 LIQUID LEVEL Honeywell liquid level sensor components incorporate a voltage level switch which provides a digital output that denotes the presence or absence of liquid. Liquid Level Sensors The mode of operation is derived from the principle of total internal reflection. An LED and detector are housed within a plastic dome at the head of the device. When no liquid is present, all light from the LED is totally internally reflected from the dome boundary to the detector. When liquid covers the dome, the effective refractive index at the dome/liquid boundary changes, allowing some light from the LED to escape. Thus the amount of light received by the voltage level switch is reduced and the output switches, denoting the presence of liquid. This method of liquid level sensing is very fast, and instantaneous for water. The LL Series is a basic component which requires external circuit protection; this protection is incorporated in the LLE Series. Housing: Termination: Supply voltage: Pressure range: Polysulphone 250 mm lead wires +5 Vdc 0 to 5 bar Type 5 LL Series Operating temperature: Standard High temperature Storage temperature: Standard High temperature LLE Series Operating temperature: -20 C to 85 C -4 F to 185 F -40 C to 125 C -40 F to 257 F -40 C to 100 C -40 F to 212 F -50 C to 150 C -58 F to 302 F -25 C to 80 C -13 F to 176 F -30 C to 85 C -22 F to 185 F Storage temperature: y ; Vcc RED High temperature SEAL WASHER Nitrile rubber REFERENCE LL105100 VOLTAGE REGULATOR OUTPUT GREEN SCHMITT TRIGGER IRED PHOTO TRANSISTOR 0V BLUE OPTIONS Type 2 OPTIONS 22,49 (0.89) M12 x 1 - 8 g Type 2 19,40 (0.76) 12,45 (0.49) 19,00 (0.75) 4,70 (0.19) (0.01 in 2 ) 0,22 mm 2 Tinned Ends High temperature SEAL WASHER Vamac REFERENCE LL102101 SEAL WASHER Nitrile rubber Type 3 REFERENCE LLE102000 Type 5 +0.004 (0.39 -0 O10,00 ) +0,10 -0 16,12 (0.63) 2,3 (0.09) Standard High temperature SEAL WASHER Nitrile rubber Vamac 4,1 (0.16) REFERENCE LL103000 LL103101 13,0 (0.51) SEAL WASHER Nitrile rubber 30 (0.01 in 2 ) 0,22 mm 2 Tinned Ends www.honeywell.com/sensing REFERENCE LLE105000 BASIC SWITCHES These listings include standard size basics, miniature, subminiature, switches. The precision snap-action mechanisms are offered with a wide variety of actuators and operating characteristics. Basic switches are ideal for applications requiring compactness, light weight, accurate repeatability and long life. Basic Switches They are best used for presence/absence detection where physical contact with object is permissible. Very economical. Overtravel plunger - standard BA/BE/BZ Series Basic Switches Overtravel plunger (splash resistant) BA/BE/BZ Series Standard Basic Switches are used for simple or precision on/off application needs. As well as the catalogue listings presented here, we offer other versions with higher temperature ratings, different termination options, different electrical ratings and Single Pole, Single Throw (SPST) circuitry. Refer to our website for details. Voltage: Electrical rating: Operating temperature: Termination: Contact type: Approvals: Switching options: 250 Vac 16 A -55 C to 85 C -67 F to 185 F Screw Silver CE, CSA, UL SPDT Single Pole, Double Throw ELECTRICAL RATING 20 A REFERENCE BZ-2RD-A2 BA-2RB-A2 Panel mount overtravel plunger Stainless steel spring REFERENCE BZ-2RDS-A2 BZ-2RDS-A2S Overtravel roller plunger OPTIONS Note: BA/BE plunger position distance from mounting hole = 19 mm (0.75 in) Top pin plunger ELECTRICAL RATING 20 A Approvals: ELECTRICALRATING 25 A BE-2R-A4 TERMINATION Solder Screw Solder Screw Screw APPROVALS REFERENCE DEMKO BZ-2RQ1-A2 BA-2RQ1-A2 REFERENCE BZ-2RQ18-A2 CSA, UL REFERENCE BZ-R BZ-R-A2 BZ-R169 BZ-2R-A2 BE-2R-A4 www.honeywell.com/sensing 31 BASIC SWITCHES BA/BE/BZ Series Basic Switches (Continued) DT Series Basic Switch DT Series Standard Basic Switches consist of two independent single-pole double throw circuits in one housing actuated by one actuator. The terminals are separated by a non-conductive shield to reduce shorting. Overtravel roller plunger, perpendicular Voltage: Electrical rating: Operating temperature: Termination: Contact type: Approvals: Switching options: REFERENCE BZ-2RQ181-A2 Straight lever 250 Vac 10 A -55 C to 85 C -67 F to 185 F Screw Silver CSA, UL DPDT Double Pole, Double Throw TB Series Miniature Double-break Basic Switch TB Series Miniature Double-break Basic Switches are basic double-break units that offer a means of controlling isolated circuits. Each circuit may be driven by an independent voltage source. Voltage: Electrical rating: Operating temperature: 250 Vac 10 A -55 C to 125 C -67 F to 257 F Termination: Solder Contact type: Silver Approvals: CSA, UL Switching options: (SPDT DB) Single Pole, Double Throw, Double Break OPTIONS OPTIONS Top pin plunger Top pin plunger Dimensions in inches 1.825 REF 1.57 0.53 0.50 0.87 DIA HOLE IN TERMINALS (4) 0.13 0.20 0.24 0.15 PLASTIC PLUNGER 0.260 0.22 0.16 R 0.113 .002 DIA 0.06 MAX PRETRAVEL REFERENCE DT-2R-A7 ELECTRICAL RATING 20 A APPROVALS LEVER RADIUS REFERENCE No return spring 152,4 mm BA-2RV-A2 BZ-2RW80-A2 BZ-2RW84-A2 BZ-2RW863-A2 +.002 Roller lever TERMINATION LEVER RADIUS Solder Splash resistant 32 4 3 1 2 0.50 0.25 0.03 0.101 - .001 DIA HOLE DEMKO +.002 0.101 - .001 0.46 OPERATING POSITION 0.312 .003 Basic Switch Accessories A range of accessories is available for BA, BE, BZ and DT switches, such as the 5PA2 terminal enclosure. For more information please contact your local sales office. REFERENCE BZ-2RW822-A2 BZ-2RW822 BZ-2RW8225551-A2 One way, BZ-2RW826-A2 32,1 mm 48,3 mm BZ-2RW82-A2 www.honeywell.com/sensing 0.365 0.09 0.532 .003 1.25 NOTE1 - TERMINALS 1 & 2 NORMALLY CLOSED CIRCUIT 2 - TERMINALS 3 & 4 NORMALLY OPEN CIRCUIT 3 - TERMINALS ARE PLATED FOR SOLDERING REFERENCE 1TB1-2 BASIC SWITCHES SM and SX Series Subminiature Basic Switches SM Series OPTIONS OPTIONS SM and SX Series Subminiature Basic Switches are used for simple or precision on/off application needs. These switches combine small size and light weight with ample electrical capacity, precision operation and long life. The SX Series are small, precision, snap-action switches that are ideal where savings in space and weight are important. Top pin plunger Top pin plunger Voltage: Operating temperature: Termination: Contact type: Switching options: 250 Vac -55 C to 125 C -67 F to 257 F Solder Silver SPDT Single Pole, Double Throw Approvals: Ampere rating: Approvals: SX Series CE, CSA, UL 5A 11SM601-H4 TERMINATION Quick connect UL, CSA REFERENCE 11SM1 11SM601-H4 Straight lever Lever length 4,83 mm Approvals: Ampere rating: Approvals: CONTACTS Silver Silver Gold CE, CSA, UL 5A 6SX7-T AMPERE RATING 7A 3A 1A UL, CSA REFERENCE 1SX1-T 11SX1-T 6SX7-T Straight lever REFERENCE 111SM1 Roller lever Lever length `A' 12,8 mm Lever length `A' 24,5 mm REFERENCE 311SX2-T 311SX3-T Simulated roller REFERENCE 111SM2-T REFERENCE 311SX5-T www.honeywell.com/sensing 33 BASIC SWITCHES V5 Series Miniature Basic Switches Straight lever Type B 1,6 (P.T.) V5 Series Basic Switches are used for simple or precision on/off, end of limit, presence/absence, pressure, temperature and manual operator interface application needs. Voltage: Operating temperature: Standard 1,6 (P.T.) OPTIONS 20,6 22 8,1 8,1 20,6 (O.P.) 15,3 (O.P.) 250 Vac -55 C to 85 C -67 F to 185 F High temperature -55 C to 150 C -67 F to 302 F Termination: 6,3 mm x 0,8 mm Quick connect (QC) Contact type: Silver/silver cadmium oxide Electrical rating: V5A 20 A V5B/P/R 16 A V5C/D 10 A V5S 22 A Switching options: SPDT Single Pole Double Throw Roller lever Type D APPROVALS CE, CSA, ENEC, UL REFERENCE V5C010BB3B REFERENCE V5B210CB3D V5C010BB3D High temperature Type E Type C 3,2 (P.T.) APPROVALS CE, CSA, ENEC, UL CE, CSA, ENEC, UL 3,2 (P.T.) 34 35,6 8,1 8,1 20,6 (O.P.) 15,3 (O.P.) Top pin plunger 22,2 20,2 14,7 Operating position 2,8 O3,1 3,1 10,3 2,8 NC 2 C1 15,9 APPROVALS CE, ENEC High temperature REFERENCE V5B210CB1C NO 4 Type G 3,4 28,8 Lever slot position 2 Lever slot position 1 4,4 6,4 (P.T.) 59,5 8,1 10,3 2,8 APPROVALS CE, ENEC CE, CSA, ENEC, UL CE, CSA, UL CE, ENEC CE, ENEC CE, ENEC CE, CSA, ENEC, UL CE, CSA, ENEC, UL CE, ENEC APPROVALS CE, ENEC CE, ENEC CE, BEAB CE, BEAB 34 15,3 (O.P.) 8,1 14,1 4,8 mm x 0,5 mm QC Solder terminals High temperature 4,8 mm x 0,5 mm QC Solder terminals SWITCHING OPTIONS SPNO SPNO SPNC SPNO REFERENCE V5A010CB V5B010CB3 V5B010FB3 V5B010TB V5B210CB V5C010BB V5C010EB3 V5C010TB3 V5P010CB APPROVALS CE, ENEC REFERENCE V5C010BB1G REFERENCE V5D030BB V5R030CB V5S020CB V5S030CB www.honeywell.com/sensing APPROVALS CE, CSA, ENEC, UL CE, ENEC Lever position 2 High temperature REFERENCE V5A010CB4E V5B210CB1E BASIC SWITCHES V7 Series Miniature Basic Switches AVAILABLE TERMINALS OPTIONS Quick Connect (QC) Top pin plunger 10,2 .40 V5 and V7 Series Basic Switches are used for simple or precision on/off, end of limit, presence/ absence, pressure, temperature and manual operator interface application needs. The V7 Series also offers listings with Single Pole, Single Throw circuitry (available in either normally open (NO) or normally closed (NC) configurations). Refer to our website for details. Operating temperature: Standard -40 C to 82 C -40 F to 180 F High temperature -40 C to 200 C -40 F to 350 F Termination: Quick connect (QC) D8, E8 - 4,8 mm (0.187 in) x 0.5 mm (0.02 in) E9 - 6,35 mm (0.25 in) x 0,80 mm (0.032 in) Printed circuit board (PCB) Electrical rating Contact Type V7-*A 5A Silver V7-*B 11 A Silver V7-*C/W 15 A Silver V7-*D 1A Gold alloy V7-*E 10 A Silver V7-*S 100 mA Gold alloy V7-*V 21 A Silver alloy V7-*Z 25 A Silver cadmium oxide Approvals: CSA, UL, ENEC V7-*C/D/W CSA, UL Switching options: SPDT Single Pole Double Throw 6,4 .25 20,2 .80 2,8 .11 1,0 .04 2,90 O hole (3,10/.122 option) .114 2,8 .11 D8 terminals are European approved when used with electrical ratings A, B, D, E or S. International approving agencies require that switches with these terminals have insulated receptacles or connector. 10,3 .41 2,8 .11 1,5 0.06 8,9 .35 18,2 MAX .72 NC COM 2,90 .114 DIA 3,10 .122 OPT 3,20 DIA .126 3,46 .134 OPT 22,2 .88 28,8 1.14 NO 2,4 .10 14,4 .57 0,8 (3) .03 Note: The optional mounting hole dimensions shown above are standard on V5/V7 International Series switches. E8 terminals are European approved when used with electrical ratings A, B, D, E or S. E9 terminals are European approved when used with electrical ratings A, B, D, E, S, V or Z. Printed circuit board (PO2) These terminals interface with snap-on receptacles and other components from AMPNODU interconnection system. VOLTAGE 250 Vac 250 Vac 250 Vac 250 Vac 250 Vac 277 Vac 277 Vac 125 Vac 277 Vac 277 Vac 277 Vac 125 Vac 277 Vac 250 Vac 250 Vac 250 Vac 277 Vac 277 Vac 125 Vac 250 Vac 277 Vac 277 Vac 277 Vac 277 Vac 277 Vac 125 Vac 250 Vac 250 Vac 125 Vac 125 Vac 277 Vac 277 Vac 277 Vac TERMINATION PCB PCB PCB REFERENCE V7-1A17D8 V7-1A17P02 V7-1B17D8 V7-1B19E9 V7-1C17D8 V7-1C17E9 V7-1C18E9 V7-1D10D8 V7-1E10D8 V7-1E17P02 V7-1E19E9 V7-1S17D8 V7-1V19E9 V7-1Z19E9 V7-2A17E9 V7-2B17D8 V7-2B17E9 V7-2B17P02 V7-2S17D8 V7-3A17D8 V7-3E10E8 V7-3E10E9 V7-3E17D8 V7-3E17E9 V7-3E19E9 V7-3S17E9 V7-4A17D8 V7-4A18E9 V7-4S17D8 V7-5D17E9 V7-6B19D8 V7-6C17D8 V7-7A19D8 Straight lever Type -002 PCB terminals are European approved when used with electrical ratings A, B, D, E, S. VOLTAGE 277 Vac 277 Vac 277 Vac 277 Vac www.honeywell.com/sensing REFERENCE V7-1C17D8-002 V7-1C17E9-002 V7-2B17E9-002 V7-6C18D8-002 35 BASIC SWITCHES V7 Series Miniature Basic Switches (Continued) Roller lever Type -201 Straight lever Type -022 VOLTAGE 277 Vac 277 Vac 125 Vac 277 Vac 125 Vac 277 Vac VOLTAGE 250 Vac 277 Vac 277 Vac 277 Vac 125 Vac 250 Vac 277 Vac 125 Vac 277 Vac 125 Vac 125 Vac REFERENCE V7-1A17D8-022 V7-1B19D8-022 V7-1C17D8-022 V7-1C18E9-022 V7-1S17D8-022 V7-2A17D8-022 V7-2B17D8-022 V7-2S17D8-022 V7-3E17E9-022 V7-3S17D8-022 V7-3S17E9-022 VOLTAGE 277 Vac 277 Vac 277 Vac 277 Vac 277 Vac 125 Vac 277 Vac 250 Vac High temperature Type -207 VOLTAGE 277 Vac 277 Vac 277 Vac 125 Vac 277 Vac 250 Vac 277 Vac 125 Vac Type -048 REFERENCE V7-1B17D8-048 V7-1C17D8-048 V7-1V19E9-048 V7-2B17D8-048 V7-2B19E9-048 V7-3S17D8-048 V7-6C18D8-048 V7-9W1AE9-048 REFERENCE V7-1B10E9-207 V7-1C17D8-207 V7-1C17E9-207 V7-1S17D8-207 V7-1V19E9-207 V7-2A17D8-207 V7-2B17D8-207 V7-7D17D8-207 Simulated roller lever Type -263 VOLTAGE 277 Vac 277 Vac 125 Vac 125 Vac 125 Vac 277 Vac 277 Vac 36 REFERENCE V7-1C17D8-201 V7-1C17E9-201 V7-1S17D8-201 V7-2B17D8-201 V7-2S17D8-201 V7-7B17D8-201 REFERENCE V7-1B17D8-263 V7-1C17D8-263 V7-1S17D8-263 V7-2S17D8-263 V7-3S17E9-263 V7-6C17D8-263 V7-7B19D8-263 www.honeywell.com/sensing INDEX Index 111SM1 ................................. 33 111SM2-T ............................. 33 11SM1 ................................... 33 11SM601-H4 ......................... 33 11SX1-T ................................ 33 141PC15G ............................... 9 142PC01D ............................... 9 142PC01G ............................... 9 142PC02G ............................... 9 142PC05D ............................... 9 142PC05D97 ........................... 9 142PC05G ............................... 9 142PC15A ............................... 9 142PC15AW95 ........................ 9 142PC15G ............................... 9 143PC03D ............................... 9 143PC05DW ............................ 9 162PC01D ............................... 9 163PC01D36 ........................... 9 163PC01D48 ........................... 9 163PC01D61 ........................... 9 163PC01D75 ........................... 9 164PC01D37 ........................... 9 164PC01D76 ........................... 9 1SX1-T .................................. 33 1TB1-2 .................................. 32 24PC01SMT ............................ 5 24PC05SMT ............................ 5 24PC15SMT ............................ 5 24PCAFA6G ............................. 4 24PCBFA6D ............................. 4 24PCBFA6G ............................. 4 24PCCFA6D ............................. 4 24PCCFA6G ............................. 4 24PCCFG6G ............................. 4 24PCDFA6D ............................. 4 24PCDFA6G ............................. 4 24PCDFG6G ............................ 4 24PCEFA6D ............................. 4 24PCEFA6G ............................. 4 24PCFFA6D .............................. 4 24PCFFA6G .............................. 4 26PC01SMT ............................ 5 26PC05SMT ............................ 5 26PC15SMT ............................ 5 26PCAFA6D ............................. 4 26PCAFA6G ............................. 4 26PCAFG6G ............................. 4 26PCBFA6D ............................. 4 26PCBFA6G ............................. 4 26PCCFA6D ............................. 4 26PCCFA6G ............................. 4 26PCCFG6G ............................. 4 26PCDFA6D ............................. 4 26PCDFA6G ............................. 4 26PCDFG2G ............................ 5 26PCFFA6G .............................. 4 26PCFFG6G ............................. 4 26PCFFU5G ............................. 5 26PCGFA6D ............................. 4 2SS52M ................................ 18 2SS52M-S ............................. 18 311SX2-T .............................. 33 311SX5-T .............................. 33 40PC001B1A ........................... 8 40PC006G1A ........................... 8 40PC015G1A ........................... 8 40PC015V1A ........................... 8 40PC030G1A ........................... 8 40PC100G1A ........................... 8 40PC150G1A ........................... 8 40PC250G1A ........................... 8 40PC500G1A ........................... 8 6SX7-T .................................. 33 AWM2100V ........................... 10 AWM2200V ........................... 10 AWM2300V ........................... 10 AWM3100V ........................... 10 AWM3200V ........................... 10 AWM3300V ........................... 10 AWM42150VH ....................... 10 AWM42300V ......................... 10 AWM43300V ......................... 10 AWM43600V ......................... 10 AWM5101VN ......................... 11 AWM5102VN ......................... 11 AWM5104VC ......................... 11 AWM5104VN ......................... 11 AWM720P1 ........................... 11 BA-2RB-A2 ............................ 31 BA-2RQ1-A2 .......................... 31 BA-2RV-A2 ............................ 32 BE-2R-A4 .............................. 31 BZ-2R-A2 .............................. 31 BZ-2RD-A2 ............................ 31 BZ-2RDS-A2 .......................... 31 BZ-2RDS-A2S ........................ 31 BZ-2RQ181-A2 ...................... 32 BZ-2RQ18-A2 ........................ 31 BZ-2RQ1-A2 .......................... 31 BZ-2RW80-A2 ....................... 32 BZ-2RW822 ........................... 32 BZ-2RW8225551-A2 ............. 32 BZ-2RW822-A2 ..................... 32 BZ-2RW826-A2 ..................... 32 BZ-2RW82-A2 ....................... 32 BZ-2RW84-A2 ....................... 32 BZ-2RW863-A2 ..................... 32 BZ-R ...................................... 31 BZ-R169 ................................ 31 BZ-R-A2 ................................ 31 CPCL04DFC ............................. 5 CPCL04GFC ............................. 5 CPCL10DF ............................... 5 CPCL10DFC ............................. 5 CPXL04DF ............................... 5 CSDA1BC .............................. 29 CSLA1CD ............................... 29 CSLA1CF ............................... 29 CSLA1CH ............................... 29 CSLA1DE ............................... 28 CSLA1DJ ............................... 28 CSLA1DK ............................... 28 CSLA1EL ............................... 29 CSLA1GD .............................. 29 CSLA2CD ............................... 29 CSLA2DE ............................... 28 CSLA2DG .............................. 28 CSLA2DJ ............................... 28 CSLA2DK ............................... 28 CSLA2EJ ................................ 29 CSLA2EL ............................... 29 CSLA2EM .............................. 29 CSLA2EN ............................... 29 CSLA2GD .............................. 29 CSLH3A45 ............................. 29 CSNA111 ............................... 27 CSNB121 ............................... 27 CSNB131 ............................... 27 CSNC241-500 ....................... 27 CSNE151 ............................... 26 CSNE151-100 ........................ 26 CSNE151-200 ........................ 26 CSNF151 ............................... 27 CSNF161 ............................... 27 CSNF161-002 ........................ 27 CSNG251 ............................... 27 CSNJ481 ............................... 28 CSNJ481-001 ........................ 28 CSNK591 ............................... 28 www.honeywell.com/sensing CSNK591-001 ....................... 28 CSNP661 ............................... 27 CSNP661-002 ....................... 27 CSNR151 ............................... 27 CSNR151-002 ....................... 27 CSNR161 ............................... 27 CSNR161-002 ....................... 27 CSNT651 ............................... 27 CSNT651-001 ........................ 27 DC001NDC4 ............................ 6 DC005NDR4 ............................ 6 DCXL01DN .............................. 6 DCXL10DN .............................. 6 DT-2R-A7 .............................. 32 DUXL01D ................................ 6 DUXL10D ................................ 6 FSG15N1A ............................. 12 FSL05N2C ............................. 12 HEL-700-T-0-A ...................... 14 HEL-700-T-0-B ...................... 14 HEL-700-T-1-A ...................... 14 HEL-700-T-1-B ...................... 14 HEL-700-U-0-A ...................... 14 HEL-700-U-0-B ...................... 14 HEL-700-U-0-C ...................... 14 HEL-700-U-1-A ...................... 14 HEL-700-U-1-B ...................... 14 HEL-700-U-1-C ...................... 14 HEL-705-T-0-12-00 ............... 15 HEL-705-T-1-12-00 ............... 15 HEL-705-U-0-12-00 .............. 15 HEL-705-U-1-12-00 .............. 15 HEL-707-T-0-12-00 ............... 15 HEL-707-T-1-12-00 ............... 15 HEL-707-U-0-12-00 .............. 15 HEL-707-U-1-12-00 .............. 15 HEL-711-T-0-12-00 ............... 15 HEL-711-T-1-12-00 ............... 15 HEL-711-U-0-12-00 .............. 15 HEL-711-U-1-12-00 .............. 15 HEL-712-T-0-12-00 ............... 15 HEL-712-T-1-12-00 ............... 15 HEL-712-U-0-12-00 .............. 15 HEL-712-U-1-12-00 .............. 15 HEL-716-T-0-12-00 ............... 15 HEL-716-T-1-12-00 ............... 15 HEL-716-U-0-12-00 .............. 15 HEL-716-U-1-12-00 .............. 15 HEL-716-U-1-12-C2 .............. 15 HEL-717-T-0-12-00 ............... 15 37 INDEX HEL-717-T-1-12-00 ............... 15 HEL-717-U-0-12-00 .............. 15 HEL-717-U-1-12-00 .............. 15 HIH-3602-A ........................... 13 HIH-3602-C ........................... 13 HIH-3602-L ........................... 13 HIH-3610-001 ....................... 13 HIH-3610-002 ....................... 13 HIH-3610-003 ....................... 13 HIH-3610-004 ....................... 13 HLC1395-002 ........................ 23 HLC2705-001 ........................ 22 HOA0149-001 ....................... 23 HOA0866-T55 ....................... 24 HOA0870-N51 ....................... 24 HOA0880-P51 ....................... 24 HOA0890-L55 ....................... 24 HOA0901-011 ....................... 22 HOA0902-011 ....................... 22 HOA0961-N51 ....................... 25 HOA0971-N51 ....................... 25 HOA1180-002 ....................... 23 HOA1397-002 ....................... 23 HOA1405-002 ....................... 23 HOA1870-031 ....................... 24 HOA1877-001 ....................... 24 HOA1879-015 ....................... 24 HOA1882-012 ....................... 24 HOA2498-002 ....................... 23 HOA6963-N51 ....................... 25 HOA6972-N55 ....................... 25 HOA6981-L51 ....................... 25 HOA6990-T51 ....................... 25 HOA7720-M22 ...................... 25 HOA7730-M22 ...................... 25 LL102101 .............................. 30 LL103000 .............................. 30 LL103101 .............................. 30 LL105100 .............................. 30 LLE102000 ............................ 30 LLE105000 ............................ 30 SD1440-003L ........................ 21 SD2440-004 .......................... 21 SD3443-003 .......................... 21 SD5443-003 .......................... 21 SD5600-001 .......................... 22 SD5610-001 .......................... 22 SD5620-001 .......................... 22 SD5630-001 .......................... 22 SDP8405-003 ........................ 21 SDP8406-002 ........................ 21 SDP8436-003 ........................ 21 SDP8600-001 ........................ 22 38 SE1450-003L ........................ 20 SE1470-003L ........................ 20 SE2460-003 .......................... 20 SE2470-002 .......................... 20 SE3455-004 .......................... 20 SE3470-003 .......................... 20 SE5455-003 .......................... 20 SE5470-004 .......................... 20 SEP8505-003 ........................ 20 SEP8506-002 ........................ 20 SEP8705-003 ........................ 20 SEP8736-003 ........................ 20 SMD2440-012 ....................... 21 SME2470-021 ....................... 20 SR13C-A1 .............................. 18 SR13D-A1 ............................. 18 SR13F-A1 .............................. 18 SR13R-A1 ............................. 18 SR16C-J4 .............................. 18 SR16C-J6 .............................. 18 SR16C-N ............................... 18 SR17C-J6 .............................. 19 SR17C-J7 .............................. 19 SS41 ...................................... 16 SS411A ................................. 16 SS413A ................................. 16 SS441A ................................. 16 SS443A ................................. 16 SS449A ................................. 16 SS461A ................................. 16 SS466A ................................. 16 SS49 ...................................... 17 SS495A ................................. 16 SS495A1 ............................... 16 SS495A1-S ............................ 16 SS495A-SP ........................... 16 SS495B ................................. 17 SS496B ................................. 17 SS511AT ............................... 17 SS513AT ............................... 17 SS51T ................................... 17 SS541AT ............................... 17 SS543AT ............................... 17 SS549AT ............................... 17 SS561AT ............................... 17 SS566AT ............................... 17 SS94A1 ................................. 17 SS94A1F ................................ 17 SS94A2 ................................. 17 SX3-T .................................... 33 TD4A ..................................... 15 TD5A ..................................... 15 V5A010CB ............................. 34 V5A010CB4E ......................... 34 V5B010CB3 ........................... 34 V5B010FB3 ........................... 34 V5B010TB ............................. 34 V5B210CB ............................. 34 V5B210CB1C ......................... 34 V5B210CB1E ......................... 34 V5B210CB3D ......................... 34 V5C010BB ............................. 34 V5C010BB1G ......................... 34 V5C010BB3B ......................... 34 V5C010BB3D ......................... 34 V5C010EB3 ........................... 34 V5C010TB3 ........................... 34 V5D030BB ............................. 34 V5P010CB ............................. 34 V5R030CB ............................. 34 V5S020CB ............................. 34 V5S030CB ............................. 34 V7-1A17D8 ............................ 35 V7-1A17D8-022 .................... 36 V7-1A17P02 .......................... 35 V7-1B10E9-207 ..................... 36 V7-1B17D8 ............................ 35 V7-1B17D8-048 .................... 36 V7-1B17D8-263 .................... 36 V7-1B19D8-022 .................... 36 V7-1B19E9 ............................ 35 V7-1C17D8 ............................ 35 V7-1C17D8-002 .................... 35 V7-1C17D8-022 .................... 36 V7-1C17D8-048 .................... 36 V7-1C17D8-201 .................... 36 V7-1C17D8-207 .................... 36 V7-1C17D8-263 .................... 36 V7-1C17E9 ............................ 35 V7-1C17E9-002 ..................... 35 V7-1C17E9-201 ..................... 36 V7-1C17E9-207 ..................... 36 V7-1C18E9 ............................ 35 V7-1C18E9-022 ..................... 36 V7-1D10D8 ............................ 35 V7-1E10D8 ............................ 35 V7-1E17P02 .......................... 35 V7-1E19E9 ............................ 35 V7-1S17D8 ............................ 35 V7-1S17D8-022 .................... 36 V7-1S17D8-201 .................... 36 V7-1S17D8-207 .................... 36 V7-1S17D8-263 .................... 36 V7-1V19E9 ............................ 35 V7-1V19E9-048 ..................... 36 V7-1V19E9-207 ..................... 36 www.honeywell.com/sensing V7-1Z19E9 ............................ 35 V7-2A17D8-022 .................... 36 V7-2A17D8-207 .................... 36 V7-2A17E9 ............................ 35 V7-2B17D8 ............................ 35 V7-2B17D8-022 .................... 36 V7-2B17D8-048 .................... 36 V7-2B17D8-201 .................... 36 V7-2B17D8-207 .................... 36 V7-2B17E9 ............................ 35 V7-2B17E9-002 ..................... 35 V7-2B17P02 .......................... 35 V7-2B19E9-048 ..................... 36 V7-2S17D8 ............................ 35 V7-2S17D8-022 .................... 36 V7-2S17D8-201 .................... 36 V7-2S17D8-263 .................... 36 V7-3A17D8 ............................ 35 V7-3E10E8 ............................ 35 V7-3E10E9 ............................ 35 V7-3E17D8 ............................ 35 V7-3E17E9 ............................ 35 V7-3E17E9-022 ..................... 36 V7-3E19E9 ............................ 35 V7-3S17D8-022 .................... 36 V7-3S17D8-048 .................... 36 V7-3S17E9 ............................ 35 V7-3S17E9-022 ..................... 36 V7-3S17E9-263 ..................... 36 V7-4A17D8 ............................ 35 V7-4A18E9 ............................ 35 V7-4S17D8 ............................ 35 V7-5D17E9 ............................ 35 V7-6B19D8 ............................ 35 V7-6C17D8 ............................ 35 V7-6C17D8-263 .................... 36 V7-6C18D8-002 .................... 35 V7-6C18D8-048 .................... 36 V7-7A19D8 ............................ 35 V7-7B17D8-201 .................... 36 V7-7B19D8-263 .................... 36 V7-7D17D8-207 .................... 36 V7-9W1AE9-048 ................... 36 XCA415AN ............................... 7 XCX01DNC .............................. 7 XCX01DNH .............................. 7 XCX15DNC .............................. 7 XPC01DFC ............................... 7 XPC15DTC ............................... 7 XSXL04GF ............................... 8 Inside back cover - blank Warranty/Remedy Sales and Service Honeywell warrants goods of its manufacture as being free of defective material and faulty workmanship. Contact your local sales office for warranty information. If warranted goods are returned to Honeywell during that period of coverage, Honeywell will repair or replace without charge those items it finds defective. The foregoing is Buyer's sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. While we provide application assistance, personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application. Specifications may change at any time without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. Honeywell serves its customers through a worldwide network of sales offices and distributors. For application assistance, current specifications, pricing or name of the nearest Authorised Distributor, contact your local sales office or: INTERNET: www.honeywell.com/sensing E-mail: info.sc@honeywell.com ASIA PACIFIC Bulgaria Honeywell EOOD Phone: +(359) 2 79 40 27 FAX: +(359) 2 79 40 90 Norway Honeywell A/S Phone: +(47) 66 76 20 00 FAX: +(47) 66 76 20 90 Switzerland Honeywell AG Phone: +(41) 1 855 24 40 FAX: +(41) 1 855 24 45 Czech Republic Honeywell spol. s.r.o. Phone: +(420) 2 6112 3469/ 3424 FAX: +(420) 2 6112 3461 Poland Honeywell Sp. zo.o Phone: +(48) 22 606 0900 FAX: +(48) 22 606 0901 Turkey Honeywell Turkey A.S. Phone: +(90) 216 5756620 FAX: +(90) 216 5756637 Portugal Honeywell Portugal Lda Phone: +(351 21) 424 50 00 FAX: +(351 21) 424 50 99 United Kingdom Honeywell Control Systems Ltd Phone: +(44) 1698 481481 FAX: +(44) 1698 481276 Romania Honeywell Bucharest Phone: +(40) 1 2110076 FAX: +(40) 1 2103375 Mediterranean & African Distributors Honeywell SpA Phone: +(39) 2 921 46 232 FAX: +(39) 2 921 46 233 Control Products Asia Pacific Headquarters Phone: +(65) 6355-2828 Fax: +(65) 6445-3033 Australia Honeywell Limited Phone: +(61) 2-9370-4500 FAX: +(61) 2-9370-4525 Toll Free 1300-36-39-36 Toll Free Fax: 1300-36-04-70 Malaysia Honeywell Engineering Sdn Bhd Phone: +(60-3) 7958-4988 Fax: +(60-3) 7958-8922 New Zealand Honeywell Limited Phone: +(64-9) 623-5050 Fax: +(64-9) 623-5060 Toll Free (0800) 202-088 China - PRC - Beijing Honeywell China Inc. Phone: +(86-10) 8458-3280 Fax: +(86-10) 8458-3102 Philippines Honeywell Systems (Philippines) Inc. Phone: +(63-2) 636-1661 / 1662 Fax: +(63-2) 638-4013 China - PRC - Shanghai Honeywell China Inc. Phone: (86-21) 6237-0237 Fax: (86-21) 6237-1237 Singapore Honeywell South East Asia Phone: +(65) 6355-2828 Fax: +(65) 6445-3033 China - Hong Kong S.A.R. Honeywell Ltd. Phone: +(852) 2953-6412 Fax: +(852) 2953-6767 Thailand Honeywell Systems (Thailand) Ltd. Phone: +(662) 693-3099 FAX: +(662) 693-3085 Indonesia Honeywell Indonesia Pte Ltd. Phone: +(62) 21-535-8833 FAX: +(62) 21-5367 1008 India TATA Honeywell Ltd. Phone: +(91) 20 6870 445/ 446 Fax: +(91) 20 681 2243/ 687 5992 Japan Honeywell Inc Phone: +(81) 3 5440 1425 Fax: +(81) 3 5440 1368 South Korea Honeywell Korea Co Ltd Phone: +(822) 799-6167 Fax: +(822) 792-9013 Taiwan R.O.C. Honeywell Taiwan Ltd. Phone: +(886-2) 2245-1000 FAX: +(886-2) 2245-3242 EUROPE Austria Honeywell Austria GmbH Phone: +(43) 1 727 80 366/ 246 FAX: +(43) 1 727 80 337 Belgium Honeywell SA/NV Phone: +(32) 2 728 2522 FAX: +(32) 2 728 2502 Denmark Honeywell A/S Phone: +(45) 39 55 55 55 FAX: +(45) 39 55 55 58 Finland Honeywell OY Phone: +(358) 9 3480101 FAX: +(358) 9 34801375 France Honeywell SA Phone: +(33) 1 60 19 80 40 FAX: +(33) 1 60 19 81 73 Germany Honeywell AG Phone: +(49) 69 8064 444 FAX: +(49) 69 8064 442 Hungary Honeywell Kft. Phone: +(36 1) 451 4300 FAX: +(36 1) 451 4343 Italy Honeywell S.p.A. Phone: +(39) 02 92146 450/ 456 FAX: +(39) 02 92146 490 The Netherlands Honeywell B.V. Phone: +(31) 20 565 69 11 FAX: +(31) 20 565 66 00 Commonwealth of Independent States (CIS) Z.A.O. Honeywell Phone: +(7 095) 796 98 36 FAX: +(7 095) 796 98 93 Slovak Republic Honeywell s.r.o. Phone: +(421 7) 58247 403/ 400 FAX: +(421 7) 58247 415 South Africa (Republic of) Honeywell Southern Africa Honeywell S.A. Pty. Ltd Phone: +(27) 11 805 1201 FAX +(27) 11 805 1504 Spain Honeywell S.A. Phone: +(34) 91 313 6100 FAX: +(34) 91 313 6129 Sweden Honeywell AB Phone: +(46) 8 775 55 00 FAX: +(46) 8 775 56 00 Middle East Headquarters Honeywell Middle East Ltd. Phone: +(9712) 443 2119 FAX +(9712) 443 2536 NORTH AMERICA Canada Honeywell LTD Phone: 1-800-737-3360 FAX: 1-800-565-4130 USA Honeywell Control Products, International Headquarters Phone: 1-800-537-6945 1-815-235-6847 FAX: 1-815-235-6545 E-mail: info.sc@honeywell.com LATIN AMERICA Argentina Honeywell S.A.I.C. Phone: +(54-11) 4383-3637 FAX: +(54-11) 4325-6470 Brazil Honeywell do Brasil & Cia Phone: +(55-11) 7266-1900 FAX: +(55-11) 7266-1905 Chile Honeywell Chile, S.A. Phone: +(56-2) 233-0688 FAX: +(56-2) 231-6679 Columbia Honeywell Columbia, S.A. Phone: +(57-1) 623-3239/ 3051 FAX: +(57-1) 623-3395 Ecuador Honeywell S.A. Phone: +(593-2) 981-560/1 FAX: +(593-2) 981-562 Mexico Honeywell S.A. de C.V. Phone: +(52) 55 5259-1966 FAX: +(52) 55 5570-2985 Puerto Rico Honeywell Inc. Phone: +(809) 792-7075 FAX: +(809) 792-0053 Venezuela Honeywell CA Phone: +(58-2) 238-0211 FAX: +(58-2) 238-3391 This publication does not constitute a contract between Honeywell and its customers. The contents may be changed at any time without notice. It is the customer's responsibility to ensure safe installation and operation of the products. Detailed mounting drawings of all products illustrated are available on request. (c) Honeywell 2002. All rights reserved. Honeywell Automation & Control Products Newhouse Industrial Estate Motherwell ML1 5SB Scotland, UK www.honeywell.com/sensing 100455-EN Issue 1 09/02 UK07 GLO Printed in the United Kingdom on environmentally friendly paper