HT75XX-1 100mA Low Power LDO Features * Low power consumption * High output current : 100mA * Low voltage drop * Output voltage accuracy: tolerance 3% * Low temperature coefficient * TO92, SOT89 and SOT23-5 package * High input voltage (up to 24V) Applications * Battery-powered equipment * Audio/Video equipment * Communication equipment General Description The HT75XX-1 series is a set of three-terminal high current low voltage regulator implemented in CMOS technology. They can deliver 100mA output current and allow an input voltage as high as 24V. They are available with several fixed output voltages ranging from 2.1V to 12.0V. CMOS technology ensures low voltage drop and low quiescent current. Although designed primarily as fixed voltage regulators, these devices can be used with external components to obtain variable voltages and currents. Selection Table Note: Part No. Output Voltage HT7521-1 2.1V HT7523-1 2.3V HT7525-1 2.5V HT7527-1 2.7V HT7530-1 3.0V HT7533-1 3.3V HT7536-1 3.6V HT7540-1 4.0V HT7544-1 4.4V HT7550-1 5.0V HT7560-1 6.0V HT7570-1 7.0V HT7580-1 8.0V HT7590-1 9.0V HT75A0-1 10.0V HT75C0-1 12.0V Package Marking TO92 SOT89 SOT23-5 75XX-1 (for TO92) 75XX-1 (for SOT89) 5XX1 (for SOT23-5) XX stands for output voltages. For lead free devices, TO92 package will add a # mark at the end of the date code, whereas SOT89 & SOT23-5 packages will add a # mark at the end of the marking. Rev. 2.00 1 March 21, 2012 HT75XX-1 Block Diagram V IN V O U T V re f G N D Pin Assignment T O 9 2 S O T 8 9 7 5 X X -1 S O T 2 3 -5 N C F r o n t V ie w 7 5 X X -1 G N D V IN V O U T G N D V IN G N D V IN N C 5 X X 1 V O U T T o p V ie w G N D V IN V O U T G N D V IN V O U T S id e V ie w V O U T Absolute Maximum Ratings Supply Voltage .........................................-0.3V to 26V Storage Temperature ...........................-50C to 125C Operating Temperature ..........................-40C to 85C Note: These are stress ratings only. Stresses exceeding the range specified under Absolute Maximum Ratings may cause substantial damage to the device. Functional operation of this device at other conditions beyond those listed in the specification is not implied and prolonged exposure to extreme conditions may affect device reliability. Thermal Information Symbol qJA PD Parameter Thermal Resistance (Junction to Ambient) (Assume no ambient airflow, no heat sink) Power Dissipation Package Max. Unit SOT23-5 500 C/W SOT89 200 C/W TO92 200 C/W SOT23-5 0.20 W SOT89 0.50 W TO92 0.50 W Note: PD is measured at Ta= 25C Rev. 2.00 2 March 21, 2012 HT75XX-1 Electrical Characteristics HT7521-1, +2.1V Output Type Symbol Parameter Ta=25C Test Conditions VOUT Output Voltage 4.1V IOUT Output Current 4.1V DVOUT Load Regulation 4.1V VDIF Voltage Drop (Note) ISS Current Consumption D V D V O U T V IN O U T VIN D V O D T U T Note: 3/4 4.1V Line Regulation 3/4 Input Voltage 3/4 Temperature Coefficient a Min. Typ. Max. Unit 2.037 2.1 2.163 V 60 100 3/4 mA 1mAIOUT50mA 3/4 60 150 mV IOUT=1mA, DVOUT=2% 3/4 100 3/4 mV No load 3/4 2.5 5.0 mA 3.1VVIN24V IOUT=1mA 3/4 0.2 3/4 %/V 3/4 3/4 24 V 3/4 0.37 3/4 mV/C VIN 4.1V Conditions IOUT=10mA 3/4 3/4 IOUT=10mA -40C<Ta<85C Dropout voltage is defined as the input voltage minus the output voltage that produces a 2% change in the output voltage from the value at VIN = VOUT+2V with a fixed load. HT7523-1, +2.3V Output Type Symbol Parameter Ta=25C Test Conditions VOUT Output Voltage 4.3V IOUT Output Current 4.3V DVOUT Load Regulation 4.3V VDIF Voltage Drop (Note) ISS Current Consumption D V D V O U T V IN VIN D V O D T Note: U T O U T 3/4 4.3V Line Regulation 3/4 Input Voltage 3/4 Temperature Coefficient a Min. Typ. Max. Unit 2.231 2.3 2.369 V 60 100 3/4 mA 1mAIOUT50mA 3/4 60 150 mV IOUT=1mA, DVOUT=2% 3/4 100 3/4 mV No load 3/4 2.5 5.0 mA 3.3VVIN24V IOUT=1mA 3/4 0.2 3/4 %/V 3/4 3/4 24 V 3/4 0.39 3/4 mV/C VIN 4.3V Conditions IOUT=10mA 3/4 3/4 IOUT=10mA -40C<Ta<85C Dropout voltage is defined as the input voltage minus the output voltage that produces a 2% change in the output voltage from the value at VIN = VOUT+2V with a fixed load. Rev. 2.00 3 March 21, 2012 HT75XX-1 HT7525-1, +2.5V Output Type Symbol Parameter Ta=25C Test Conditions VOUT Output Voltage 4.5V IOUT Output Current 4.5V DVOUT Load Regulation 4.5V VDIF Voltage Drop (Note) ISS Current Consumption D V D V O U T V IN O U T VIN D V O D T U T Note: 3/4 4.5V Line Regulation 3/4 Input Voltage 3/4 Temperature Coefficient a Typ. Max. 2.425 2.5 2.575 V 60 100 3/4 mA 1mAIOUT50mA 3/4 60 150 mV IOUT=1mA, DVOUT=2% 3/4 100 3/4 mV No load 3/4 2.5 5.0 mA 3.5VVIN24V IOUT=1mA 3/4 0.2 3/4 %/V 3/4 3/4 24 V 3/4 0.41 3/4 mV/C VIN 4.5V Conditions IOUT=10mA 3/4 3/4 IOUT=10mA -40C<Ta<85C Min. Dropout voltage is defined as the input voltage minus the output voltage that produces a 2% change in the output voltage from the value at VIN = VOUT+2V with a fixed load. HT7527-1, +2.7V Output Type Symbol Parameter Ta=25C Test Conditions Output Voltage 4.7V IOUT Output Current 4.7V DVOUT Load Regulation 4.7V VDIF Voltage Drop (Note) ISS Current Consumption D V O U T V IN VIN D V O D T Note: U T O U T 3/4 4.7V Line Regulation 3/4 Input Voltage 3/4 Temperature Coefficient a Min. Typ. Max. Unit 2.619 2.7 2.781 V 60 100 3/4 mA 1mAIOUT50mA 3/4 60 150 mV IOUT=1mA, DVOUT=2% 3/4 100 3/4 mV No load 3/4 2.5 5.0 mA 3.7VVIN24V IOUT=1mA 3/4 0.2 3/4 %/V 3/4 3/4 24 V 3/4 0.43 3/4 mV/C VIN VOUT D V Unit 4.7V Conditions IOUT=10mA 3/4 3/4 IOUT=10mA -40C<Ta<85C Dropout voltage is defined as the input voltage minus the output voltage that produces a 2% change in the output voltage from the value at VIN = VOUT+2V with a fixed load. Rev. 2.00 4 March 21, 2012 HT75XX-1 HT7530-1, +3.0V Output Type Symbol Parameter Ta=25C Test Conditions VIN VOUT Output Voltage 5.0V IOUT Output Current 5.0V DVOUT Load Regulation 5.0V VDIF Voltage Drop (Note) ISS Current Consumption D V D V O U T V IN O U T VIN D V O D T U T Note: 5.0V Line Regulation 3/4 Input Voltage 3/4 Temperature Coefficient a 3/4 5.0V Conditions IOUT=10mA 3/4 Min. Typ. Max. 2.91 3.0 3.09 V 60 100 3/4 mA 60 150 mV 1mAIOUT50mA IOUT=1mA, DVOUT=2% 3/4 100 3/4 mV No load 3/4 2.5 5.0 mA 4.0VVIN24V IOUT=1mA 3/4 0.2 3/4 %/V 3/4 3/4 24 V 3/4 0.45 3/4 mV/C 3/4 IOUT=10mA -40C<Ta<85C Dropout voltage is defined as the input voltage minus the output voltage that produces a 2% change in the output voltage from the value at VIN = VOUT+2V with a fixed load. HT7533-1, +3.3V Output Type Symbol Parameter Ta=25C Test Conditions Output Voltage 5.5V IOUT Output Current 5.5V DVOUT Load Regulation 5.5V VDIF Voltage Drop (Note) ISS Current Consumption D V O U T V IN VIN D V O D T Note: U T O U T 3/4 5.5V Line Regulation 3/4 Input Voltage 3/4 Temperature Coefficient a Min. Typ. Max. Unit 3.201 3.3 3.399 V 60 100 3/4 mA 1mAIOUT50mA 3/4 60 150 mV IOUT=1mA, DVOUT=2% 3/4 100 3/4 mV No load 3/4 2.5 5.0 mA 4.5VVIN24V IOUT=1mA 3/4 0.2 3/4 %/V 3/4 3/4 24 V 3/4 0.5 3/4 mV/C VIN VOUT D V Unit 5.5V Conditions IOUT=10mA 3/4 3/4 IOUT=10mA -40C<Ta<85C Dropout voltage is defined as the input voltage minus the output voltage that produces a 2% change in the output voltage from the value at VIN = VOUT+2V with a fixed load. Rev. 2.00 5 March 21, 2012 HT75XX-1 HT7536-1, +3.6V Output Type Symbol Parameter Ta=25C Test Conditions VOUT Output Voltage 5.6V IOUT Output Current 5.6V DVOUT Load Regulation 5.6V VDIF Voltage Drop (Note) ISS Current Consumption D V D V O U T V IN O U T VIN D V O D T U T Note: 3/4 5.6V Line Regulation 3/4 Input Voltage 3/4 Temperature Coefficient a Typ. Max. 3.492 3.6 3.708 V 60 100 3/4 mA 1mAIOUT50mA 3/4 60 150 mV IOUT=1mA, DVOUT=2% 3/4 100 3/4 mV No load 3/4 2.5 5.0 mA 4.6VVIN24V IOUT=1mA 3/4 0.2 3/4 %/V 3/4 3/4 24 V 3/4 0.6 3/4 mV/C VIN 5.6V Conditions IOUT=10mA 3/4 3/4 IOUT=10mA -40C<Ta<85C Min. Dropout voltage is defined as the input voltage minus the output voltage that produces a 2% change in the output voltage from the value at VIN = VOUT+2V with a fixed load. HT7540-1, +4.0V Output Type Symbol Parameter Ta=25C Test Conditions Output Voltage 6.0V IOUT Output Current 6.0V DVOUT Load Regulation 6.0V VDIF Voltage Drop (Note) ISS Current Consumption D V O U T V IN VIN D V O D T Note: U T O U T 3/4 6.0V Line Regulation 3/4 Input Voltage 3/4 Temperature Coefficient a Min. Typ. Max. Unit 3.88 4.0 4.12 V 60 100 3/4 mA 1mAIOUT50mA 3/4 60 150 mV IOUT=1mA, DVOUT=2% 3/4 100 3/4 mV No load 3/4 2.5 5.0 mA 5.0VVIN24V IOUT=1mA 3/4 0.2 3/4 %/V 3/4 3/4 24 V 3/4 0.7 3/4 mV/C VIN VOUT D V Unit 6.0V Conditions IOUT=10mA 3/4 3/4 IOUT=10mA -40C<Ta<85C Dropout voltage is defined as the input voltage minus the output voltage that produces a 2% change in the output voltage from the value at VIN = VOUT+2V with a fixed load. Rev. 2.00 6 March 21, 2012 HT75XX-1 HT7544-1, +4.4V Output Type Symbol Parameter Ta=25C Test Conditions VOUT Output Voltage 6.4V IOUT Output Current 6.4V DVOUT Load Regulation 6.4V VDIF Voltage Drop (Note) ISS Current Consumption D V D V O U T V IN O U T VIN D V O D T U T Note: 3/4 6.4V Line Regulation 3/4 Input Voltage 3/4 Temperature Coefficient a Typ. Max. 4.268 4.4 4.532 V 60 100 3/4 mA 1mAIOUT50mA 3/4 60 150 mV IOUT=1mA, DVOUT=2% 3/4 100 3/4 mV No load 3/4 2.5 5.0 mA 5.4VVIN24V IOUT=1mA 3/4 0.2 3/4 %/V 3/4 3/4 24 V 3/4 0.7 3/4 mV/C VIN 6.4V Conditions IOUT=10mA 3/4 3/4 IOUT=10mA -40C<Ta<85C Min. Dropout voltage is defined as the input voltage minus the output voltage that produces a 2% change in the output voltage from the value at VIN = VOUT+2V with a fixed load. HT7550-1, +5.0V Output Type Symbol Parameter Ta=25C Test Conditions Output Voltage 7.0V IOUT Output Current 7.0V DVOUT Load Regulation 7.0V VDIF Voltage Drop (Note) ISS Current Consumption D V O U T V IN VIN D V O D T Note: U T O U T 3/4 7.0V Line Regulation 3/4 Input Voltage 3/4 Temperature Coefficient a Min. Typ. Max. Unit 4.85 5.0 5.15 V 100 150 3/4 mA 1mAIOUT70mA 3/4 60 150 mV IOUT=1mA, DVOUT=2% 3/4 100 3/4 mV No load 3/4 2.5 5.0 mA 6.0VVIN24V IOUT=1mA 3/4 0.2 3/4 %/V 3/4 3/4 24 V 3/4 0.75 3/4 mV/C VIN VOUT D V Unit 7.0V Conditions IOUT=10mA 3/4 3/4 IOUT=10mA -40C<Ta<85C Dropout voltage is defined as the input voltage minus the output voltage that produces a 2% change in the output voltage from the value at VIN = VOUT+2V with a fixed load. Rev. 2.00 7 March 21, 2012 HT75XX-1 HT7560-1, +6.0V Output Type Symbol Parameter Ta=25C Test Conditions VOUT Output Voltage 8.0V IOUT Output Current 8.0V DVOUT Load Regulation 8.0V VDIF Voltage Drop (Note) ISS Current Consumption D V D V O U T V IN O U T VIN D V O D T U T Note: 3/4 8.0V Line Regulation 3/4 Input Voltage 3/4 Temperature Coefficient a Min. Typ. Max. 5.82 6.0 6.18 V 150 3/4 3/4 mA 1mAIOUT70mA 3/4 60 150 mV IOUT=1mA, DVOUT=2% 3/4 100 3/4 mV No load 3/4 2.5 5.0 mA 7.0VVIN24V IOUT=1mA 3/4 0.2 3/4 %/V 3/4 3/4 24 V 3/4 0.85 3/4 mV/C VIN 8.0V Conditions IOUT=10mA 3/4 3/4 IOUT=10mA -40C<Ta<85C Dropout voltage is defined as the input voltage minus the output voltage that produces a 2% change in the output voltage from the value at VIN = VOUT+2V with a fixed load. HT7570-1, +7.0V Output Type Symbol Parameter Ta=25C Test Conditions Output Voltage 9.0V IOUT Output Current 9.0V DVOUT Load Regulation 9.0V VDIF Voltage Drop (Note) ISS Current Consumption D V O U T V IN VIN D V O D T Note: U T O U T 3/4 9.0V Line Regulation 3/4 Input Voltage 3/4 Temperature Coefficient a Min. Typ. Max. Unit 6.79 7.0 7.21 V 150 3/4 3/4 mA 1mAIOUT70mA 3/4 60 150 mV IOUT=1mA, DVOUT=2% 3/4 100 3/4 mV No load 3/4 2.5 5.0 mA 8.0VVIN24V IOUT=1mA 3/4 0.2 3/4 %/V 3/4 3/4 24 V 3/4 0.95 3/4 mV/C VIN VOUT D V Unit 9.0V Conditions IOUT=10mA 3/4 3/4 IOUT=10mA -40C<Ta<85C Dropout voltage is defined as the input voltage minus the output voltage that produces a 2% change in the output voltage from the value at VIN = VOUT+2V with a fixed load. Rev. 2.00 8 March 21, 2012 HT75XX-1 HT7580-1, +8.0V Output Type Symbol Parameter Ta=25C Test Conditions VOUT Output Voltage 10V IOUT Output Current 10V DVOUT Load Regulation 10V VDIF Voltage Drop (Note) ISS Current Consumption D V D V O U T V IN O U T VIN D V O D T U T Note: 3/4 10V Line Regulation 3/4 Input Voltage 3/4 Temperature Coefficient a Min. Typ. Max. 7.76 8.0 8.24 V 150 3/4 3/4 mA 1mAIOUT70mA 3/4 60 150 mV IOUT=1mA, DVOUT=2% 3/4 100 3/4 mV No load 3/4 2.5 5.0 mA 9.0VVIN24V IOUT=1mA 3/4 0.2 3/4 %/V 3/4 3/4 24 V 3/4 1.10 3/4 mV/C VIN 10V Conditions IOUT=10mA 3/4 3/4 IOUT=10mA -40C<Ta<85C Dropout voltage is defined as the input voltage minus the output voltage that produces a 2% change in the output voltage from the value at VIN = VOUT+2V with a fixed load. HT7590-1, +9.0V Output Type Symbol Parameter Ta=25C Test Conditions Output Voltage 11V IOUT Output Current 11V DVOUT Load Regulation 11V VDIF Voltage Drop (Note) ISS Current Consumption D V O U T V IN VIN D V O D T Note: U T O U T 3/4 11V Line Regulation 3/4 Input Voltage 3/4 Temperature Coefficient a Min. Typ. Max. Unit 8.73 9.0 9.27 V 150 3/4 3/4 mA 1mAIOUT70mA 3/4 60 150 mV IOUT=1mA, DVOUT=2% 3/4 100 3/4 mV No load 3/4 2.5 5.0 mA 10VVIN24V IOUT=1mA 3/4 0.2 3/4 %/V 3/4 3/4 24 V 3/4 1.15 3/4 mV/C VIN VOUT D V Unit 11V Conditions IOUT=10mA 3/4 3/4 IOUT=10mA -40C<Ta<85C Dropout voltage is defined as the input voltage minus the output voltage that produces a 2% change in the output voltage from the value at VIN = VOUT+2V with a fixed load. Rev. 2.00 9 March 21, 2012 HT75XX-1 HT75A0-1, +10.0V Output Type Symbol Parameter Ta=25C Test Conditions VIN VOUT Output Voltage 12V IOUT Output Current 12V DVOUT Load Regulation 12V VDIF Voltage Drop (Note) ISS Current Consumption D V D V O U T V IN O U T VIN D V O D T U T Note: 12V Line Regulation 3/4 Input Voltage 3/4 Temperature Coefficient a 3/4 12V Conditions IOUT=10mA Min. Typ. Max. 9.7 10.0 10.3 V 150 3/4 3/4 mA 1mAIOUT70mA 3/4 60 150 mV IOUT=1mA, DVOUT=2% 3/4 100 3/4 mV No load 3/4 2.5 5.0 mA 11VVIN24V IOUT=1mA 3/4 0.2 3/4 %/V 3/4 3/4 24 V 3/4 1.25 3/4 mV/C 3/4 3/4 IOUT=10mA -40C<Ta<85C Dropout voltage is defined as the input voltage minus the output voltage that produces a 2% change in the output voltage from the value at VIN = VOUT+2V with a fixed load. HT75C0-1, +12.0V Output Type Symbol Parameter Ta=25C Test Conditions VIN VOUT Output Voltage 14V IOUT Output Current 14V DVOUT Load Regulation 14V VDIF Voltage Drop (Note) ISS Current Consumption D V D V O U T V IN VIN D V O D T Note: Unit U T O U T 14V Line Regulation 3/4 Input Voltage 3/4 Temperature Coefficient a 3/4 14V Min. Typ. Max. Unit 11.64 12.0 12.36 V 150 3/4 3/4 mA 1mAIOUT70mA 3/4 60 150 mV IOUT=1mA, DVOUT=2% 3/4 100 3/4 mV No load 3/4 2.5 5.0 mA 13VVIN24V IOUT=1mA 3/4 0.2 3/4 %/V 3/4 3/4 24 V 3/4 1.45 3/4 mV/C Conditions IOUT=10mA 3/4 3/4 IOUT=10mA -40C<Ta<85C Dropout voltage is defined as the input voltage minus the output voltage that produces a 2% change in the output voltage from the value at VIN = VOUT+2V with a fixed load. Rev. 2.00 10 March 21, 2012 HT75XX-1 Typical Performance Characteristics Rev. 2.00 11 March 21, 2012 HT75XX-1 Rev. 2.00 12 March 21, 2012 HT75XX-1 Rev. 2.00 13 March 21, 2012 HT75XX-1 Application Circuits Basic Circuit V IN V H T 7 5 X X -1 S e r ie s IN C 1 1 0 m F V V O U T C 2 1 0 m F G N D C o m m o n O U T C o m m o n S in g le p o in t G N D High Output Current Positive Voltage Regulator T r1 V V IN H T 7 5 X X -1 S e r ie s IN R 1 V V O U T G N D C 1 1 0 m F C o m m o n O U T C 2 1 0 m F C o m m o n S in g le p o in t G N D Short-Circuit Protection for Tr1 V R s IN T r1 V R 1 C 1 1 0 m F IN H T 7 5 X X -1 S e r ie s O U T C 2 1 0 m F S in g le p o in t G N D 14 V O U T G N D C o m m o n Rev. 2.00 V C o m m o n March 21, 2012 HT75XX-1 Circuit for Increasing Output Voltage V V IN IN V H T 7 5 X X -1 S e r ie s C 1 1 0 m F G N D IS V O U T C 2 1 0 m F S V O U T R 1 X X R 2 C o m m o n S in g le p o in t G N D C o m m o n R2 ) + ISS R2 R1 VOUT = VXX ( 1 + Circuit for Increasing Output Voltage V V IN IN V H T 7 5 X X -1 S e r ie s C 1 1 0 m F G N D IS V O U T C 2 V 1 0 m F S X X O U T R 1 D 1 C o m m o n S in g le p o in t G N D C o m m o n VOUT = VXX + VD1 Constant Current Regulator V V IN IN V H T 7 5 X X -1 S e r ie s C 1 1 0 m F G N D IS O U T C 2 1 0 m F V S X X R A IO U T R L C o m m o n IOUT = VXX + ISS RA Dual Supply IC 1 V V IN IN H T 7 5 X X -1 S e r ie s IC 2 V C 1 1 0 m F IN H T 7 5 X X -1 S e r ie s G N D V O U T O U T V C 2 1 0 m F C o m m o n Rev. 2.00 O U T C 3 1 0 m F G N D V V O U T R 1 C o m m o n 15 March 21, 2012 HT75XX-1 Package Information Note that the package information provided here is for consultation purposes only. As this information may be updated at regular intervals users are reminded to consult the Holtek website (http://www.holtek.com.tw/english/literature/package.pdf) for the latest version of the package information. 3-pin TO92 Outline Dimensions A B D C E F G H Symbol Nom. Max. A 0.170 3/4 0.200 B 0.170 3/4 0.200 C 0.500 3/4 3/4 D 0.011 3/4 0.020 E 0.090 3/4 0.110 F 0.045 3/4 0.055 G 0.045 3/4 0.065 H 0.130 3/4 0.160 a 0 3/4 10 Symbol Rev. 2.00 Dimensions in inch Min. Dimensions in mm Min. Nom. Max. A 4.32 3/4 5.08 B 4.32 3/4 5.08 C 12.70 3/4 3/4 D 0.28 3/4 0.51 E 2.29 3/4 2.79 F 1.14 3/4 1.40 G 1.14 3/4 1.65 H 3.30 3/4 4.06 a 0 3/4 10 16 March 21, 2012 HT75XX-1 3-pin SOT89 Outline Dimensions I A J B C E D G F Symbol Dimensions in inch Min. Nom. Max. A 0.173 3/4 0.181 B 0.059 3/4 0.072 C 0.090 3/4 0.102 D 0.035 3/4 0.047 E 0.155 3/4 0.167 F 0.014 3/4 0.019 G 0.017 3/4 0.022 H 3/4 0.059 3/4 I 55 3/4 63 J 14 3/4 17 Symbol A Rev. 2.00 H Dimensions in mm Min. Nom. Max. 4.39 3/4 4.60 B 1.50 3/4 1.83 C 2.29 3/4 2.59 D 0.89 3/4 1.19 E 3.94 3/4 4.24 F 0.36 3/4 0.48 G 0.43 3/4 0.56 H 3/4 1.50 3/4 I 1.40 3/4 1.60 J 0.36 3/4 0.43 17 March 21, 2012 HT75XX-1 5-pin SOT23-5 Outline Dimensions D C L H E q e A A 2 b Symbol Dimensions in inch Min. Nom. Max. 0.039 3/4 0.051 A1 3/4 3/4 0.004 A2 0.028 3/4 0.035 A b 0.014 3/4 0.020 C 0.004 3/4 0.010 D 0.106 3/4 0.122 E 0.055 3/4 0.071 e 3/4 0.075 3/4 H 0.102 3/4 0.118 L 0.015 3/4 3/4 q 0 3/4 9 Symbol Rev. 2.00 A 1 Dimensions in mm Min. Nom. Max. A 1.00 3/4 1.30 A1 3/4 3/4 0.10 A2 0.70 3/4 0.90 b 0.35 3/4 0.50 C 0.10 3/4 0.25 D 2.70 3/4 3.10 E 1.40 3/4 1.80 e 3/4 1.90 3/4 H 2.60 3/4 3.0 L 0.37 3/4 3/4 q 0 3/4 9 18 March 21, 2012 HT75XX-1 Product Tape and Reel Specifications TO92 Reel Dimensions (Unit: mm) P a c k a g e U p , F la t S id e U p 3 0 P a c k a g e U p , F la t S id e D o w n 4 3 5 8 8 8 3 6 0 Rev. 2.00 19 March 21, 2012 HT75XX-1 Reel Dimensions D T 2 A C B T 1 SOT89 Symbol Description Dimensions in mm A Reel Outer Diameter 180.01.0 B Reel Inner Diameter 62.01.5 C Spindle Hole Diameter 12.75 +0.15/-0.00 D Key Slit Width T1 Space Between Flange 12.4 +0.2/-0.0 T2 Reel Thickness 17.0 +0.0/-0.4 1.900.15 SOT23-5 Symbol Description Dimensions in mm A Reel Outer Diameter 178.01.0 B Reel Inner Diameter 62.01.0 C Spindle Hole Diameter 13.00.2 D Key Slit Width 2.500.25 T1 Space Between Flange 8.4 T2 Reel Thickness 11.4 Rev. 2.00 20 +1.5/-0.0 +1.5/-0.0 March 21, 2012 HT75XX-1 Carrier Tape Dimensions P D h W 2 H 1 H H 0 l1 W 0 t W 1 W F 1 F 2 D 0 P 2 P 0 TO92 Symbol Note: Description Dimensions in mm I1 Taped Lead Length (2.5) P Component Pitch 12.71.0 P0 Perforation Pitch 12.70.3 P2 Component to Perforation (Length Direction) 6.350.40 F1 Lead Spread 2.5 +0.4/-0.1 F2 Lead Spread 2.5 +0.4/-0.1 Dh Component Alignment W Carrier Tape Width W0 Hold-down Tape Width 6.00.5 W1 Perforation Position 9.00.5 W2 Hold-down Tape Position H0 Lead Clinch Height 16.00.5 H1 Component Height Less than 24.7 D0 Perforation Diameter 4.00.2 t Taped Lead Thickness 0.70.2 H Component Base Height 19.00.5 0.00.1 18.0 +1.0/-0.5 (0.5) Thickness less than 0.380.05mm~0.5mm P0 Accumulated pitch tolerance: 1mm/20pitches. ( ) Bracketed figures are for consultation only Rev. 2.00 21 March 21, 2012 HT75XX-1 Carrier Tape Dimensions P 0 D P 1 t E F W C D 1 B 0 P K 0 A 0 R e e l H o le IC M a r k in g SOT89 Symbol Description Dimensions in mm 12.0 +0.3/-0.1 W Carrier Tape Width P Cavity Pitch E Perforation Position 1.750.10 F Cavity to Perforation (Width Direction) 5.500.05 D Perforation Diameter 1.5 +0.1/-0.0 D1 Cavity Hole Diameter 1.5 +0.1/-0.0 P0 Perforation Pitch 4.00.1 P1 Cavity to Perforation (Length Direction) 2.00.1 A0 Cavity Length 4.80.1 B0 Cavity Width 4.50.1 K0 Cavity Depth 1.80.1 8.00.1 t Carrier Tape Thickness C Cover Tape Width 0.3000.013 9.30.1 SOT23-5 Symbol Description W Carrier Tape Width P Cavity Pitch E Perforation Position Dimensions in mm 8.00.3 4.00.1 1.750.10 F Cavity to Perforation (Width Direction) 3.500.05 D Perforation Diameter 1.5 +0.1/-0.0 D1 Cavity Hole Diameter 1.5 +0.1/-0.0 P0 Perforation Pitch P1 Cavity to Perforation (Length Direction) 2.000.05 A0 Cavity Length 3.150.10 B0 Cavity Width 3.20.1 K0 Cavity Depth 1.40.1 t Carrier Tape Thickness C Cover Tape Width Rev. 2.00 4.00.1 0.200.03 5.30.1 22 March 21, 2012 HT75XX-1 Holtek Semiconductor Inc. (Headquarters) No.3, Creation Rd. II, Science Park, Hsinchu, Taiwan Tel: 886-3-563-1999 Fax: 886-3-563-1189 http://www.holtek.com.tw Holtek Semiconductor Inc. (Taipei Sales Office) 4F-2, No. 3-2, YuanQu St., Nankang Software Park, Taipei 115, Taiwan Tel: 886-2-2655-7070 Fax: 886-2-2655-7373 Fax: 886-2-2655-7383 (International sales hotline) Holtek Semiconductor Inc. (Shenzhen Sales Office) 5F, Unit A, Productivity Building, No.5 Gaoxin M 2nd Road, Nanshan District, Shenzhen, China 518057 Tel: 86-755-8616-9908, 86-755-8616-9308 Fax: 86-755-8616-9722 Holtek Semiconductor (USA), Inc. (North America Sales Office) 46729 Fremont Blvd., Fremont, CA 94538, USA Tel: 1-510-252-9880 Fax: 1-510-252-9885 http://www.holtek.com Copyright O 2012 by HOLTEK SEMICONDUCTOR INC. The information appearing in this Data Sheet is believed to be accurate at the time of publication. However, Holtek assumes no responsibility arising from the use of the specifications described. The applications mentioned herein are used solely for the purpose of illustration and Holtek makes no warranty or representation that such applications will be suitable without further modification, nor recommends the use of its products for application that may present a risk to human life due to malfunction or otherwise. Holteks products are not authorized for use as critical components in life support devices or systems. Holtek reserves the right to alter its products without prior notification. For the most up-to-date information, please visit our web site at http://www.holtek.com.tw. Rev. 2.00 23 March 21, 2012