1. General description
The 74LVC14A is a high-performance, low-power, low-voltage, Si-gate CMOS device and
superior to most advanced CMOS compatible TTL families.
Inputs can be driven from either 3.3 V or 5 V devices. This feature allows the use of this
device as a translator in a mixed 3.3 V and 5 V environment.
The 74LVC14A provides six inverting buffers with Schmitt-trigger action. It is capable of
transforming slowly changing input signals into sharply defined, jitter-free output signals.
2. Features
■Wide supply voltage range from 1.2 V to 3.6 V
■5 V tolerant input for interfacing with 5 V logic
■CMOS low-power consumption
■Direct interface with TTL levels
■Inputs accept voltages up to 5.5 V
■Unlimited input rise and fall times
■Complies with JEDEC standard:
◆JESD8-B/JESD36 (2.7 V to 3.6 V)
■ESD protection:
◆HBM EIA/JESD22-A114-B exceeds 2000 V
◆MM EIA/JESD22-A115-A exceeds 200 V
■Multiple package options
■Specified from −40 °C to +85 °C and from −40 °C to +125 °C
3. Applications
■Wave and pulse shapers for highly noisy environments
■Astable multivibrators
■Monostable multivibrators
74LVC14A
Hex inverting Schmitt trigger with 5 V tolerant input
Rev. 04 — 15 February 2005 Product data sheet
9397 750 14591 © Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet Rev. 04 — 15 February 2005 2 of 19
Philips Semiconductors 74LVC14A
Hex inverting Schmitt trigger with 5 V tolerant input
4. Quick reference data
[1] CPD is used to determine the dynamic power dissipation (PD in µW).
PD = CPD × VCC2× fi× N + Σ(CL× VCC2× fo) where:
fi = input frequency in MHz;
fo = output frequency in MHz;
CL = output load capacitance in pF;
VCC = supply voltage in V;
N = number of inputs switching;
Σ(CL× VCC2× fo) = sum of the outputs.
[2] The condition is VI = GND to VCC.
5. Ordering information
Table 1: Quick reference data
Symbol Parameter Conditions Min Typ Max Unit
tPHL,
tPLH
propagation delay nA to
nY VCC = 3.3 V; CL = 50 pF - 3.2 - ns
CIinput capacitance - 4.0 - pF
CPD power dissipation
capacitance VCC = 3.3 V [1] [2] -10-pF
Table 2: Ordering information
Type number Package
Temperature range Name Description Version
74LVC14AD −40 °C to +125 °C SO14 plastic small outline package; 14 leads;
body width 3.9 mm SOT108-1
74LVC14ADB −40 °C to +125 °C SSOP14 plastic thin shrink small outline package; 14 leads;
body width 5.3 mm SOT337-1
74LVC14APW −40 °C to +125 °C TSSOP14 plastic thin shrink small outline package; 14 leads;
body width 4.4 mm SOT402-1
74LVC14ABQ −40 °C to +125 °C DHVQFN14 plastic dual in-line compatible thermal enhanced very thin
quad flat package; no leads; 14 terminals;
body 2.5 ×3×0.85 mm
SOT762-1
9397 750 14591 © Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet Rev. 04 — 15 February 2005 3 of 19
Philips Semiconductors 74LVC14A
Hex inverting Schmitt trigger with 5 V tolerant input
6. Functional diagram
Fig 1. Logic symbol Fig 2. IEC logic symbol
Fig 3. Logic diagram (one Schmitt trigger)
mna204
1A 1Y
12
2A 2Y
34
3A 3Y
56
4A 4Y
98
5A 5Y
11 10
6A 6Y
13 12
8
9
10
11
001aac497
12
13
2
1
4
3
6
5
mna025
AY
9397 750 14591 © Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet Rev. 04 — 15 February 2005 4 of 19
Philips Semiconductors 74LVC14A
Hex inverting Schmitt trigger with 5 V tolerant input
7. Pinning information
7.1 Pinning
7.2 Pin description
(1) The die substrate is attached to the
exposed die pad using conductive die
attach material. It can not be used as
a supply pin or input.
Fig 4. Pin configuration SO14, SSOP14
and TSSOP14 Fig 5. Pin configuration DHVQFN14
14A
1A VCC
1Y 6A
2A 6Y
2Y 5A
3A 5Y
3Y 4A
GND 4Y
001aac518
1
2
3
4
5
6
78
10
9
12
11
14
13
001aac519
14A
GND(1)
Transparent top view
3Y 4A
3A 5Y
2Y 5A
2A 6Y
1Y 6A
GND
4Y
1A
VCC
6 9
5 10
4 11
3 12
2 13
7
8
1
14
terminal 1
index area
Table 3: Pin description
Symbol Pin Description
1A 1 1 data input A
1Y 2 1 data output Y
2A 3 2 data input A
2Y 4 2 data output Y
3A 5 3 data input A
3Y 6 3 data output Y
GND 7 ground (0 V)
4Y 8 4 data output Y
4A 9 4 data input A
5Y 10 5 data output Y
5A 11 5 data input A
6Y 12 6 data output Y
6A 13 6 data input A
VCC 14 supply voltage
9397 750 14591 © Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet Rev. 04 — 15 February 2005 5 of 19
Philips Semiconductors 74LVC14A
Hex inverting Schmitt trigger with 5 V tolerant input
8. Functional description
8.1 Function table
[1] H = HIGH voltage level;
L = LOW voltage level.
9. Limiting values
[1] The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
[2] When VCC = 0 V (Power-down mode), the output voltage can be 3.6 V in normal operation.
[3] For SO14 packages: Ptot derates linearly with 8 mW/K above 70 °C.
For (T)SSOP14 packages: Ptot derates linearly with 5.5 mW/K above 60 °C.
For DHVQFN14 packages: Ptot derates linearly with 4.5 mW/K above 60 °C.
Table 4: Function table[1]
Input Output
nA nY
LH
HL
Table 5: Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to
GND (ground = 0 V).
Symbol Parameter Conditions Min Max Unit
VCC supply voltage −0.5 +6.5 V
VIinput voltage [1] −0.5 +6.5 V
VOoutput voltage [1] −0.5 VCC + 0.5 V
IIK input diode current VI < 0 V - −50 mA
IOK output diode current VO > VCC or VO < 0 V - ±50 mA
IOoutput source or sink
current VO = 0 V to VCC -±50 mA
ICC,
IGND
VCC or GND current - ±100 mA
Tstg storage temperature −65 +150 °C
Ptot total power dissipation Tamb = −40 °C to +125 °C[3] - 500 mW
9397 750 14591 © Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet Rev. 04 — 15 February 2005 6 of 19
Philips Semiconductors 74LVC14A
Hex inverting Schmitt trigger with 5 V tolerant input
10. Recommended operating conditions
11. Static characteristics
Table 6: Recommended operating conditions
Symbol Parameter Conditions Min Typ Max Unit
VCC supply voltage for maximum speed
performance 2.7 - 3.6 V
for low-voltage
applications 1.2 - 3.6 V
VIinput voltage 0 - 5.5 V
VOoutput voltage 0 - VCC V
Tamb ambient temperature −40 - +125 °C
Table 7: Static characteristics
At recommended operating conditions; voltages are referenced to GND (ground = 0 V).
Symbol Parameter Conditions Min Typ Max Unit
Tamb = −40 °C to +85 °C[1]
VOH HIGH-level output voltage VI = VIH or VIL
IO=−100 µA; VCC = 2.7 V to 3.6 V VCC − 0.2 - - V
IO=−8 mA; VCC = 2.3 V to 2.7 V VCC − 0.5 - - V
IO = −12 mA; VCC = 2.7 V VCC − 0.5 - - V
IO = −18 mA; VCC = 3.0 V VCC − 0.6 - - V
IO = −24 mA; VCC = 3.0 V VCC − 0.8 - - V
VOL LOW-level voltage output VI = VIH or VIL
IO= 100 µA; VCC = 2.7 V to 3.6 V - - 0.2 V
IO= 8 mA; VCC = 2.3 V to 2.7 V - - 0.6 V
IO = 12 mA; VCC = 2.7 V - - 0.4 V
IO = 24 mA; VCC = 3.0 V - - 0.55 V
ILI input leakage current VCC = 3.6 V; VI = 5.5 V or GND - ±0.1 ±5µA
ICC quiescent supply current VCC = 3.6 V; VI=V
CC or GND; IO= 0 A - 0.1 10 µA
∆ICC additional quiescent supply
current per input pin VCC = 2.7 V to 3.6 V; VI=V
CC −0.6 V;
IO = 0 A - 5 500 µA
CIinput capacitance - 4.0 - pF
Tamb = −40 °C to +125 °C
VOH HIGH-level output voltage VI = VIH or VIL
IO=−100 µA; VCC = 2.7 V to 3.6 V VCC − 0.3 - - V
IO=−8 mA; VCC = 2.3 V to 2.7 V VCC − 0.65 - - V
IO = −12 mA; VCC = 2.7 V VCC − 0.65 - - V
IO = −18 mA; VCC = 3.0 V VCC − 0.75 - - V
IO = −24 mA; VCC = 3.0 V VCC − 1--V
9397 750 14591 © Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet Rev. 04 — 15 February 2005 7 of 19
Philips Semiconductors 74LVC14A
Hex inverting Schmitt trigger with 5 V tolerant input
[1] All typical values are measured at Tamb = 25 °C.
12. Dynamic characteristics
[1] All typical values are measured at nominal VCC and Tamb = 25 °C.
[2] Skew between any two outputs of the same package switching in the same direction. This parameter is guaranteed by design.
[3] CPD is used to determine the dynamic power dissipation (PD in µW).
PD = CPD × VCC2× fi× N + Σ(CL× VCC2× fo) where:
fi = input frequency in MHz;
fo = output frequency in MHz;
CL = output load capacitance in pF;
VCC = supply voltage in V;
N = number of inputs switching;
Σ(CL× VCC2× fo) = sum of the outputs.
[4] The condition is VI = GND to VCC.
VOL LOW-level voltage output VI = VIH or VIL
IO= 100 µA; VCC = 2.7 V to 3.6 V - - 0.3 V
IO= 8 mA; VCC = 2.3 V to 2.7 V - - 0.75 V
IO = 12 mA; VCC = 2.7 V - - 0.6 V
IO = 24 mA; VCC = 3.0 V - - 0.8 V
ILI input leakage current VCC = 3.6 V; VI = 5.5 V or GND - - ±20 µA
ICC quiescent supply current VCC = 3.6 V; VI=V
CC or GND; IO=0A - - 40 µA
∆ICC additional quiescent supply
current per input pin VCC = 2.7 V to 3.6 V; VI=V
CC −0.6 V;
IO = 0 A --5mA
Table 7: Static characteristics
…continued
At recommended operating conditions; voltages are referenced to GND (ground = 0 V).
Symbol Parameter Conditions Min Typ Max Unit
Table 8: Dynamic characteristics
Voltages are referenced to GND (ground = 0 V); for test circuit see Figure 7.
Symbol Parameter Conditions Min Typ Max Unit
Tamb = −40 °C to +85 °C[1]
tPHL,
tPLH
propagation delay nA to nY see Figure 6
VCC = 1.2 V - 16 - ns
VCC = 2.3 V to 2.7 V 1.5 4.0 7.8 ns
VCC = 2.7 V 1.5 3.6 7.5 ns
VCC = 3.0 V to 3.6 V 1.0 3.2 6.4 ns
tsk(0) skew [2] - - 1.0 ns
CPD power dissipation capacitance VCC = 3.3 V [3] [4] -10-pF
Tamb = −40 °C to +125 °C
tPHL,
tPLH
propagation delay nA to nY see Figure 6
VCC = 1.2V ---ns
VCC = 2.3 V to 2.7 V 1.5 - 10.0 ns
VCC = 2.7 V 1.5 - 9.5 ns
VCC = 3.0 V to 3.6 V 1.0 - 8.0 ns
tsk(0) skew [2] - - 1.5 ns
9397 750 14591 © Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet Rev. 04 — 15 February 2005 8 of 19
Philips Semiconductors 74LVC14A
Hex inverting Schmitt trigger with 5 V tolerant input
13. Waveforms
Measurement points are given in Table 9.
Logic levels: VOL and VOH are typical output voltage drop that occur with the output load.
Fig 6. Propagation delay input (nA) to output (nY)
Table 9: Measurement points
Supply Input Output
VCC VMVM
1.2 V 0.5 × VCC 0.5 × VCC
2.3 V to 2.7 V 0.5 × VCC 0.5 × VCC
2.7 V 1.5 V 1.5 V
3.0 V to 3.6 V 1.5 V 1.5 V
mna344
tPHL tPLH
VM
VM
nA input
nY output
GND
VI
VOH
VOL
9397 750 14591 © Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet Rev. 04 — 15 February 2005 9 of 19
Philips Semiconductors 74LVC14A
Hex inverting Schmitt trigger with 5 V tolerant input
Test data is given in Table 10.
Definitions test circuit:
RT = Termination resistance should be equal to output impedance Zo of the pulse generator.
CL = Load capacitance including jig and probe capacitance.
RL = Load resistor.
VEXT = Test voltage for switching times.
Fig 7. Load circuitry for switching times
Table 10: Test data
Supply Input Load VEXT
VCC VItr, tfCLRLtPLH, tPHL
1.2 V VCC ≤ 2.5 ns 30 pF 500 Ωopen
2.3 V to 2.7 V VCC ≤ 2.5 ns 30 pF 500 Ωopen
2.7 V 2.7 V ≤ 2.5 ns 50 pF 500 Ωopen
3.0 V to 3.6 V 2.7 V ≤ 2.5 ns 50 pF 500 Ωopen
VEXT
VCC
VIVO
mna616
D.U.T.
CL
RT
RL
RL
PULSE
GENERATOR
9397 750 14591 © Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet Rev. 04 — 15 February 2005 10 of 19
Philips Semiconductors 74LVC14A
Hex inverting Schmitt trigger with 5 V tolerant input
14. Transfer characteristics
[1] All typical values are measured at nominal VCC and Tamb = 25 °C.
[2] Typical transfer characteristic is displayed in Figure 9.
Table 11: Transfer characteristics
The V
IH
and V
IL
from the family static characteristics are superseded by the V
T+
and V
T
−
.
Voltages are referenced to GND (ground = 0 V); see Figure 8.
Symbol Parameter Conditions Min Typ Max Unit
Tamb = −40 °C to +85 °C[1]
VT+ positive-going threshold VCC = 1.2 V - - 1.2 V
VCC = 2.5 V 0.9 - 1.7 V
VCC = 2.7 V 1.1 - 2.0 V
VCC = 2.7 V to 3.6 V 1.1 - 2.0 V
VT−negative-going threshold VCC = 1.2 V 0 - - V
VCC = 2.5 V 0.4 - 1.2 V
VCC = 2.7 V 0.8 - 1.5 V
VCC = 2.7 V to 3.6 V 0.8 - 1.5 V
VHhysteresis (VT+ − VT−)V
CC = 1.2 V - - - V
VCC = 2.5 V 0.3 - - V
VCC = 2.7 V 0.3 0.4 - V
VCC = 2.7 V to 3.6 V [2] 0.3 0.45 - V
Tamb = −40 °C to +125 °C
VT+ positive-going threshold VCC = 1.2 V - - 1.2 V
VCC = 2.5 V 0.9 - 1.7 V
VCC = 2.7 V 1.1 - 2.0 V
VCC = 2.7 V to 3.6 V 1.1 - 2.0 V
VT−negative-going threshold VCC = 1.2 V 0 - - V
VCC = 2.5 V 0.4 - 1.2 V
VCC = 2.7 V 0.8 - 1.5 V
VCC = 2.7 V to 3.6 V 0.8 - 1.5 V
VHhysteresis (VT+ − VT−)V
CC = 1.2 V - - - V
VCC = 2.5 V 0.2 - - V
VCC = 2.7 V 0.3 - - V
VCC = 2.7 V to 3.6 V 0.3 - - V
9397 750 14591 © Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet Rev. 04 — 15 February 2005 11 of 19
Philips Semiconductors 74LVC14A
Hex inverting Schmitt trigger with 5 V tolerant input
15. Waveforms transfer characteristics
VT− at 20 % and VT+ at 70 %
Fig 8. Definition of VT+, VT− and VH
VCC = 3.3 V.
Fig 9. Typical transfer characteristic
mna207
VO
VI
VHVT+
VT−
mna208
VO
VIVH
VT+
VT−
0 0.6 1.2 3
5
4
0
1
2
3
mna582
1.8 2.4 VI (V)
ICC
(mA)
9397 750 14591 © Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet Rev. 04 — 15 February 2005 12 of 19
Philips Semiconductors 74LVC14A
Hex inverting Schmitt trigger with 5 V tolerant input
16. Application information
(1) Positive-going edge.
(2) Negative going-edge.
Linear change of VI between 0.8 V to 2.0 V.
All values given are typical unless otherwise specified.
Fig 10. Average supply current as a function of supply voltage
at VCC = 3.0 V.
Fig 11. Relaxation oscillator
2.1 2.7 3.9
2.5
0.5
1.5
1.0
2.0
mna581
3.32.4 3.0 3.6
VCC (V)
ICC
(mA)
(1)
(2)
mna035
R
C
f1
T
--- 1
0.8 RC×
----------------------
≈=
9397 750 14591 © Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet Rev. 04 — 15 February 2005 13 of 19
Philips Semiconductors 74LVC14A
Hex inverting Schmitt trigger with 5 V tolerant input
17. Package outline
Fig 12. Package outline SOT108-1 (SO14)
UNIT A
max. A1A2A3bpcD
(1) E(1) (1)
eH
ELL
pQZywv θ
REFERENCES
OUTLINE
VERSION EUROPEAN
PROJECTION ISSUE DATE
IEC JEDEC JEITA
mm
inches
1.75 0.25
0.10 1.45
1.25 0.25 0.49
0.36 0.25
0.19 8.75
8.55 4.0
3.8 1.27 6.2
5.8 0.7
0.6 0.7
0.3 8
0
o
o
0.25 0.1
DIMENSIONS (inch dimensions are derived from the original mm dimensions)
Note
1. Plastic or metal protrusions of 0.15 mm (0.006 inch) maximum per side are not included.
1.0
0.4
SOT108-1
X
wM
θ
A
A1
A2
bp
D
HE
Lp
Q
detail X
E
Z
e
c
L
vMA
(A )
3
A
7
8
1
14
y
076E06 MS-012
pin 1 index
0.069 0.010
0.004 0.057
0.049 0.01 0.019
0.014 0.0100
0.0075 0.35
0.34 0.16
0.15 0.05
1.05
0.041
0.244
0.228 0.028
0.024 0.028
0.012
0.01
0.25
0.01 0.004
0.039
0.016
99-12-27
03-02-19
0 2.5 5 mm
scale
SO14: plastic small outline package; 14 leads; body width 3.9 mm SOT108-1
9397 750 14591 © Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet Rev. 04 — 15 February 2005 14 of 19
Philips Semiconductors 74LVC14A
Hex inverting Schmitt trigger with 5 V tolerant input
Fig 13. Package outline SOT337-1 (SSOP14)
UNIT A1A2A3bpcD
(1) E(1) eH
ELL
pQZywv θ
REFERENCES
OUTLINE
VERSION EUROPEAN
PROJECTION ISSUE DATE
IEC JEDEC JEITA
mm 0.21
0.05 1.80
1.65 0.25 0.38
0.25 0.20
0.09 6.4
6.0 5.4
5.2 0.65 1.25 0.2
7.9
7.6 1.03
0.63 0.9
0.7 1.4
0.9 8
0
o
o
0.13 0.1
DIMENSIONS (mm are the original dimensions)
Note
1. Plastic or metal protrusions of 0.25 mm maximum per side are not included.
SOT337-1 99-12-27
03-02-19
(1)
wM
bp
D
HE
E
Z
e
c
vMA
X
A
y
17
14 8
θ
A
A1
A2
Lp
Q
detail X
L
(A )
3
MO-150
pin 1 index
0 2.5 5 mm
scale
SSOP14: plastic shrink small outline package; 14 leads; body width 5.3 mm SOT337-1
A
max.
2
9397 750 14591 © Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet Rev. 04 — 15 February 2005 15 of 19
Philips Semiconductors 74LVC14A
Hex inverting Schmitt trigger with 5 V tolerant input
Fig 14. Package outline SOT402-1 (TSSOP14)
UNIT A1A2A3bpcD
(1) E(2) (1)
eH
ELL
pQZywv θ
REFERENCES
OUTLINE
VERSION EUROPEAN
PROJECTION ISSUE DATE
IEC JEDEC JEITA
mm 0.15
0.05 0.95
0.80 0.30
0.19 0.2
0.1 5.1
4.9 4.5
4.3 0.65 6.6
6.2 0.4
0.3 0.72
0.38 8
0
o
o
0.13 0.10.21
DIMENSIONS (mm are the original dimensions)
Notes
1. Plastic or metal protrusions of 0.15 mm maximum per side are not included.
2. Plastic interlead protrusions of 0.25 mm maximum per side are not included.
0.75
0.50
SOT402-1 MO-153 99-12-27
03-02-18
wM
bp
D
Z
e
0.25
17
14 8
θ
A
A1
A2
Lp
Q
detail X
L
(A )
3
HE
E
c
vMA
X
A
y
0 2.5 5 mm
scale
TSSOP14: plastic thin shrink small outline package; 14 leads; body width 4.4 mm SOT402-1
A
max.
1.1
pin 1 index
9397 750 14591 © Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet Rev. 04 — 15 February 2005 16 of 19
Philips Semiconductors 74LVC14A
Hex inverting Schmitt trigger with 5 V tolerant input
Fig 15. Package outline SOT762-1 (DHVQFN14)
terminal 1
index area
0.51
A1Eh
b
UNIT ye
0.2
c
REFERENCES
OUTLINE
VERSION EUROPEAN
PROJECTION ISSUE DATE
IEC JEDEC JEITA
mm 3.1
2.9
Dh
1.65
1.35
y1
2.6
2.4 1.15
0.85
e1
2
0.30
0.18
0.05
0.00 0.05 0.1
DIMENSIONS (mm are the original dimensions)
SOT762-1 MO-241 - - -- - -
0.5
0.3
L
0.1
v
0.05
w
0 2.5 5 mm
scale
SOT762-1
DHVQFN14: plastic dual in-line compatible thermal enhanced very thin quad flat package; no leads;
14 terminals; body 2.5 x 3 x 0.85 mm
A(1)
max.
AA1c
detail X
y
y1C
e
L
Eh
Dh
e
e1
b
26
13 9
8
7
1
14
X
D
E
C
BA
02-10-17
03-01-27
terminal 1
index area
AC
CB
vM
wM
E(1)
Note
1. Plastic or metal protrusions of 0.075 mm maximum per side are not included.
D(1)
9397 750 14591 © Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet Rev. 04 — 15 February 2005 17 of 19
Philips Semiconductors 74LVC14A
Hex inverting Schmitt trigger with 5 V tolerant input
18. Revision history
Table 12: Revision history
Document ID Release date Data sheet status Change notice Doc. number Supersedes
74LVC14A_4 20050215 Product data sheet - 9397 750 14591 74LVC14A_3
Modifications: •The format of this data sheet is redesigned to comply with the current presentation and
information standard of Philips Semiconductors.
•General text updates.
74LVC14A_3 20030228 Product specification - 9397 750 10536 74LVC14A_2
74LVC14A_2 20020315 Product specification - 9397 750 09449 74LVC14A_1
74LVC14A_1 19980428 Product specification - 9397 750 04484 -
Philips Semiconductors 74LVC14A
Hex inverting Schmitt trigger with 5 V tolerant input
9397 750 14591 © Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet Rev. 04 — 15 February 2005 18 of 19
19. Data sheet status
[1] Please consult the most recently issued data sheet before initiating or completing a design.
[2] The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at
URL http://www.semiconductors.philips.com.
[3] For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status.
20. Definitions
Short-form specification — The data in a short-form specification is
extracted from a full data sheet with the same type number and title. For
detailed information see the relevant data sheet or data handbook.
Limiting values definition — Limiting values given are in accordance with
the Absolute Maximum Rating System (IEC 60134). Stress above one or
more of the limiting values may cause permanent damage to the device.
These are stress ratings only and operation of the device at these or at any
other conditions above those given in the Characteristics sections of the
specification is not implied. Exposure to limiting values for extended periods
may affect device reliability.
Application information — Applications that are described herein for any
of these products are for illustrative purposes only. Philips Semiconductors
make no representation or warranty that such applications will be suitable for
the specified use without further testing or modification.
21. Disclaimers
Life support — These products are not designed for use in life support
appliances, devices, or systems where malfunction of these products can
reasonably be expected to result in personal injury. Philips Semiconductors
customers using or selling these products for use in such applications do so
at their own risk and agree to fully indemnify Philips Semiconductors for any
damages resulting from such application.
Right to make changes — Philips Semiconductors reserves the right to
make changes in the products - including circuits, standard cells, and/or
software - described or contained herein in order to improve design and/or
performance. When the product is in full production (status ‘Production’),
relevant changes will be communicated via a Customer Product/Process
Change Notification (CPCN). Philips Semiconductors assumes no
responsibility or liability for the use of any of these products, conveys no
license or title under any patent, copyright, or mask work right to these
products, and makes no representations or warranties that these products are
free from patent, copyright, or mask work right infringement, unless otherwise
specified.
22. Contact information
For additional information, please visit: http://www.semiconductors.philips.com
For sales office addresses, send an email to: sales.addresses@www.semiconductors.philips.com
Level Data sheet status[1] Product status[2] [3] Definition
I Objective data Development This data sheet contains data from the objective specification for product development. Philips
Semiconductors reserves the right to change the specification in any manner without notice.
II Preliminary data Qualification This data sheet contains data from the preliminary specification.Supplementary data will be published
at a later date. Philips Semiconductors reserves the right to change the specification without notice, in
order to improve the design and supply the best possible product.
III Product data Production This data sheet contains data from the product specification. Philips Semiconductors reserves the
right to make changes at any time in order to improve the design, manufacturing and supply. Relevant
changes will be communicated via a Customer Product/Process Change Notification (CPCN).
© Koninklijke Philips Electronics N.V. 2005
All rights are reserved. Reproduction in whole or in part is prohibited without the prior
written consent of the copyright owner. The information presented in this document does
not form part of any quotation or contract, is believed to be accurate and reliable and may
be changed without notice. No liability will be accepted by the publisher for any
consequence of its use. Publication thereof does not convey nor imply any license under
patent- or other industrial or intellectual property rights.
Date of release: 15 February 2005
Document number: 9397 750 14591
Published in The Netherlands
Philips Semiconductors 74LVC14A
Hex inverting Schmitt trigger with 5 V tolerant input
23. Contents
1 General description. . . . . . . . . . . . . . . . . . . . . . 1
2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
3 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
4 Quick reference data . . . . . . . . . . . . . . . . . . . . . 2
5 Ordering information. . . . . . . . . . . . . . . . . . . . . 2
6 Functional diagram . . . . . . . . . . . . . . . . . . . . . . 3
7 Pinning information. . . . . . . . . . . . . . . . . . . . . . 4
7.1 Pinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
7.2 Pin description . . . . . . . . . . . . . . . . . . . . . . . . . 4
8 Functional description . . . . . . . . . . . . . . . . . . . 5
8.1 Function table. . . . . . . . . . . . . . . . . . . . . . . . . . 5
9 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 5
10 Recommended operating conditions. . . . . . . . 6
11 Static characteristics. . . . . . . . . . . . . . . . . . . . . 6
12 Dynamic characteristics . . . . . . . . . . . . . . . . . . 7
13 Waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
14 Transfer characteristics. . . . . . . . . . . . . . . . . . 10
15 Waveforms transfer characteristics. . . . . . . . 11
16 Application information. . . . . . . . . . . . . . . . . . 12
17 Package outline . . . . . . . . . . . . . . . . . . . . . . . . 13
18 Revision history. . . . . . . . . . . . . . . . . . . . . . . . 17
19 Data sheet status. . . . . . . . . . . . . . . . . . . . . . . 18
20 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
21 Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
22 Contact information . . . . . . . . . . . . . . . . . . . . 18
