Features
■ Radial Leaded Devices
■ Cured, fl ame retardant epoxy polymer
insulating material meets UL 94V-0
requirements
■ RoHS compliant*
■ Agency recognition:
Applications
Almost anywhere there is a low voltage power
supply and a load to be protected, including:
■ Computers & peripherals
■ General electronics
■ Automotive applications
MF-R Series - PTC Resettable Fuses
*RoHS Directive 2002/95/EC Jan 27, 2003 including Annex.
Specifi cations are subject to change without notice.
Customers should verify actual device performance in their specifi c applications.
Environmental Characteristics
Operating/Storage Temperature ...................... -40 °C to +85 °C
Maximum Device Surface Temperature
in Tripped State ............................................ 125 °C
Passive Aging .................................................. +85 °C, 1000 hours .......................................... ±5 % typical resistance change
Humidity Aging ................................................ +85 °C, 85 % R.H. 1000 hours ........................ ±5 % typical resistance change
Thermal Shock ................................................ -40 °C to +85 °C, 10 times .............................. ±10 % typical resistance change
Solvent Resistance .......................................... MIL-STD-202, Method 215 .............................. No change
Vibration .......................................................... MIL-STD-883C, Method 2007.1, ..................... No change
Condition A
Test Procedures And Requirements For Model MF-R Series
Test Test Conditions Accept/Reject Criteria
Visual/Mech. .................................................... Verify dimensions and materials ...................... Per MF physical description
Resistance ....................................................... In still air @ 23 °C ............................................. Rmin ≤ R ≤ Rmax
Time to Trip ...................................................... 5 times Ihold, Vmax, 23 °C .............................. T ≤ max. time to trip (seconds)
Hold Current .................................................... 30 min. at Ihold ................................................ No trip
Trip Cycle Life .................................................. Vmax, Imax, 100 cycles ................................... No arcing or burning
Trip Endurance ................................................ Vmax, 48 hours ................................................ No arcing or burning
UL File Number ............................................... E 174545
CSA File Number ............................................. CA 110338
TÜV File Number ............................................. R2057213
Electrical Characteristics
Model V max.
Volts
I max.
Amps
Ihold Itrip Initial
Resistance
1 Hour (R1)
Post-Trip
Resistance
Max. Time
to Trip
Tripped
Power
Dissipation
Amperes
at 23 °C
Ohms
at 23 °C
Ohms
at 23 °C
Amperes
at 23 °C
Seconds
at 23 °C
Watts
at 23 °C
Hold Trip Min. Max. Max. Typ.
MF-R005** 60 40 0.05 0.10 7.3 11.1 22.0 0.5 5.0 0.22
MF-R010 60 40 0.10 0.20 2.50 4.50 7.50 0.5 4.0 0.38
MF-R017 60 40 0.17 0.34 2.00 3.20 8.00 0.85 3.0 0.48
MF-R020 60 40 0.20 0.40 1.50 2.84 4.40 1.0 2.2 0.40
MF-R025 60 40 0.25 0.50 1.00 1.95 3.00 1.25 2.5 0.45
MF-R030 60 40 0.30 0.60 0.76 1.36 2.10 1.5 3.0 0.50
MF-R040 60 40 0.40 0.80 0.52 0.86 1.29 2.0 3.8 0.55
MF-R050 60 40 0.50 1.00 0.41 0.77 1.17 2.5 4.0 0.75
MF-R065 60 40 0.65 1.30 0.27 0.48 0.72 3.25 5.3 0.90
MF-R075 60 40 0.75 1.50 0.18 0.40 0.60 3.75 6.3 0.90
MF-R090 60 40 0.90 1.80 0.14 0.31 0.47 4.5 7.2 1.00
MF-R090-0-9 30 40 0.90 1.80 0.07 0.12 0.22 4.5 5.9 0.60
MF-R110 30 40 1.10 2.20 0.10 0.18 0.27 5.5 6.6 0.70
MF-R135 30 40 1.35 2.70 0.065 0.115 0.17 6.75 7.3 0.80
MF-R160 30 40 1.60 3.20 0.055 0.105 0.15 8.0 8.0 0.90
MF-R185 30 40 1.85 3.70 0.040 0.07 0.11 9.25 8.7 1.00
MF-R250 30 40 2.50 5.00 0.025 0.048 0.07 12.5 10.3 1.20
MF-R250-0-10 30 40 2.50 5.00 0.025 0.048 0.07 12.5 10.3 1.20
MF-R300 30 40 3.00 6.00 0.020 0.05 0.08 15.0 10.8 2.00
MF-R400 30 40 4.00 8.00 0.010 0.03 0.05 20.0 12.7 2.50
MF-R500 30 40 5.00 10.00 0.010 0.03 0.05 25.0 14.5 3.00
MF-R600 30 40 6.00 12.00 0.005 0.02 0.04 30.0 16.0 3.50
MF-R700 30 40 7.00 14.00 0.005 0.02 0.03 35.0 17.5 3.80
MF-R800 30 40 8.00 16.00 0.005 0.02 0.03 40.0 18.8 4.00
MF-R900 30 40 9.00 18.00 0.005 0.01 0.02 45.0 ***20.0 4.20
MF-R1100 16 100 11.00 22.00 0.003 0.01 0.014 40.0 20.0 4.50
R
0180T
1
10
**CSA approval pending. ***Tested at 40 amps
*RoHS COMPLIANT
Specifi cations are subject to change without notice.
Customers should verify actual device performance in their specifi c applications.
MF-R Series - PTC Resettable Fuses
Product Dimensions (see next page for outline drawing)
DIMENSIONS: MM
(INCHES)
Additional Features
■ Bulk packaging, tape and reel and Ammo-Pak available on most models
Model A B C D E Physical Characteristics
Max. Max. Nom. Tol. ± Min. Max. Style Lead Dia. Material
MF-R005 8.0 8.3 5.1 0.7 7.6 3.1
4 0.405
Sn/NiCu
(0.315) (0.327) (0.201) (0.028) (0.299) (0.122) (0.016)
MF-R010 7.4 12.7 5.1 0.7 7.6 3.1
1 0.51
Sn/NiCu
(0.291) (0.5) (0.201) (0.028) (0.299) (0.122) (0.020)
MF-R017 7.4 12.7 5.1 0.7 7.6 3.1
1 0.51
Sn/CuFe
(0.291) (0.5) (0.201) (0.028) (0.299) (0.122) (0.020)
MF-R020 7.4 12.7 5.1 0.7 7.6 3.1
1 0.51
Sn/CuFe
(0.291) (0.5) (0.201) (0.028) (0.299) (0.122) (0.020)
MF-R025 7.4 12.7 5.1 0.7 7.6 3.1
1 0.51
Sn/CuFe
(0.291) (0.5) (0.201) (0.028) (0.299) (0.122) (0.020)
MF-R030 7.4 13.4 5.1 0.7 7.6 3.1
1 0.51
Sn/CuFe
(0.291) (0.528) (0.201) (0.028) (0.299) (0.122) (0.020)
MF-R040 7.4 13.7 5.1 0.7 7.6 3.1
1 0.51
Sn/CuFe
(0.291) (0.539) (0.201) (0.028) (0.299) (0.122) (0.020)
MF-R050 7.9 13.7 5.1 0.7 7.6 3.1
1 0.51
Sn/Cu
(0.311) (0.539) (0.201) (0.028) (0.299) (0.122) (0.020)
MF-R065 9.7 15.2 5.1 0.7 7.6 3.1
1 0.51
Sn/Cu
(0.382) (0.598) (0.201) (0.028) (0.299) (0.122) (0.020)
MF-R075 10.4 16.0 5.1 0.7 7.6 3.1
1 0.51
Sn/Cu
(0.409) (0.630) (0.201) (0.028) (0.299) (0.122) (0.020)
MF-R090 11.7 16.7 5.1 0.7 7.6 3.1
1 0.51
Sn/Cu
(0.461) (0.657) (0.201) (0.028) (0.299) (0.122) (0.020)
MF-R090-0-9 7.4 12.2 5.1 0.7 7.6 3.0
3 0.51
Sn/CuFe
(0.291) (0.480) (0.201) (0.028) (0.299) (0.118) (0.020)
MF-R110 8.9 14.0 5.1 0.7 7.6 3.0
1 0.51
Sn/Cu
(0.350) (0.551) (0.201) (0.028) (0.299) (0.118) (0.020)
MF-R135 8.9 18.9 5.1 0.7 7.6 3.0
1 0.51
Sn/Cu
(0.350) (0.744) (0.201) (0.028) (0.299) (0.118) (0.020)
MF-R160 10.2 16.8 5.1 0.7 7.6 3.0
1 0.51
Sn/Cu
(0.402) (0.661) (0.201) (0.028) (0.299) (0.118) (0.020)
MF-R185 12.0 18.4 5.1 0.7 7.6 3.0
1 0.51
Sn/Cu
(0.472) (0.724) (0.201) (0.028) (0.299) (0.118) (0.020)
MF-R250 12.0 18.3 5.1 0.7 7.6 3.0
2 0.81
Sn/Cu
(0.472) (0.720) (0.201) (0.028) (0.299) (0.118) (0.032)
MF-R250-0-10 12.0 18.3 5.1 0.7 7.6 3.0
3 0.51
Sn/CuFe
(0.472) (0.720) (0.201) (0.028) (0.299) (0.118) (0.020)
MF-R300 12.0 18.3 5.1 0.7 7.6 3.0
2 0.81
Sn/Cu
(0.472) (0.720) (0.201) (0.028) (0.299) (0.118) (0.032)
MF-R400 14.4 24.8 5.1 0.7 7.6 3.0
2 0.81
Sn/Cu
(0.567) (0.976) (0.201) (0.028) (0.299) (0.118) (0.032)
MF-R500 17.4 24.9 10.2 0.7 7.6 3.0
2 0.81
Sn/Cu
(0.685) (0.980) (0.402) (0.028) (0.299) (0.118) (0.032)
MF-R600 19.3 31.9 10.2 0.7 7.6 3.0
2 0.81
Sn/Cu
(0.760) (1.256) (0.402) (0.028) (0.299) (0.118) (0.032)
MF-R700 22.1 29.8 10.2 0.7 7.6 3.0
2 0.81
Sn/Cu
(0.870) (1.173) (0.402) (0.028) (0.299) (0.118) (0.032)
MF-R800 24.2 32.9 10.2 0.7 7.6 3.0
2 0.81
Sn/Cu
(0.953) (1.295) (0.402) (0.028) (0.299) (0.118) (0.032)
MF-R900 24.2 32.9 10.2 0.7 7.6 3.0
2 0.81
Sn/Cu
(0.953) (1.295) (0.402) (0.028) (0.299) (0.118) (0.032)
MF-R1100 24.2 32.9 10.2 0.7 7.6 3.0
2 0.81
Sn/Cu
(0.953) (1.295) (0.402) (0.028) (0.299) (0.118) (0.032)
Packaging options: BULK: All models = 500 pcs. per bag.
TAPE & REEL: MF-R005-MF-R160 - 12.7 mm device pitch = 3000 pcs. per reel;
MF-R185-MF-R400 - 25.4mm device pitch = 1500 pcs. per reel; MF-R250-0-10 = 1500 pcs. per reel.
AMMO-PACK: MF-R005-MF-R160 - 12.7 mm device pitch = 2000 pcs. per reel;
MF-R185-MF-R400 - 25.4 mm device pitch = 1000 pcs. per reel; MF-R090-0-9 & MF-R250-0-10 =
2000 pcs. per reel.
0.405 (26AWG)
0.51 (24AWG)
0.81 (20AWG)
Specifi cations are subject to change without notice.
Customers should verify actual device performance in their specifi c applications.
MF-R Series - PTC Resettable Fuses
Product Dimensions (see previous page for dimensions)
AE
B
D
B
D
C
Style 1
AE
B
D
C
Style 2
AE
C
Style 3 Style 4
AE
B
D
C
NOTE: Kinked lead option is
available for board standoff.
Contact factory for details.
NOTE: Also available with
straight leads. Contact
factory for details.
Thermal Derating Chart - Ihold / Itrip (Amps)
Model Ambient Operating Temperature
-40 ºC -20 ºC 0 ºC 23 ºC 40 ºC 50 ºC 60 ºC 70 ºC 85 ºC
MF-R005 0.08 / 0.16 0.07 / 0.14 0.06 / 0.12 0.05 / 0.10 0.04 / 0.08 0.04 / 0.08 0.03 / 0.07 0.03 / 0.07 0.02 / 0.05
MF-R010 0.16 / 0.32 0.14 / 0.28 0.12 / 0.24 0.10 / 0.20 0.08 / 0.16 0.07 / 0.14 0.06 / 0.12 0.05 / 0.10 0.04 / 0.08
MF-R017 0.26 / 0.52 0.23 / 0.46 0.20 / 0.40 0.17 / 0.34 0.14 / 0.28 0.12 / 0.24 0.11 / 0.22 0.09 / 0.18 0.07 / 0.14
MF-R020 0.31 / 0.62 0.27 / 0.54 0.24 / 0.48 0.20 / 0.40 0.16 / 0.32 0.14 / 0.28 0.13 / 0.26 0.11 / 0.22 0.08 / 0.16
MF-R025 0.39 / 0.78 0.34 / 0.68 0.30 / 0.60 0.25 / 0.50 0.20 / 0.40 0.18 / 0.36 0.16 / 0.32 0.14 / 0.28 0.10 / 0.20
MF-R030 0.47 / 0.94 0.41 / 0.82 0.36 / 0.72 0.30 / 0.60 0.24 / 0.48 0.22 / 0.44 0.19 / 0.38 0.16 / 0.32 0.12 / 0.24
MF-R040 0.62 / 1.24 0.54 / 1.08 0.48 / 0.96 0.40 / 0.80 0.32 / 0.64 0.29 / 0.58 0.25 / 0.50 0.22 / 0.44 0.16 / 0.32
MF-R050 0.78 / 1.56 0.68 / 1.36 0.60 / 1.20 0.50 / 1.00 0.41 / 0.82 0.36 / 0.72 0.32 / 0.64 0.27 / 0.54 0.20 / 0.40
MF-R065 1.01 / 2.02 0.88 / 1.76 0.77 / 1.54 0.65 / 1.30 0.53 / 1.06 0.47 / 0.94 0.41 / 0.82 0.35 / 0.70 0.26 / 0.52
MF-R075 1.16 / 2.32 1.02 / 2.04 0.89 / 1.78 0.75 / 1.50 0.61 / 1.22 0.54 / 1.08 0.47 / 0.94 0.41 / 0.82 0.30 / 0.60
MF-R090 1.40 / 2.80 1.22 / 2.44 1.07 / 2.14 0.90 / 1.80 0.73 / 1.46 0.65 / 1.30 0.57 / 1.14 0.49 / 0.98 0.36 / 0.72
MF-R090-0-9 1.40 / 2.80 1.22 / 2.44 1.07 / 2.14 0.90 / 1.80 0.73 / 1.46 0.65 / 1.30 0.57 / 1.14 0.49 / 0.98 0.36 / 0.72
MF-R110 1.60 / 3.20 1.43 / 2.86 1.27 / 2.54 1.10 / 2.20 0.91 / 1.82 0.85 / 1.70 0.75 / 1.50 0.67 / 1.34 0.57 / 1.14
MF-R135 1.96 / 3.92 1.76 / 3.52 1.55 / 3.10 1.35 / 2.70 1.12 / 2.24 1.04 / 2.08 0.92 / 1.84 0.82 / 1.64 0.70 / 1.40
MF-R160 2.32 / 4.64 2.08 / 4.16 1.84 / 3.68 1.60 / 3.20 1.33 / 2.66 1.23 / 2.46 1.09 / 2.18 0.98 / 1.96 0.83 / 1.66
MF-R185 2.68 / 5.36 2.41 / 4.82 2.13 / 4.26 1.85 / 3.70 1.54 / 3.08 1.42 / 2.84 1.26 / 2.52 1.13 / 2.26 0.96 / 1.92
MF-R250 3.63 / 7.26 3.25 / 6.50 2.88 / 5.76 2.50 / 5.00 2.08 / 4.16 1.93 / 3.86 1.70 / 3.40 1.53 / 3.06 1.30 / 2.60
MF-R250-0-10 3.63 / 7.26 3.25 / 6.50 2.88 / 5.76 2.50 / 5.00 2.08 / 4.16 1.93 / 3.86 1.70 / 3.40 1.53 / 3.06 1.30 / 2.60
MF-R300 4.35 / 8.70 3.90 / 7.80 3.45 / 6.90 3.00 / 6.00 2.49 / 4.98 2.31 / 4.62 2.04 / 4.08 1.83 / 3.66 1.56 / 3.12
MF-R400 5.80 / 11.6 5.20 / 10.4 4.60 / 9.20 4.00 / 8.00 3.32 / 6.64 3.08 / 6.16 2.72 / 5.44 2.44 / 4.88 2.08 / 4.16
MF-R500 7.25 / 14.5 6.50 / 13.0 5.75 / 11.5 5.00 / 10.0 4.15 / 8.30 3.85 / 7.70 3.40 / 6.80 3.05 / 6.10 2.60 / 5.20
MF-R600 8.70 / 17.4 7.80 / 15.6 6.90 / 13.8 6.00 / 12.0 4.98 / 9.96 4.62 / 9.24 4.08 / 8.16 3.66 / 7.32 3.12 / 6.24
MF-R700 10.1 / 20.3 9.10 / 18.2 8.05 / 16.1 7.00 / 14.0 5.81 / 11.6 5.39 / 10.7 4.76 / 9.52 4.27 / 9.44 3.64 / 7.28
MF-R800 11.6 / 23.2 10.4 / 20.8 9.20 / 18.4 8.00 / 16.0 6.64 / 13.2 6.16 / 12.3 5.44 / 10.8 4.88 / 9.76 4.16 / 8.32
MF-R900 13.0 / 26.1 11.7 / 23.4 10.3 / 20.7 9.00 / 18.0 7.47 / 14.9 6.93 / 12.7 6.12 / 12.2 5.49 / 10.9 4.68 / 9.36
MF-R1100 16.1 / 32.0 14.6 / 29.2 13.1 / 26.2 11.0 / 22.1 9.40 / 18.4 8.80 / 17.6 7.80 / 15.6 6.90 / 13.8 5.20 / 10.4
Specifi cations are subject to change without notice.
Customers should verify actual device performance in their specifi c applications.
MF-R Series - PTC Resettable Fuses
Typical Time to Trip at 23 ºC
MF-R SERIES, REV. Y, 05/11
How to Order
MF - R 110 - 0 - 99
Multifuse®
Product Designator
Series
R = Radial Leaded Component
Hold Current, Ihold
005-1100 (0.05 Amps - 11.0 Amps)
Packaging Options
- __ = Bulk Packaging without part
number suffi x option
- 0-99 = Bulk Packaging with part
number suffi x option
- 2 = Tape and Reel without part
number suffi x option*
- 2-99 = Tape and Reel with part number
suffi x option
- AP = Ammo-Pak*
- 0-14 = Kinked leads where straight
leads are standard
- 0-17 = Straight leads where kinked
leads are standard
Part Number Suffi x Option
- 99 = As of date code April 1, 2005 all
MF-R models are RoHS
compliant. The suffi x “-99”
can be used if a new part
number is required to reference
the RoHS compliance.
Examples:
MF-R110 .................Bulk packaging
MF-R110-0-99.........Bulk packaging
with part number
suffi x option
MF-R110-2 ..............Tape and reel
packaging
MF-R110-2-99.........Tape and reel
packaging with
part number
suffi x option
MF-R090-0-9-99 .....Bulk packaging
with part number
suffi x option
MF-R250-0-10-99 ...Bulk packaging
with part number
suffi x option
*Packaged per EIA486-B
100
10
1
0.1
0.01
0.001
0.1 1 10 100
Fault Current (Amps)
Time to trip (Seconds)
MF-R017
MF-R040
MF-R075
MF-R020
MF-R050
MF-R065
MF-R090
MF-R025
MF-R030
MF-R010
MF-R005
100
10
1
0.1
0.01
0.001
110 100
Fault Current (Amps)
Time to trip (Seconds)
MF-R110
MF-R250,
250-0-10
MF-R500
MF-R135
MF-R300
MF-R400
MF-R600
MF-R700
MF-R800
MF-R900
MF-R1100
MF-R160
MF-R185
MF-R090
-0-9
Typical Part Marking: MF-R005 - R025
Represents total content. Layout may vary.
025
0A
PART
IDENTIFICATION
MANUFACTURER'S
TRADEMARK
DATE CODE:
WEEK 1 OF 2000 = 0A
(YEAR & WEEK)
WEEK 27 OF 2000 = A0
(WEEK & YEAR)
Typical Part Marking: MF-R030 - R1100
Represents total content. Layout may vary.
R250
0180T
MANUFACTURER'S
TRADEMARK
PART
IDENTIFICATION
DATE CODE
(FIRST DIGIT =
LAST DIGIT OF YEAR;
NEXT THREE DIGITS =
DAY OF YEAR)
LOT NO.
(T = TAIWAN
S = CHINA)
IEC EIA Dimensions
Dimension Description Mark Mark Dimensions Tolerance
Carrier tape width W W 18 -0.5/+1.0
(.709) (-0.02/+.039)
Hold down tape width W4 11
min.
W0 (.433)
Hold down tape No protrusion
Top distance between tape edges W2 W
6 3
max.
(.118)
Sprocket hole position W1 W
5 9 -0.5/+0.75
(.354) (-0.02/+0.03)
Sprocket hole diameter D0 D
0 4 ±0.2
(.157) (±.0078)
Abscissa to plane (straight lead) H H 18.5 ±3.0
(.728) (±.118)
Abscissa to plane (kinked lead) H0 H
0 16 ±0.5
(.63) (±.02)
Abscissa to top (straight lead) H1 H
1 38.0
max.
(1.496)
Abscissa to top (kinked lead) H1 H
1 32.2
max.
(1.268)
Overall width w/lead protrusion (straight lead) C1 55.0
max.
(2.165)
Overall width w/lead protrusion (kinked lead) C1 43.2
max.
(1.7)
Overall width w/o lead protrusion (straight lead) C2 54.0
max.
(2.126)
Overall width w/o lead protrusion (kinked lead) C2 42.5
max.
(1.673)
Lead protrusion I1 L
1 1.0
max.
(.039)
Protrusion of cutout L L 11
max.
(.433)
Protrusion beyond hold-down tape I2 I
2 Not specifi ed
Sprocket hole pitch P0 P
0 12.7 ±0.3
(0.5) (±.012)
Pitch tolerance 20 consecutive ±1
(±.039)
Device pitch: MF-R005–MF-R160, MF-R/90,
MF-RX110/72–MF-RX185/72
12.7 ±0.3
(0.5) (±.012)
Device pitch: MF-R185–MF-R400, MF-RX110–MF-RX375
MF-R/600, MF-RX250/72–MF-RX375/72
25.4 ±0.6
(1.0) (±.024)
Tape thickness t t 0.9
max.
(.035)
Tape thickness with splice: MF-R010–MF-R160, t1
max.
MF-RX110/72–MF-RX185/72
1.5
(.059)
Tape thickness with splice: MF-R250–MF-R1100, t1
max.
MF-RX110–MF-RX375, MF-R/90, MF-RX250/72-MF-RX375/72 2.3
(.091)
Splice sprocket hole alignment
0 ±0.3
(±.012)
Body lateral deviation Δh Δh 0
±1.0
(±.039)
Body tape plane deviation Δp Δp 0
±1.3
(±.051)
MF-R, MF-R/90, MF-R/600, MF-RX, MF-RX/72 & MF-RX/250 Series
Tape and Reel Specifi cations
Specifi cations are subject to change without notice.
Customers should verify actual device performance in their specifi c applications.
Devices taped using EIA468–B/IEC286-2 standards. See table below and Figures 1 and 2 for details.
DIMENSIONS: MM
(INCHES)
h
w
h
f
d
Reel
Upper side
Tape
Lower side
User
direction
of
feed
t
User direction of feed
Cross section A - B
pp
H
H1
Reference plane
W0
H0W1
W
AB
F
D0
P0
I1
I2
L
H1
P1
h
h
IEC EIA Dimensions
Dimension Description Mark Mark Dimensions Tolerance
Lead spacing: MF-R, MF-R/90, MF-R/600, MF-RX, MF-RX/72 F F 5.08 ±0.2
(0.2) (±0.008)
Lead spacing: MF-RX/250 F F 5.08 -0.5/+0.6
(0.2) (-.020/+.024)
Reel width w W2 56.0
max.
(2.205)
Reel diameter d a 370.0
max.
(14.57)
Space between fl anges less device 4.75 ±3.25
W1 h (.187) (±.128)
Arbor hole diameter f c 26.0 ±12.0
(1.024) (±.472)
Core diameter: MF-R, MF-RX, MF-R/90 h n 80
max.
(3.15)
Core diameter: MF-RX/250, MF-R/600 h n 91
max.
(3.58)
Box: MF-R, MF-RX, MF-R/90 56 372 372
max.
(2.2) (14.6) (14.6)
Box: MF-RX/250 67 372 362
max.
(2.64) (14.6) (14.25)
Box: MF-R/600 64 372 362
max.
(2.52) (14.6) (14.25)
Consecutive missing places: MF-R, MF-RX, MF-R/90 3 max.
Consecutive missing places: MF-RX/250, MF-R/600 none
Empty places per reel: MF-R, MF-RX, MF-R/90 Not specifi ed
Empty places per reel: MF-RX/250, MF-R/600 0.1 %
Specifi cations are subject to change without notice.
Customers should verify actual device performance in their specifi c applications.
Taped Component Dimensions - Figure 1
DIMENSIONS: MM
(INCHES)
MF-R, MF-R/90, MF-R/600, MF-RX, MF-RX/72 & MF-RX/250 Series
Tape and Reel Specifi cations
Reel Dimensions - Figure 2