MS & 97B - Series
ACRMS02 0313
I ntroduction & Page Contents
Page
Introduction
Amphenol MS & 97B series are two series of thread & Bayonet coupled connectors
designed to meet the operating requirements of MIL-C-5015. available in a variety of styles
& classes, these connectors are primarily used in a range of military and industrial
applications where specific degrees of environmental protection are required.
Although MS series have identical insert arrangements and other similar components
parts, the two series differ in that Amphenol MS series of connectors are also qualified to
meet the operating requirements of Defence Standard Joint Services Specifications
JSS50812, issued by the Electronics Components Standardization Organisation (LCSO)
Amphenol 97B connectors feature a quick a mating bayonet coupling with an audible full
mating feature. This series uses the same MIL-C-5015 insert patterns and are used in high
shock and vibration environments encountered in commercial, geophysical, aerospace,
ground support and shipboard applications.
Content
Introduction
Connector style
General description
Electrical data
Insert orientations
Insert arrangements
1
MS threaded series connector
97B reverse bayonet connector
Ordering information
1
2-3
4
5
6
7-17
19-22
50
23-49
Class F
Class A=R
Class A
Class E and F
Class R
cable
clamp back
shell
MS-3102
MS-4102
MS-3101
MS-4101
MS-3100
MS-4100
MS-3106
MS-4106
MS-3108
MS-4108
grommet
sleeve grommet
2
C onnector Styles
Class F
Class A=R
Class A
Class R
cable
clamp back
shell
grommet
sleeve grommet
Class F
97B - 3108
97B - 4108
97B - 3106
97B - 4106
97B - 3102
97B - 4102
97B - 3100
97B - 4100
97B - 3101
97B - 4101
97B - 3103
97B - 4103
C onnector Styles
3
These electrical connectors are designated MS
because the interchangeability and operating
characteristics are determined by U.S. Military
Specifications. These specifications are revised
from time to time to incorporate performance
requirements dictated by design advances and
more stringent requirements of allied equipment.
The several designations of MS and 97B
connectors meet different requirements of MIL-
C-5015. These designations and general
descriptions are as follows :
Shell
Shell constructions include solid back shell (A)
and environmental resistant (E, F & R).
Environmental resistant connectors provide a
moisture barrier and assure a positive seal. Shell
styles consist of wall type receptacles (3100),
cable receptacles (3101), box receptacles
(3102), straight plugs (3106) and angle plugs
(3108). Shell hardware is manufactured from
aluminium alloy and cadmium plated with olive
drab chromate finish. This finish has excellent
conductivity; it is non-reflecting and corrosion
resistant. Black anodised finish and cadmium-
free zinc plating with olive drab chromate finish
are also available. For details, contact factory.
Contacts
Pin and socket contacts are of brass and
generally silver plated. Gold plating is also
available. For details contact factory. These
contacts are available for solder or crimp
termination. Special arrangements of contacts
for pre-mating and pre-earth are also available.
Inserts and grommet
Synthetic inserts and grommet manufactured
according to MIL-R-3065, offer high dielectric
strength and are resistant to oils, gasoline and low
temperature. DAP is dimensionally stable, has high
arc resistance and high insulation resistance under
both humidity and thermal stress.
General description
Plugs are available in A, F and R types. Receptacles
are available in A, E, F and R types.
A Solid back shell
Intended for general service usage to provide
convenient means of connecting and disconnecting
electrical circuits in industrial and military
applications.
Environmental resisting
Intended for use where the connector will be subject
to heavy condensation and rapid changes in
temperature or pressure and/or where the connector
is subjected to high vibratory conditions.
EEnvironmental resisting with grommet seal and
strain relief backshell except for 3102 type.
FEnvironmental resisting with grommet seal,
strain relief backshell and front gasket seal for plug
type.
REnvironmental resisting with grommet seal,
shorter and lightweight.
Features for 97B reverse bayonet coupling connectors
with Mil-C-5015 insert patterns:
Quick positive coupling
Audible and tactile indication of full coupling
Waterproof
No lockwiring required
High shock and vibration capabilities
Operating temperature range with Neoprene
0 0
inserts: -55C to +125C
Insert available in Neoprene material (alternate
inserts materials available upon request)
Available in both crimp and solder terminations
Contacts available in gold and silver plating
Numerous finishes available
Zinc alloy plating (cadmium free) available
500 couplings minimum
Rugged construction; aluminum or stainless
steel components
Intermateable with existing VG95234
connectors
G eneral Description
4
Dielectric strength
Service rating Test Voltage
Vac rms
Inst. 1000V
A 2000V
D 2800V
E 3500V
B 4500V
C 7000V
Service rating
Service rating Operating Voltage
DC at Sea Level Operating Voltage
AC at Sea Level
Inst. 250V 200V
A 700V 500V
D 1250V 900V
E 1750V 1250V
B 2450V 1750V
C 4200V 3000V
Contact rating
Contact
Size Contact
Resistance
miliohms
Rated
Current
16 3.4613A
12 1.8323A
8 0.5246A
4 0.2680A
0 0.14150A
E lectrical Data
5
Position W
Position Y Position Z
Views looking into front face of pin insert or rear
of socket insert
18-5
18-9
18-13
18-14
20-7
20-8
20-9
20-12
20-14
16-7 20-16 22-18 24-4
Degree
W X Y Z
80 110 250 280
24-21 28-15 36-1
36-7
36-8
36-13
28-16
28-17
28-19
28-20
28-21
32-1
32-3
32-4
24-28
28-1
28-4
28-8
28-9
28-10
28-11
28-14
24-5
24-6
24-7
24-12
24-14
24-16
24-17
24-20
22-19
22-21
22-24
22-25
22-29
22-33
22-34
24-1
24-3
20-20
20-22
22-3
22-6
22-12
22-14
22-15
22-16
22-17
Position X
To avoid cross-plugging problems in applications
requiring the use of more than one connector of
the same size and arrangement, alternate insert
rotations are available as indicated in the
accompanying chart.
As shown in the daigram below, the front face of
the pin insert is rotated within the shell in a
clockwise direction from the normal shell key. The
socket insert would be rotated counterclockwise
the same number of degrees with respect to the
normal shell key.
The following insert arrangements have the same
alternate insert rotations for W, X, Y and Z which
are as below :
Insert
Arrang-
ement
Degrees
W
12S-3
14S-9
16S-5
18-8
18-1
18-22
20-3
20-4
14S-2
18-10
18-15
14S-5
16-9
16-11
16-13
18-3
18-4
20-5
16S-4
16S-1
18-12
14S-7
16-10
16S-6
18-20
18-29
16S-8
18-11
70
70
70
70
70
70
70
45
-
-
-
-
35
35
35
35
35
35
35
80
80
90
90
90
90
90
-
-
145
145
145
-
145
145
145
110
120
120
120
110
110
110
110
110
110
110
110
-
-
180
180
180
180
180
170
170
215
215
215
-
215
215
215
250
240
240
240
-
250
250
250
250
250
250
250
-
-
270
270
270
270
270
265
265
290
290
290
290
290
290
290
-
-
-
-
-
325
325
325
325
325
325
325
280
280
-
-
-
-
-
-
-
X Y Z
Insert
Arrang-
ement
Degrees
W
28-3
28-6
28-18
28-22
36-3
36-4
24-22
28-5
28-2
28-7
36-6
36-9
36-10
32-8
24-27
28-12
36-14
36-15
36-5
70
70
70
70
70
70
45
35
35
35
35
80
80
80
80
90
90
60
-
145
145
145
145
145
145
110
110
110
110
110
125
125
125
-
180
180
125
120
215
215
215
215
215
215
250
250
250
250
250
235
235
235
-
270
270
245
240
290
290
290
290
290
290
-
325
325
325
325
280
280
280
280
-
-
305
-
X Y Z
Insert
Arrang-
ement
Degrees
W
20-6
22-2
22-9
20-15
20-18
20-21
20-23
20-24
20-27
22-10
22-11
22-13
22-20
22-23
22-22
24-11
24-9
22-1
22-4
22-5
22-8
20-29
20-17
20-19
22-27
22-28
24-2
24-10
70
70
70
80
35
35
35
35
35
35
35
35
35
35
-
35
35
35
35
35
35
80
90
90
80
80
80
80
145
145
145
-
110
110
110
110
110
110
110
110
110
-
110
110
110
110
110
110
110
-
180
180
-
-
-
-
215
215
215
-
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
-
270
270
250
-
-
-
290
290
290
280
325
325
325
325
325
325
325
325
325
-
-
325
325
325
325
325
325
280
-
-
280
280
280
280
X Y Z
A
B
A
B
A
B
A
B
40-56 72 144 216 288
I nsert Orientation
6
Insert
Arran-
gement
Contact Size
0 4 8
10S-2
10SL-3
10SL-4
12S-3
12S-4
12-5
14S-2
14S-5
14S-6
14S-10
14S-12
16S-1
16S-3
16S-4
16S-5
16S-6
16S-8
16-9
18-5
18-8
18-9
18-17
18-19
18-20
18-22
18-29
18-30
18-31
20-3
20-4
20-6
20-7
18-24
18-10
18-11
18-12
18-7
18-1
18-4
16-10
16-11
16-13
18-3
16-12
18-6
16-2
16-7
18-13
18-15
18-16
18-14
14-3
14S-4
14S-7
14S-9
A
A
A
A
D
D
Inst
Inst
Inst
Inst
A
A
B
D
A
A
A
A
D
A
Inst
Inst
A
A
D
A
A
A
D
D
D
D/A
A/Inst
A
A
A
B
A/Inst
D
A
A
A
D
A
D
E
A
A
A
C
A
A
D
A
A
1
3
2
2
1
1
4
5
6
4
3
7
1
2
3
3
5
4
3
8
7
7
10
5
3
5
5
5
3
4
3
8
10
4
5
6
1
10
4
3
2
2
2
1
1
1
3
4
4
1
2
1
1
3
2
1
3
2
2
1
1
4
5
6
4
3
7
1
2
3
3
5
2
1
7
5
5
10
5
3
5
5
5
3
8
10
6
1
10
4
1
2
3
4
1
2
2
1
2
2
3
4
4
5
1
3
2
2
2
1
1
1
1
1
20-8 Inst 6 42
1
1
3
2
12 16
Service
Rating Total
Cont-
acts
14S-1 A3 3
14S-A7 A19 19
Insert
Arran-
gement
Contact Size
0 4 8
20-9
20-11
20-12
20-14
20-15
20-16
20-17
20-19
20-20
20-23
20-24
20-27
20-25
20-18
20-21
20-22
D/A
Inst
A
A
A
A
A
A
A
A
A
A
Inst
A
A
A
8
13
2
5
7
9
6
3
4
2
4
14
13
9
9
6
71 13
11 2 3
772 15
331
222
14
20-29
20-30
20-33
A
Inst
A
17
13
11
17
13
11
22-1
22-2
22-6
22-14
22-17
22-18
22-19
22-20
22-21
22-16
22-11
22-13
22-7
22-8
22-10
22-12
22-9
22-15
22-4
22-5
22-22
22-23
D
D
D
A
D/A
D/A
A
A
A
A
B
D/A
E
E
E
D
E
E/A
A
D
A
D/A
2
3
3
19
9
8
14
9
3
9
2
5
1
2
4
5
3
6
4
6
4
8
2
3
1
19
8
8
21
2
14
2 2
2 4
2
1
14
9
63
12
4
32
3
15
8
4
22-28
22-34
24-2
24-5
24-6
24-7
24-9
24-10
24-3
22-24
22-27 A
D
D
A
D/A
A
A
A
D
D/A
D/A 7
5
7
16
8
16
2
7
7
6
9
23
7
16
8
142
24-11 A 9 63
24-12 A 5 32
52
42 81 7
27
13
63
81 33
12 16
Service
Rating Total
Cont-
acts
A
20-A48 19
24-06 A642
24-16
24-17 D/A
D 7
53
3
3
2
1
Insert
Arran-
gement
Contact Size
0 4 8 12 16
Service
Rating Total
Cont-
acts
28-20
28-21
28-22
32-3
32-1
28-18
28-19 A
A
D
D
D/A
C/D/A/Inst
B/D/A 14
37
6
9
5
12
10 4
12
4 6
10 37
3 3
2 421 32
24-20
24-21
24-22
24-27
24-28
28-1
28-2
28-4
28-5
28-8
28-9
28-11
28-12
28-13
28-15
28-16
28-17
28-10
28-3
28-6
28-7
D
D
D
E
Inst
D/A
D
E/D
D
E/D/A
D
A
A
A
A
A
B/D/A
D/A
E
D
D
11
10
4
7 7
24
9
14
9
5
12
12
22
26
26
35
20
15
7
3
3
2
92 91
4
24
63 122
72 212
102 66
184 26
26
35
20
15
223
3
3
2
D
32-5 2 2
28-09
28-51
A
D
9
12
4
12
5
32-8 A 30 6 24
36-17
38-18
36-52
36-20
A
A
A
A
47
31
52
34
407 14141421
52
3022
36-15
36-16
36-8
36-9
36-10
36-11
36-13
36-14
36-12
D/A
A
A
A
A
A
E/A
D
A
35
47
47
31
48
48
17
16
48
35
407
48
48
48
2 15
5 5 6
1 46
1 2 14 14
36-3
36-6
36-7
36-5
36-4 D
A
A
A
D/A 6
6
47
4
3
40
36-1 D 22 4 18
33
2 4 7
4
3
40-56 A 85 85
A
40-63 61
D
32-17 4 4
32-6 A23 232 16
32-7
INST,A
35 728
32B-13 D13 13
32-22 A 54 54
18-06 6 4 2
20-2 1 1
24-4 1 3
36-46 A27 27
I nsert Arrangements
7
A
B
C
D
E
A
B
C
A
B
C
Front face of pin insert or rear of socket insert illustrated
CONTACT LEGEND 16 12 8 40
A
B
C
D
E
F
G
A
B
A
B
C
BC
DA
A
B
C
A
B
C
D
EA
B
C
D
E
F
A
B
C
D
AB AB
ABC
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
10S-2
A
1
16
10SL-3
A
3
16
C
Front of
socket insert
14S-7
A
3
16
B
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
16S-1
A
7
16
G
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
16S-5
A
3
16
A
16S-6
A
3
16
B
16S-8
A
5
16
E
*14S-12
A
3
16
B
100 rotation
of 14S-7
0
10SL-4
A
2
16
Front of
socket insert
12S-3
A
2
16
12-5
D
1
12
12S-4
A
1
16
14S-2
Inst.
4
16
14S-4
D
1
16
14S-5
Inst.
5
16
14S-6
Inst.
6
16
A
B
14S-9
A
2
16
*14S-10
Inst.
4
16
100 rotation
of 14S-2
0
*14-3
A
1
8
*16S-3
B
1
16
16S-4
D
2
16
*16-2
E
1
12
A
B
C
F
EG
D
14S-1
B
A
C
*Not tooled up, can be tooled up on request. Contact Factory.
14S-1
A
3
16
14S-A7
A
7
16
8
I nsert Arrangements
Front face of pin insert or rear of socket insert illustrated
CONTACT LEGEND 16 12 840
B
A
H
C
D
E
FG
B
A
C
D
EF
G
A
C
DB
A
B
C
D
A
B
C
D
EF
B
A
D
C
B
A
C
D
E
B
C
AA
B
A
B
AB
A
B
C
D
E
A
BC
DEFG
HJ
K
A
G
B
C
D
E
F
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
16-10
A
3
12
B
B
A
D
C
18-4
D
4
16
A
18-10
A
4
12
D
B
A
C
18-5
D
2 1
12 16
C
18-11
A
5
12
E
18-12
A
6
16
C or D
18-19
A
10
16
K
*18-13
A
1 3
8 12
A
18-20
A
5
16
D
18-8
A
1 7
12 16
H
16-11
A
2
12
16-12
A
1
4
*16-13
A
2
12
A
B
C
D
E
F
G
H
I
J
18-1
B,C,F,G=A;Bal.=Inst.
10
16
A
B
18-3
D
2
12
18-9
Inst.
2 5
12 16
18-15
A
4
12
*18-14
A
1 1
4 16
18-7
B
1
8
*18-6
D
1
4
18-16
C
1
12
100 rotation
of 18-9
-
o
*18-17
Inst.
2 5
12 16
*Not tooled up, can be tooled up on request. Contact Factory.
A
B
C
D
AB
C
16-7
A
1 2
8 16
C
16-9
A
2 2
12 16
18-06
A
2 4
16 12
B
A
C
D
E
F
9
I nsert Arrangements
Front face of pin insert or rear of socket insert illustrated
CONTACT LEGEND 16 12 8 4 0
B
A
GHC
D
E
FB
A
C
D
E F
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
AB
CE
D
*18-29
A
5
16
D
20-7
A,B,H,G=D;C,D,E,F=A
8
16
A
B
A
G
C
D
E
F
20-15
A
7
12
A or D
B
A
G
IH
C
D
EF
20-16
A
2 7
12 16
E
B
A
C
D
E
F
GH
20-9
H=D;Bal.=A
1 7
12 16
H
B
A
C
DF
E
20-17
A
5 1
12 16
E or F
A
B
C
20-3
D
4
12
A
B
A
C
D
E
F
GH
I
20-18
A
3 6
12 16
D
B
A
C
20-19
A
3
8
C
B
A
C
D
E
20-14
A
2 3
8 12
D
B
A
C
D
20-20
A
1 3
4 12
A
AB
CE
D
0
-
*18-30
A
5
16
C
110 rotation
of 18-20
AB
CE
D
0
-
*18-31
A
5
16
C
260 rotation
of 18-20
F
A
B
C
D
E
20-22
A
3 3
8 16
A
B
20-23
A
2
8
20-8
Inst.
2 4
8 16
BL
A
C
D
N
MEF
GHK
J
20-11
Inst.
13
16
B
A
*20-12
A
1 1
4 16
F
AB
C
D
E
G
H
I
*20-21
A
1 8
12 16
1
*Not tooled up, can be tooled up on request. Contact Factory.
A
B
C
DA
B
C
20-4
D
4
12
C or D
*20-6
D
3
16
A
AB
C
18-22
D
3
16
C
B
A
H
GI
C
D
E
FJ
250 rotation
of 18-1
-
o
*18-24
B,C,F,G=A;Bal.=Inst.
10
16
A
B
C
D
E
F
G
H
J
20A - 9
A
9
12
20-2
D
1
0
-
10
I nsert Arrangements
Front face of pin insert or rear of socket insert illustrated
CONTACT LEGEND 16 12 8 4 0
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
ABC
D
E
F
N
M
J
K
G
H
P
R
S
T
L
20-29
A
17
16
G
AB
C
D
E
F
G
H
J T YP
NK LM
SR
U
22-14
A
19
16
A
A
C B
D
22-10
E
4
16
C
KAB
C
D
E
F
H
JM
L
20-33
A
11
16
E
A
C
B
*22-6
D
2 1
8 16
B
ABE
D C
22-12
D
2 3
8 16
A
A
B
C
22-2
D
3
8
A
22-9
E
3
12
A
A
BC
22-13
E=D;A,B,C,D=A
4 1
12 16
E
A
B
E
D
C
22-5
D
2 4
12 16
D
AF
E B
CD
*22-4
A
2 2
8 12
C
B
A
D
C
AB
22-11
B
2
16
AB
22-1
D
2
8
A
BC
D
EF
N
M
J
K
GH
L
o
*20-30
Inst.
13
16
250 rotation
of 20-11
22-7
E
1
0
B A
*22-8
E
2
12
*Not tooled up, can be tooled up on request. Contact Factory.
A
B
C
D
E
F
G
H
I
J
K
L
M
N
20-27
A
14
16
M
A
BC
D
EF
GH
J
K
L
M
N
100 rotation
of 20-11
0
_
*20-25
Inst.
13
16
A
B
C
D
20-24
A
2 2
8 16
A
M
L
KUNB
P
V
T
JC
R
S
H
G
D
E
F
20 A - 48
A
19
16
11
I nsert Arrangements
Front face of pin insert or rear of socket insert illustrated
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
CONTACT LEGEND 16 12 8 4 0
22-28
A
7
12
G
C
B
A
F
G
E
D
22-20
A
9
16
D
A
B
C
D
E
FJ
GH
22-24
C,D,E=D;A,B,F=A
2 4
12 16
D
C
B
A
F
E
D
22-19
A
14
16
F
ABC
D
E
F
N
M
JK
G
HPL
22-23
H=D;Bal.=A
8
12
A or D
A
B
C
D
E
F
G
H
22-22
A
4
8
C or D
A
BC
D
*22-21
A
1 2
0 16
A
B
C
C
B
A
F
G
HJ
ED
22-27
J=D;Bal.=A
1 8
8 16
*Not tooled up, can be tooled up on request. Contact Factory.
A
B
H
G
F
EDC
22-18
A,B,F,G,H=D;C,D,E=A
8
16
D
*22-17
A=D;Bal.=A
1 8
12 16
E
AB
H
G
F
E
D
C
J
22-16
A
3 6
12 16
D
A
B
H
G
F
EDC
J
22-15
D=E;A,B,C,E,F=A
5 1
12 16
D
AB
C
D
E
F
24-5
A
16
16
S
A B
C
D
F H
J
L
P R
N
S
MK
GE
24-6
A,G,H=D;Bal.=A
8
12
D
AG
F
ED
H
C
B
24-4
A
3 1
16 0
-
A
24-4
B
C
D
24-2
D
7
12
A
AF
EGB
CD
*24-3
D
2 5
12 16
D
AF
EGB
CD
*22-34
D
3 2
12 16
E
C
A
B
ED
12
I nsert Arrangements
Front face of pin insert or rear of socket insert illustrated
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
CONTACT LEGEND 16 12 8 4 0
24-11
A
3 6
8 12
E
AB
E FD
G
H
I
C
24-21
D
1 9
8 16
E
BC
A
H
G
J K
D
E
F
*24-17
D
2 3
12 16
D
B
CDE
A
24-20
D
2 9
12 16
A
BC
J
H
L
K
G
F
D
E
A
*24-16
A,B,F,G=D;C,D,E=A
1 3 3
8 12 16
G
AB
C
D
E
FG
24-12
A
2 3
4 12
A
B
C
D
E
*24-27
E
7
16
D
A
B
C
D
G
F
E
24-22
D
4
8
D
B
C
A
D
28-1
A,J,E=D;Bal.=A
3 6
8 12
E
H A
G
F
E
J
B
C
D
F G H J
E
K L M N P Q
VUTS
R
W X Y Z
A B C D
24-28
Inst.
24
16
*Not tooled up, can be tooled up on request. Contact Factory.
24-10
A
7
8
D or E or G
B
C
GE
F A
D
A
B
24-9
A
2
4
24-7
A
2 14
12 16
G
H
I
J
K
LAB
C
D
E
F
G
O
MNP
*28-2
D
2 12
12 16
E
H P
K
M
N
L
A
G
FE
JB
C
D
A
B
C
DE
24-06
24-06
A
2 4
16 8
13
I nsert Arrangements
Front face of pin insert or rear of socket insert illustrated
CONTACT LEGEND 16 12 8 4 0
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
28-12
A
26
16
H
AB
C
D
E
F
G
W
V
U
T
S
R
P
N
MZ
Y
L
K
JH
X
ab
d
28-10
G=D;Bal.=A
2 2 3
4 8 12
G
B
A
G
C
D
E
F
28-11
A
4 18
12 16
M
B
A
G
H
IM
L
K
J
N
P
R
S
T
X
W
V
U
C
D
E
F
28-6
D
3
4
A
C
A
B
*28-13
A
26
16
H
100 rotation
of 28-12
o
AB
C
D
E
F
G
W
V
TU
S
R
P
N
MZ
Y
L
K
JH
X
ab
d
28-9
D
6 6
12 16
E
B
A
J
H
GK
M L
C
DE
F
28-8
L,M=E;B=D;Bal.=A
2 10
12 16
D
E
F
G
H
M
L
C
D
A
B
A
B
28-7
D
2
4
*28-4
G,S,P=E;Bal.=D
2 7
12 16
E
A
S
G
P
B
C
EF
D
*28-5
D
2 1 2
4 12 16
A
B
E
DC
28-3
E
3
8
A
A
B
C
A
B C
DF
GH
J
E
28-09
A
5 4
16 4
*Not tooled up, can be tooled up on request. Contact Factory.
14
I nsert Arrangements
32-5
D
2
0
BC
DEF
G
H
J
A
*32-3
D
1 2 2 4
0 4 12 16
B
C
D
A
E
32-1
A=E;B,C,D,E=A
2 3
0 12
28-51
D
12
12
A
B
C
D
E
F
H
J
K
L
M
N
Front face of pin insert or rear of socket insert illustrated
CONTACT LEGEND 16 12 8 4 0
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
B
A G H
C D
JE
KF
L
R
NMP
*28-17
R=B;M,N,P=D;A to L=A
15
16
N
A
E
K
S
Z
f
l m n p
g h j k
a b c d e
T U V W X Y
L M N P R
F G H J
B C D
28-21
A
37
16
A
B
A
G
H
C
D
J
E
K
L
F
M
28-18
M=C;G,H,J,K,L=D;A,B=ABal.=Inst.
12
16
B
A
G
H
C
J
E
L
KM
28-19
H,M=B;A,B=D;Bal.=A
4 6
12 16
H
B
A
G
H
C
J
E
DF
L
KN
P
M
28-20
A
10 4
12 16
E
B
F
C
D
E
A
28-22
D
3 3
4 16
*Not tooled up, can be tooled up on request. Contact Factory.
28-16
A
20
16
F
ABC
D
E
F
G
VU
T
S
R Q P
N
M
L
K
J
H
28-15
A
35
16
M
AB
CDEFG
W
V
UT
S
R
P
N
M
Z a b c
d e f g h
j k
l m
Y
L
K
J
H
X
15
I nsert Arrangements
B
D
E
F
C
A
BA
DE
I K L M
O P R S T
U V W
N
F
C
GH
J
AB
C D H JGF LM
N
S T U Y W
R
PO
XYZ
K
bcdeaf
ghj
i
klmnr
ovw
x y
zAA
AB AC
AD AE
AF AG
Front face of pin insert or rear of socket insert illustrated
CONTACT LEGEND 16 12 8 4 0
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
*Not tooled up, can be tooled up on request. Contact Factory.
A
D
CB
1
2
3
4
5
6
7
8
9
10
11
12
13
32B13
B
D
E
I
J
K
L
FC
G
H
M
N
O
P
R
S
T
U
V
W
X
Y
Z
a
b
c
d
e
A
32-8
A
6 24
12 16
S
KLMN
W
XY
Z
GH
IJ
S
T
UV
AB
CD
E F
OPR
WX
32-6
A
16 2 3 2
16 12 8 4
32-7
INST , A
4 24 7
16 12
F
G
H
I
J
R
S
T
U
V
K
L
M
N
W
X
Y
Z
A
B
C
D
E
O
P
f
g
h
j
k
a
b
c
d
e
32B-13
D
13
8
32-17
D
4
4
32-22
A
54
16
*36-1
D
4 18
12 16
36-3
D
3 3
0 12
16
I nsert Arrangements
Front face of pin insert or rear of socket insert illustrated
CONTACT LEGEND 16 12 8 4 0
B
A
C
D
M
I
J
K
L
N
R
T
X
W
V
U
S
Z
a
Y
b
c
f
e
dE
H
P
O
F
G
A
B C
D
GFEH
KI J M L
RPON
S T Y U V
W X Z a
b c d e
jh
gf
m n kpr
t
u
svw
z
y
x
kd
l m n p r s
xwvt
y z
u
e f g h j
aZYXWV
UTSRQPO
NMLKJH
C D E F
A B
G
b c
BA
C E
D
F
H
K L M N
O P
U V W X
Y Z a b c
d
hel f gm
nu w v
z
y
r
p
s
y
v
k
j
R S T
JI G
A
BC
A
B
C
D
A
F
E
B
C
D
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
36-4
A=D;B,C=A
3
0
*36-7
A
7 40
12 16
x or y
36-10
A
48
16
A
36-5
A
4
0
*36-8
A
1 46
12 16
Y
*36-11
A
48
16
A
100 rotation
of 36-10 250 rotation
of 36-10
o o
36-6
A
2 4
0 4
*36-9
A
1 2 14 14
4 8 12 16
P
*36-12
A
48
16
A
kd
l m n p r s
xwvt
y z
u
e f g h j
aZYXWV
UTSRQPO
NMLKJH
C D E F
A B
G
b c
kd
l m n p r s
xwvt
y z
u
e f g h j
aZYXWV
UTSRQPO
NMLKJH
C D E F
A B
G
b c
*Not tooled up, can be tooled up on request. Contact Factory.
17
I nsert Arrangements
Front face of pin insert or rear of socket insert illustrated
CONTACT LEGEND 16 12 8 4 0
S
R
Q
P
AB
C
D
E
F
G
H
J
K
ZYX
M
L
N
U
T
d
e
a
b
ck
jm
hg
V
fW
A B E
MNLK
OU
Y Z a
hd e lfgm
p
s
k
j
n
ruwv
y
z
y
b c
T
V W X
P R S
CDG
JI
F
H
M
SD
I
O
U
EA
B
H
PJ
KFC
G
L
N
R
T
X
W
c
b
f
e
Y
V
Z
da
P N
ML
A
B
C
K
J
HGFE
QD
R S
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
*36-15
M=D;Bal=A
35
16
J
*36-16
A
7 40
12 16
x or y
100 rotation
of 36-7
o
A B E
MNLK
OU
Y Z a
hd e lfgm
p
s
k
j
n
ruwv
y
z
y
b c
T
V W X
P R S
CDG
JI
F
H
*36-17
A
7 40
12 16
x or y
250 rotation
of 36-7
o
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
*36-13
N,P,Q=E;Bal.=A
2 15
12 16
A
B
K
J
I
H
G
NM
FE
D
L
Q
PC
*36-14
D
5 5 6
8 12 16
*36-18
A
1 2 14 16
4 8 12 16
100 rotation
of 36-9
o
R S T U V W
X Y Z a b c
d e h j
km
fg
P
H J
C D E F G
BA
K L NM
*36-20
A
2 2 30
8 12 16
k
A
E
L M N P R S
T
a b c d f g h i
j k m n p q r
s t u v w x
y z AA AB AC
AD AE AF AH
U V W X Y Z
F H J K
B C D
36-52
A
52
16
*Not tooled up, can be tooled up on request. Contact Factory.
40-56
A
85
16
NPRSTUVW
XYZacdf
hjkmnprs
tuvwxyz
bg
i
p
AA B
A
AC AD AE AF AH AJ AK AL AM AN
AP AR AS AT AU AV AW AX AY
AZ BA BB BC BD BE BF BH
BJ BK LB BM BN BP BR
BS BT BU BV
X Y
W Z
40 - 56
ACD
EFHJ K L M
B
36-46
A
27
16
40-63
A
61
16
A
E
L
MNPR
S
T
a
bc
d
U
V
W
X
Y
Z
F
H
J
K
B
C
D
G
18
I nsert Arrangements
MIL -C-5015
MS Threaded Version
connector
MS-3100 MS-4100
Cable Connecting Receptacle
MS-3101 MS-4101
MOUNTING HOLES
4.39 DIA. FOR SIZE 32 AND 36
3.73 DIA. FOR SIZE 24 AND 28
3.05 DIA. FOR ALL OTHER SIZES
4.55 DIA. FOR 40 SIZE
M
A
K
VPANEL OPENING
All dimensions are in mm
Connector
Size
1.98
1.98
1.98
1.98
1.98
1.98
3.17
3.17
3.17
3.17
3.17
3.17
3.17
3.17
3.45
14.29 20.62
20.62
20.62
23.82
23.82
26.97
26.97
30.17
33.32
36.52
39.67
46.02
53.0
58.72
62.00
14.29
14.29
14.29
19.05
19.05
19.05
19.05
19.05
19.05
20.64
20.64
22.25
22.22
22.22
18.25
20.64
20.64
23.02
23.02
24.61
24.61
26.99
29.37
31.75
34.92
39.69
44.45
49.21
55.58
25.68
27.76
27.76
30.43
30.43
32.82
32.82
35.07
38.38
41.55
44.70
51.08
57.15
63.78
69.85
5/8-24 NEF5/8-24 UNEF 11/16-24NEF
11/16-24NEF
3/4-20 UNEF
3/4-20 UNEF
3/4-20 UNEF
3/4-20 UNEF
7/8-20 UNEF1-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
7/8-20 UNEF1-20 UNEF 1-20 UNEF
1 1/8-18 NS
1 1/8-18 UNEF
1 1/4-18 NEF
1 1/4-18 UNEF
1 3/8-18 NEF
1 3/8-18 UNEF
1 1/2-18 UNEF 1 5/8-18 NEF1 3/4-18 UNS 1 7/8-16UN2.00-18 UNS 2 1/16-16UN
2 5/16-16 UN
2 1/4-16 UN
2 1/2-16 UN
10SL
12S
14S
14
12
16S
16
18
20
22
24
28
32
36
A K M O R S V
Thread
in inches
Thread
in inches
40
Wall mounting receptacle
V A
All dimensions are in mm
Connector
Size
5/8-24 NEF5/8-24 UNEF 11/16-24 NEF
11/16-24 NEF
3/4-20 UNEF
3/4-20 UNEF
3/4-20 UNEF
3/4-20 UNEF
7/8-20 UNEF1-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
7/8-20 UNEF1-20 UNEF 1-20 UNEF
1 1/8-18 NS
1 1/8-18 UNEF
1 1/4-18 NEF
1 1/4-18 UNEF
1 3/8-18 NEF
1 3/8-18 UNEF
1 1/2-18 UNEF 1 5/8-18 NEF1 3/4-18 UNS
2-18 UNS
2 5/16-16 UN
2 1/4-16 UN
2 1/2-16 UN
10SL
12S
14S
14
12
16S
16
18
20
22
24
28
32
36
A V
Thread
in inches
Thread
in inches
40
1 7/8-16UN
2 1/16-16UN
R
R
S
S
19
S hell style
M
A
A
Q
V
K
L
N
R
S
R
S
Box mounting receptacle
Straight Plug
MS-3102 MS-4102
MS-3106 MS-4106
MOUNTING HOLES
4.39 DIA. FOR SIZE 32 AND 36
3.73 DIA. FOR SIZE 24 AND 28
3.05 DIA. FOR ALL OTHER SIZES
4.55 FOR 40 SIZE
All dimensions are in mm
All dimensions are in mm
Note - Both versions, straight and diamond knurling available on coupling ring. For details, contact factory.
Connector
Size
1.98 30.18
1.98 30.18
41.28
41.28
41.28
49.28
49.28
49.28
49.28
49.28
49.28
49.28
49.28
30.18
30.18
1.98
1.98
1.98
1.98
3.17
3.17
3.17
3.17
3.17
3.17
3.17
3.17
3.45
13.89 15.87
17.46
17.46
19.05
19.05
22.22
22.22
25.40
28.57
31.75
34.92
41.27
48.26
53.97
58.25
14.28
14.28
14.28
19.05
19.05
19.05
19.05
19.05
19.05
20.64
20.64
22.22
22.22
22.22
18.25
20.64
20.64
23.02
23.02
24.61
24.61
26.99
29.37
31.75
34.92
39.69
44.45
49.21
55.58
25.68
28.04
28.04
30.43
30.43
32.82
32.82
35.08
38.38
41.55
44.73
51.08
57.15
63.78
69.85
5/8-24 UNEF
3/4-20 UNEF
3/4-20 UNEF
1-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 1/8-18 UNEF
1 1/4-18 UNEF
1 3/8-18 UNEF
1 1/2-18 UNEF
1 3/4-18 UNS
2-18 UNS
2 1/4-16 UN
2 1/2-16 UN
10SL
12S
14S
14
12
16S
16
18
20
22
24
28
32
36
A K L M N R S
Thread
in inches
Connector
Size
19.05
19.84
19.84
22.22
22.22
25.40
25.40
28.57
31.75
34.92
38.10
44.45
51.75
57.15
63.50
5/8-24 NEF5/8-24 UNEF 11/16-24NEF
11/16-24NEF
3/4-20 UNEF
3/4-20 UNEF
3/4-20 UNEF
3/4-20 UNEF
7/8-20 UNEF1-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
7/8-20 UNEF1-20 UNEF 1-20 UNEF
1 1/8-18 NS
1 1/8-18 UNEF
1 1/4-18 NEF
1 1/4-18 UNEF
1 3/8-18 NEF
1 3/8-18 UNEF
1 1/2-18 UNEF 1 5/8-18 NEF1 3/4-18 UNS
2-18 UNS
2 5/16-20 UN
2 1/4-16 UN
2 1/2-16 UN
10SL
12S
14S
14
12
16S
16
18
20
22
24
28
32
36
A Q
max V
Thread
in inches
Thread
in inches
40
40
1 7/8-16UN
2 1/16-16UN
20
S hell style
Right angle plug
MS-3108 MS-4108
Note - Both versions, straight and diamond knurling available on coupling ring. For details, contact factory.
All dimensions are in mm
Connector
Size
19.05
19.84
19.84
22.22
22.22
25.40
25.40
28.57
31.75
34.92
38.10
44.45
51.75
57.15
5/8-24 NEF5/8-24 UNEF 11/16-24 NEF
11/16-24 NEF
3/4-20 UNEF
3/4-20 UNEF
3/4-20 UNEF
3/4-20 UNEF
7/8-20 UNEF1-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
7/8-20 UNEF1-20 UNEF 1-20 UNEF
1 1/8-18 NS
1 1/8-18 UNEF
1 1/4-18 NEF
1 1/4-18 UNEF
1 3/8-18 NEF
1 3/8-18 UNEF
1 1/2-18 UNEF 1 5/8-18 NEF1 3/4-18 UNS 1 29/32-18 NS2-18 UNS 2 1/16-20 UNS2 1/4-16 NS
10SL
12S
14S
14
12
16S
16
18
20
22
24
28
32
36
A Q
max V
Thread
in inches
Thread
in inches
63.50 2 5/16-16 UN2 1/2-16 UN
40
Q max
V
A THREAD
21
A
BE
D F MAX
C G
O O
Other Accessories
Dummy receptacle
MS-3105
All dimensions are in mm
Note: The dash number also indicates shell size.
D
Thread
in inches
E F G
max.
CBA
Part number
(see note)
MS-3105-10S 25.4 18.26 3.05 5/8-24 14.27 3.96 8.20
11.43
11.43
13.36
13.36
16.41
16.41
18.03
23.54
25.93
29.21
34.67
46.56
3.96
3.96
3.96
3.96
3.96
3.96
5.16
5.16
5.16
5.16
5.16
9.11
14.27
14.27
14.27
19.05
19.05
19.05
19.05
19.05
19.05
20.62
20.62
22.2
3/4-20
3/4-20
7/8-20
7/8-20
1-20
1-201-20
1 1/8-18
1 1/4-18
1 3/8-18
1 3/4-18
2 1/4-16
1 1/2-18
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.73
3.73
4.39
20.62
20.62
23.01
23.01
24.61
24.61
26.97
29.36
31.75
34.92
39.67
49.22
27.79
27.79
30.17
30.17
32.54
32.54
34.92
38.10
41.27
44.45
50.8
63.5
MS-3105-12S
MS-3105-12
MS-3105-14S
MS-3105-14
MS-3105-16S
MS-3105-16
MS-3105-18
MS-3105-20
MS-3105-22
MS-3105-24
MS-3105-28
MS-3105-36
S hell style
22
B MAX
C MAX
A
E
D
MS Part number Shell size A Thread in inches B C D E
MS 10S-1-SL 5/8-24 11.11
11.11
11.11
11.11
11.11
11.11
11.11
12.7
12.7
12.7
12.7
11.11
20.7 3.6
3.6
3.6
3.6
3.6
4.4
4.4
4.4
4.4
4.8
4.8
4.8
102
MS 12-12S 3/4- 20 25.4 115
28.6 115
30.2 115
34.1 115
37.3 127
40.4 127
43.6 140
50 197
62.7 197
69 197
56.3 197
MS 14-14S
7/8-20
MS 16-16S 1-20
MS 18 1 1/8-18
MS 20 1 1/4-18
MS 22 1 3/8-18
MS 24 1 1/2-18
MS 28 1 3/4-18
MS 32 2-18
MS 36 2 1/4-18
MS 40 2 1/2-16
All dimensions are in mm
MS-25043
For receptacles Has internal threads and is used on all receptacles. Gasket is provided in the dust cap forming a watertight seal.
Notes : 1.
2.
3.
4.
For protective caps with nylon cord, contact factory.
Standard - Plating is Cad. For alternative finishes, contact factory.
Standard - straight knurling. For diamond knurling on caps, contact factory.
Please add 07 suffix for bigger end link.
MS 25043-10D
MS 25043-12D
MS 25043-14D
MS 25043-16D
MS 25043-18D
MS 25043-20D
MS 25043-22D
MS 25043-24D
MS 25043-28D
MS 25043-32D
MS 25043-36D
MS 25043-40D
B MAX
C MAX
A
E
D
MS Part number Shell size A Thread in inches B C D E
MS 10S-1-SL 5/8-24 16.67 17.4 4 102
MS 12-12S 3/4- 20 21.4 20.6 4 115
21.4 23.7 4 115
21.4 26.9 4 115
21.4 30 4 115
21.4 33 4.8 127
21.4 36.4 4.8 127
21.4 39.6 4.8 140
21.4 46 4.8 197
21.4 58.7 5.6 197
21.4 65 5.6 197
21.4 52 5.6 197
MS 14-14S
7/8-20
MS 16-16S 1-20
MS 18 1 1/8-18
MS 20 1 1/4-18
MS 22 1 3/8-18
MS 24 1 1/2-18
MS 28 1 3/4-18
MS 32 2-18
MS 36 2 1/4-18
MS 40 2 1/2-16
All dimensions are in mm
Other Accessories
Protective cap for MS series
MS-25042
For plugs Has external threads and is used on all plugs where a coupling ring is provided.
MS 25042-10D
MS 25042-12D
MS 25042-14D
MS 25042-16D
MS 25042-18D
MS 25042-20D
MS 25042-22D
MS 25042-24D
MS 25042-28D
MS 25042-32D
MS 25042-36D
MS 25042-40D
P rotective Cap For MS Series
MIL -C-5015
97B Series Bayonet Version
connector
23
V
R
SMK
L
T THD
100
27.60
27.60
27.60
27.60
33.80
33.80
33.80
33.80
35.70
35.70
37.30
37.30
5/8”-24 UNEF
5/8”-24 UNEF
3/4”-24 UNEF
7/8”-24 UNEF
7/8”-24 UNEF
1”-20 UNEF
1 1/8”-18 UNEF
1 1/8”-18 UNEF
1 3/8”-18 UNEF
1 5/8”-18 UNEF
1 7/8”-16 UN
2 1/16”-16 UN
PG
THD
'R'
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
18.21
21.40
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
2.79
3.20
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
14.20
14.20
14.20
14.20
19.00
19.00
19.00
19.00
20.60
20.60
22.20
22.20
18.20
20.60
23.00
24.60
24.60
27.00
29.40
31.80
34.90
39.70
44.50
49.20
25.40
28.00
30.00
32.50
32.50
35.00
38.00
41.00
44.00
50.80
57.00
63.50
‘L’
MAX
‘S’
+0.20
‘M’
+0.41 - 0.0
‘K’
+0.20
‘A’
+0.0 -0.15
Shell
Size
0
45
O
0 S/
A/-LAT
0 A
/
MK
L
T THD 27.60
27.60
27.60
27.60
33.80
33.80
33.80
33.80
35.70
35.70
37.30
37.30
5/8”-24 UNEF
5/8”-24 UNEF
3/4”-24 UNEF
7/8”-24 UNEF
7/8”-24 UNEF
1”-20 UNEF
1 1/8”-18 UNEF
1 1/4”-18 UNEF
1 3/8”-18 UNEF
1 5/8”-18 UNEF
1 7/8”-16 UN
2 1/16”-16 UN
T
-2A THD
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
18.21
21.40
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
2.79
3.20
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
14.20
14.20
14.20
14.20
19.00
19.00
19.00
19.00
20.60
20.60
22.20
22.20
20.60
23.60
25.40
28.60
28.60
31.70
34.90
31.70
41.30
47.60
54.00
60.60
25.00
27.60
29.60
32.10
32.10
34.60
37.60
40.90
44.40
50.70
56.90
63.40
‘L’
MAX
‘S’
+0.20
‘M’
+0.41 - 0.0
‘K’
+0.20
‘A’
+0.0 -0.15
Shell
Size ‘Q’
+0.20
102
0 V
/
MK
L
R
S
14.20
14.20
14.20
14.20
19.00
19.00
19.00
19.00
20.60
20.60
22.20
22.20
24.70
27.60
24.70
24.70
33.80
33.80
33.80
33.80
35.70
35.70
37.30
37.30
'R'
18.20
20.60
23.00
24.60
24.60
27.00
29.40
31.80
34.90
39.70
44.50
49.20
'L'
MAX.
SHELL
SIZE
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
18.21
21.40
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
2.79
3.20
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
25.40
28.00
30.00
32.50
32.50
35.00
38.00
41.00
44.50
50.80
57.00
63.50
'A'
+0.0
-0.15 'K'
+-0.20 'M'
+0.41
-0.0 'S'
+0.20
-
Wall mounting receptacle
Cable connecting receptacle
Box mounting receptacle
101
S hell style
24
0 A
/
M K
L
R
S
18.20
18.20
18.20
18.20
23.05
23.05
23.05
23.05
23.05
24.05
24.05
24.05
27.60
27.60
27.60
27.60
33.80
33.80
33.80
33.80
35.70
35.70
37.30
37.30
18.20
20.60
23.00
24.60
24.60
27.00
29.40
31.80
34.90
39.70
44.50
49.20
'L'
MAX.
SHELL
SIZE
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
18.21
21.40
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
2.79
3.20
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
25.40
28.00
30.00
32.50
32.50
35.00
38.00
41.00
44.50
50.80
57.00
63.50
'A'
+0.0
-0.15 'K'
+-0.20 'M'
+0.41
-0.0 'S'
+0.20
-
'R'
+0.20
-
‘A’
AFTER KNURLING ‘L’
T THD SHELL
SIZE 'A'
MAX.
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
22.80
25.60
29.20
32.00
32.00
36.50
39.90
43.10
46.60
53.40
60.10
66.30
56.00
56.00
54.00
56.00
67.00
74.00
75.00
78.00
78.00
82.00
82.00
90.00
5/8”-24 UNEF
5/8”-24 UNEF
3/4”-24 UNEF
7/8”-24 UNEF
7/8”-24 UNEF
1”-20 UNEF
1 1/8”-18 UNEF
1 1/4”-18 UNEF
1 3/8”-18 UNEF
1 5/8”-18 UNEF
1 7/8”-18 UN
2 1/16”-16 UN
'T'
- 2A THD
'L'
MAX
FL
A
DE
C
H
0 B
/
27.70
30.00
30.00
35.30
37.70
37.70
37.70
37.70
35.20
35.20
35.20
SHELL
SIZE A
-2A THREADS
10SL
14S
16S
16
18
20
22
24
28
32
36
7/8" - 20
1" 1/8-18 UNEF
1' 1/4-18 UNEF
1" 1/4- 18 UNEF
1" 3/8- 18 UNEF
1" 1/2- 18 UNEF
1" 5/8- 18 UNEF
1" 3/4- 18 UNS
2" - 18 UNS
2" 1/4- 16 UN
2" 1/2- 16 UN
UNEF
B
+0.0
-0.15
18.20
24.60
27.40
27.40
30..80
34.20
37.40
40.90
46.70
53.40
59.60
C
24.50
26.80
26.80
32.10
33.70
33.70
33.70
33.70
35.20
35.20
35.20
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
5.20
7.50
7.50
7.50
9.00
9.00
9.10
9.10
8.50
6.50
8.30
E
4.00
4.80
4.80
4.80
4.80
4.80
4.80
4.80
5.60
5.60
5.60
F
+-0.25
31.80
41.30
44.40
44.40
47.60
50.80
54.20
57.20
63.50
69.80
76.20
H
27.00
33.00
38.10
38.10
39.70
44.00
46.00
50.80
55.00
62.00
71.00
L
D
WALL THICKNESS
MIN MAX
Rear mounting Receptacle
Plug connector
Jam Nut Receptacles
107
106
103
25
10SL
12S
14S
16S
6
18
20
22
24
28
32
36
40
18.21
21.40
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
65.51
2.79
3.20
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
3.99
14.20
14.20
14.20
14.20
19.00
19.00
19.00
19.00
20.60
20.60
22.20
22.20
22.20
18.20
20.60
23.00
24.60
24.60
27.00
29.40
31.80
34.90
39.70
44.50
49.20
55.50
25.40
28.00
30.00
32.50
32.50
35.00
38.00
41.00
44.50
50.80
57.00
63.50
69.90
24.70
24.70
24.70
24.70
33.80
33.80
33.80
33.80
33.80
33.80
33.80
33.80
33.80
‘R’
‘M’
+0.41 - 0.0
‘K’
+0.20
‘A’
+0.0 -0.15
Shell
Size ‘S’
+0.20 ‘L’
+0.20
-
9.00
L
1.5 for size 12
0.76 for size 16
KM
R
S
A
o
Box mount Receptacle with PC Tail contacts
10SL
12S
14S
16S
6
18
20
22
24
28
32
36
40
18.21
21.40
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
65.51
2.79
3.20
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
3.99
18.20
18.20
18.20
18.20
23.05
23.05
23.05
23.05
23.05
24.05
24.05
24.05
24.05
18.20
20.60
23.00
24.60
24.60
27.00
29.40
31.80
34.90
39.70
44.50
49.20
55.50
25.40
28.00
30.00
32.50
32.50
35.00
38.00
41.00
44.50
50.80
57.00
63.50
69.90
24.70
24.70
24.70
24.70
33.80
33.80
33.80
33.80
33.80
33.80
33.80
33.80
33.80
‘R’
‘M’
+0.41 - 0.0
‘K’
+0.20
‘A’
+0.0 -0.15
Shell
Size ‘S’
+0.20 ‘L’
+0.20
-
Rear Mount Receptacle with PC Tail contacts
o
o
7.00
7.00
1.5 for size 12
0.76 for size 16
o
o
L9.00
KM
A
o
R
S
10SL
14S
16S
16
18
20
22
24
28
32
36
40
7/8”-2OUNEF
1” 1/8-18UNEF
1” 1/4-18UNEF
1” 1/4-18UNEF
1” 3/8-18UNEF
1” 1/2-18UNEF
1” 5/8-18UNEF
1” 3/4-18UNS
2”-18UNS
2” 1/4-16UN
2” 1/2-16UN
2” 3/4-16 UN
‘A’
-2A Threads
Shell
Size 18.20
24.60
27.40
27.40
30.80
34.20
37.40
40.90
46.70
53.40
59.60
65.50
‘B’
+0.00 - 0.15 35.00
41.30
44.40
44.40
48.20
52.40
55.50
59.00
66.00
72.00
80.00
87.00
5.00
6.00
6.00
6.00
7.00
7.00
7.00
7.00
7.00
7.00
8.00
8.00
2.50
2.50
2.50
2.50
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
31.80
38.10
41.20
41.20
45.00
49.20
52.40
55.20
62.20
68.20
75.20
82.20
G
‘C’
31.50
37.90
41.00
41.00
44.80
49.00
52.20
55.00
62.00
68.00
75.00
82.00
22.70
28.80
32.00
32.00
35.10
38.20
42.00
44.70
51.10
57.40
63.80
70.20
29.20
29.20
29.20
37.70
40.00
40.00
40.00
40.00
40.00
40.00
40.00
40.00
H L1
‘D’ ‘E’ FL3 L4
L2
13.50
13.50
13.50
13.50
15.00
15.00
15.00
15.00
15.00
15.00
15.00
15.00
12.50
12.50
12.50
21.00
21.00
21.00
21.00
21.00
21.00
21.00
21.00
21.00
20.90
27.20
30.40
30.40
33.60
36.80
39.90
43.10
49.20
55.70
62.00
68.50
Jam Nut receptacles with PC Tail contacts
C
D
L3 L2 6.00 max
0.76 (#16)
1.50 (#12)
G
E
F
B
AL1 7.00
9.00
L4
H
Panel Cut Out
S hell style
26
5/8-24 UNEF
5/8-24 UNEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 3/16-18UNEF
1 3/16-18UNEF
1 7/16-18UNEF
1 7/16-18UNEF
1 3/4-18UNS
2-18 UNS
10SL
12s
14s
16s
6
18
20
22
24
28
32
36
18.21
21.40
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
2.79
3.20
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
14.20
14.20
14.20
14.20
19.00
19.00
19.00
19.00
20.60
20.60
22.20
22.20
18.20
20.60
23.00
24.60
24.60
27.00
29.40
31.80
34.90
39.70
44.50
49.20
25.40
28.00
30.00
32.50
32.50
35.00
38.00
41.00
44.50
50.80
57.00
63.50
45.00
45.00
48.00
48.00
55.00
60.00
65.00
65.00
68.00
68.00
70.00
70.00
‘T’
THD
‘L’
MAX
‘S’
+0.20
‘R’
‘M’
+0.41 - 0.0
‘K’
+0.20
‘A’
+0.0 -0.15
Shell
Size
TTHD
100A
R
SM
L
K
A
A
100F
R
SMKL
SHELL
SIZE
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
18.21
21.40
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
2.79
3.20
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
14.20
14.20
14.20
14.20
19.00
19.00
19.00
19.00
20.60
20.60
22.20
22.20
18.20
20.60
23.00
24.60
24.60
27.00
29.40
31.80
34.90
39.70
44.50
49.20
25.40
28.00
30.00
32.50
32.50
35.00
38.00
41.00
44.50
50.80
57.00
63.50
60.00
60.00
61.00
61.00
68.00
72.00
74.00
74.00
78.00
78.00
82.00
82.00
'A'
+0.0
-0.15 'K'
+-0.20 'M'
+0.41
-0.0 'R' 'S'
+-0.20 'L'
MAX.
SHELL
SIZE
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
18.21
21.40
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
2.79
3.20
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
14.20
14.20
14.20
14.20
19.00
19.00
19.00
19.00
20.60
20.60
22.20
22.20
18.20
20.60
23.00
24.60
24.60
27.00
29.40
31.80
34.90
39.70
44.50
49.20
25.40
28.00
30.00
32.50
32.50
35.00
38.00
41.00
44.50
50.80
57.00
63.50
47.00
47.00
47.00
48.00
54.40
56.40
56.40
56.40
57.40
57.40
58.10
58.10
'A'
+0.0
-0.15 'K'
+-0.20 'M'
+0.41
-0.0 'R' 'S'
+-0.20 'L'
MAX.
100R
R
SMLK
A
Wall Mount Receptacle with A type Solid B/S
Wall Mount Receptacle with F type Strain Relief B/S & Environmental sealing Grommet
Wall Mount Receptacle with R type B/S & Environmental sealing Grommet
5/8-24 UNEF
5/8-24 UNEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 3/16-18UNEF
1 3/16-18UNEF
1 7/16-18UNEF
1 7/16-18UNEF
1 3/4-18UNS
2-18 UNS
10SL
12S
14S
16S
6
18
20
22
24
28
32
36
18.21
21.40
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
2.79
3.20
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
14.20
14.20
14.20
14.20
19.00
19.00
19.00
19.00
20.60
20.60
22.20
22.20
18.20
20.60
23.00
24.60
24.60
27.00
29.40
31.80
34.90
39.70
44.50
49.20
25.40
28.00
30.00
32.50
32.50
35.00
38.00
41.00
44.50
50.80
57.00
63.50
68.60
68.60
68.60
68.60
75.00
75.00
75.00
75.00
77.00
77.00
80.00
80.00
‘T’
THD
‘L’
MAX
‘S’
+0.20
‘R’
‘M’
+0.41 - 0.0
‘K’
+0.20
‘A’
+0.0 -0.15
Shell
Size
100AG
Wall Mount Receptacle with A type solid B/S & Environmental sealing Grommet
S hell style
27
100PG
A
PG THD
R
SM K L
56.00
56.00
56.00
58.00
66.00
74.00
74.00
77.00
77.00
78.00
78.00
90.00
7, 9, 11
7, 9, 11
11, 13.5
9, 11, 16
9, 11, 16
9, 11, 16, 21
11, 16, 21
13.5, 16, 21
13.5, 16, 21, 29
16, 21, 29
21, 29
21, 29, 36
PG
THD
'R'
10SL
12s
14s
16s
6
18
20
22
24
28
32
36
18.21
21.40
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
2.79
3.20
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
14.20
14.20
14.20
14.20
19.00
19.00
19.00
19.00
20.60
20.60
22.20
22.20
18.20
20.60
23.00
24.60
24.60
27.00
29.40
31.80
34.90
39.70
44.50
49.20
25.40
28.00
30.00
32.50
32.50
35.00
38.00
41.00
44.50
50.80
57.00
63.50
‘L’
MAX
‘S’
+0.20
‘M’
+0.41 - 0.0
‘K’
+0.20
‘A’
+0.0 -0.15
Shell
Size
Wall Mount Receptacle with PG threaded type B/S suitable for PG Glands
100EGM/PHM
R
SM K L
A
14.20
14.20
14.20
14.20
19.00
19.00
19.00
19.00
20.60
20.60
22.20
22.20
95.60
95.60
95.60
95.60
102.00
102.00
102.00
102.00
104.00
104.00
106.00
106.00
'R'
18.20
20.60
23.00
24.60
24.60
27.00
29.40
31.80
34.90
39.70
44.50
49.20
'L'
MAX.
SHELL
SIZE
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
18.21
21.40
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
2.79
3.20
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
25.40
28.00
30.00
32.50
32.50
35.00
38.00
41.00
44.50
50.80
57.00
63.50
'A'
+0.0
-0.15 'K'
+-0.20 'M'
+0.41
-0.0 'S'
+-0.20
Wall Mount Receptacle with EGM B/S for shielded cable & PHM B/S Unshielded cable
with sealing rubber bush
100SQ
A
R
SM K L
18.20
20.60
23.00
24.60
24.60
27.00
29.40
31.80
34.90
39.70
44.50
49.20
57.00
57.00
59.00
59.00
66.00
66.00
66.00
66.00
68.00
68.00
70.00
70.00
'R'
SHELL
SIZE
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
18.21
21.40
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
2.79
3.20
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
14.20
14.20
14.20
14.20
19.00
19.00
19.00
19.00
20.60
20.60
22.20
22.20
25.40
28.00
30.00
32.50
32.50
35.00
38.00
41.00
44.50
50.80
57.00
63.50
'A'
+0.0
-0.15 'K'
+-0.20 'M'
+0.41
-0.0 'S'
+-0.20 'L'
MAX.
Wall Mount Receptacle with SQ type Shielded B/S & Environmental sealing Grommet
& Heat shrinkable option
SHELL
SIZE
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
18.21
21.40
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
2.79
3.20
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
14.20
14.20
14.20
14.20
19.00
19.00
19.00
19.00
20.60
20.60
22.20
22.20
18.20
20.60
23.00
24.60
24.60
27.00
29.40
31.80
34.90
39.70
44.50
49.20
25.40
28.00
30.00
32.50
32.50
35.00
38.00
41.00
44.50
50.80
57.00
63.50
'A'
+0.0
-0.15 'K'
+-0.20 'M'
+0.41
-0.0 'R' 'S'
+-0.20 'L'
MAX.
52.50
52.50
54.40
54.40
61.00
62.00
62.00
65.00
65.00
66.00
71.00
75.00
100G
A
R
SM K L
Wall Mount Receptacle with G type B/S for heatshrinkable & Environmental sealing Grommet
S hell style
28
18.20
20.60
23.00
24.60
24.60
27.00
29.40
31.80
34.90
39.70
44.50
49.20
SHELL
SIZE
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
18.21
21.40
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
2.79
3.20
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
25.40
28.00
30.00
32.50
32.50
35.00
38.00
41.00
44.50
50.80
57.00
63.50
'A'
+0.0
-0.15 'K'
+-0.20 'M'
+0.41
-0.0 'S'
+-0.20 'L'
MAX.
'R'
14.20
14.20
14.20
14.20
19.00
19.00
19.00
19.00
20.60
20.60
22.20
22.20
21.50
21.50
23.00
24.60
24.60
27.00
29.00
31.00
34.00
36.00
44.00
46.00
'P'
MAX.
40.50
40.50
42.00
45.00
52.00
53.00
58.00
58.00
63.00
63.00
69.00
72.30
100RT
R
SM
L
K
P
A
0
Wall Mount Receptacle with 90 B/S & Environmental sealing Grommet
5/8-24 UNEF
5/8-24 UNEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 3/16-18UNEF
1 3/16-18UNEF
1 7/16-18UNEF
1 7/16-18UNEF
1 3/4-18UNS
2-18 UNS
10SL
12s
14s
16s
6
18
20
22
24
28
32
36
18.21
21.40
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
2.79
3.20
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
14.20
14.20
14.20
14.20
19.00
19.00
19.00
19.00
20.60
20.60
22.20
22.20
20.60
23.60
25.40
28.60
28.60
31.70
34.90
31.80
41.30
47.60
54.0
60.60
25.00
27.60
29.60
32.10
32.10
34.60
37.60
40.90
44.40
50.70
56.90
63.40
45.00
45.00
48.00
48.00
55.00
60.00
65.00
65.00
68.00
68.00
70.00
70.00
‘T’
THD
‘L’
MAX
‘S’
+0.20
‘Q’
‘M’
+0.41 - 0.0
‘K’
+0.20
‘A’
+0.0 -0.15
Shell
Size
101A
A
S
KL
M
T THD
Q
A/FLAT.
45
Cable connecting Receptacle with A type Solid B/S
101F
Q
A/FLAT.
S
45
A
KL
M
SHELL
SIZE
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
18.21
21.40
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
2.79
3.20
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
14.20
14.20
14.20
14.20
19.00
19.00
19.00
19.00
20.60
20.60
22.20
22.20
20.60
23.60
25.40
28.60
28.60
31.70
34.90
31.80
41.30
47.60
54.0
60.60
25.0
27.60
29.60
32.10
32.10
34.60
37.60
40.90
44.40
50.70
56.90
63.40
60.00
60.00
61.00
61.00
68.00
72.00
74.00
74.00
78.00
78.00
82.00
82.00
'A'
+0.0
-0.15 'K'
+-0.20 'M'
+0.41
-0.0 'Q'
+-0.20 'S'
+-0.20 'L'
MAX.
Cable connecting Receptacle with F type Strain Relief B/S & Environmental sealing Grommet
R
SM K L
A
100M
18.20
23.00
24.60
24.60
27.00
29.40
31.80
34.90
39.70
44.50
49.20
56.00
56.00
58.00
66.00
74.00
74.00
77.00
77.00
78.00
78.00
90.00
'R'
M12X1.5
M16X1.5
M16X1.5
M16X1.5
M20X1.5
M25X1.5
M25X1.5
M32X1.5
M32X1.5
M36X1.5
M40X1.5
M
THD
'L'
MAX.
10SL
14s
16s
6
18
20
22
24
28
32
36
18.21
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
2.79
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
14.20
14.20
14.20
19.00
19.00
19.00
19.00
20.60
20.60
22.20
22.20
25.40
30.00
32.50
32.50
35.00
38.00
41.00
44.50
50.80
57.00
63.50
‘S’
+0.20
‘M’
+0.41 - 0.0
‘K’
+0.20
‘A’
+0.0 -0.15
Shell
Size
Wall Mount Receptacle with Metric threaded type B/S suitable for Metric Glands
M Thread
S hell style
29
101G
A
0
45
Q
A/FLAT.
S
MKL
20.60
23.60
25.40
28.60
28.60
31.70
34.90
31.80
41.30
47.60
54.0
60.60
52.50
52.50
54.40
54.40
61.00
62.00
63.00
65.00
65.00
66.00
71.00
75.00
'Q'
+-0.20
SHELL
SIZE
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
18.21
21.40
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
2.79
3.20
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
14.20
14.20
14.20
14.20
19.00
19.00
19.00
19.00
20.60
20.60
22.20
22.20
25.40
28.00
30.00
32.50
32.50
35.00
38.00
41.00
44.50
50.80
57.00
63.50
'A'
+0.0
-0.15 'K'
+-0.20 'M'
+0.41
-0.0 'S'
+-0.20 'L'
MAX.
Cable connecting Receptacle with G type B/S for heatshrinkable & Environmental sealing Grommet
101AG
0
45
Q
A/FLAT.
S
A
T THD
M K
L
20.60
23.60
25.40
28.60
28.60
31.70
34.90
31.80
41.30
47.60
54.0
60.60
'Q'
+-0.20 68.60
68.60
68.60
68.60
75.00
75.00
75.00
75.00
77.00
77.00
80.00
80.00
5/8-24 UNEF
5/8-24 UNEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 3/16-18UNEF
1 3/16-18UNEF
1 7/16-18UNEF
1 7/16-18UNEF
1 3/4-18UNS
2-18 UNS
10SL
12s
14s
16s
6
18
20
22
24
28
32
36
18.21
21.40
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
2.79
3.20
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
14.20
14.20
14.20
14.20
19.00
19.00
19.00
19.00
20.60
20.60
22.20
22.20
25.40
28.00
30.00
32.50
32.50
35.00
38.00
41.00
44.50
50.80
57.00
63.50
‘T’
THD
‘L’
MAX
‘S’
+0.20
‘M’
+0.41 - 0.0
‘K’
+0.20
‘A’
+0.0 -0.15
Shell
Size
Cable connecting Receptacle with A type Solid B/S & Environmental sealing Grommet
101PG
Q
A/FLAT.
S
A
PG THD
M
KL
20.60
23.60
25.40
28.60
28.60
31.70
34.90
31.80
41.30
47.60
54.0
60.60
'Q'
+-0.20 56.00
56.00
56.00
58.00
66.00
74.00
74.00
77.00
77.00
78.00
78.00
90.00
7, 9, 11
7, 9, 11
11, 13.5
9, 11, 16
9, 11, 16
9, 11, 16, 21
11, 16, 21
13.5, 16, 21
13.5, 16, 21, 29
16, 21, 29
21, 29
21, 29, 36
PG
THD
10SL
12s
14s
16s
6
18
20
22
24
28
32
36
18.21
21.40
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
2.79
3.20
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
14.20
14.20
14.20
14.20
19.00
19.00
19.00
19.00
20.60
20.60
22.20
22.20
25.40
28.00
30.00
32.50
32.50
35.00
38.00
41.00
44.50
50.80
57.00
63.50
‘L’
MAX
‘S’
+0.20
‘M’
+0.41 - 0.0
‘K’
+0.20
‘A’
+0.0 -0.15
Shell
Size
Cable connecting Receptacle with PG threaded type B/S suitable for PG Glands
0
45
SHELL
SIZE
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
18.21
21.40
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
2.79
3.20
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
14.20
14.20
14.20
14.20
19.00
19.00
19.00
19.00
20.60
20.60
22.20
22.20
20.60
23.60
25.40
28.60
28.60
31.70
34.90
31.80
41.30
47.60
54.00
60.00
25.00
27.60
29.60
32.10
32.10
34.60
37.60
40.90
44.40
50.70
56.90
63.40
47.00
47.00
47.00
48.00
54.40
56.40
56.40
56.40
57.40
57.40
58.10
58.10
'A'
+0.0
-0.15 'K'
+-0.20 'M'
+0.41
-0.0 ‘Q'
+0.20 'S'
+-0.20 'L'
MAX.
101R
Q
A/FLAT.
S
45
A
K
L
M
Cable connecting Receptacle with R type B/S & Environmental sealing Grommet
S hell style
30
A
Q
A/FLAT.
45
S
MKL
101SQ 20.60
23.60
25.40
28.60
28.60
31.70
34.90
31.80
41.30
47.60
54.0
60.60
'Q'
+-0.20
57.00
57.00
59.00
59.00
66.00
66.00
66.00
66.00
68.00
68.00
70.00
70.00
SHELL
SIZE
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
18.21
21.40
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
2.79
3.20
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
14.20
14.20
14.20
14.20
19.00
19.00
19.00
19.00
20.60
20.60
22.20
22.20
25.40
28.00
30.00
32.50
32.50
35.00
38.00
41.00
44.50
50.80
57.00
63.50
'A'
+0.0
-0.15 'K'
+-0.20 'M'
+0.41
-0.0 'S'
+-0.20 'L'
MAX.
Cable connecting Receptacle with SQ type Shielded B/S & Environmental sealing Grommet &
Heat Shrinkable option
101M
Q
A/FLAT.
45
S
A
M THD
M K L
20.60
25.40
28.60
28.60
31.70
34.90
31.80
41.30
47.60
54.0
60.60
'Q'
+-0.20 56.00
56.00
58.00
66.00
74.00
74.00
77.00
77.00
78.00
78.00
90.00
M12X1.5
M16X1.5
M16X1.5
M16X1.5
M20X1.5
M25X1.5
M25X1.5
M32X1.5
M32X1.5
M36X1.5
M40X1.5
M
THD
'L'
MAX.
10SL
14s
16s
6
18
20
22
24
28
32
36
18.21
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
2.79
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
14.20
14.20
14.20
19.00
19.00
19.00
19.00
20.60
20.60
22.20
22.20
25.40
30.00
32.50
32.50
35.00
38.00
41.00
44.50
50.80
57.00
63.50
‘S’
+0.20
‘M’
+0.41 - 0.0
‘K’
+0.20
‘A’
+0.0 -0.15
Shell
Size
Cable connecting Receptacle with Metric threaded type B/S suitable for Metric Glands
5/8-24 UNEF
5/8-24 UNEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 3/16-18UNEF
1 3/16-18UNEF
1 7/16-18UNEF
1 7/16-18UNEF
1 3/4-18UNS
2-18 UNS
10SL
12s
14s
16s
6
18
20
22
24
28
32
36
18.21
21.40
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
2.79
3.20
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
18.20
18.20
18.20
18.20
23.05
23.05
23.05
23.05
23.05
24.05
24.05
24.05
18.20
20.60
23.00
24.60
24.60
27.00
29.40
31.80
34.90
39.70
44.50
49.20
25.40
28.00
30.00
32.50
32.50
35.00
38.00
41.00
44.50
50.80
57.00
63.50
45.00
45.00
48.00
48.00
55.00
60.00
65.00
65.00
68.00
68.00
70.00
70.00
‘T’
THD ‘L’
MAX
‘S’
+0.20
‘R’
+0.10
‘M’
+0.41 - 0.0
‘K’
+0.20
‘A’
+0.0 -0.15
Shell
Size
103A
R
S
A
K
L
M
T THD
Rear wall Mount Receptacle with A type Solid B/S
101EGM/PHM
A
L
K
M
Q
A/FLAT.
45
S
14.20
14.20
14.20
14.20
19.00
19.00
19.00
19.00
20.60
20.60
22.20
22.20
95.60
95.60
95.60
95.60
102.00
102.00
102.00
102.00
104.00
104.00
106.00
106.00
'L'
MAX.
SHELL
SIZE
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
18.21
21.40
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
2.79
3.20
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
25.40
28.00
30.00
32.50
32.50
35.00
38.00
41.00
44.50
50.80
57.00
63.50
'A'
+0.0
-0.15 'K'
+-0.20 'M'
+0.41
-0.0 'S'
+-0.20
20.60
23.60
25.40
28.60
28.60
31.70
34.90
31.80
41.30
47.60
54.0
60.60
'Q'
+-0.20
Cable connecting Receptacle with EGM B/S for shielded cable & PHM B/S Unshielded
cable with sealing rubber bush
S hell style
31
SHELL
SIZE
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
18.21
21.40
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
2.79
3.20
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
18.20
18.20
18.20
18.20
23.05
23.05
23.05
23.05
23.05
24.05
24.05
24.05
18.20
20.60
23.00
24.60
24.60
27.00
29.40
31.80
34.90
39.70
44.50
49.20
25.40
28.00
30.00
32.50
32.50
35.00
38.00
41.00
44.50
50.80
57.00
63.50
47.00
47.00
47.00
48.00
54.40
56.40
56.40
56.40
57.40
57.40
58.10
58.10
'A'
+0.0
-0.15 'K'
+-0.20 'M'
+0.41
-0.0 'R' 'S'
+-0.20 'L'
MAX.
103R
A
K
L
M
R
S
Rear wall Mount Receptacle with R type B/S & Environmental sealing Grommet
103G
A
R
SM K L
18.20
18.20
18.20
18.20
23.05
23.05
23.05
23.05
23.05
24.05
24.05
24.05
18.20
20.60
23.00
24.60
24.60
27.00
29.40
31.80
34.90
39.70
44.50
49.20
'R'
+-0.10
52.50
52.50
54.40
54.40
61.00
62.00
63.00
65.00
65.00
66.00
71.00
75.00
'L'
MAX.
SHELL
SIZE
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
18.21
21.40
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
2.79
3.20
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
25.40
28.00
30.00
32.50
32.50
35.00
38.00
41.00
44.50
50.80
57.00
63.50
'A'
+0.0
-0.15 'K'
+-0.20 'M'
+0.41
-0.0 'S'
+-0.20
Rear wall Mount Receptacle with G type B/S for heatshrinkable & Environmental sealing Grommet
103AG
A
T THD
R
SM K
L
68.60
68.60
68.60
68.60
75.00
75.00
75.00
75.00
77.00
77.00
80.00
80.00
5/8-24 UNEF
5/8-24 UNEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 3/16-18UNEF
1 3/16-18UNEF
1 7/16-18UNEF
1 7/16-18UNEF
1 3/4-18UNS
2-18 UNS
10SL
12s
14s
16s
6
18
20
22
24
28
32
36
18.21
21.40
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
2.79
3.20
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
18.20
18.20
18.20
18.20
23.05
23.05
23.05
23.05
23.05
24.05
24.05
24.05
18.20
20.60
23.00
24.60
24.60
27.00
29.40
31.80
34.90
39.70
44.50
49.20
25.40
28.00
30.00
32.50
32.50
35.00
38.00
41.00
44.50
50.80
57.00
63.50
‘T’
THD ‘L’
MAX
‘S’
+0.20
‘R’
+0.10
‘M’
+0.41 - 0.0
‘K’
+0.20
‘A’
+0.0 -0.15
Shell
Size
Rear wall Mount Receptacle with A type Solid B/S & Environmental sealing Grommet
SHELL
SIZE
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
18.21
21.40
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
2.79
3.20
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
18.20
18.20
18.20
18.20
23.05
23.05
23.05
23.05
23.05
24.05
24.05
24.05
18.20
20.60
23.00
24.60
24.60
27.00
29.40
31.80
34.90
39.70
44.50
49.20
'A'
+0.0
-0.15 'K'
+-0.20 'M'
+0.41
-0.0 'R'
+-0.10
25.40
28.00
30.00
32.50
32.50
35.00
38.00
41.00
44.50
50.80
57.00
63.50
'S'
+-0.20
5/8-24 UNEF
5/8 24 UNEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 3/16-18 UNEF
1 3/16-18 UNEF
1 7/16-18 UNEF
1 7/16-18 UNEF
1 3/4-18 UNS
2-18 UNS
'T'
THD.
60.00
60.00
61.00
61.00
68.00
72.00
74.00
74.00
78.00
78.00
82.00
82.00
'L'
MAX
103F
A
R
SM K L
Rear wall Mount Receptacle with F type Strain Relief B/S & Environmental sealing Grommet
S hell style
32
103 EGM/PHM
R
SM K L
A
14.20
14.20
14.20
14.20
19.00
19.00
19.00
19.00
20.60
20.60
22.20
22.20
95.60
95.60
95.60
95.60
102.00
102.00
102.00
102.00
104.00
104.00
106.00
106.00
'R'
18.20
20.60
23.00
24.60
24.60
27.00
29.40
31.80
34.90
39.70
44.50
49.20
'L'
MAX.
SHELL
SIZE
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
18.21
21.40
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
2.79
3.20
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
25.40
28.00
30.00
32.50
32.50
35.00
38.00
41.00
44.50
50.80
57.00
63.50
'A'
+0.0
-0.15 'K'
+-0.20 'M'
+0.41
-0.0 'S'
+-0.20
Rear wall Mount Receptacle with EGM B/S for shielded cable & PHM B/S Unshielded cable
with sealing rubber bush
103SQ
A
KL
MR
S
18.20
20.60
23.00
24.60
24.60
27.00
29.40
31.80
34.90
39.70
44.50
49.20
57.00
57.00
59.00
59.00
66.00
66.00
66.00
66.00
68.00
68.00
70.00
70.00
SHELL
SIZE
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
18.21
21.40
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
2.79
3.20
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
25.40
28.00
30.00
32.50
32.50
35.00
38.00
41.00
44.50
50.80
57.00
63.50
'A'
+0.0
-0.15 'K'
+-0.20 'M'
+0.41
-0.0 'S'
+-0.20 'L'
MAX.
18.20
18.20
18.20
18.20
23.05
23.05
23.05
23.05
23.05
24.05
24.05
24.05
'R'
+-0.10
18.20
23.00
24.60
24.60
27.00
29.40
31.80
34.90
39.70
44.50
49.20
56.00
56.00
58.00
66.00
74.00
74.00
77.00
77.00
78.00
78.00
90.00
'R'
M12X1.5
M16X1.5
M16X1.5
M16X1.5
M20X1.5
M25X1.5
M25X1.5
M32X1.5
M32X1.5
M36X1.5
M40X1.5
M
THD
'L'
MAX.
10SL
14s
16s
6
18
20
22
24
28
32
36
18.21
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
2.79
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
18.20
18.20
18.20
23.05
23.05
23.05
23.05
23.05
24.05
24.05
24.05
25.40
30.00
32.50
32.50
35.00
38.00
41.00
44.50
50.80
57.00
63.50
‘S’
+0.20
‘M’
+0.41 - 0.0
‘K’
+0.20
‘A’
+0.0 -0.15
Shell
Size
M THD
R
SM K L
A
103M
Rear wall Mount Receptacle with SQ type Shielded B/S & Environmental sealing Grommet
& Heat Shrinkable Option
Rear wall Mount Receptacle with Metric threaded type B/S suitable for Metric Glands
18.20
18.20
18.20
18.20
23.05
23.05
23.05
23.05
23.05
24.05
24.05
24.05
18.20
20.60
23.00
24.60
24.60
27.00
29.40
31.80
34.90
39.70
44.50
49.20
'M'
+0.41 -0.0 'R'
+-0.10 56.00
56.00
56.00
58.00
66.00
74.00
74.00
77.00
77.00
78.00
78.00
90.00
7, 9, 11
7, 9, 11
11, 13.5
9, 11, 16
9, 11, 16
9, 11, 16, 21
11, 16, 21
13.5, 16, 21
13.5, 16, 21, 29
16, 21, 29
21, 29
21, 29, 36
PG
THD
10SL
12s
14s
16s
6
18
20
22
24
28
32
36
18.21
21.40
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
2.79
3.20
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
25.40
28.00
30.00
32.50
32.50
35.00
38.00
41.00
44.50
50.80
57.00
63.50
‘L’
MAX
‘S’
+0.20
‘K’
+0.20
‘A’
+0.0 -0.15
Shell
Size
Rear wall Mount Receptacle with PG threaded type B/S suitable for PG Glands
PG THD
L
KM
A
103PG
R
S
S hell style
33
106A
TTHD
L
‘A’
AFTER KNURLING.
'T'
THD
5/8-24 UNEF
5/8-24 UNEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 3/16-18 UNEF
1 3/16-18 UNEF
1 7/16-18 UNEF
1 7/16-18 UNEF
1 3/4-18 UNS
2-18 UNS
SHELL
SIZE 'A'
MAX. 'L'
MAX.
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
22.80
25.60
29.20
32.00
32.00
36.50
39.39
46.10
46.60
53.40
60.10
36.30
44.00
44.00
46.00
46.00
46.00
55.00
62.00
65.00
65.00
68.00
70.00
70.00
Straight Plug with A type solid B/S
SHELL
SIZE 'A'
MAX.
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
22.80
25.60
29.20
32.00
32.00
36.50
39.90
43.10
46.60
53.40
60.10
66.30
60.00
60.00
60.00
60.00
68.00
72.00
74.00
74.00
78.00
78.00
82.00
82.00
5/8-24 UNEF
5/8-24 UNEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 3/16-18 UNEF
1 3/16-18 UNEF
1 7/16-18 UNEF
1 7/16-18 UNEF
1 3/4-18 UNS
2-18 UNS
'T'
THD.
'L'
MAX
106F
‘A’
AFTER KNURLING. L
'A'
MAX.
22.80
25.60
29.20
32.00
32.00
36.50
39.90
43.10
46.60
53.40
60.10
36.30
47.00
47.00
47.00
47.00
55.40
57.40
57.40
57.40
57.40
57.40
58.10
58.10
SHELL
SIZE
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
'L'
MAX.
106R
‘A’
AFTER KNURLING L
Rear wall Mount Receptacle with SQ type Shielded B/S & Environmental sealing Grommet
Straight Plug with R type B/S & Environmental sealing Grommet
18.20
20.60
23.00
24.60
24.60
27.00
29.40
31.80
34.90
39.70
44.50
49.20
SHELL
SIZE
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
18.21
21.40
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
2.79
3.20
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
25.40
28.00
30.00
32.50
32.50
35.00
38.00
41.00
44.50
50.80
57.00
63.50
'A'
+0.0
-0.15 'K'
+-0.20 'M'
+0.41
-0.0 'S'
+-0.20 'L'
MAX.
'R'
14.20
14.20
14.20
14.20
19.00
19.00
19.00
19.00
20.60
20.60
22.20
22.20
21.50
21.50
23.00
24.60
24.60
27.00
29.00
31.00
34.00
36.00
44.00
46.00
'P'
MAX.
40.50
40.50
42.00
45.00
52.00
53.00
58.00
58.00
63.00
63.00
69.00
72.30
0
Rear wall Mount Receptacle with 90 B/S & Environmental sealing Grommet
103RT
A
R
SM
L
K
P
S hell style
L is t Of Qualified Part Numbers
'A'
MAX.
22.80
25.60
29.20
32.00
32.00
36.50
39.90
43.10
46.60
53.40
60.10
66.30
SHELL
SIZE
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
56.00
56.00
56.00
58.00
66.00
74.00
74.00
77.00
77.00
78.00
78.00
90.00
7, 9, 11
7, 9, 11
11, 13.5
9, 11, 16
9, 11, 16
9, 11, 16, 21
11, 16, 21
13.5, 16, 21
13.5, 16, 21, 29
16, 21, 29
21, 29
21, 29, 36
PG
THD
‘L’
MAX
‘A’
AFTER KNURLING
106PG
PG THD
L
Straight Plug with PG threaded type B/S suitable for PG Glands
106AG
T THD
L
‘A’
AFTER KNURLING
'A'
MAX. 'L'
MAX.
22.80
25.60
29.20
32.00
32.00
36.50
39.90
43.10
46.60
53.40
60.10
66.30
68.60
68.60
67.00
67.00
76.00
76.00
76.00
76.00
78.00
78.00
80.00
80.00
SHELL
SIZE
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
5/8-24 UNEF
5/8-24 UNEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 3/16-18UNEF
1 3/16-18UNEF
1 7/16-18UNEF
1 7/16-18UNEF
1 3/4-18UNS
2-18 UNS
‘T’
THD
Straight Plug with A type Solid B/S & Environmental sealing Grommet
34
106 EGM/PHM
SHELL
SIZE
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
22.80
25.60
29.20
32.00
32.00
36.50
39.90
43.10
46.60
53.40
60.10
66.30
53.00
53.00
53.00
53.00
61.00
62.00
63.00
65.00
65.00
68.00
71.00
75.00
'A'
MAX 'L'
MAX
AFTER KNURLING L
‘A’
106G
Straight Plug with G type B/S for Heat Shrinkable & Environmental sealing Grommet
SHELL
SIZE
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
22.80
25.60
29.20
32.00
32.00
36.50
39.90
43.10
46.60
53.40
60.10
66.30
53.00
53.00
53.00
53.00
61.00
62.00
63.00
65.00
65.00
68.00
71.00
75.00
'A'
MAX 'L'
MAX
‘A’
AFTER KNURLING
S hell style
35
69.00
72.00
72.00
83.00
87.00
89.00
89.00
92.00
95.00
97.00
97.00
SHELL
SIZE A
-2A THREADS
10SL
14S
16S
16
18
20
22
24
28
32
36
7/8" - 20
1" 1/8-18 UNEF
1' 1/4-18 UNEF
1" 1/4- 18 UNEF
1" 3/8- 18 UNEF
1" 1/2- 18 UNEF
1" 5/8- 18 UNEF
1" 3/4- 18 UNS
2" - 18 UNS
2" 1/4- 16 UN
2" 1/2- 16 UN
UNEF
B
+0.0
-0.15
18.20
24.60
27.40
27.40
30..80
34.20
37.40
40.90
46.70
53.40
59.60
C
24.50
26.80
26.80
32.10
33.70
33.70
33.70
33.70
35.20
35.20
35.20
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
5.20
7.50
7.50
7.50
9.00
9.00
9.10
9.10
8.50
6.50
8.30
E
4.00
4.80
4.80
4.80
4.80
4.80
4.80
4.80
5.60
5.60
5.60
F
+-0.25
31.80
41.30
44.40
44.40
47.60
50.80
54.20
57.20
63.50
69.80
76.20
H
27.00
33.00
38.10
38.10
39.70
44.00
46.00
50.80
55.00
62.00
71.00
L
D
WALL THICKNESS
MIN MAX
107TF
H
FAL
D
B
CE
Jam Nut Receptacle with F type Strain Relief B/S with Environmental sealing Grommet
SHELL
SIZE A
-2A THREADS
10SL
14S
16S
16
18
20
22
24
28
32
36
7/8" - 20
1" 1/8-18 UNEF
1' 1/4-18 UNEF
1" 1/4- 18 UNEF
1" 3/8- 18 UNEF
1" 1/2- 18 UNEF
1" 5/8- 18 UNEF
1" 3/4- 18 UNS
2" - 18 UNS
2" 1/4- 16 UN
2" 1/2- 16 UN
UNEF
B
+0.0
-0.15
18.20
24.60
27.40
27.40
30..80
34.20
37.40
40.90
46.70
53.40
59.60
C
24.50
26.80
26.80
32.10
33.70
33.70
33.70
33.70
35.20
35.20
35.20
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
5.20
7.50
7.50
7.50
9.00
9.00
9.10
9.10
8.50
6.50
8.30
E
4.00
4.80
4.80
4.80
4.80
4.80
4.80
4.80
5.60
5.60
5.60
F
+-0.25
31.80
41.30
44.40
44.40
47.60
50.80
54.20
57.20
63.50
69.80
76.20
H
27.00
33.00
38.10
38.10
39.70
44.00
46.00
50.80
55.00
62.00
71.00
L
52.00
58.00
58.00
68.00
76.00
80.00
80.00
82.00
84.00
85.00
85.00
D
WALL THICKNESS
MIN MAX
107TA
T THD
L
A
F
CE
D
H
B
Jam Nut Receptacle with A type Solid B/S
106M
M THD
L
‘A’
AFTER KNURLING
'A'
MAX.
22.80
29.20
32.00
32.00
36.50
39.90
43.10
46.60
53.40
60.10
66.30
56.00
56.00
58.00
66.00
74.00
74.00
77.00
77.00
78.00
78.00
90.00
M12X1.5
M16X1.5
M16X1.5
M16X1.5
M20X1.5
M25X1.5
M25X1.5
M32X1.5
M32X1.5
M36X1.5
M40X1.5
M
THD
'L'
MAX.
10SL
14s
16s
6
18
20
22
24
28
32
36
Shell
Size
Straight Plug with Metric threaded type B/S suitable for Metric Glands
SHELL
SIZE
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
'A'
MAX. 'L'
MAX.
22.80
25.60
29.20
32.00
32.00
36.50
39.90
43.10
46.60
53.40
60.10
66.30
56.60
56.60
57.00
57.00
66.00
66.00
66.00
66.00
68.00
66.00
70.00
70.00
106SQ
L
‘A’
AFTER KNURLING
Straight Plug with SQ type Shielded B/S & Environmental sealing Grommet & Heat Shrinkable
option
S hell style
36
107TPG
B
PG THD
HC
DE
L
A
F
64.60
68.00
70.00
81.00
89.00
90.00
93.00
91.00
95.00
94.00
105.00
PG
THD
7, 9,11
11,13.5
9,11,16
9,11,16
9,11,16,21
11,16,21
13.5,16,21
13.5,16,21
16,21,29
21,29
21,29,36
SHELL
SIZE A
-2A THREADS
10SL
14S
16S
16
18
20
22
24
28
32
36
7/8" - 20
1" 1/8-18 UNEF
1' 1/4-18 UNEF
1" 1/4- 18 UNEF
1" 3/8- 18 UNEF
1" 1/2- 18 UNEF
1" 5/8- 18 UNEF
1" 3/4- 18 UNS
2" - 18 UNS
2" 1/4- 16 UN
2" 1/2- 16 UN
UNEF
B
+0.0
-0.15
18.20
24.60
27.40
27.40
30..80
34.20
37.40
40.90
46.70
53.40
59.60
C
24.50
26.80
26.80
32.10
33.70
33.70
33.70
33.70
35.20
35.20
35.20
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
5.20
7.50
7.50
7.50
9.00
9.00
9.10
9.10
8.50
6.50
8.30
E
4.00
4.80
4.80
4.80
4.80
4.80
4.80
4.80
5.60
5.60
5.60
F
+-0.25
31.80
41.30
44.40
44.40
47.60
50.80
54.20
57.20
63.50
69.80
76.20
H
27.00
33.00
38.10
38.10
39.70
44.00
46.00
50.80
55.00
62.00
71.00
L
D
WALL
MIN MAX
THICKNESS
Jam Nut Receptacle with PG threaded type B/S suitable for PG Glands
107AG
T THD
B
HCE
D
L
A
F
77.00
80.00
80.00
90.00
92.00
92.00
92.00
92.00
94.00
94.00
94.00
SHELL
SIZE A
-2A THREADS
10SL
14S
16S
16
18
20
22
24
28
32
36
7/8" - 20
1" 1/8-18 UNEF
1' 1/4-18 UNEF
1" 1/4- 18 UNEF
1" 3/8- 18 UNEF
1" 1/2- 18 UNEF
1" 5/8- 18 UNEF
1" 3/4- 18 UNS
2" - 18 UNS
2" 1/4- 16 UN
2" 1/2- 16 UN
UNEF
B
+0.0
-0.15
18.20
24.60
27.40
27.40
30..80
34.20
37.40
40.90
46.70
53.40
59.60
C
24.50
26.80
26.80
32.10
33.70
33.70
33.70
33.70
35.20
35.20
35.20
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
5.20
7.50
7.50
7.50
9.00
9.00
9.10
9.10
8.50
6.50
8.30
E
4.00
4.80
4.80
4.80
4.80
4.80
4.80
4.80
5.60
5.60
5.60
F
+-0.25
31.80
41.30
44.40
44.40
47.60
50.80
54.20
57.20
63.50
69.80
76.20
H
27.00
33.00
38.10
38.10
39.70
44.00
46.00
50.80
55.00
62.00
71.00
L
D
WALL THICKNESS
MIN MAX
Jam Nut Receptacle with AG type B/S for heat shrinkable & Environmental sealing Grommet
10SL
14S
16S
16
18
20
22
24
28
32
36
7/8”-2OUNEF
1” 1/8-18UNEF
1” 1/4-18UNEF
1” 1/4-18UNEF
1” 3/8-18UNEF
1” 1/2-18UNEF
1” 5/8-18UNEF
1” 3/4-18UNS
2”-18UNS
2” 1/4-16UN
2” 1/2-16UN
‘A’
-2A Threads
Shell
Size 18.20
24.60
27.40
27.40
30.80
34.20
37.40
40.90
46.70
53.40
59.60
‘B’
+0.00 - 0.15 4.00
4.80
4.80
4.80
4.80
4.80
4.80
4.80
5.60
5.60
5.60
24.50
26.80
26.80
32.10
33.70
33.70
33.70
33.70
35.20
35.20
35.20
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
5.20
7.50
7.50
7.50
9.00
9.00
9.10
9.10
8.50
6.50
8.30
E
MAX.
Wall Thickness
‘C’ D
MIN. 31.80
41.30
44.40
44.40
47.60
50.80
54.20
57.20
63.50
69.80
76.20
F
+0.25 27.00
33.00
38.10
38.10
39.70
44.00
46.00
50.80
55.00
62.00
71.00
61.00
66.00
66.00
76.00
78.00
79.00
81.00
79.00
82.00
85.00
90.00
H L
107G
56.00
59.00
70.00
72.00
72.00
72.00
72.00
72.00
74.00
74.00
74.00
SHELL
SIZE A
-2A THREADS
10SL
14S
16S
16
18
20
22
24
28
32
36
7/8" - 20
1" 1/8-18 UNEF
1' 1/4-18 UNEF
1" 1/4- 18 UNEF
1" 3/8- 18 UNEF
1" 1/2- 18 UNEF
1" 5/8- 18 UNEF
1" 3/4- 18 UNS
2" - 18 UNS
2" 1/4- 16 UN
2" 1/2- 16 UN
UNEF
B
+0.0
-0.15
18.20
24.60
27.40
27.40
30..80
34.20
37.40
40.90
46.70
53.40
59.60
C
24.50
26.80
26.80
32.10
33.70
33.70
33.70
33.70
35.20
35.20
35.20
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
5.20
7.50
7.50
7.50
9.00
9.00
9.10
9.10
8.50
6.50
8.30
E
4.00
4.80
4.80
4.80
4.80
4.80
4.80
4.80
5.60
5.60
5.60
F
+-0.25
31.80
41.30
44.40
44.40
47.60
50.80
54.20
57.20
63.50
69.80
76.20
H
27.00
33.00
38.10
38.10
39.70
44.00
46.00
50.80
55.00
62.00
71.00
L
D
WALL THICKNESS
MIN MAX
Jam Nut Receptacle with R type B/S with Environmental sealing Grommet
107TRHC
DE
A
FL
B
Jam Nut Receptacle with G type B/S for Heat shrinkable & Environmental sealing Grommet
H
FL
A
E
D
C
B
0
/
S hell style
37
107TM
F
HC
DE
AL
S
M THD
M
THD
M12X1.5
M16X1.5
M16X1.5
M16X1.5
M20X1.5
M25X1.5
M25X1.5
M32X1.5
M32X1.5
M36X1.5
M40X1.5
66.00
70.20
70.20
80.00
81.00
81.00
82.00
82.00
84.00
84.00
84.00
SHELL
SIZE A
-2A THREADS
10SL
14S
16S
16
18
20
22
24
28
32
36
7/8" - 20
1" 1/8-18 UNEF
1' 1/4-18 UNEF
1" 1/4- 18 UNEF
1" 3/8- 18 UNEF
1" 1/2- 18 UNEF
1" 5/8- 18 UNEF
1" 3/4- 18 UNS
2" - 18 UNS
2" 1/4- 16 UN
2" 1/2- 16 UN
UNEF
B
+0.0
-0.15
18.20
24.60
27.40
27.40
30..80
34.20
37.40
40.90
46.70
53.40
59.60
C
24.50
26.80
26.80
32.10
33.70
33.70
33.70
33.70
35.20
35.20
35.20
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
5.20
7.50
7.50
7.50
9.00
9.00
9.10
9.10
8.50
6.50
8.30
E
4.00
4.80
4.80
4.80
4.80
4.80
4.80
4.80
5.60
5.60
5.60
F
+-0.25
31.80
41.30
44.40
44.40
47.60
50.80
54.20
57.20
63.50
69.80
76.20
H
27.00
33.00
38.10
38.10
39.70
44.00
46.00
50.80
55.00
62.00
71.00
L
D
WALL THICKNESS
MIN MAX
49.00
54.00
57.00
66.00
69.00
75.00
75.00
77.00
80.00
84.00
87.00
'P'
MAX.
21.50
23.00
24.60
24.60
27.00
29.00
31.00
34.00
36.00
44.00
46.00
SHELL
SIZE A
-2A THREADS
10SL
14S
16S
16
18
20
22
24
28
32
36
7/8" - 20
1" 1/8-18 UNEF
1' 1/4-18 UNEF
1" 1/4- 18 UNEF
1" 3/8- 18 UNEF
1" 1/2- 18 UNEF
1" 5/8- 18 UNEF
1" 3/4- 18 UNS
2" - 18 UNS
2" 1/4- 16 UN
2" 1/2- 16 UN
UNEF
B
+0.0
-0.15
18.20
24.60
27.40
27.40
30..80
34.20
37.40
40.90
46.70
53.40
59.60
C
24.50
26.80
26.80
32.10
33.70
33.70
33.70
33.70
35.20
35.20
35.20
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
5.20
7.50
7.50
7.50
9.00
9.00
9.10
9.10
8.50
6.50
8.30
E
4.00
4.80
4.80
4.80
4.80
4.80
4.80
4.80
5.60
5.60
5.60
F
+-0.25
31.80
41.30
44.40
44.40
47.60
50.80
54.20
57.20
63.50
69.80
76.20
H
27.00
33.00
38.10
38.10
39.70
44.00
46.00
50.80
55.00
62.00
71.00
L
D
WALL THICKNESS
MIN MAX
107TRT
F
HC
DE
P
L
A
B
0
Jam Nut Receptacle with 90 B/S & Environmental sealing Grommet
Jam Nut Receptacle with Metric threaded type B/S suitable for Metric Glands
107TSQ
HCDE
L
A
F
66.00
70.20
70.20
80.00
81.00
81.00
82.00
82.00
84.00
84.00
84.00
SHELL
SIZE A
-2A THREADS
10SL
14S
16S
16
18
20
22
24
28
32
36
7/8" - 20
1" 1/8-18 UNEF
1' 1/4-18 UNEF
1" 1/4- 18 UNEF
1" 3/8- 18 UNEF
1" 1/2- 18 UNEF
1" 5/8- 18 UNEF
1" 3/4- 18 UNS
2" - 18 UNS
2" 1/4- 16 UN
2" 1/2- 16 UN
UNEF
B
+0.0
-0.15
18.20
24.60
27.40
27.40
30..80
34.20
37.40
40.90
46.70
53.40
59.60
C
24.50
26.80
26.80
32.10
33.70
33.70
33.70
33.70
35.20
35.20
35.20
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
5.20
7.50
7.50
7.50
9.00
9.00
9.10
9.10
8.50
6.50
8.30
E
4.00
4.80
4.80
4.80
4.80
4.80
4.80
4.80
5.60
5.60
5.60
F
+-0.25
31.80
41.30
44.40
44.40
47.60
50.80
54.20
57.20
63.50
69.80
76.20
H
27.00
33.00
38.10
38.10
39.70
44.00
46.00
50.80
55.00
62.00
71.00
L
D
WALL THICKNESS
MIN MAX
Jam Nut Receptacle with SQ type Shielded B/S & Environmental sealing Grommet & Heat
Shrinkable Option
104.20
107.00
107.00
107.00
118.00
118.00
118.00
118.00
120.00
120.00
120.00
SHELL
SIZE A
-2A THREADS
10SL
14S
16S
16
18
20
22
24
28
32
36
7/8" - 20
1" 1/8-18 UNEF
1' 1/4-18 UNEF
1" 1/4- 18 UNEF
1" 3/8- 18 UNEF
1" 1/2- 18 UNEF
1" 5/8- 18 UNEF
1" 3/4- 18 UNS
2" - 18 UNS
2" 1/4- 16 UN
2" 1/2- 16 UN
UNEF
B
+0.0
-0.15
18.20
24.60
27.40
27.40
30..80
34.20
37.40
40.90
46.70
53.40
59.60
C
24.50
26.80
26.80
32.10
33.70
33.70
33.70
33.70
35.20
35.20
35.20
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
5.20
7.50
7.50
7.50
9.00
9.00
9.10
9.10
8.50
6.50
8.30
E
4.00
4.80
4.80
4.80
4.80
4.80
4.80
4.80
5.60
5.60
5.60
F
+-0.25
31.80
41.30
44.40
44.40
47.60
50.80
54.20
57.20
63.50
69.80
76.20
H
27.00
33.00
38.10
38.10
39.70
44.00
46.00
50.80
55.00
62.00
71.00
L
D
WALL THICKNESS
MIN MAX
Jam Nut Receptacle with EGM B/S for shielded cable & PHM B/S Unshielded cable with sealing rubber bush
107TEGM/PHM
L
A
D
CE
B
S hell style
38
108PG
Q
PG THD
P
L
'A'
MAX. 'L'
MAX.
22.80
25.60
29.20
32.00
32.00
36.50
39.90
43.10
46.60
53.40
60.10
66.30
SHELL
SIZE
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
41.00
41.00
41.00
43.00
53.00
55.00
60.00
60.00
64.00
64.00
70.00
74.00
'P'
MAX.
50.00
50.00
52.00
55.00
57.00
67.00
69.00
74.00
75.00
78.00
85.00
98.00
PG
THD
7, 9, 11
7, 9, 11
11, 13.5
9, 11, 16
9, 11, 16
9, 11, 16, 21
11, 16, 21
13.5, 16, 21
13.5, 16, 21, 29
16, 21, 29
21, 29
21, 29, 36
0
90 Plug connector with PG threaded type B/S suitable for PG Glands
SHELL
SIZE 'A'
MAX. 'L'
MAX.
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
22.80
25.60
29.20
32.00
32.00
36.50
39.39
46.10
46.60
53.40
60.10
36.30
41.00
41.00
43.00
53.00
55.00
60.00
60.00
64.00
64.00
70.00
70.00
74.00
'P'
MAX.
38.00
40.00
41.00
45.00
45.00
48.00
50.00
52.00
56.00
58.00
68.00
70.00
108E
Q
L
P
0
90 Plug connector with Strain Relief B/S & Environmental sealing Grommet
108G SHELL
SIZE
10SL
12S
14S
16S
16
18
20
22
24
28
32
22.80
25.60
29.20
32.00
32.00
36.50
39.90
43.10
46.60
53.40
60.10
41.00
41.00
41.00
43.00
53.00
55.00
60.00
60.00
64.00
64.00
76.00
'A'
MAX 'L'
MAX ‘P'
MAX
46.00
46.20
50.00
52.00
52.00
55.00
58.00
62.00
63.00
65.00
76.00
SHELL
SIZE 'A'
MAX. 'L'
MAX. 'T'
THD
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
22.80
25.60
29.20
32.00
32.00
36.50
39.90
43.10
46.60
53.40
60.10
66.30
41.00
41.00
41.00
43.00
53.00
55.00
60.00
60.00
64.00
64.00
70.00
74.00
5/8-24 UNEF
5/8-24 UNEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 3/16-18 UNEF
1 3/16-18 UNEF
1 7/16-18 UNEF
1 7/16-18 UNEF
1 3/4-18 UNS
2-18 UNS
'P'
MAX.
21.50
21.50
23.00
24.60
24.60
27.00
29.00
31.00
34.00
36.00
44.00
46.00
0
90 Plug Connector
108A=Supplied without grommet
0
90 Plug connector with G type B/S for Heat Shrinkable & Environmental sealing Grommet
A
L
T THD
P
L
P
Q
108R=Supplied with grommet
S hell style
39
108M
P
M THD
L
Q
'A'
MAX. ‘L'
MAX.
22.80
29.20
32.00
32.00
36.50
39.90
43.10
46.60
53.40
60.10
66.30
41.00
41.00
43.00
53.00
55.00
60.00
60.00
64.00
64.00
70.00
74.00
'P'
MAX.
49.50
49.50
49.50
52.00
63.00
65.00
67.00
73.00
75.00
85.00
98.00
M12X1.5
M16X1.5
M16X1.5
M16X1.5
M20X1.5
M25X1.5
M25X1.5
M32X1.5
M32X1.5
M36X1.5
M40X1.5
M
THD
10SL
14s
16s
6
18
20
22
24
28
32
36
Shell
Size
0
90 Plug connector with Metric threaded type B/S suitable for Metric Glands
'A'
MAX. 'L'
MAX.
22.80
25.60
29.20
32.00
32.00
36.50
39.90
43.10
46.60
53.40
60.10
66.30
41.00
41.00
41.00
43.00
53.00
55.00
60.00
60.00
64.00
64.00
70.00
74.00
'P'
MAX.
49.00
51.00
55.00
56.00
56.00
59.00
60.00
63.00
66.00
67.00
75.00
77.00
SHELL
SIZE
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
Q
P
L
108SQ
0
90 Plug connector with SQ type Shielded B/S & Environmental sealing Grommet &
Heat Shrinkable Option
108EGM/PHM
Q
P
L
SHELL
SIZE
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
'A'
MAX. 'L'
MAX.
22.80
25.60
29.20
32.00
32.00
36.50
39.90
43.10
46.60
53.40
60.10
66.30
41.00
41.00
41.00
43.00
53.00
55.00
60.00
60.00
64.00
64.00
70.00
74.00
'P'
MAX.
91.00
91.00
91.00
93.00
93.00
95.00
97.00
99.00
102.00
103.00
111.00
113.00
0
90 Plug connector with EGM B/S for shielded cable & PHM B/S Unshielded cable with sealing rubber bush
S hell style
40
e
All dimensions are in mm
22.8
29.2
32
32
36.5
39.9
43.1
46.6
53.4
60.1
66.3
72.5
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.7
3.7
4.3
4.3
4.3
18.2
23
24.6
24.6
27
29.4
31.8
34.9
39.7
44.5
49.2
55.5
28.1
28.1
28.1
37.6
38.6
38.6
38.6
41
41.8
45
45
45
2.8
3.2
3.2
3.2
4
4
4
4
4
4
4
4
25.4
30
32.5
32.5
35
38
41
44.5
50.8
57
63.5
69.9
d1
Max
Shell
Size
10SL
14S
16S
16
18
20
22
24
28
32
36
40
d2
H13
e
0.1 l1
~l3
0.2 l4
0.3
+
-
+
-
+
-
Panel mounting plug connector
97B - 3164 97B-4164
L3 L4
L4
d 2 e
L1
LP
S hell style
41
Q
L
VA
Q
L
A
Solid backshell without grommet and sleeve
Class A
Solid Backshell With Grommet & Sleeve
Class R
All dimensions are in mm
Connector
Size
47 48
47 ---
55 ---
47 48
55 ---
47 48
55
56
57 57
57 57
57 57
57 57
57 57
58.25 60
58.25
58.25 60
60
21.505/8-24 NEF 20.35
20.35
23.40
23.40
11/16-24 NEF
11/16-24 NEF
26.717/8-20 UNEF
3/4-20 UNEF
3/4-20 UNEF
7/8-20 UNEF 26.71
29.50
35.70
1-20 UNEF
35.85
1 1/8-18 NS
44.40
1 1/4-18 NEF
1 3/8-18 NEF 45.081 5/8-18 NEF 52.36
56.81
64.50
2 5/16-16 UN
10SL
12S
14S
14
12
16S
16
18
20
22
24
28
32
36
A Thread L max
for MS L max
for 97B
Q
max
class 2B
in inches
All dimensions are in mm
Connector
Size
32.54 37.60 19.05
37.31 --- 19.84
46.83 --- 19.84
36.51 37.64 22.22
46.83 --- 22.22
37.70 38.83 25.40
48.02 48.00 25.40
50.80 51.58 28.57
53.97 54.75 31.75
53.97 54.75 34.92
57.15 57.94 38.10
57.15 57.94 44.45
59.0 59.78 51.75
60.32
71.80 61.13
80.00 57.15
63.50
5/8-24 UNEF
5/8-24 UNEF
5/8-24 UNEF
3/4-20 UNEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 3/16-18 UNEF
1 3/16-18 UNEF
1 7/16-18 UNEF
1 7/16-18 UNEF
1 3/4-18 UNS
2-18 UNS
2 1/4 - 16 UN
10SL
12S
14S
14
12
16S
16
18
20
22
24
28
32
36
L max
for MS L max
for 97B Q
max V
Thread
in inches
5/8-24 NEF
11/16-24 NEF
11/16-24 NEF
7/8-20 UNEF
3/4-20 UNEF
3/4-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 1/8-18 NS
1 1/4-18 NEF
1 3/8-18 NEF
1 5/8-18 NEF
2 5/16-16 UN
A Thread
in inches
Note - Both versions, straight and diamond knurling available on back accessories. For details, contact factory.
40
40
For Plug type For Receptacle
1 7/8-16UN
2 1/16-16UN
1 7/8-16UN
2 1/16-16UN
B ack accessory
42
Back Accessories
Strain relief backshell with grommet and sleeve
Class E and F
Right Angle Backshell With Or Without Grommet
Class A, F & R
L
A
N
All dimensions are in mm
Connector
Size
37.60
37.80
47.30
39.40
48.90
42.60
52.10
53.70
58.80
58.80
63.60
63.60
69.60
72.8072.80
76.00
45.00 25.00
25.00
25.00
27.00
27.00
28.00
28.00
31.00
34.00
34.00
37.00
39.00
45.00
48.00
22.22
25.40
25.40
28.57
28.57
31.75
31.75
34.13
37.30
40.48
43.66
50.00
56.50
62.71
---
---
47.00
---
48.00
57.00
58.00
61.00
61.00
66.00
66.00
72.00
75.00
78.00
5/8-24 UNEF
5/8-24 UNEF
5/8-24 UNEF
3/4-20 UNEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 3/16-18 UNEF
1 3/16-18 UNEF
1 7/16-18 UNEF
1 7/16-18 UNEF
1 3/4-18 UNS
2-18 UNS
2 1/4 -16 UN
10SL
12S
14S
14
12
16S
16
18
20
22
24
28
32
36
L max
for MS L max
for 97B L1
max Q
max V
Thread
in inches
All dimensions are in mm
Connector
Size
54.07
55.90
55.90
64.41
65.94
67.41
67.41
73.28
73.28
74.75
74.7574.75
86.0
54.07 59.10
---
61.34
62.86
71.10
72.55
72.55
76.82
77.82
77.64
125.0
21.97
21.97
25.15
28.45
28.45
30.76
37.29
37.29
44.45
52.22
44.45
57.15
67.10
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
L max
for MS L max
for 97B N
max
5/8-24 NEF
11/16-24 NEF
7/8-20 UNEF
3/4-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 1/8-18 NS
1 1/4-18 NEF
1 3/8-18 NEF
1 5/8-18 NEF
2 5/16-16 UN
A Thread
class 2B
in inches
5/8-24 NEF
11/16-24 NEF
11/16-24 NEF
7/8-20 UNEF
3/4-20 UNEF
3/4-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 1/8-18 NS
1 1/4-18 NEF
1 3/8-18 NEF
1 5/8-18 NEF
2 5/16-26 UN
A Thread
class 2B
in inches
L
AV
Q
L1
Note - Both versions, straight and diamond knurling available on back accessories. For details, contact factory.
40
40
55.00 62.71
1 7/8-16UN
2 1/16-16UN
1 7/8-16UN
2 1/16-16UN
B ack accessory
43
Shell size A Min. BL Max.
10SL
12S
14S
16S
16
18
20
24
28
7.70
8.20
10.60
13.50
14.60
18.70
24.60
27.00
22.30
24.80
28.50
35.10
34.50
41.00
22 20.80
44.80
27.00
29.50
33.50
35.70
34.00
34.10
C- THD
3/4-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 1/8-18 NEF
1 1/4-18 UNEF
1 3/8-18 NEF
1 5/8-18 NEF
32
36
40 38.50
48.20
33.30 51.50
56.00
62.00
34.20
34.20
36.60
1 7/8-16 UN
2 1/16-16 UN
2 5/16-16 UN
20.30 30.00 5/8-24 NEF
Heat Shrink
Boot adaptor (G)
Back Accessories
Cable clamp
MS-3057
Use MS-3420 sleeves
C
B
A
Part number
MS-3057-4A 10SL, 12S 20.90 21.39 7.94 5/8-24
MS-3057-6A 14, 14S 21.59 25.27 11.11 3/4-20
MS-3057-8A 16, 16S 23.37 28.45 14.29 7/8-20
MS-3057-10A 18 23.37 30.89 15.87 1-20
MS-3057-12A 20,22 23.07 35.03 19.50 1 3/16-18
MS-3057-16A 24,28 25.78 42.75 23.81 1 7/16-18
MS-3057-20A 32 28.00 51.00 31.70 1 3/4-18
MS-3057-24A 36 29.36 57.02 34.92 2-18
Shell
size Max OD
of cable A B C Thread
in inches
All dimensions are in mm
5.59
7.92
11.10
14.27
15.87
19.05
23.80
31.75
A
L
3.50+0.20
C
B
B ack accessory
44
Ordering Information
MS - XX-PGYY
Where XX- Shell Size
YY-PG-Thread Size
PG Adaptor
Shell
size G Thread
in inches PG 9 LLLLLLLA
30 21 26 30
35 26
26 37
40 30
35
35 28
28 40
40 35
35
38
45 37 45 45
57 44 55 57 57 55
4545
35
35
35
40
40
40 40 40 40
28 37
302525302525
23 23 30 23 23 30
AAAAAABBBBBBB
10SL 5/8-24
11/16-24
3/4-20
7/8-20
1-20
1 1/8-18
1 1/4-18
1 3/8-18
2 1/8-18
1 5/8-18
12S
14
16
18
20
22
24
28
36
PG 11 PG 13 PG 16 PG 21 PG 29 PG 36
G
L
PG
B
A
‘O’ Ring
Shell size G Thread in inches EGM/PHM 11 EGM/PHM 21
10SL
12SL
14
16
18
20
22
32
36
5/8”-24
25.00 37.00 27.00 41.00
11/16”-24
3/4”-20
7/8”-20
1”-20
1.1/8”-18
1.1/4”-18
1.29/32”-18
2.1/6”-18
25.00
25.00
25.00
29.00
31.50
35.00
35.00
52.00
24 1.3/8”-18
52.00
37.00
37.00
40.00
40.00
52.00
60.00
60.00
70.00
70.00
27.00
27.00
27.00
31.00
33.50
35.00
35.00
52.00
52.00
41.00
41.00
43.00
43.00
55.00
60.00
60.00
70.00
70.00
D D
L L
EGM/PHM
Backshell Accessories
Note:- Rubber Bush supplied in Packing
In case of PHM inner metal Furrele is not required/supplied
GL
D
‘O’ RING EGM INNER METAL FERRULE
PLASTIC CDMB
RUBBER BUSH
EGM BACKSHELL GLAND NUT
EGM/PHM11 Can accept cable Min. 5.70 mm & Max. 10.85 mm
EGM/PHM21 Can accept cable Min. 12.70 mm & Max. 17.85 mm
B ack accessory
45
Rubber bushing. Protects wire bundles and unjacketed cables from possible damage by cable clamp.
Neoprene Sleeve
MS-3420
D
F
E
450
B
A
C
All dimensions are in mm
Part number
MS-3420-3 3.30 5.33 9.50 73.02 0.79
MS-3420-4 5.59 7.67 12.70 69.85
MS-3420-6 7.92 10.84 15.59 66.67
MS-3420-8 11.10 14.02 18.77 63.50
MS-3420-10 14.27 15.62 21.94 60.32
MS-3420-12 15.87 18.80 26.23 56.20
MS-3420-16 19.05 23.54 26.39 53.97
MS-3420-20 23.80 31.50 40.41 50.80
MS-3420-24 31.75 34.67 46.79 47.62
AB C DE Rad
in inches F Rad
in inches
0.79
0.79
1.59
1.59
1.59
1.59
1.59
1.59
0.79
0.79
1.59
1.59
1.59
1.59
1.59
1.59
1.59
Plain Flat Gasket
For MS and 97B flange mounted receptacles
All dimensions are in mm
Part number
MS-101000 10SL 15.90 25.40 4.35
4.35
4.35
4.35
5.15
5.15
5.15
5.15
5.15
5.55
5.55
5.55
27.80
30.15
32.50
34.90
38.10
41.20
44.45
50.80
57.15
63.50
69.85
18.26
20.62
23.01
24.61
27.00
29.36
31.75
34.90
39.70
44.45
49.22
55.77
19.05
22.20
25.40
28.57
31.75
34.90
38.10
44.45
50.80
55.57
61.92
12S & 12
14S & 14
16S & 16
18
20
22
24
28
32
36
40
MS-108686
MS-101001
MS-101002
MS-101003
MS-101004
MS-101005
MS-108687
MS-101007
MS-110831
MS-101006
MS-108688
Shell size A max B C D T
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
T
B
D
4 HOLES
O
A
A
C
C
O
B ack accessory
46
Protective Cap For 97B Series
97B-25043
For Receptacle
SHELL
SIZE 'D'
+ 0.60/-0
'A'
MAX. 'E'
MIN.
10 SL
14 S
16 S
16
18
20
22
24
28
32
36
40
23.0
30.0 16.0
20.70
4.30
5.50
32.50
37.0
40.50
43.50
47.0
54.0
60.50
67.0
73.0
90.0
100.0
115.0
160.0
'B'
+ 0.20
All dimensions are in mm
INK MARK A CONN. NO. &
BATCH CODE AS PER BOM.
'D'
'B'
+ ONE LINK
'E'
'A'
97B-25042
For Plugs
All dimensions are in mm
'D'
'B'
+ ONE LINK
'E'
'A'
SHELL
SIZE 'B'
MAX. 'D'
+ 0.60/-0
'A'
MAX. 'E'
MIN.
10 SL
14 S
16 S
16
18
20
22
24
28
32
36
40
21.0
27.50 23.50
31.50
4.30
5.50
30.0
33.50
37.0
40.0
43.0
49.50
56.0
62.50
73.0
90.0
100.0
115.0
130.0
190.0
INK MARK A CONN. NO. &
BATCH CODE AS PER BOM.
4.70
Note :- Please add 07 suffix for bigger end link. Applicable for Jam Nut
P rotective cap for 97B
L
D
C
A
B
16S
16
12
8
4
0
1.59
1.59
2.39
3.60
5.70
9.05
3.10
3.10
4.78
7.85
11.10
15.00
1.72
1.72
2.51
4.57
7.15
11.90
26.00
30.50
36.60
40.70
40.70
44.45
CONTACT
SIZE 'A' 'B' 'C'
2.60
2.60
3.96
6.75
9.50
13.90
'D' 'L'
CONTACT
PART NO
97B - 106433
97B - 108295
97B - 109388
97B - 108386
97B - 108384
97B - 112067
47
Pin - Male Crimp Contact
Contact Size 12, 16, 16S
Contact Size 0
Contact Size 4
Contact Size 8
16S
16
12
8
4
0
3.10
3.10
4.78
7.85
11.10
15.00
1.72
1.72
2.51
4.57
7.15
11.90
26.30
34.20
37.00
37.00
40.00
44.45
CONTACT
SIZE 'B' 'C'
2.60
2.60
3.96
6.75
9.50
13.90
'D' 'L'
CONTACT
PART NO
97B - 108456
97
97
97
97
97B - 108457
B - 110262
B - 108387
B - 111878
B - 112068
C rimp Contact Details
Socket - Female Crimp Contact
48
Q
S SQ
R SQ
L
KM
A
37.75
37.75
37.75
37.75
51.40
51.40
51.40
51.40
51.40
51.40
51.40
51.40
'R'
+-0.10
18.20
20.60
23.00
24.60
24.60
27.00
29.40
31.80
34.90
39.70
44.50
49.20
SHELL
SIZE
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
18.21
21.40
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
2.79
3.20
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
14.20
14.20
14.20
14.20
19.00
19.00
19.00
19.00
20.60
20.60
22.20
22.20
25.40
28.00
30.00
32.50
32.50
35.00
38.00
41.00
44.50
50.80
57.00
63.50
'A'
+0.0
-0.15 'K'
+-0.20 'M'
+0.41
-0.0 'S'
+-0.20 'L'
MAX.
18.19
21.30
24.59
30.78
34.16
37.36
40.87
46.68
53.36
59.56 22.20
3.99 3.73
oD
+0.0
-0.13
'K'
+-0.38
-0.0 'M'
+0.18 Q
+-0.10
-0.0
M5
Q1
18.21
20.60
23.01
27.0
29.39
31.80
34.90
39.70
44.50
49.20
S
+-0.13
25.40
28.05
30.0
35.05
38.0
40.99
44.45
50.80
57.10
63.50
R
+0.18
0.20 33.32
36.20
39.67
46.02
50.80
53.98
60.32
66.68
76.20
84.12
T
+0.23
-0.25
SHELL
SIZE
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
27.38
14.20
19.0
20.60
2.79
3.20 3.23
4.32
M4 32.51 24.61 42.87
18.19
21.30
24.59
30.78
34.16
37.36
40.87
46.68
53.36
59.56 22.20
3.99 3.73
oD
+0.0
-0.13
'K'
+-0.38
-0.0 'M'
+0.18 Q
+-0.10
-0.0
M5
Q1
18.21
20.60
23.01
27.0
29.39
31.80
34.90
39.70
44.50
49.20
S
+-0.13
25.40
28.05
30.0
35.05
38.0
40.99
44.45
50.80
57.10
63.50
R
+0.18
0.20 33.32
36.20
39.67
46.02
50.80
53.98
60.32
66.68
76.20
84.12
T
+0.23
-0.25
SHELL
SIZE
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
27.38
14.20
19.0
20.60
2.79
3.20 3.23
4.32
M4 32.51 24.61 42.87
FLANGE RELATIVE TO
HOLES
EQUAL WITHIN 0.38
(8 PLACES)
‘S’ SQ
Q1 ‘A’
‘T’ ‘K’ ‘M’
‘A’
‘R’ SQ. (4 HOLES)
Q
‘D’
Dummy Receptacle Rear Side Closed
Thru Bulkhead Receptacle
Dummy Receptacle Rear Side Open (Hollow)
SECTION ‘A-A’
‘A’
Q1
‘D’
FLANGE RELATIVE TO
HOLES EQUAL WITHIN
0.38 (8 PLACES)
‘S’ SQ.
‘K’ ‘M’
‘R’ SQ. ‘Q’
‘T’ ‘A’ (4 HOLES)
ORDERING INFO
97B-3105-XX-CF CF-CLOSED FLANGE
HF-HOLLOW FLANGE
ORDERING INFO
TBH-97BS-XX-YY PS
PIN & SOCKET CONTACT
INSERT ARRANGEMENT
THRU BULKHEAD SERIES
SERIES DESIGNATION
SHELL SIZE
DESIGNATION FOR
DUMMY RECEPTACLE
SERIES DESIGNATION
49
MS/97B Connector- Accessories
Crimp contact
Contacts for MS/97B connectors are machined from copper alloys and silver plated for maximum corrosion
resistance, with a minimum millivolt drop and a maximum current carrying capacity; the size 16 and 12 socket
contacts are of the closed entry design. Gold plated contacts are also available.
* Solder contacts are not sold as separate items. Part numbers shown here are for crimp contacts only.
** When using wire adapter sleeve shown.
*** Contact rating as stated are test ratings only. The connecter may not withstand full rated current through all
contacts continuously. Please note that the electrical data given is not an establishment of electrical safety factors.
This is left entirely in the designer`s hands as he can best determine which peak voltage, switching surges,
transients, etc. can be expected in a particular circuit.
When proprietary crimp contacts are employed rather than the standard MS
approved solder contacts, the following application tools are recommended for use.
There is a possibility of additional crimping tools other than those included being
available at present or in the future for this specific application.
TOOLING CHART
Crimping
Tool
M22520/1-01
M22520/1-01
**
**
**
Positioner/
Turret
*
*
**
**
**
MS/97B
Application tools
Connectors
* Use Daniels Turret TH29-1 or Astro Tool Co. Turret 616266
** For appropriate crimp tool and positioner refer to Pico Crimping Tool Co.
† Tools used with Arbor Press 11-7364
Part Number
For Crimp Contacts
only*
Pin/
Socket
Pin
Socket
Pin
Socket
Pin
Socket
Pin
Socket
Pin
Socket
Pin
Socket
Mating End
Size
16 Short
16 Long
12
8
4
0
Wire Barrel
Size
16
16
12
8
4
0
Allowable
Wire size
16
18
60
22**
16
18
20
22**
12
14
8
10**
4
6**
0
1
2**
Test Current***
Amps
13
10
7.5
5
13
10
7.5
5
23
17
46
33
80
60
150
125
†
MS-106433
MS-108456
MS-108295
MS-108457
MS-108388
MS-110262
MS-108386
MS-108387
MS-108384
MS-111878
MS-112067
MS-112068
Insertion/Removal
Tool
97B-IR-16
97B-IR-16
97B-IR-12
97B-IR-8
97B-IR-4
97B-IR-0
PC- Premating
contact designation
See pages 8 to 18
Alternate positions
W - X - Y - Z
(No suffix - Normal)
See insert orientations on page 6.
MS 3 100 A-
- - - - -18 19 P PCW
3 - Solder
4 - Crimp
To obtain the specific connector required, write down the connector number from the typical example below. Only inserts
shown in the availability chart shown on page 7 can be specified. Connectors are delivered with protective plastic dust
covers. Include premating contact designation only if premating contact is required. The second letter in the premating
contact designation stands for the actual contact position. B at the end of the connector number indicates telescopic
bushing provided.
MS - Threaded version
97B - Bayonet version
Series designation
Insert arrangement
See pages 7 to 18
Shell size
10S, 10SL, 12S, 12, 14S,
14, 16S, 16, 18, 20, 22,
24, 28, 32, 36.
Connector Modification
Contact type
P - Pin contacts
S - Socket contacts
Standard - Silver plating
Note : Contact factory for gold
plating part number.
Shell style
100 - Wall mounting
receptacle
Cable connecting
receptacle
Back box mounting receptacle
(Do not accept accessory)
Box mounting receptacle (Do not
accept accessory)
101 -
102E -
103 -
Straight plug to accept the
accessory (Replace X with
suitable accessory)
106 -
108 -
105A
107 - Jam nut Receptacle (Do not
accept accessory)
107X Jam nut Receptacle to accept
accessory (Replace X with
suitable accessory)
Straight plug connector without
accessory & serration
-
-
103X Back Box Mounting Receptacle
-
50
Ordering MS/97B series
to accept the accessory (Replace X with
suitable accessory)
105 -
Dummy receptacle
Right angle plug connector
Connector class (Accessory/Backshell)
A -Solid Backshell suitable for straight Plug
AG - Solid Backshell with Enviromental sealing Grommet
F - Strain relief Backshell with Enviromental sealing Grommet (E & F are
same)
R- Shorter length Backshell with Environmental sealing grommet
PGXX - PG Threaded Backshell to accept the PG gland (Replace XX with
suitable thread size)
MXX - Metric Threaded Backshell to accept the Metric gland (Replace XX
with suitable thread size)
G- Backshell suitable for heat shrink tubing with Environmental sealing
Grommet
SQ- Backshell suitable for heat shrink tubing & shielding with
Environmental sealing Grommet
EGM- Backshell with Metal ferrule suitable for shielded cable to suit
variable cable sizes
PHM- Backshell with out Metal ferrule suitable for unshielded cable to suit
variable cable sizes
RT- Right angle Backshell suitable for 100,101,103X Style
Note: Connector 3103 supplied in two types. Connector with rear end
thread to accept backshell & without rear end thread. To order 3103
without rear end thread do not add any connector class such as
( A,E,F,R...) & hence it is similar to 3102 with Back Box mount
For e.g 97B-3103-18-1P-622 Connector without thread
Standard connector supplied with Cadmium plating with
Olivedrab Chromate Green conductive Finish
622 - Cadmium Free Zinc Cobalt Green conductive Finish
(RoHS Compliant)
624 - Cadmium Free Zinc Cobalt Black conductive Finish
(RoHS Compliant)
726 - Electrophoratic Black Non conductive finish (RoHS
Compliant)
A23 - Electoless Nickel Finish (RoHS Compliant)
9 - No solder Filling to contact applicable only for MS connector
(100/102/103)
563 - 0.5 micron gold plated contacts (standard silver plated
contacts)
97BS - If added to receptacle part number connector supplied
with SS wear pin
97BS - If added to Plug part number connector supplied with
Roller Stud (Shell Size 18-40)
B - Strain relief BIS supplied with M3420 bushing
CXX - Crimp contact suitable XX AWG size
F0/LC - Less contacts
F42 - Less grommet & backshell
HD - Heavy duty coupling ring
RFI - Plug conn with grounding fingure
SQG - Square flange gasket applicable to receptacle for
(100/102/103)
SR - MS3057 - XXA Cable Clamp
SRC - MS3057 - XXC Cable Clamp
T 00 - Metric THD holes in Flange Applicable for
PTC9 - PC Tail Connector (Refer Page 25)
PTC9
-
Notice : All information, including illustrations given herein is believed to be accurate at the time of printing. In lieu of design advances,
Amphenol reserves the right to change specifications without notice. This publication ACRMS02 03/13 MS AND 97B Series
Connectors supercedes all existing Amphenol literature on MS AND 97 B Series Connectors.
NORTH AMERICA
Amphenol Fiber Systems International
1300 Central Expressway North
Suite 100 Allen,Texas 75013, USA
Tel: +1-214-547-2400
Fax: +1-214-547-9344
Amphenol PCD
72 Cherry Hill Drive
Beverly, MA 01915 USA
Tel: +1-978-624-3400
Fax: +1-978-927-1513
info@amphenolpcd.com
www.amphenolpcd.com
www.backshellworld.com
Sales & Product Support
40-60, Delaware Avenue
Sidney, NY 13838-1395
Tel: +1-607-563-5011
Fax: +1-607-563-5357
Amphenol Aerospace Operations Amphenol Canada
Meford Drive
Scarborough,
Tel: +416-291-4401
Fax: +416-292-0647
ON MIB 2X6
France
Amphenol Socapex S.A.S.
948,Promenade de I'Arve
Bp29, Thyez Cedex
74311, France
Tel: +33-4-5089-2800
Fax: +33-4-5096-1941
Amphenol Air-LB
Immeuble Le Doublon
11, Avenue Dobonnet
Courbevoice-Cedex
92407, France
Ph: +33-1-4905-3000
Fax: +33-1-4905-3043
Germany
Amphenol-Air LB GmbH
Am Kleinbahnhof 4
Saarlouis
D-66740, Germany
Tel: 49-6831-9810-00
Fax: 49-6831-9810-30
Holland
Amphenol Benelux
Zadelmaker 121
NL-2401 PD Alphen
aan den Rijn Holland
Tel:+31-172-444903
Fax:+31-172 240254
United Kingdom
Amphenol Limited
Thanet Way, Whitstable
Kent CT5 3JF, England
Tel: +44-1227-773-200
Fax: 44-1227-276-571
Italy
Via Barbaiana 5
20020 Lainate (Milano)
Italy
Tel :+39-02-93254.209
+39-02-93254.214
Fax:+39-02-93254-444
Center & East Europe
Amphenol
Wiener Gasse 68
2380 Perchtoldsdorf
Tel: +43-699-10396071
Fax: +43 699 40396071
EUROPE
ASIA China
Amphenol PCD Shenzhen
3/F Building, A4 Songbai
Industrial Park
East Road of Minghuan
Gongming Town, Baon District
Shenchen, China
Tel: +86-755-8173-8000
Fax: +86-755-8173-8180
Japan
Amphenol Japan
471-1, Deba, Ritto City
Shiga 520-3041, Japan
Tel: +81-77-553-8501
Fax: +81-77-551-2200
Korea
Amphenol Daeshin Electronics
558 SoSa, SongNae, Bucheon-City
Kyunggi-Do, Korea 420-130
Tel: +82-32-610-3800
Fax: +92-32-673-2507
Singapore
Amphenol East Asia Ltd.
72 Bendemeer Road
# 03-33 Luzerne
Singapore 339 941
Tel: 65-6294-2128
Fax: 65-6294-3522
Amphenol Interconnect India Pvt. Ltd.
61 Electronics City
Bangalore-560 100, India
Ph: +9180-2852-3838
Fax: +9180-2852-0418
Amphenol Interconnect India Pvt. Ltd.
105 Bhosari Industrial Area
Pune-411026, India
Tel: +9120-3068-8305
Fax:+9120-2712-9158
India
ROW
Australia
Amphenol Australia Pty Ltd
2 Fiveways Boulevard
Keysborough
VIC 3173
Ph: +61-3-8796-8888
Fax: +61-3-8796-8801
Africa
Amphenol South Africa
30 Impala Road
2196 Sandton-Chistlehurston
South Africa
Tel: +27-11-783-9517
Fax: +27-11-783-9519
Russia
Amphenol Russia
8-2 Yaroslavskaja Str
129164 Moscow, Russia
Tel: +7-495-937-6341
Fax: +7-495-937-6319
Maslak
34396 Istanbul
Tel: +90-212-335-2501
Fax: +90-212-335-2500
Israel
Bar-Tec Ltd.
P.O. Box 279
Kfar Sava, 44102 Israel
Tel: +972-9-7644100
Fax: +972-9-7674324
Brazil
Amphenol do Brasil Ltda
Rua Diogo Moreira 132
CEP 05423-010
Sao Paulo-SP, Brazil
Tel: +55-11-3815-1003
Fax: +55-11-3815-1629
Argentina
Amphenol Argentina
Avenida Callao 930
2nd Floor,Office B Plaza
C1023AAP Buenos Aires
Argentina
Tel: 54-11-4815-6886
Fax: 54-11-4814-5779
Austria
Amphenol Austria
Wiener Gasse 68
2380, Erchtoldsdarf,
Austria
Tel : + 43-69910396071
Fax: + 43-69940306071
Spain
Amphenol Iberica
Edificio Burgosol Oficina
N 55 C/Comunidad de
Madrid 35 bis -
Tel: +34-91-6407302
+34-91-6407306
Fax:+34-91-6407307
Las Rozas (Madrid)
Sweden
Amphenol
Industrial and Military &
Aerospace
Nordic & Baltic
Military Phone/
Mobile+46702129200
Industrial +46 767909560
www.amphenol-in.com
105, Bhosari Industrial Area,
Pune - 411 026.
Tel.: 91-20-30688303, 30688304
Fax : 91-20-30688321
Email : vbhavsar@amphenol-in.com
sales@amphenol-in.com
Export
105, Bhosari Industrial Area,
Pune - 411 026, India.
Tel.: 91-20-30688305, 30688353
Fax : 91-20-27129158
Email : svpatil@amphenol-in.com
4931, 11th Floor, High Point IV
45, Palace Road, Bangalore 560 001.
Tel.: 91-80-22281392, 22281002
Fax : 91-80-22253859
Email : kmanoj@amphenol-in.com
MARKETING
HEADQUARTERS Southern Region Northern and Eastern Region
1414, 14th Floor, Chiranjiv Tower,
43, Nehru Place, New Delhi - 110 019.
Tel. : 91-11-26449177
Telefax : 91-11-26449176
Email : sunily@amphenol-in.com
107, 1st Floor, ‘Am Sri Classic’,
Sarojinidevi Road, Secunderabad - 500 003.
Telefax : 91-40-66332906
Email : pprasad@amphenol-in.com
Central Region
105, Bhosari Industrial Area,
Pune - 411 026.
Tel.: 91-20-27119735, 30688334
Fax: 91-20-27120581, 27119735
Email : sunilp@amphenol-in.com
Western Region
Our offices in India:
Pune Operations Bangalore Operations
