Single-Channel: 6N135, 6N136 , HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 — High Speed Transistor Optocouplers
©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com
6N135, 6N136, HCPL2503, HCPL4502, HCPL2530, HCPL2531 Rev. 1.0.7
August 2008
Single-Channel: 6N135, 6N136, HCPL2503, HCPL4502
Dual-Channel: HCPL2530, HCPL2531
High Speed Transistor Optocouplers
Features
■
High speed –1 MBit/s
■
Superior CMR – 10kV/µs
■
Dual-Channel HCPL2530/HCPL2531
■
Double working voltage – 480V RMS
■
CTR guaranteed 0–70°C
■
U.L. recognized (File # E90700)
Applications
■
Line receivers
■
Pulse transformer replacement
■
Output interface to CMOS-LSTTL-TTL
■
Wide bandwidth analog coupling
Description
The HCPL4502, HCPL2503, 6N135, 6N136, HCPL2530
and HCPL2531 optocouplers consist of an AlGaAs
LED optically coupled to a high speed photodetector
transistor.
A separate connection for the bias of the photodiode
improves the speed by several orders of magnitude over
conventional phototransistor optocouplers by reducing
the base-collector capacitance of the input transistor.
An internal noise shield provides superior common
mode rejection of 10kV/µs. An improved package allows
superior insulation permitting a 480V working voltage
compared to industry standard of 220V.
Schematics Package Outlines
8
1
8
1
8
1
1
2
3
4 5
6
7
8
+
_
VF1
VCC
V01
V02
GND
VF2
_
+
HCPL2530/HCPL2531
1
2
3
4 5
6
7
8
+
_
VF
VCC
VB
VO
GNDN/C
N/C
6N135, 6N136, HCPL2503, HCPL4502
Pin 7 is not connected in
Part Number HCPL4502
©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com
6N135, 6N136, HCPL2503, HCPL4502, HCPL2530, HCPL2531 Rev. 1.0.7 2
Single-Channel: 6N135, 6N136 , HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 — High Speed Transistor Optocouplers
Absolute Maximum Ratings
(T
A
= 25°C unless otherwise specified)
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only.
Notes:
1. Derate linearly above 70°C free-air temperature at a rate of 0.8mA/°C.
2. Derate linearly above 70°C free-air temperature at a rate of 1.6mA/°C.
3. Derate linearly above 70°C free-air temperature at a rate of 0.9 mW/°C.
4. Derate linearly above 70°C free-air temperature at a rate of 2.0 mW/°C.
Symbol Parameter Condition Value Units
T
STG
Storage Temperature -55 to +125 °C
T
OPR
Operating Temperature -55 to +100 °C
T
SOL
Lead Solder Temperature 260 for 10 sec °C
EMITTER
I
F
(avg) DC/Average Forward Input
Current Each Channel
(1)
25 mA
I
F
(pk) Peak Forward Input Current
Each Channel
(2)
50% duty cycle, 1ms P.W. 50 mA
I
F
(trans) Peak Transient Input Current
Each Channel
≤
1µs P.W., 300pps 1.0 A
V
R
Reverse Input Voltage Each
Channel
5V
P
D
Input Power Dissipation Each
Channel
6N135/6N136 and HCPL2503/4502 100 mW
HCPL-2530/253
(3)
45
DETECTOR
I
O
(avg) Average Output Current Each
Channel
8 mA
I
O
(pk) Peak Output Current Each
Channel
16 mA
V
EBR
Emitter-Base Reverse Voltage 6N135, 6N136 and HCPL2503 only 5 V
V
CC
Supply Voltage -0.5 to 30 V
V
O
Output Voltage -0.5 to 20 V
I
B
Base Current 6N135, 6N136 and HCPL2503 only 5 mA
PD Output Power Dissipation
Each Channel
6N135, 6N136, HCPL2503, HCPL4502
(4)
100 mW
HCPL2530, HCPL2531 35 mW
©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com
6N135, 6N136, HCPL2503, HCPL4502, HCPL2530, HCPL2531 Rev. 1.0.7 3
Single-Channel: 6N135, 6N136 , HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 — High Speed Transistor Optocouplers
Electrical Characteristics
(T
A
= 0 to 70°C Unless otherwise specified)
Individual Component Characteristics
*All Typicals at T
A
= 25°C
Symbol Parameter Test Conditions Device Min. Typ.* Max. Unit
EMITTER
V
F
Input Forward Voltage I
F
= 16mA, T
A
=25°C 1.45 1.7 V
I
F
= 16mA 1.8
B
VR
Input Reverse Breakdown
Voltage
I
R
= 10 µA 5.0 V
∆
V
F
/
∆
T
A
Temperature Coefficient of
Forward Voltage
I
F
= 16mA -1.6 mV/°C
DETECTOR
I
OH
Logic High Output Current I
F
= 0mA, V
O
= V
CC
= 5.5V,
T
A
=25°C
All 0.001 0.5 µA
I
F
= 0mA, V
O
= V
CC
= 15V,
T
A
=25°C
6N135
6N136
HCPL4502
HCPL2503
0.005 1
I
F
= 0mA, V
O
= V
CC
= 15V All 50
I
CCL
Logic Low Supply Current I
F
= 16mA, V
O
= Open,
V
CC
= 15V
6N135
6N136
HCPL4502
HCPL2503
120 200 µA
I
F1
= I
F2
= 16mA,
V
O
= Open, V
CC
= 15V
HCPL2530
HCPL2531
200 400
I
CCH
Logic High Supply Current I
F
= 0mA, V
O
= Open,
V
CC
= 15V, T
A
=25°C
6N135
6N136
HCPL4502
HCPL2503
1µA
I
F
= 0mA, V
O
= Open,
V
CC
= 15V
6N135
6N136
HCPL4502
HCPL2503
2
I
F
= 0mA, V
O
= Open,
V
CC
= 15V
HCPL2530
HCPL2531
0.02 4
©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com
6N135, 6N136, HCPL2503, HCPL4502, HCPL2530, HCPL2531 Rev. 1.0.7 4
Single-Channel: 6N135, 6N136 , HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 — High Speed Transistor Optocouplers
Electrical Characteristics
(Continued) (T
A
= 0 to 70°C unless otherwise specified)
Transfer Characteristics
*All Typicals at T
A
= 25°C
Note:
5. Current Transfer Ratio is defined as a ratio of output collector current, I
O
, to the forward LED input current, I
F
,
times 100%.
Symbol Parameter Test Conditions Device Min. Typ.* Max. Unit
COUPLED
CTR Current Transfer
Ratio
(5)
I
F
= 16mA, V
O
= 0.4 V,
V
CC
= 4.5V, T
A
=25°C
6N135
HCPL2530
71850%
6N136
HCPL4502
HCPL2531
19 27 50 %
HCPL2503 12 27 %
I
F
= 16mA,
V
CC
= 4.5V
V
OL
= 0.4V 6N135 5 21 %
V
OL
= 0.5V HCPL2530
V
OL
= 0.4V 6N136
HCPL4502
15 30 %
V
OL
= 0.5V HCPL2531
V
OL
= 0.4V HCPL2503 9 30 %
V
OL
Logic LOW Output
Voltage
I
F
= 16mA, I
O
= 1.1mA,
V
CC
= 4.5V, T
A
=25°C
6N135 0.18 0.4 V
HCPL2530 0.18 0.5
I
F
= 16mA, I
O
= 3mA,
V
CC
= 4.5V, T
A
=25°C
6N136
HCPL2503
0.25 0.4
HCPL2531 0.25 0.5
I
F
= 16mA, I
O
= 0.8mA,
V
CC
= 4.5V
6N135
HCPL2530
0.5
I
F
= 16mA, I
O
= 2.4mA,
V
CC
= 4.5V
HCPL4502
HCPL2531
0.5
©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com
6N135, 6N136, HCPL2503, HCPL4502, HCPL2530, HCPL2531 Rev. 1.0.7 5
Single-Channel: 6N135, 6N136 , HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 — High Speed Transistor Optocouplers
Electrical Characteristics
(Continued) (T
A
= 0 to 70°C unless otherwise specified)
Switching Characteristics
(VCC = 5V)
** All Typicals at TA = 25°C
Notes:
6. The 4.1kΩ load represents 1 LSTTL unit load of 0.36mA and 6.1kΩ pull-up resistor.
7. The 1.9kΩ load represents 1 TTL unit load of 1.6mA and 5.6kΩ pull-up resistor.
8. Common mode transient immunity in logic high level is the maximum tolerable (positive) dVcm/dt on the leading edge
of the common mode pulse signal VCM, to assure that the output will remain in a logic high state (i.e., VO > 2.0V).
Common mode transient immunity in logic low level is the maximum tolerable (negative) dVcm/dt on the trailing edge
of the common mode pulse signal, VCM, to assure that the output will remain in a logic low state (i.e., VO < 0.8V).
Symbol Parameter Test Conditions Device Min. Typ.* Max. Unit
TPHL Propagation Delay
Time to Logic LOW
TA = 25°C, RL = 4.1kΩ,
IF = 16mA(6) (Fig. 7)
6N135
HCPL2530
0.45 1.5 µs
RL = 1.9kΩ, IF = 16mA,
TA = 25°C(7) (Fig. 7)
6N136
HCPL4502
HCPL2503
HCPL2531
0.45 0.8 µs
RL = 4.1kΩ, IF = 16mA(6) (Fig. 7) 6N135
HCPL2530
2.0 µs
RL = 1.9kΩ, IF = 16mA(7) (Fig. 7) 6N136
HCPL4502
HCPL2503
HCPL2531
1.0 µs
TPLH Propagation Delay
Time to Logic HIGH
TA = 25°C, (RL = 4.1kΩ,
IF = 16mA(6) (Fig. 7)
6N135
HCPL2530
0.5 1.5 µs
RL = 1.9kΩ, IF = 16mA(7) (Fig. 7)
TA = 25°C
6N136
HCPL4502
HCPL2503
HCPL2531
0.3 0.8 µs
RL = 4.1kΩ, IF = 16mA(6) (Fig. 7) 6N135
HCPL2530
2.0 µs
RL = 1.9kΩ, IF = 16mA(7) (Fig. 7) 6N136
HCPL4502
HCPL2503
HCPL2531
1.0 µs
|CMH| Common Mode
Transient
Immunity at
Logic High
IF = 0mA, VCM = 10VP-P,
RL = 4.1kΩ, TA = 25°C(8) (Fig. 8)
6N135
HCPL2530
10,000 V/µs
IF = 0mA, VCM = 10VP-P,
RL = 1.9kΩ, TA = 25°C(8) (Fig. 8)
6N136
HCPL4502
HCPL2503
HCPL2531
10,000 V/µs
|CML| Common Mode
Transient
Immunity at
Logic Low
IF = 16mA, VCM = 10 VP-P,
RL = 4.1kΩ, TA = 25°C(8) (Fig. 8)
6N135
HCPL2530
10,000 V/µs
IF = 16mA, VCM = 10 VP-P,
RL = 1.9kΩ(8) (Fig. 8)
6N136
HCPL4502
HCPL2503
HCPL2531
10,000 V/µs
©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com
6N135, 6N136, HCPL2503, HCPL4502, HCPL2530, HCPL2531 Rev. 1.0.7 6
Single-Channel: 6N135, 6N136 , HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 — High Speed Transistor Optocouplers
Electrical Characteristics (Continued) (TA = 0 to 70°C unless otherwise specified)
Isolation Characteristics (TA = 0 to 70°C Unless otherwise specified)
Notes:
9. Device is considered a two terminal device: Pins 1, 2, 3 and 4 are shorted together and Pins 5, 6, 7 and 8 are
shorted together.
10. Measured between pins 1 and 2 shorted together, and pins 3 and 4 shorted together.
Symbol Characteristics Test Conditions Min Typ** Max Unit
II-O Input-Output Insulation
Leakage Current
Relative humidity = 45%,
TA = 25°C, t = 5s,
VI-O = 3000 VDC(9)
1.0 µA
VISO Withstand Insulation Test
Voltage
RH ≤ 50%, TA = 25°C, II-O ≤ 2µA,
t = 1 min.(9) 2500 VRMS
RI-O Resistance (Input to Output) VI-O = 500VDC(9) 1012 Ω
CI-O Capacitance (Input to Output) f = 1MHz(9) 0.6 pF
HFE DC Current Gain IO = 3mA, VO = 5V(9) 150
II-I Input-Input Insulation Leakage
Current
RH ≤ 45%, VI-I = 500VDC(10)
t = 5 s, (HCPL2530/2531 only)
0.005 µA
RI-I Input-Input Resistance VI-I = 500 VDC(10)
(HCPL2530/2531 only)
1011 Ω
CI-I Input-Input Capacitance f = 1MHz)(10)
(HCPL2530/2531 only)
0.03 pF
©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com
6N135, 6N136, HCPL2503, HCPL4502, HCPL2530, HCPL2531 Rev. 1.0.7 7
Single-Channel: 6N135, 6N136 , HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 — High Speed Transistor Optocouplers
Typical Performance Curves
Fig. 1 Normalized CTR vs. Forward Current
IF - FORWARD CURRENT (mA)
0.1 1 10 100
NORMALIZED CTR
0.0
0.2
0.4
0.6
0.8
1.0
1.2
Fig. 2 Normalized CTR vs. Temperature
TA - TEMPERATURE (°C)
-60 -40 -20 0 20 40 60 80 100
NORMALIZED CTR
0.0
0.2
0.4
0.6
0.8
1.0
1.2
Fig. 3 Output Current vs. Output Voltage
VO – OUTPUT VOLTAGE (V)
02468101214161820
I
O
– OUTPUT CURRENT (mA)
0
2
4
6
8
10
12
14
16
IF = 5mA
IF = 10mA
IF = 15mA
IF = 20mA
IF = 25mA
IF = 30mA
IF = 35mA
IF = 40mA
Normalized to:
IF = 16 mA
VO = 0.4 V
VCC = 5 V
TA = 25°C
Normalized to:
TA = 25°C
IF = 16mA
VCC = 5 V
VO = 0.4 V
Fig. 4 Logic High Output Current
vs. Temperature
TA – TEMPERATURE (°C)
-60 -40 -20 0 20 40 60 80 100
I
OH
– LOGIC HIGH OUTPUT CURRENT (nA)
0.1
1
10
100
1000
Fig. 5 Propagation Delay vs. Temperature
TA – TEMPERATURE (°C)
-60 -40 -20 0 20 40 60 80 100
Tp – PROPAGATION DELAY (ns)
0
100
200
300
400
500
600
700
800
RL = 1.9kΩ (TPHL)
R = 4.1kΩ (TPLH)
L
RL = 1.9kΩ (TPLH)
RL
= 4.1kΩ (TPLH)
Fig. 6 Propagation Delay vs. Load Resistance
RL – LOAD RESISTANCE (kΩ)
1 10
T
P
- PROPAGATION DELAY (ns)
100
1000
10000
IF - 16mA (TPHL)
IF - 10mA (TPHL)
IF - 10mA (TPLH)
IF - 16mA (TPLH)
TA = 25°C
VCC = 5 V IF = 0 mA
VCC = 5 V
VO = 5 V
IF = 16mA
VCC = 5 V
VCC = 5 V
TA = 25°C
©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com
6N135, 6N136, HCPL2503, HCPL4502, HCPL2530, HCPL2531 Rev. 1.0.7 8
Single-Channel: 6N135, 6N136 , HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 — High Speed Transistor Optocouplers
Test Circuits
Pulse Gen
CM
V
V
FF
B
A
+-
+5 V
O
V
-
I
F
3
4
+
F
V
-
2
1
Shield
Noise
6
O
5
GND
7
8
V
B
V
CC
V
L
R
PLH
OL
V
V
O
0
5 V
1.5 V
F
I
1.5 V
T
PHL
T
Switch at A : I = 0 mA
F
Switch at A : I = 16 mA
F
t
r
V
O
O
V
OL
V
5 V
0 V 10% 10%
90%
CM
V 10 V
4 5
Noise
1
2
3
Shield
8
7
6
+5 V
O
V
V
CC
V
01
V
02
GND
V
F1
-
+
F2
V
-
F
I+
10% DUTY CYCLE
I/f < 100µS
F
I
MONITOR
L
R
C = 1.5 µF
L
Pulse
Generator
tr = 5ns
Z = 50
O
Ω
GND
+
4 5
1
3
2
-
F2
V
V
F1
-
Shield
Noise
+5 V
CC
8
V
L
V
6
02
V
7
R
01
V
O
V
CM
A
B
Pulse Gen
F
I
+-
+
3
I Monitor
F
4
I/f < 100µs
10% D.C.
tr = 5ns
Generator
Pulse
Z = 50
O
+
V
F
I
Ω
F
-
2
1
Shield
Noise
V
O
O
6
5
GND
7
8
V
B
V
L
R
CC
V+5 V
0.1 µF
L
C = 1.5 µF
Test Circuit for 6N135, 6N136, HCPL-2503 and HCPL- 4502
0.1 µF
Test Circuit for HCPL-2530 and HCPL-2531
Test Circuit for 6N135, 6N136, HCPL-2503 and HCPL-4502 Test Circuit for HCPL-2530 and HCPL-2531
f
t
0.1 µF
0.1 µF
FF
V
m
R
m
R
90%
Fig. 7 Switching Time Test Circuit
Fig. 8 Common Mode Immunity Test Circuit
©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com
6N135, 6N136, HCPL2503, HCPL4502, HCPL2530, HCPL2531 Rev. 1.0.7 9
Single-Channel: 6N135, 6N136 , HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 — High Speed Transistor Optocouplers
Package Dimensions
Through Hole
Surface Mount
Note:
All dimensions are in inches (millimeters)
0.4" Lead Spacing
8-Pin DIP – Land Pattern
0.200 (5.08)
0.140 (3.55)
0.100 (2.54) TYP
0.022 (0.56)
0.016 (0.41)
0.020 (0.51) MIN
0.390 (9.91)
0.370 (9.40)
0.270 (6.86)
0.250 (6.35)
3
0.070 (1.78)
0.045 (1.14)
241
56 78
0.300 (7.62)
TYP
0.154 (3.90)
0.120 (3.05)
0.016 (0.40)
0.008 (0.20)
15° MAX
PIN 1
ID.
SEATING PLANE
Lead Coplanarity : 0.004 (0.10) MAX
0.270 (6.86)
0.250 (6.35)
0.390 (9.91)
0.370 (9.40)
0.022 (0.56)
0.016 (0.41)
0.100 (2.54)
TYP
0.020 (0.51)
MIN
0.070 (1.78)
0.045 (1.14)
0.300 (7.62)
TYP
0.405 (10.30)
MAX.
0.315 (8.00)
MIN
0.045 (1.14)
32 14
5678
0.016 (0.41)
0.008 (0.20)
PIN 1
ID.
0.200 (5.08)
0.140 (3.55)
0.100 (2.54) TYP
0.022 (0.56)
0.016 (0.41)
0.004 (0.10) MIN
0.390 (9.91)
0.370 (9.40)
0.270 (6.86)
0.250 (6.35)
3
0.070 (1.78)
0.045 (1.14)
241
56 78
0.400 (10.16)
TYP
0.154 (3.90)
0.120 (3.05)
0.016 (0.40)
0.008 (0.20)
0° to 15°
PIN 1
ID.
SEATING PLANE
0.070 (1.78)
0.060 (1.52)
0.030 (0.76)
0.100 (2.54)
0.295 (7.49)
0.415 (10.54)
©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com
6N135, 6N136, HCPL2503, HCPL4502, HCPL2530, HCPL2531 Rev. 1.0.7 10
Single-Channel: 6N135, 6N136 , HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 — High Speed Transistor Optocouplers
Ordering Information
Marking Information
Option Example Part Number Description
S 6N135S Surface Mount Lead Bend
SD 6N135SD Surface Mount; Tape and reel
W 6N135W 0.4" Lead Spacing
V 6N135V VDE0884
WV 6N135WV VDE0884; 0.4” lead spacing
SV 6N135SV VDE0884; surface mount
SDV 6N135SDV VDE0884; surface mount; tape and reel
1
2
6
43 5
Definitions
1Fairchild logo
2Device number
3VDE mark (Note: Only appears on parts ordered with VDE option –
See order entry table)
4Two digit year code, e.g., ‘03’
5Two digit work week ranging from ‘01’ to ‘53’
6 Assembly package code
2503
T1YYXXV
©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com
6N135, 6N136, HCPL2503, HCPL4502, HCPL2530, HCPL2531 Rev. 1.0.7 11
Single-Channel: 6N135, 6N136 , HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 — High Speed Transistor Optocouplers
Tape Specifications
Reflow Profile
4.0 ± 0.1
Ø1.55 ± 0.05
User Direction of Feed
4.0 ± 0.1
1.75 ± 0.10
7.5 ± 0.1
16.0 ± 0.3
12.0 ± 0.1
0.30 ± 0.05
13.2 ± 0.2
4.90 ± 0.20
0.1 MAX 10.30 ± 0.20
10.30 ± 0.20
Ø1.6 ± 0.1
• Peak reflow temperature: 225 C (package surface temperature)
• Time of temperature higher than 183 C for 60–150 seconds
• One time soldering reflow is recommended
215 C, 10–30 s
225 C peak
Time (Minute)
0
300
250
200
150
100
50
00.5 1 1.5 2 2.5 3 3.5 4 4.5
Temperature (°C)
Time above 183 C, 60–150 sec
Ramp up = 3 C/sec
©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com
6N135, 6N136, HCPL2503, HCPL4502, HCPL2530, HCPL2531 Rev. 1.0.7 12
TRADEMARKS
The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries,andis not
intended to be an exhaustive list of all such trademarks.
Build it Now™
CorePLUS™
CorePOWER™
CROSSVOLT™
CTL™
Current Transfer Logic™
EcoSPARK®
EfficentMax™
EZSWITCH™ *
™
®
Fairchild®
Fairchild Semiconductor®
FACT Quiet Series™
FACT®
FAST®
FastvCore™
FlashWriter®*
FPS™
F-PFS™
FRFET®
Global Power ResourceSM
Green FPS™
Green FPS™e-Series™
GTO™
IntelliMAX™
ISOPLANAR™
MegaBuck™
MICROCOUPLER™
MicroFET™
MicroPak™
MillerDrive™
MotionMax™
Motion-SPM™
OPTOLOGIC®
OPTOPLANAR®
®
PDP SPM™
Power-SPM™
PowerTrench®
Programmable Active Droop™
QFET®
QS™
Quiet Series™
RapidConfigure™
Saving our world, 1mW at a time™
SmartMax™
SMART START™
SPM®
STEALTH™
SuperFET™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
SupreMOS™
SyncFET™
®
ThePower Franchise®
TinyBoost™
TinyBuck™
TinyLogic®
TINYOPTO™
TinyPower™
TinyPWM™
TinyWire™
µSerDes™
UHC®
Ultra FRFET™
UniFET™
VCX™
VisualMax™
*EZSWITCH™ and FlashWriter®are trademarks of System General Corporation, used under license by Fairchild Semiconductor.
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE
RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR
CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE
SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN,
WHICHCOVERS THESE PRODUCTS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE
EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or systems which, (a) are
intended for surgical implant into the body or (b) support or sustain life,
and (c) whose failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be reasonably
expected to result in a significant injury of the user.
2. A critical component in any component of a life support, device, or
system whose failure to perform can be reasonably expected to
cause the failure of the life support device or system, or to affect its
safety or effectiveness.
ANTI-COUNTERFEITING POLICY
Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com,
under Sales Support.
Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts.
Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failedapplications,
and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of
counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are
listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have
full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technicaland product information.
Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide
any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our
customers to do their part in stopping this practice by buying direct or from authorized distributors.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification Product Status Definition
Advance Information Formative / In Design Datasheet contains the design specifications for product development. Specifications may change in
any manner without notice.
Preliminary First Production Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild
Semiconductor reserves the right to make changes at any time without notice to improve design.
No Identification Needed Full Production Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes
at any time without notice to improve the design.
Obsolete Not In Production Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The
datasheet is for reference information only.
Rev. I35
Single-Channel: 6N135, 6N136 , HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 — High Speed Transistor Optocouplers