NOT RECOMMENDED FOR NEW DESIGN NO ALTERNATE PART MBR1040CT MBR1060CT-I Green 10A SCHOTTKY BARRIER RECTIFIER Product Summary Features and Benefits MBR1040CT - MBR1045CT (Per Leg) VRRM (V) IO (A) VF (MAX) (V) @ +25C IR (MAX) (mA) @ +25C 40 , 45 5 0.65 0.1 MBR1060CT-I (Per Leg) VRRM (V) IO (A) VF (MAX) (V) @ +25C IR (MAX) (mA) @ +25C 60 5 0.75 0.1 Guard Ring Die Construction for Transient Protection High Surge Current Capability Low Forward Voltage Drop Lead-Free Finish; RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. "Green" Device (Note 3) Qualified to AEC-Q101 Standards for High Reliability Mechanical Data Description and Applications This Schottky Barrier Rectifier is designed to meet the general requirements of commercial applications. It is ideally suited for use as: Polarity Protection Diode Re-Circulating Diode Switching Diode Case: TO220AB Case Material: Molded Plastic, "Green" Molding Compound; UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminals: Finish - Matte Tin Annealed over Copper Leadframe. Solderable per MIL-STD-202, Method 208 Polarity: As Marked on Body Weight: TO220AB - 1.95 grams (Approximate) TO220AB Pin 1 Pin 2 Pin 3 Top View Ordering Information Bottom View Device Schematic (Note 4) Part Number MBR1040CT MBR1045CT MBR1060CT-I Notes: Case Packaging TO220AB TO220AB TO220AB Shipping 50/Tube 50/Tube 50/Tube 1. EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant. All applicable RoHS exemptions applied. 2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated's definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green" products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 4. For packaging details, go to our website at https://www.diodes.com/design/support/packaging/diodes-packaging/. Marking Information TO220AB MBR10xxCT YYWW AB MBR1040CT-MBR1060CT-I Document number: DS30027 Rev. 9 - 3 MBR10xxCT = Product Type Marking Code AB = Foundry and Assembly Code YYWW = Date Code Marking YY = Last Two Digits of Year (ex: 13 = 2013) WW = Week (01 to 53) 1 of 5 www.diodes.com April 2018 (c) Diodes Incorporated NOT RECOMMENDED FOR NEW DESIGN NO ALTERNATE PART MBR1040CT MBR1060CT-I Maximum Ratings (Per Leg) (@TA = +25C, unless otherwise specified.) Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (Note 5) (Per Leg) (Total) Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load Symbol MBR1040CT MBR1045CT MBR1060CT-I Unit VRRM VRWM VR 40 45 60 V VR(RMS) 28 31.5 42 V IO 5 10 A IFSM 100 A Thermal Characteristics (Per Leg) Characteristic Typical Thermal Resistance Junction to Case (Note 5) Operating and Storage Temperature Range Symbol Value Unit RJC 3 C/W TJ, TSTG -55 to +150 C Electrical Characteristics (Per Leg) (@TA = +25C, unless otherwise specified.) Characteristic Symbol Forward Voltage Drop Maximum @ IF = 5.0A, TC = +125C @ IF = 5.0A, TC = +25C VFM Peak Reverse Current Maximum @ TC = +25C at Rated DC Blocking Voltage (Note 6) @ TC = +125C IRM 0.1 15 mA Typical Total Capacitance (Note 7) CT 150 pF Notes: MBR1040CT MBR1045CT 0.55 0.65 MBR1060CT-I Unit 0.65 0.75 V 5. Device mounted on PCB with minimum recommended pad layout and additional heat sink (45mm x 20mm x 12mm) attached, with minimum recommended pad layout per http://www.diodes.com/package-outlines.html. 6. Short duration pulse test used to minimize self-heating effect. 7. Measured at 1.0 MHz and applied reverse voltage of 4.0V DC and per element. MBR1040CT-MBR1060CT-I Document number: DS30027 Rev. 9 - 3 2 of 5 www.diodes.com April 2018 (c) Diodes Incorporated NOT RECOMMENDED FOR NEW DESIGN NO ALTERNATE PART IF, INSTANTANEOUS FORWARD CURRENT (A) 8 6 Per Element 4 2 0 0 50