LDA213 Dual Optocouplers, Unidirectional Input Darlington-Transistor Output INTEGRATED CIRCUITS DIVISION Parameter Breakdown Voltage - BVCEO Current Transfer Ratio CTR (typical) Saturation Voltage - VCE(sat) Input Control Current - IF Rating 30 8500 Units VP % 1 1 V mA Description LDA213 is a dual unidirectional-input optocoupler with Darlington-transistor outputs. The LDA213 has a minimum current transfer ratio (CTR) of 300% with a typical value of 8500%. Approvals Features * * * * * * 100mA Continuous Load Rating 3750Vrms Input/Output Isolation Unidirectional Input Small 8-Pin Package, Thru-Hole or Surface Mount Machine Insertable, Wave Solderable Surface Mount Tape & Reel Packaging Available Applications * * * * * * Telecom Switching Tip/Ring Circuits Modem Switching (Laptop, Notebook, Pocket Size) Loop Detect Ringing Detect Current Sensing * UL Recognized Component: File E76270 * CSA Certified Component: Certificate 1175739 * EN/IEC 60950-1 Certified Component: TUV Certificate B 09 07 49410 006 Ordering Information Part Number LDA213 LDA213S LDA213STR Description 8-Pin DIP (50/tube) 8-Pin Surface Mount (50/tube) 8-Pin Surface Mount (1000/Reel) Pin Configuration 1 8 C A 2 7 E K 3 6 C A 4 K Pb DS-LDA213-R04 5 E e3 www.ixysic.com 1 INTEGRATED CIRCUITS DIVISION LDA213 Absolute Maximum Ratings @ 25C Parameter Breakdown Voltage Reverse Input Voltage Input Control Current Peak (10ms) Power Dissipation Input Power Dissipation 1 Phototransistor 2 Isolation Voltage, Input to Output Operational Temperature Storage Temperature 1 Derate linearly 1.33mW / C 2 Derate linearly 2mW / C Ratings 30 5 100 1 Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Units VP V mA A 150 150 3750 -40 to +85 -40 to +125 mW Vrms C C Electrical Characteristics @ 25C Parameter Output Characteristics Phototransistor Breakdown Voltage Phototransistor Dark Current Saturation Voltage Current Transfer Ratio Output Capacitance Input Characteristics Input Control Current Input Voltage Drop Reverse Input Current Common Characteristics Capacitance, Input to Output Conditions Symbol Min Typ Max Units IC = 100A VCEO = 5V, IF = 0mA IC = 3mA, IF = 1mA IF = 1mA, VCE = 2V 50V, f =1MHz BVCEO ICEO VCE(sat) CTR COUT 30 300 - 50 50 8500 3 500 1 30000 - V nA V % pF IC = 3mA, VCE = 2V IF = 5mA VR = 5V IF VF IR 0.9 - 0.07 1.2 - 1 1.4 10 mA V A - CI/O - 3 - pF Switching Characteristics @ 25C Characteristic Turn-On Time Turn-Off Time Symbol ton toff Test Condition VCC=5V, IF=1mA, RL=500 Switching Time Test Circuit Typ 8 345 Units s VCC RL Pulse Width=5ms Duty Cycle=1% IF VCE IF VCE 90% 10% t on 2 www.ixysic.com t off R04 INTEGRATED CIRCUITS DIVISION LDA213 PERFORMANCE DATA @25C (Unless Otherwise Noted)* LED Voltage vs. Current 40 30 20 10 LED Forward Voltage (V) LED Forward Current (mA) 10 1 1.1 1.2 1.3 1.4 1.5 LED Forward Voltage (V) 1.6 1.0 Typical CTR vs. LED Forward Current (VCE=5V) 1.1 1.2 1.3 1.4 1.5 LED Forward Voltage (V) 1.6 Collector Current IC (mA) 25C 10000 85C 5000 IF=20mA IF=10mA IF=5mA 0.20 0 2 4 6 8 LED Forward Current (mA) 10 0.15 0.10 IF=2mA IF=1mA IF=0.5mA 0.05 0 1 2 3 4 Collector Voltage VCE (V) VCE(sat) vs. Temperature (IF=1mA, IC=3mA) IF=5mA IF=2mA IF=1mA -20 0 20 40 60 Temperature (C) 5 100 ICE Current vs. Temperature (VCE=5V) IF=10mA IF=5mA IF=2mA IF=1mA 150 100 50 6 80 IF=0.2mA IF=0.1mA 0 -40 -20 IF=0.5mA 0 20 40 60 Temperature (C) 80 100 1400 1200 Leakage (nA) 0.90 VCE(sat) (V) 1.1 Leakage Current vs. Temperature 0.95 0.85 0.80 0.75 1000 VCC=10V VCC=5V VCC=3V 800 600 400 200 0.70 -40 -20 0 20 40 60 Temperature (C) 80 0 -40 100 1x103 1x104 Load Resistance (:) 1x105 0 20 40 60 Temperature (C) 80 100 15000 Turn-Off Time (Ps) 8.0 7.9 7.8 7.7 7.6 7.5 7.4 7.3 7.2 7.1 7.0 6.9 6.8 1x102 -20 Turn-Off Time vs. Load Resistance (IF=1mA, VCC=5V) Turn-On Time vs. Load Resistance (IF=1mA, VCC=5V) Turn-On Time (Ps) 1.2 200 0.00 0 1.3 250 0.25 15000 1.4 Typical Collector Current vs. Collector Voltage 20000 -40C IF=50mA IF=20mA IF=10mA 1.5 1.0 -40 0.1 1.0 ICE Current (mA) LED Forward Current (mA) 1.6 100 0 CTR (%) LED Forward Voltage vs. Temperature LED Voltage vs. Current (Log) 50 10000 5000 0 1x102 1x103 1x104 Load Resistance (:) 1x105 *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R04 www.ixysic.com 3 INTEGRATED CIRCUITS DIVISION LDA213 Manufacturing Information Moisture Sensitivity All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033. Device Moisture Sensitivity Level (MSL) Rating LDA213 / LDA213S MSL 1 ESD Sensitivity This product is ESD Sensitive, and should be handled according to the industry standard JESD-625. Reflow Profile This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020 must be observed. Device Maximum Temperature x Time LDA213 / LDA213S 250C for 30 seconds Board Wash IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to remove flux residue is acceptable. Since IXYS Integrated Circuits Division employs the use of silicone coating as an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy should not be used. Pb 4 e3 www.ixysic.com R04 INTEGRATED CIRCUITS DIVISION LDA213 Mechanical Dimensions LDA213 2.540 0.127 (0.100 0.005) 9.652 0.381 (0.380 0.015) 8-0.800 DIA. (8-0.031 DIA.) 2.540 0.127 (0.100 0.005) 9.144 0.508 (0.360 0.020) 6.350 0.127 (0.250 0.005) Pin 1 PCB Hole Pattern 7.620 0.254 (0.300 0.010) 6.350 0.127 (0.250 0.005) 0.457 0.076 (0.018 0.003) 3.302 0.051 (0.130 0.002) 7.620 0.127 (0.300 0.005) 7.239 TYP. (0.285) 4.064 TYP (0.160) 0.254 0.0127 (0.010 0.0005) 7.620 0.127 (0.300 0.005) Dimensions mm (inches) 0.813 0.102 (0.032 0.004) LDA213S 9.652 0.381 (0.380 0.015) 2.540 0.127 (0.100 0.005) 6.350 0.127 (0.250 0.005) Pin 1 0.635 0.127 (0.025 0.005) 3.302 0.051 (0.130 0.002) 9.525 0.254 (0.375 0.010) 0.457 0.076 (0.018 0.003) PCB Land Pattern 2.54 (0.10) 8.90 (0.3503) 1.65 (0.0649) 7.620 0.254 (0.300 0.010) 0.254 0.0127 (0.010 0.0005) 0.65 (0.0255) 4.445 0.127 (0.175 0.005) Dimensions mm (inches) 0.813 0.102 (0.032 0.004) R04 www.ixysic.com 5 INTEGRATED CIRCUITS DIVISION LDA213 LDA213STR Tape & Reel 330.2 DIA. (13.00 DIA.) Top Cover Tape Thickness 0.102 MAX. (0.004 MAX.) K0 =4.90 (0.193) K1 =4.20 (0.165) Embossed Carrier Embossment W=16.00 (0.63) Bo=10.30 (0.406) Ao=10.30 (0.406) P=12.00 (0.472) User Direction of Feed Dimensions mm (inches) NOTES: 1. Dimensions carry tolerances of EIA Standard 481-2 2. Tape complies with all "Notes" for constant dimensions listed on page 5 of EIA-481-2 For additional information please visit our website at: www.ixysic.com IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated Circuits Division's Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice. 6 Specification: DS-LDA213-R04 (c)Copyright 2012, IXYS Integrated Circuits Division All rights reserved. Printed in USA. 12/22/2012