TLV431, TLV431A, TLV431B LOW-VOLTAGE ADJUSTABLE PRECISION SHUNT REGULATOR SLVS139T - JULY 1996 - REVISED JUNE 2007 D Low-Voltage Operation . . . VREF = 1.24 V D Adjustable Output Voltage, VO = VREF to 6 V D Reference Voltage Tolerances at 255C D D Low Operational Cathode Current . . . 80 A Typ D 0.25- Typical Output Impedance D Ultra-Small SC-70 Package Offers 40% - 0.5% for TLV431B - 1% for TLV431A - 1.5% for TLV431 Typical Temperature Drift - 4 mV (05C to 705C) - 6 mV (-405C to 855C) - 11 mV (-405C to 1255C) D DBV (SOT-23-5) PACKAGE (TOP VIEW) D (SOIC) PACKAGE (TOP VIEW) CATHODE ANODE ANODE NC 1 8 2 7 3 6 4 5 REF ANODE ANODE NC NC * CATHODE ANODE CATHODE 2 ANODE 1 1 5 ANODE DBZ (SOT-23-3) PACKAGE (TOP VIEW) REF 1 3 2 3 4 REF CATHODE ANODE 2 NC - No internal connection * For TLV431, TLV431A: NC - No internal connection * For TLV431B: Pin 2 is attached to Substrate and must be connected to ANODE or left open. PK (SOT-89) PACKAGE (TOP VIEW) 3 Smaller Footprint Than SOT-23-3 See TLVH431 and TLVH432 for - Wider VKA (1.24 V to 18 V) and IK (80 mA) - Additional SOT-89 Package - Multiple Pinouts for SOT-23-3 and SOT-89 Packages REF DCK (SC-70) PACKAGE (TOP VIEW) CATHODE NC REF 1 6 2 5 3 4 ANODE NC NC LP (TO-92/TO-226) PACKAGE (TOP VIEW) CATHODE ANODE REF NC - No internal connection description/ordering information The TLV431 is a low-voltage 3-terminal adjustable voltage reference with specified thermal stability over applicable industrial and commercial temperature ranges. Output voltage can be set to any value between VREF (1.24 V) and 6 V with two external resistors (see Figure 2). These devices operate from a lower voltage (1.24 V) than the widely used TL431 and TL1431 shunt-regulator references. When used with an optocoupler, the TLV431 is an ideal voltage reference in isolated feedback circuits for 3-V to 3.3-V switching-mode power supplies. These devices have a typical output impedance of 0.25 . Active output circuitry provides a very sharp turn-on characteristic, making them excellent replacements for low-voltage Zener diodes in many applications, including on-board regulation and adjustable power supplies. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright 2007, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 1 TLV431, TLV431A, TLV431B LOW-VOLTAGE ADJUSTABLE PRECISION SHUNT REGULATOR SLVS139T - JULY 1996 - REVISED JUNE 2007 ORDERING INFORMATION TJ 255C VREF TOLERANCE SC 70 (DCK) SC-70 SOT 23 5 (DBV) SOT-23-5 0.5% SOT 23 3 (DBZ) SOT-23-3 SOT-89 (PK) TO 92 (LP) TO-92 0C to 70C SOT 23 5 (DBV) SOT-23-5 1% SOT-23-3 (DBZ) TO 92 (LP) TO-92 SOT 23 5 (DBV) SOT-23-5 1.5% ORDERABLE PART NUMBER PACKAGE SOT-23-3 (DBZ) TO 92 (LP) TO-92 Reel of 3000 TLV431BCDCKR Reel of 250 TLV431BCDCKT Reel of 3000 TLV431BCDBVR Reel of 250 TLV431BCDBVT Reel of 3000 TLV431BCDBZR Reel of 250 TLV431BCDBZT Reel of 1000 TLV431BCPK Bulk of 1000 TLV431BCLP Reel of 2000 TLV431BCLPR Reel of 3000 TLV431ACDBVR Reel of 250 TLV431ACDBVT Reel of 3000 TLV431ACDBZR Bulk of 1000 TLV431ACLP Reel of 2000 TLV431ACLPR Reel of 3000 TLV431CDBVR Reel of 250 TLV431CDBVT Reel of 3000 TLV431CDBZR Bulk of 1000 TLV431CLP Reel of 2000 TLV431CLPR TOP-SIDE MARKING YE YE_ Y3G Y3G_ Y3G Y3G_ VE TV431B YAC YAC_ YAC_ V431AC Y3C Y3C_ Y3C_ V431C Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. DBV/DBZ/DCK: The actual top-side marking has one additional character that designates the wafer fab/assembly site. 2 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TLV431, TLV431A, TLV431B LOW-VOLTAGE ADJUSTABLE PRECISION SHUNT REGULATOR SLVS139T - JULY 1996 - REVISED JUNE 2007 ORDERING INFORMATION (continued) TJ 255C VREF TOLERANCE TLV431BIDCKR Reel of 250 TLV431BIDCKT Reel of 3000 TLV431BIDBVR Reel of 250 TLV431BIDBVT Reel of 3000 TLV431BIDBZR Reel of 250 TLV431BIDBZT Bulk of 1000 TLV431BILP Reel of 2000 TLV431BILPR Tube of 75 TLV431AID Reel of 2500 TLV431AIDR Reel of 3000 TLV431AIDBVR Reel of 250 TLV431AIDBVT SOT-23-3 (DBZ) Reel of 3000 TLV431AIDBZR YAI_ SOT-89 (PK) Reel of 1000 TLV431BIPK VF Bulk of 1000 TLV431AILP Ammo of 2000 TLV431AILPM Reel of 2000 TLV431AILPR Reel of 3000 TLV431IDBVR Reel of 250 TLV431IDBVT Reel of 3000 TLV431IDBZR Bulk of 1000 TLV431ILP Reel of 2000 TLV431ILPR Reel of 3000 TLV431BQDCKR Reel of 250 TLV431BQDCKT Reel of 3000 TLV431BQDBVR Reel of 250 TLV431BQDBVT Reel of 3000 TLV431BQDBZR Reel of 250 TLV431BQDBZT Reel of 1000 TLV431BQPK Bulk of 1000 TLV431BQLP Reel of 2000 TLV431BQLPR SOT 23 5 (DBV) SOT-23-5 0 5% 0.5% SOT 23 3 (DBZ) SOT-23-3 TO 92 (LP) TO-92 SOIC (D) SOT 23 5 (DBV) SOT-23-5 1% TO-92 TO 92 (LP) SOT 23 5 (DBV) SOT-23-5 1.5% SOT-23-3 (DBZ) TO 92 (LP) TO-92 SC 70 (DCK) SC-70 SOT 23 5 (DBV) SOT-23-5 0.5% TOP-SIDE MARKING Reel of 3000 SC 70 (DCK) SC-70 -40C to 85C ORDERABLE PART NUMBER PACKAGE SOT 23 3 (DBZ) SOT-23-3 -40C 125C 40 C to 125 C SOT-89 (PK) TO 92 (LP) TO-92 YF YF_ Y3F Y3F_ Y3F Y3F_ TY431B TY431A YAI YAI_ V431AI Y3I Y3I_ Y3I_ V431I YG YG_ Y3H Y3H_ Y3H Y3H_ V6 TQ431B 1% SOT-89 (PK) Reel of 1000 TLV431AQPK VA 1.5% SOT-89 (PK) Reel of 1000 TLV431QPK VB Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. DBV/DBZ/DCK: The actual top-side marking has one additional character that designates the assembly/test site. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 3 TLV431, TLV431A, TLV431B LOW-VOLTAGE ADJUSTABLE PRECISION SHUNT REGULATOR SLVS139T - JULY 1996 - REVISED JUNE 2007 logic block diagram CATHODE REF + - VREF = 1.24 V ANODE equivalent schematic CATHODE REF ANODE 4 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TLV431, TLV431A, TLV431B LOW-VOLTAGE ADJUSTABLE PRECISION SHUNT REGULATOR SLVS139T - JULY 1996 - REVISED JUNE 2007 absolute maximum ratings over operating free-air temperature range (unless otherwise noted) Cathode voltage, VKA (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V Continuous cathode current range, IK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -20 mA to 20 mA Reference current range, Iref . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.05 mA to 3 mA Package thermal impedance, JA (see Notes 2 and 3): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97C/W DBV package . . . . . . . . . . . . . . . . . . . . . . . . 206C/W DBZ package . . . . . . . . . . . . . . . . . . . . . . . . . 206C/W DCK package . . . . . . . . . . . . . . . . . . . . . . . . 252C/W LP package . . . . . . . . . . . . . . . . . . . . . . . . . . 140C/W PK package . . . . . . . . . . . . . . . . . . . . . . . . . . . 52C/W Operating virtual junction temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150C Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65C to 150C Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. Voltage values are with respect to the anode terminal, unless otherwise noted. 2. Maximum power dissipation is a function of TJ(max), JA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ(max) - TA)/JA. Operating at the absolute maximum TJ of 150C can affect reliability. 3. The package thermal impedance is calculated in accordance with JESD 51-7. recommended operating conditions MIN MAX VKA Cathode voltage VREF 6 V IK Cathode current 0.1 15 mA 0 70 TA Operating p g free-air temperature p range g TLV431_C POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TLV431_I -40 85 TLV431_Q -40 125 UNIT C 5 TLV431, TLV431A, TLV431B LOW-VOLTAGE ADJUSTABLE PRECISION SHUNT REGULATOR SLVS139T - JULY 1996 - REVISED JUNE 2007 TLV431 electrical characteristics at 25C free-air temperature (unless otherwise noted) TLV431 PARAMETER TEST CONDITIONS TA = 25C VREF VKA = VREF, IK = 10 mA Reference voltage TA = full range (see Note 4 and Figure 1) VREF(dev) A VKA = VREF, IK = 10 mA (see Note 4 and Figure 1) TYP MAX 1.222 1.24 1.258 TLV431C 1.21 1.27 TLV431I 1.202 1.278 TLV431Q 1.194 TLV431C i ti over full f ll VREF d deviation temperature range (see Note 4) MIN UNIT V 1.286 4 12 TLV431I 6 20 TLV431Q 11 31 mV VREF VKA Ratio of VREF change in cathode voltage change VKA = VREF to 6 V, IK = 10 mA (see Figure 2) -1.5 -2.7 mV/V Iref Reference terminal current IK = 10 mA, R1 = 10 k, R2 = open (see Figure 2) 0.15 0.5 A TLV431C 0 05 0.05 0 0.3 3 Iref(dev) d i ti over full f ll Iref deviation temperature range (see Note 4) A R1 = 10 k, k R2 = open IK = 10 mA, (see Note 4 and Figure 2) TLV431I 0.1 0.4 TLV431Q 0.15 0.5 A TLV431C/I 55 80 TLV431Q 55 100 VREF = 0, VKA = 6 V (see Figure 3) 0.001 0.1 A VKA = VREF, f 1 kHz, IK = 0.1 mA to 15 mA (see Figure 1) 0.25 0.4 IK(min) Minimum cathode current for regulation VKA = VREF (see Figure 1) IK(off) Off-state cathode current |zKA| Dynamic impedance (see Note 5) A A NOTES: 4. Full temperature ranges are - 40C to 125C for TLV431Q, - 40C to 85C for TLV431I, and 0C to 70C for TLV431C. 5. The deviation parameters VREF(dev) and Iref(dev) are defined as the differences between the maximum and minimum values obtained over the rated temperature range. The average full-range temperature coefficient of the reference input voltage, VREF, is defined as: V REF(dev) 10 6 VREF (T A+25C) V REF ppm + T C A where TA is the rated operating free-air temperature range of the device. VREF can be positive or negative, depending on whether minimum VREF or maximum VREF, respectively, occurs at the lower temperature. V KA 6. The dynamic impedance is defined as z + ka I K When the device is operating with two external resistors (see Figure 2), the total dynamic impedance of the circuit is defined as: z + V [ z 1 ) R1 ka ka I R2 6 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TLV431, TLV431A, TLV431B LOW-VOLTAGE ADJUSTABLE PRECISION SHUNT REGULATOR SLVS139T - JULY 1996 - REVISED JUNE 2007 TLV431A electrical characteristics at 25C free-air temperature (unless otherwise noted) TLV431A PARAMETER TEST CONDITIONS TA = 25C VREF VKA = VREF, IK = 10 mA Reference voltage TA = full range (see Note 3 and Figure 1) VREF(dev) A VKA = VREF, IK = 10 mA (see Note 3 and Figure 1) TYP MAX 1.228 1.24 1.252 TLV431AC 1.221 1.259 TLV431AI 1.215 1.265 TLV431AQ 1.209 TLV431AC i ti over full f ll VREF d deviation temperature range (see Note 4) MIN UNIT V 1.271 4 12 TLV431AI 6 20 TLV431AQ 11 31 mV VREF VKA Ratio of VREF change in cathode voltage change VKA = VREF to 6 V, IK = 10 mA (see Figure 2) -1.5 -2.7 mV/V Iref Reference terminal current IK = 10 mA, R1 = 10 k, R2 = open (see Figure 2) 0.15 0.5 A TLV431AC 0.05 0.3 Iref(dev) Iref deviation d i ti over full f ll temperature range (see Note 4) IK = 10 mA, A R1 = 10 k, k R2 = open (see Note 3 and Figure 2) TLV431AI 0.1 0.4 TLV431AQ 0.15 0.5 A TLV431AC/AI 55 80 TLV431AQ 55 100 VREF = 0, VKA = 6 V (see Figure 3) 0.001 0.1 A VKA = VREF, f 1 kHz, IK = 0.1 mA to 15 mA (see Figure 1) 0.25 0.4 IK(min) Minimum cathode current for regulation VKA = VREF (see Figure 1) IK(off) Off-state cathode current |zKA| Dynamic impedance (see Note 5) A A NOTES: 3. Full temperature ranges are - 40C to 125C for TLV431AQ, - 40C to 85C for TLV431AI, and 0C to 70C for TLV431AC. 4. The deviation parameters VREF(dev) and Iref(dev) are defined as the differences between the maximum and minimum values obtained over the rated temperature range. The average full-range temperature coefficient of the reference input voltage, VREF, is defined as: V REF(dev) 10 6 VREF (T A+25C) V REF ppm + T C A where TA is the rated operating free-air temperature range of the device. VREF can be positive or negative, depending on whether minimum VREF or maximum VREF, respectively, occurs at the lower temperature. V KA 5. The dynamic impedance is defined as z + ka I K When the device is operating with two external resistors (see Figure 2), the total dynamic impedance of the circuit is defined as: z + V [ z 1 ) R1 ka ka I R2 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 7 TLV431, TLV431A, TLV431B LOW-VOLTAGE ADJUSTABLE PRECISION SHUNT REGULATOR SLVS139T - JULY 1996 - REVISED JUNE 2007 TLV431B electrical characteristics at 25C free-air temperature (unless otherwise noted) TLV431B PARAMETER TEST CONDITIONS TA = 25C VREF VKA = VREF, IK = 10 mA Reference voltage TA = full range (see Note 3 and Figure 1) VREF(dev) A VKA = VREF, IK = 10 mA (see Note 3 and Figure 1) TYP MAX 1.234 1.24 1.246 TLV431BC 1.227 1.253 TLV431BI 1.224 1.259 TLV431BQ 1.221 TLV431BC i ti over full f ll VREF d deviation temperature range (see Note 4) MIN UNIT V 1.265 4 12 TLV431BI 6 20 TLV431BQ 11 31 -1.5 -2.7 mV/V 0.1 0.5 A TLV431BC 0.05 0.3 TLV431BI 0.1 0.4 TLV431BQ 0.15 0.5 55 100 A VREF VKA Ratio of VREF change in cathode voltage change VKA = VREF to 6 V, IK = 10 mA (see Figure 2) Iref Reference terminal current IK = 10 mA, R1 = 10 k, R2 = open (see Figure 2) Iref(dev) Iref deviation d i ti over full f ll temperature range (see Note 4) IK = 10 mA, A R1 = 10 k, k R2 = open (see Note 3 and Figure 2) mV A IK(min) Minimum cathode current for regulation VKA = VREF (see Figure 1) IK(off) Off-state cathode current VREF = 0, VKA = 6 V (see Figure 3) 0.001 0.1 A |zKA| Dynamic impedance (see Note 5) VKA = VREF, f 1 kHz, IK = 0.1 mA to 15 mA (see Figure 1) 0.25 0.4 NOTES: 3. Full temperature ranges are - 40C to 125C for TLV431BQ, - 40C to 85C for TLV431BI, and 0C to 70C for TLV431BC. 4. The deviation parameters VREF(dev) and Iref(dev) are defined as the differences between the maximum and minimum values obtained over the rated temperature range. The average full-range temperature coefficient of the reference input voltage, VREF, is defined as: V REF(dev) 10 6 VREF (T A+25C) ppm V REF + T C A where TA is the rated operating free-air temperature range of the device. VREF can be positive or negative, depending on whether minimum VREF or maximum VREF, respectively, occurs at the lower temperature. V KA 5. The dynamic impedance is defined as z ka + I K When the device is operating with two external resistors (see Figure 2), the total dynamic impedance of the circuit is defined as: z + V [ z 1 ) R1 ka ka I R2 8 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TLV431, TLV431A, TLV431B LOW-VOLTAGE ADJUSTABLE PRECISION SHUNT REGULATOR SLVS139T - JULY 1996 - REVISED JUNE 2007 PARAMETER MEASUREMENT INFORMATION Input Input VO VO IK IK R1 R2 VREF Figure 1. Test Circuit for VKA = VREF, VO = VKA = VREF Input Iref VREF Figure 2. Test Circuit for VKA > VREF, VO = VKA = VREF x (1 + R1/R2) + Iref x R1 VO IK(off) Figure 3. Test Circuit for IK(off) POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 9 TLV431, TLV431A, TLV431B LOW-VOLTAGE ADJUSTABLE PRECISION SHUNT REGULATOR SLVS139T - JULY 1996 - REVISED JUNE 2007 PARAMETER MEASUREMENT INFORMATION REFERENCE VOLTAGE vs JUNCTION TEMPERATURE 1.254 IK = 10 mA V ref - Reference Voltage - V 1.252 1.250 1.248 1.246 1.244 1.242 1.240 1.238 -50 -25 0 25 50 75 100 125 150 TJ - Junction Temperature - C Figure 4 REFERENCE INPUT CURRENT vs JUNCTION TEMPERATURE (for TLV431 and TLV431A) REFERENCE INPUT CURRENT vs JUNCTION TEMPERATURE (for TLV431B) 250 IK = 10 mA R1 = 10 k R2 = Open 230 I ref - Reference Input Current - nA I ref - Reference Input Current - nA 250 200 150 100 210 IK = 10 mA R1 = 10 k R2 = Open 190 170 150 130 110 90 70 50 -50 -25 0 25 50 75 100 125 TJ - Junction Temperature - C Figure 5A 10 50 -50 150 -25 0 25 50 75 100 125 150 TJ - Junction Temperature - C Figure 5 Figure 5B Operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TLV431, TLV431A, TLV431B LOW-VOLTAGE ADJUSTABLE PRECISION SHUNT REGULATOR SLVS139T - JULY 1996 - REVISED JUNE 2007 PARAMETER MEASUREMENT INFORMATION CATHODE CURRENT vs CATHODE VOLTAGE CATHODE CURRENT vs CATHODE VOLTAGE 15 250 VKA = VREF TA = 25C VKA = VREF TA = 25C 200 10 I K - Cathode Current - A I K - Cathode Current - mA 150 5 0 -5 100 50 0 -50 -100 -150 -10 -200 -15 -1 -0.5 0 0.5 1 VKA - Cathode Voltage - V -250 -1 1.5 -0.5 0 0.5 1 VKA - Cathode Voltage - V Figure 6 Figure 7 OFF-STATE CATHODE CURRENT vs JUNCTION TEMPERATURE (for TLV431 and TLV431A) OFF-STATE CATHODE CURRENT vs JUNCTION TEMPERATURE (for TLV431B) 3000 VKA = 5 V VREF = 0 I K(off) - Off-State Cathode Current - nA I K(off) - Off-State Cathode Current - nA 40 30 20 10 0 -50 -25 0 25 50 75 100 125 2500 VKA = 6 V VREF = 0 2000 1500 1000 500 0 -50 150 -25 Figure 8A 0 25 50 75 100 125 150 TJ - Junction Temperature - C TJ - Junction Temperature - C 1.5 Figure 8 Figure 8B Operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 11 TLV431, TLV431A, TLV431B LOW-VOLTAGE ADJUSTABLE PRECISION SHUNT REGULATOR SLVS139T - JULY 1996 - REVISED JUNE 2007 PARAMETER MEASUREMENT INFORMATION RATIO OF DELTA REFERENCE VOLTAGE TO DELTA CATHODE VOLTAGE vs JUNCTION TEMPERATURE (for TLV431 and TLV431A) RATIO OF DELTA REFERENCE VOLTAGE TO DELTA CATHODE VOLTAGE vs JUNCTION TEMPERATURE (for TLV431B) 0.0 0 V ref/ V KA - Ratio of Delta Reference Voltage to Delta Cathode Voltage - mV/V V ref/ V KA - Ratio of Delta Reference Voltage to Delta Cathode Voltage - mV/V 0 -0.1 -0.2 -0.3 -0.4 -0.5 -0.6 -0.7 -0.8 -50 IK = 10 mA VKA = VREF to 6 V -25 0 25 50 75 100 125 150 -0.1 IK = 10 mA VKA = VREF to 6 V -0.2 -0.3 -0.4 -0.5 -0.6 -0.7 -0.8 -0.9 -1 -1.0 -50 -25 TJ - Junction Temperature - C Figure 9A 0 25 50 75 100 125 150 TJ - Junction Temperature - C Figure 9B Figure 9 PERCENTAGE CHANGE IN VREF vs OPERATING LIFE AT 55C 0.025 V ref - % Percentage Change in Vref IK = 1 mA 0 % Change (avg) -0.025 % Change (3) -0.05 -0.075 -0.1 % Change (-3) -0.125 0 10 20 30 40 50 60 Operating Life at 55C - kh Extrapolated from life-test data taken at 125C; the activation energy assumed is 0.7 eV. Figure 10 12 Operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TLV431, TLV431A, TLV431B LOW-VOLTAGE ADJUSTABLE PRECISION SHUNT REGULATOR SLVS139T - JULY 1996 - REVISED JUNE 2007 PARAMETER MEASUREMENT INFORMATION EQUIVALENT INPUT NOISE VOLTAGE vs FREQUENCY 3V Vn - Equivalent Input Noise Voltage - nV/ Hz 350 VKA = VREF IK = 1 mA TA = 25C 1 k 300 470 F + 250 TLV431 or TLV431A or TLV431B 200 750 2200 F + 820 TLE2027 + _ TP 160 k 160 TEST CIRCUIT FOR EQUIVALENT INPUT NOISE VOLTAGE 150 10 100 1k 10k 100k f - Frequency - Hz Figure 11 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 13 TLV431, TLV431A, TLV431B LOW-VOLTAGE ADJUSTABLE PRECISION SHUNT REGULATOR SLVS139T - JULY 1996 - REVISED JUNE 2007 PARAMETER MEASUREMENT INFORMATION EQUIVALENT INPUT NOISE VOLTAGE OVER A 10-s PERIOD Vn - Equivalent Input Noise Voltage - V 10 f = 0.1 Hz to 10 Hz IK = 1 mA TA = 25C 8 6 4 2 0 -2 -4 -6 -8 -10 0 2 4 6 8 10 t - Time - s 3V 1 k 470 F + 750 0.47 F 2200 F + 820 TLV431 or TLV431A or TLV431B TLE2027 10 k + _ 10 k 1 F 160 k TLE2027 + _ 2.2 F + CRO 1 M 33 k 16 0.1 F 33 k TEST CIRCUIT FOR 0.1-Hz TO 10-Hz EQUIVALENT NOISE VOLTAGE Figure 12 14 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TP TLV431, TLV431A, TLV431B LOW-VOLTAGE ADJUSTABLE PRECISION SHUNT REGULATOR SLVS139T - JULY 1996 - REVISED JUNE 2007 PARAMETER MEASUREMENT INFORMATION 80 0 IK = 10 mA TA = 25C 70 36 60 72 50 108 40 144 30 180 Phase Shift A V - Small-Signal Voltage Gain/Phase Margin - dB SMALL-SIGNAL VOLTAGE GAIN/PHASE MARGIN vs FREQUENCY Output IK 6.8 k 180 10 F 5V 4.3 k 20 10 GND 0 -10 -20 100 TEST CIRCUIT FOR VOLTAGE GAIN AND PHASE MARGIN 1k 10k 100k 1M f - Frequency - Hz Figure 13 REFERENCE IMPEDANCE vs FREQUENCY 100 |z ka | - Reference Impedance - IK = 0.1 mA to 15 mA TA = 25C 100 Output 10 IK 100 1 - + GND 0.1 TEST CIRCUIT FOR REFERENCE IMPEDANCE 0.01 1k 10k 100k 1M 10M f - Frequency - Hz Figure 14 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 15 TLV431, TLV431A, TLV431B LOW-VOLTAGE ADJUSTABLE PRECISION SHUNT REGULATOR SLVS139T - JULY 1996 - REVISED JUNE 2007 PARAMETER MEASUREMENT INFORMATION PULSE RESPONSE 1 3.5 3 Input and Output Voltage - V R = 18 k TA = 25C Input 18 k Output 2.5 Ik 2 1.5 Pulse Generator f = 100 kHz Output 50 1 GND 0.5 0 TEST CIRCUIT FOR PULSE RESPONSE 1 -0.5 0 1 2 3 4 5 6 7 8 t - Time - s Figure 15 PULSE RESPONSE 2 3.5 3 Input and Output Voltage - V R = 1.8 k TA = 25C Input 1.8 k Output 2.5 IK 2 1.5 Pulse Generator f = 100 kHz Output 1 GND 0.5 0 TEST CIRCUIT FOR PULSE RESPONSE 2 -0.5 0 1 2 3 4 5 6 7 8 t - Time - s Figure 16 16 50 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TLV431, TLV431A, TLV431B LOW-VOLTAGE ADJUSTABLE PRECISION SHUNT REGULATOR SLVS139T - JULY 1996 - REVISED JUNE 2007 PARAMETER MEASUREMENT INFORMATION STABILITY BOUNDARY CONDITION (for TLV431B) STABILITY BOUNDARY CONDITION (for TLV431 and TLV431A) 15 15 TA = 25C IK = 15 mA Max VKA = VREF 12 9 Stable Stable VKA = 2 V 6 VKA = 3 V VKA = 3 V 0.1 1 TA = 25C IK = 15 mA MAX For VKA = VREF , Stable for CL = 1 pF to 10k nF 0 0.001 10 0.01 CL - Load Capacitance - F 1 10 150 IK IK + - R1 = 10 k CL Vbat R2 TEST CIRCUIT FOR VKA = VREF 0.1 CL - Load Capacitance - F 150 CL Unstable 6 3 0.01 VKA = 2 V 9 3 0 0.001 Stable Stable I K - Cathode Current - mA I K - Cathode Current - mA 12 + - Vbat TEST CIRCUIT FOR VKA = 2 V, 3 V The areas under the curves represent conditions that may cause the device to oscillate. For VKA = 2-V and 3-V curves, R2 and Vbat were adjusted to establish the initial VKA and IK conditions with CL = 0. Vbat and CL then were adjusted to determine the ranges of stability. Figure 17 Operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 17 TLV431, TLV431A, TLV431B LOW-VOLTAGE ADJUSTABLE PRECISION SHUNT REGULATOR SLVS139T - JULY 1996 - REVISED JUNE 2007 APPLICATION INFORMATION ~ VI 120 V - + P ~ VO 3.3 V P P Gate Drive VCC Controller VFB TLV431 or TLV431A or TLV431B Current Sense GND P P P P Figure 18. Flyback With Isolation Using TLV431, TLV431A, or TLV431B as Voltage Reference and Error Amplifier Figure 18 shows the TLV431, TLV431A, or TLV431B used in a 3.3-V isolated flyback supply. Output voltage VO can be as low as reference voltage VREF (1.24 V 1%). The output of the regulator, plus the forward voltage drop of the optocoupler LED (1.24 + 1.4 = 2.64 V), determine the minimum voltage that can be regulated in an isolated supply configuration. Regulated voltage as low as 2.7 Vdc is possible in the topology shown in Figure 18. 18 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 PACKAGE OPTION ADDENDUM www.ti.com 20-Oct-2011 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp Samples (Requires Login) TLV431ACDBVR ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431ACDBVRE4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431ACDBVRG4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431ACDBVT ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431ACDBVTE4 ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431ACDBVTG4 ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431ACDBZR ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431ACDBZRG4 ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431ACLP ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV431ACLPE3 ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV431ACLPR ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV431ACLPRE3 ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV431AID ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431AIDBVR ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431AIDBVRE4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431AIDBVRG4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431AIDBVT ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431AIDBVTE4 ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Addendum-Page 1 (3) PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 20-Oct-2011 Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp (3) TLV431AIDBVTG4 ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431AIDBZR ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431AIDBZRG4 ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431AIDE4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431AIDG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431AIDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431AIDRE4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431AIDRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431AILP ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV431AILPE3 ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV431AILPM ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV431AILPME3 ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV431AILPR ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV431AILPRE3 ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV431AQPK ACTIVE SOT-89 PK 3 1000 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1 YEAR TLV431AQPKG3 ACTIVE SOT-89 PK 3 1000 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1 YEAR TLV431BCDBVR ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BCDBVRE4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BCDBVRG4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BCDBVT ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Addendum-Page 2 Samples (Requires Login) PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 20-Oct-2011 Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp (3) TLV431BCDBVTE4 ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BCDBVTG4 ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BCDBZR ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BCDBZRG4 ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BCDBZT ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BCDBZTG4 ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BCDCKR ACTIVE SC70 DCK 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BCDCKRE4 ACTIVE SC70 DCK 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BCDCKRG4 ACTIVE SC70 DCK 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BCDCKT ACTIVE SC70 DCK 6 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BCDCKTE4 ACTIVE SC70 DCK 6 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BCDCKTG4 ACTIVE SC70 DCK 6 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BCLP ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV431BCLPE3 ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV431BCLPR ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV431BCLPRE3 ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV431BCPK ACTIVE SOT-89 PK 3 1000 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1 YEAR TLV431BCPKG3 ACTIVE SOT-89 PK 3 1000 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1 YEAR TLV431BIDBVR ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) Addendum-Page 3 Samples (Requires Login) CU NIPDAU Level-1-260C-UNLIM PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 20-Oct-2011 Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp Samples (Requires Login) TLV431BIDBVRE4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BIDBVRG4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BIDBVT ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BIDBVTE4 ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BIDBVTG4 ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BIDBZR ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BIDBZRG4 ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BIDBZT ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BIDBZTG4 ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BIDCKR ACTIVE SC70 DCK 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BIDCKRE4 ACTIVE SC70 DCK 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BIDCKRG4 ACTIVE SC70 DCK 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BIDCKT ACTIVE SC70 DCK 6 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BIDCKTE4 ACTIVE SC70 DCK 6 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BIDCKTG4 ACTIVE SC70 DCK 6 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BILP ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV431BILPE3 ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV431BILPR ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV431BILPRE3 ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type Addendum-Page 4 (3) PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 20-Oct-2011 Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp (3) TLV431BIPK ACTIVE SOT-89 PK 3 1000 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1 YEAR TLV431BIPKG3 ACTIVE SOT-89 PK 3 1000 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1 YEAR TLV431BQDBVR ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BQDBVRE4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BQDBVRG4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BQDBVT ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BQDBVTE4 ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BQDBVTG4 ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BQDBZR ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BQDBZRG4 ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BQDBZT ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BQDBZTG4 ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BQDCKR ACTIVE SC70 DCK 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BQDCKRE4 ACTIVE SC70 DCK 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BQDCKRG4 ACTIVE SC70 DCK 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BQDCKT ACTIVE SC70 DCK 6 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BQDCKTE4 ACTIVE SC70 DCK 6 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BQDCKTG4 ACTIVE SC70 DCK 6 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Addendum-Page 5 Samples (Requires Login) PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 20-Oct-2011 Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp (3) TLV431BQLP ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV431BQLPE3 ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV431BQLPR ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV431BQLPRE3 ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV431BQPK ACTIVE SOT-89 PK 3 1000 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1 YEAR TLV431BQPKG3 ACTIVE SOT-89 PK 3 1000 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1 YEAR Call TI Call TI TBD TLV431CDBV OBSOLETE SOT-23 DBV 5 TLV431CDBVR ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431CDBVRE4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431CDBVRG4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431CDBVT ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431CDBVTE4 ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431CDBVTG4 ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431CDBZR ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431CDBZRG4 ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431CLP ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV431CLPE3 ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV431CLPM ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV431CLPME3 ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV431CLPR ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV431CLPRE3 ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV431IDBV OBSOLETE SOT-23 DBV 5 TBD Call TI Call TI TLV431IDBVR ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) Addendum-Page 6 Samples (Requires Login) CU NIPDAU Level-1-260C-UNLIM PACKAGE OPTION ADDENDUM www.ti.com 20-Oct-2011 Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp (3) Samples (Requires Login) TLV431IDBVRE4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431IDBVRG4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431IDBVT ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431IDBVTE4 ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431IDBVTG4 ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431IDBZR ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431IDBZRG4 ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431ILP ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV431ILPE3 ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV431ILPR ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV431ILPRE3 ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV431QPK ACTIVE SOT-89 PK 3 1000 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1 YEAR TLV431QPKG3 ACTIVE SOT-89 PK 3 1000 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1 YEAR (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Addendum-Page 7 PACKAGE OPTION ADDENDUM www.ti.com 20-Oct-2011 Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. OTHER QUALIFIED VERSIONS OF TLV431A, TLV431B : * Automotive: TLV431A-Q1, TLV431B-Q1 NOTE: Qualified Version Definitions: * Automotive - Q100 devices qualified for high-reliability automotive applications targeting zero defects Addendum-Page 8 PACKAGE MATERIALS INFORMATION www.ti.com 23-Aug-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) TLV431ACDBVR SOT-23 DBV 5 3000 180.0 9.2 TLV431ACDBVR SOT-23 DBV 5 3000 178.0 TLV431ACDBVT SOT-23 DBV 5 250 180.0 TLV431ACDBVT SOT-23 DBV 5 250 TLV431ACDBZR SOT-23 DBZ 3 TLV431ACDBZR SOT-23 DBZ TLV431AIDBVR SOT-23 DBV TLV431AIDBVR SOT-23 TLV431AIDBVT TLV431AIDBVT TLV431AIDBZR W Pin1 (mm) Quadrant 3.17 3.23 1.37 4.0 8.0 Q3 9.0 3.23 3.17 1.37 4.0 8.0 Q3 9.2 3.17 3.23 1.37 4.0 8.0 Q3 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3 3000 179.0 8.4 3.15 2.95 1.22 4.0 8.0 Q3 3 3000 180.0 8.4 3.15 2.77 1.22 4.0 8.0 Q3 5 3000 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3 DBV 5 3000 180.0 9.2 3.17 3.23 1.37 4.0 8.0 Q3 SOT-23 DBV 5 250 180.0 9.2 3.17 3.23 1.37 4.0 8.0 Q3 SOT-23 DBV 5 250 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3 SOT-23 DBZ 3 3000 179.0 8.4 3.15 2.95 1.22 4.0 8.0 Q3 TLV431AIDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 TLV431AQPK SOT-89 PK 3 1000 180.0 12.4 4.91 4.52 1.9 8.0 12.0 Q3 TLV431BCDBVR SOT-23 DBV 5 3000 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3 TLV431BCDBVT SOT-23 DBV 5 250 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3 TLV431BCDBZR SOT-23 DBZ 3 3000 179.0 8.4 3.15 2.95 1.22 4.0 8.0 Q3 TLV431BCDBZT SOT-23 DBZ 3 250 179.0 8.4 3.15 2.95 1.22 4.0 8.0 Q3 TLV431BCDCKR SC70 DCK 6 3000 179.0 8.4 2.2 2.5 1.2 4.0 8.0 Q3 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 23-Aug-2012 Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant TLV431BCDCKT SC70 DCK 6 250 179.0 8.4 2.2 2.5 1.2 4.0 8.0 Q3 TLV431BCPK SOT-89 PK 3 1000 180.0 12.4 4.91 4.52 1.9 8.0 12.0 Q3 TLV431BIDBVR SOT-23 DBV 5 3000 179.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 TLV431BIDBVT SOT-23 DBV 5 250 179.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 TLV431BIDBZR SOT-23 DBZ 3 3000 180.0 8.4 3.15 2.77 1.22 4.0 8.0 Q3 TLV431BIDBZR SOT-23 DBZ 3 3000 179.0 8.4 3.15 2.95 1.22 4.0 8.0 Q3 TLV431BIDBZR SOT-23 DBZ 3 3000 178.0 9.2 3.08 2.8 1.27 4.0 8.0 Q3 TLV431BIDBZT SOT-23 DBZ 3 250 179.0 8.4 3.15 2.95 1.22 4.0 8.0 Q3 TLV431BIDCKR SC70 DCK 6 3000 179.0 8.4 2.2 2.5 1.2 4.0 8.0 Q3 TLV431BIDCKT SC70 DCK 6 250 179.0 8.4 2.2 2.5 1.2 4.0 8.0 Q3 TLV431BIPK SOT-89 PK 3 1000 180.0 12.4 4.91 4.52 1.9 8.0 12.0 Q3 TLV431BQDBVR SOT-23 DBV 5 3000 179.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 TLV431BQDBVT SOT-23 DBV 5 250 179.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 TLV431BQDBZR SOT-23 DBZ 3 3000 180.0 8.4 3.15 2.77 1.22 4.0 8.0 Q3 TLV431BQDBZR SOT-23 DBZ 3 3000 179.0 8.4 3.15 2.95 1.22 4.0 8.0 Q3 TLV431BQDBZT SOT-23 DBZ 3 250 179.0 8.4 3.15 2.95 1.22 4.0 8.0 Q3 TLV431BQDCKR SC70 DCK 6 3000 179.0 8.4 2.2 2.5 1.2 4.0 8.0 Q3 TLV431BQDCKT SC70 DCK 6 250 179.0 8.4 2.2 2.5 1.2 4.0 8.0 Q3 TLV431BQPK SOT-89 PK 3 1000 180.0 12.4 4.91 4.52 1.9 8.0 12.0 Q3 TLV431CDBVR SOT-23 DBV 5 3000 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3 TLV431CDBVT SOT-23 DBV 5 250 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3 TLV431CDBZR SOT-23 DBZ 3 3000 179.0 8.4 3.15 2.95 1.22 4.0 8.0 Q3 TLV431IDBVR SOT-23 DBV 5 3000 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3 TLV431IDBVT SOT-23 DBV 5 250 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3 TLV431IDBZR SOT-23 DBZ 3 3000 179.0 8.4 3.15 2.95 1.22 4.0 8.0 Q3 TLV431QPK SOT-89 PK 3 1000 180.0 12.4 4.91 4.52 1.9 8.0 12.0 Q3 Pack Materials-Page 2 PACKAGE MATERIALS INFORMATION www.ti.com 23-Aug-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TLV431ACDBVR SOT-23 DBV 5 3000 205.0 200.0 33.0 TLV431ACDBVR SOT-23 DBV 5 3000 180.0 180.0 18.0 TLV431ACDBVT SOT-23 DBV 5 250 205.0 200.0 33.0 TLV431ACDBVT SOT-23 DBV 5 250 180.0 180.0 18.0 TLV431ACDBZR SOT-23 DBZ 3 3000 203.0 203.0 35.0 TLV431ACDBZR SOT-23 DBZ 3 3000 202.0 201.0 28.0 TLV431AIDBVR SOT-23 DBV 5 3000 180.0 180.0 18.0 TLV431AIDBVR SOT-23 DBV 5 3000 205.0 200.0 33.0 TLV431AIDBVT SOT-23 DBV 5 250 205.0 200.0 33.0 TLV431AIDBVT SOT-23 DBV 5 250 180.0 180.0 18.0 TLV431AIDBZR SOT-23 DBZ 3 3000 203.0 203.0 35.0 TLV431AIDR SOIC D 8 2500 340.5 338.1 20.6 TLV431AQPK SOT-89 PK 3 1000 340.0 340.0 38.0 TLV431BCDBVR SOT-23 DBV 5 3000 180.0 180.0 18.0 TLV431BCDBVT SOT-23 DBV 5 250 180.0 180.0 18.0 TLV431BCDBZR SOT-23 DBZ 3 3000 203.0 203.0 35.0 TLV431BCDBZT SOT-23 DBZ 3 250 203.0 203.0 35.0 TLV431BCDCKR SC70 DCK 6 3000 203.0 203.0 35.0 TLV431BCDCKT SC70 DCK 6 250 203.0 203.0 35.0 TLV431BCPK SOT-89 PK 3 1000 340.0 340.0 38.0 Pack Materials-Page 3 PACKAGE MATERIALS INFORMATION www.ti.com 23-Aug-2012 Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TLV431BIDBVR SOT-23 DBV 5 3000 203.0 203.0 35.0 TLV431BIDBVT SOT-23 DBV 5 250 203.0 203.0 35.0 TLV431BIDBZR SOT-23 DBZ 3 3000 202.0 201.0 28.0 TLV431BIDBZR SOT-23 DBZ 3 3000 203.0 203.0 35.0 TLV431BIDBZR SOT-23 DBZ 3 3000 180.0 180.0 18.0 TLV431BIDBZT SOT-23 DBZ 3 250 203.0 203.0 35.0 TLV431BIDCKR SC70 DCK 6 3000 203.0 203.0 35.0 TLV431BIDCKT SC70 DCK 6 250 203.0 203.0 35.0 TLV431BIPK SOT-89 PK 3 1000 340.0 340.0 38.0 TLV431BQDBVR SOT-23 DBV 5 3000 203.0 203.0 35.0 TLV431BQDBVT SOT-23 DBV 5 250 203.0 203.0 35.0 TLV431BQDBZR SOT-23 DBZ 3 3000 202.0 201.0 28.0 TLV431BQDBZR SOT-23 DBZ 3 3000 203.0 203.0 35.0 TLV431BQDBZT SOT-23 DBZ 3 250 203.0 203.0 35.0 TLV431BQDCKR SC70 DCK 6 3000 203.0 203.0 35.0 TLV431BQDCKT SC70 DCK 6 250 203.0 203.0 35.0 TLV431BQPK SOT-89 PK 3 1000 340.0 340.0 38.0 TLV431CDBVR SOT-23 DBV 5 3000 180.0 180.0 18.0 TLV431CDBVT SOT-23 DBV 5 250 180.0 180.0 18.0 TLV431CDBZR SOT-23 DBZ 3 3000 203.0 203.0 35.0 TLV431IDBVR SOT-23 DBV 5 3000 180.0 180.0 18.0 TLV431IDBVT SOT-23 DBV 5 250 180.0 180.0 18.0 TLV431IDBZR SOT-23 DBZ 3 3000 203.0 203.0 35.0 TLV431QPK SOT-89 PK 3 1000 340.0 340.0 38.0 Pack Materials-Page 4 MECHANICAL DATA MSOT002A - OCTOBER 1994 - REVISED NOVEMBER 2001 LP (O-PBCY-W3) PLASTIC CYLINDRICAL PACKAGE 0.205 (5,21) 0.175 (4,44) 0.165 (4,19) 0.125 (3,17) DIA 0.210 (5,34) 0.170 (4,32) Seating Plane 0.157 (4,00) MAX 0.050 (1,27) C 0.500 (12,70) MIN 0.104 (2,65) FORMED LEAD OPTION 0.022 (0,56) 0.016 (0,41) 0.016 (0,41) 0.014 (0,35) STRAIGHT LEAD OPTION D 0.135 (3,43) MIN 0.105 (2,67) 0.095 (2,41) 0.055 (1,40) 0.045 (1,14) 1 2 3 0.105 (2,67) 0.080 (2,03) 0.105 (2,67) 0.080 (2,03) 4040001-2 /C 10/01 NOTES: A. All linear dimensions are in inches (millimeters). B. This drawing is subject to change without notice. C. Lead dimensions are not controlled within this area D. FAlls within JEDEC TO -226 Variation AA (TO-226 replaces TO-92) E. Shipping Method: Straight lead option available in bulk pack only. Formed lead option available in tape & reel or ammo pack. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 1 MECHANICAL DATA MSOT002A - OCTOBER 1994 - REVISED NOVEMBER 2001 LP (O-PBCY-W3) PLASTIC CYLINDRICAL PACKAGE 0.539 (13,70) 0.460 (11,70) 1.260 (32,00) 0.905 (23,00) 0.650 (16,50) 0.610 (15,50) 0.020 (0,50) MIN 0.098 (2,50) 0.384 (9,75) 0.335 (8,50) 0.748 (19,00) 0.217 (5,50) 0.433 (11,00) 0.335 (8,50) 0.748 (19,00) 0.689 (17,50) 0.114 (2,90) 0.094 (2,40) 0.114 (2,90) 0.094 (2,40) 0.169 (4,30) 0.146 (3,70) DIA 0.266 (6,75) 0.234 (5,95) 0.512 (13,00) 0.488 (12,40) TAPE & REEL 4040001-3 /C 10/01 NOTES: A. All linear dimensions are in inches (millimeters). B. This drawing is subject to change without notice. C. Tape and Reel information for the Format Lead Option package. 2 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46C and to discontinue any product or service per JESD48B. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as "components") are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI's terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers' products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers' products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI's goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or "enhanced plastic" are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such components to meet such requirements. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP(R) Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Mobile Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2012, Texas Instruments Incorporated