PL IA NT CO M *R oH S Features Applications Radial Leaded Devices Almost anywhere there is a low voltage power supply and a load to be protected, including: Computers & peripherals General electronics Automotive applications Cured, flame retardant epoxy polymer R1 01810 0T insulating material meets UL 94V-0 requirements RoHS compliant* Agency recognition: MF-R Series - PTC Resettable Fuses Electrical Characteristics Ihold Model V max. Volts I max. Amps MF-R005** MF-R010 MF-R017 MF-R020 MF-R025 MF-R030 MF-R040 MF-R050 MF-R065 MF-R075 MF-R090 MF-R090-0-9 MF-R110 MF-R135 MF-R160 MF-R185 MF-R250 MF-R250-0-10 MF-R300 MF-R400 MF-R500 MF-R600 MF-R700 MF-R800 MF-R900 MF-R1100 60 60 60 60 60 60 60 60 60 60 60 30 30 30 30 30 30 30 30 30 30 30 30 30 30 16 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 100 Itrip Amperes at 23 C Hold Trip 0.05 0.10 0.10 0.20 0.17 0.34 0.20 0.40 0.25 0.50 0.30 0.60 0.40 0.80 0.50 1.00 0.65 1.30 0.75 1.50 0.90 1.80 0.90 1.80 1.10 2.20 1.35 2.70 1.60 3.20 1.85 3.70 2.50 5.00 2.50 5.00 3.00 6.00 4.00 8.00 5.00 10.00 6.00 12.00 7.00 14.00 8.00 16.00 9.00 18.00 11.00 22.00 Initial Resistance Ohms at 23 C Min. Max. 7.3 11.1 2.50 4.50 2.00 3.20 1.50 2.84 1.00 1.95 0.76 1.36 0.52 0.86 0.41 0.77 0.27 0.48 0.18 0.40 0.14 0.31 0.07 0.12 0.10 0.18 0.065 0.115 0.055 0.105 0.040 0.07 0.025 0.048 0.025 0.048 0.020 0.05 0.010 0.03 0.010 0.03 0.005 0.02 0.005 0.02 0.005 0.02 0.005 0.01 0.003 0.01 1 Hour (R1) Post-Trip Resistance Ohms at 23 C Max. 22.0 7.50 8.00 4.40 3.00 2.10 1.29 1.17 0.72 0.60 0.47 0.22 0.27 0.17 0.15 0.11 0.07 0.07 0.08 0.05 0.05 0.04 0.03 0.03 0.02 0.014 Max. Time to Trip Amperes at 23 C Seconds at 23 C 0.5 0.5 0.85 1.0 1.25 1.5 2.0 2.5 3.25 3.75 4.5 4.5 5.5 6.75 8.0 9.25 12.5 12.5 15.0 20.0 25.0 30.0 35.0 40.0 45.0 40.0 5.0 4.0 3.0 2.2 2.5 3.0 3.8 4.0 5.3 6.3 7.2 5.9 6.6 7.3 8.0 8.7 10.3 10.3 10.8 12.7 14.5 16.0 17.5 18.8 ***20.0 20.0 **CSA approval pending. ***Tested at 40 amps Environmental Characteristics Operating/Storage Temperature ...................... -40 C to +85 C Maximum Device Surface Temperature in Tripped State............................................ 125 C Passive Aging .................................................. +85 C, 1000 hours.......................................... 5 % typical resistance change Humidity Aging ................................................ +85 C, 85 % R.H. 1000 hours ........................ 5 % typical resistance change Thermal Shock ................................................ -40 C to +85 C, 10 times .............................. 10 % typical resistance change Solvent Resistance .......................................... MIL-STD-202, Method 215.............................. No change Vibration .......................................................... MIL-STD-883C, Method 2007.1, ..................... No change Condition A Test Procedures And Requirements For Model MF-R Series Test Test Conditions Accept/Reject Criteria Visual/Mech. .................................................... Verify dimensions and materials ...................... Per MF physical description Resistance ....................................................... In still air @ 23 C ............................................. Rmin R Rmax Time to Trip...................................................... 5 times Ihold, Vmax, 23 C .............................. T max. time to trip (seconds) Hold Current .................................................... 30 min. at Ihold ................................................ No trip Trip Cycle Life .................................................. Vmax, Imax, 100 cycles ................................... No arcing or burning Trip Endurance ................................................ Vmax, 48 hours ................................................ No arcing or burning UL File Number ............................................... E 174545 CSA File Number ............................................. CA 110338 TUV File Number ............................................. R2057213 *RoHS Directive 2002/95/EC Jan 27, 2003 including Annex. Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. Tripped Power Dissipation Watts at 23 C Typ. 0.22 0.38 0.48 0.40 0.45 0.50 0.55 0.75 0.90 0.90 1.00 0.60 0.70 0.80 0.90 1.00 1.20 1.20 2.00 2.50 3.00 3.50 3.80 4.00 4.20 4.50 Additional Features Bulk packaging, tape and reel and Ammo-Pak available on most models MF-R Series - PTC Resettable Fuses Product Dimensions (see next page for outline drawing) Model MF-R005 MF-R010 MF-R017 MF-R020 MF-R025 MF-R030 MF-R040 MF-R050 MF-R065 MF-R075 MF-R090 MF-R090-0-9 MF-R110 MF-R135 MF-R160 MF-R185 MF-R250 MF-R250-0-10 MF-R300 MF-R400 MF-R500 MF-R600 MF-R700 MF-R800 MF-R900 MF-R1100 A Max. 8.0 (0.315) 7.4 (0.291) 7.4 (0.291) 7.4 (0.291) 7.4 (0.291) 7.4 (0.291) 7.4 (0.291) 7.9 (0.311) 9.7 (0.382) 10.4 (0.409) 11.7 (0.461) 7.4 (0.291) 8.9 (0.350) 8.9 (0.350) 10.2 (0.402) 12.0 (0.472) 12.0 (0.472) 12.0 (0.472) 12.0 (0.472) 14.4 (0.567) 17.4 (0.685) 19.3 (0.760) 22.1 (0.870) 24.2 (0.953) 24.2 (0.953) 24.2 (0.953) B Max. 8.3 (0.327) 12.7 (0.5) 12.7 (0.5) 12.7 (0.5) 12.7 (0.5) 13.4 (0.528) 13.7 (0.539) 13.7 (0.539) 15.2 (0.598) 16.0 (0.630) 16.7 (0.657) 12.2 (0.480) 14.0 (0.551) 18.9 (0.744) 16.8 (0.661) 18.4 (0.724) 18.3 (0.720) 18.3 (0.720) 18.3 (0.720) 24.8 (0.976) 24.9 (0.980) 31.9 (1.256) 29.8 (1.173) 32.9 (1.295) 32.9 (1.295) 32.9 (1.295) C Nom. 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 10.2 (0.402) 10.2 (0.402) 10.2 (0.402) 10.2 (0.402) 10.2 (0.402) 10.2 (0.402) Tol. 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) D Min. 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) E Max. 3.1 (0.122) 3.1 (0.122) 3.1 (0.122) 3.1 (0.122) 3.1 (0.122) 3.1 (0.122) 3.1 (0.122) 3.1 (0.122) 3.1 (0.122) 3.1 (0.122) 3.1 (0.122) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) Packaging options: BULK: All models = 500 pcs. per bag. TAPE & REEL: MF-R005-MF-R160 - 12.7 mm device pitch = 3000 pcs. per reel; MF-R185-MF-R400 - 25.4mm device pitch = 1500 pcs. per reel; MF-R250-0-10 = 1500 pcs. per reel. AMMO-PACK: MF-R005-MF-R160 - 12.7 mm device pitch = 2000 pcs. per reel; MF-R185-MF-R400 - 25.4 mm device pitch = 1000 pcs. per reel; MF-R090-0-9 & MF-R250-0-10 = 2000 pcs. per reel. Physical Characteristics Style 4 1 1 1 1 1 1 1 1 1 1 3 1 1 1 1 2 3 2 2 2 2 2 2 2 2 0.405 (26AWG) 0.51 (24AWG) 0.81 (20AWG) Lead Dia. 0.405 (0.016) 0.51 (0.020) 0.51 (0.020) 0.51 (0.020) 0.51 (0.020) 0.51 (0.020) 0.51 (0.020) 0.51 (0.020) 0.51 (0.020) 0.51 (0.020) 0.51 (0.020) 0.51 (0.020) 0.51 (0.020) 0.51 (0.020) 0.51 (0.020) 0.51 (0.020) 0.81 (0.032) 0.51 (0.020) 0.81 (0.032) 0.81 (0.032) 0.81 (0.032) 0.81 (0.032) 0.81 (0.032) 0.81 (0.032) 0.81 (0.032) 0.81 (0.032) Material Sn/NiCu Sn/NiCu Sn/CuFe Sn/CuFe Sn/CuFe Sn/CuFe Sn/CuFe Sn/Cu Sn/Cu Sn/Cu Sn/Cu Sn/CuFe Sn/Cu Sn/Cu Sn/Cu Sn/Cu Sn/Cu Sn/CuFe Sn/Cu Sn/Cu Sn/Cu Sn/Cu Sn/Cu Sn/Cu Sn/Cu Sn/Cu DIMENSIONS: MM (INCHES) Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. MF-R Series - PTC Resettable Fuses Product Dimensions (see previous page for dimensions) Style 1 Style 2 A E Style 3 A E Style 4 A B B A E B E B D C D D D C C C NOTE: Kinked lead option is available for board standoff. Contact factory for details. NOTE: Also available with straight leads. Contact factory for details. Thermal Derating Chart - Ihold / Itrip (Amps) Model MF-R005 MF-R010 MF-R017 MF-R020 MF-R025 MF-R030 MF-R040 MF-R050 MF-R065 MF-R075 MF-R090 MF-R090-0-9 MF-R110 MF-R135 MF-R160 MF-R185 MF-R250 MF-R250-0-10 MF-R300 MF-R400 MF-R500 MF-R600 MF-R700 MF-R800 MF-R900 MF-R1100 -40 C 0.08 / 0.16 0.16 / 0.32 0.26 / 0.52 0.31 / 0.62 0.39 / 0.78 0.47 / 0.94 0.62 / 1.24 0.78 / 1.56 1.01 / 2.02 1.16 / 2.32 1.40 / 2.80 1.40 / 2.80 1.60 / 3.20 1.96 / 3.92 2.32 / 4.64 2.68 / 5.36 3.63 / 7.26 3.63 / 7.26 4.35 / 8.70 5.80 / 11.6 7.25 / 14.5 8.70 / 17.4 10.1 / 20.3 11.6 / 23.2 13.0 / 26.1 16.1 / 32.0 -20 C 0.07 / 0.14 0.14 / 0.28 0.23 / 0.46 0.27 / 0.54 0.34 / 0.68 0.41 / 0.82 0.54 / 1.08 0.68 / 1.36 0.88 / 1.76 1.02 / 2.04 1.22 / 2.44 1.22 / 2.44 1.43 / 2.86 1.76 / 3.52 2.08 / 4.16 2.41 / 4.82 3.25 / 6.50 3.25 / 6.50 3.90 / 7.80 5.20 / 10.4 6.50 / 13.0 7.80 / 15.6 9.10 / 18.2 10.4 / 20.8 11.7 / 23.4 14.6 / 29.2 0 C 0.06 / 0.12 0.12 / 0.24 0.20 / 0.40 0.24 / 0.48 0.30 / 0.60 0.36 / 0.72 0.48 / 0.96 0.60 / 1.20 0.77 / 1.54 0.89 / 1.78 1.07 / 2.14 1.07 / 2.14 1.27 / 2.54 1.55 / 3.10 1.84 / 3.68 2.13 / 4.26 2.88 / 5.76 2.88 / 5.76 3.45 / 6.90 4.60 / 9.20 5.75 / 11.5 6.90 / 13.8 8.05 / 16.1 9.20 / 18.4 10.3 / 20.7 13.1 / 26.2 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. Ambient Operating Temperature 23 C 40 C 50 C 0.05 / 0.10 0.04 / 0.08 0.04 / 0.08 0.10 / 0.20 0.08 / 0.16 0.07 / 0.14 0.17 / 0.34 0.14 / 0.28 0.12 / 0.24 0.20 / 0.40 0.16 / 0.32 0.14 / 0.28 0.25 / 0.50 0.20 / 0.40 0.18 / 0.36 0.30 / 0.60 0.24 / 0.48 0.22 / 0.44 0.40 / 0.80 0.32 / 0.64 0.29 / 0.58 0.50 / 1.00 0.41 / 0.82 0.36 / 0.72 0.65 / 1.30 0.53 / 1.06 0.47 / 0.94 0.75 / 1.50 0.61 / 1.22 0.54 / 1.08 0.90 / 1.80 0.73 / 1.46 0.65 / 1.30 0.90 / 1.80 0.73 / 1.46 0.65 / 1.30 1.10 / 2.20 0.91 / 1.82 0.85 / 1.70 1.35 / 2.70 1.12 / 2.24 1.04 / 2.08 1.60 / 3.20 1.33 / 2.66 1.23 / 2.46 1.85 / 3.70 1.54 / 3.08 1.42 / 2.84 2.50 / 5.00 2.08 / 4.16 1.93 / 3.86 2.50 / 5.00 2.08 / 4.16 1.93 / 3.86 3.00 / 6.00 2.49 / 4.98 2.31 / 4.62 4.00 / 8.00 3.32 / 6.64 3.08 / 6.16 5.00 / 10.0 4.15 / 8.30 3.85 / 7.70 6.00 / 12.0 4.98 / 9.96 4.62 / 9.24 7.00 / 14.0 5.81 / 11.6 5.39 / 10.7 8.00 / 16.0 6.64 / 13.2 6.16 / 12.3 9.00 / 18.0 7.47 / 14.9 6.93 / 12.7 11.0 / 22.1 9.40 / 18.4 8.80 / 17.6 60 C 0.03 / 0.07 0.06 / 0.12 0.11 / 0.22 0.13 / 0.26 0.16 / 0.32 0.19 / 0.38 0.25 / 0.50 0.32 / 0.64 0.41 / 0.82 0.47 / 0.94 0.57 / 1.14 0.57 / 1.14 0.75 / 1.50 0.92 / 1.84 1.09 / 2.18 1.26 / 2.52 1.70 / 3.40 1.70 / 3.40 2.04 / 4.08 2.72 / 5.44 3.40 / 6.80 4.08 / 8.16 4.76 / 9.52 5.44 / 10.8 6.12 / 12.2 7.80 / 15.6 70 C 0.03 / 0.07 0.05 / 0.10 0.09 / 0.18 0.11 / 0.22 0.14 / 0.28 0.16 / 0.32 0.22 / 0.44 0.27 / 0.54 0.35 / 0.70 0.41 / 0.82 0.49 / 0.98 0.49 / 0.98 0.67 / 1.34 0.82 / 1.64 0.98 / 1.96 1.13 / 2.26 1.53 / 3.06 1.53 / 3.06 1.83 / 3.66 2.44 / 4.88 3.05 / 6.10 3.66 / 7.32 4.27 / 9.44 4.88 / 9.76 5.49 / 10.9 6.90 / 13.8 85 C 0.02 / 0.05 0.04 / 0.08 0.07 / 0.14 0.08 / 0.16 0.10 / 0.20 0.12 / 0.24 0.16 / 0.32 0.20 / 0.40 0.26 / 0.52 0.30 / 0.60 0.36 / 0.72 0.36 / 0.72 0.57 / 1.14 0.70 / 1.40 0.83 / 1.66 0.96 / 1.92 1.30 / 2.60 1.30 / 2.60 1.56 / 3.12 2.08 / 4.16 2.60 / 5.20 3.12 / 6.24 3.64 / 7.28 4.16 / 8.32 4.68 / 9.36 5.20 / 10.4 MF-R Series - PTC Resettable Fuses Typical Time to Trip at 23 C How to Order MF -R MF 005 -R0 10 MF -R0 MF 17 -R MF 020 -R MF 025 -R MF 030 -R MF 040 -R MF 050 -R MF 065 -R MF 075 -R0 90 MF - R 110 - 0 - 99 Time to trip (Seconds) 100 10 1 0.1 0.01 0.001 0.1 1 10 100 MF -0--R09 9 0 MF -R MF 110 -R MF 135 -R MF 160 -R MF 185 -R 250 250, -0 MF -10 -R3 MF 00 -R MF 400 -R MF 500 -R MF 600 -R7 MF 00 -R MF 800 -R MF 900 -R1 100 Fault Current (Amps) Multifuse(R) Product Designator Series R = Radial Leaded Component Hold Current, Ihold 005-1100 (0.05 Amps - 11.0 Amps) Packaging Options - __ = Bulk Packaging without part number suffix option - 0-99 = Bulk Packaging with part number suffix option -2= Tape and Reel without part number suffix option* - 2-99 = Tape and Reel with part number suffix option - AP = Ammo-Pak* - 0-14 = Kinked leads where straight leads are standard - 0-17 = Straight leads where kinked leads are standard Part Number Suffix Option - 99 = As of date code April 1, 2005 all MF-R models are RoHS compliant. The suffix "-99" can be used if a new part number is required to reference the RoHS compliance. Examples: MF-R110 .................Bulk packaging MF-R110-0-99.........Bulk packaging with part number suffix option MF-R110-2 ..............Tape and reel packaging MF-R110-2-99.........Tape and reel packaging with part number suffix option MF-R090-0-9-99 .....Bulk packaging with part number suffix option MF-R250-0-10-99 ...Bulk packaging with part number suffix option *Packaged per EIA486-B Typical Part Marking: MF-R005 - R025 100 Time to trip (Seconds) Represents total content. Layout may vary. PART IDENTIFICATION 10 025 0A MANUFACTURER'S TRADEMARK 1 DATE CODE: WEEK 1 OF 2000 = 0A (YEAR & WEEK) WEEK 27 OF 2000 = A0 (WEEK & YEAR) Typical Part Marking: MF-R030 - R1100 0.1 Represents total content. Layout may vary. MANUFACTURER'S TRADEMARK PART IDENTIFICATION 0.01 0.001 1 10 Fault Current (Amps) 100 R250 DATE CODE (FIRST DIGIT = LAST DIGIT OF YEAR; NEXT THREE DIGITS = DAY OF YEAR) 0180T LOT NO. (T = TAIWAN S = CHINA) MF-R SERIES, REV. Y, 05/11 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. MF-R, MF-R/90, MF-R/600, MF-RX, MF-RX/72 & MF-RX/250 Series Tape and Reel Specifications Devices taped using EIA468-B/IEC286-2 standards. See table below and Figures 1 and 2 for details. IEC Mark EIA Mark Carrier tape width W W Hold down tape width W0 W4 Dimension Description Hold down tape Top distance between tape edges Dimensions Dimensions Tolerance 18 -0.5/+1.0 (.709) (-0.02/+.039) 11 min. (.433) No protrusion W2 W6 Sprocket hole position W1 W5 Sprocket hole diameter D0 D0 Abscissa to plane (straight lead) H H Abscissa to plane (kinked lead) H0 H0 Abscissa to top (straight lead) H1 H1 Abscissa to top (kinked lead) H1 H1 Overall width w/lead protrusion (straight lead) C1 Overall width w/lead protrusion (kinked lead) C1 Overall width w/o lead protrusion (straight lead) C2 Overall width w/o lead protrusion (kinked lead) C2 3 (.118) 9 (.354) 4 (.157) 18.5 (.728) 16 (.63) 38.0 (1.496) 32.2 (1.268) 55.0 (2.165) 43.2 (1.7) 54.0 (2.126) 42.5 (1.673) 1.0 (.039) 11 (.433) Lead protrusion I1 L1 Protrusion of cutout L L Protrusion beyond hold-down tape I2 I2 Not specified Sprocket hole pitch P0 P0 12.7 (0.5) Pitch tolerance 20 consecutive max. -0.5/+0.75 (-0.02/+0.03) 0.2 (.0078) 3.0 (.118) 0.5 (.02) max. max. max. max. max. max. max. max. 0.3 (.012) 1 (.039) Device pitch: MF-R005-MF-R160, MF-R/90, MF-RX110/72-MF-RX185/72 12.7 (0.5) 0.3 (.012) Device pitch: MF-R185-MF-R400, MF-RX110-MF-RX375 MF-R/600, MF-RX250/72-MF-RX375/72 25.4 (1.0) 0.6 (.024) 0.9 (.035) max. Tape thickness t t Tape thickness with splice: MF-R010-MF-R160, MF-RX110/72-MF-RX185/72 t1 1.5 (.059) max. Tape thickness with splice: MF-R250-MF-R1100, MF-RX110-MF-RX375, MF-R/90, MF-RX250/72-MF-RX375/72 t1 2.3 (.091) max. Splice sprocket hole alignment 0 Body lateral deviation h h 0 Body tape plane deviation p p 0 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 0.3 (.012) 1.0 (.039) 1.3 (.051) DIMENSIONS: MM (INCHES) MF-R, MF-R/90, MF-R/600, MF-RX, MF-RX/72 & MF-RX/250 Series Tape and Reel Specifications IEC Mark EIA Mark Lead spacing: MF-R, MF-R/90, MF-R/600, MF-RX, MF-RX/72 F F Lead spacing: MF-RX/250 F F Reel width w W2 Reel diameter d a W1 h Arbor hole diameter f c Core diameter: MF-R, MF-RX, MF-R/90 h n Core diameter: MF-RX/250, MF-R/600 h n Dimension Description Space between flanges less device Dimensions Dimensions Tolerance 5.08 0.2 (0.2) (0.008) 5.08 -0.5/+0.6 (0.2) (-.020/+.024) 56.0 max. (2.205) 370.0 max. (14.57) 4.75 3.25 (.187) (.128) 26.0 12.0 (1.024) (.472) 80 max. (3.15) 91 max. (3.58) 56 372 372 max. (2.2) (14.6) (14.6) 67 372 362 max. (2.64) (14.6) (14.25) 64 372 362 max. (2.52) (14.6) (14.25) Box: MF-R, MF-RX, MF-R/90 Box: MF-RX/250 Box: MF-R/600 Consecutive missing places: MF-R, MF-RX, MF-R/90 3 Consecutive missing places: MF-RX/250, MF-R/600 none Empty places per reel: MF-R, MF-RX, MF-R/90 Not specified Empty places per reel: MF-RX/250, MF-R/600 0.1 % max. Taped Component Dimensions - Figure 1 h p h p Reference plane P1 H1 A L I2 H1 F H H0 B W0 I1 P0 W1 W D0 User direction of feed DIMENSIONS: Cross section A - B Reel Dimensions - Figure 2 MM (INCHES) t Reel h d User direction of feed Upper side Tape Lower side f h w Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications.