1 AMP SILICON RECTIFIERS 1N4001S THRU 1N4007S TECHNICAL SPECIFICATION FEATURES VOLTAGE 50 to 1000 Volts 0.6mm diameter leads Low cost construction utilizing void - free moulded plastic technique CURRENT 1.0 Amp Plastic package has Underwriters Laboratories Flammability Classification 94V-0 Diffused junction DIMENSIONS - millimeters (inches) High surge current capability Low leakage DO-41 (mod.) High temperature soldering capability : 250C/10 seconds/9.5mm (.375in.) lead length at 2.3kg (5lb) tension Easily cleaned with Freon, Alcohol, Chlorothene and other similar solvents 25.4 (1.0) min. 2.7 (.107) 2.0 (.080) MECHANICAL DATA 5.2 (.205) 4.1 (.160) Case : JEDEC DO-41, moulded plastic with modified terminal diameter. Terminals : Plated axial leads, solderable per MIL-STD-202, Method 208. Polarity : Colour band denotes cathode end. Mounting Position : Any Weight : 0.3 grams (0.012 ounce) Cathode Band 25.4 (1.0) min. .64 (.025) .53 (.021) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Symbols 1N4001S 1N4002S 1N4003S 1N4004S 1N4005S 1N4006S 1N4007S Units Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 35 70 140 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS Maximum DC Blocking Voltage VDC 280 420 400 600 560 700 V 800 1000 V Maximum Average Forward Rectified Current 9.5mm (.375in.) Lead Length at TA = 75C IF(AV) 1.0 A Peak Forward Surge Current, 8.3 ms single half sine - wave superimposed on rated load IFSM 30 A Maximum Instantaneous Forward Voltage at 1.0A VF 1.1 V A A TA = 25C T A= 100C Maximum Full load Reverse Current Full Cycle Average, 9.5mm (.375in.) Lead Length at TL = 75C IR 5.0 50 IR(AV) 30 A Typical Junction Capacitance (see Note 1) CJ 30 pF Typical Thermal Resistance (see Note 2) RTHja 50 C/W Maximum Reverse Current at Rated DC Blocking Voltage Operating Temperature Range TJ - 50 to + 175 C Storage Temperature Range TSTG - 50 to + 175 C Notes : 1. 2. Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts Thermal Resistance from Junction to Ambient Reformatted by Anglia 9907 1N4001S THRU 1N4007S RATING AND CHARACTERISTIC CURVES FIG. 1 - FORWARD CURRENT DERATING CURVE FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 30 0.8 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 1.0 L 0.6 0.4 5mm x 5mm Cu Leafs 9.5mm Lead Length 0.2 25 20 15 TA = 75C 8.3ms single half sine-wave (JEDEC) method 10 0 5 0 25 50 75 100 125 150 175 200 1 2 5 20 100 50 NUMBER OF CYCLES AT 60Hz AMBIENT TEMPERATURE, C FIG. 4 - TYPICAL JUNCTION CAPACITANCE FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 100 100 50 CAPACITANCE, pF 30 INSTANTANEOUS FORWARD CURRENT, AMPERES 10 10 3.0 1.0 20 TJ = 25C f = 1MHz VSIG = 50mVp-p 10 5 2 0.3 TJ = 25C Pulse width = 300s 2% duty cycle 1 .1 0.1 .2 1 .5 2 5 10 20 50 100 REVERSE VOLTAGE, VOLTS .03 .01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 FIG. 5 - TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS FORWARD VOLTAGE, VOLTS TAPING AND REELING SPECIFICATION 5.0 0.5 1.2 max. 5max. 16.5 0.4 0.3 max. 79.0 1.0 L1 52.4 1.5 35.7 0.3 L2 0.3 max. 330.0 6.0 0.4 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES 10 3.0 TJ = 100C 1.0 0.3 0.1 TJ = 25C .03 .01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, % Dimensions - millimeters NOTES : Each component lead sandwiched between tapes for 3.2mm minimum Cumulative pitch tolerance 2.0mm/10 pitch Reformatted by Anglia 9907