Revision: November 16, 2011, 15:06
©2011 Littelfuse, Inc.
Specifications are subject to change without notice.
Transient Voltage Suppression Diodes
1
Axial Leaded – 400W > P4KE series
P4KE Series
Please refer to http://www.Littelfuse.com/series/P4KE.html for current information.
P4KE Series
TVS devices are ideal for the protection of I/O interfaces,
VCC bus and other vulnerable circuits used in telecom,
computer, industrial and consumer electronic applications.
Applications
Features
The P4KE Series is designed specifically to protect
sensitive electronic equipment from voltage transients
induced by lightning and other transient voltage events.
Description
Parameter Symbol Value Unit
Peak Pulse Power Dissipation by
10x1000μs test waveform (Fig.1)
(Note 1)
PPPM 400 W
Steady State Power Dissipation on
inifinite heat sink at TL=75ºC (Fig. 5) PD1. 5 W
Peak Forward Surge Current, 8.3ms
Single Half Sine Wave Unidirectional
only (Note 2)
IFSM 40 A
Maximum Instantaneous Forward
Voltage at 25A for Unidirectional
only (Note 3)
VF3.5/5.0 V
Operating Junction and Storage
Temperature Range TJ, TSTG -55 to 175 °C
Typical Thermal Resistance Junction
to Lead RuJL 60 °C/W
Typical Thermal Resistance Junction
to Ambient RuJA 10 0 °C/W
Notes:
1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2.
2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per
minute maximum.
3. VF<3.5V for devices of VBR _
<
200V and VF<5.0V for devices of VBR _
>
201V.
Maximum Ratings and Thermal Characteristics
(TA=25OC unless otherwise noted)
Agency Approvals
• Halogen-Free
• RoHS compliant
• Typical maximum
temperature coefficient
ΔVBR = 0.1% x VBR@25°C x ΔT
• Glass passivated chip
junction in DO-41 Package
• 400W peak pulse
capability at 10×1000μs
waveform, repetition rate
(duty cycles):0.01%
• Fast response time:
typically less than 1.0ps
from 0 Volts to BV min
• Excellent clamping
capability
• Low incremental surge
resistance
• Typical IR less than 1μA
above 13V
• High temperature
soldering guaranteed:
260°C/40 seconds /
0.375”,(9.5mm) lead
length, 5 lbs., (2.3kg)
tension
• Plastic package has
Underwriters Laboratory
Flammability classification
94V-O
• Matte Tin Lead–free plated
AGENCY AGENCY FILE NUMBER
E230531
P4KE Series
RoHS
Pb
Revision: November 16, 2011, 15:06
©2011 Littelfuse, Inc.
Specifications are subject to change without notice.
Transient Voltage Suppression Diodes
2
Axial Leaded – 400W > P4KE series
P4KE Series
Please refer to http://www.Littelfuse.com/series/P4KE.html for current information.
Electrical Characteristics
Part
Number
(Uni)
Part
Number
(Bi)
Reverse
Stand off
Voltage VR
(Volts)
Breakdown
Voltage
VBR@ IT (V)
Test
Current
IT
(mA)
Maximum
Clamping
Voltage
VC @ Ipp
(V)
Maximum
Peak
Pulse
Current Ipp
(A)
Maximum
Reverse
Leakage
IR @ VR(µA)
Agency
Approval
MIN MAX
P4KE6.8A P4KE6.8CA 5.80 6.45 7. 1 4 10 10.5 39.00 1000 X
P4KE7.5A P4KE7.5CA 6.40 7. 1 3 7.88 10 11. 3 36.30 500 X
P4KE8.2A P4KE8.2CA 7.02 7.79 8.61 10 12.1 33.90 200 X
P4KE9.1A P4KE9.1CA 7.78 8.65 9.55 1 13.4 30.60 50 X
P4KE10A P4KE10CA 8.55 9.50 10.50 1 14.5 28.30 10 X
P4KE11A P4KE11CA 9.40 10.50 11.60 1 15.6 26.30 5 X
P4KE12A P4KE12CA 10.20 11.40 12.60 1 16.7 24.60 5 X
P4KE13A P4KE13CA 11. 10 12.40 13.70 1 18.2 22.50 1 X
P4KE15A P4KE15CA 12.80 14.30 15.80 1 21.2 19.30 1 X
P4KE16A P4KE16CA 13.60 15.20 16.80 1 22.5 18.20 1 X
P4KE18A P4KE18CA 15.30 1 7. 1 0 18.90 1 25.5 16.10 1 X
P4KE20A P4KE20CA 1 7. 1 0 19.00 21.00 1 27.7 14.80 1 X
P4KE22A P4KE22CA 18.80 20.90 23.10 1 30.6 13.40 1 X
P4KE24A P4KE24CA 20.50 22.80 25.20 1 33.2 12.30 1 X
P4KE27A P4KE27CA 23.10 25.70 28.40 1 37.5 10.90 1 X
P4KE30A P4KE30CA 25.60 28.50 31.50 1 41.4 9.90 1 X
P4KE33A P4KE33CA 28.20 31.40 34.70 1 45.7 9.00 1 X
P4KE36A P4KE36CA 30.80 34.20 37.80 1 49.9 8.20 1 X
P4KE39A P4KE39CA 33.30 37.10 41.00 1 53.9 7.60 1 X
P4KE43A P4KE43CA 36.80 40.90 45.20 1 59.3 6.90 1 X
P4KE47A P4KE47CA 40.20 44.70 49.40 1 64.8 6.30 1 X
P4KE51A P4KE51CA 43.60 48.50 53.60 1 70.1 5.80 1 X
P4KE56A P4KE56CA 47.80 53.20 58.80 1 77.0 5.30 1 X
P4KE62A P4KE62CA 53.00 58.90 65.10 1 85.0 4.80 1 X
P4KE68A P4KE68CA 58.10 64.60 71.40 1 92.0 4.50 1 X
P4KE75A P4KE75CA 64.10 71.30 78.80 1 103.0 4.00 1 X
P4KE82A P4KE82CA 70.10 77.90 86.10 1 113.0 3.60 1 X
P4KE91A P4KE91CA 77.80 86.50 95.50 1 125.0 3.30 1 X
P4KE100A P4KE100CA 85.50 95.00 105.00 1 137.0 3.00 1 X
P4KE110A P4KE110CA 94.00 105.00 116.00 1 152.0 2.70 1 X
P4KE120A P4KE120CA 102.00 114.00 126.00 1 165.0 2.50 1 X
P4KE130A P4KE130CA 111.0 0 124.00 137.00 1 179.0 2.30 1 X
P4KE150A P4KE150CA 128.00 143.00 158.00 1 207.0 2.00 1 X
P4KE160A P4KE160CA 136.00 152.00 168.00 1 219.0 1.90 1 X
P4KE170A P4KE170CA 145.00 162.00 179.00 1 234.0 1.80 1 X
P4KE180A P4KE180CA 154.00 171.00 189.00 1 246.0 1.70 1 X
P4KE200A P4KE200CA 171.00 190.00 210.00 1 274.0 1.50 1 X
P4KE220A P4KE220CA 185.00 209.00 231.00 1 328.0 1.30 1 X
P4KE250A P4KE250CA 214.00 237.00 263.00 1 344.0 1.20 1 X
P4KE300A P4KE300CA 256.00 285.00 315.00 1 414.0 1. 0 0 1 X
P4KE350A P4KE350CA 300.00 332.00 368.00 1 482.0 0.85 1 X
P4KE400A P4KE400CA 342.00 380.00 420.00 1 548.0 0.75 1 X
P4KE440A P4KE440CA 376.00 418.00 462.00 1 602.0 0.68 1 X
P4KE480A P4KE480CA 408.00 456.00 504.00 1 658.0 0.61 1
P4KE510A P4KE510CA 434.00 485.00 535.00 1 698.0 0.57 1
P4KE530A P4KE530CA 477.00 503.50 556.50 1 725.0 0.55 1
P4KE540A P4KE540CA 486.00 513.00 567.00 1 740.0 0.54 1
P4KE550A P4KE550CA 495.00 522.50 577.50 1 760.0 0.52 1
For bidirectional type having VR of 10 volts and less, the IR limit is double.
For parts without A , the VBR is ± 10% and VC is 5% higher than with A parts
Revision: November 16, 2011, 15:06
©2011 Littelfuse, Inc.
Specifications are subject to change without notice.
Transient Voltage Suppression Diodes
3
Axial Leaded – 400W > P4KE series
P4KE Series
Please refer to http://www.Littelfuse.com/series/P4KE.html for current information.
Ratings and Characteristic Curves (TA=25°C unless otherwise noted)
td - Pulse Width (sec.)
P
PPM
- Peak Pulse Power (KW)
0.1µs 1.0µs 10µs 100µs 1.0ms 10ms
0.1
1
10
100
TA- Ambient Temperature (˚C)
Peak Pulse Power (P
PP
) or Current (I
PP
)
Derating in Percentage, %
0
0
25
25
50
50
75
75
100
100
125 150 175 200
Figure 1 - Peak Pulse Power Rating Figure 2 - Pulse Derating Curve
IPPM- Peak Pulse Current, % IRSM
0
0
50
100
150
1.0 2.0 3.0 4.0
tr=10µsec
Peak Value
IPPM
IPPM
2
TJ=25°C
Pulse Width(td) is defined
as the point where the peak
current decays to 50% of IPPM
10/1000µsec. Waveform
as defined by R.E.A
td
t-Time (ms)
Half Value
IPPM ( )
1
10
100
1000
10000
1.010.0100.0 1000.0
VBR - Reverse Breakdown Voltage (V)
Cj (pF)
Tj=25C
f=1.0MHz
Vsig=50mVp-p
Uni-directional VR=0V
Bi-directional VR=0V
Uni-directional @ V
R
Bi-directional @VR
Figure 3 - Pulse Waveform Figure 4 - Typical Junction Capacitance Uni-Directional
Figure 5 - Steady Pulse Derating Curve
0
0.5
1.0
1.5
0255075100 125150 175 200
Steady Sate Power Dissipation (W)
L = 0.375" (9.5mm)
Lead Lengths
TL-Lead Temperature(ºC)
0
5
10
15
20
25
30
35
40
45
11
01
00
Number of Cycles at 60 Hz
IFSM - Peak Forward Surge Current
(A)
Figure 6 - Maximum Non-Repetitive Peak Forward
Surge Current Uni-Directional Only
Revision: November 16, 2011, 15:06
©2011 Littelfuse, Inc.
Specifications are subject to change without notice.
Transient Voltage Suppression Diodes
4
Axial Leaded – 400W > P4KE series
P4KE Series
Please refer to http://www.Littelfuse.com/series/P4KE.html for current information.
Physical Specifications
Weight 0.012oz., 0.3g
Case JEDEC DO-204AL (DO-41) molded
plastic body over passivated junction.
Polarity Color band denotes the cathode except
Bipolar.
Terminal Matte Tin axial leads, solderable per
JESD22-B102D.
Dimensions
Dimensions Inches Millimeters
Min Max Min Max
A1.000 - 25.40 -
B 0.160 0.205 4.10 5.20
C 0.028 0.034 0.71 0.86
D 0.080 0.107 2.00 2.70
D
AA
C
B
DO-204AL (DO-41)
Environmental Specifications
Temperature Cycle JESD22-A104
Pressure Cooker JESD 22-A102
High Temp. Storage JESD22-A103
HTRB JESD22-A108
Thermal Shock JESD22-A106
Soldering Parameters
Temperature (T)
Time (t)
Ts(min)
Ts(max)
TL
TP
ts
Preheat
tL
tp
Ramp-up Critical Zone
TL to TP
Ramp-down
t 25˚C to Peak
25˚C
Reflow Condition Lead–free assembly
Pre Heat
- Temperature Min (Ts(min))150°C
- Temperature Max (Ts(max))200°C
- Time (min to max) (ts)60 – 180 secs
Average ramp up rate (Liquidus Temp
(TL) to peak 3°C/second max
TS(max) to TL - Ramp-up Rate 3°C/second max
Reflow - Temperature (TL) (Liquidus) 217°C
- Time (min to max) (ts)60 – 150 seconds
Peak Temperature (TP)260+0/-5 °C
Time within 5°C of actual peak
Temperature (tp)20 – 40 seconds
Ramp-down Rate 6°C/second max
Time 25°C to peak Temperature (TP)8 minutes Max.
Do not exceed 280°C
Flow/Wave Soldering (Solder Dipping)
Peak Temperature : 260OC
Dipping Time : 5 seconds
Soldering : 1 time
Revision: November 16, 2011, 15:06
©2011 Littelfuse, Inc.
Specifications are subject to change without notice.
Transient Voltage Suppression Diodes
5
Axial Leaded – 400W > P4KE series
P4KE Series
Please refer to http://www.Littelfuse.com/series/P4KE.html for current information.
Part Numbering System
Packaging
Part Number Component
Package Quantity Packaging
Option Packaging Specification
P4KExxxXX DO-204AL 5000 Tape & Reel EIA STD RS-296E
P4KExxxXX-B DO-204AL 500 BOX Littelfuse Concord Packing Spec. DM-0016
VOLTAGE CODE
(Refer to the Electrical Characteristics table)
TYPE CODE:
A Uni-Directional (5% Voltage Tolerance)
CA Bi-Directional
OPTION CODE:
BLANK Reel Tape
-B Bulk Packaging
SERIES CODE
P4KE xxx XX X
Part Marking System
F
P4KEXXX
Product Type
Littelfuse Logo
Cathode Band
Trace Code Marking
YYWW
Tape and Reel Specification
2.062
2.56
0.40
2.75
0.048
(330.2)
Recess Depth Max. 0.75 (19.05)
Off Center
either side
0.039(1.0)
Dimensions are in
inches/mm
0.25
(65.00)
(10.16)
(52.37)
(6.35)
(1.22)
(69.85)
13.0
(76.2)
3.0
0.68
(17. 27)
Direction of Feed