: JEDEC DO-27, moulded plastic.
: Plated axial leads, solderable
per MIL-STD-202, Method 208.
: Colour band denotes cathode end.
: Any
: 1.1 grams (0.04 ounce)
1N5400 THRU 1N5408
3 AMP SILICON RECTIFIERS
VOLTAGE
50 to 1000 Volts
CURRENT
3.0 Amps
Low cost construction utilizing void - free
moulded plastic technique
Plastic package has Underwriters Laboratories
Flammability Classification 94V-0
3.0 Ampere operation at TL = 105°C
with no thermal runaway
High surge current capability
Typical IR less than 0.1µA
High temperature soldering capability :
250°C/10 seconds/9.5mm (.375in.) lead length at
2.3kg (5lb) tension
Easily cleaned with Freon, Alcohol, Chlorothene
and other similar solvents
FEATURES
MECHANICAL DATA
Case
Terminals
Polarity
Mounting Position
Weight
DIMENSIONS
- millimeters (inches)
25.4 (1.0)
min.
9.5 (.375)
7.2 (.285)
5.3 (.210)
4.8 (.190)
1.3 (.052)
1.2 (.048)
Cathode Band
25.4 (1.0)
min.
TECHNICAL SPECIFICATION
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%.
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage to TA = 150°C
Maximum Average Forward Rectified Current
12.7mm (.5in.) Lead Length at TL = 105°C
V
V
A
A
Peak Forward Surge Current, 8.3 ms single half
sine - wave superimposed on rated load
µA
Storage Temperature Range
°C
°C
1N5400 1N5401 1N5402 1N5404 1N5406 1N5407 1N5408
50
50
100
100
200
200
400
400
600
600
800
800
1000
1000
35 70 140 280 420 560 700
Maximum Instantaneous Forward Voltage at 3.0A
Operating Temperature Range
3.0
200
1.2
10
- 50 to + 170
- 50 to + 175
V
T = 150°C
Maximum Reverse Current at Rated
DC Blocking Voltage A
Typical Junction Capacitance (see Note 1)
T = 25°C
A
Typical Thermal Resistance (see Note 2)
500
°C/W
pF
V
Notes :
1. Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts
2. Thermal Resistance from Junction to Ambient
µA
15
VRMS
VDC
IF(AV)
IFSM
IR
TJ
TSTG
VRRM
RTHja
CJ
VF
Maximum Full load Reverse Current Full Cycle
Average, 12.7mm (.5in.) Lead Length at TL = 105°C
Symbols
30
500
IR(AV) µA
Units
DO-27
Reformatted by Anglia 9851
RATING AND CHARACTERISTIC CURVES
AVERAGE FORWARD RECTIFIED
CURRENT, AMPERES
FIG. 1 - FORWARD CURRENT DERATING CURVE
40 60 80 100 120 140 160 180
0
2.0
3.0
1.0
TEMPERATURE, °C
1N5400 THRU 1N5408
4.0
5.0
6.0
TA = Ambient temperature
P.C. board mounting
9.5mm (.375in.) lead length
T
L
= Both leads to heat sink
12.7mm (.5in.) lead length
FIG. 3 - TYPICAL INSTANTANEOUS FORWARD
CHARACTERISTICS
INSTANTANEOUS FORWARD CURRENT,
AMPERES
.01
.03
0.1
10
0.4 0.6 0.8 1.0 1.2 1.4 1.6
INSTANTANEOUS FORWARD
VOLTAGE, VOLTS
0.3
1.0
3.0
30
100
1.8
TJ = 25°C
Pulse width = 300µs
2% duty cycle
FIG. 4 - TYPICAL JUNCTION CAPACITANCE
1
10
100
1 10 100
REVERSE VOLTAGE, VOLTS
CAPACITANCE, pF
T = 25°C
f = 1MHz
VSIG = 50mVp-p
2
5
20
50
2 5 20 50
J
FIG. 2 - MAXIMUM NON-REPETITIVE PEAK
FORWARD SURGE CURRENT
10
100
200
110 100
NUMBER OF CYCLES AT 60Hz
PEAK FORWARD SURGE
CURRENT, AMPERES
2 5 20 50
20
50
TL = 105°C
8.3ms single half sine-wave
(JEDEC) method
PERCENT OF RATED PEAK REVERSE
VOLTAGE, %
FIG. 5 - TYPICAL REVERSE CHARACTERISTICS
INSTANTANEOUS REVERSE
CURRENT, MICROAMPERES
.01
0.1
10
0 20 40 60 80 100 120
1.0
TJ = 25°C
TJ = 100°C
.03
0.3
3.0
140
Reformatted by Anglia 9851
