A Global Leader in the Design, Development, and Manufacture of Sensor and Magnetic Components www.standexmeder.com Series Datasheet - CRF Reed Relays CRF Series Reed Relays Features: High Frequency Ultraminiature Relay up to 7GHz, High Insulation Resistance up to 10 TOhm SMD, Ceramic/Thermoset Molded Package, Supplied in Tape&Reel, UL listed, BGA option For RF Parameters, see our website www.meder.com or ask your responsible Customer Service Applications: High Frequency Applications, Test and Measurement Systems, Telecommunications Part Description: CRF 00XXX (250) Nominal Voltage Contact Form Options Packaging 03, 05 1A, 1B S (Soldering Ball Option) 1000 standard or 250 pcs Customer Options Contact Data Switch Model Rated Power (max.) 10 W 170 V 0.5 A 1.0 A 200 mOhm 0.21 kVDC 0.6 ms 0.05 ms 1010 Ohm 0.4 pF 80 Any DC combination of V&A not to exceed their individual max.'s Switching Voltage (max.) DC or peak AC Switching Current (max.) DC or peak AC Carry Current (max.) DC or peak AC Contact Resistance (max.) @ 0.5V & 50mA Breakdown Voltage (min.) According to EN602555 Operating Time (max.) Incl. Bounce; Measured with w/ Nominal Voltage Release Time (max.) Measured with no Coil Excitation Insulation Resistance (typ.) Rh<45%, 100V Test Voltage Capacitance (typ.) @ 10kHz across open Switch USA: Europe: Asia: +1 866/782 6339 +49 7731/83990 +86 21/37820625 salesusa@standexmeder.com info@standexmeder.com salesasia@standexmeder.com Unit Vers. 01 22.12.2014 A Global Leader in the Design, Development, and Manufacture of Sensor and Magnetic Components www.standexmeder.com Series Datasheet - CRF Reed Relays Coil Data Contact Form Switch Model 1A 80 Unit Coil Voltage Coil Resistance (typ.) (typ.) 03 70 05 150 VDC PullIn Voltage (max.) 2.25 3.5 VDC DropOut Voltage (min.) 0.45 0.75 VDC Nominal Coil Power (typ.) 129 167 mW All Data at 20C Relay Data Unit Dielectric Strength Coil/Contact (min.) according to EN602555 Insulation Resistance Coil/Contact (min.) Rh<45%, 200V Test Voltage Shock Resistance (max.) 1,5 kVDC 1013 Ohm 50 g 20 g Operating Temperature 40 to 125 C Storage Temperature 55 to 125 C 260 C 1/2 sine wave duration 11ms Vibration Resistance (max.) Soldering Temperature (max.) 5 sec. max. Washability CRR Reed Relay fully sealed Life Test Data *Load increase reduces life expectancy of Reed Switches Handing & Assembly Instructions Switching inductive and/or capacitive loads create voltage and/or current peaks, which may damage the relay. Protective circuits need to be used. External magnetic fields needs to be taken into consideration, including a too high packing density. This may influence the relays' electrical characteristics. Mechanical shock impacts e.g. dropping the relays may cause immediate or postinstallation failure. Wave soldering: maximum 260/5 seconds. Reflow soldering: Recommendations given by the soldering paste manufacturer need to be considered as well as the temperature limits of other components/processes. Glossary Form A NO = Normally Open Contacts SPST = Single Pole Single Throw Form B NC = Normally Closed Contacts SPST = Single Pole Single Throw Form C Changeover SPDT = Single Pole Double Throw USA: Europe: Asia: +1 866/782 6339 +49 7731/83990 +86 21/37820625 salesusa@standexmeder.com info@standexmeder.com salesasia@standexmeder.com Vers. 01 24.11.2014 A Global Leader in the Design, Development, and Manufacture of Sensor and Magnetic Components www.standexmeder.com Series Datasheet - CRF Reed Relays Pin Out Pad / PCB Layout Top View Bottom View USA: Europe: Asia: +1 866/782 6339 +49 7731/83990 +86 21/37820625 salesusa@standexmeder.com info@standexmeder.com salesasia@standexmeder.com Vers. 01 24.11.2014