July 2016
CAPACITORS
Type: Lead pitch 5.0 mm
FA28 [4.0x5.5 mm]
FA24 [4.5x5.5 mm]
FA26 [5.5x6.0 mm]
FA20 [5.5x7.0 mm]
FA22 [7.5x8.5 mm]
Lead pitch 2.5 mm
FA18 [4.0x5.5 mm]
FA14 [4.5x5.5 mm]
FA16 [5.5x6.0 mm]
FA11 [5.5x7.0 mm]
MLCC with Dipped Radial Lead
Halogen-free, Automotive Grade, High Temperature Application
FA Series (NP0, X8R)
(2/27)
20160721 / leadmlcc_halogenfree_fa150_en.fm
CAPACITORS
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using these products.
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
Before soldering, be sure to preheat components.
The preheating temperat ure should be se t so that th e tempera ture difference bet ween the so lder temper ature and prod uct temper ature
does not exceed 150°C.
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifesp an shortening may occur.
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
The products listed on this catalog are intended for use in automotive electronic equipment under a normal operation and use
condition.
The products are not designed or warranted to meet th e requirements of the applicat ions listed below, whose performance and/or
quality require a more stringent level of safety or reliability, or whose failure, malfunction or tr ouble could cause serious damage to
society, person or property.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in the each catalog, please contact us.
(1) Aerospace/Aviation equipment
(2) Transportation equipment (electric trains, ships, etc.)
(3) Medical equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipment
(6) Seabed equipment
(7) Transportation control equipment
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, b urning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(13) Other applications that are not considered general-purpose
applications
When designing your equipment even for automotive-purpose applications , you are kindly requested to take into consideration securing
protection circuit/device or providing backup circuits in your equipment.
REMINDERS
(3/27)
20160721 / leadmlcc_halogenfree_fa150_en.fm
CAPACITORS
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upg rading.
MLCC with Dipped Radial Lead
Halogen-free, Automotive Grade, High Temperature Application
FEATURES
A lineup with a rated voltage of 25V to 650V.
Compatible with a wide capacitance range of 10pF to 4.7µF.
For guaranteed applications withstanding rigorous temperature environments of up to 150°C.
The FA series for automotive use is AEC-Q200 compliant.
APPLICATION
Noise reduction measures for various motors for automotive use
Resonant circuits in areas such as keyless entry systems
Bypass capacitors such as for switching power sources, smoothing capacitors, etc.
Snubber circuits
PFC input filters
PART NUMB ER CONS TRUCTION
Applicable capacitance range: Ma x. 10 pF for D, over 10 pF for J and K.
Applied to the TDK ’s standard specification products.
OPERATING TEMPERATURE RANGE
The maximum operating temperature includes capacitor self-generated heat of up to 20°C.
The storage temperature range applies to after MLCC is mounted on board.
Overview of the
FA Series
FA 2 8 NP0 1H 100 D □□□ □
Series
name Lead pitch
(mm)
LxWxT
Dimensions
(mm)
Capacitance
temperature
characteristics
Rated
voltage
(V)
Nominal
capacitance Capacitance
toleranceInternal
code Packaging
Style
1 2.5 8 4.0x5.5x2.5 NP0 0±30ppm/°C 1E 25 100 10pF D ±0.5pF 0 Bulk
2 5.0 4 4.5x5.5x3.0 X8R ±15% 1H 50 101 100pF J ±5% 6 Taping
6 5.5x6.0x3.5 2A 100 102 1,000pF K ±10%
0 5.5x7.0x4.0 2E 250 105 1uF
1 5.5x7.0x4.0 2W 450
2 7.5x8.5x4.5 2J 630
Capacitance temperature
characteristics
Operating temperature range
Operating temperature Storage temperature
(°C) (°C)
NP0, X8R –55 to +150 –55 to +150
Product compatible with RoHS directive
Halogen-free
RoHS Directive Compliant Product: See the following for more details.https://product.tdk.com/info/en/environment/rohs/index.html
Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the t otal Cl and Br content is less than 1500ppm.
(4/27)
20160721 / leadmlcc_halogenfree_fa150_en.fm
CAPACITORS
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upg rading.
Overview of the FA Series
PACKAGE QUANTITY
Type Pac kage quantity
Taping (pieces / box) Bulk (pie ces / bag)
FA28 2000 500
FA24 2000 500
FA26 2000 500
FA20 1500 500
FA22 1000 500
FA18 2000 500
FA14 2000 500
FA16 2000 500
FA11 1500 500
(5/27)
20160721 / leadmlcc_halogenfree_fa150_en.fm
CAPACITORS
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upg rading.
Overview of the FA Series
RECOMMENDED FLOW PROFILE
Preheating Peak Natural cooling
Temp. Time Temp. Time Time
T1 t1 T2 t2 t3
110°C min. Over 60s. 260°C Within 5s. Over 60s.
Natural
cooling
Preheating
Soldering
T2
T1
t:
Time
t1 t2 t3
T:
Temperature
(6/27)
20160721 / leadmlcc_halogenfree_fa150_en.fm
CAPACITORS
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upg rading.
FA28 Type
SHAPE & DIMENSIONS
Dimensions in mm
4.0max.
5.0±1.0
5.5max.7.0±2.0
2.5max.
ø0.5+0.10
–0.03
(7/27)
20160721 / leadmlcc_halogenfree_fa150_en.fm
CAPACITORS
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upg rading.
FA28 Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
CLASS 1 (TEMPERATURE COMPENSATION)
* The part numbers are TDK’s standard specification products.
The " □ " of the Part Number contains the packaging symbol, 0 (Bulk packaging) or 6 (Tap ing packaging).
Temperature
characteristics Capacitance Tolerance Rated voltage
Edc (V) Part No.
NP0 10pF ±0.5pF 50 FA28NP01H100DNU0□
NP0 15pF ±5％50 FA28NP01H150JNU0□
NP0 22pF ±5％50 FA28NP01H220JNU0□
NP0 33pF ±5％50 FA28NP01H330JNU0□
NP0 47pF ±5％50 FA28NP01H470JNU0□
NP0 68pF ±5％50 FA28NP01H680JNU0□
NP0 100pF ±5％50 FA28NP01H101JNU0□
NP0 120pF ±5％50 FA28NP01H121JNU0□
NP0 150pF ±5％50 FA28NP01H151JNU0□
NP0 180pF ±5％50 FA28NP01H181JNU0□
NP0 220pF ±5％50 FA28NP01H221JNU0□
NP0 270pF ±5％50 FA28NP01H271JNU0□
NP0 330pF ±5％50 FA28NP01H331JNU0□
NP0 390pF ±5％50 FA28NP01H391JNU0□
NP0 470pF ±5％50 FA28NP01H471JNU0□
NP0 560pF ±5％50 FA28NP01H561JNU0□
NP0 680pF ±5％50 FA28NP01H681JNU0□
NP0 820pF ±5％50 FA28NP01H821JNU0□
NP0 1nF ±5％50 FA28NP01H102JNU0□
NP0 1.2nF ±5％50 FA28NP01H122JNU0□
NP0 1.5nF ±5％50 FA28NP01H152JNU0□
NP0 1.8nF ±5％50 FA28NP01H182JNU0□
NP0 2.2nF ±5％50 FA28NP01H222JNU0□
NP0 2.7nF ±5％50 FA28NP01H272JNU0□
NP0 3.3nF ±5％50 FA28NP01H332JNU0□
NP0 3.9nF ±5％50 FA28NP01H392JNU0□
NP0 4.7nF ±5％50 FA28NP01H472JNU0□
NP0 5.6nF ±5％50 FA28NP01H562JNU0□
NP0 6.8nF ±5％50 FA28NP01H682JNU0□
NP0 8.2nF ±5％50 FA28NP01H822JNU0□
NP0 10nF ±5％50 FA28NP01H103JNU0□
NP0 10pF ±0.5pF 100 FA28NP02A100DNU0□
NP0 15pF ±5％100 FA28NP02A150JNU0□
NP0 22pF ±5％100 FA28NP02A220JNU0□
NP0 33pF ±5％100 FA28NP02A330JNU0□
NP0 47pF ±5％100 FA28NP02A470JNU0□
NP0 68pF ±5％100 FA28NP02A680JNU0□
NP0 100pF ±5％100 FA28NP02A101JNU0□
NP0 120pF ±5％100 FA28NP02A121JNU0□
NP0 150pF ±5％100 FA28NP02A151JNU0□
NP0 180pF ±5％100 FA28NP02A181JNU0□
NP0 220pF ±5％100 FA28NP02A221JNU0□
NP0 270pF ±5％100 FA28NP02A271JNU0□
NP0 330pF ±5％100 FA28NP02A331JNU0□
NP0 390pF ±5％100 FA28NP02A391JNU0□
NP0 470pF ±5％100 FA28NP02A471JNU0□
NP0 560pF ±5％100 FA28NP02A561JNU0□
NP0 680pF ±5％100 FA28NP02A681JNU0□
NP0 820pF ±5％100 FA28NP02A821JNU0□
(8/27)
20160721 / leadmlcc_halogenfree_fa150_en.fm
CAPACITORS
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upg rading.
FA28 Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
CLASS 1 (TEMPERATURE COMPENSATION)
* The part numbers are TDK’s standard specification products.
The " □ " of the Part Number contains the packaging symbol, 0 (Bulk packaging) or 6 (Tap ing packaging).
Temperature
characteristics Capacitance Tolerance Rated voltage
Edc (V) Part No.
NP0 1nF ±5％100 FA28NP02A102JNU0□
NP0 1.2nF ±5％100 FA28NP02A122JNU0□
NP0 1.5nF ±5％100 FA28NP02A152JNU0□
NP0 1.8nF ±5％100 FA28NP02A182JNU0□
NP0 2.2nF ±5％100 FA28NP02A222JNU0□
NP0 2.7nF ±5％100 FA28NP02A272JNU0□
NP0 3.3nF ±5％100 FA28NP02A332JNU0□
NP0 820pF ±5％250 FA28NP02E821JNU0□
NP0 1nF ±5％250 FA28NP02E102JNU0□
NP0 1.2nF ±5％250 FA28NP02E122JNU0□
NP0 1.5nF ±5％250 FA28NP02E152JNU0□
NP0 1.8nF ±5％250 FA28NP02E182JNU0□
NP0 2.2nF ±5％250 FA28NP02E222JNU0□
(9/27)
20160721 / leadmlcc_halogenfree_fa150_en.fm
CAPACITORS
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upg rading.
FA28 Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
CLASS 2 (TEMPERATURE STABLE)
* The part numbers are TDK’s standard specification products.
The " □ " of the Part Number contains the packaging symbol, 0 (Bulk packaging) or 6 (Tap ing packaging).
Temperature
characteristics Capacitance Tolerance Rated voltage
Edc (V) Part No.
X8R 68nF ±10％25 FA28X8R1E683KNU0□
X8R 100nF ±10％25 FA28X8R1E104KNU0□
X8R 150nF ±10％25 FA28X8R1E154KRU0□
X8R 220nF ±10％25 FA28X8R1E224KRU0□
X8R 1nF ±10％50 FA28X8R1H102KNU0□
X8R 1.5nF ±10％50 FA28X8R1H152KNU0□
X8R 2.2nF ±10％50 FA28X8R1H222KNU0□
X8R 3.3nF ±10％50 FA28X8R1H332KNU0□
X8R 4.7nF ±10％50 FA28X8R1H472KNU0□
X8R 6.8nF ±10％50 FA28X8R1H682KNU0□
X8R 10nF ±10％50 FA28X8R1H103KNU0□
X8R 15nF ±10％50 FA28X8R1H153KNU0□
X8R 22nF ±10％50 FA28X8R1H223KNU0□
X8R 33nF ±10％50 FA28X8R1H333KNU0□
X8R 47nF ±10％50 FA28X8R1H473KNU0□
X8R 68nF ±10％50 FA28X8R1H683KRU0□
X8R 100nF ±10％50 FA28X8R1H104KRU0□
X8R 1nF ±10％100 FA28X8R2A102KNU0□
X8R 1.5nF ±10％100 FA28X8R2A152KNU0□
X8R 2.2nF ±10％100 FA28X8R2A222KNU0□
X8R 3.3nF ±10％100 FA28X8R2A332KNU0□
X8R 4.7nF ±10％100 FA28X8R2A472KNU0□
X8R 6.8nF ±10％100 FA28X8R2A682KNU0□
X8R 10nF ±10％100 FA28X8R2A103KNU0□
X8R 15nF ±10％100 FA28X8R2A153KNU0□
X8R 22nF ±10％100 FA28X8R2A223KRU0□
X8R 33nF ±10％100 FA28X8R2A333KRU0□
(10/27)
20160721 / leadmlcc_halogenfree_fa150_en.fm
CAPACITORS
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upg rading.
FA24 Type
SHAPE & DIMENSIONS
4.5max.
5.0±1.0
5.5max.7.0±2.0
3.0max.
ø0.5+0.10
–0.03 Dimensions in mm
(11/27)
20160721 / leadmlcc_halogenfree_fa150_en.fm
CAPACITORS
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upg rading.
FA24 Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
CLASS 1 (TEMPERATURE COMPENSATION)
* The part numbers are TDK’s standard specification products.
The " □ " of the Part Number contains the packaging symbol, 0 (Bulk packaging) or 6 (Tap ing packaging).
CLASS 2 (TEMPERATURE STABLE)
* The part numbers are TDK’s standard specification products.
The " □ " of the Part Number contains the packaging symbol, 0 (Bulk packaging) or 6 (Tap ing packaging).
Temperature
characteristics Capacitance Tolerance Rated voltage
Edc (V) Part No.
NP0 15nF ±5％50 FA24NP01H153JNU0□
NP0 22nF ±5％50 FA24NP01H223JNU0□
NP0 33nF ±5％50 FA24NP01H333JNU0□
NP0 3.9nF ±5％100 FA24NP02A392JNU0□
NP0 4.7nF ±5％100 FA24NP02A472JNU0□
NP0 5.6nF ±5％100 FA24NP02A562JNU0□
NP0 6.8nF ±5％100 FA24NP02A682JNU0□
NP0 8.2nF ±5％100 FA24NP02A822JNU0□
NP0 10nF ±5％100 FA24NP02A103JNU0□
NP0 3.3nF ±5％250 FA24NP02E332JNU0□
NP0 3.9nF ±5％250 FA24NP02E392JNU0□
NP0 4.7nF ±5％250 FA24NP02E472JNU0□
NP0 5.6nF ±5％250 FA24NP02E562JNU0□
NP0 6.8nF ±5％250 FA24NP02E682JNU0□
NP0 8.2nF ±5％250 FA24NP02E822JNU0□
NP0 10nF ±5％250 FA24NP02E103JNU0□
NP0 100pF ±5％450 FA24NP02W101JNU0□
NP0 120pF ±5％450 FA24NP02W121JNU0□
NP0 150pF ±5％450 FA24NP02W151JNU0□
NP0 180pF ±5％450 FA24NP02W181JNU0□
NP0 220pF ±5％450 FA24NP02W221JNU0□
NP0 270pF ±5％450 FA24NP02W271JNU0□
NP0 330pF ±5％450 FA24NP02W331JNU0□
NP0 390pF ±5％450 FA24NP02W391JNU0□
NP0 470pF ±5％450 FA24NP02W471JNU0□
NP0 560pF ±5％450 FA24NP02W561JNU0□
NP0 680pF ±5％450 FA24NP02W681JNU0□
NP0 820pF ±5％450 FA24NP02W821JNU0□
NP0 1nF ±5％450 FA24NP02W102JNU0□
NP0 1.2nF ±5％450 FA24NP02W122JNU0□
NP0 1.5nF ±5％450 FA24NP02W152JNU0□
NP0 1.8nF ±5％450 FA24NP02W182JNU0□
NP0 2.2nF ±5％450 FA24NP02W222JNU0□
NP0 2.7nF ±5％450 FA24NP02W272JNU0□
NP0 3.3nF ±5％450 FA24NP02W332JNU0□
NP0 3.9nF ±5％450 FA24NP02W392JNU0□
NP0 4.7nF ±5％450 FA24NP02W472JNU0□
NP0 5.6nF ±5％450 FA24NP02W562JNU0□
Temperature
characteristics Capacitance Tolerance Rated voltage
Edc (V) Part No.
X8R 150nF ±10％25 FA24X8R1E154KNU0□
X8R 220nF ±10％25 FA24X8R1E224KNU0□
X8R 330nF ±10％25 FA24X8R1E334KNU0□
X8R 470nF ±10％25 FA24X8R1E474KRU0□
X8R 68nF ±10％50 FA24X8R1H683KNU0□
X8R 100nF ±10％50 FA24X8R1H104KNU0□
X8R 150nF ±10％50 FA24X8R1H154KRU0□
X8R 220nF ±10％50 FA24X8R1H224KRU0□
X8R 22nF ±10％100 FA24X8R2A223KNU0□
X8R 47nF ±10％100 FA24X8R2A473KRU0□
X8R 68nF ±10％100 FA24X8R2A683KRU0□
(12/27)
20160721 / leadmlcc_halogenfree_fa150_en.fm
CAPACITORS
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upg rading.
FA26 Type
SHAPE & DIMENSIONS
5.5max.
5.0±1.0
6.0max.7.0±2.0
3.5max.
ø0.5+0.10
–0.03 Dimensions in mm
(13/27)
20160721 / leadmlcc_halogenfree_fa150_en.fm
CAPACITORS
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upg rading.
FA26 Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
CLASS 1 (TEMPERATURE COMPENSATION)
* The part numbers are TDK’s standard specification products.
The " □ " of the Part Number contains the packaging symbol, 0 (Bulk packaging) or 6 (Tap ing packaging).
CLASS 2 (TEMPERATURE STABLE)
* The part numbers are TDK’s standard specification products.
The " □ " of the Part Number contains the packaging symbol, 0 (Bulk packaging) or 6 (Tap ing packaging).
Temperature
characteristics Capacitance Tolerance Rated voltage
Edc (V) Part No.
NP0 47nF ±5％50 FA26NP01H473JNU0□
NP0 68nF ±5％50 FA26NP01H683JNU0□
NP0 100nF ±5％50 FA26NP01H104JNU0□
NP0 15nF ±5％100 FA26NP02A153JNU0□
NP0 22nF ±5％100 FA26NP02A223JNU0□
NP0 33nF ±5％100 FA26NP02A333JNU0□
NP0 15nF ±5％250 FA26NP02E153JNU0□
NP0 22nF ±5％250 FA26NP02E223JNU0□
NP0 6.8nF ±5％450 FA26NP02W682JNU0□
NP0 8.2nF ±5％450 FA26NP02W822JNU0□
NP0 10nF ±5％450 FA26NP02W103JNU0□
NP0 15nF ±5％450 FA26NP02W153JNU0□
NP0 3.9nF ±5％630 FA26NP02J392JNU0□
NP0 4.7nF ±5％630 FA26NP02J472JNU0□
NP0 5.6nF ±5％630 FA26NP02J562JNU0□
NP0 6.8nF ±5％630 FA26NP02J682JNU0□
NP0 8.2nF ±5％630 FA26NP02J822JNU0□
NP0 10nF ±5％630 FA26NP02J103JNU0□
Temperature
characteristics Capacitance Tolerance Rated voltage
Edc (V) Part No.
X8R 470nF ±10％25 FA26X8R1E474KNU0□
X8R 680nF ±10％25 FA26X8R1E684KNU0□
X8R 1uF ±10％25 FA26X8R1E105KNU0□
X8R 1.5uF ±10％25 FA26X8R1E155KRU0□
X8R 2.2uF ±10％25 FA26X8R1E225KRU0□
X8R 150nF ±10％50 FA26X8R1H154KNU0□
X8R 220nF ±10％50 FA26X8R1H224KNU0□
X8R 330nF ±10％50 FA26X8R1H334KNU0□
X8R 470nF ±10％50 FA26X8R1H474KNU0□
X8R 680nF ±10％50 FA26X8R1H684KRU0□
X8R 1uF ±10％50 FA26X8R1H105KRU0□
X8R 33nF ±10％100 FA26X8R2A333KNU0□
X8R 47nF ±10％100 FA26X8R2A473KNU0□
X8R 68nF ±10％100 FA26X8R2A683KNU0□
X8R 100nF ±10％100 FA26X8R2A104KNU0□
X8R 150nF ±10％100 FA26X8R2A154KNU0□
X8R 220nF ±10％100 FA26X8R2A224KRU0□
X8R 330nF ±10％100 FA26X8R2A334KRU0□
(14/27)
20160721 / leadmlcc_halogenfree_fa150_en.fm
CAPACITORS
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upg rading.
FA20 Type
SHAPE & DIMENSIONS
5.5max.
5.0±1.0
7.0max.7.0±2.0
4.0max.
ø0.5+0.10
–0.03 Dimensions in mm
(15/27)
20160721 / leadmlcc_halogenfree_fa150_en.fm
CAPACITORS
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upg rading.
FA20 Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
CLASS 1 (TEMPERATURE COMPENSATION)
* The part numbers are TDK’s standard specification products.
The " □ " of the Part Number contains the packaging symbol, 0 (Bulk packaging) or 6 (Tap ing packaging).
CLASS 2 (TEMPERATURE STABLE)
* The part numbers are TDK’s standard specification products.
The " □ " of the Part Number contains the packaging symbol, 0 (Bulk packaging) or 6 (Tap ing packaging).
Temperature
characteristics Capacitance Tolerance Rated voltage
Edc (V) Part No.
NP0 47nF ±5％100 FA20NP02A473JNU0□
NP0 68nF ±5％100 FA20NP02A683JNU0□
NP0 33nF ±5％250 FA20NP02E333JNU0□
NP0 47nF ±5％250 FA20NP02E473JNU0□
NP0 22nF ±5％450 FA20NP02W223JNU0□
NP0 33nF ±5％450 FA20NP02W333JNU0□
NP0 15nF ±5％630 FA20NP02J153JNU0□
NP0 22nF ±5％630 FA20NP02J223JNU0□
NP0 33nF ±5％630 FA20NP02J333JNU0□
Temperature
characteristics Capacitance Tolerance Rated voltage
Edc (V) Part No.
X8R 1.5uF ±10％25 FA20X8R1E155KNU0□
X8R 2.2uF ±10％25 FA20X8R1E225KNU0□
X8R 3.3uF ±10％25 FA20X8R1E335KNU0□
X8R 4.7uF ±10％25 FA20X8R1E475KRU0□
X8R 470nF ±10％100 FA20X8R2A474KRU0□
X8R 680nF ±10％100 FA20X8R2A684KRU0□
(16/27)
20160721 / leadmlcc_halogenfree_fa150_en.fm
CAPACITORS
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upg rading.
FA22 Type
SHAPE & DIMENSIONS
Dimensions in mm
7.5max.
5.0±1.0
8.5max.7.0±2.0
4.5max.
ø0.5+0.10
–0.03
(17/27)
20160721 / leadmlcc_halogenfree_fa150_en.fm
CAPACITORS
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upg rading.
FA22 Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
CLASS 1 (TEMPERATURE COMPENSATION)
* The part numbers are TDK’s standard specification products.
The " □ " of the Part Number contains the packaging symbol, 0 (Bulk packaging) or 6 (Tap ing packaging).
Temperature
characteristics Capacitance Tolerance Rated voltage
Edc (V) Part No.
NP0 150nF ±5％50 FA22NP01H154JNU0□
NP0 220nF ±5％50 FA22NP01H224JNU0□
NP0 100nF ±5％100 FA22NP02A104JNU0□
NP0 68nF ±5％250 FA22NP02E683JRU0□
NP0 100nF ±5％250 FA22NP02E104JRU0□
NP0 47nF ±5％450 FA22NP02W473JNU0□
NP0 68nF ±5％450 FA22NP02W683JNU0□
NP0 47nF ±5％630 FA22NP02J473JNU0□
(18/27)
20160721 / leadmlcc_halogenfree_fa150_en.fm
CAPACITORS
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upg rading.
FA18 Type
SHAPE & DIMENSIONS
Dimensions in mm
4.0max.
2.5±0.8
5.5max.7.0±2.0
2.5max.
ø0.5+0.10
–0.03
(19/27)
20160721 / leadmlcc_halogenfree_fa150_en.fm
CAPACITORS
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upg rading.
FA18 Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
CLASS 1 (TEMPERATURE COMPENSATION)
* The part numbers are TDK’s standard specification products.
The " □ " of the Part Number contains the packaging symbol, 0 (Bulk packaging) or 6 (Tap ing packaging).
Temperature
characteristics Capacitance Tolerance Rated voltage
Edc (V) Part No.
NP0 10pF ±0.5pF 50 FA18NP01H100DNU0□
NP0 15pF ±5％50 FA18NP01H150JNU0□
NP0 22pF ±5％50 FA18NP01H220JNU0□
NP0 33pF ±5％50 FA18NP01H330JNU0□
NP0 47pF ±5％50 FA18NP01H470JNU0□
NP0 68pF ±5％50 FA18NP01H680JNU0□
NP0 100pF ±5％50 FA18NP01H101JNU0□
NP0 120pF ±5％50 FA18NP01H121JNU0□
NP0 150pF ±5％50 FA18NP01H151JNU0□
NP0 180pF ±5％50 FA18NP01H181JNU0□
NP0 220pF ±5％50 FA18NP01H221JNU0□
NP0 270pF ±5％50 FA18NP01H271JNU0□
NP0 330pF ±5％50 FA18NP01H331JNU0□
NP0 390pF ±5％50 FA18NP01H391JNU0□
NP0 470pF ±5％50 FA18NP01H471JNU0□
NP0 560pF ±5％50 FA18NP01H561JNU0□
NP0 680pF ±5％50 FA18NP01H681JNU0□
NP0 820pF ±5％50 FA18NP01H821JNU0□
NP0 1nF ±5％50 FA18NP01H102JNU0□
NP0 1.2nF ±5％50 FA18NP01H122JNU0□
NP0 1.5nF ±5％50 FA18NP01H152JNU0□
NP0 1.8nF ±5％50 FA18NP01H182JNU0□
NP0 2.2nF ±5％50 FA18NP01H222JNU0□
NP0 2.7nF ±5％50 FA18NP01H272JNU0□
NP0 3.3nF ±5％50 FA18NP01H332JNU0□
NP0 3.9nF ±5％50 FA18NP01H392JNU0□
NP0 4.7nF ±5％50 FA18NP01H472JNU0□
NP0 5.6nF ±5％50 FA18NP01H562JNU0□
NP0 6.8nF ±5％50 FA18NP01H682JNU0□
NP0 8.2nF ±5％50 FA18NP01H822JNU0□
NP0 10nF ±5％50 FA18NP01H103JNU0□
NP0 10pF ±0.5pF 100 FA18NP02A100DNU0□
NP0 15pF ±5％100 FA18NP02A150JNU0□
NP0 22pF ±5％100 FA18NP02A220JNU0□
NP0 33pF ±5％100 FA18NP02A330JNU0□
NP0 47pF ±5％100 FA18NP02A470JNU0□
NP0 68pF ±5％100 FA18NP02A680JNU0□
NP0 100pF ±5％100 FA18NP02A101JNU0□
NP0 120pF ±5％100 FA18NP02A121JNU0□
NP0 150pF ±5％100 FA18NP02A151JNU0□
NP0 180pF ±5％100 FA18NP02A181JNU0□
NP0 220pF ±5％100 FA18NP02A221JNU0□
NP0 270pF ±5％100 FA18NP02A271JNU0□
NP0 330pF ±5％100 FA18NP02A331JNU0□
NP0 390pF ±5％100 FA18NP02A391JNU0□
NP0 470pF ±5％100 FA18NP02A471JNU0□
NP0 560pF ±5％100 FA18NP02A561JNU0□
NP0 680pF ±5％100 FA18NP02A681JNU0□
NP0 820pF ±5％100 FA18NP02A821JNU0□
NP0 1nF ±5％100 FA18NP02A102JNU0□
NP0 1.2nF ±5％100 FA18NP02A122JNU0□
NP0 1.5nF ±5％100 FA18NP02A152JNU0□
NP0 1.8nF ±5％100 FA18NP02A182JNU0□
NP0 2.2nF ±5％100 FA18NP02A222JNU0□
NP0 2.7nF ±5％100 FA18NP02A272JNU0□
NP0 3.3nF ±5％100 FA18NP02A332JNU0□
(20/27)
20160721 / leadmlcc_halogenfree_fa150_en.fm
CAPACITORS
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upg rading.
FA18 Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
CLASS 2 (TEMPERATURE STABLE)
* The part numbers are TDK’s standard specification products.
The " □ " of the Part Number contains the packaging symbol, 0 (Bulk packaging) or 6 (Tap ing packaging).
Temperature
characteristics Capacitance Tolerance Rated voltage
Edc (V) Part No.
X8R 68nF ±10％25 FA18X8R1E683KNU0□
X8R 100nF ±10％25 FA18X8R1E104KNU0□
X8R 150nF ±10％25 FA18X8R1E154KRU0□
X8R 220nF ±10％25 FA18X8R1E224KRU0□
X8R 1nF ±10％50 FA18X8R1H102KNU0□
X8R 1.5nF ±10％50 FA18X8R1H152KNU0□
X8R 2.2nF ±10％50 FA18X8R1H222KNU0□
X8R 3.3nF ±10％50 FA18X8R1H332KNU0□
X8R 4.7nF ±10％50 FA18X8R1H472KNU0□
X8R 6.8nF ±10％50 FA18X8R1H682KNU0□
X8R 10nF ±10％50 FA18X8R1H103KNU0□
X8R 15nF ±10％50 FA18X8R1H153KNU0□
X8R 22nF ±10％50 FA18X8R1H223KNU0□
X8R 33nF ±10％50 FA18X8R1H333KNU0□
X8R 47nF ±10％50 FA18X8R1H473KNU0□
X8R 68nF ±10％50 FA18X8R1H683KRU0□
X8R 100nF ±10％50 FA18X8R1H104KRU0□
X8R 1nF ±10％100 FA18X8R2A102KNU0□
X8R 1.5nF ±10％100 FA18X8R2A152KNU0□
X8R 2.2nF ±10％100 FA18X8R2A222KNU0□
X8R 3.3nF ±10％100 FA18X8R2A332KNU0□
X8R 4.7nF ±10％100 FA18X8R2A472KNU0□
X8R 6.8nF ±10％100 FA18X8R2A682KNU0□
X8R 10nF ±10％100 FA18X8R2A103KNU0□
X8R 15nF ±10％100 FA18X8R2A153KNU0□
X8R 22nF ±10％100 FA18X8R2A223KRU0□
X8R 33nF ±10％100 FA18X8R2A333KRU0□
(21/27)
20160721 / leadmlcc_halogenfree_fa150_en.fm
CAPACITORS
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upg rading.
FA14 Type
SHAPE & DIMENSIONS
Dimensions in mm
4.5max.
2.5±0.8
5.5max.7.0±2.0
3.0max.
ø0.5+0.10
–0.03
(22/27)
20160721 / leadmlcc_halogenfree_fa150_en.fm
CAPACITORS
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upg rading.
FA14 Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
CLASS 1 (TEMPERATURE COMPENSATION)
* The part numbers are TDK’s standard specification products.
The " □ " of the Part Number contains the packaging symbol, 0 (Bulk packaging) or 6 (Tap ing packaging).
CLASS 2 (TEMPERATURE STABLE)
* The part numbers are TDK’s standard specification products.
The " □ " of the Part Number contains the packaging symbol, 0 (Bulk packaging) or 6 (Tap ing packaging).
Temperature
characteristics Capacitance Tolerance Rated voltage
Edc (V) Part No.
NP0 15nF ±5％50 FA14NP01H153JNU0□
NP0 22nF ±5％50 FA14NP01H223JNU0□
NP0 33nF ±5％50 FA14NP01H333JNU0□
NP0 3.9nF ±5％100 FA14NP02A392JNU0□
NP0 4.7nF ±5％100 FA14NP02A472JNU0□
NP0 5.6nF ±5％100 FA14NP02A562JNU0□
NP0 6.8nF ±5％100 FA14NP02A682JNU0□
NP0 8.2nF ±5％100 FA14NP02A822JNU0□
NP0 10nF ±5％100 FA14NP02A103JNU0□
Temperature
characteristics Capacitance Tolerance Rated voltage
Edc (V) Part No.
X8R 150nF ±10％25 FA14X8R1E154KNU0□
X8R 220nF ±10％25 FA14X8R1E224KNU0□
X8R 330nF ±10％25 FA14X8R1E334KNU0□
X8R 470nF ±10％25 FA14X8R1E474KRU0□
X8R 68nF ±10％50 FA14X8R1H683KNU0□
X8R 100nF ±10％50 FA14X8R1H104KNU0□
X8R 150nF ±10％50 FA14X8R1H154KRU0□
X8R 220nF ±10％50 FA14X8R1H224KRU0□
X8R 22nF ±10％100 FA14X8R2A223KNU0□
X8R 47nF ±10％100 FA14X8R2A473KRU0□
X8R 68nF ±10％100 FA14X8R2A683KRU0□
(23/27)
20160721 / leadmlcc_halogenfree_fa150_en.fm
CAPACITORS
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upg rading.
FA16 Type
SHAPE & DIMENSIONS
Dimensions in mm
5.5max.
2.5±0.8
6.0max.7.0±2.0
3.5max.
ø0.5+0.10
–0.03
(24/27)
20160721 / leadmlcc_halogenfree_fa150_en.fm
CAPACITORS
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upg rading.
FA16 Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
CLASS 1 (TEMPERATURE COMPENSATION)
* The part numbers are TDK’s standard specification products.
The " □ " of the Part Number contains the packaging symbol, 0 (Bulk packaging) or 6 (Tap ing packaging).
CLASS 2 (TEMPERATURE STABLE)
* The part numbers are TDK’s standard specification products.
The " □ " of the Part Number contains the packaging symbol, 0 (Bulk packaging) or 6 (Tap ing packaging).
Temperature
characteristics Capacitance Tolerance Rated voltage
Edc (V) Part No.
NP0 47nF ±5％50 FA16NP01H473JNU0□
NP0 68nF ±5％50 FA16NP01H683JNU0□
NP0 100nF ±5％50 FA16NP01H104JNU0□
NP0 15nF ±5％100 FA16NP02A153JNU0□
NP0 22nF ±5％100 FA16NP02A223JNU0□
NP0 33nF ±5％100 FA16NP02A333JNU0□
Temperature
characteristics Capacitance Tolerance Rated voltage
Edc (V) Part No.
X8R 470nF ±10％25 FA16X8R1E474KNU0□
X8R 680nF ±10％25 FA16X8R1E684KNU0□
X8R 1uF ±10％25 FA16X8R1E105KNU0□
X8R 1.5uF ±10％25 FA16X8R1E155KRU0□
X8R 2.2uF ±10％25 FA16X8R1E225KRU0□
X8R 150nF ±10％50 FA16X8R1H154KNU0□
X8R 220nF ±10％50 FA16X8R1H224KNU0□
X8R 330nF ±10％50 FA16X8R1H334KNU0□
X8R 470nF ±10％50 FA16X8R1H474KNU0□
X8R 680nF ±10％50 FA16X8R1H684KRU0□
X8R 1uF ±10％50 FA16X8R1H105KRU0□
X8R 33nF ±10％100 FA16X8R2A333KNU0□
X8R 47nF ±10％100 FA16X8R2A473KNU0□
X8R 68nF ±10％100 FA16X8R2A683KNU0□
X8R 100nF ±10％100 FA16X8R2A104KNU0□
X8R 150nF ±10％100 FA16X8R2A154KNU0□
X8R 220nF ±10％100 FA16X8R2A224KRU0□
X8R 330nF ±10％100 FA16X8R2A334KRU0□
(25/27)
20160721 / leadmlcc_halogenfree_fa150_en.fm
CAPACITORS
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upg rading.
FA11 Type
SHAPE & DIMENSIONS
Dimensions in mm
5.5max.
2.5±0.8
7.0max.7.0±2.0
4.0max.
ø0.5+0.10
–0.03
(26/27)
20160721 / leadmlcc_halogenfree_fa150_en.fm
CAPACITORS
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upg rading.
FA11 Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
CLASS 1 (TEMPERATURE COMPENSATION)
* The part numbers are TDK’s standard specification products.
The " □ " of the Part Number contains the packaging symbol, 0 (Bulk packaging) or 6 (Tap ing packaging).
CLASS 2 (TEMPERATURE STABLE)
* The part numbers are TDK’s standard specification products.
The " □ " of the Part Number contains the packaging symbol, 0 (Bulk packaging) or 6 (Tap ing packaging).
Temperature
characteristics Capacitance Tolerance Rated voltage
Edc (V) Part No.
NP0 47nF ±5％100 FA11NP02A473JNU0□
NP0 68nF ±5％100 FA11NP02A683JNU0□
Temperature
characteristics Capacitance Tolerance Rated voltage
Edc (V) Part No.
X8R 1.5uF ±10％25 FA11X8R1E155KNU0□
X8R 2.2uF ±10％25 FA11X8R1E225KNU0□
X8R 3.3uF ±10％25 FA11X8R1E335KNU0□
X8R 4.7uF ±10％25 FA11X8R1E475KRU0□
X8R 470nF ±10％100 FA11X8R2A474KRU0□
X8R 680nF ±10％100 FA11X8R2A684KRU0□
(27/27)
20160721 / leadmlcc_halogenfree_fa150_en.fm
CAPACITORS
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upg rading.
Packaging Style
TAPING DIMENSIONS
Lead pitch 5.0 mm
(FA28, FA24, FA26, FA20, FA22 Type)
1 Accumulated pitch tolerance shall be ±2mm for 20 pitches.
2 Adhesive tape shall not stick out from carrier tape.
3The number of consecutiv e gaps in the product shall be three
or less.
Lead pitch 2.5 mm
(FA18, FA14, FA16, FA11 Type)
1 Accumulated pitch tolerance shall be ±2mm for 20 pitches.
2 Adhesive tape shall not stick out from carrier tape.
3The number of consecutiv e gaps in the product shall be three
or less.
AMMO PACK INNER BOX SIZE
Symbol Dimensions (mm)
P 12.7±1.0
P0112.7±0.3
P13.85±0.7
P26.35±1.3
W012.0±1.0
W19.0±0.5
W223.0max.
W318.0+1.0, –0.5
H016.0±0.5
1.0max.
t0.6±0.2
L0311.0max.
F5.0+0.8
ød ø0.5+0.1, –0.03
øD ø4.0±0.2
h0±2
Symbol Dimensions (mm)
P 12.7±1.0
P0112.7±0.3
P15.1±0.7
P26.35±1.3
W012.0±1.0
W19.0±0.5
W223.0max.
W318.0+1.0, –0.5
H016.0±0.5
1.0max.
t0.6±0.2
L0311.0max.
F2.5+0.5
ød ø0.5+0.1, –0.03
øD ø4.0±0.2
h0±2
PP2
L0
H0
W3
W1
F
P1
PΔh
W0W2
ød øD
P0
t
P1
PP2
L0
H0
W3
W1
ød
F
Δh
øD
t
P
W0W2
P0
340以下
50以下
250以下
Dimensions in mm
