PHOTOSWITCHR Photoelectric Sensors
1–137
Description
The
42CB family of photoelectric
sensors shares many of the same
features as the 42CA general purpose
line but of
fer additional enhancements
in electrical, mechanical, and optical
characteristics. These include a faster
response time, both light/dark operate
modes, right angle package, dual LED
outputs, sensitivity adjustment, and
increased sensing range.
The 42CB is available in three sensing
modes to cover typical applications.
The infrared light source provides
excellent range for the sensor size.
DC operation ensures compatibility with
measurement and control circuits found
in today’
s factory automation systems.
Signaling of target detection is made via
either an NPN or PNP output. This
output is short-circuit protected to
protect the sensor from possible
damage. Light or dark operate condition
is selected by wiring not model number
.
A single turn adjustment is included to
set the optical sensitivity of the sensor
.
T
wo LED indicators are provided to
indicate both power and output status of
the sensor.
As an alternative to the 18mm
cylindrical package, Rockwell
Automation/Allen-Bradley also of
fers
the RightSight
t
photoelectric sensor
.
That product is of a right angle design
to conserve space in many
applications. Refer to page
1–31
for
further information on this product.
General Specifications
Features
•Right angle 18mm package
•Wide selection of sensing modes
•24VDC operation
•
NPN or PNP outputs
•
Selectable light/dark operate modes
•Fast 500µ
s response time
•V
ariety of connection types
General Information
Typical
Wiring Diagrams
page 1–138.
.
Dimensions page 1–138
. . . . . . . . . . . . .
Sensing Modes
Retroreflective page
1–139.
. . . . . . . . .
Polarized Retroreflective
page 1–140
. .
Standard Dif
fuse page 1–141
. . . . . . . .
Accessories
Quick-Disconnect Cables page 5–1
. . .
Mounting Assemblies page 1–301
. . . .
Reflectors, Reflective T
ape page 1–311
42CB
Light Source
Unit Protection
Supply Voltage
Current Consumption
Output Type
Output Mode
Output Rating
Response Time
Housing Material
Lens Material
LED Indicators
Connection Types
Supplied Accessories
Optional Accessories
Operating Environment
Vibration
Shock
Operating Temperature
Relative Humidity
Approvals
Infrared 880nm, visible red on polarised retroreflective model
Reverse polarity, output short-circuit protection (SCP)
10–30V DC
20mA maximum
NPN or PNP
Light or dark operate selectable via wiring
100mA @ 28V DC
500µs
Polyamide
Acrylic
See User Interface on page 1–138
2m 300V cable, 4-pin DC micro QD
None
Mounting brackets, reflectors, cordsets
NEMA 3, 4X, 12, 13 (IP65)
10–55Hz, 1mm amplitude, Meets or exceeds IEC 60947–5–2
30g with 1ms pulse duration, Meets or exceeds IEC 60947–5–2
–25_C to +70_C (–13_F to +158_F)
35…85%
UL listed, CSA certified, CE marked for all applicable directives