Advanced Industrial Automation
» Sealed to stringent IP54 standard
» On-board PLC functionality and intelligence
» Sturdy metal housing
VARISPEED E7Z IP54 INVERTER
Built for the toughest conditions
Inside the E7Z IP54’s tough exterior lies a world of advanced
technology offering you a host of new possibilities. Like CASE
(customised application software) for customised control
without need of any extra option boards. Like PLC functionality
that provides on-board intelligence for standalone applications
independent of an external controller. Or like communication
with external world allowing you to fully control operation
remotely from your standalone application.
Omron’s E7Z IP54 is a true work-anywhere pump
and fan inverter that will survive virtually anything
you care to throw at it. A rugged metal housing
and ventilation system meeting the stringent IP54
standard provides outstanding protection from non-
conductive dust and splash damage. Maintaining the
inverter electronics in a controlled environment and
guaranteeing long, trouble-free operation.
Rugged & reliable standalone
pump and fan inverter
Extreme tough
metal housing
Digital operator
panel
Easy door lock
only two screws
Solid wall
mount panel
Lots of space inside
for easy wiring
Bottom view
E7 IP54 benefits
The work-anywhere inverter:
• Reliable operation even in the harshest conditions thanks
to IP54 housing
• Easy cable connections thanks plenty of space inside housing
• Screw-mountable anywhere within your plant
• Easy viewing of inverter states with ruggedized LCD front panel
• Conforms to EMC requirements thank to the unit’s built-in
industrial filter
• Minimised harmonic distortion with 12-pulse input
• Silent operation with no need for current de-rating in silent mode
With intelligence on-board:
• PLC functionality for standalone operation with optional PLC card
• Simple, direct connection to high-level control systems via Modbus,
DeviceNet, ProfiBUS, CANopen and HVAC Fieldbus
• Inverter Customised application software avoiding the use
of external controllers
• Optimum economy with advanced energy-saving algorithm
Advanced Industrial Automation
A new world of possibilities with PLC functionality
• Distributed I/Os for standalone operation
You can allocate up to 256 I/Os (digital or analogue) controlled
via Omron’s Compobus Network. These allow you to connect
a broad range of sensors Giving you total independence from
your main control room.
• Dnet communications
The PLC option board provides communication with the outside
world thanks to the Dnet slave availability.
• Wired or GSM connectivity
You can gather all the information you need to monitor and
manage your installation from your PC or arrange alarms and
warnings to be transmitted to your mobile phone.
• Settings easily updated with HMI
Via the PLC option board serial port, you can easily update your
settings and get information locally through an HMI terminal.
Designed from one viewpoint… yours!
Customised application software fully adaptable to your needs
Our software engineers are in continuous contact with
customers – discovering their needs and refining special
software to meet them. As a result, E7Z inverter software is fully
customisable to your requirements.
• Built-in pump sequencer ensures optimum pump action
Providing optimum control and economy, the built-in pump
sequencer automatically switches-in auxiliary pumps to support
the main (PID-controlled modulated) pump to meet increased
flow demand. It also provides automatic auxiliary-pump cycling
for balanced operation.
Other important features include:
• Pressure feedback signal: 0 – 10 V sensor, 0 – 20 mA
• 4 – 20 mA OR inverted sensor
• Modulated pump automatic frequency drop and rise
• Specific fault and alarm messages
• Pump override eliciting automatic/manual emergency
mode-operation
• Test operation
Water level
detector
Intrusion sensing
detector
PLC
Option board
Compobus S
1Varispeed E7
CIMR-E7Z
Varispeed E7
Frequency inverter for pumps and fans
• Energy saving function.
• Advanced PID controller with dedicated HVAC func-
tions.
• 12 pulse operation for harmonics reduction.
• Speed search.
• Standard RS-485 communication - MODBUS.
• Optional network cards
(DeviceNet, PROFIBUS, CANOpen, LONWORKS).
• CE, UL, and cUL marked and Germanischer Lloyds
approval.
• Embedded OMRON PLC functionality with
PLC option card
• PC configuration tool CX-drive.
• CE, UL, and cUL marked and Lloyds approval.
E7IP54
• Robust metal chassis.
• LCD operator.
• Built in RFI filter.
Customized software
• The inverter software can be customized to meet
specific application. Examples:
• Pump sequencer (S-8801).
*For detailed information please refer to CASE software section.
Ratings
• 200 V Class 0.4 to 110 kW.
• 400 V Class 0.4 to 300 kW.
System configuration
C22
R52
C24
PE
C16
U11
U8
R6
C26C28
JP3
U6
U7
T1
U9
+
+
R15
R15
R25
R15
R20
R30
R7
R5
C5
R21
U14
C17
R14
R28
RR11
JP1
C1
U10
C3
R5
R1
R2
R36
R3
C21
R35
R70
R120
R75
R78
R114
C2
2
+
+
U1
+
C35 R99
U12
R95
R39
R40
R57
R56
D6
R6
U15
R54
R55
R8
TR2
11
R11
R110
R107
R113
TR1
C13
U13
C10
SI-N
CODE No.
U17
73600-C0210
JP5JP6
RT4
R10
R10
R105
R102
C12
C11
R94
R97
R96
C20
R95
C39
R131
Y1
U10
C33
Communication card PLC option card
3G3IV-PCN329-E
Inverter to PC cable
3G3IV-PCN126/326
Digital operator
extension cable
JVOP-161-OY
Digital operator
(LED display)
JVOP-160 OY
Digital operator
(LCD display)
CX-Drive
Line filter
LKEB_ braking
resistor unit
CDBR_B
braking unit
Braking accessories
Varispeed E7
* E7 IP54 types are built-in filter inverters.
*see note
Varispeed E74
2 Frequency inverters
Type designation
200 V class
400 V class
Model CIMR-E7Z@20P4 20P7 21P5 22P2 23P7 25P5 27P5 2011 2015 2018 2022 2030 2037 2045 2055 2075 2090 2110
Max. applicable motor
output1
1. Standard 4-pole motors are used for max. applicable motor output. Choose the inverter model whose rated current is allowable within the motor rated
current range.
2. A 3-wire transformer is required on the power supply for 12-phase rectification.
Kw 0.55 0.75 1.5 2.2 3.7 5.5 7.5 11 15 18.5 22 30 37 45 55 75 90 110
Output
characteristics
Inverter capacity kVA 1.2 1.6 2.7 3.7 5.7 8.8 12 17 22 27 32 44 55 69 82 110 130 160
Rated current A 3.2 4.1 7.0 9.6 15 23 31 45 58 71 85 115 145 180 215 283 346 415
Max. voltage 3-phase; 200, 220, 230, or 240 VAC (proportional to input voltage)
Max. output frequency 200.0
Power
supply
Rated input voltage and
frequency
3-phase, 200/208/220/230/240 VAC, 50/60 Hz
Allowable voltage
fluctuation
+ 10%, - 15%
Allowable frequency
fluctuation
±5%
Harmonic
wave
prevention
DC reactor Optional Built in
12-pulse input Not possible Possible*2
Model CIMR-E7ZZ@
40P4 40P7 41P5 42P2 43P7 44P0 45P5 47P5 4011 4015 4018 4022 4030 4037 4045 4055 4075 4090 4110 4132 4160 4185 4220 4300
IP54 model: CIMR-E7Z --- --- --- --- --- --- ---
47P52
40112 40152 40182 40222 40302 40372 40452 40552
--- --- --- --- --- --- --- ---
Max. applicable motor
output1
1. Standard 4-pole motors are used for max. applicable motor output. Choose the inverter model whose rated current is allowable within the motor rated
current range.
2. A 3-wire transformer is required on the power supply for 12-phase rectification
* To agg 400 V class
Kw 0.55 0.75 1.5 2.2 3.7 4.0 5.5 7.5 11 15 18.5 22 30 37 45 55 75 90 110 132 160 185 220 300
Output
characteristics
Inverter capacity kVA 1.4 1.6 2.8 4.0 5.8 6.6 9.5 13 18 24 30 34 46 57 69 85 110 140 160 200 230 280 390 510
Rated current A 1.8 2.1 3.7 5.3 7.6 8.7 12.5 17 24 31 39 45 60 75 91 112 150 180 216 260 304 370 506 675
Max. voltage 3-phase; 380, 400, 415, 440, 460, or 480 VAC (proportional to input voltage)
Max. output frequency 200.0
Power
supply
Rated input voltage and
frequency
3-phase, 380, 400, 415, 440, 460 or 480 VAC, 50/60 Hz
Allowable voltage
fluctuation
+ 10%, - 15%
Allowable frequency
fluctuation
±5%
Harmonic
wave
prevention
DC reactor Optional Built in
12-pulse input Not possible Possible*2
CIMR – E7 Z 4 0P4 0
Inverter Protective enclosure
0: Open chassis type (IP00)
1: Enclosed type (IP20 / NEMA 1)
2: Enclosed type (IP54)
Max. applicable motor output
0P4: 0.4 kW
022: 22 kW
300: 300 kW
E7 series
Specifications
Z: European standard
specifications
Voltage
2: 200 V class
4: 400 V class
"P" indicates a decimal
point
[ ]
~
~
Frequency inverters 5
Varispeed E7 3
Enclosures
Commom specifications
Model CIMR-E7Z@20P4 20P7 21P5 22P2 23P7 25P5 27P5 2011 2015 2018 2022 2030 2037 2045 2055 2075 2090 2110
200 V
class
Enclosed type
(IEC IP20)
Available as standard Available for option Not
available
Open chassis type
(IEC IP00)
Available by removing the upper and lower cover of
enclosed type
Available as standard
Model CIMR-E7Z@40P4 40P7 41P5 42P2 43P7 45P5 47P5 4011 4015 4018 4022 4030 4037 4045 4055 4075 4090 4110 4132 4160 4185 4220 4300
400 V
class
Enclosed type
(IEC IP20)
Available as standard Available for option Not available
Open chassis type
(IEC IP00)
Available by removing the upper and lower cover of
enclosed type
Available as standard
Enclosed type (IP54) --------------------- Available as standard ----------------------
Model Number CIMR-E7Z@Specification
Control characteristics
Control method Sine wave PWM
V/f control
Speed control range 1:40
Speed control accuracy ±3 (25 °C ± 10 °C)
Frequency control range 0.0to 200.0 Hz
Frequency accuracy
(temperature characteristics)
Digital references: ± 0.01% (-10 °C to +40 °C)
Analog references: ±0.1% (25 ° C ±10 °C)
Frequency setting
resolution
Digital references: 0.01 Hz
Analog references: 0.025/50 Hz (11 bits plus sign)
Output frequency resolution 0.01 Hz
Frequency setting signal 0 to +10 V, 4 to 20 mA
Accel/decel time 0.01 to 6000.0 s (2 selectable combinations of independent acceleration and deceleration settings)
Braking torque Approximately 20%
Main control functions Restarting for momentary power loss, speed searches, overtorque detection, 5-speed control (maximum),
acceleration/deceleration time changes, S-curve acceleration, 3-wire control, autotuning, cooling fan ON/OFF control,
torque compensation, jump frequencies, upper and lower limits for frequency references, DC braking for starting and stopping,
high-slip braking, PI control (with sleep function), energy-saving control, MEMOBUS communications
(RS-485/422, 19.2 kbps maximum), fault reset, and copy function.
Protective functions
Motor protection Protection by electronic thermal overload relay.
Instantaneous overcurrent
protection
Stops at approx. 200% of rated output current.
Fuse blown protection Stops for fuse blown.
Overload protection 120% of rated output current for 1 minute
Overvoltage protection 200 class inverter: stops when main-circuit DC voltage is above 410 V.
400 class inverter: stops when main-circuit DC voltage is above 820 V.
Undervoltage protection 200 class inverter: stops when main-circuit DC voltage is below 190 V.
400 class inverter: stops when main-circuit DC voltage is below 380 V.
Momentary power loss ride
through
By selecting the momentary power loss method, operation can be continued if power is restored within 2 s.
Cooling fin overheating Protection by thermistor.
Stall prevention Stall prevention during acceleration, deceleration, or running.
Grounding protection Protection by electronic circuits.
Charge indicator Lights up when the main circuit DC voltage is approx. 50 V or more.
Protective structure
Enclosed wall-mounted type (NEMA 1): 18.5 kW or less (same for 200 V and 400 V class inverters)
Open chassis type (IP00): 22 kW or more (same for 200 V and 400 V class inverters)
Enclosed wall-mounted type (IP54): From 7.5 Kw to 55 Kw (400 V class inverters)
Environment
Ambient operating
temperature
-10 °C to 40 °C (enclosed wall-mounted type)
- 10 °C to 45 °C (open chassis type)
Ambient operating humidity 95% max. (with no condensation)
Storage temperature - 20 °C to + 60 °C (short-term temperature during transportation)
Application site Indoor (no corrosive gas, dust, etc.)
Altitude 1000 m max.
Vibration 10 to 20 Hz, 9.8 m/s2 max.; 20 to 50 Hz, 2 m/s2 max
Varispeed E76
4 Frequency inverters
Dimensions
Open chassis type (IEC IP00)
Voltage Max. applicable motor
output kW
Inverter
CIMR-E7Z@Fig Dimensions in mm Approx.
weight kg
Cooling
method
W H D W1 H1 H2 D1 T1 d
200 V class (3-phase)
0.4 ----
Not available, please use the IP20 type removing the upper and lower cover
0.75 ----
1.5 ----
2.2 ----
3.7 ----
5.5 ----
7.5 ----
11 ----
15 ----
18.5 ----
22 2022 0
3
250 400 258 195 385 7.5 100 2.3 M6 21
Fan
cooled
30 2030 0 275 450 220 435 24
37 2037 0 375 600 298 250 575
12.5
100
3.2 M10
57
45 2045 0 328
130
63
55 2055 0 450 725 348 325 700 86
75 2075 0 87
90 2090 0 500 850 358 370 820 15 4.5 M12 108
110 2110 0 575 885 378 445 855 140 150
400 V class (3-phase)
0.4 ----
Not available, please use the IP20 type removing the upper and lower cover
0.75 ----
1.5 ----
2.2 ----
4.0 ----
5.5 ----
7.5 ----
11 ----
15 ----
18.5 ----
22 4022 0
3
275 450 258 220 435
7.5
100
2.3 M6
21
Fan
cooled
30 4030 0
37 4037 0
325 550 283 260 535 105 36
45 4045 0
55 4055 0
75 4075 0 450 725 348 325 700 12.5
130
3.2 M10 88
90 4090 0 89
110 4110 0 500 850 358 370 820 15
4.5 M12
102
132 4132 0 120
160 4160 0 575 916 378 445 855 45.8 140 160
185 4185 0 710 1305 413 540 1270 15 125.5
260
220 4220 0 280
300 4300 0 916 1475 413 730 1440 405
Fig 1
W
W1 4-d
H2
(5) D1
D
H1
H
T1
(5)(5)
Frequency inverters 7
Varispeed E7 5
Enclosed type (IEC IP20)
Voltage Max. applicable motor
output kW
Inverter
CIMR-E7Z@Fig Dimensions in mm Approx.
weight kg
Cooling
method
W H D W1 H0 H1 H2 H3 D1 T1 d
200 V class (3-phase)
0.4 20P4 1
1 140 280
157
126 280 266 7 ---
39
5 M5
3Self
cooled
0.75 20P7 1
1.5 21P5 1
2.2 22P2 1
3.7 23P7 1 177 59 4
Fan
cooled
5.5 25P5 1
7.5 27P5 1
2
200 300 197 186 300 285 8 065.5
2.3 M6
6
11 2011 1 310 10 7
15 2015 1 240 350 207 216 350 335
7.5
078 11
18.5 2018 1 380 30
22 2022 1
3
254 535 258 195 400 385 135
100
24
30 2030 1 279 615 220 450 435 165 27
37 2037 1 380 809 298 250 600 575
12.5
209
3.2 M10
62
45 2045 1 328
130
68
55 2055 1 453 1027 348 325 725 700 302 94
75 2075 1 95
400 V class (3-phase)
0.4 40P4 1
1 140 280
157
126 280 266 7 ---
39
5 M5
3Self
cooled
0.75 40P7 1
1.5 41P5 1
2.2 42P2 1
177 59 4
Fan
cooled
3.7 43P7 1
4.0 44P0 1
5.5 45P5 1
7.5 47P5 1
2
200 300 197 186 300 285 8
---
65.5
2.3 M6
6
11 4011 1
15 4015 1 240 350 207 216 350 335
7.5
78 10
18.5 4018 1
22 4022 1
3
275 535 258 220 450 435 85 100 24
30 4030 1
37 4037 1
325 715 283 260 550 535 105 40
45 4045 1 105
55 4055 1
75 4075 1 453 1027 348 325 725 700 12.5 302
130
3.2 M10 96
90 4090 1 97
110 4110 1 504 1243 358 370 850 820 15 393 4.5 M12
122
132 4132 1 130
160 4160 1 579 1324 378 445 918 855 45.8 408 140 170
3
W
H0
H
H1
H2
H3
4
W1 D1
D
W
W1
3
H1
H2
D
H0
D1
4H
4-d 4-d
W
W1
H3 H0
H1
H2
D1
D
(5)
H10
4-d
T1
(5)(5)
H
Fig 1 Fig 2 Fig 3
T1 T1
E7Z 20P41 to E7Z25P51
E7Z40P41 to E7Z45P51
E7Z 27P51 to E7Z20181
E7Z47P51 to E7Z40181
E7Z 20221 to E7Z20751
E7Z40221 to E7Z41601
Varispeed E78
6 Frequency inverters
Enclosed wall-mounted inverters (IP54 type)
Component names
Accessories
Following parts are delivered in the package with the inverter.
Voltage Max. applicable motor
output kW
Inverter
CIMR-E7Z@
Dimensions in mm Heat loss
(W)
Cooling
method
W H D W1 H1 H2 T1 d Approx.
weight (kg)
400 V class (3-phase)
7.5 47P52
350 600
240
260 576 9 2.5 M8
25 304
Fan
11 40112 427
15 40152 260 30 536
18.5 40182 662
22 40222 410 650 300 370 620 12 2.5 M10 43 754
30 40302 989
37 40372
580 750 330 410 714 11 2.5 M14 71
1145
45 40452 1317
55 40552 1701
Part name
* Locknuts for each cable gland are also supplied.
Qty
Cable gland (for input)*
Cable gland (for motor ouput)*
Cable gland (for control)*
Cable gland (for fieldbus)*
Door key
Blind plug (control cable entry)
Blind plug (fieldbus cable entry)
W W1
H
H1H2
t1
D4-d
Digital operator
Door locks
Door
Cable entry plate
Mounting holes
Name plate
Wall mount
Inverter enclosure
Power input
(plastic gland)
Motor output
(7.5 kW to 30 kW: metal gland)
(37 kW to 55 kW: plastic gland)
Control
Field bus
(option)
1
1
1
1
1
1
1
Frequency inverters 9
Varispeed E7 7
Filters
Model Dimensions
A B C D E F G H I J K L
200 V 3G3RV-PFI2035-SE 330 141 46 281 313 115 5.5 M5 23 126 266 M5
3G3RV-PFI2060-SE 355 206 60 302 336 175 6.5 M6 30 186 285 M6
3G3RV-PFI2100-SE 408 236 80 355 390 205 6.5 M6 40 216 335 M6
400 V 3G3RV-PFI3010-SE 330 141 46 281 313 115 5.5 M4 23 126 266 M5
3G3RV-PFI3018-SE 330 141 46 281 313 115 5.5 M4 23 126 266 M5
3G3RV-PFI3035-SE 355 206 50 302 336 175 6.5 M5 25 186 285 M6
3G3RV-PFI3060-SE 408 236 65 355 390 205 6.5 M6 32.5 216 335 M6
Model Dimensions
A B C D E F G H
200 V 3G3RV-PFI2130-SE 310 180 90 280 295 65 6.5 M10
3G3RV-PFI2160-SE 380 170 120 350 365 102 6.5 M10
3G3RV-PFI2200-SE 518 240 130 480 498 90 8.2 M10
400 V 3G3RV-PFI3070-SE 329 185 80 300 314 55 6.5 M6
3G3RV-PFI3130-SE 310 180 90 280 295 65 6.5 M10
3G3RV-PFI3170-SE 380 170 120 350 365 102 6.5 M10
3G3RV-PFI3200-SE 518 240 130 480 498 90 8.3 M10
3G3RV-PFI3400-SE 386 115 260 306 240 235 12.0 M12
3G3RV-PFI3600-SE 386 135 260 306 240 235 12.0 M12
3G3RV-PFI3800-SE 564 160 300 516 420 275 9.0 M12
Varispeed E710
8 Frequency inverters
Braking unit dimensions
Braking resistor unit (separately-installed type) dimensions
Model CDBR-2015 B, -2022 B, -4030B, -4045 B Model CDBR-2110 B
Weight 1.8 Kg Weight 8.5 Kg
Model CDBR-4220 B
Weight 12 Kg
4-M4 MTG holes 72
3838
128
140
30 or
more 30 or
more 138.5
114.5
3-lead wire inlet
(20 dia. rubber bush)
66.5
100 or more
150
100 or more
138
140
104
Lead wire inlet
(28 dia. rubber bush)
2-lead wire inlet
(35 dia. rubber bush)
111
156
200
100
59
30
or
more
50
140
180
12
36.5
317
100 or less 100 or less
73
350
370
4-M6
MTG holes
Main circuit
terminal
M6
30
or
more
Lead wire inlet
(28 dia. rubber bush)
2-lead Wire Inlet
(35 dia. rubber bush)
156.5
210
104
118.5
50
210
250 200
156
111
9
36.5
100 or more 100 or more
317
355
370
70
4-M6
MTG holes
Main circuit
terminal
M6
30
or
more
30
or
more
Voltage Model
LKEB-_
Dimensions in mm Weight
kg
A B C D MTG screw
220 V
class
20P7 105 275 50 260 M5 x 3 3.0
21P5 130 350 75 335 M5 x 4 4.5
22P2 130 350 75 335 M5 x 4 4.5
23P7 130 350 75 335 M5 x 4 5.0
25P5 250 350 200 335 M6 x 4 7.5
25P5 250 350 200 335 M6 x 4 8.5
400 V
class
40P7 105 275 50 260 M5 x 3 3.0
41P5 130 350 75 335 M5 x 4 4.5
42P2 130 350 75 335 M5 x 4 4.5
43P7 130 350 75 335 M5 x 4 5.0
45P5 250 350 200 332 M6 x 4 7.5
47P5 250 350 200 332 M6 x 4 8.5
MTG screw
30 or more 30 or more
A
C
D
B
150
150 or more 150 or more
Voltage Model
LKEB@
Dimensions in mm Weight
kg
A B C D MTG screw
220 V
class
2011 266 543 246 340 M8 x 4 10
2015 356 543 336 340 M8 x 4 15
2018 446 543 426 340 M8 x 4 19
2022 446 543 426 340 M8 x 4 19
400 V
class
4011 350 412 330 325 M6 x 4 16
4015 350 412 330 325 M6 x 4 18
4018 446 543 426 340 M8 x 4 19
4022 446 543 426 340 M8 x 4 19
4030 356 956 336 740 M8 x 4 25
4037 446 956 426 740 M8 x 4 33
4045 446 956 426 740 M8 x 4 33
MTG screw
200 or more 200 or more
50 or more 50 or more
A
260
C
D
B
Frequency inverters 11
Varispeed E7 9
Attachments
Heatsink external mounting attachment
The Varispeed E7 inverters under the 200/400 V class 18.5 kW or less need this attachment for mounting the heatsink externally. This attachment
expands the outer dimensions of the width and height of the inverter. (Attachment is not required for inverters of 22 kW or more.)
Panel cut for external mounting of cooling fin (heatsink)
W1
W D1 D2
D3 or more
WallMounting panel
H1
H
Model
CIMR-
E7Z@
Attachment
order code
Dimensions in mm
W H W1 H1 D1 D2 D3
20P4
EZZ08676A 155 302 126 290 122.6
37.4 40
20P7
21P5
22P2
23P7 57.4 60
25P5
27P5 EZZ08676B 210 330 180 316 136.1 63.4 70
2011
2015 EZZ08676C 250 392 216 372 133.6 76.4 85
2018
40P4
EZZ08676A 155 302 126 290 122.6
37.4 4040P7
41P5
42P2
57.4 6043P7
45P5
47P5 EZZ08676B 210 330 180 316 136.1 63.4 70
4011
4015 EZZ08676C 250 392 216 372 133.6 76.4 85
4018
Fig 3
Fig 2
A
B
W
W1
(H3) (H3)
(H2)
(H2)
H1
H
2-5 Dia. holes
4-d Tap
a a
a a
b
b
(W3)(W3)
(W2)(W2)
W1
W
a a
4-d Tap
(H2)(H3) (H2) (H3)
H1
H
B
A (W3)(W3)
(W2)(W2)
a a
W1
W
a a
4-d Tap
(59)(H3) (19) (H3)
H1
H
B
A (W3)(W3)
(W2)(W2)
a a
Fig 1
Model
CIMR-
E7Z@
Draw-
ing
Dimensions in mm
W H W1 (W2) (W3) H1 (H2) (H3) A B d
20P4
1
155 302 126 6 8.5 290 9.5 6 138 271 M5
20P7
21P5
22P2
23P7
25P5
27P5 210 330 180
8.5
6.5 316 9 7 197 298
M6
2011
2015 250 392 216 8.5 372 9.5 10 233 353
2018
2022
2
250 400 195 24.5 3 385 8 7.5 244 369
2030 275 450 220 435 269 419
2037 375 600 250
54.5 8
575 15
12.5
359 545
M10
2045
2055 450 725 325 700 13.5 434 673
2075
2090 500 850 370 57 8 820 19 15 484 782 M12
2110 575 885 445 55 10 855 555 817
40P4
1
155 302 126 6 8.5 290 9.5 6 138 271 M5
40P7
41P5
42P2
43P7
45P5
47P5 210 330 180
8.5
6.5 316 9 7 197 298
M6
4011
4015 250 392 216 8.5 372 9.5 10 233 353
4018
4022
2
275 450 220
24.5
3 435
8 7.5
269 419
4030
4037
325 550 260 8 535 309 5194045
4055
4075 450 725 325 54.5 8 700 13.5 12.5 434 673 M10
4090
4110 500 850 370 57 8 820 19 15 484 782 M124132
4160 3 575 925 445 55 10 895 1
1. The sizes are different between the top and the bottom. Refer Fig 3
15 555 817
Varispeed E712
10 Frequency inverters
Installation
Standard connections
M2
M1
MC
MB
MA
L1
L2
L3
PE
M
S2
R/L1
S/L2
T/L3
U/T1
V/T2
W/T3
S3
S4
S5
S6
S7
SN
SC
SP 24 V
+V
AC
A2
A1
0V
E(G)
PP
4 to 20 mA
0 to 10 V
32 k
E(G)
FM
+
-
AC
FM
R+
R-
S+
S-
IG
1 2
U X
P
P
P
2
1
Motor
-V
Line
filter*
Main
contactor
3-phase power
supply
380 to 480 V
50/60 Hz
DC reactor to improve input
power factor (optional)
Short-circuit bar
M4
M3
Ω
2 k
Ω
Reverse run/stop
External fault
Fault reset
Multi-step speed setting 1
Multi-step speed setting 2
Jog frequency selection
Multi-function
digital inputs
[Factory settings]
Analog input 1: Master
frequency reference
0 to 10 V (20 kΩ)
Analog input power supply
+15 V, 20 mA
Multi-function analog input 1:
[Default: Frequency Bias
4 to 20 mA (250 Ω)]
Analog input power supply
-15 V, 20 mA
Terminating
resistance
MEMOBUS
communication
RS-485/422
Shielded wires Twisted-pair
shielded wires
Multi-function analog output 1
(0 to 10 V, 2 mA)
[Default: Output frequency, 0 to 10 V]
Multi-function analog output 2
(0 to 10 V, 2 mA)
[Default: Output power, 0 to 10 V]
Fault contact output
250 VAC, 1 A max.
30 VDC, 1 A max.
Contact output 1
[Default: During run]
Contact output 2
[Default: Zero speed]
Multi-function digital
output
250 VAC, 1 A max.
30 VDC, 1 A max.
Adjustment,
20 kΩ
Adjustment,
20 kΩ
Fuse
Shield
terminal
Shield
terminal
Adjustment
Forward run/stop S1
Varispeed E7
CIMR-
E7Z47P5
+
-
AM
AM
*E7 IP54 types has RFI filter included as standard
Frequency inverters 13
Varispeed E7 11
Main circuit
Voltage 200 V 400 V
Model CIMR-E7Z@20P4 to 2018 2022, 2030 2037 to 2110 40P4 to 4018 4022 to 4055 4075 to 4300
Max. applicable motor output 0.4 to 18.5 kW 22 to 30 kW 37 to 110 kW 0.4 to 18.5 kW 22 to 55 kW 75 to 300 kW
R/L1 Main circuit input
power supply Main circuit input
power supply
R-R1, S-S1 and T-T1 have been wired
before shipment (see P59).
Main circuit input
power supply Main circuit input
power supply
R-R1, S-S1 and T-T1 have been wired
before shipment
S/L2
T/L3
R1/L11
--- ---S1/L21
T1/L31
U/T1
Inverter output Inverter outputV/T2
W/T3
DC reactor
( 1- 2)
DC power supply1
( 1 - )
1. 1 - DC power input does not conform to UL/c-UL listed standard.
DC power supply
( 1- 2)1
Braking unit
( 3 - )
DC reactor
( 1- 2)
DC power supply1
( 1 - )
DC power supply
( 1- 2)1
Braking unit
( 3 - )
1
2
3--- ---
/l2------ Cooling fan power
supply2
2. Cooling fan power supply r/l1- /l2: 200 to 220 VAC 50 Hz, 200 to 230 VAC 60 Hz
(A transformer is required for 230 V 50 Hz or 240 V 50/60 Hz power supply.)
---
r/l1
--- Cooling fan power
supply3
3. Cooling fan power supply r/l1 - 200 / l2 200: 200 to 220 VAC 50 Hz, 200 to 230 VAC 60 Hz, r/l1 - 400 / l2 400: 380 to 480 VAC 50/60 Hz
200 / l2 200 ------
400 / l2 400
PE ( ) Ground terminal (100 Ω or less) Ground terminal (10 Ω or less)
Main circuit configuration
200 V class400 V class400V class IP54
CIMR-E7Z47P5 to 40182 CIMR-E7Z40222 to 40552
CIMR
-
E7Z20P4 t
o
2018
CIMR-E7Z2022, 2030 CIMR-E7Z2037 to 2110
CIMR
-
E7Z40P4 t
o
4018
CIMR-E7Z4022 to 4055 CIMR-E7Z4075 to 4300
S/L2
T/L3
R/L1
Power
supply
Control
circuits
V/T2
W/T3
U/T1
EMC
filter
1
2
Varispeed E714
12 Frequency inverters
Control circuit
Note: 1.The default settings are given for terminals S3 to S7. For a 3-wire sequence, the default settings are a 3-wire sequence for S5, multi-step speed setting 1
for S6 and multi-step speed setting 2 for S7.
2.Do not use this power supply for supplying any external equipment.
3.When driving a reactive load, such as a relay coil with DC power supply, always insert a flywheel diode.
Type No. Signal name Function Signal level
Digital input signals
S1 Forward run/stop command Forward run when ON; stopped when OFF.
24 VDC, 8 mA
photocoupler isolation
S2 Reverse run/stop command Reverse run when ON; stopped when OFF.
S3 External fault input*1 Fault when ON.
Functions are selected by
setting H1-01 to H1-05.
S4 Fault reset*1 Reset when ON
S5 Multi-step speed reference 1*1
(Master/auxiliary switch)
Auxiliary frequency reference when
ON.
S6 Multi-step speed reference 2*1 Multi-step setting 2 when ON.
S7 Jog frequency reference*1 Jog frequency when ON.
SC Digital input common – –
SN Digital input neutral – –
SP Digital input power supply +24 VDC power supply for digital inputs 24 VDC, 250 mA max. *2
Analog input signals
+V 15 V power output 15 V power supply for analog references 15 V (max. current: 20 mA)
A1 Frequency reference 0 to +10 V/100% 0 to +10 V (20 kΩ)
A2 Multi-function analog input
4 to 20 mA/100%
0 V to +10 V/100%
0 to 20 mA/100%
Function is selected by
setting H3-09.
4 to 20 mA (250 Ω)
0 V to +10 V (20 kΩ)
0 to 20 mA (250 Ω)
AC Analog reference common – –
E(G) Shield wire, optional ground line
connection point – –
Digital output signals
M1
Running signal
(1NO contact) Operating when ON.
Multi-function
contact outputs Relay contacts
contact capacity:
1 A max. at 250 VAC
1 A max. at 30 VDC*3
M2
M3
Zero speed Zero level (b2-01) or below when ON
M4
MA
Fault output signal Fault when CLOSED across MA and MC
Fault when OPEN across MB and MC
MB
MC
Analog output
signals
FM Multi-function analog output
(frequency output)
0 to 10 V, 10 V=100%
output frequency
Multi-function analog
output 1 0 to +10 V max. ±5%
2 mA max.
AC Analog common –
AM Multi-function analog output
(current monitor)
0 to 10 V, 10V = 200% of the inverter
rated current
Multi-function analog
output 2
RS-485/422
R+ MEMOBUS communications input
For 2-wire RS-485, short R+ and S+ as well as R- and S-.
Differential input,
photocoupler isolation
R-
S+ MEMOBUS communications output Differential input,
photocoupler isolation
S-
IG Signal common – –
Internal heatsink
55 ˚C
45 ˚C
Upper cover
Upper part air
temperature
-10 to 55 ˚C
Open chassis
type inverter
Inverter inlet
temperature
-10 to 45 ˚C
Peripheral
temperature 40 ˚C
Lower cover
Heatsink
Remove the upper and lower covers
for the models of 15 kW or less in
200 V and 400 V classes.
When using open chassis type inverters of 200 V/400 V
22 kW or more, secure spaces for eyebolts and wiring
of the main circuit.
Upper cover
50 mm or more
50 mm or more 120 mm or more
120 mm or more
30 mm or more 30 mm
or more
Heatsink
Lower cover Side spaces Top and bottom spaces
Cover MTG screw
Air
Air
Frequency inverters 15
Varispeed E7 13
Inverter heat loss
200 V class
400 V class
Installation conditions for IP54
Model CIMR-E7Z@20P4 20P7 21P5 22P2 23P7 25P5 27P5 2011 2015 2018 2022 2030 2037 2045 2055 2075 2090 2110
Inverter capacity kVA 1.2 1.6 2.7 3.7 5.7 8.8 12 17 22 27 32 44 55 69 82 110 130 160
Rated current A 3.2 4.1 7.0 9.6 15 23 31 45 58 71 85 115 145 180 215 283 346 415
Heat loss W
Fin W 20 27 50 70 112 164 219 374 429 501 586 865 1015 1266 1588 2019 2437 2733
Inside unit W 39 42 50 59 74 84 113 170 183 211 274 352 411 505 619 838 997 1242
Total heat loss W 59 69 100 129 186 248 332 544 612 712 860 1217 1426 1771 2207 2857 3434 3975
Fin cooling Self cooled Fan cooled
Model CIMR-E7Z@
40P4 40P7 41P5 42P2 43P7 44P0 45P5 47P5
401
1
401
5
401
8
402
2
403
0
403
7
404
5
405
5
407
5
409
0
411
0
413
2
416
0
418
5
422
0
430
0
Inverter capacity kVA 1.4 1.6 2.8 4.0 5.8 6.0 9.5 13 18 24 30 34 46 57 69 85 110 140 160 200 230 280 390 510
Rated current A 1.8 2.1 3.7 5.3 7.6 8.0 12.5 17 24 31 39 45 60 75 91 112 150 180 216 260 304 370 506 675
Heat loss W
Fin W 14 17 36 59 80 91 127 193 252 326 426 466 678 784 901 120 139 161 209 238 279 323 374 583
Inside unit W 39 41 48 56 68 70 82 114 158 172 208 259 317 360 415 495 575 671 853 100 114 137 153 232
Total heat loss W 53 58 84 115 148 161 209 307 410 498 634 725 995 114 131 169 197 228 295 339 393 460 527 815
Fin cooling Self cooled Fan cooled
Horizontal Space Vertical Spcae
50 mm min.
50 mm min.
30 mm min. 30 mm min.
120 mm min.
120 mm min. Air
Air
Install the inverter vertically in order to ensure a proper cooling. When installing the inverter,
always provide the following minimum installation space to allow normal heat dissipation.
1. Always provide enough space for the main circuit or control lines including cable gland.
2. If installing inverters next to one another provide a minimum spacing of 60 mm.
Horizontal space Vertical space
Varispeed E716
14 Frequency inverters
Connections for braking units
AC reactor
200 V class 400 V class
Max. applicable
motor output kW
Current value
A
Inductance
mH
Max. applicable
motor output kW
Current value
A
Inductance
mH
0.4 2.5 4.2 0.4 1.3 18.0
0.75 5 2.1 0.75 2.5 8.4
1.5 10 1.1 1.5 5 4.2
2.2 15 0.71 2.2 7.5 3.6
3.7 20 0.53 3.7 10 2.2
5.5 30 0.35 5.5 15 1.42
7.5 40 0.265 7.5 20 1.06
11 60 0.18 11 30 0.7
15 80 0.13 15 40 0.53
18.5 90 0.12 18.5 50 0.42
22 120 0.09 22 60 0.36
30 160 0.07 30 80 0.26
37 200 0.05 37 90 0.24
45 240 0.044 45 120 0.18
55 280 0.038 55 150 0.15
75 360 0.026 75 200 0.11
90 500 0.02 90/110 250 0.09
110 500 0.02 132/160 330 0.06
185 490 0.04
220
300 660 0.03
Varispeed E7
Level detector
Braking
resistor
unit
Braking
resistor
unit *
3
Braking unit 2*
2
Braking unit 1
Braking resistor overload
Relay trip contact
(thermal relay trip contact)
Cooling fin overheat contact
(thermoswitch contact)
Cooling fin overheat contact
(thermoswitch contact)
Braking resistor overload
relay trip contact
(thermal relay trip contact)
Connection example
MCCB
AC reactor
Application example
Inverter capacity (kVA)
Motor
Power supply
capacity (kVA)
AC reactor required for
power supply harmonics
AC reactor
not required
Varispeed E7
Frequency inverters 17
Varispeed E7 15
DC reactor
Fuse installation
To protect the inverter, it is recommended to use semiconductor fuses as shown in the table below
200 V class 400 V class
Max. applicable
motor output kW
Current value
A
Inductance
mH
Max. applicable
motor output kW
Current value
A
Inductance
mH
0.4 5.4 8 0.4 3.2 28
0.75 0.75
1.5 18 3 1.5 5.7 11
2.2 2.2
3.7 3.7 12 6.3
5.5 36 1 5.5 23 3.6
7.5 7.5
11 72 0.5 11 33 1.9
15 15
18.5 90 0.4 18.5 47 1.3
22 to 110 Built-in 22 to 300 Built-in
Varispeed E7
Take off the
common bar
between G1
and G2, and
wire as shown
in the diagram.
⊕⊕
DC reactor
Motor
MCCB
Power
supply
capacity
(kVA)
Inverter capacity (kVA)
Without reactor
With reactor for
power supply
coordination
Inverter type FUSE
Voltage (V) Current (A) I2t (A2s)
20P4 240 10 12~25
20P7 240 10 12~25
21P5 240 15 23~55
22P2 240 20 34~98
23P7 240 30 82~220
25P5 240 40 220~610
27P5 240 60 290~1300
2011 240 80 450~5000
2015 240 100 1200~7200
2018 240 130 1800~7200
2022 240 150 870~16200
2030 240 180 1500~23000
2037 240 240 2100~19000
2045 240 300 2700~55000
2055 240 350 4000~55000
2075 240 450 7100~64000
2090 240 550 11000~64000
2110 240 600 13000~83000
Inverter type FUSE
Voltage (V) Current (A) I2t (A2s)
40P4 480 5 6~55
40P7 480 5 6~55
41P5 480 10 10~55
42P2 480 10 18~55
43P7 480 15 34~72
44P0 480 20 50~570
45P5 480 25 100~570
47P5 480 30 100~640
4011 480 50 150~1300
4015 480 60 400~1800
4018 480 70 700~4100
4022 480 80 240~5800
4030 480 100 500~5800
4037 480 125 750~5800
4045 480 150 920~13000
4055 480 150 1500~13000
4075 480 250 3000~55000
4090 480 300 3800~55000
4110 480 350 5400~23000
4132 480 400 7900~64000
4160 480 450 14000~250000
4185 480 600 20000~250000
4220 480 700 34000~400000
4300 480 900 52000~920000
Varispeed E718
16 Frequency inverters
Ordering information
Varispeed E7
200 V 400 V
C22
R52
C24
PE
C16
U11
U8
R6
C26C28
JP3
U6
U7
T1
U9
+
+
R15
R15
R25
R15
R20
R30
R7
R5
C5
R21
U14
C17
R14
R28
RR11
JP1
C1
U10
C3
R5
R1
R2
R36
R3
C21
R35
R70
R120
R75
R78
R114
C2
2
+
+
U1
+
C35R99
U12
R95
R39
R40
R57
R56
D6
R6
U15
R54
R55
R8
TR2
11
R11
R110
R107
R113
TR1
C13
U13
C10
SI-N
CODE No.
U17
73600-C0210
JP5JP6
RT4
R10
R10
R105
R102
C12
C11
R94
R97
R96
C20
R95
C39
R131
Y1
U10
C33
E
D
CB
A
D D D D
Communication card PLC option card
3G3IV-PCN329-E
Inverter to PC cable
3G3IV-PCN126/326
Digital operator
extension cable
JVOP-161-OY
Digital operator
(LED display)
JVOP-160 OY
Digital operator
(LCD display)
CX-Drive
Line Filter
LKEB_ braking
resistor unit
CDBR_B
braking unit
Braking accessories
Varispeed E7
* E7 IP54 types are built-in filter inverters.
*see note
Specifications Model
IP20 0.55 Kw 3.2 A CIMR-E7Z20P41
0.75 Kw 4.1 A CIMR-E7Z20P71
1.5 Kw 7.0 A CIMR-E7Z21P51
2.2 Kw 9.6 A CIMR-E7Z22P21
3.7 Kw 15 A CIMR-E7Z23P71
5.5 Kw 23 A CIMR-E7Z25P51
7.5 Kw 31 A CIMR-E7Z27P51
11 Kw 45 A CIMR-E7Z20111
15 Kw 58 A CIMR-E7Z20151
18.5 Kw 71 A CIMR-E7Z20181
IP00 22 Kw 85 A CIMR-E7Z20220
30 Kw 115 A CIMR-E7Z20300
37 Kw 145 A CIMR-E7Z20370
45 Kw 180 A CIMR-E7Z20450
55 Kw 215 A CIMR-E7Z20550
75 Kw 283 A CIMR-E7Z20750
90 Kw 345 A CIMR-E7Z20900
110 Kw 415 A CIMR-E7Z21100
Specifications Model
IP20 0.55 Kw 1.8 A CIMR-E7Z40P41
0.75 Kw 2.1 A CIMR-E7Z40P71
1.5 Kw 3.7 A CIMR-E7Z41P51
2.2 Kw 5.3 A CIMR-E7Z42P21
3.7 Kw 7.6 A CIMR-E7Z43P71
4.0 Kw 8.7 A CIMR-E7Z44P01
5.5 Kw 12.5 A CIMR-E7Z45P51
7.5 Kw 17 A CIMR-E7Z47P51
11 Kw 24 A CIMR-E7Z40111
15 Kw 31 A CIMR-E7Z40151
18.5 Kw 39 A CIMR-E7Z40181
IP00 22 Kw 45 A CIMR-E7Z40220
30 Kw 60 A CIMR-E7Z40300
37 Kw 75 A CIMR-E7Z40370
45 Kw 91 A CIMR-E7Z40450
55 Kw 112 A CIMR-E7Z40550
75 Kw 150 A CIMR-E7Z40750
90 Kw 180 A CIMR-E7Z40900
110 Kw 216 A CIMR-E7Z41100
132 Kw 260 A CIMR-E7Z41320
160 Kw 304 A CIMR-E7Z41600
185 Kw 370 A CIMR-E7Z41850
220 Kw 506 A CIMR-E7Z42200
300 Kw 675 A CIMR-E7Z43000
Frequency inverters 19
Varispeed E7 17
Varispeed E7 IP54
400 V
A Input filters
200 V 400 V
Specifications Model
IP54 7.5 Kw 17 A CIMR-E7Z47P52
11 Kw 24 A CIMR-E7Z40112
15 Kw 31 A CIMR-E7Z40152
18.5 Kw 39 A CIMR-E7Z40182
22 Kw 45 A CIMR-E7Z40222
30 Kw 60 A CIMR-E7Z40302
37 Kw 75 A CIMR-E7Z40372
45 Kw 91 A CIMR-E7Z40452
55 Kw 112 A CIMR-E7Z40552
Inverter model Line filters 1
1. Varispeed E7 is a built-in filter inverter.
Varispeed E7 Type EN55011
class
Current
(A)
Weight
(kg)
CIMR-E7Z20P4 3G3RV-PFI3010-SE B, 25 m
A, 100 m
10 1.1
CIMR-E7Z20P7
CIMR-E7Z21P5
CIMR-E7Z22P2 3G3RV-PFI3018-SE B, 25 m
A, 100 m
18 1.3
CIMR-E7Z23P7 3G3RV-PFI2035-SE B, 25 m
A, 100 m
35 1.4
CIMR-E7Z25P5
CIMR-E7Z27P5 3G3RV-PFI2060-SE B, 25 m
A, 100 m
60 3
CIMR-E7Z2011
CIMR-E7Z2015 3G3RV-PFI2100-SE B, 25 m
A, 100 m
100 4.9
CIMR-E7Z2018
CIMR-E7Z2022 3G3RV-PFI2130-SE A, 100 m 130 4.3
CIMR-E7Z2030
CIMR-E7Z2037 3G3RV-PFI2160-SE A, 100 m 160 6.0
CIMR-E7Z2045 3G3RV-PFI2200-SE A, 100 m 200 11.0
CIMR-E7Z2055
CIMR-E7Z2075 3G3RV-PFI3400-SE A, 100 m 400 18.5
CIMR-E7Z2090
CIMR-E7Z2110 3G3RV-PFI3600-SE A, 100 m 600 11.0
Inverter model Line filter 1
1. Varispeed E7 is a built-in filter inverter.
Varispeed E7 Model EN 55011
class*
Current
(A)
Weight
(kg)
CIMR-E7Z40P4 3G3RV-PFI3010-SE B, 25 m
A, 100 m
10 1.1
CIMR-E7Z40P7
CIMR-E7Z41P5
CIMR-E7Z42P2
CIMR-E7Z43P7 3G3RV-PFI3018-SE B, 25 m
A, 100 m
18 1.3
CIMR-E7Z44P0
CIMR-E7Z45P5
CIMR-E7Z47P5 3G3RV-PFI3035-SE B, 25 m
A, 100 m
35 2.1
CIMR-E7Z4011
CIMR-E7Z4015 3G3RV-PFI3060-SE B, 25 m
A, 100 m
60 4.0
CIMR-E7Z4018
CIMR-E7Z4022 3G3RV-PFI3070-SE A, 100 m 70 3.4
CIMR-E7Z4030
CIMR-E7Z4037 3G3RV-PFI3130-SE A, 100 m 130 4.7
CIMR-E7Z4045
CIMR-E7Z4055
CIMR-E7Z4075 3G3RV-PFI3170-SE A, 100 m 170 6.0
CIMR-E7Z4090 3G3RV-PFI3200-SE A, 100 m 250 11
CIMR-E7Z4110
CIMR-E7Z4132 3G3RV-PFI3400-SE A, 100 m 400 18.5
CIMR-E7Z4160
CIMR-E7Z4185 3G3RV-PFI3600-SE A, 100 m 600 11,0
CIMR-E7Z4220
CIMR-E7Z4300 3G3RV-PFI3800-SE A, 100 m 800 31.0
Varispeed E720
18 Frequency inverters
B Communication cards
C PLC Option Card
D Accessories
D Computer software
Type Model Description Function
Communication option cards
3G3RV-PDRT2 DeviceNet option card
• Used for running or stopping the inverter, setting or referencing parameters, and monitoring out-
put frequency, output current, or similar items through DeviceNet communication with the host
controller.
SI-P1 PROFIBUS-DP option card
• Used for running or stopping the inverter, setting or referencing parameters, and monitoring out-
put frequency, output current, or similar items through PROFIBUS-DP communication with the
host controller.
SI-S1 CANopen option card
• Used for running or stopping the inverter, setting or referencing parameters, and monitoring out-
put frequency, output current, or similar items through CANopen communication with the host
controller.
CM090 Ethernet option card • MODBUS TCP/IP Ethernet interface unit.
SI-J1 LONWORKS option card
• Used for HVAC control, running or stopping the inverter, setting or referencing parameters, and
monitoring output current, watt-hours, or similar items through LONWORKS communications
with peripheral devices.
Type Model Description Function
PLC option cards
3G3RV-P10CDT-E
3G3-P10CDT-E-DRT
PLC option
• Full features, wireless installation and seamless access to the inverter parameters and ana-
logue/digital inputs and outputs
• Embedded Compobus/S fieldbus
• Standard OMRON tools can be used for programming
PLC option with DeviceNet
• Same features as standard models with DeviceNet support
Type Model Description Installation
Digital operators
JVOP-160-OY
5 lines LCD digital operator 1
1. LCD digital operator is the Standard in IP54 types.
Panel cutout installation
JVOP-161-OY
7 segment LED digital operator
JVOP-162
Hand-Off auto operator
Accessories
3G3IV-PCN126
3G3IV-PCN326
Digital operator extension cable
1 meter
3 meters
-----
3G3IV-PCN329-E PC configuration cable -----
Type Model Description Function
Software
CX-drive Computer software Configuration and monitoring software tool
CX-One Computer software Configuration and monitoring software tool
70 70
14.5
2.5
20
44
15.8 6.4
(60)
57
Through
Hole
120
111
120
2-M3 MTG Holes
Panel
Panel cutout
Frequency inverters 21
Varispeed E7 19
E Braking unit, braking resistor unit
Inverter
Braking unit Braking resistor unit
Separately-installed type (10 %ED, 10 sec. max.)1
1. Load factor during deceleration to stop a load with constant torque. With constant output or continuous regenerative braking, the load factor is smaller
than the specified value.
2. Resistance value per one braking unit. Select a resistance value that is larger than connectable minimum resistance value to obtain enough braking
torque.
3. For an application with large regenerative power such as hoisting, the braking torque or other items may exceed the capacity of a braking unit with a
braking resistor in a standard combination (can result in capacity overload). Contact your OMRON representatives when the braking torque or any other
item exceeds the values in the table.
Voltage
Max.
applicable
motor
output kW
Model
CIMR-E7Z@
Model
CDBR@No. of used Model
LKEB@Specifications of resistor No. of used Braking
torque %
Connectable
min resistance
value Ω
200 V class
0.4 20P4
2015B 1
20P7 70 W 200 Ω1 220 48
0.75 20P7 20P7 70 W 200 Ω1 125 48
1.5 21P5 21P5 260 W 100 Ω1 125 48
2.2 22P2 22P2 260 W 70 Ω1 120 16
3.7 23P7 23P7 390 W 40 Ω1 125 16
5.5 25P5 25P5 520 W 30 Ω1 115 16
7.5 27P5 27P5 780 W 20 Ω1 125 9.6
11 2011 2011 2400 W 13.6 Ω1 125 9.6
15 2015 2015 3000 W 10 Ω1 125 9.6
18.5 2018 2022B 1 2015 3000 W 10 Ω1 125 9.6
22 2022 2022 4800 W 6.8 Ω1 125 6.4
30 2030 2015B 2 2015 3000 W 10 Ω2 125 9.6
37 2037 2015B 2 2015 3000 W 10 Ω2 100 9.6
45 2045 2022B 2 2022 4800 W 6.8 Ω2 120 6.4
55 2055 2022B 2 2022 4800 W 6.8 Ω2 100 6.4
75 2075 2110B 1 2022 4800 W 6.8 Ω3 110 1.6
90 2090 2110B 1 2022 4800 W 6.8 Ω4 120 1.6
110 2110 2110B 1 2018 4800 W 8 Ω5 100 1.6
400 V class
0.4 40P4
4030B 1
40P7 70 W 750 Ω1 230 96
0.75 40P7 40P7 70 W 750 Ω1 130 96
1.5 41P5 41P5 260 W 400 Ω1 125 64
2.2 42P2 42P2 260 W 250 Ω1 135 64
3.7 43P7 43P7 390 W 150 Ω1 135 32
5.5 45P5 45P5 520 W 100 Ω1 135 32
7.5 47P5 47P5 780 W 75 Ω1 130 32
11 4011 4011 1040 W 50 Ω1 135 20
15 4015 4015 1560 W 40 Ω1 125 20
18.5 4018 4018 4800 W 32 Ω1 125 19.2
22 4022 4022 4800 W 27.2 Ω1 125 19.2
30 4030 4030 6000 W 20 Ω1 125 19.2
37 4037 4045B 1 4037 9600 W 16 Ω1 125 12.8
45 4045 4045B 1 4045 9600 W 13.6 Ω1 125 12.8
55 4055 4030B 2 4030 6000 W 20 Ω2 135 19.2
75 4075 4045B 2 4045 9600 W 13.6 Ω2 145 12.8
90 4090 4220B 1 4030 6000 W 20 Ω3 100 3.2
110 4110 4220B 1 4030 6000 W 20 Ω3 100 3.2
132 4132 4220B 1 4045 9600 W 13.6 Ω4 140 3.2
160 4160 4220B 1 4045 9600 W 13.6 Ω4 140 3.2
185 4185 4220B 1 4045 9600 W 13.6 Ω4 120 3.2
220 4220 4220B 1 4037 9600 W 16 Ω5 110 3.2
300 4300 4220B 2 4045 9600 W 13.6 Ω6 110 3.2
Varispeed E722
20 Frequency inverters
In the interest of product improvement, specifications are subject to change without notice.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
Cat. No. I21E-EN-02
Frequency inverters 23
Austria
Tel: +43 (0) 1 80 19 00
www.omron.at
Belgium
Tel: +32 (0) 2 466 24 80
www.omron.be
Czech Republic
Tel: +420 234 602 602
www.omron.cz
Denmark
Tel: +45 43 44 00 11
www.omron.dk
Finland
Tel: +358 (0) 207 464 200
www.omron.fi
France
Tel: +33 (0) 1 56 63 70 00
www.omron.fr
Germany
Tel: +49 (0) 2173 680 00
www.omron.de
Hungary
Tel: +36 (0) 1 399 30 50
www.omron.hu
Italy
Tel: +39 02 326 81
www.omron.it
Middle East & Africa
Tel: +31 (0) 23 568 11 00
www.omron-industrial.com
Netherlands
Tel: +31 (0) 23 568 11 00
www.omron.nl
Norway
Tel: +47 (0) 22 65 75 00
www.omron.no
Poland
Tel: +48 (0) 22 645 78 60
www.omron.pl
Portugal
Tel: +351 21 942 94 00
www.omron.pt
Russia
Tel: +7 495 745 26 64
www.omron.ru
Spain
Tel: +34 913 777 900
www.omron.es
Sweden
Tel: +46 (0) 8 632 35 00
www.omron.se
Switzerland
Tel: +41 (0) 41 748 13 13
www.omron.ch
Turkey
Tel: +90 (0) 216 474 00 40
www.omron.com.tr
United Kingdom
Tel: +44 (0) 870 752 08 61
www.omron.co.uk
More Omron representatives
www.omron-industrial.com
Control Systems
• Programmable logic controllers • Human-machine interfaces • Remote I/O
Motion & Drives
• Motion controllers • Servo systems • Inverters
Control Components
• Temperature controllers • Power supplies • Timers • Counters • Programmable relays
• Digital panel indicators • Electromechanical relays • Monitoring products • Solid-state relays
• Limit switches • Pushbutton switches • Low voltage switch gear
Sensing & Safety
• Photoelectric sensors • Inductive sensors • Capacitive & pressure sensors • Cable connectors
• Displacement & width-measuring sensors • Vision systems • Safety networks • Safety sensors
• Safety units/relay units • Safety door/guard lock switches
Authorised Distributor:
E7_IP54_01_EN_INT
Although we strive for perfection, Omron Europe BV and/or its subsidiary and affiliated companies do not warrant
or make any representations regarding the correctness or completeness of the information described in this document.
We reserve the right to make any changes at any time without prior notice.
OMRON EUROPE B.V.
Wegalaan 67-69, NL-2132 JD, Hoofddorp, The Netherlands. Tel: +31 (0) 23 568 13 00 Fax: +31 (0) 23 568 13 88 www.omron-industrial.com
