109D
www.vishay.com Vishay
Revision: 03-Apr-2019 1Document Number: 40023
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Wet Tantalum Capacitors Sintered Anode TANTALEX™ Capacitors
for Operation to +125 °C, Elastomer-Sealed
FEATURES
• Axial through-hole terminations: standard tin /
lead (SnPb), 100 % tin (RoHS-compliant)
available
• Vishay Sprague model 109D tubular
elastomer-sealed, sintered anode TANTALEX
capacitors fill the basic requirements for
applications where a superior quality, reliable
design for industrial, automotive and
telecommunications application is desired
• Model 109D capacitors are the commercial
equivalents of Tansitor style WC, UWC, Mallory-NACC
style TLS, TLH and the military style CL64 and CL65,
designed to meet the performance requirements of
military specification MIL-DTL-3965
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
*
This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details
PERFORMANCE CHARACTERISTICS
Operating Temperature: -55 °C to +85 °C
(to +125 °C with voltage derating)
Capacitance Tolerance: at 120 Hz, +25 °C.
± 20 % standard. ± 10 %, ± 5 % available as special.
DC Leakage Current (DCL max.):
at +25 °C, +85 °C, +125 °C: leakage current shall not exceed
the values listed in the Standard Ratings tables.
Life Test: capacitors are capable of withstanding a
2000 h life test at a temperature of +85 °C or +125 °C at the
applicable DC working voltage.
Following the life test:
1. DCL shall not exceed the initial requirements or 1 μA,
whichever is greater.
2. The ESR shall meet the initial requirement.
3. Change in capacitance shall not exceed 10 % from the
initial measurement. For capacitors with voltage ratings
of 15 VDC and below, change in capacitance shall not
exceed + 10 %, - 25 % from the initial measurement.
Note
• Packaging: the use of formed plastic trays for packaging these axial lead components is standard. Tape and reel is not available due to the
unit weight
Available
Available
Available
ORDERING INFORMATION
109D 207 X0 006 C 0 E3
MODEL CAPACITANCE CAPACITANCE
TOLERANCE
DC VOLTAGE RATING
AT +85 °C
CASE
CODE
STYLE NUMBER RoHS-COMPLIANT
This is expressed
in picofarads. The
first two digits are
the significant
figures. The third is
the number of
zeros to follow
X0 = ± 20 %
X9 = ± 10 %
X5 = ± 5 %
special order
This is expressed in volts.
To complete the
three-digit block, zeros
precede the voltage
rating. A decimal point is
indicated by an “R”
(6R3 = 6.3 V)
See
Ratings
and Case
Codes
table
0 = no outer sleeve
Standard
2 = outer plastic film
insulation
E3 = 100 % tin
termination
(RoHS-compliant)
Blank = SnPb
termination
(standard design)
109D
www.vishay.com Vishay
Revision: 03-Apr-2019 2Document Number: 40023
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
(1) For reference only
(2) Replaces previous W case
DIMENSIONS in inches [millimeters]
CASE
CODE
BARE TUBE WITH PLASTIC-FILM
INSULATING SLEEVE LEAD LENGTH
D L D MAX. L
(1)
C 0.188 ± 0.016 [4.78 ± 0.41] 0.453 + 0.031 / - 0.016 [11.51 + 0.79 / - 0.41] 0.219 [5.56] 0.608 [15.45] 1.500 ± 0.250 [38.10 ± 6.35]
F 0.281 ± 0.016 [7.14 ± 0.41] 0.641 + 0.031 / - 0.016 [16.28 + 0.79 / - 0.41] 0.312 [7.92] 0.796 [20.22] 2.250 ± 0.250 [57.15 ± 6.35]
T 0.375 ± 0.016 [9.53 ± 0.41] 0.766 + 0.031 / - 0.016 [19.46 + 0.79 / - 0.41] 0.406 [10.31] 0.921 [23.40] 2.250 ± 0.250 [57.15 ± 6.35]
K (2) 0.375 ± 0.016 [9.53 ± 0.41] 1.062 + 0.031 / - 0.016 [26.97 + 0.79 / - 0.41] 0.406 [10.31] 1.217 [30.91] 2.250 ± 0.250 [57.15 ± 6.35]
RATINGS AND CASE CODES (Standard)
μF 6 V 8 V 10 V 15 V 20 V 25 V 30 V 35 V 50 V 60 V 75 V 100 V 125 V
1.7 C
2.5 C
3.0 C
3.5 C
3.6 C
4.0 C
4.5 C
4.7 C
5.0 C
6.8 C
7.0 C
8.0 C
8.2 C
9.0 F
10 C C F
11 F
13 F
14 F
15 C C F
18 T
20 C F
22 C C F F
25 C F T
27 C C
30 C T
33 C F
39 F
40 F T
43 T
47 C F
50 F T
56 C T K
60 T
0.025 [0.635] dia. (no. 22 AWG)
tinned solderable leads
D
0.250 [6.35]
max.
+-
L
109D
www.vishay.com Vishay
Revision: 03-Apr-2019 3Document Number: 40023
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
68 C F F T
70 F
82 T
86 K
100 FF / T T
110 K
120 F T
140 F K
150 T
160 K
170 T
180 F T
220 F T F
250 T
270 F T K
290 T T
300 K
330 T
350 K
390 T
430 T
540 K
560 T
750 K
850 K
1200 K
RATINGS AND CASE CODES (Extended)
μF 6 V 8 V 10 V 15 V 20 V 25 V 30 V 35 V 50 V 60 V 75 V 100 V 125 V
2.0 C
6.8 C
8.2 C
10 C
12 C
15 C
18 C
22 C C
27 C F
33 C C F
39 C F T
47 C C C F T
56 C C F T K
68 C C F T
82 C C F F K
86 K
100 C C F
110 T
120 C F F K
140 C T
150 C F
160 T
RATINGS AND CASE CODES (Standard)
μF 6 V 8 V 10 V 15 V 20 V 25 V 30 V 35 V 50 V 60 V 75 V 100 V 125 V
109D
www.vishay.com Vishay
Revision: 03-Apr-2019 4Document Number: 40023
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
180 C F F T
200 T
220 F F T T K
250 T
270 F F T K K
330 F F T K
350 T
390 F F T T
470 F F T K
510 T
540 T
560 F T K
680 F K
750 K
820 FT / K
1000 T K
1200 T / K
1500 T K
1800 K
2200 K
STANDARD RATINGS
CAPACITANCE
(μF)
CASE
CODE PART NUMBER (1)
MAX. ESR
AT +25 °C
120 Hz
()
MAX. IMP.
AT -55 °C
120 Hz
()
MAX. DCL
(μA) AT
MAX. CAPACITANCE
CHANGE (%) AT
MAX. RMS
RIPPLE
CURRENT
120 Hz
(mA)
+25 °C +85 °C
+125 °C -55 °C +85 °C +125 °C
6 VDC AT +85 °C; 7 VDC AT +125 °C
30 C 109D306X0006C0 4.2 100 1.0 2.0 -40 +10.5 +12 140
68 C 109D686X0006C0 4.0 60 1.0 2.0 -40 +14 +16 160
140 F 109D147X0006F0 2.0 40 1.0 3.0 -40 +14 +16 330
270 F 109D277X0006F0 4.0 25 1.0 7.0 -44 +17.5 +20 270
290 T 109D297X0006T0 2.0 24 2.0 7.0 -70 +20 +20 410
330 T 109D337X0006T0 2.1 20 2.0 7.9 -44 +14 +16 410
560 T 109D567X0006T0 3.0 25 2.0 13 -64 +17.5 +20 340
1200 K 109D128X0006K0 1.6 20 3.0 14 -80 +25 +25 530
8 VDC AT +85 °C; 5 VDC AT +125 °C
22 C 109D226X0008C0 6.0 115 1.0 2.0 -40 +10.5 +12 130
25 C 109D256X0008C0 4.2 100 1.0 2.0 -40 +10.5 +12 140
56 C 109D566X0008C0 4.0 59 1.0 2.0 -40 +14 +16 160
220 F 109D227X0008F0 4.0 30 1.0 7.0 -44 +17.5 +20 270
290 T 109D297X0008T0 2.0 24 2.0 9.5 -70 +20 +20 410
430 T 109D437X0008T0 3.2 25 2.0 14 -64 +17.5 +20 410
850 K 109D857X0008K0 1.0 22 4.0 16 -80 +25 +25 670
10 VDC AT +85 °C; 7 VDC AT +125 °C
20 C 109D206X0010C0 5.0 175 1.0 2.0 -32 +10.5 +12 140
47 C 109D476X0010C0 5.0 100 1.0 2.0 -36 +14 +16 160
100 F 109D107X0010F0 2.1 60 1.0 4.0 -36 +14 +16 270
180 F 109D187X0010F0 4.0 40 1.0 7.0 -36 +14 +16 270
250 T 109D257X0010T0 2.0 30 2.0 10 -40 +14 +16 410
390 T 109D397X0010T0 3.0 25 2.0 16 -64 +17.5 +20 340
750 K 109D757X0010T0 1.0 23 4.0 16 -80 +25 +25 670
Note
(1) Part numbers shown are for units with ± 20 % capacitance tolerance and uninsulated capacitors. For ± 10 % units, change the digit
following the letter “X” from “0” to “9”. For units with outer plastic-film insulation, substitute “2” for “0” at the end of the part number. For
RoHS-compliant add “E3”
RATINGS AND CASE CODES (Extended)
μF 6 V 8 V 10 V 15 V 20 V 25 V 30 V 35 V 50 V 60 V 75 V 100 V 125 V
109D
www.vishay.com Vishay
Revision: 03-Apr-2019 5Document Number: 40023
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
15 VDC AT +85 °C; 10 VDC AT +125 °C
15 C 109D156X0015C0 6.0 155 1.0 2.0 -24 +10.5 +12 130
33 C 109D336X0015C0 5.0 90 1.0 2.0 -28 +14 +16 160
70 F 109D706X0015F0 3.6 75 1.0 4.0 -28 +14 +16 270
120 F 109D127X0015F0 4.0 50 1.0 7.0 -28 +17.5 +20 270
270 T 109D277X0015T0 3.0 30 2.0 16 -56 +17.5 +20 340
540 K 109D547X0015K0 1.2 23 6.0 24 -80 +25 +25 610
20 VDC AT +85 °C; 13 VDC AT +125 °C
27 C 109D276X0020C0 5.0 100 1.0 2.0 -20 +11 +14 160
220 T 109D227X0020T0 4.0 3 2.0 16 -48 +13 +15 410
25 VDC AT +85 °C; 15 VDC AT +125 °C
10 C 109D106X0025C0 6.0 220 1.0 2.0 -16 +8 +9 130
22 C 109D226X0025C0 5.0 140 1.0 3.0 -20 +10.5 +12 160
50 F 109D506X0025F0 4.0 70 1.0 5.0 -28 +13 +15 270
100 F 109D107X0025F0 4.0 50 1.0 10 -28 +13 +15 270
100 T 109D107X0025T0 4.0 45 2.0 10 -48 +13 +15 410
180 T 109D187X0025T0 4.0 32 2.0 18 -48 +13 +15 340
220 F 109D227X0025F0 2.6 36 3.2 16 -60 +13 +16 300
350 K 109D357X0025K0 1.3 24 7.0 28 -70 +25 +25 580
30 VDC AT +85 °C; 20 VDC AT +125 °C
7.0 C 109D705X0030C0 8.0 275 1.0 2.0 -16 +8 +12 110
8.0 C 109D805X0030C0 7.5 275 1.0 2.0 -16 +8 +12 130
15 C 109D156X0030C0 8.0 175 1.0 2.0 -20 +10.5 +12 160
40 F 109D406X0030F0 4.0 65 1.0 5.0 -24 +10.5 +12 270
68 F 109D686X0030F0 6.0 60 1.0 8.0 -24 +13 +15 270
100 T 109D107X0030T0 6.0 40 2.0 12 -28 +10.5 +12 410
150 T 109D157X0030T0 4.1 35 2.0 18 -48 +13 +15 340
300 K 109D307X0030K0 1.6 25 8.0 32 -60 +25 +25 550
35 VDC AT +85 °C; 22 VDC AT +125 °C
68 F 109D686X0035F0 6.0 60 1.0 8 -24 +12 +15 270
120 T 109D127X0035T0 4.0 38 2.0 16 -30 +13 +15 410
270 K 109D277X0035K0 2.2 23 8.0 32 -45 +20 +25 500
50 VDC AT +85 °C; 30 VDC AT +125 °C
4.5 C 109D455X0050C0 9.0 400 1.0 2.0 -16 +5 +6 110
5.0 C 109D505X0050C0 9.0 400 1.0 2.0 -16 +5 +6 130
10 C 109D106X0050C0 8.0 250 1.0 2.0 -24 +8 +9 160
22 F 109D226X0050F0 7.0 95 1.0 4.0 -20 +10.5 +12 230
25 F 109D256X0050F0 6.0 95 1.0 5.0 -20 +10.5 +12 270
47 F 109D476X0050F0 6.0 70 1.0 9.0 -28 +13 +15 270
60 T 109D606X0050T0 3.0 45 2.0 12 -16 +10.5 +12 410
82 T 109D826X0050T0 4.0 45 2.0 16 -32 +13 +15 340
160 K 109D167X0050K0 2.2 27 8.0 32 -50 +25 +25 460
STANDARD RATINGS
CAPACITANCE
(μF)
CASE
CODE PART NUMBER (1)
MAX. ESR
AT +25 °C
120 Hz
()
MAX. IMP.
AT -55 °C
120 Hz
()
MAX. DCL
(μA) AT
MAX. CAPACITANCE
CHANGE (%) AT
MAX. RMS
RIPPLE
CURRENT
120 Hz
(mA)
+25 °C +85 °C
+125 °C -55 °C +85 °C +125 °C
Note
(1) Part numbers shown are for units with ± 20 % capacitance tolerance and uninsulated capacitors. For ± 10 % units, change the digit
following the letter “X” from “0” to “9”. For units with outer plastic-film insulation, substitute “2” for “0” at the end of the part number. For
RoHS-compliant add “E3”
109D
www.vishay.com Vishay
Revision: 03-Apr-2019 6Document Number: 40023
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
60 VDC AT +85 °C; 40 VDC AT +125 °C
4.0 C 109D405X0060C0 10.0 550 1.0 2.0 -16 +5 +6 110
8.2 C 109D825X0060C0 8.0 275 1.0 2.0 -24 +8 +9 140
20 F 109D206X0060F0 5.0 105 1.0 5.0 -16 +10.5 +12 270
39 F 109D396X0060F0 7.0 90 1.0 9.0 -28 +10.5 +12 230
50 T 109D506X0060T0 4.0 50 2.0 12 -16 +10.5 +12 410
68 T 109D686X0060T0 6.0 50 2.0 16 -32 +10.5 +12 340
140 K 109D147X0060K0 2.4 28 8.0 32 -40 +20 +20 430
75 VDC AT +85 °C; 50 VDC AT +125 °C
3.5 C 109D355X0075C0 10.0 650 1.0 2.0 -16 +5 +6 110
6.8 C 109D685X0075C0 8.0 300 1.0 2.0 -20 +8 +9 140
13 F 109D136X0075F0 6.0 160 1.0 4.0 -16 +8 +9 190
15 F 109D156X0075F0 6.5 150 1.0 5.0 -16 +8 +9 270
33 F 109D336X0075F0 7.0 90 1.0 10 -24 +10.5 +15 230
40 T 109D406X0075T0 5.0 60 2.0 12 -16 +10.5 +12 410
56 T 109D566X0075T0 6.0 60 2.0 17 -28 +10.5 +15 300
110 K 109D117X0075K0 3.1 29 9.0 36 -35 +20 +20 400
100 VDC AT +85 °C; 65 VDC AT +125 °C
2.5 C 109D255X0100C0 26.5 950 1.0 2.0 -16 +7 +8 100
3.0 C 109D305X0100C0 10.0 800 1.0 2.0 -16 +7 +8 110
4.7 C 109D475X0100C0 10.0 500 1.0 2.0 -16 +7 +8 130
10 F 109D106X0100F0 6.0 215 1.0 4.0 -16 +7 +8 190
11 F 109D116X0100F0 6.0 200 1.0 4.0 -16 +7 +8 230
22 F 109D226X0100F0 7.0 100 1.0 9.0 -16 +7 +8 230
30 T 109D306X0100T0 4.0 80 2.0 12 -16 +7 +8 340
43 T 109D436X0100T0 6.0 70 2.0 17 -20 +7 +8 300
86 K 109D866X0100K0 3.1 30 9.0 36 -25 +15 +15 400
125 VDC AT +85 °C; 85 VDC AT +125 °C
1.7 C 109D175X0125C0 54.6 1250 1.0 2.0 -16 +7 +8 100
3.6 C 109D365X0125C0 15.0 600 1.0 2.0 -16 +7 +8 110
9.0 F 109D905X0125F0 15.0 240 1.0 5.0 -16 +7 +8 210
14 F 109D146X0125F0 12.0 167 1.0 7.0 -16 +7 +8 190
18 T 109D186X0125T0 11.0 129 2.0 9.0 -16 +7 +8 340
25 T 109D256X0125T0 10.0 93 2.0 13 -16 +7 +8 260
56 K 109D566X0125K0 4.1 3.2 10 40 -25 +15 +15 400
STANDARD RATINGS
CAPACITANCE
(μF)
CASE
CODE PART NUMBER (1)
MAX. ESR
AT +25 °C
120 Hz
()
MAX. IMP.
AT -55 °C
120 Hz
()
MAX. DCL
(μA) AT
MAX. CAPACITANCE
CHANGE (%) AT
MAX. RMS
RIPPLE
CURRENT
120 Hz
(mA)
+25 °C +85 °C
+125 °C -55 °C +85 °C +125 °C
Note
(1) Part numbers shown are for units with ± 20 % capacitance tolerance and uninsulated capacitors. For ± 10 % units, change the digit
following the letter “X” from “0” to “9”. For units with outer plastic-film insulation, substitute “2” for “0” at the end of the part number. For
RoHS-compliant add “E3”
109D
www.vishay.com Vishay
Revision: 03-Apr-2019 7Document Number: 40023
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
EXTENDED RATINGS
CAPACITANCE
(μF)
CASE
CODE PART NUMBER (1)
MAX. ESR
AT +25 °C
120 Hz
()
MAX. IMP.
AT -55 °C
120 Hz
()
MAX. DCL
(μA) AT
MAX. CAPACITANCE
CHANGE (%) AT
MAX. RMS
RIPPLE
CURRENT
120 Hz
(mA)
+25 °C +85 °C
+125 °C -55 °C +85 °C +125 °C
6 VDC AT +85 °C; 7 VDC AT +125 °C
140 C 109D147X0006C2 3.0 54 2.0 9.0 -45 +13 +16 160
820 F 109D827X0006F0 2.5 18 3.0 14 -88 +16 +20 300
1500 T 109D158X0006T0 1.5 18 5.0 20 -90 +20 +25 480
2200 K 109D228X0006K0 1.0 13 6.0 24 -90 +25 +30 670
8 VDC AT +85 °C; 5 VDC AT +125 °C
180 C 109D187X0008C0 3.0 45 2.0 9.0 -60 +13 +16 180
470 F 109D477X0008F0 2.5 25 3.0 14 -75 +16 +20 300
680 F 109D687X0008F0 2.5 22 3.0 14 -90 +16 +20 300
1800 K 109D188X0008K0 1.0 14 7.0 25 -60 +20 +30 670
10 VDC AT +85 °C; 7 VDC AT +125 °C
100 C 109D107X0010C0 3.0 60 2.0 9.0 -50 +13 +16 160
120 C 109D127X0010C0 4.0 60 2.0 9.0 -45 +13 +16 160
150 C 109D477X0010F0 3.0 54 2.0 9.0 -55 +13 +16 180
390 F 109D397X0010F0 2.5 30 3.0 16 -70 +16 +20 300
470 F 109D477X0010F0 2.5 30 3.0 16 -65 +16 +20 300
560 F 109D567X0010F0 2.5 27 3.0 16 -77 +16 +20 300
1000 T 109D108X0010T0 1.5 20 5.0 20 -75 +20 +25 480
1200 K 109D128X0010K0 1.0 18 7.0 25 -75 +30 +30 670
1200 T 109D128X0010T0 1.5 18 5.0 20 -88 +20 +25 480
1500 K 109D158X0010K0 1.0 15 7.0 25 -88 +25 +30 670
15 VDC AT +85 °C; 10 VDC AT +125 °C
68 C 109D686X0015C0 4.0 80 2.0 9.0 -40 +13 +16 140
82 C 109D826X0015C0 4.0 80 2.0 9.0 -38 +13 +16 160
100 C 109D107X0015C0 4.0 72 2.0 9.0 -44 +13 +16 160
270 F 109D277X0015F0 2.5 35 3.0 16 -60 +16 +20 300
330 F 109D337X0015F0 2.5 35 3.0 16 -60 +16 +20 300
390 F 109D397X0015F0 2.5 31 3.0 16 -66 +16 +20 300
510 T 109D517X0015T0 1.8 25 6.0 24 -65 +20 +25 340
540 T 109D547X0015T0 1.8 22 6.0 24 -77 +20 +25 440
820 T 109D827X0015T0 1.8 22 6.0 24 -77 +20 +25 440
820 K 109D827X0015K0 1.2 20 8.0 32 -70 +30 +30 610
1000 K 109D108X0015K0 1.2 17 8.0 32 -77 +25 +30 610
20 VDC AT +85 °C; 13 VDC AT +125 °C
56 C 109D566X0020C0 4.3 90 2.0 9.0 -38 +13 +16 140
82 C 109D826X0020C0 4.3 81 2.0 9.0 -43 +13 +16 160
220 F 109D227X0020F0 2.7 35 3.0 16 -60 +16 +20 300
330 F 109D337X0020F0 2.7 31 3.0 16 -66 +16 +20 300
25 VDC AT +85 °C; 15 VDC AT +125 °C
47 C 109D476X0025C0 4.3 100 2.0 9.0 -35 +12 +15 140
68 C 109D686X0025C0 4.3 90 2.0 9.0 -40 +12 +15 160
180 F 109D187X0025F0 2.7 37 3.0 16 -55 +13 +16 300
270 F 109D277X0025F0 2.7 33 3.0 16 -62 +13 +16 300
350 T 109D357X0025T0 1.8 27 7.0 28 -60 +20 +25 440
560 T 109D567X0025T0 1.8 24 7.0 28 -72 +20 +25 440
680 K 109D687X0025K0 1.2 19 8.0 32 -72 +25 +30 610
750 K 109D757X0025K2 1.0 18 8.0 29 -60 +25 +25 610
Note
(1) Part numbers shown are for units with ± 20 % capacitance tolerance and uninsulated capacitors. For ± 10 % units, change the digit
following the letter “X” from “0” to “9”. For units with outer plastic-film insulation, substitute “2” for “0” at the end of the part number. For
RoHS-compliant add “E3”
109D
www.vishay.com Vishay
Revision: 03-Apr-2019 8Document Number: 40023
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
30 VDC AT +85 °C; 20 VDC AT +125 °C
39 C 109D396X0030C0 5.2 110 2.0 9.0 -28 +10 +12 140
47 C 109D476X0030C0 5.2 100 2.0 9.0 -30 +10 +12 140
56 C 109D566X0030C0 5.2 100 2.0 9.0 -38 +12 +15 140
150 F 109D157X0030F0 2.5 40 3.0 9.0 -40 +12 +15 300
180 F 109D187X0030F0 2.5 40 3.0 16 -45 +13 +16 300
220 F 109D227X0030F0 2.5 36 3.0 16 -60 +13 +16 300
330 T 109D337X0030T0 1.8 28 8.0 16 -45 +20 +25 440
390 T 109D397X0030T0 1.8 28 8.0 32 -50 +20 +25 440
470 T 109D477X0030T0 1.8 25 8.0 32 -65 +20 +25 550
560 K 109D567X0030K0 1.3 20 9.0 32 -65 +25 +30 590
35 VDC AT +85 °C; 22 VDC AT +125 °C
33 C 109D336X0035C0 5.2 130 2.0 9.0 -30 +10 +12 140
47 C 109D476X0035C0 5.2 115 2.0 9.0 -35 +10 +12 140
120 F 109D127X0035F0 2.5 45 3.0 16 -45 +13 +16 300
220 T 109D227X0035T0 1.8 30 8.0 32 -45 +20 +25 440
390 T 109D337X0035T0 1.8 27 8.0 32 -58 +20 +25 440
470 K 109D477X0035T0 1.3 21 9.0 36 -58 +25 +30 590
50 VDC AT +85 °C; 30 VDC AT +125 °C
22 C 109D226X0050C0 5.0 150 2.0 9.0 -24 +10 +12 140
33 C 109D336X0050C0 5.0 135 2.0 9.0 -29 +10 +12 140
82 F 109D826X0050F0 2.5 55 4.0 24 -35 +10 +15 300
120 F 109D127X0050F0 2.5 49 4.0 24 -42 +12 +15 300
160 T 109D167X0050T0 1.8 32 6.0 32 -35 +20 +25 420
250 T 109D257X0050T0 1.8 29 8.0 32 -40 +20 +25 440
270 T 109D277X0050T0 1.8 29 8.0 32 -46 +20 +25 440
330 K 109D337X0050K0 1.5 22 9.0 36 -46 +25 +30 550
60 VDC AT +85 °C; 40 VDC AT +125 °C
18 C 109D186X0060C0 5.0 160 3.0 12 -20 +10 +12 140
27 C 109D276X0060C0 5.0 144 3.0 12 -24 +10 +12 140
68 F 109D686X0060F0 3.0 60 3.0 20 -30 +12 +15 270
100 F 109D107X0060F0 2.5 54 4.0 20 -36 +12 +15 300
140 T 109D147X0060T0 2.0 32 8.0 32 -30 +16 +20 420
220 T 109D227X0060T0 1.8 29 8.0 32 -40 +16 +20 440
270 K 109D277X0060K0 1.5 23 9.0 36 -45 +20 +25 550
75 VDC AT +85 °C; 50 VDC AT +125 °C
12 C 109D126X0075C0 5.0 175 2.0 12 -12 +8 +10 140
15 C 109D156X0075C0 5.0 160 2.0 12 -14 +10 +12 140
22 C 109D226X0075C0 5.0 157 3.0 12 -19 +10 +12 140
47 F 109D476X0075F0 3.0 75 4.0 24 -18 +10 +12 270
56 F 109D566X0075F0 3.0 70 4.0 24 -20 +12 +15 270
82 F 109D826X0075F0 2.5 63 4.0 24 -30 +12 +15 300
110 T 109D117X0075T0 2.0 33 9.0 36 -25 +16 +20 420
180 T 109D187X0075T0 1.8 30 9.0 36 -35 +16 +20 440
200 T 109D207X0075T0 1.8 29 8.0 32 -40 +20 +25 440
220 K 109D227X0075K0 2.2 24 10 40 -40 +20 +25 450
270 K 109D277X0075K2 1.3 24 10 40 -40 +20 +25 450
EXTENDED RATINGS
CAPACITANCE
(μF)
CASE
CODE PART NUMBER (1)
MAX. ESR
AT +25 °C
120 Hz
()
MAX. IMP.
AT -55 °C
120 Hz
()
MAX. DCL
(μA) AT
MAX. CAPACITANCE
CHANGE (%) AT
MAX. RMS
RIPPLE
CURRENT
120 Hz
(mA)
+25 °C +85 °C
+125 °C -55 °C +85 °C +125 °C
Note
(1) Part numbers shown are for units with ± 20 % capacitance tolerance and uninsulated capacitors. For ± 10 % units, change the digit
following the letter “X” from “0” to “9”. For units with outer plastic-film insulation, substitute “2” for “0” at the end of the part number. For
RoHS-compliant add “E3”
109D
www.vishay.com Vishay
Revision: 03-Apr-2019 9Document Number: 40023
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
100 VDC AT +85 °C; 65 VDC AT +125 °C
2.0 C 109D205X0100C0 14.0 870 3.0 12 -20 +12 +12 100
8.2 C 109D825X0100C0 6.0 250 3.0 12 -12 +12 +12 130
10 C 109D106X0100C0 6.0 200 3.0 12 -17 +10 +12 130
33 F 109D336X0100F0 3.5 85 4.0 24 -18 +15 +15 250
39 F 109D396X0100F0 3.5 80 5.0 24 -20 +12 +15 250
56 T 109D566X0100T0 2.2 45 9.0 36 -20 +15 +15 400
68 T 109D686X0100T0 2.2 40 10 40 -30 +14 +16 400
86 K 109D866X0100K0 3.2 30 10 40 -25 +15 +15 370
120 K 109D127X0100K0 2.8 30 12 48 -35 +15 +17 440
125 VDC AT +85 °C; 85 VDC AT +125 °C
6.8 C 109D685X0125C0 11.7 300 3.0 12 -14 +10 +12 130
27 F 109D276X0125F0 3.5 90 5.0 24 -18 +12 +15 250
39 T 109D396X0125T0 2.2 60 10 40 -16 +14 +16 400
47 T 109D476X0125T0 2.2 50 10 40 -26 +14 +16 400
56 K 109D566X0125K0 4.1 32 10 40 -25 +15 +15 330
82 K 109D826X0125K0 2.8 32 12 48 -30 +15 +17 440
EXTENDED RATINGS
CAPACITANCE
(μF)
CASE
CODE PART NUMBER (1)
MAX. ESR
AT +25 °C
120 Hz
()
MAX. IMP.
AT -55 °C
120 Hz
()
MAX. DCL
(μA) AT
MAX. CAPACITANCE
CHANGE (%) AT
MAX. RMS
RIPPLE
CURRENT
120 Hz
(mA)
+25 °C +85 °C
+125 °C -55 °C +85 °C +125 °C
Note
(1) Part numbers shown are for units with ± 20 % capacitance tolerance and uninsulated capacitors. For ± 10 % units, change the digit
following the letter “X” from “0” to “9”. For units with outer plastic-film insulation, substitute “2” for “0” at the end of the part number. For
RoHS-compliant add “E3”
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 01-Jan-2019 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2019 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
