MS
CONNECTORS
according to MIL-C-5015
MS-6/0100
2
MS
Dimensions are mm
Subject to changes
Contents
General Information ........................................ 2
Shell Styles .................................................... 3
Technical Data ................................................ 4
Part number Explanation ................................ 5
Contact Arrangements .................................... 6
Wall Mounting Receptacle .............................. 17
Cable Connecting Plug ....................................18
Box Mounting Receptacle ............................... 19
Straight Plug ................................................... 19
90° Angle Plug .............................................. 20
Straight Plug, CA-F Type ............................... 21
Straight Plug, CA-E Type ............................... 22
Through-Bulkhead ......................................... 22
Accessories ................................................... 23
Contacts ....................................................... 27
Tooling ........................................................... 29
Product Safety Information ........................... 30
Different Classes
Connector classes MS 3106F, MS 3106R and
MS 3108R feature an O-ring under the coupling
nut. It is missing on connectors class MS 3106E
and MS 3108E.
To reduce size and weight, connector classes
MS 3100R, MS 3101R and MS 3106R have no
cable strain relief. The 90° angle plug MS 3106R
has no cable clamp and is suitable for hose
connection. Strain relief for this connector has
to be ordered separately (see page 23). More-
over, construction and materials used are identi-
cal for all connector classes.
Different Designations
Connectors with MS designation conform to
MIL-C-5015 in respect of dimensions and con-
tact arrangements.
Deviations from this specification, e. g. crimp
contacts, other shell or contact finishes, are
designated CA.
Introduction
This catalogue describes Cannon connectors
designed and manufactured to MIL-C-5015, the
military specification covering MS electrical
connectors. These connectors were originally
designed for aircraft, but are now widely used in
many other fields. They are particularly suitable
for commercial applications requiring low cost
and high reliability.
The design of connector classes MS-E, MS-F and
MS-R conforms to MIL-C-5015 D. The new class
F connectors supersede the previous class E
connectors. For new programs only class F
should be ordered.The coupling measurements
as well as the dimensions of class MS-E, -F and
-R are in accordance with the latest revision of
VG 0095342. Wall mount receptacle, box re-
ceptacle, cable connector and straight plug have
the same coupling dimensions. This allows
mating of the different classes of these connec-
tors.
The connectors of class E, F and R are designed
to operate in extreme environmental conditions.
These connectors are completely sealed to
withstand moisture, condensation, vibration and
flash-over. MS-F and MS-R connectors have a
resilient grommet around each wire. This allows
the wires to slide through the grommet with a
minimum of friction. Yet when the ferrule is
sealed and the endbells are tightened, it provides
perfect wire seal through a wide variety of wire
diameters. This seal at the rear plus the interfacial
seal at the front, effect a completely environmen-
tal resistant assembly when the plug is mated
to an F or R receptacle.
Design Features
Straight Plug (E- and F-Types) O Ring
MS-F
only
Straight Plug (R-Type)
Bushing Endbell Ferrule Grommet Pin contacts Insulator Coupling Nut Barrel O Ring
MS
3
Wall mounting receptacles MS 3100E and F / CA 3100E
Dimensions / sizes Page 17
Wall mouting receptacle MS 3100R / CA 3100R
Dimensions / sizes Page 17
Cable connecting plug MS 3101E and F / CA 3101E
Dimensions / sizes Page 18
Cable connecting plug MS 3101R / CA 3101R
Dimensions / sizes Page 18
Box mounting receptacle MS 3102E and R / CA 3102E
Dimensions / sizes Page 19
Straight plug MS 3106E and F / CA 3106E and CA06R
Dimensions / sizes Page 19
Straight plug MS 3106R / CA 3106R
Dimensions / sizes Page 20
90° Angle plug MS 3108E and R / CA 3108E / R
(MS3108R, CA3108F/R without cable clamp)
Dimensions / sizes Page 20
Straight plug CA 3106F
Dimensions / sizes Page 21
Accessories: Cable clamps, Telescoping bushings,
Sealing gaskets, Protective caps with and without chain,
Dummy receptacles, etc. Pages 23 – 26
Shell styles and designations
4
MS
Dimensions are mm
Subject to changes
Standard Data
Shell Material Aluminum alloy
Finish Olive drab chromate coating over cadmium plating
Insulator Material Polychloroprene (resilient) acc. to MI-R-3065
Contacts Material Copper alloy or brass
Finish Silver plated, solder pot tinned
Termination Crimp or solder for AWG and metric contact size
Operating Temperature –55/125°C
Separation Force (N)
Contact sizes AWG –16S/16 12 8 4 0
Metric 10 15S/15 25 100 160 500
Separation force N min. 0,3 1,0 1,5 3 4 8,5
Please note:
Connector classes 00E / F, 01E / F, 06E / F and 08E are always delivered with cable bushing. Dimensions
of cable bushing see page 22.
Electrical Data
Operating voltage and connector usage
When the connectors in this catalogue are used for voltages greater than 50 Volts and have touchable
conductive shell parts they must be used in accordance with the safety regulations DIN VDE Part 410;
IEC 60364-4-41. This regulation basically dictates that the power source should be turned off before
any mating and unmating of the connector, this regulation does not provide for protection against
electrical shock when mating and unmating the connectors in the live condition.
Nominal current and potential drop
Maximum current ratings of contacts and maximum allowable voltage drop under test conditions
when assembled as in service are shown below.
Contact size AWG 16S/16 12 8 4 0
Contact size metric 15S/15 25 100 160 500
Wire size mm21,0/1,5 2,5 10 16 50
Current rating A* 22 41 73 135 245
Potential drop mV 6 3 1 0,3 0,2
*measured between the contacts at +25-3 °C
Service rating
MS connectors show no evidence of breakdown when the test voltage given below is applied between
the two closest contacts and between the shell and the contacts closest to the shell for a period of
one minute.
High potential test voltage is conducted in VG 95319 part 2 test no. 5.13 and VG 95210 part 31.
MS Service rating Instruments A D E
Test voltage Veff 50 Hz 1050 1600 2500 3000
Air spacing mm 0,7 1,1 2,8 4,8
Creeping distance mm 0,7 1,1 2,8 4,8
MS
5
Prefix
MS – conform to MIL-C-5015
CA – Cannon designation for any modification
Shell style
(see pages 17 – 22)
3100 – wall mounting receptacle
3101 – cable connecting plug
3102 – box mounting receptacle
3106 – straight plug
3108 – 90° plug
Class
E –with resilient insulator and integral clamp for
cable strain relief
F –same as E, however style 3106 with O-ring seal
under the coupling nut
R –with resilient insulator and shortened,
lightweight endbell (additional sealing with
O-ring under the coupling nut for shell styles
3106 and 3108)
Shell size
10S, 12S, 12, 14S, 14, 16S, 16, 18, 20, 22, 24, 28, 32
and 36
Contact arrangements
See pages 6 through 16
Contact type
P – pin
S – socket
Alternate insert position
Modifications
A176 –Contacts hard gold over nickel
F 80 –Snap-in crimp contacts for AWG size
conductors
F183 –Snap-in crimp contacts for metric conductors
(Crimp contacts are to be ordered separately
and will be supplied as loose pieces. After
wiring they are inserted into the insulator by the
customer)
MS 3106 R 18-1 P W *
CA 3106 F 18-1 S - F80*
Part Number Explanation
6
MS
Dimensions are mm
Subject to changes
In the table on pages 7 – 14 the contact arran-
gements are listed by shell sizes. The shell size
and the contact arrangement number are given
in the designation printed in bold typefaces: the
digits following the dash are the contact arran-
gement number (see Part Number Explanation
on page 5).
Furthermore, the number of contacts and the
AWG wire sizes are included in the table. The
recommended wire sizes are shown on this page,
the electrical data on page 4.
Contact size Conductor size Insulation sizes
for solder contacts for crimp contacts (in mm) for
AWG mm2AWG conductor ∅metric conductor ∅AWG metric
mm mm2mm contacts contacts
– / 10 –– –– 0,75 1,0 1,0 - 1,4 –2,0 - 2,5
16S/15S 16-22 1,2 - 0,4 16 1,25 - 1,7 1,0 - 1,7 1,25 - 1,7 1,63 - 3,3 2,2 - 2,8
16 / 15 16-22 1,2 - 0,4 16 1,25 - 1,7 1,0 - 1,5 1,25 - 1,7 1,63 - 3,3 2,2 - 2,8
12 / 15 12-14 3,5 - 2,0 12 1,95 - 2,2 2,5 1,95 - 2,2 2,9 - 4,3 3,1 - 3,5
8 / 100 8 - 10 8,5 - 4,5 8 4,0 - 4,5 10 4,3 - 4,8 2,9 - 6,4 5,9 - 6,5
4 / 160 4 - 6 21,5 - 13,5 4 6,0 - 6,9 16 5,2 - 6,0 7,0 - 9,4 7,1 - 7,7
0 / 500 0 - 2 53,0 - 33,5 0 10,6 - 11,5 50 9,6 - 10,7 10,6 - 14,0 12,1 - 12,8
Pin insert front view
The connectors are designed for individual
wiring. Spray water and moisture resistance are
only guaranteed if wires according to MIL-W-
5086, LN 9251 (for AWG diameters), TL 6145-
009 and TL 6145-011 (for metric diameters) are
Wire Selection
Contact Arrangements
used. When using wires which do not cor-
respond to these specifications the wire dia-
meters and outer dimensions of the insulation
indicated in below table have to be adhered to.
Alternate Insert Positions
Alternate insert positions can be offered to prevent
mismating of adjacent identic connectors.
The standard insert position is without designa-
tion. The four alternate positions are designated
W, X, Y and Z (see diagram below).
Please note:
All MS qualified insert positions are listed on
pages 7 – 14. Other positions than normal are
not available from stock.
MS
7
Contact Arrangements
No. of Contact Service Insulator position – see diagram on page 6 Insulator weight (g)
contacts arrangement rating W X Y Z including contacts
Contact size
AWG pin socket
310SL-3 ●▼ A - ---69
16S
210SL-4 A - ---46
16S
212S-3 ●+A 70 145 215 290 4 6
16S
112-5 ●D----
12
314S-1 A - ---69
16S
414S-2 + Inst. - 120 240 - 7 11
16S
514S-5 ●+Inst. - 110 - - 9 13
16S
614S-6 ●▼ Inst. - - - - 11 15
16S
314S-7 ●+A 90 180 270 - 6 9
16S
● MIL-C-5015 contact arrangement ▼ VG95234 contact arrangement + MS polarization
8
MS
Dimensions are mm
Subject to changes
Contact Arrangements
Contact Arrangements
No. of Contact Service Insulator position – see diagram on page 6 Insulator weight (g)
contacts arrangement rating W X Y Z including contacts
Contact size
AWG pin socket
214S-9 + INST 70 145 215 290 5 18
16S
716S-1 ●▼+A 80 - - 280 14 19
16S
516S-8 ●+A - 170 265 - 10 15
16S
316-7 + A 80 110 250 280 16 25
2 16 (A, B)
1 8 (C)
416-9 ●+A 35 110 250 325 13 20
2 16 (B,D)
2 12 (A,C)
316-10 ●▼ A 90 180 270 - 17 24
12
216-11 ●+A 35 110 250 325 11 17
12
116-12 A0---2428
4
10 18-1 ▼+A (B, C, F, G) 70 145 - 290 24 37
16 INST (all other)
218-3 + D----1322
12
418-4 ●+D 35 110 250 325 19 30
16
● MIL-C-5015 contact arrangement ▼ VG95234 contact arrangement + MS polarization
MS
9
Contact Arrangements
Contact Arrangements
No. of Contact Service Insulator position – see diagram on page 6 Insulator weight (g)
contacts arrangement rating W X Y Z including contacts
Contact size
AWG pin socket
318-5 ●+D 80 110 250 280 15 25
1 16 (A)
2 12 (B,C)
818-8 ●+A 70 - - 290 18 30
7 16 (A-G)
1 12 (H)
718-9 ●+INST 80 110 250 280 18 30
5 16 (B,C,E-G)
2 12 (A,D)
418-10 + A - 120 240 - 13 22
12
518-11 ●+A - 170 265 - 31 40
12
618-12 + A 80 - - 280 15 25
16
418-13 ●+A 80 110 250 280 15 24
3 12 (B,C)
1 8 (A)
120-2 ●▼ D----4655
0
420-4 ●+D 45 110 250 - 24 40
12
820-7 ●+A (C-F) 80 110 250 280 28 42
16 D (A;B;G;H)
620-8 ●INST 80 110 250 280 37 49
4 16 (B;C;E;F)
2 8 (A;D)
920A9 ●D (J) - - - - 21 35
12 A (all other)
● MIL-C-5015 contact arrangement ▼ VG95234 contact arrangement + MS polarization
10
MS
Dimensions are mm
Subject to changes
Contact Arrangements
No. of Contact Service Insulator position – see diagram on page 6 Insulator weight (g)
contacts arrangement rating W X Y Z including contacts
Contact size
AWG pin socket
19 20A48 ▼INST - 80 280 - 30 50
16
720-15 + A 80 - - 280 27 46
12
920-16 ●+A 80 110 250 280 19 32
7 16 (A-G)
2 12 (H;I)
620-17 ●+A 90 180 270 - 20 33
1 16
5 12
320-19 + A 90 180 270 - 33 46
8
420-24 ●+A 35 110 250 325 40 53
2 16 (A;C)
2 8 (B;D)
14 20-27 ●+A 35 110 250 325 26 42
16
17 20-29 ●+A 80 - - 280 29 47
16
11 20-33 ●A----2338
16
322-2 ●▼+D 70 145 215 290 35 50
8
● MIL-C-5015 contact arrangement ▼ VG95234 contact arrangement + MS polarization
MS
11
Contact Arrangements
No. of Contact Service Insulator position – see diagram on page 6 Insulator weight (g)
contacts arrangement rating W X Y Z including contacts
Contact size
AWG pin socket
122-7 ●E0---4557
0
322-9 ●+E 70 145 215 290 21 32
12
522-12 ●+D 80 110 250 280 28 42
3 16 (A;C;D)
2 8 (B;E)
19 22-14 ●+A 80 - - 280 30 50
16
14 22-19 ●+A 80 110 250 280 28 47
16
922-20 + A 35 110 250 325 29 41
16
422-22 + A - 110 250 - 38 50
8
822-23 ●+D (H) 35 - 250 - 34 54
12 A (all others)
922-27 ●▼+D (J) 80 - 250 280 31 44
8 16 (A-H) A (all others)
1 8 (J)
722-28 + A----3854
12
● MIL-C-5015 contact arrangement ▼ VG95234 contact arrangement + MS polarization
12
MS
Dimensions are mm
Subject to changes
Contact Arrangements
No. of Contact Service Insulator position – see diagram on page 6 Insulator weight (g)
contacts arrangement rating W X Y Z including contacts
Contact size
AWG pin socket
724-2 ●+D 80 - - 280 33 53
12
16 24-7●+A 80 110 250 280 45 65
14 16 (A-M,O)
2 12 (P,N)
724-10 ●▼+A 80 - - 280 65 85
8
924-11 ●▼+A 35 110 250 325 55 75
6 12 (A-C,G-I)
3 8 (D;F)
524-12 ▼A----6080
3 12
2 4
12 24-19 A----2847
16
11 24-20 ●+D 80 110 250 280 40 60
9 16 (A-D,G-L)
2 12 (E;F)
424-22 ●+D 45 110 250 - 44 61
8
24 24-28 + Inst. 80 110 250 280 40 65
16
● MIL-C-5015 contact arrangement ▼ VG95234 contact arrangement + MS polarization
MS
13
Contact Arrangements
No. of Contact Service Insulator position – see diagram on page 6 Insulator weight (g)
contacts arrangement rating W X Y Z including contacts
Contact size
AWG pin socket
22 28-11 + A 80 110 250 280 65 110
18 16 (A-I,N-X)
4 12 (J-M)
26 28-12 ●+A 90 180 270 - 47 77
16
35 28-15 + A 80 110 250 280 54 90
16
14 28-20 ●+A 80 110 250 280 65 110
4 16 (K-N)
10 12 (A-J,P)
37 28-21 ●▼+A 80 110 250 280 58 93
16
928A16 A (e) - 100 260 - 85 135
5 16 (A;D-F;J) INST (all other)
4 4 (B;C;G;H)
28 28A63 ▼- - - - 85 135
9 12 A (e)
19 16 INST (all other)
532-1 ●▼+E (A) 80 110 250 280 - -
3 12 (A, C, D) D (all other)
2 0 (B, E)
● MIL-C-5015 contact arrangement ▼ VG95234 contact arrangement + MS polarization
14
MS
Dimensions are mm
Subject to changes
Contact Arrangements
No. of Contact Service Insulator position – see diagram on page 6 Insulator weight (g)
contacts arrangement rating W X Y Z including contacts
Contact size
AWG pin socket
232-5 +D 35 110 250 325 86 114
0
23 32-6 ●▼+A 80 110 250 280 130 170
16 16 (A-D;S)
2 12 (U;V)
3 8 (P-T)
1 4 (W;X)
35 32-7 ●▼+INST (A;B;h;i) 80 125 235 280 110 160
28 16 (A-N;W;Z;a;k) A (all other)
7 12 (O-V)
30 32-8 + A 80 125 235 280 105 155
24 16 (A-L;T-Z;a-e)
6 12 (M-S)
432-17 ●+D 45 110 250 - 101 128
4
61 32A69 ▼INST - 110 250 - 49 84
41 20
20 16
436-5 ●▼+A - 120 240 - 152 181
0
48 36-10 ●▼+A 80 125 235 280 79 133
16
● MIL-C-5015 contact arrangement ▼ VG95234 contact arrangement + MS polarization
MS
15
Contact No. of Wire size Amp. Service Weight
arrange- contacts AWG mm2group Polychloroprene
ment insert
lbs. gr.
Shell size 10S/10SL
10SL-3 3 16 1,5 22 A P.010 4
S.017 8
10SL-4 2 16 1,5 22 A P.009 4
S.014 6
Shell size 12/12
12S-3 2 16 1,5 22 A P.010 5
S.016 7
12-5 1 12 2,5 41 D P.- -
Shell size 14/14S
14S-1 3 16 1,5 22 A P.- -
S.- -
14S-2 4 16 1,5 22 Inst. P.019 9
S.028 13
14S-5 5 16 1,5 22 Inst. P.017 8
S.029 13
14S-6 6 16 1,5 22 Inst. P.031 15
S.015 7
14S-7 3 16 1,5 22 A P.015 7
S.024 11
14S-9 2 16 1,5 22 A P.013 6
S.022 10
Shell size 16/16S
16S-1 7 16 1,5 22 A P.025 11
S.042 19
16-7 1 8 10,0 73 A P.- -
2 16 1,5 22 S.- -
16S-8 5 16 1,5 22 A P.023 10
S.039 18
16S-9 5 16 1,5 22 A P.023 10
S.039 18
16-9 2 12 2,5 41 A P.031 14
2 16 1,5 22 A S.044 20
16-10 3 12 2,5 41 A P.031 14
S.047 21
16-11 2 12 2,5 41 A P.028 13
S.042 19
16-12 1 4 16,0 135 A P.031 14
S.047 21
Shell size 18
18-1 10 18 1,5 22 A (B,C,F,G) P.044 20
Inst.
(all others) S.058 26
18-3 2 12 2,5 41 D P.038 17
S.057 26
18-4 4 16 1,5 22 D P.037 17
S.053 24
Contact No. of Wire size Amp. Service Weight
arrange- contacts AWG mm2group Polychloroprene
ment insert
lbs. gr.
Shell size 18 (continued)
18-5 2 12 2,5 41 D P.040 18
1 16 1,5 22 S.059 27
18-6 1 4 16,0 13,5 D P.048 22
S. - -
18-8 1 12 2,5 41 A P.044 20
7 16 1,5 22 S.062 28
18-9 2 12 2,5 4 Inst. P.045 20
5 16 1,5 22 S.062 28
18-10 4 12 2,5 41 A P.046 21
S.067 30
18-11 5 12 2,5 41 A P.049 22
S.071 32
18-12 6 16 1,5 22 A P.039 18
S.054 24
18-13 1 8 10,0 73 A P.- -
S.- -
Shell size 20
20-2 1 0 50 245 D P.092 41
S.101 45
20-4 4 12 2,5 41 D P.057 26
S.086 38
20-7 8 16 1,5 22 A
(C,D,E,F) P.053 26
D
(A,B.H.G) S.076 34
20-15 7 12 2,5 41 A P.068 30
S.100 45
20-16 2 12 2,5 41 A P.059 26
7 16 1,5 22 S.084 38
20-17 5 12 2,5 41 A P.068 31
1 16 1,5 22 S.098 38
20-19 3 8 10,0 73 A P.068 31
S.091 41
20-24 2 8 10,0 73 A P.062 28
2 16 1,5 22 S.085 38
20-27 14 16 1,5 22 A P.062 28
S.082 37
20-29 17 16 1,5 22 A P.065 29
S.085 38
20-33 11 16 1,5 22 A P.057 25
S.079 35
20A9 9 - 2,5 41 D for J P.020 9
S.033 15
20A48 19 - 1,5 22 Inst. P .020
S.036 16
20-8 4 16 1,5 22 Inst. P.059 26
2 8 10 73 S.080 36
Contact Arrangements
16
MS
Dimensions are mm
Subject to changes
Contact No. of Wire size Amp. Service Weight
arrange- contacts AWG mm2group Polychloroprene
ment insert
lbs. gr.
Shell size 22
22-2 3 8 10 73 D P.077 34
S.104 47
22-7 1 0 50 245 E P.101 -
S.-
22-9 3 12 2,5 41 E P.062 28
S.092 42
22-12 2 8 10 73 D P.072 32
3 16 1,5 22 S.100 45
22-14 19 16 1,5 22 A P.077 34
S.100 45
22-19 14 16 1,5 22 A P.070 31
S.095 43
22-20 9 16 1,5 22 A P.063 29
S.090 41
22-22 4 8 10 73 A P.085 38
S.112 50
22-23 8 12 2,5 41 D (H) P.080 36
A
(all others) S.118 53
22-27 1 8 10 73 A (H) P.070 31
8 16 2,5 22 D (J) S.097 44
22-28 7 12 2,5 41 A P.086 38
S.120 54
Shell size 24
24-2 7 12 2,5 41 D P.089 40
S.133 60
24-7 2 12 2,5 41 A P.090 40
14 16 1,5 22 S.125 56
24-10 7 8 10 73 A P.125 56
S.157 71
24-11 3 8 10 73 A P.111 50
6 12 2,5 41 S.153 69
24-12 3 12 10 41 A P.027 12
2 4 16 135 S.051 23
24-19 12 16 1,5 22 A P.- -
S.- -
24-20 2 12 2,5 41 D P.083 37
9 16 1,5 22 S.120 54
24-22 4 8 10 73 D P.- -
S.132 59
24-28 24 16 1,5 22 Inst. P.096 43
S.126 57
Contact No. of Wire size Amp. Service Weight
arrange- contacts AWG mm2group Polychloroprene
ment insert
lbs. gr.
Shell size 28
28-11 4 12 2,5 41 A P.131 59
18 16 1,5 22 S.182 53
28-12 26 16 1,5 22 A P.127 57
S.172 78
28-15 35 16 1,5 22 A P.139 63
S.181 82
28-20 10 12 2,5 41 A P.134 80
4 16 1,5 22 S.196 89
28-21 37 16 1,5 22 A P.142 64
S.183 83
28A16 4 4 16 135 A P.- -
5 16 1,5 22 S.- -
28A63 19 - 1,5 22 A P.042 19
9 - 2,5 41 S.077 35
Shell size 32
32-1 2 0 50 245 E (A) P.- -
3 12 2,5 41 D
(all others) S.- -
32-5 2 0 50 245 D P.- -
S.- -
32-6 2 4 16 135 A P.-223 101
3 8 10 73 S.287 130
2 12 2,5 41
16 16 1,5 22
32-7 7 12 2,5 41 Inst.
(A,B,h,j) P.198 89
28 16 1,5 22 D
(all others) S.274 124
32-8 6 12 2,5 41 A P.189 86
24 16 1,5 22 S.265 120
32-17 4 4 16 135 D P.223 101
S.283 129
32A69 41 - 1,0 7,5 Inst. P.119 54
20 - 1,5 22 S.121 55
Shell size 36
36-5 4 0 50 245 A P.- -
S.-
36-10 48 16 1,5 22 A P.214 97
S.321 145
For additional contact arrangements please consult factory.
Contact Arrangements
MS
17
Order reference A B K L M P R S T
Pin insert* Thread min. ±0,7 max. +0,4 max. ±0,1 ±0,3 +0,2 / –0,1
MS3100R-10SL-**P 5/8-24NEF-2A 9,5 3,0 45 14,2 24,4 18,2 25,4 3,1
MS3100R-12S-**P 3/4-20UNEF-2A 9,5 3,0 45 14,2 24,4 20,6 28,0 3,1
MS3100R14S-**P 7/8-20UNEF-2A 9,5 3,0 55 14,2 29,0 23,0 30,0 3,1
MS3100R16S-**P 1 -20UNEF-2A 9,5 3,0 55 14,2 31,5 24,6 32,5 3,1
MS3100R12-**P 3/4-20UNEF-2A 15,8 3,0 55 19,0 24,4 20,6 28,0 3,1
MS3100R14-**P 7/8-20UNEF-2A 15,8 3,0 55 19,0 29,0 23,0 30,0 3,1
MS3100R16-**P 1 -20UNEF-2A 15,8 3,0 55 19,0 31,5 24,6 32,5 3,1
MS3100R18-**P 1 1/8-18NEF-2A 15,8 3,9 60 19,0 36,6 27,0 35,0 3,1
MS3100R20-**P 1-1/4-18NEF-2A 15,8 3,9 60 19,0 39,7 29,4 38,0 3,1
MS3100R22-**P 1-3/8-18NEF-2A 15,8 3,9 60 19,0 39,7 31,8 41,0 3,1
MS3100R24-**P 1-1/2-18NEF-2A 15,8 3,9 60 20,6 47,4 34,9 44,5 3,7
MS3100R26-**P 1-3/4-18 S-2A 15,8 3,9 67 20,6 47,4 39,7 50,8 3,7
MS3100R32-**P 2 -18NS-2A 15,8 3,9 67 22,2 55,9 44,5 57,0 4,4
MS3100R36-**P 2-1/4-16UN-2A 15,8 3,9 85 22,2 60,8 49,2 63,5 4,4
*For socket inserts substitute S for P **Add contact arrangement number (see pages 7 – 14)
MS3100R / CA3100R
The MS3100R receptacles feature a shorter
and lightweight endbell and mate with 3106
and 3108 plugs.
If crimp version is required please order
CA3100R...F80 or CA3100R...F183
Order reference A B E1) KL M R SVWT
Pin insert* Thread min. max. ±0,7 max. +0,4 ±0,1 ±0,3 max. max. +0,2 / –0,1
MS3100E10SL-**P 5/8-24 EF-2A 9,5 6,5 3,0 60 14,2 18,2 25,4 22,7 27,0 3,1
MS3100E-12S-**P 3/4-20UNEF-2A 9,5 6,5 3,0 60 14,2 20,6 28,0 22,7 27,0 3,1
MS3100E14S-**P 1/8-20UNEF-2A 9,5 9,0 3,0 70 14,2 23,0 30,0 27,5 34,0 3,1
MS3100E16S-**P 1 -20UNEF2A 9,5 11,0 3,0 70 14,2 24,6 32,5 30,0 38,0 3,1
MS3100E12-**P 3/4-20UNEF-2A 15,8 6,5 3,0 70 19,0 20,6 28,0 22,7 27,0 3,1
MS3100E14-**P 7/8-20UNEF-2A 15,8 9,0 3,0 70 19,0 23,0 30,0 27,5 34,0 3,1
MS3100E16-**P 1 -20UNEF-2A 15,8 11,0 3,0 70 19,0 24,6 32,5 30,0 38,0 3,1
MS3100E18-**P 1-1/8-18NEF-2A 15,8 14,2 3,9 77 19,0 27,0 35,0 32,2 40,5 3,1
MS3100E20-**P 1-1/4-18NEF-2A 15,8 15,8 3,9 77 19,0 29,4 38,0 37,5 47,5 3,1
MS3100E22-**P 1-3/8-18NEF-2A 15,8 15,8 3,0 77 19,0 31,8 41,0 37,5 47,5 3,1
MS3100E24-**P 1-1/2-18NEF-2A 15,8 21,4 3,9 77 20,6 34,9 44,5 43,3 54,0 3,7
MS3100E28-**P 1-3/4-18NS-2A 15,8 21,4 3,0 85 20,6 39,7 50,8 43,3 54,0 3,7
MS3100E32-**P 1 -18NS-2A 15,8 26,7 3,9 85 22,2 44,5 57,0 51,7 64,5 4,4
MS3100E36-**P 2-1/4-16UN-2A 15,8 31,7 3,9 105 22,2 49,2 63,5 58,0 73,0 4,4
*For socket inserts substitute S for P **Add contact arrangement number (see pages 7 – 14) 1) maximum cable diameter
MS3100E / CA3100E /
MS3100F
MS3100E and F are wall mounting recep-
tacles which mate with 3106 and 3108 plugs.
Note: MS3100E corresponds to MS3100F
and is available upon request. For new
programs please order MS3100F only.
If crimp version is required please order
CA3100E...F80 or CA3100E...F183
Wall Mounting Receptacle
18
MS
Dimensions are mm
Subject to changes
MS3101R / CA3101R
MS3101 cable connecting plugs without
coupling nut feature a shorter and light-
weight endbell than MS3101E and mate
with 3106 and 3108 plugs.
If crimp version is required please order
CA3101R..F80 or CA3101R...F183
Order reference A B G K L M P S
Pin insert* Thread min. max. ±0,7 max. +0,4 max. max
MS3101R10SL-**P 5/8-24NEF-2A 9,5 21,8 3,0 45 14,2 24,4 16,2
MS3101R12S-**P 3/4-20UNEF-2A 9,5 25,0 3,0 45 14,2 24,4 19,9
MS3101R14S-**P 7/8-20UNEF-2A 9,5 28,2 3,0 55 14,2 29,0 22,5
MS3101R16S-**P 1 -20UNEF-2A 9,5 31,4 3,0 55 14,1 31,5 25,6
MS3101R12-**P 3/4-0UNEF-2A 15,8 25,0 3,0 55 19,0 24,4 19,3
MS3101R14-**P 7/8-20UNEF-2A 15,8 28,2 3,0 55 19,0 29,0 22,5
MS3101R16-**P 1 -20UNEF-2A 15,8 31,4 3,0 55 19,0 31,5 25,6
MS3101R18-**P 1-1/8-18NEF-2A 15,8 34,5 3,9 60 19,0 36,6 28,8
MS3101R20-**P 1-1/4-18NEF-2A 15,8 37,6 3,9 60 19,0 39,7 32,0
MS3101R22-**P 1-3/8-18 EF-2A 15,8 41,0 3,0 60 19,0 39,7 35,2
MS3101R24-*P 1-1/2-18NEF-2A 15,8 43,8 3,9 60 20,6 47,4 38,4
MS3101R28.**P 1-3/4-18NS-2A 15,8 50,5 3,9 67 20,6 47,4 44,8
MS3101R32-**P 2 -18NS-2A 15,8 57,0 3,9 67 22,2 55,9 51,2
MS3101R36-**P 2-1/4-16UN-2A 15,8 63,2 3,9 85 22,2 60,8 57,5
*For socket inserts substitute S for P **Add contact arrangement number (see pages 7 – 14)
Order reference A B E 1) GKL M S V W
Pin insert* Thread min. max. max. ±0,7 max. +0,4 max. max. max.
MS3101E10SL-**P 5/8-2ENEF-2A 9,5 6,5 21,8 3,0 60 14,2 16,2 22,7 27,6
MS3101E12S-**P 3/4-20UNEF-2A 9,5 6,5 25,0 3,0 60 14,2 19,3 22,7 27,0
MS3101E14S-**P 7/8-20UNEF-2A 9,5 9,0 28,2 3,0 70 14,2 22,5 27,5 34,0
MS3101E16S-**P 1 -20U EF-2A 9,5 11,0 31,4 3,0 70 14,2 25,6 30,0 38,0
MS3101E12-**P 3/4-20UNEF-2A 15,8 6,5 25,0 3,0 70 19,0 19,3 22,7 27,0
MS3101E14-**P 7/8-20UNEF-2A 15,8 9,0 28,2 3,0 70 19,0 22,5 27,5 34,0
MS3101E16-**P 1 -20UNEF-2A 15,8 11,0 31,4 3,0 70 19,0 25,6 30,0 38,0
MS3101E18-**P 1-1/8-18NEF-2A 15,8 14,2 34,5 3,9 77 19,0 28,8 32,2 40,5
MS3101E20-**P 1-1/4-18NEF-2A 15,8 15,8 37,6 3,9 77 19,0 32,0 37,5 47,5
MS3101E22-**P 1-3/8-18NEF-2A 15,8 15,8 41,0 3,9 77 19,0 35,2 37,5 47,5
MS3101E24-**P 1-1/2-18NEF-2A 15,9 21,4 43,8 3,9 77 20,6 38,4 43,3 54,0
MS3101E28-**P 1-3/4-18NS-2A 15,8 21,4 50,5 3,9 85 20,6 44,8 43,3 54,0
MS3101E32-**P 2 -18NS-2A 15,8 26,7 57,0 3,9 85 22,2 51,2 51,7 64,5
MS3101E36-**P 2-1/4-16UN-2A 15,8 31,7 63,2 3,9 105 22,2 57,5 58,0 72,0
*For socket inserts substitute S for P **Add contact arrangement number (see pages 7 – 14) 1) maximum cable diameter
Cable Connecting Plug
MS3101E/CA3101E
MS3101F
MS3101E and F are cable connecting plugs
without flange and coupling nut. MS3101E
and F mate with 3106 and 3108 plugs.
For new programs order MS3101F only.
If crimp version is required please order
CA3101E...F80 or CA3101E...183
MS
19
Order reference A B K L M P R S T
Pin insert* Thread min. ±0,7 max. +0,4 max. ±0,1 ±0,3 +0,2 / –0,2
MS3102R10SL-**P 5/8-24NEF-2A 9,5 3,0 25,1 14,2 15,9 18,2 25,4 3,1
MS3102R12S-**P 3/4-20UNEF-2A 9,5 3,0 25,1 14,2 15,9 20,6 28,0 3,1
MS3102R14S-**P 7/8-20UNEF-2A 9,5 3,0 25,1 14,2 19,0 23,0 30,0 3,1
MS3102R16S-**P 1 -20U EF-2A 9,5 3,0 25,1 14,2 22,2 24,6 32,5 3,1
MS3102R16S-**P 1 -20UNEF-2A 9,5 3,0 25,1 14,2 22,2 24,6 32,5 3,1
MS3102R12-**P 3/4-20UNEF-2A 15,8 3,0 34,6 19,0 15,9 20,6 28,0 3,1
MS3102R14-**P 7/8-20UNEF-2A 15,8 3,0 34,6 19,0 19,0 23,0 30,0 3,1
MS3102R16-**P 1 -20UNEF2A 15,8 3,0 34,6 19,0 22,2 24,6 32,5 3,1
MS3102R18-**P 1-1/8-18NEF-2A 15,8 3,9 34,6 19,0 25,4 27,0 35,0 3,1
MS3102R20-**P 1-1/4-18NEF-2A 15,8 3,9 34,6 19,0 29,0 29,4 38.0 3,1
MS3102R22-**P 1-3/8-18NEF-2A 15,8 3,9 34,6 19,0 32,2 31,8 41,0 3,1
MS3102R24-**P 1-1/2-18NEF-2A 15,8 3,9 36,2 20,6 35,3 34,9 44,5 3,7
MS3102R28-**P 1-3/4-18NS-2A 15,8 3,9 36,2 20,6 41,2 39,7 50,8 3,7
MS3102R32-**P 2 -18NS-2A 15,8 3,9 37,8 22,2 47,6 44,5 57,0 4,4
MS3102R36-**P 2-1/4-16UN-2A 15,8 3,9 37,8 22,2 52,4 49,2 63,5 4,4
*For socket inserts substitute S for P **Add contact arrangement number (see pages 7 – 14)
Order reference A E 1) LPVW
Pin insert* Thread max. max. max. max. max.
MS3106E10SL-**P 5/8-24NEF-2B 6,5 55,0 24,1 22,7 27,0
MS3106E12S-**P 3/4-20UNEF-2B 6,5 55,0 25,8 22,7 27,0
MS3106E14S-**P 7/8-20UNEF-2B 9,0 60,0 28,8 27,5 34,0
MS3106E16-**P 1 -20UNEF-2B 11,0 60,0 31,8 30,0 38,0
MS3106E12-**P 3/4-20UNEF-2B 6,5 70,0 25,6 22,7 27,0
MS3106E14-**P 7/8-20UNEF-2B 9,0 70,0 28,8 27,5 34,0
MS3106E16-**P 1 -20UNEF-2B 11,0 70,0 31,8 30,0 38,8
MS3106E18-**P 1-1/8-18NEF-2B 14,2 75,0 34,1 32,2 40,5
MS3106E20-**P 1-1/4-18NEF-2B 15,8 75,0 37,4 37,5 47,5
MS3106E22-**P 1-3/8-18NEF-2B 15,8 75,0 40,5 37,5 47,0
MS3106E24-**P 1-1/2-18NEF-2B 21,4 75,0 43,8 43,3 54,0
MS3106E28-**P 1-3/4-18NS-2B 21,4 90,0 50,2 43,3 73,0
MS3106E32-**P 2 -18NS-2B 26,7 90,0 56,4 51,7 64,5
MS3106E36-**P 2-1/4-16UN-2B 31,7 100,0 62,8 58,0 73,0
*For socket inserts substitute S for P **Add contact arrangement number (see pages 7 – 14) 1) maximum cable diameter
MS3106E / CA3106E
MS3106F / CA06R
MS3106E and F are straight plugs. They mate
with 3100 and 3102 receptacles and 3101
plugs.
Note:
MS3106E corresponds to MS3106F, how-
ever, MS3106F has an O ring seal. For new
programs order MS3101F only.
If crimp version is required please order CA3106E...F80 (without O ring),
CA3106E...F183 (without O ring) or CA06R...F183 (with O ring).
MS3102E MS3102R CA3102E
MS3102E and R are box mounting receptacles with
square flange and mate with 3106 and 3108 plugs.
Dimension X max for pin or socket (solder contacts only)
Shell size Contact size
16 12 8 4 0
10SL 13,6 - - - -
12S, 14S,16S 13,2 - - - -
12 17,9 17,9 - - -
14 17,9 17,9 19,5 - -
16 17,9 17,9 19,5 19,5 -
18 17,1 17,1 18,7 18,7 -
20, 22 17,1 17,1 18,7 18,7 24,7
24, 28 15,5 15,5 17,1 17,1 23,1
32, 36 13,9 13,9 15,5 15,5 21,5
Box Mounting Receptacle / Straight Plug
Note: For new programs order MS3102R only. If crimp version is required
please order CA3102R...F80 or CA3102R...F183.
20
MS
Dimensions are mm
Subject to changes
Order reference A E 1) PRVY
Pin insert* Thread max. max. max. max. max.
MS3108R10SL-**P 5/8-25NEF-2B 6,5 24,1 22,7 42,0 45,0
MS3108R12S-**P 3/4-20UNEF-2B 6,5 25,8 22,7 42,0 45,0
MS3108R14S-**P 7/8-20UNEF-2B 9,0 28,8 27,5 42,0 47,0
MS3108R16S-**R 1 -20UNEF-2B 11,0 31,8 30,0 45,0 48,0
MS3108R12-**P 3/4-20UNEF-2B 6,5 25,8 22,7 54,0 54,0
MS3108R14-**P 7/8-20UNEF-2B 9,0 28,8 27,5 35,7 55,0
MS3108R16-**P 1 -20UNEF-2B 11,0 31,8 30,0 45,0 57,0
MS3108R18-**P 1-1/8-18NEF-2B 14,2 34,1 32,2 53,0 58,0
MS3108R20-**P 1-1/4-18NEF-2B 15,8 37,4 37,5 53,0 61,0
MS3108R22-**P 1-3/8-18NEF-2B 15,8 40,5 37,5 53,0 61,0
MS3108R24-**P 1-1/2-18NEF-2B 21,4 43,8 43,3 58,0 66,0
MS3108R28-**P 1-3/4-18NS-2B 21,4 50,2 43,3 58,0 66,0
MS3108R32-**P 2 -18NS-2B 26,7 56,4 51,7 66,0 72,0
MS3108R36-**P 2-1/4-16UN-2B 31,7 62,8 58,0 69,0 75,0
*For socket inserts substitute S for P **Add contact arrangement number (see pages 7 – 14) 1) maximum cable diameter
MS3108E / CA3108E
MS3108R / CA3108R
MS3108R 90° right angle plugs mate with
3100 and 3102 receptacles and 3101 plugs.
The 3108R has an O ring seal under the
coupling nut. If no O ring is required the order
reference is MS3108E.
Note: MS3108R is without cable clamp. If it
is required with cable clamp please order the
clamp separately.
If crimp version is required please order CA3108E...F80 (without O ring),
CA3108E...F183 (without O ring) or CA3108R...F80 (with O ring),
CA3108R...F183 (with O ring)
Order reference A L M P
Pin insert* Thread max. max. max.
MS3106R10SL-**P 5/8-24NEF-2B 40,0 24,4 24,1
MS3106R12S-**P 3/4-20UNEF-2B 40,0 24,4 25,8
MS3106R14S-**P 7/8-20UNEF-2B 45,0 29.0 28,8
MS3106R16S-**R 1 -20UNEF-2B 45,0 31,5 31,8
MS3106R12-**P 3/4-20U EF-2B 55,0 24,4 25,8
MS3106R14-**P 7/820UNEF2B 55,0 29,0 28,8
MS3106R16-**P 1 -20UNEF-2B 55,0 31,5 31,8
MS3106R18-**P 1-1/8-18NEF-2B 60,0 36,5 34,1
MS3106R20-**P 1-1/4-18 EF-2B 60,0 39,7 37,4
MS3106R22-**P 1-3/8-18NEF-2B 60,0 39,7 40,5
MS3106R24-**P 1-1/2-18 EF-28 60,0 47,4 43,6
MS3106R28-**P 1-3/4-18NS-2B 70,0 47,4 50,2
MS3106R32-**P 2 -18NS-2B 70,0 55,9 56,4
MS3106R36-**P 2-1/4-16UN-2B 90,0 60,8 62,8
*For socket inserts substitute S for P **Add contact arrangement number (see pages 7 – 14)
MS3106R / CA3106R
The MS3106R straight plug has a shorter
lightweight endbell than MS3106E and F. It
contains an O ring seal under the coupling
nut. MS3106R plugs mate with 3100 and
3102 receptacles and 3101 plugs.
If crimp version is required please order
CA3106R...F80 or CA3106R...183
Straight Plug / 90° Plug
MS
21
Order reference A C B G H J K L M S
Pin insert* Thread Thread min. max. min. min. ±0,7 max. +0,4 max.
CA3101F10SL-**P 5/8-24NEF-2A 5/8-24NEF-2A 9,5 16,2 9,5 8,2 3,0 45,0 14,2 21,8
CA3101F12S-**P 3/4-20UNEF-2A 5/8-24NEF-2A 9,5 19,3 9,5 8,2 3,0 45,0 14,2 25,0
CA3101F14S-**P 7/8-20UNEF-2A 3/4-20UNEF-2A 9,5 22,5 9,5 11,1 3,0 45,0 14,2 28,2
CA3101F16S-**P 1 -20UNEF-2A 7/8-20UNEF-2A 9,5 25,6 9,5 14,3 3,0 45,0 14,2 31,4
CA3101F12-**P 3/4-20UNEF-2A 5/8-24NEF-2A 15,8 19,3 9,5 8,2 3,0 57,0 19,0 25,0
CA3101F14-**P 7/8-20UNEF-2A 3/4-20UNEF-2A 15,8 22,5 9,5 11,1 3,0 57,0 19,0 29,2
CA3101F16-**P 1 -20UNEF-2A 7/8-20UNEF-2A 15,8 25,6 9,5 14,3 3,0 57,0 19,0 31,4
CA3101F18-**P 1-1/8-18 EF-2A 1 -20UNEF-2A 15,8 28,8 9,5 16,7 3,9 57,0 19,0 34,5
CA3101F20-**P 1-1/4-18NEF-2A 1-3/16-18NEF-2A 15,8 32,0 9,5 19,8 3,9 57,0 19,0 37,6
CA3101F22-**P 1-3/8-18NEF-2A 1-3/16-18NEF-2A 15,8 35,2 9,5 19,8 3,9 57,0 19,0 41,0
CA3101F24-**P 1-1/2-18NEF-2A 1-7/16-18NEF-2A 15,8 38,4 9,5 25,4 3,9 57,0 20,6 43,8
CA3101F28-**P 1-3/4-18NS-2A 1-7/16-18NEF-2A 15,8 44,8 9,5 27,0 3,9 62,0 20,6 50,5
CA3101F32-**P 2 -18NS-2A 1-3/4-18NS-2A 15,8 51,2 11,0 32,5 3,9 62,0 22,2 57,9
CA3101F36-**P 2-1/4-16UN-2A 2 -18NS-2A 15,8 57,5 11,8 35,7 3,9 62,0 22,2 53,2
*For socket inserts substitute S for P **Add contact arrangement number (see pages 7 – 14)
CA3101F
CA3101F is a cable connecting plug with
threaded endbell. Crimp and solder versions
are available (please indicate ...F80 or
...F183). CA3101F mate with 3106 and 3108
shell styles.
Order reference A C E F H J
Pin insert* Thread Thread max. max. min. min.
CA3106F10SL-**P 5/8-243 EF-2B 5/8-24 EF-2A 50,0 24,1 9,5 8,2
CA3106F12S-**P 3/4-20UNEF-2B 5/8-24NEF2A 50,0 25,8 9,5 8,2
CA3106lF14S-**P 7/8-20UNEF-2B 3/4-20UNEF 50,0 28,8 9,5 11,1
CA3106F16S-**P 1 -20UNEF-2B 7/8-20UNEF-2A 50,0 31,8 9,5 14,3
CA3106F12-**P 3/4-20UNEF-2B 5/8-24NEF-2A 60,0 25,8 9,5 8,2
CA3106F14-**P 7/8-20UNEF-2B 3/4-20UNEF-2A 60,0 28,8 9,5 11,1
CA3106F16-**P 1 -20UNEF-2B 7/8-20UNEF-2A 60,0 31,8 9,5 14,3
CA3106F18-**P 1-1/8-18NEF2B 1 -20UNEF-2A 60,0 34,1 9,5 16,7
CA3106F20-**P 1-1/4-18NEF-2B 1-3/16-18NEF-2A 60,0 37,4 9,5 19,8
CA3106F22-**P 1-3/8-18NEF-2B 1-3/16-18NEF-2A 60,0 40,5 9,5 19,8
CA31.06F24-**P 1-1/2-18NEF-2B 1-7/16-18NEF-2A 65,0 43,8 9,5 25,4
CA3106F28-**P 1-3/4-18NS-2B 1-7/16-18NEF-2A 65,0 50,2 9,5 27,0
CA3106F32-**P 2 -18NS-2B 1-3/4-18NS-2A 65,0 56,4 11,0 32,5
CA3106F36-**P 2-1/4-16UN-2B 2 -18NS-2A 80,0 62,8 11,8 35,7
*For socket inserts substitute S for P **Add contact arrangement number (see pages 7 – 14)
CA3106F
CA3106F is a straight plug with external
thread, however, without cable clamp and O
ring seal. Crimp and solder versions are
available (please indicate ...F80 or ...F183).
CA3106F mate with 3100, 3101 and 3102
shell styles.
Straight Plug - F Type
22
MS
Dimensions are mm
Subject to changes
Order reference A B L M R S T
Pin / Socket insert Thread min. max. +0,4 ±0,1 ±0,3 +0,2 / –0,1
TBF10SL-**PS 5/8-24NEF-2A 9,5 40,1 14,2 18,2 25,4 3,1
TBF12S-**PS 3/4-20UNEF-2A 9,5 40,1 14,2 20,6 28,0 3,1
TBF14S-**PS 7/8-20UNEF-2A 9,5 40,1 14,2 23,0 30,0 3,1
TBF16S-**PS 1 -20UNEF-2A 9,5 40,1 14,2 24,6 32,5 3,1
TBF12-**PS 3/4-20UNEF-2A 15,8 54,4 19,0 20,6 28,0 3,1
TBF14-**PS 7/8-20UNEF-2A 15,8 54,4 19,0 23,0 30,0 3,1
TBF16-**PS 1 -20UNEF-2A 15,8 54,4 19,0 24,6 32,5 3,1
TBF18-**PS 1-1/8-18NEF-2A 15,8 54,5 19,0 27,0 35,0 3,1
TBF20-**PS 1-1/4-18NEF-2A 15,8 54,5 19,0 29,4 38,0 3,1
TBF22-**PS 1-3/8-18NEF-2A 15,8 54,5 19,0 31,8 41,0 3,1
TBF24-**PS 1-1/2-18NEF-2A 15,8 54,5 20,5 34,9 44,5 3,7
TBF28-**PS 1-3/4-18NS-2A 15,8 54,5 20,6 39,7 50,8 3,7
TBF32-**PS 2 -18NS-2A 15,8 54,5 22,2 44,5 57,0 4,4
TBF36-**PS 2-1/4-16UN-2A 15,8 54,5 22,2 49,2 63,5 4,4
*For socket inserts substitute S for P **Add contact arrangement number (see pages 7 – 14)
TBF
TBF is a through-bulkhead which mates with
3106 and 3108 plugs.
Order reference A B C D E F L P
Pin insert* Thread min. max. ±0,2 ±0,2 ±0,5 max. max.
CA3106E10SL--**-P-DN 5/8-24NEF-2B 7,7 13,2 15,5 17,0 11,7 11,7 50,0
CA3105E12S-**-P-DN 3/4-20UNEF-2B 7,9 13,2 15,5 17,8 11.8 5ß.ß25,6
CA3106E14S-**-P-DN 7/8-20UNEF-2B 10,6 17,0 19,1 19,1 11,7 50,0 28,6
CA3106E16S-**-P-DN 1 -20UNEF-2B 13,5 21,9 23,9 23,9 11,5 50,0 31,8
CA3106E12-**-P-DN 3/4-20UNEF-2B 7,9 13,2 15,5 17,8 11,7 50,0 25,6
CA3106E14-**-P-DN 7/8-20UNEF-2B 10,6 17,0 19,1 20,1 11,7 60,0 28,6
CA3106E16-**-P-DN 1 -20UNEF-2B 13,5 21,9 23,9 23,5 11,5 60,0 31,8
CA3106E18-**-P-DN 1-1/8-18NEF-2B 14,6 21,9 23,9 26,5 12,7 60,0 34,1
CA3106E20-**-P-DN 1-1/4-18NEF-2B 18,5 26,6 29,6 30,2 12,7 65,0 37,3
CA3106E22-**-P-DN 1-3/8-18NEF-2B 20,8 26,2 29,6 33,6 12,7 65,0 40,5
CA3106E24-**-P-DN 1-1/2-16NEF-2B 24,6 34,5 37,8 36,1 12,7 65,0 43,8
CA3106E28-**-P-DN 1-3/4-18NS-2B 27,0 34,5 37,8 41,4 12,7 65,0 50,0
CA3106E32-**-P-DN 2 -18NS-2B 33,3 43,6 47,8 48,6 15,2 70,0 56,3
CA3106E36-**-P-DN 2-1/4-16UN-2B 38,5 43,6 47,8 54,8 15,2 80,0 62,7
*For socket inserts substitute S for P **Add contact arrangement number (see pages 7 – 14)
CA3106E-DN
CA3106E-DN is a straight plug with endbell
for shrink boot adapters. Crimp and solder
versions are available (please indicate ...F80
or ...F183). CA3106-DN mate with 3100,
3101 and 3102 shell styles.
Straight Plug with Shrink Boot Adapter / Through-Bulkhead
MS
23
Order reference Shell size C L R S
max. max. –0,3 –0,3
812-8552-000 10SL, 12, 12S 10,0 70,4 6,7 8,1
012-8554-000 14, 14S 12,8 67,4 9,2 11,0
012-0218-000 16, 16S 18,9 63,9 11,2 14,2
012-0219-000 18 22,1 60,6 14,4 15,8
012-0220-000 20, 22 27,0 57,4 16,0 18,9
012-8555-000 24, 28 27,0 57,4 16,78 21,3
012-8556-000 24, 28 33,5 54,4 21,6 23,7
012-8557-000 32 33,05 54,4 21,6 26,6
012-8558-000 32 40,5 51,4 26,9 31,6
012-8556-000 36 40,5 51,4 26,9 31,6
012-0223-000 36 47,0 48,4 31,9 34,8
Telescoping Bushing
Telescoping gland bushings (used with
cable clamp MS3057A) keep dirt, oil and
moisture out of endbell. Taping or wrapp-
ing wires is eliminated since bushing pro-
tects wires going through clamp. Combina-
tions of bushings may be used to decrease
cable entry diameter to improve sealing.
Material is polychloroprene (MS).
Order reference Shell size A B E L R Shell weight
Thread max. max. max. max. gr
MS3057-4A 10S, 12S, 12 5/8-24NEF-2B 10,5 7,9 20,8 22,5 13,2
MS3057-6A 14S, 14 3/4-20UNEF-2B 10,5 11,1 22,4 27,4 18,6
MS3057-8A 16S, 16 7/8-20UNEF-2B 10,5 14,2 24,0 29,8 23,6
MS3057-10A 18 1 -20UNEF-2B 10,5 15,8 24,0 32,2 27,3
MS3057-12A 20, 22 1-3/16-18NEF-2B 10,5 19,0 24,0 37,4 37,2
MS3057-16A 24, 26 1-7/16-18NEF-2B 10,5 23,7 26,4 43,5 56,3
MS3057-20A 32 1-3/4-18NS-2B 12,0 31,8 28,0 51,7 83,9
MS3057-24A 36 2 -18NS-2B 13,7 34,6 29,6 57,8 109,8
Cable Clamp with Bushing
Cable clamps are available with or without
bushing. To order bushings, add “with bus-
hing“ to the part number.
For example:
MS3057-10A with bushing.
Accessories
24
MS
Dimensions are mm
Subject to changes
Plastic protective caps
Material: Polyethylene
Colour: Red
Order reference MS3100 / 3101 / 3102 MS3106 / 3108 A B C D
max. max. ±0,2 max.
025-0460-000 10SL 21,5 17,8 15,2 16,9
025-0477-000 10 SL 20,4 12,5 14,0 15,7
025-0478-000 12S, 12 23,1 14,6 16,8 18,5
025-0462-000 12S, 12 24,7 17,8 18,5 20,2
025-0479-000 14S, 14 26,3 14,6 19,9 21,6
025-0463-000 14S, 14 27,8 17,8 21,6 23,3
025-0480-000 16S, 16 29,5 14,6 23,1 24,8
025-0498-000 16S, 16 31,5 17,8 25,1 26,8
025-0484-000 18 32,8 14,6 25,9 27,8
025-0507-000 18 34,7 17,8 28,2 30,1
025-0467-000 20 35,4 17,8 28,3 30,2
025-0468-000 20 38,1 17,8 31,8 33,4
025-0469-000 22 39,1 14,6 32,6 34,2
025-0486-000 22 41,4 17,8 34,5 36,5
025-0487-000 24 42,3 14,6 35,5 37,4
025-0510-000 24 44,2 17,8 37,8 39,8
025-0488-000 28 48,4 14,6 41,6 43,5
025-0501-000 28 50,4 17,8 43,9 45,9
025-0489-000 32 54,8 14,6 48,0 49,9
025-0502-000 32 57,0 17,8 50,3 52,2
025-0490-000 36 61,3 14,6 54,2 56,3
025-0503-000 36 63,4 17,8 56,6 58,6
Dust caps for mating side of plugs only.
Accessories
Wire hole fillers
Where contacts are not used, the contact cavities are to be closed with wire hole filers
Contact size Wire size Part number Colour
AWG metric AWG
- 10 20 225-1000-000 red
16S/16 15S/15 16 225-0017-000 blue
12 25 12 225-0018-000 yellow
8 60/100 8 225-0019-000 white
4 160 4 225-8502-000 green
0 500 0 225-8503-000 black
MS
25
MS Cannon Cannon Shell A B C D E Shell weight
Order reference Order reference Order reference size Thread max. max. max. +0,2 with chain without chain
with chain with chain without chain gr. gr.
MS25043-10D CA2209-5101 CA2322-2 10SL 5/8-24NEF-2B 11,7 20,2 107,0 3,9 5,5 4,1
MS25043-12D CA2209-5102 CA2322-3 12S, 12 3/4-20UNEF-2B 11,7 23,4 120,0 3,9 7,7 5,0
MS25043-14D CA2209-5103 CA2322-4 14S, 14 7/8-20UNEF-2B 11,7 26,6 120,0 3,0 8,2 5,5
MS25043-16D CA2209-5104 CA2322-5 16S, 16 1 -20UNEF-2B 11,7 29,8 120,0 3,9 8,7 6,5
MS25043-18D CA2209-5105 CA2322-6 18 1-1/8-18NEF-2B 11,7 32,9 120,0 3,9 9,6 7,7
MS25043-20D CA2209-5106 CA2322-7 20 1-1/4-18NEF-2B 11,7 36,1 134,0 4,7 11,5 9,2
MS25043-22D CA2209-5107 CA2322-8 22 1-3/8-18NEF-2B 11,7 39,4 134,0 4,7 12,7 10,5
MS25043-24D CA2209-5108 CA2322-9 24 1-1/2-18NEF-2B 11,7 42,6 147,0 4,7 14,5 8,2
MS25043-28D CA2209-5109 CA2322-10 28 1-3/4-18NS-2B 13,3 48,9 207,0 4,7 15,0 13,2
MS25043-32D CA2209-5110 CA2322-11 32 2 -18NS-2B 13,3 55,3 207,0 5,5 26,5 21,0
MS25043-36D CA2209-5111 CA2322-12 36 2-1/4-16UN-2B 13,3 61,6 207,0 5,5 33,2 27,5
Metal protective caps
These externally threaded caps are used to
protect 3106 and 3108 plugs. The material
is aluminum alloy. The protective caps are
furnished with a sash chain. They are also
available with or without chain.
MS Cannon Cannon Shell A B H F D G Shell weight
Order reference Order reference Order reference size Thread min. +0,2 max. max. max. with chain without chain
with chain with chain without chain gr. gr.
MS25042-10D CA17530-5101 CA19741-10 10SL 5/8-24NEF-2A 7,7 3,9 16,7 16,3 107,0 6,4 3,2
MS25042-12D CA17530-5102 CA19741-12 12S, 12 3/4-20U EF-2A 12,5 3,9 19,8 21,0 120,0 8,7 4,2
MS25042-14D CA17530-5103 CA19741-14 14S, 14 7/8-20UNEF-2A 12,5 4,9 23,0 21,0 120,0 9,2 5,5
MS25042-16D CA17530-5104 CA19741-16 16S, 16 1 -20UNEF-2A 12,5 3,9 26,2 21,0 120,0 10,0 6,0
MS25042-18D CA17530-51005 CA19741-18 18 1-1/8-18NEF-2A 12,5 3,9 21,0 29,4 120,0 13,2 9,2
MS25042-20D CA17530-5106 CA19741-20 20 1-1/4-18NEF-2A 12,5 4,7 32,5 21,0 124,0 15,5 12,0
MS25042-20D CA17530.5106 CA19741-20 20 1-1/4-18NEF-2A 12,5 4,7 32,5 21,0 134,0 15,5 12,0
MS25042-22D CA17530-5107 CA19741-22 22 1-3/8-18NEF-2A 12,5 4,7 35,7 21,0 134,0 16,5 13,3
MS25042-24D CA17530-5108 CA19741-24 24 1-1/2-18NEF-2A 12,5 4,7 38,9 21,0 147,0 19,2 14,5
MS25042-28D CA17530-5109 CA19741-28 28 1-3/4-18NS-2A 12,5 4,7 45,2 21,0 207.0 25,5 21,0
MS24042-32S CA17530-5110 CA19741-32 32 2 -18NS-2A 12,5 5,5 51,6 21,0 207,0 31,0 28,0
MS25042-36D CA17530-5111 CA19741-36 36 2-1/4-16UN-2A 12,5 5,5 57,9 21,0 207,0 36,05 33,0
Metal protective caps
These internally threaded caps are used to
protect 3100, 3101 and 3102 receptacless.
The material is aluminum alloy. The protec-
tive caps are furnished with or without a sash
chain.
Accessories
26
MS
Dimensions are mm
Subject to changes
Order reference MS Shell size A B C D
±0,1 ±0,3 ±0,2 +0,2
075-8512-000 10SL 25,4 18,2 15,7 4,2
075-8513-000 12S, 12 28,0 20,6 18,9 4,2
075-8514-000 14S, 14 30,0 23,0 22,1 3,2
075-8515-000 16S, 16 32,5 24,6 25,3 4,2
075-8516-000 18 35,0 27,0 28,4 4,2
075-8517-000 20 38,0 29,4 31,6 4,2
075-8518-000 22 41,0 31,8 34,8 4,2
075-8519-000 24 44,5 34,9 38,0 4,2
075-8520-000 28 50,8 39,7 44,3 5,2
075-8521-000 32 57,0 44,5 50,7 5,2
075-8522-000 36 64,5 49,2 57,0 5,2
Order reference for A K L N ÆR S T Weight
MS shell size Thread max. max. max. ±0,1 ±0,7 +0,2 gr.
–0,1
MS3105-10S 10SL 5/8-24NEF-2A 2,4 17,2 11,9 18,2 25,4 3,1 5,9
MS3105-12S 12S 3/4-20UNEF-2A 2,4 17,2 14,7 20,6 28,7 3,1 64,
MS3105-14S 14S 7/8-20UNEF-2A 2,4 17,9 17,9 23,0 30,1 3,1 7,7
MS3105-16S 16S 1 -20UNEF-2A 2,4 17,2 21,0 24,6 32,5 3,1 9,1
MS3105-12 12 3/3-20UNEF-2A 2,4 22,0 14,7 20,6 28,7 3,1 7,3
MS31,05-14 14 7/8-20UNEF 2,4 22,0 17,9 23,0 30,0 3,1 9,1
MS3105-16- 16 1 -20UNEF-2A 2,4 22,0 21,0 24,6 32,5 3,1 10,0
MS3105-18 18 1-1/8-18UNEF-2A 3,0 22,5 24,2 27,0 34,9 3,1 14,1
MS3105-20 20 1-1/4-18UNEF-2A 3,0 22,5 27,4 29,4 38,0 3,1 15,0
MS3105-22 22 1-3/8-18UNEF-2A 3,0 22,5 30,6 31,8 41,3 3,1 16,8
MS3105-24 24 1-1/2-18UNEF-2A 3,0 24,1 33,7 34,9 44,4 3,7 21,8
MS3105-28 28 1-3/4-18UNS-2A 3,0 24,1 39,3 39,7 50,8 3,7 25,4
MS3105-32 32 2 -18UNS-2A 4,3 27,0 45,7 44,5 57,1 4,4 37,2
MS3105-36 36 2-1/4-16UN-2A 4,3 27,0 51,2 49,2 63,4 4,4 44,9
Dummy Receptacle MS3105
The dummy receptacle holds 3106 or 3108
plugs when not in use.
Material: Aluminum alloy, finish is olive drab
chromate over cadmium plate.
Accessories
Sealing Gaskets
These sealing gaskets made of neoprene
are used with flanged receptacles for
sealing between the shell and the flange.
MS
27
Contact Termination size Cannon Part number d1 d4 d6 d7 l1 l3
size mm2AWG with finish +0,05 ± 0,15 ± 0,5
A36 A176
10/20 0,50 - 1,0 20/18 030-8585-006 030-8585-006 1,04 1,5-0,05 1,5+0,05 2,4-0,05 28,4 4,75
0,2 - 0,4 24/22 030-8585-010 - 1,04 1,5-0,05 1,5+0,05 2,4-0,05 28,4 4,75
15S/16S 0,75 - 1,5 18 / 16 030-8586-000 030-8586-006 1,6 1,75-0,1 1,75+0,08 2,75-0,05 27,4 3,85
0,3 - 0,6 22 / 20 030-8744-000 030-8744-006 1,6 1,75-0,1 1,2+0,1 2,75-0,05 27,4 3,85
0,14 - 0,38 22 / 26 030-8586-010 - 1,6 1,75-0,1 0,9+0,05 2,75-0,05 27,4 3,85
15/16 0,75 - 1,5 18 / 16 030-8587-000 030-8587-006 1,6 1,75-0,1 1,75+0,08 2,75-0,05 31,4 7,9
0,3 - 0,6 22 / 20 030-8659-000 030-8659-006 1,6 1,75-0,1 1,2+0,1 2,75-0,05 31,4 7,9
0,14 - 0,38 22 / 26 030-8587-030 030-8687-036 1,6 1,75-0,1 0,9+0,05 2,75-0,05 31,4 7,9
25/12 2,0 - 3,0 14 / 12 030-8588-000 030-8588-006 2,4 3,3-0,15 2,5+0,1 3,8-0,1 37,0 7,9
0,75 - 1, 5 18 / 16 030-8588-010 030-8588-016 2,4 3,3-0,15 1,75+0,08 3,8-0,1 37,0 7,9
4,0 - 030-8588-054 - 2,4 3,3-0,15 2,8+0,1 3,8-0,1 37,0 7,9
330-8588-000 030-8588-006 2,4 3,3-0,15 2,5+0,1 3,8-0,1 37,0 7,9
100/60/8 - 8 030-8612-000 030-8612-006 3,6 6,25-0,15 4,55+0,1 6,8-0,1 39,6 6,35
6,0 10 030-8589-000 030-8589-006 3,6 6,25-0,15 3,5+0,1 6,8-0,1 39,6 6,35
10,0 - 030-8590-000 030-8590-006 3,6 6,25-0,15 4,8+0,1 6,8-0,1 39,6 6,35
2,0 - 3,0 14 / 12 030-8612-010 - 3,6 6,25-0,15 2,5+0,05 6,8-0,1 39,6 6,35
4,0 - 030-8612-020 - 3,6 6,25-0,15 2,8+0,1 6,8-0,1 39,6 6,35
160/4 - 4 030-8613-000 030-8613-006 5,75 9,55-0,15 7,10+0,15 9,55-0,1 39,6 6,35
16,00 - 030-8591-000 030-8591-006 5,75 9,55-0,15 6,20+0,15 9,55-0,1 39,6 6,35
10,00 - 030-8591-020 - 5,75 9,55-0,15 4,80+0,15 9,55-0,1 39,6 6,35
- 6 030-8613-010 - 5,75 9,55-0,15 5,70+0,15 9,55-0,1 39,6 6,35
500/0 - 0 030-8614-000 030-8614-006 9,10 13,55-0,15 11,5+0,15 14,35-0,1 41,0 6,35
50,00 - 030-8592-000 030-8592-006 9,10 13,55-0,15 10,7+0,15 14,35-0,1 41,0 6,35
25,00 4 030-8614-010 - 9,10 13,55-0,15 7,6+0,15 14,35-0,1 41,0 6,35
35,00 2 030-8614-020 - 9,10 13,55-0,15 9,1+0,15 14,35-0,1 41,0 6,35
16,00 - 030-8614-030 - 9,10 13,55-0,15 6,2+0,15 14,35-0,1 41,0 6,35
Pin Contacts
Dimensions are mm
Contacts
Standard contacts and contacts with reduced
termination size
Finish:
A36 - 5 µm silver plated (Standard)
Size 15S/16S, 15/16, 25/12, 60/100/8, 160/4, 500/0 Size 10/20
28
MS
Dimensions are mm
Subject to changes
Contact Termination size Cannon Part number d1 d2 d3 d5 d6 l1 l2
size mm2AWG with finish +0,05 ± 0,2 ± 0,1
A36 A176
10/20 0,5 - 1,0 20/18 031-8584-000 031-8584-006 2,0-0,1 1,07 1,5+0,05 1,5+0,05 2,4-0,05 36,8± 0,3 4,75
0,2 - 0,4 24/22 031-8584-010 - 2,0-0,1 1,07 1,5+0,05 0,9+0,05 2,4-0,05 36,8± 0,3 4,75
15S/16S 0,75 - 1,5 18 / 16 031-8555-110 031-8555-115 3,2-0,15 1,65 1,75-0,1 1,75+0,08 2,75-0,05 29,1 3,9
0,3 - 0,6 22 / 20 031-8688-110 031-8688-115 3,2-0,15 1,65 1,75-0,1 1,2+0,1 2,75-0,05 29,1 3,9
0,14 - 0,38 22 / 26 031-8555-010 - 3,2-0,15 1,65 1,75-0,1 0,9+0,05 2,75-0,05 29,1 3,9
15/16 0,75 - 1,5 18 / 16 031-8556-110 031-8556-115 3,2-0,15 1,65 1,75-0,1 1,75+0,08 2,75-0,05 37,8 7,9
0,3 - 0,6 22 / 20 031-8639-120 031-8639-115 3,2-0,15 1,65 1,75-0,1 1,2+0,1 2,75-0,05 37,8 7,9
0,14 - 0,38 22 / 26 031-8556-130 - 3,2-0,15 1,65 1,75-0,1 0,9+0,05 2,75-0,05 37,8 7,9
25/12 2,0 - 3,0 14 / 12 031-8557-000 031-8557-006 4,8-0,1 2,45 3,3-0,1 2,5+0,1 3,8-0,1 37,0 7,9
0,75 - 1, 5 18 / 16 031-8557-020 031-8557-026 4,8-0,1 2,45 3,3-0,1 1,75+0,08 3,8-0,1 37,0 7,9
4,0 - 031-8557-010 - 4,8-0,1 2,45 3,3-0,1 2,8+0,1 3,8-0,1 37,0 7,9
0,3 - 0,6 22 / 20 031-8557-040 - 4,8-0,1 2,45 3,3-0,1 1,2+0,1 3,8-0,1 37,0 7,9
100/60/8 031-8519-000 031-8519-006 6,5-0,2 3,65 6,25-0,2 4,55+0,1 6,8-0,1 40,1 6,35
6,0 10 031-8558-000 031-8558-006 6,5-0,2 3,65 6,25-0,2 3,5+0,1 6,8-0,1 40,1 6,35
10,0 - 031-8559-000 031-8559-006 6,5-0,2 3,65 6,25-0,2 4,8+0,1 6,8-0,1 40,1 6,35
2,0 - 3,0 14 / 12 31-8519-010 - 6,5-0,2 3,65 6,25-0,2 2,5+0,05 6,8-0,1 40,1 6,35
160/4 - 4 030-8520-000 031-8520-006 8,6-0,2 5,8 9,55-0,2 7,1+0,15 9,55-0,1 40,10 6,35
16,00 - 031-8560-000 031-8560-006 8,6-0,2 5,8 9,55-0,2 6,2+0,15 9,55-0,1 40,10 6,35
10,00 - 031-8560-020 - 8,6-0,2 5,8 9,55-0,2 4,8+0,15 9,55-0,1 40,10 6,35
- 6 031-8520-010 - 8,6-0,2 5,8 9,55-0,2 5,7+0,15 9,55-0,1 40,10 6,35
500/0 - 0 031-8521-000 031-8521-006 13,2-0,2 9,15 13,55-0,2 11,5+0,15 14,35-0,1 41,6 6,35
50,00 - 031-8561-000 - 13,2-0,2 9,15 13,55-0,2 10,7+0,15 14,35-0,1 41,6 6,35
25,00 4 031-8521-010 - 13,2-0,2 9,15 13,55-0,2 7,6+0,15 14,35-0,1 41,6 6,35
35,00 2 031-8561-020 - 13,2-0,2 9,15 13,55-0,2 9,1+0,15 14,35-0,1 41,6 6,35
16,00 - 031-8521-030 - 13,2-0,2 9,15 13,55-0,2 6,2+0,15 14,35-0,1 41,6 6,35
Contacts
Standard contacts and contacts with reduced
termination size
Finish:
A36 - 5 µm silver plated (Standard)
Socket contacts
Dimensions are mm
Size 15S/16S, 15/16 Size 60/100/160/500, 8/4/0
MS
29
Extraction tools
for contact extraction from insulator
Part No. Order reference Contact size
CET-F80-16 121 086-0081 15S/15/10
CET-F80-12 121 086-0080 25
CET-8 121086-0079 8/100
CET-4 121086-0078 4/160
CET-0 121086-0077 0/500
for pin contacts acc to VG95234 and Cannon contacts with reduced termination size
Contact Wire size Hand crimp tools Pneumatic crimp tools
size mm2AWG Type Crimp locator Standard model Crimp locator Universal model Crimp locator
10/20 10 – 28 – 14 600 098 600 325
15S/16S 0,2 – 1,0 16 – 22 M22520-1-01 600 082
(Order reference TH 452 612 871* 612 141* TH 452
15/16 0,2 – 1,0 16 – 22 995-0001-585) 604 092
25/12 0,2 – 1,0 12 – 18 600 099
Hydraulic basic tool: Hydraulic pumps: Crimp locators
100/60/8 10 – 28 – 14 - Crimp head 463200000.601 - Hand pump 4601.00000.330 317-8531-000
- High pressure hose, 2 m, 4604.0000.020 - Foot pedal 4601.510000.330 317-8531-001
160/4 10 – 16 4 – 6 - Electric pump, foot operated, 4609.00000.020 317-8532-000
317-8532-001
500/0 14 – 50 0 – 4 317-8533-000
317-8533-001
* bench mount with foot pedal 611 380
Tooling
for socket contacts acc to VG95234 and Cannon contacts with reduced termination size
Contact Wire size Hand crimp tools Pneumatic crimp tools
size mm2AWG Type Crimp locator Standard model Crimp locator Universal model Crimp locator
10/20 0,2 – 1,0 18 – 24 600 098 600 325
15S/16S 0,2 – 1,0 16 – 22 M22520-1-01 600 083
(Order reference TH 452 612 871* 612 141* TH 452
15/16 0,2 – 1,0 16 – 22 995-0001-585) 600 081
25/12 0,2 – 1,0 12 – 18 600 099
Hydraulic basic tool: Hydraulic pumps: Crimp locators
100/60/8 2 – 10 8 – 14 - Crimp head 463200000.601 - Hand pump 4601.00000.330 317-8531-000
- High pressure hose, 2 m, 4604.0000.020 - Foot pedal 4601.510000.330 317-8531-001
160/4 10 – 16 4 – 6 - Electric pump, foot operated, 4609.00000.020 317-8532-000
317-8532-001
500/0 14 – 50 0 – 4 317-8533-000
317-8533-001
* bench mount with foot pedal 611 380
Insertion tools
for contact insertion into insulator
Part No. Order reference Contact size
CIT-F80-16 or 121 086-0097 or
CIT-16 121 086-3008 15S/15
CIT-F80-12 or 121 086-0096 or
CIT-12 121 086-3007 25
CIT-F80-20 121086-0098 10
CIT-8 121086-0095 8/100
CIT-4 121086-0094 4/160
CIT-0 121086-0093 0/500
Crimp contacts
Connectors of series MS-E and MS-R are also
available with crimp contacts for metric wire
sizes. In order to wire, insert and extract these
contacts the tools mentioned on this page are
needed. All tools have to be ordered separately.
Ask for our detailed
Wiring and Assembly
Instruction.
30
MS
Dimensions are mm
Subject to changes
Product Safety Information
THIS NOTE SHOULD BE READ IN CONJUNCTION
WITH THE PRODUCT DATA SHEET/CATALOGUE.
FAILURE TO OBSERVE THE ADVICE IN THIS INFOR-
MATION SHEET AND THE OPERATING CONDITIONS
SPECIFIED IN THE PRODUCT DATA SHEET/
CATALOGUE COULD RESULT IN HAZARDOUS
SITUATIONS.
1. MATERIAL CONTENT AND PHYSICAL
FORM
Electrical connectors do not usually contain
hazardous materials. They contain conducting and
non-conducting materials and can be divided into
two groups.
a) Printed circuit types and low cost audio types
which employ all plastic insulators and casings.
b) Rugged, Fire Barrier and High Reliability types
with metal casings and either natural rubber,
synthetic rubber, plastic or glass insulating
materials.
Contact materials vary with type of connector and
also application and are usually manufactured from
either copper, copper alloys, nickel, alumel, chromel
or steel. In special applications, other alloys may
be specified.
2. FIRE CHARACTERISTICS AND ELECTRIC
SHOCK HAZARD
There is no fire hazard when the connector is
correctly wired and used within the specified
parameters. Incorrect wiring or assembly of the
connector or careless use of metal tools or
conductive fluids, or transit damage to any of the
component parts may cause electric shock or
burns. Live circuits must not be broken by sepa-
rating mated connectors as this may cause arcing,
ionisation and burning.
Heat dissipation is greater at maximum resistance
in a circuit. Hot spots may occur when resistance
is raised locally by damage, e.g. cracked or
deformed contacts, broken strands of wire. Local
overheating may also result from the use of the
incorrect application tools or from poor quality
soldering or slack screw terminals. Overheating may
occur if the ratings in the Product Data Sheet/
Catalogue are exceeded and can cause breakdown
of insulation and hence electric shock.
If heating is allowed to continue it intensifies by
further increasing the local resistance through loss
of temper of spring contacts, formation of oxide
film on contacts and wires, and leakage currents
through carbonisation of insulation and tracking
paths. Fire can then result in the presence of
combustible materials and this may release noxious
fumes. Overheating may not be visually apparent.
Burns may result from touching overheated
components.
ITT Industries, Cannon manufactures the highest quality products available in the marketplace; however these products
are intended to be used in accordance with the specifications in this catalog. Any use or application that deviates from
stated operating specifications is not recommended and may be unsafe. No information and data contained in this catalog
shall be construed to create any liability on the part of Cannon. Any new issue of this catalog shall automatically invalidate
and supersede any and all previous issues. A limited warranty applies to Cannon products. Except for obligations
assumed by Cannon under this warranty, Cannon shall not be liable for any loss, damage, cost of repairs, incidental
or consequential damages of any kind, whether or not based on express or implied warranty, contract, negligence or
strict liability arising in connection with the design, manufacture, sale, use or repair of the products. Product availability,
prices and delivery dates are exclusively subject to our respective order confirmation form; the same applies to orders
based on development samples delivered. This catalog is not to be construed as an offer. It is intended merely as an
invitation to make an offer. By this publication, Cannon does not assume responsibility or any liability for any patent
infringements or other rights of third parties which may result from its use. Reprinting this catalog is generally permitted,
indicating the source. However, Cannon's prior consent must be obtained in all cases.
Cannon is a trademark of ITT Industries, Inc
3. HANDLING
Care must be taken to avoid damage to any
component parts of electrical connectors during
installation and use. Although there are normally
no sharp edges, care must be taken when handling
certain components to avoid injury to fingers.
Electrical connectors may be damaged in transit to
the customers, and damage may result in creation
of hazards. Products should therefore be examined
prior to installation/use and rejected if found to be
damaged.
4. DISPOSAL
Incineration of certain materials may release
noxious or even toxic fumes.
5. APPLICATION
Connectors with exposed contacts should not be
selected for use on the current supply side of an
electrical circuit, because an electric shock could
result from touching exposed contacts on an
unmated connector. Voltages in excess of 30 V ac
or 42.5 V dc are potentially hazardous and care
should be taken to ensure that such voltages can
not be transmitted in any way to exposed metal parts
of the connector body. The connector and wiring
should be checked, before making live, to have no
damage to metal parts or insulators, no solder blobs,
loose strands, conducting lubricants, swarf, or any
other undesired conducting particles. Insulation
resistance should be checked to make certain that
no low resistance joints or spurious conducting path
are existing between contacts and exposed metal
parts of the connector body. Further the contact
resistance of the connectors should be measured
within the electrical circuit in order to identify high
resistances which result in excessive connector
heating.
Always use the correct application tools as specified
in the Data Sheet/Catalogue.
Do not permit untrained personnel to wire, assemble
or tramper with connectors.
For operation voltage please see appropriate national
regulations.
IMPORTANT GENERAL INFORMATION.
1. Air and creepage paths/Operating voltage
The admissible operating voltages depend on the
individual applications and the valid national and
other applicable safety regulations.
For this reason the air and creepage path data
are only reference values. Observe reduction of air
and creepage paths due to PC board and/or harness-
ing.
2. Temperature
All information given are temperature limits. The
operation temperature depends on the individual
application.
3. Other important information
Cannon continuously endeavours to improve their
products. Therefore, Cannon products may deviate
from the description, technical data and shape as
shown in this catalogue and data sheets.
4. Harnessing and Assembly Instructions
If applicable, our special harnessing and/or assem-
bly instruction has to be adhered to. This is provid-
ed at request.
Cannon Worldwide Facilities
Austria
Afrikanergasse 3
1020 Vienna
FAX: (1) 2160948 PH: (1) 2160947
Benelux
Rue Col. Bourg Str. 105A
1140 Brussels, Belgium
FAX: (02) 7269201 PH: (02) 726 75 94
NL
FAX: 31.35.691.8796 PH: 31.35.691.6855
China
No. 24, 2 Block
Taohuawu New District
Zhenjiang, Jiangsu
P.R.C.
FAX: 86 511 4428616 PH: 86 511 443 3399
Denmark
Park Allé 287 A
2605 Brøndby
FAX: 43 43 58 58 PH: 43 45 52 88
Finland
Virkatie 1
1510 Vantaa
FAX:+358 9 70039188 PH: +358 9 70039180
France
2, Ave Sablons Bouillants, B.P. 133
77109 Meaux
FAX: (1) 64 33 16 82 PH: (1) 60 24 51 51
Germany
Postfach 11 20, 71365 Weinstadt
Cannonstrasse 1, 71384 Weinstadt
FAX: (07151) 699217 P H: (07151) 699-0
Hong Kong
906 New World Office Building
West Wing, 20 Salisbury Road
Tsim Sha Tsui, Kowloon
FAX: (852) 2369-5651 PH: (852) 2732-2720
Italy
Via Panzeri 10
20123 Milano
FAX: (02) 8372036 PH: (02) 581801
Japan
5362-1, 5-chome, Hibarigaoka
Zama-shi, Kanagawa 228
FAX: 0462-57-1680 PH: 0462-57-2010
Korea
620, Changkang Bldg.
#22, Dohwa-dong, Mapo-ku
Seoul
FAX: (02) 717 7330 PH: (02) 702 7111
Spain
Parque Empresarial San Fernando
Edificio Italia 1
a
Planta
28830 Madrid
FAX: (34) 91 656 15 83 PH: (34) 91 656 03 11
Sweden
Norr Mälarstrand 64
Jaktvarvet 1
11235 Stockholm
FAX: (46) 8 650 0072 PH: (46) 8 650 0071
Switzerland
Herzogenmühle 18
8304 Wallisellen
FAX: (01) 830-3104 PH: (01) 830-3888, 830-3613
United Kingdom
Jays Close, Viables Estate
Basingstoke Hampshire RG22 4BA
FAX: (01256) 323356 PH: (01256) 311200
United States
666 E. Dyer Road
Santa Ana, CA 92705-5612
FAX: 714.628.2142 PH: 714.557.4700
© 2000 ITT Industries, Cannon. Printed in Germany. All Rights Reserved.
INTERNET
http://www.ittcannon.com
