1
2
3
4
5
6
7
Part Numbering 2
Selection Guide 6
Chip Monolithic Ceramic Capacitors
For General Purpose GRM Series 8
Specifications and Test Methods 51
Reference Data 61
Capacitor Array GNM Series 64
Specifications and Test Methods 70
Low ESL LLL/LLR/LLA/LLM Series 76
Specifications and Test Methods 83
High-Q Type GJM Series 87
Specifications and Test Methods 97
High Frequency GQM Series 100
Specifications and Test Methods 108
Reference Data 111
Monolithic Microchip GMA Series 112
Specifications and Test Methods 115
For Bonding GMD Series 119
Specifications and Test Methods 124
Package 128
!Caution 132
Notice 144
Reference Data 151
CONTENTS
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
for EU RoHS Compliant
All the products in this catalog comply with EU RoHS.
EU RoHS is "the European Directive 2002/95/EC on the Restriction of the Use
of Certain Hazardous Substances in Electrical and Electronic Equipment".
For more details, please refer to our website 'Murata's Approach for EU RoHS'
(http://www.murata.com/info/rohs.html).
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Chip Monolithic Ceramic Capacitors (Medium Voltage)
For General Purpose GRM/GRJ Series
1-1 Low Dissipation Factor GRM Series 160
Specifications and Test Methods 164
1-2 High Capacitance for General Use GRM Series 166
Specifications and Test Methods 168
1-3 Soft Termination Type GRJ Series 171
Specifications and Test Methods 173
Only for Applications
2-1 For LCD Backlight Inverter Circuit GRM/DC3.15kV Series 176
Specifications and Test Methods 177
2-2 For Information Devices GR4 Series 179
Specifications and Test Methods 180
2-3 For Camera Flash Circuit GR7 Series 183
Specifications and Test Methods 184
AC250V Type (Which Meet Japanese Law) GA2 Series 187
Specifications and Test Methods 188
Safety Standard Certified GA3 Series
4-1 UL, IEC60384-14 Class X1/Y2 Type GC 191
4-2 IEC60384-14 Class Y2, X1/Y2 Type GF 192
4-3 IEC60384-14 Class Y3 Type GD 194
4-4 IEC60384-14 Class X2 Type GB 195
Specifications and Test Methods 196
Reference Data (Typical Example) 200
Package 203
!Caution 206
Notice 214
ISO 9001 Certifications 217
Intro duction SimSurfing 218
Intro duction EMICON-FUN! 219
1
2
3
4
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General Purpose
GRM/GRJ Series
Only for ApplicationsAC250V Type
GA2 Series
Safety Standard
Certified GA3 Series
Product Information
Please check the MURATA home page (http://www.murata.com/) if you cannot find the part number in the catalog.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Please check the MURATA home page (http://www.murata.com/) if you cannot find the part number in the catalog.
(Part Number)
w
qProduct ID
wSeries
Chip Monolithic Ceramic Capacitors
GR
GQ
GM
GN
LL
GJ
GA
J
M
4
7
M
A
D
M
L
R
A
M
M
2
3
Soft Termination Type
Tin Plated Layer
Only for Information Devices / Tip & Ring
Only for Camera Flash Circuit
High Frequency for
Flow/Reflow Soldering
Monolithic Microchip
For Bonding
Capacitor Array
Low ESL Type
Controlled ESR Low ESL Type
8-termination Low ESL Type
10-termination Low ESL Type
High Frequency Low Loss Type
For AC250V (r.m.s.)
Safety Standard Certified Type
Product ID Code Series
GR
q
M
e
18
r
8
t
B1
y
1H
u
102
i
K
o
A01
eDimensions (LgW)
!0
D
Code
0.4g0.2mm
0.6g0.3mm
0.5g0.5mm
0.8g0.8mm
0.38g0.38mm
0.9g0.6mm
1.0g0.5mm
1.6g0.8mm
1.37g1.0mm
2.0g1.25mm
2.8g2.8mm
3.2g1.6mm
3.2g2.5mm
4.5g2.0mm
4.5g3.2mm
5.7g2.8mm
5.7g5.0mm
Dimensions (LgW)
01005
0201
0202
0303
015015
0302
0402
0603
0504
0805
1111
1206
1210
1808
1812
2211
2220
EIA
02
03
05
08
0D
0M
15
18
1M
21
22
31
32
42
43
52
55
A
B
C
D
E
F
M
N
Q
R
S
X
1.0mm
1.25mm
1.6mm
2.0mm
2.5mm
3.2mm
1.15mm
1.35mm
1.5mm
1.8mm
2.8mm
Depends on individual standards.
rDimension (T) (Except GNM)
Code
2
3
5
6
7
8
9
0.2mm
0.3mm
0.5mm
0.6mm
0.7mm
0.8mm
0.85mm
Dimension (T)
rElements (GNM Only)
Code
2
4
2-elements
4-elements
Elements
Continued on the following page.
o Part Numberingo Part Numbering
2
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Please check the MURATA home page (http://www.murata.com/) if you cannot find the part number in the catalog.
Continued from the preceding page.
Continued on the following page.
25 to 85°C
25 to 85°C
25 to 85°C
25 to 125°C *6
-25 to 85°C
-25 to 85°C
-55 to 125°C
-55 to 105°C
-220±60ppm/°C
-330±60ppm/°C
-470±60ppm/°C
-750±120ppm/°C
±10%
±10%
±22%
±22%
R2H *1
S2H *1
T2H *1
U2J *1
B *2
B
X7S
X6S
6R
6S
6T
7U
B1
B3
C7
C8
-55 to 125°C
-55 to 125°C
-55 to 125°C
-55 to 125°C
-25 to 85°C
-25 to 85°C
-55 to 125°C
-55 to 105°C
tTemperature Characteristics
Code
Temperature Characteristic Codes Temperature Characteristics
20 to 85°C
20 to 125°C
20 to 85°C
20 to 85°C
20 to 85°C
20 to 85°C
20 to 125°C
20 to 85°C
20 to 85°C
20 to 85°C
20 to 85°C
20 to 85°C
20 to 125°C
25 to 125°C
25 to 150°C
25 to 125°C
25 to 85°C
20°C
20°C
20°C
20°C
20°C
20°C
20°C
20°C
20°C
20°C
20°C
20°C
20°C
25°C
25°C
25°C
25°C
Temperature
Range
Reference
Temperature
+350 to -1000ppm/°C
0±60ppm/°C
-150±60ppm/°C
-220±60ppm/°C
-330±60ppm/°C
-470±60ppm/°C
0±120ppm/°C
-150±120ppm/°C
-220±120ppm/°C
-330±120ppm/°C
-470±120ppm/°C
-750±120ppm/°C
0±250ppm/°C
0±30ppm/°C
0±30ppm/°C
0±60ppm/°C
-150±60ppm/°C
Capacitance Change or
Temperature Coefficient
SL *1
CH *1
PH *1
RH *1
SH *1
TH *1
CJ *1
PJ *1
RJ *1
SJ *1
TJ *1
UJ *1
CK *1
C0G *1
X8G *1
C0H *1
P2H *1
JIS
JIS
JIS
JIS
JIS
JIS
JIS
JIS
JIS
JIS
JIS
JIS
JIS
EIA
EIA
EIA
EIA
25°C
25°C
25°C
25°C
20°C
20°C
25°C
25°C
EIA
EIA
EIA
EIA
JIS
JIS
EIA
EIA
-25 to 85°C
-30 to 85°C
-55 to 150°C
-55 to 125°C
-55 to 125°C
-55 to 85°C
-55 to 125°C
-55 to 150°C
-55 to 125°C
+30, -80%
+22, -82%
+15, -40%
±15%
±15%
±15%
±15%
±15%
±10% *4
+22, -33% *5
F *2
Y5V
X8L
R *2
R
X5R
X7R
X8R
-
F1
F5
L8
R1
R3
R6
R7
R9
W0
-25 to 85°C
-30 to 85°C
-55 to 150°C
-55 to 125°C
-55 to 125°C
-55 to 85°C
-55 to 125°C
-55 to 150°C
-55 to 125°C
20°C
25°C
25°C
20°C
20°C
25°C
25°C
25°C
25°C
JIS
EIA
*3
JIS
JIS
EIA
EIA
EIA
-
-55 to 125°C +22, -33%X7TD7 -55 to 125°C25°CEIA
-55 to 105°C +22, -33%X6TD8 -55 to 105°C25°CEIA
-55 to 125°C +22, -56%X7UE7 -55 to 125°C25°CEIA
Public STD Code
1X
2C
2P
2R
2S
2T
3C
3P
3R
3S
3T
3U
4C
5C
5G
6C
6P
-55 to 125°C
-55 to 125°C
-25 to 85°C
-25 to 85°C
-25 to 85°C
-25 to 85°C
-55 to 125°C
-25 to 85°C
-25 to 85°C
-25 to 85°C
-25 to 85°C
-25 to 85°C
-55 to 125°C
-55 to 125°C
-55 to 150°C
-55 to 125°C
-55 to 125°C
Operating
Temperature Range
*1 Please refer to table for Capacitance Change under reference temperature.
*2 Capacitance change is specified with 50% rated voltage applied.
*3 Murata Temperature Characteristic Code.
*4 Apply DC350V bias.
*5 No DC bias.
*6 Rated Voltage 100Vdc max : 25 to 85°C
3
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Please check the MURATA home page (http://www.murata.com/) if you cannot find the part number in the catalog.
Continued from the preceding page.
Murata Code
Capacitance Change from 25°C (%)
–55°C –30°C –10°C
Max. Min. Max. Min. Max. Min.
5C/5G 0.58 –0.24 0.40 –0.17 0.25 –0.11
6C 0.87 –0.48 0.59 –0.33 0.38 –0.21
6P 2.33 0.72 1.61 0.50 1.02 0.32
6R 3.02 1.28 2.08 0.88 1.32 0.56
6S 4.09 2.16 2.81 1.49 1.79 0.95
6T 5.46 3.28 3.75 2.26 2.39 1.44
7U 8.78 5.04 6.04 3.47 3.84 2.21
EIA Code
4C 2.56 –1.88 1.54 –1.13 1.02 –0.75
3P 1.65 0.14 1.10 0.09
3R 2.03 0.45 1.35 0.30
3S 2.63 0.95 1.76 0.63
3T 3.40 1.58 2.27 1.05
3U 4.94 2.84 3.29 1.89
3C 1.37 –0.90 0.82 –0.54 0.55 –0.36
Murata Code
Capacitance Change from 20°C (%)
–55°C –25°C –10°C
Max. Min. Max. Min. Max. Min.
2C 0.82 –0.45 0.49 –0.27 0.33 –0.18
2P 1.32 0.41 0.88 0.27
2R 1.70 0.72 1.13 0.48
2S 2.30 1.22 1.54 0.81
2T 3.07 1.85 2.05 1.23
1X ––––––
oCapacitance Change from each temperature
JIS Code
uCapacitance
Expressed by three-digit alphanumerics. The unit is picofarad
(pF). The first and second figures are significant digits, and the
third figure expresses the number of zeros which follow the two
numbers.If there is a decimal point, it is expressed by the capital
letter "R." In this case, all figures are significant digits.
R50
1R0
100
103
Ex.)
0.5pF
1.0pF
10pF
10000pF
Code Capacitance
yRated Voltage
0E
0G
0J
1A
1C
1E
YA
1H
2A
2D
2E
YD
2H
2J
3A
3D
3F
BB
E2
GC
GF
GD
GB
DC2.5V
DC4V
DC6.3V
DC10V
DC16V
DC25V
DC35V
DC50V
DC100V
DC200V
DC250V
DC300V
DC500V
DC630V
DC1kV
DC2kV
DC3.15kV
DC350V (for Camera Flash Circuit)
AC250V
X1/Y2; AC250V (Safety Standard Certified Type GC)
Y2, X1/Y2; AC250V (Safety Standard Certified Type GF)
Y3; AC250V (Safety Standard Certified Type GD)
X2; AC250V (Safety Standard Certified Type GB)
Code Rated Voltage
Continued on the following page.
4
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Please check the MURATA home page (http://www.murata.com/) if you cannot find the part number in the catalog.
Continued from the preceding page.
Expressed by three figures.
oIndividual Specification Code (Except LLR)
iCapacitance Tolerance
Code
WGRM/GJM
Series
C
TC
±0.05pF
Capacitance Tolerance
V9.9pF 0.1pF
B
GRM/GJM
GQM
C±0.1pF
V9.9pF
V1pF
1.1 to 9.9pF
0.1pF
0.1pF
1pF Step and E24 Series
C
GRM/GJM
GRM
GQM
C
except C
C
±0.25pF
V9.9pF
V5pF
V1pF
1.1 to 9.9pF
0.1pF
* 1pF
0.1pF
1pF Step and E24 Series
D
GRM/GJM
GRM
GQM
C
except C
C
±0.5pF
5.1 to 9.9pF
5.1 to 9.9pF
5.1 to 9.9pF
0.1pF
* 1pF
1pF Step and E24 Series
GGJM
GQM
C
C
±2% U10pF
U10pF E12 Series
E24 Series
JGRM/GA3
GQM/GJM
C, SL, U2J
C
±5% U10pF
U10pF E12 Series
E24 Series
Capacitance Step
K
GRJ/GRM/GR7/GA3
GNM
GR4, GMD
B, R, X7R, X5R, ZLM
C0G
B, R, X7R, X5R, ZLM
±10% E6 Series
E6 Series
E12 Series
M
GRM/GMA
GNM
GA2
LLL/LLR/LLA/LLM
B, R, X7R, X7S
X5R, X7R, X7S
X7R
X5R, X7R, X7S, X6S
±20%
E6 Series
E3 Series
E3 Series
E3 Series
ZGRM
F, Y5V+80%, -20% E3 Series
RDepends on individual standards.
* E24 series is also available.
oESR (LLR Only)
Code
E01
E03
E05
E07
100m
220m
470m
1000m
ESR
!0Packaging
Code
L
D
E
K
J
F
B
C
T
ø180mm Embossed Taping
ø180mm Paper Taping
ø180mm Paper Taping (LLL15)
ø330mm Embossed Taping
ø330mm Paper Taping
ø330mm Paper Taping (LLL15)
Bulk
Bulk Case
Bulk Tray
Packaging
5
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Selection Guide For Chip Monolithic Ceramic Capacitors
6
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Applications?
GRM (X5R, X7R, Y5V etc.)
68pF–100µF
GNM
10pF–2.2µF
GRM (C0G)
0.1pF–0.1µF
GRM (U2J etc.)
LLL
2200pF–10µF
LLA/LLM (From 1GHz)
0.01µF–4.7µF
GJM (500MHz to 10GHz)
0.1pF–33pF
GQM (500MHz to 10GHz)
0.1pF–100pF
GMA 100pF–0.47µF
GMD 100pF–1µF
GRM (C0G, U2J)
10pF–10000pF
GRM (C0G)
5pF–47pF
GRM (X7R)
220pF–1µF
GR7
10000pF–47000pF
GR4
100pF–10000pF
Type GD 10pF–4700pF
Type GF 10pF–4700pF
Type GC 100pF–330pF
Type GF 470pF–4700pF
Type GB 10000pF–56000pF
GA2
470pF–0.1µF
GCM (X7R etc.)
100pF–47µF
GCM (C0G etc.)
1.0pF–56000pF
High Capacitance
Array (2 or 4 Elements)
Class 1 TC's
Low Inductance
(Reverse Geometry)
LLR
1.0µF
Low Inductance
(Controlled ESR)
Low Inductance
(Multi-Termination)
Low ESR, Ultra Small
Lowest ESR
Wire-Die-Bonding
250V/630V/1kV/2kV/3.15kV
Low Dissipation
3.15kV
Low Dissipation
250V/630V/1kV
High Capacitance
GRJ (X7R)
470pF–1µF
250V/630V/1kV
Soft Termination Type
350V
High Capacitance
2kV
High Capacitance
Safety Standard
Certified
Safety Standard
Certified
AC250V which meets
Japanese Law
High Capacitance
Class 1 TC's
250V/630V
Low Dissipation
Medium Voltage
High Frequency Snubber
Optical Communications
High Frequency
High Speed Decoupling
Frequency Control/Tuning,
Impedance Matching
Decoupling, Smoothing
Automotive
(Powertrain,
Safety Equipment)
Medium Voltage
LCD Backlight Inverter
Medium Voltage
Decoupling, Smoothing
Medium Voltage
Only for Camera Flash Circuit
GCM (U2J)
10pF–10000pF
250V/630V
Soft Termination Type GCJ (X7R)
1000pF–0.47µF
Medium Voltage for Automotive
(Powertrain, Safety Equipment)
AC Lines Noise Removal
Medium Voltage
Only for
Information Devices
Function Type Series
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
For General Purpose GRM Series 8
Specifications and Test Methods 51
Reference Data 61
Capacitor Array GNM Series 64
Specifications and Test Methods 70
Low ESL LLL/LLR/LLA/LLM Series 76
Specifications and Test Methods 83
High-Q Type GJM Series 87
Specifications and Test Methods 97
High Frequency GQM Series 100
Specifications and Test Methods 108
Reference Data 111
Monolithic Microchip GMA Series 112
Specifications and Test Methods 115
For Bonding GMD Series 119
Specifications and Test Methods 124
Package 128
!Caution 132
Notice 144
Reference Data 151
Chip Monolithic Ceramic Capacitors
1
2
3
4
5
6
7
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
8
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Chip Monolithic Ceramic Capacitors
For General Purpose GRM Series
Features
1. Higher resistance of solder-leaching due to
the Ni-barriered termination, applicable for
reflow-soldering, and flow-soldering
(GRM18/21/31 type only).
2. The GRM series is a lead free product.
3. Smaller size and higher capacitance value.
4. High reliability and no polarity.
5. Excellent pulse response and noise reduction
due to the low impedance at high frequency.
6. The GRM series is available in paper or embossed
tape and reel packaging for automatic placement.
Bulk case packaging is also available for GRM15/
18/21(T=0.6,1.25).
7. TA replacement.
Applications
General electronic equipment
Part Number
LW T
Dimensions (mm)
e
g min.
0.4 ±0.02
0.6 ±0.03
1.0 ±0.05
1.6 ±0.1
2.0 ±0.1
3.2 ±0.15
3.2 ±0.2
3.2 ±0.3
0.2 ±0.02
0.3 ±0.03
0.5 ±0.05
0.8 ±0.1
1.25 ±0.1
1.6 ±0.15
1.6 ±0.2
2.5 ±0.2
0.2 ±0.02
0.3 ±0.03
0.25 ±0.05
0.3 ±0.03
0.5 ±0.05
0.5 +0/-0.1
0.8 ±0.1
0.6 ±0.1
0.85 ±0.1
1.0 +0/-0.2
1.25 ±0.1
0.6 ±0.1
0.85 ±0.1
1.15 ±0.1
1.6 ±0.2
0.85 +0.15/-0.05
1.0 +0/-0.2
1.15 ±0.1
1.35 ±0.15
1.6 ±0.2
1.8 ±0.2
2.0 ±0.2
2.5 ±0.2
0.07 to 0.14
0.1 to 0.2
0.1 to 0.3
0.15 to 0.35
0.2 to 0.5
0.2 to 0.7
0.3 to 0.8
0.3 min.
0.13
0.2
0.4
0.3
0.5
0.7
1.5
1.0
* Bulk Case: 1.6 ±0.07(L)g0.8 ±0.07(W)g0.8 ±0.07(T)
The figures indicate typical specification.
GRM022
GRM033
GRM15X
GRM153
GRM155
GRM185
GRM188*
GRM216
GRM219
GRM21A
GRM21B
GRM316
GRM319
GRM31M
GRM31C
GRM329
GRM32A
GRM32M
GRM32N
GRM32C
GRM32R
GRM32D
GRM32E
L
T
W
e eg
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Capacitance Table
9
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued on the following page.
Temperature Compensating Type C0G(5C),U2J(7U) Characteristics
16
(1C)
6ex.6: T Dimension [mm]
LxW
[mm]
Rated Voltage
[Vdc]
Capacitance
0.4x0.2
(02)
<01005>
10
(1A)6.3
(0J)
0.6x0.3
(03)
<0201>
50
(1H)
1.0x0.5
(15)
<0402>
50
(1H)
1.6x0.8
(18)
<0603>
100
(1E)50
(1H)
2.0x1.25
(21)
<0805>
100
(1E)50
(1H)
3.2x1.6
(31)
<1206>
100
(1E)50
(1H)
0.6x0.3
(03)
<0201>
50
(1H)25
(1E)
1.0x0.5
(15)
<0402>
50
(1H)10
(1A)
1.6x0.8
(18)
<0603>
50
(1H)10
(1A)
2.0x1.25
(21)
<0805>
50
(1H)10
(1A)
3.2x1.6
(31)
<1206>
50
(1H)
TC C0G(5C) U2J(7U)
0.1pF(R10)
0.2pF(R20)
0.3pF(R30)
0.4pF(R40)
0.5pF(R50)
0.6pF(R60)
0.7pF(R70)
0.8pF(R80)
0.9pF(R90)
1.0pF(1R0)
1.1pF(1R1)
1.2pF(1R2)
1.3pF(1R3)
1.4pF(1R4)
1.5pF(1R5)
1.6pF(1R6)
1.7pF(1R7)
1.8pF(1R8)
1.9pF(1R9)
2.0pF(2R0)
2.1pF(2R1)
2.2pF(2R2)
2.3pF(2R3)
2.4pF(2R4)
2.5pF(2R5)
2.6pF(2R6)
2.7pF(2R7)
2.8pF(2R8)
2.9pF(2R9)
3.0pF(3R0)
3.1pF(3R1)
3.2pF(3R2)
3.3pF(3R3)
3.4pF(3R4)
3.5pF(3R5)
3.6pF(3R6)
3.7pF(3R7)
3.8pF(3R8)
3.9pF(3R9)
4.0pF(4R0)
4.1pF(4R1)
4.2pF(4R2)
4.3pF(4R3)
4.4pF(4R4)
4.5pF(4R5)
4.6pF(4R6)
4.7pF(4R7)
4.8pF(4R8)
4.9pF(4R9)
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3
3
3
3
5
5
5
5
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Capacitance Table
10
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
Continued on the following page.
16
(1C)
6ex.6: T Dimension [mm]
LxW
[mm]
Rated Voltage
[Vdc]
Capacitance
0.4x0.2
(02)
<01005>
10
(1A)6.3
(0J)
0.6x0.3
(03)
<0201>
50
(1H)
1.0x0.5
(15)
<0402>
50
(1H)
1.6x0.8
(18)
<0603>
100
(1E)50
(1H)
2.0x1.25
(21)
<0805>
100
(1E)50
(1H)
3.2x1.6
(31)
<1206>
100
(1E)50
(1H)
0.6x0.3
(03)
<0201>
50
(1H)25
(1E)
1.0x0.5
(15)
<0402>
50
(1H)10
(1A)
1.6x0.8
(18)
<0603>
50
(1H)10
(1A)
2.0x1.25
(21)
<0805>
50
(1H)10
(1A)
3.2x1.6
(31)
<1206>
50
(1H)
TC C0G(5C) U2J(7U)
5.0pF(5R0)
5.1pF(5R1)
5.2pF(5R2)
5.3pF(5R3)
5.4pF(5R4)
5.5pF(5R5)
5.6pF(5R6)
5.7pF(5R7)
5.8pF(5R8)
5.9pF(5R9)
6.0pF(6R0)
6.1pF(6R1)
6.2pF(6R2)
6.3pF(6R3)
6.4pF(6R4)
6.5pF(6R5)
6.6pF(6R6)
6.7pF(6R7)
6.8pF(6R8)
6.9pF(6R9)
7.0pF(7R0)
7.1pF(7R1)
7.2pF(7R2)
7.3pF(7R3)
7.4pF(7R4)
7.5pF(7R5)
7.6pF(7R6)
7.7pF(7R7)
7.8pF(7R8)
7.9pF(7R9)
8.0pF(8R0)
8.1pF(8R1)
8.2pF(8R2)
8.3pF(8R3)
8.4pF(8R4)
8.5pF(8R5)
8.6pF(8R6)
8.7pF(8R7)
8.8pF(8R8)
8.9pF(8R9)
9.0pF(9R0)
9.1pF(9R1)
9.2pF(9R2)
9.3pF(9R3)
9.4pF(9R4)
9.5pF(9R5)
9.6pF(9R6)
9.7pF(9R7)
9.8pF(9R8)
9.9pF(9R9)
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3
3
3
3
3
5
5
5
5
5
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Capacitance Table
11
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
10pF(100)
12pF(120)
15pF(150)
18pF(180)
22pF(220)
27pF(270)
33pF(330)
39pF(390)
47pF(470)
56pF(560)
68pF(680)
82pF(820)
100pF(101)
120pF(121)
150pF(151)
180pF(181)
220pF(221)
270pF(271)
330pF(331)
390pF(391)
470pF(471)
560pF(561)
680pF(681)
820pF(821)
1000pF(102)
1200pF(122)
1500pF(152)
1800pF(182)
2200pF(222)
2700pF(272)
3300pF(332)
3900pF(392)
4700pF(472)
5600pF(562)
6800pF(682)
8200pF(822)
10000pF(103)
12000pF(123)
15000pF(153)
18000pF(183)
22000pF(223)
27000pF(273)
33000pF(333)
39000pF(393)
47000pF(473)
56000pF(563)
68000pF(683)
82000pF(823)
0.1µF(104)
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
16
(1C)
6ex.6: T Dimension [mm]
LxW
[mm]
Rated Voltage
[Vdc]
Capacitance
0.4x0.2
(02)
<01005>
10
(1A)6.3
(0J)
0.6x0.3
(03)
<0201>
50
(1H)
1.0x0.5
(15)
<0402>
50
(1H)
1.6x0.8
(18)
<0603>
100
(1E)50
(1H)
2.0x1.25
(21)
<0805>
100
(1E)50
(1H)
3.2x1.6
(31)
<1206>
100
(1E)50
(1H)
0.6x0.3
(03)
<0201>
50
(1H)25
(1E)
1.0x0.5
(15)
<0402>
50
(1H)10
(1A)
1.6x0.8
(18)
<0603>
50
(1H)10
(1A)
2.0x1.25
(21)
<0805>
50
(1H)10
(1A)
3.2x1.6
(31)
<1206>
50
(1H)
TC C0G(5C) U2J(7U)
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
3, 5
5
5
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
9
9
9
9
9
9
B
B
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
M
M
C
C
C
3
3
3
3
3
3
3
3
3
3
3
3
3
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
8
8
8
8
5, 8
5, 8
5, 8
5, 8
5, 8
8
8
8
8
5
5
5
5
8
8
8
8
6
6
6
6
9
9
A
B
B
9
M
M
M
9
B
B
B
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Capacitance Table
12
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Temperature Compensating Type P2H(6P),R2H(6R),S2H(6S),T2H(6T) Characteristics
50
(1H)
6ex.6: T Dimension [mm]
LxW
[mm]
Rated Voltage
[Vdc]
Capacitance
1.0pF(1R0)
2.0pF(2R0)
3.0pF(3R0)
4.0pF(4R0)
5.0pF(5R0)
6.0pF(6R0)
7.0pF(7R0)
8.0pF(8R0)
9.0pF(9R0)
10pF(100)
12pF(120)
15pF(150)
18pF(180)
22pF(220)
27pF(270)
33pF(330)
39pF(390)
47pF(470)
56pF(560)
68pF(680)
82pF(820)
100pF(101)
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
25
(1E)
0.6x0.3
(03)
<0201>
50
(1H)
1.0x0.5
(15)
<0402>
25
(1E)50
(1H)25
(1E)50
(1H)
1.0x0.5
(15)
<0402>
0.6x0.3
(03)
<0201>
1.0x0.5
(15)
<0402>
0.6x0.3
(03)
<0201>
1.0x0.5
(15)
<0402>
TC P2H
(6P)R2H
(6R)S2H
(6S)T2H
(6T)
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Capacitance Table
13
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
Continued on the following page.
High Dielectric Constant Type X7R(R7)/X7S(C7)/X7T(D7)/X7U(E7) Characteristics
0.4x0.2
(02)
<01005>
0.6x0.3
(03)
<0201>
1.0x0.5
(15)
<0402>
1.6x0.8
(18)
<0603>
10
(1A)
5ex.5: T Dimension [mm]
LxW
[mm]
Rated Voltage
[Vdc]
Capacitance
68pF(680)
100pF(101)
150pF(151)
220pF(221)
330pF(331)
470pF(471)
680pF(681)
1000pF(102)
1500pF(152)
2200pF(222)
3300pF(332)
4700pF(472)
6800pF(682)
10000pF(103)
15000pF(153)
22000pF(223)
33000pF(333)
47000pF(473)
68000pF(683)
0.10µF(104)
0.15µF(154)
0.22µF(224)
0.33µF(334)
0.47µF(474)
0.68µF(684)
1.0µF(105)
2.2µF(225)
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
25
(1E)16
(1C)10
(1A)6.3
(0J)100
(2A)50
(1H)25
(1E)16
(1C)10
(1A)100
(2A)50
(1H)25
(1E)16
(1C)10
(1A)6.3
(0J)4
(0G)
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
5
5
5
5
5
5
5
5
5
X, 5
X, 5
X, 5
X, 5
X, 5
X, 5
5
5
5
5
5
5
5
X
5
5
5
5
5
5
5
X
X
X
X
5
5
5
5
5
5
5
5
5
5
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
5, 8
888
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Capacitance Table
14
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
High Dielectric Constant Type X6S(C8)/X6T(D8) Characteristics
0.6x0.3
(03)
<0201>
1.0x0.5
(15)
<0402>
6.3
(0J)4
(0G)
5ex.5: T Dimension [mm]
LxW
[mm]
Rated Voltage
[Vdc]
Capacitance
15000pF(153)
22000pF(223)
33000pF(333)
47000pF(473)
68000pF(683)
0.10µF(104)
0.15µF(154)
0.22µF(224)
0.33µF(334)
0.47µF(474)
0.68µF(684)
25
(1E)6.3
(0J)4
(0G)
3
3
3
3
3
3
3
3
5
5
5
5
5
5
5#
5
5
5
5
5
1.6x0.8
(18)
<0603>
2.0x1.25
(21)
<0805>
3.2x1.6
(31)
<1206>
LxW
[mm]
Rated Voltage
[Vdc]
Capacitance
1.0µF(105)
2.2µF(225)
4.7µF(475)
10µF(106)
22µF(226)
47µF(476)
100µF(107)
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
# These Part Numbers have individual testing conditions on Durability of GRM Series Specifications and Test Methods (2). Please refer to P60.
10
(1A)
25
(1E)6.3
(0J)4
(0G)25
(1E)16
(1C)10
(1A)6.3
(0J)4
(0G)25
(1E)16
(1C)10
(1A)6.3
(0J)4
(0G)
2.5
(0E)
5
8
85
8
8
8
#
B
8
6
9
B9
B
9
9, B
B#B
C
6
9
M9
C
9
C
CC
C
3.2x2.5
(32)
<1210>
25
(1E)10
(1A)6.3
(0J)4
(0G)
D
EN
EE
EE
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
# These Part Numbers have individual testing conditions on Durability of GRM Series Specifications and Test Methods (2). Please refer to P60.
3.2x1.6
(31)
<1206>
3.2x2.5
(32)
<1210>
LxW
[mm]
Rated Voltage
[Vdc]
Capacitance
6800pF(682)
10000pF(103)
15000pF(153)
22000pF(223)
33000pF(333)
47000pF(473)
68000pF(683)
0.10µF(104)
0.15µF(154)
0.22µF(224)
0.33µF(334)
0.47µF(474)
0.68µF(684)
1.0µF(105)
2.2µF(225)
4.7µF(475)
10µF(106)
22µF(226)
47µF(476)
100µF(107)
100
(2A)50
(1H)25
(1E)16
(1C)10
(1A)6.3
(0J)4
(0G)100
(2A)50
(1H)35
(YA)25
(1E)16
(1C)10
(1A)6.3
(0J)4
(0G)
9
B
B
B
B
B
A
A
B
9
B
B
B
B
B
9
B
B
9
B
B
B
B
9
9
9, B
B
9
B
B
B
B
B
BB
B
9
M
M
M
M
9
M
M
M
M
C
M
M
9
M
M
M
C
C
9
9
9
M
C
C
M
9
#
, C
CC
CC
C
C
C
E
E
ED
EEE
EE
E
2.0x1.25
(21)
<0805>
100
(2A)50
(1H)25
(1E)16
(1C)10
(1A)6.3
(0J)4
(0G)
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Capacitance Table
15
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
Continued on the following page.
High Dielectric Constant Type X5R(R6) Characteristics
0.4x0.2
(02)
<01005>
0.6x0.3
(03)
<0201>
1.0x0.5
(15)
<0402>
1.6x0.8
(18)
<0603>
10
(1A)6.3
(0J)25
(1E)16
(1C)10
(1A)6.3
(0J)100
(2A)50
(1H)25
(1E)16
(1C)10
(1A)6.3
(0J)100
(2A)50
(1H)25
(1E)16
(1C)10
(1A)6.3
(0J)4
(0G)
5ex.5: T Dimension [mm] : Please refer to X7R(R7) etc. Characteristics.
LxW
[mm]
Rated Voltage
[Vdc]
Capacitance
68pF(680)
100pF(101)
150pF(151)
220pF(221)
330pF(331)
470pF(471)
680pF(681)
1000pF(102)
1500pF(152)
2200pF(222)
3300pF(332)
4700pF(472)
6800pF(682)
10000pF(103)
15000pF(153)
22000pF(223)
33000pF(333)
47000pF(473)
68000pF(683)
0.10µF(104)
0.15µF(154)
0.22µF(224)
0.33µF(334)
0.47µF(474)
0.68µF(684)
1.0µF(105)
2.2µF(225)
4.7µF(475)
10µF(106)
22µF(226)
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
33
3
3
3
3
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
8
8
8
8
8
8
8
8
8
8
8
5, 8
8
8
5
8
8
88
8
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
Capacitance Table
16
2.0x1.25
(21)
<0805>
3.2x1.6
(31)
<1206>
3.2x2.5
(32)
<1210>
100
(2A)50
(1H)25
(1E)16
(1C)10
(1A)6.3
(0J)4
(0G)100
(2A)50
(1H)25
(1E)16
(1C)10
(1A)6.3
(0J)4
(0G)100
(2A)50
(1H)35
(YA)25
(1E)16
(1C)10
(1A)6.3
(0J)
LxW
[mm]
Rated Voltage
[Vdc]
Capacitance
6800pF(682)
10000pF(103)
15000pF(153)
22000pF(223)
33000pF(333)
47000pF(473)
68000pF(683)
0.10µF(104)
0.15µF(154)
0.22µF(224)
0.33µF(334)
0.47µF(474)
0.68µF(684)
1.0µF(105)
2.2µF(225)
4.7µF(475)
10µF(106)
22µF(226)
47µF(476)
100µF(107)
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
4
(0G)
6
9, B
B
6, B
9, B
9, B
B
B
9, B
9, B
B
9, B
B9
C6
9,C
C
9,C
9, C
C
9
C
C
C
C
CC
ED
E
EE
E
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
17
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
16(1C)
GRM0225C1CR20WD05L
GRM0225C1CR20BD05L
GRM0225C1CR30WD05L
GRM0225C1CR30BD05L
GRM0225C1CR40WD05L
GRM0225C1CR40BD05L
GRM0225C1CR50WD05L
GRM0225C1CR50BD05L
GRM0225C1CR60WD05L
GRM0225C1CR60BD05L
GRM0225C1CR70WD05L
GRM0225C1CR70BD05L
GRM0225C1CR80WD05L
GRM0225C1CR80BD05L
GRM0225C1CR90WD05L
GRM0225C1CR90BD05L
GRM0225C1C1R0WD05L
GRM0225C1C1R0BD05L
GRM0225C1C1R0CD05L
GRM0225C1C1R1WD05L
GRM0225C1C1R1BD05L
GRM0225C1C1R1CD05L
GRM0225C1C1R2WD05L
GRM0225C1C1R2BD05L
GRM0225C1C1R2CD05L
GRM0225C1C1R3WD05L
GRM0225C1C1R3BD05L
GRM0225C1C1R3CD05L
GRM0225C1C1R4WD05L
GRM0225C1C1R4BD05L
GRM0225C1C1R4CD05L
GRM0225C1C1R5WD05L
GRM0225C1C1R5BD05L
GRM0225C1C1R5CD05L
GRM0225C1C1R6WD05L
GRM0225C1C1R6BD05L
GRM0225C1C1R6CD05L
GRM0225C1C1R7WD05L
GRM0225C1C1R7BD05L
GRM0225C1C1R7CD05L
GRM0225C1C1R8WD05L
GRM0225C1C1R8BD05L
GRM0225C1C1R8CD05L
GRM0225C1C1R9WD05L
GRM0225C1C1R9BD05L
GRM0225C1C1R9CD05L
50(1H)
GRM0335C1HR10WD01D
GRM0335C1HR10BD01D
GRM0335C1HR20WD01D
GRM0335C1HR20BD01D
GRM0335C1HR30WD01D
GRM0335C1HR30BD01D
GRM0335C1HR40WD01D
GRM0335C1HR40BD01D
GRM0335C1HR50WD01D
GRM0335C1HR50BD01D
GRM0335C1HR60WD01D
GRM0335C1HR60BD01D
GRM0335C1HR70WD01D
GRM0335C1HR70BD01D
GRM0335C1HR80WD01D
GRM0335C1HR80BD01D
GRM0335C1HR90WD01D
GRM0335C1HR90BD01D
GRM0335C1H1R0WD01D
GRM0335C1H1R0BD01D
GRM0335C1H1R0CD01D
GRM0335C1H1R1WD01D
GRM0335C1H1R1BD01D
GRM0335C1H1R1CD01D
GRM0335C1H1R2WD01D
GRM0335C1H1R2BD01D
GRM0335C1H1R2CD01D
GRM0335C1H1R3WD01D
GRM0335C1H1R3BD01D
GRM0335C1H1R3CD01D
GRM0335C1H1R4WD01D
GRM0335C1H1R4BD01D
GRM0335C1H1R4CD01D
GRM0335C1H1R5WD01D
GRM0335C1H1R5BD01D
GRM0335C1H1R5CD01D
GRM0335C1H1R6WD01D
GRM0335C1H1R6BD01D
GRM0335C1H1R6CD01D
GRM0335C1H1R7WD01D
GRM0335C1H1R7BD01D
GRM0335C1H1R7CD01D
GRM0335C1H1R8WD01D
GRM0335C1H1R8BD01D
GRM0335C1H1R8CD01D
GRM0335C1H1R9WD01D
GRM0335C1H1R9BD01D
GRM0335C1H1R9CD01D
50(1H)
GRM1555C1HR10WA01D
GRM1555C1HR10BA01D
GRM1555C1HR20WA01D
GRM1555C1HR20BA01D
GRM1555C1HR30WA01D
GRM1555C1HR30BA01D
GRM1555C1HR40WA01D
GRM1555C1HR40BA01D
GRM1555C1HR50WA01D
GRM1555C1HR50BA01D
GRM1555C1HR60WA01D
GRM1555C1HR60BA01D
GRM1555C1HR70WA01D
GRM1555C1HR70BA01D
GRM1555C1HR80WA01D
GRM1555C1HR80BA01D
GRM1555C1HR90WA01D
GRM1555C1HR90BA01D
GRM1555C1H1R0WA01D
GRM1555C1H1R0BA01D
GRM1555C1H1R0CA01D
GRM1555C1H1R1WA01D
GRM1555C1H1R1BA01D
GRM1555C1H1R1CA01D
GRM1555C1H1R2WA01D
GRM1555C1H1R2BA01D
GRM1555C1H1R2CA01D
GRM1555C1H1R3WA01D
GRM1555C1H1R3BA01D
GRM1555C1H1R3CA01D
GRM1555C1H1R4WA01D
GRM1555C1H1R4BA01D
GRM1555C1H1R4CA01D
GRM1555C1H1R5WA01D
GRM1555C1H1R5BA01D
GRM1555C1H1R5CA01D
GRM1555C1H1R6WA01D
GRM1555C1H1R6BA01D
GRM1555C1H1R6CA01D
GRM1555C1H1R7WA01D
GRM1555C1H1R7BA01D
GRM1555C1H1R7CA01D
GRM1555C1H1R8WA01D
GRM1555C1H1R8BA01D
GRM1555C1H1R8CA01D
GRM1555C1H1R9WA01D
GRM1555C1H1R9BA01D
GRM1555C1H1R9CA01D
0.4x0.2(02)<01005> 0.6x0.3(03)<0201> 1.0x0.5(15)<0402>
0.1pF(R10)
0.2pF(R20)
0.3pF(R30)
0.4pF(R40)
0.5pF(R50)
0.6pF(R60)
0.7pF(R70)
0.8pF(R80)
0.9pF(R90)
1.0pF(1R0)
1.1pF(1R1)
1.2pF(1R2)
1.3pF(1R3)
1.4pF(1R4)
1.5pF(1R5)
1.6pF(1R6)
1.7pF(1R7)
1.8pF(1R8)
1.9pF(1R9)
±0.05pF(W)
±0.1pF(B)
±0.05pF(W)
±0.1pF(B)
±0.05pF(W)
±0.1pF(B)
±0.05pF(W)
±0.1pF(B)
±0.05pF(W)
±0.1pF(B)
±0.05pF(W)
±0.1pF(B)
±0.05pF(W)
±0.1pF(B)
±0.05pF(W)
±0.1pF(B)
±0.05pF(W)
±0.1pF(B)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
Temperature Compensating Type C0G(5C) Characteristics
GR M 02 2 5C 1C R20 W D05 L
Packaging Code in Part Number shows STD 180mm Reel Taping.
qProduct ID wSeries eDimensions (LxW) rDimension (T)
tTemperature Characteristics yRated Voltage uCapacitance
iCapacitance Tolerance oIndividual Specification Code !0Packaging*
(Part Number)
wq e r t y u i o !0
*GRM022: D is applicable.
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
18
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
16(1C)
GRM0225C1C2R1WD05L
GRM0225C1C2R1BD05L
GRM0225C1C2R1CD05L
GRM0225C1C2R2WD05L
GRM0225C1C2R2BD05L
GRM0225C1C2R2CD05L
GRM0225C1C2R3WD05L
GRM0225C1C2R3BD05L
GRM0225C1C2R3CD05L
GRM0225C1C2R4WD05L
GRM0225C1C2R4BD05L
GRM0225C1C2R4CD05L
GRM0225C1C2R5WD05L
GRM0225C1C2R5BD05L
GRM0225C1C2R5CD05L
GRM0225C1C2R6WD05L
GRM0225C1C2R6BD05L
GRM0225C1C2R6CD05L
GRM0225C1C2R7WD05L
GRM0225C1C2R7BD05L
GRM0225C1C2R7CD05L
GRM0225C1C2R8WD05L
GRM0225C1C2R8BD05L
GRM0225C1C2R8CD05L
GRM0225C1C2R9WD05L
GRM0225C1C2R9BD05L
GRM0225C1C2R9CD05L
GRM0225C1C3R0WD05L
GRM0225C1C3R0BD05L
GRM0225C1C3R0CD05L
GRM0225C1C3R1WD05L
GRM0225C1C3R1BD05L
GRM0225C1C3R1CD05L
GRM0225C1C3R2WD05L
GRM0225C1C3R2BD05L
GRM0225C1C3R2CD05L
GRM0225C1C3R3WD05L
GRM0225C1C3R3BD05L
GRM0225C1C3R3CD05L
GRM0225C1C3R4WD05L
GRM0225C1C3R4BD05L
GRM0225C1C3R4CD05L
GRM0225C1C3R5WD05L
GRM0225C1C3R5BD05L
GRM0225C1C3R5CD05L
0.4x0.2(02)<01005> 50(1H)
GRM0335C1H2R1WD01D
GRM0335C1H2R1BD01D
GRM0335C1H2R1CD01D
GRM0335C1H2R2WD01D
GRM0335C1H2R2BD01D
GRM0335C1H2R2CD01D
GRM0335C1H2R3WD01D
GRM0335C1H2R3BD01D
GRM0335C1H2R3CD01D
GRM0335C1H2R4WD01D
GRM0335C1H2R4BD01D
GRM0335C1H2R4CD01D
GRM0335C1H2R5WD01D
GRM0335C1H2R5BD01D
GRM0335C1H2R5CD01D
GRM0335C1H2R6WD01D
GRM0335C1H2R6BD01D
GRM0335C1H2R6CD01D
GRM0335C1H2R7WD01D
GRM0335C1H2R7BD01D
GRM0335C1H2R7CD01D
GRM0335C1H2R8WD01D
GRM0335C1H2R8BD01D
GRM0335C1H2R8CD01D
GRM0335C1H2R9WD01D
GRM0335C1H2R9BD01D
GRM0335C1H2R9CD01D
GRM0335C1H3R0WD01D
GRM0335C1H3R0BD01D
GRM0335C1H3R0CD01D
GRM0335C1H3R1WD01D
GRM0335C1H3R1BD01D
GRM0335C1H3R1CD01D
GRM0335C1H3R2WD01D
GRM0335C1H3R2BD01D
GRM0335C1H3R2CD01D
GRM0335C1H3R3WD01D
GRM0335C1H3R3BD01D
GRM0335C1H3R3CD01D
GRM0335C1H3R4WD01D
GRM0335C1H3R4BD01D
GRM0335C1H3R4CD01D
GRM0335C1H3R5WD01D
GRM0335C1H3R5BD01D
GRM0335C1H3R5CD01D
0.6x0.3(03)<0201> 50(1H)
GRM1555C1H2R1WA01D
GRM1555C1H2R1BA01D
GRM1555C1H2R1CA01D
GRM1555C1H2R2WA01D
GRM1555C1H2R2BA01D
GRM1555C1H2R2CA01D
GRM1555C1H2R3WA01D
GRM1555C1H2R3BA01D
GRM1555C1H2R3CA01D
GRM1555C1H2R4WA01D
GRM1555C1H2R4BA01D
GRM1555C1H2R4CA01D
GRM1555C1H2R5WA01D
GRM1555C1H2R5BA01D
GRM1555C1H2R5CA01D
GRM1555C1H2R6WA01D
GRM1555C1H2R6BA01D
GRM1555C1H2R6CA01D
GRM1555C1H2R7WA01D
GRM1555C1H2R7BA01D
GRM1555C1H2R7CA01D
GRM1555C1H2R8WA01D
GRM1555C1H2R8BA01D
GRM1555C1H2R8CA01D
GRM1555C1H2R9WA01D
GRM1555C1H2R9BA01D
GRM1555C1H2R9CA01D
GRM1555C1H3R0WA01D
GRM1555C1H3R0BA01D
GRM1555C1H3R0CA01D
GRM1555C1H3R1WA01D
GRM1555C1H3R1BA01D
GRM1555C1H3R1CA01D
GRM1555C1H3R2WA01D
GRM1555C1H3R2BA01D
GRM1555C1H3R2CA01D
GRM1555C1H3R3WA01D
GRM1555C1H3R3BA01D
GRM1555C1H3R3CA01D
GRM1555C1H3R4WA01D
GRM1555C1H3R4BA01D
GRM1555C1H3R4CA01D
GRM1555C1H3R5WA01D
GRM1555C1H3R5BA01D
GRM1555C1H3R5CA01D
1.0x0.5(15)<0402>
2.1pF(2R1)
2.2pF(2R2)
2.3pF(2R3)
2.4pF(2R4)
2.5pF(2R5)
2.6pF(2R6)
2.7pF(2R7)
2.8pF(2R8)
2.9pF(2R9)
3.0pF(3R0)
3.1pF(3R1)
3.2pF(3R2)
3.3pF(3R3)
3.4pF(3R4)
3.5pF(3R5)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
Temperature Compensating Type C0G(5C) Characteristics
GRM0225C1C2R0WD05L
GRM0225C1C2R0BD05L
GRM0225C1C2R0CD05L
GRM0335C1H2R0WD01D
GRM0335C1H2R0BD01D
GRM0335C1H2R0CD01D
GRM1555C1H2R0WA01D
GRM1555C1H2R0BA01D
GRM1555C1H2R0CA01D
2.0pF(2R0)±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
GR M 02 2 5C 1C 2R0 W D05 L
Packaging Code in Part Number shows STD 180mm Reel Taping.
qProduct ID wSeries eDimensions (LxW) rDimension (T)
tTemperature Characteristics yRated Voltage uCapacitance
iCapacitance Tolerance oIndividual Specification Code !0Packaging*
(Part Number)
wq e r t y u i o !0
*GRM022: D is applicable.
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
19
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
16(1C)
GRM0225C1C3R8WD05L
GRM0225C1C3R8BD05L
GRM0225C1C3R8CD05L
GRM0225C1C3R9WD05L
GRM0225C1C3R9BD05L
GRM0225C1C3R9CD05L
GRM0225C1C4R0WD05L
GRM0225C1C4R0BD05L
GRM0225C1C4R0CD05L
GRM0225C1C4R1WD05L
GRM0225C1C4R1BD05L
GRM0225C1C4R1CD05L
GRM0225C1C4R2WD05L
GRM0225C1C4R2BD05L
GRM0225C1C4R2CD05L
GRM0225C1C4R3WD05L
GRM0225C1C4R3BD05L
GRM0225C1C4R3CD05L
GRM0225C1C4R4WD05L
GRM0225C1C4R4BD05L
GRM0225C1C4R4CD05L
GRM0225C1C4R5WD05L
GRM0225C1C4R5BD05L
GRM0225C1C4R5CD05L
GRM0225C1C4R6WD05L
GRM0225C1C4R6BD05L
GRM0225C1C4R6CD05L
GRM0225C1C4R7WD05L
GRM0225C1C4R7BD05L
GRM0225C1C4R7CD05L
GRM0225C1C4R8WD05L
GRM0225C1C4R8BD05L
GRM0225C1C4R8CD05L
GRM0225C1C4R9WD05L
GRM0225C1C4R9BD05L
GRM0225C1C4R9CD05L
GRM0225C1C5R0WD05L
GRM0225C1C5R0BD05L
GRM0225C1C5R0CD05L
GRM0225C1C5R1WD05L
GRM0225C1C5R1BD05L
GRM0225C1C5R1CD05L
GRM0225C1C5R1DD05L
0.4x0.2(02)<01005> 50(1H)
GRM0335C1H3R8WD01D
GRM0335C1H3R8BD01D
GRM0335C1H3R8CD01D
GRM0335C1H3R9WD01D
GRM0335C1H3R9BD01D
GRM0335C1H3R9CD01D
GRM0335C1H4R0WD01D
GRM0335C1H4R0BD01D
GRM0335C1H4R0CD01D
GRM0335C1H4R1WD01D
GRM0335C1H4R1BD01D
GRM0335C1H4R1CD01D
GRM0335C1H4R2WD01D
GRM0335C1H4R2BD01D
GRM0335C1H4R2CD01D
GRM0335C1H4R3WD01D
GRM0335C1H4R3BD01D
GRM0335C1H4R3CD01D
GRM0335C1H4R4WD01D
GRM0335C1H4R4BD01D
GRM0335C1H4R4CD01D
GRM0335C1H4R5WD01D
GRM0335C1H4R5BD01D
GRM0335C1H4R5CD01D
GRM0335C1H4R6WD01D
GRM0335C1H4R6BD01D
GRM0335C1H4R6CD01D
GRM0335C1H4R7WD01D
GRM0335C1H4R7BD01D
GRM0335C1H4R7CD01D
GRM0335C1H4R8WD01D
GRM0335C1H4R8BD01D
GRM0335C1H4R8CD01D
GRM0335C1H4R9WD01D
GRM0335C1H4R9BD01D
GRM0335C1H4R9CD01D
GRM0335C1H5R0WD01D
GRM0335C1H5R0BD01D
GRM0335C1H5R0CD01D
GRM0335C1H5R1WD01D
GRM0335C1H5R1BD01D
GRM0335C1H5R1CD01D
GRM0335C1H5R1DD01D
0.6x0.3(03)<0201> 50(1H)
GRM1555C1H3R8WA01D
GRM1555C1H3R8BA01D
GRM1555C1H3R8CA01D
GRM1555C1H3R9WA01D
GRM1555C1H3R9BA01D
GRM1555C1H3R9CA01D
GRM1555C1H4R0WA01D
GRM1555C1H4R0BA01D
GRM1555C1H4R0CA01D
GRM1555C1H4R1WA01D
GRM1555C1H4R1BA01D
GRM1555C1H4R1CA01D
GRM1555C1H4R2WA01D
GRM1555C1H4R2BA01D
GRM1555C1H4R2CA01D
GRM1555C1H4R3WA01D
GRM1555C1H4R3BA01D
GRM1555C1H4R3CA01D
GRM1555C1H4R4WA01D
GRM1555C1H4R4BA01D
GRM1555C1H4R4CA01D
GRM1555C1H4R5WA01D
GRM1555C1H4R5BA01D
GRM1555C1H4R5CA01D
GRM1555C1H4R6WA01D
GRM1555C1H4R6BA01D
GRM1555C1H4R6CA01D
GRM1555C1H4R7WA01D
GRM1555C1H4R7BA01D
GRM1555C1H4R7CA01D
GRM1555C1H4R8WA01D
GRM1555C1H4R8BA01D
GRM1555C1H4R8CA01D
GRM1555C1H4R9WA01D
GRM1555C1H4R9BA01D
GRM1555C1H4R9CA01D
GRM1555C1H5R0WA01D
GRM1555C1H5R0BA01D
GRM1555C1H5R0CA01D
GRM1555C1H5R1WA01D
GRM1555C1H5R1BA01D
GRM1555C1H5R1CA01D
GRM1555C1H5R1DA01D
1.0x0.5(15)<0402>
3.8pF(3R8)
3.9pF(3R9)
4.0pF(4R0)
4.1pF(4R1)
4.2pF(4R2)
4.3pF(4R3)
4.4pF(4R4)
4.5pF(4R5)
4.6pF(4R6)
4.7pF(4R7)
4.8pF(4R8)
4.9pF(4R9)
5.0pF(5R0)
5.1pF(5R1)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
Temperature Compensating Type C0G(5C) Characteristics
GRM0225C1C3R6WD05L
GRM0225C1C3R6BD05L
GRM0225C1C3R6CD05L
GRM0225C1C3R7WD05L
GRM0225C1C3R7BD05L
GRM0225C1C3R7CD05L
GRM0335C1H3R6WD01D
GRM0335C1H3R6BD01D
GRM0335C1H3R6CD01D
GRM0335C1H3R7WD01D
GRM0335C1H3R7BD01D
GRM0335C1H3R7CD01D
GRM1555C1H3R6WA01D
GRM1555C1H3R6BA01D
GRM1555C1H3R6CA01D
GRM1555C1H3R7WA01D
GRM1555C1H3R7BA01D
GRM1555C1H3R7CA01D
3.6pF(3R6)
3.7pF(3R7)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
20
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
16(1C)
GRM0225C1C5R3WD05L
GRM0225C1C5R3BD05L
GRM0225C1C5R3CD05L
GRM0225C1C5R3DD05L
GRM0225C1C5R4WD05L
GRM0225C1C5R4BD05L
GRM0225C1C5R4CD05L
GRM0225C1C5R4DD05L
GRM0225C1C5R5WD05L
GRM0225C1C5R5BD05L
GRM0225C1C5R5CD05L
GRM0225C1C5R5DD05L
GRM0225C1C5R6WD05L
GRM0225C1C5R6BD05L
GRM0225C1C5R6CD05L
GRM0225C1C5R6DD05L
GRM0225C1C5R7WD05L
GRM0225C1C5R7BD05L
GRM0225C1C5R7CD05L
GRM0225C1C5R7DD05L
GRM0225C1C5R8WD05L
GRM0225C1C5R8BD05L
GRM0225C1C5R8CD05L
GRM0225C1C5R8DD05L
GRM0225C1C5R9WD05L
GRM0225C1C5R9BD05L
GRM0225C1C5R9CD05L
GRM0225C1C5R9DD05L
GRM0225C1C6R0WD05L
GRM0225C1C6R0BD05L
GRM0225C1C6R0CD05L
GRM0225C1C6R0DD05L
GRM0225C1C6R1WD05L
GRM0225C1C6R1BD05L
GRM0225C1C6R1CD05L
GRM0225C1C6R1DD05L
GRM0225C1C6R2WD05L
GRM0225C1C6R2BD05L
GRM0225C1C6R2CD05L
GRM0225C1C6R2DD05L
GRM0225C1C6R3WD05L
GRM0225C1C6R3BD05L
GRM0225C1C6R3CD05L
GRM0225C1C6R3DD05L
0.4x0.2(02)<01005> 50(1H)
GRM0335C1H5R3WD01D
GRM0335C1H5R3BD01D
GRM0335C1H5R3CD01D
GRM0335C1H5R3DD01D
GRM0335C1H5R4WD01D
GRM0335C1H5R4BD01D
GRM0335C1H5R4CD01D
GRM0335C1H5R4DD01D
GRM0335C1H5R5WD01D
GRM0335C1H5R5BD01D
GRM0335C1H5R5CD01D
GRM0335C1H5R5DD01D
GRM0335C1H5R6WD01D
GRM0335C1H5R6BD01D
GRM0335C1H5R6CD01D
GRM0335C1H5R6DD01D
GRM0335C1H5R7WD01D
GRM0335C1H5R7BD01D
GRM0335C1H5R7CD01D
GRM0335C1H5R7DD01D
GRM0335C1H5R8WD01D
GRM0335C1H5R8BD01D
GRM0335C1H5R8CD01D
GRM0335C1H5R8DD01D
GRM0335C1H5R9WD01D
GRM0335C1H5R9BD01D
GRM0335C1H5R9CD01D
GRM0335C1H5R9DD01D
GRM0335C1H6R0WD01D
GRM0335C1H6R0BD01D
GRM0335C1H6R0CD01D
GRM0335C1H6R0DD01D
GRM0335C1H6R1WD01D
GRM0335C1H6R1BD01D
GRM0335C1H6R1CD01D
GRM0335C1H6R1DD01D
GRM0335C1H6R2WD01D
GRM0335C1H6R2BD01D
GRM0335C1H6R2CD01D
GRM0335C1H6R2DD01D
GRM0335C1H6R3WD01D
GRM0335C1H6R3BD01D
GRM0335C1H6R3CD01D
GRM0335C1H6R3DD01D
0.6x0.3(03)<0201> 50(1H)
GRM1555C1H5R3WA01D
GRM1555C1H5R3BA01D
GRM1555C1H5R3CA01D
GRM1555C1H5R3DA01D
GRM1555C1H5R4WA01D
GRM1555C1H5R4BA01D
GRM1555C1H5R4CA01D
GRM1555C1H5R4DA01D
GRM1555C1H5R5WA01D
GRM1555C1H5R5BA01D
GRM1555C1H5R5CA01D
GRM1555C1H5R5DA01D
GRM1555C1H5R6WA01D
GRM1555C1H5R6BA01D
GRM1555C1H5R6CA01D
GRM1555C1H5R6DA01D
GRM1555C1H5R7WA01D
GRM1555C1H5R7BA01D
GRM1555C1H5R7CA01D
GRM1555C1H5R7DA01D
GRM1555C1H5R8WA01D
GRM1555C1H5R8BA01D
GRM1555C1H5R8CA01D
GRM1555C1H5R8DA01D
GRM1555C1H5R9WA01D
GRM1555C1H5R9BA01D
GRM1555C1H5R9CA01D
GRM1555C1H5R9DA01D
GRM1555C1H6R0WA01D
GRM1555C1H6R0BA01D
GRM1555C1H6R0CA01D
GRM1555C1H6R0DA01D
GRM1555C1H6R1WA01D
GRM1555C1H6R1BA01D
GRM1555C1H6R1CA01D
GRM1555C1H6R1DA01D
GRM1555C1H6R2WA01D
GRM1555C1H6R2BA01D
GRM1555C1H6R2CA01D
GRM1555C1H6R2DA01D
GRM1555C1H6R3WA01D
GRM1555C1H6R3BA01D
GRM1555C1H6R3CA01D
GRM1555C1H6R3DA01D
1.0x0.5(15)<0402>
5.3pF(5R3)
5.4pF(5R4)
5.5pF(5R5)
5.6pF(5R6)
5.7pF(5R7)
5.8pF(5R8)
5.9pF(5R9)
6.0pF(6R0)
6.1pF(6R1)
6.2pF(6R2)
6.3pF(6R3)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
Temperature Compensating Type C0G(5C) Characteristics
GRM0225C1C5R2WD05L
GRM0225C1C5R2BD05L
GRM0225C1C5R2CD05L
GRM0225C1C5R2DD05L
GRM0335C1H5R2WD01D
GRM0335C1H5R2BD01D
GRM0335C1H5R2CD01D
GRM0335C1H5R2DD01D
GRM1555C1H5R2WA01D
GRM1555C1H5R2BA01D
GRM1555C1H5R2CA01D
GRM1555C1H5R2DA01D
5.2pF(5R2)±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
GR M 02 2 5C 1C 5R2 W D05 L
Packaging Code in Part Number shows STD 180mm Reel Taping.
qProduct ID wSeries eDimensions (LxW) rDimension (T)
tTemperature Characteristics yRated Voltage uCapacitance
iCapacitance Tolerance oIndividual Specification Code !0Packaging*
(Part Number)
wq e r t y u i o !0
*GRM022: D is applicable.
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
21
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
16(1C)
GRM0225C1C6R6WD05L
GRM0225C1C6R6BD05L
GRM0225C1C6R6CD05L
GRM0225C1C6R6DD05L
GRM0225C1C6R7WD05L
GRM0225C1C6R7BD05L
GRM0225C1C6R7CD05L
GRM0225C1C6R7DD05L
GRM0225C1C6R8WD05L
GRM0225C1C6R8BD05L
GRM0225C1C6R8CD05L
GRM0225C1C6R8DD05L
GRM0225C1C6R9WD05L
GRM0225C1C6R9BD05L
GRM0225C1C6R9CD05L
GRM0225C1C6R9DD05L
GRM0225C1C7R0WD05L
GRM0225C1C7R0BD05L
GRM0225C1C7R0CD05L
GRM0225C1C7R0DD05L
GRM0225C1C7R1WD05L
GRM0225C1C7R1BD05L
GRM0225C1C7R1CD05L
GRM0225C1C7R1DD05L
GRM0225C1C7R2WD05L
GRM0225C1C7R2BD05L
GRM0225C1C7R2CD05L
GRM0225C1C7R2DD05L
GRM0225C1C7R3WD05L
GRM0225C1C7R3BD05L
GRM0225C1C7R3CD05L
GRM0225C1C7R3DD05L
GRM0225C1C7R4WD05L
GRM0225C1C7R4BD05L
GRM0225C1C7R4CD05L
GRM0225C1C7R4DD05L
GRM0225C1C7R5WD05L
GRM0225C1C7R5BD05L
GRM0225C1C7R5CD05L
GRM0225C1C7R5DD05L
0.4x0.2(02)<01005> 50(1H)
GRM0335C1H6R6WD01D
GRM0335C1H6R6BD01D
GRM0335C1H6R6CD01D
GRM0335C1H6R6DD01D
GRM0335C1H6R7WD01D
GRM0335C1H6R7BD01D
GRM0335C1H6R7CD01D
GRM0335C1H6R7DD01D
GRM0335C1H6R8WD01D
GRM0335C1H6R8BD01D
GRM0335C1H6R8CD01D
GRM0335C1H6R8DD01D
GRM0335C1H6R9WD01D
GRM0335C1H6R9BD01D
GRM0335C1H6R9CD01D
GRM0335C1H6R9DD01D
GRM0335C1H7R0WD01D
GRM0335C1H7R0BD01D
GRM0335C1H7R0CD01D
GRM0335C1H7R0DD01D
GRM0335C1H7R1WD01D
GRM0335C1H7R1BD01D
GRM0335C1H7R1CD01D
GRM0335C1H7R1DD01D
GRM0335C1H7R2WD01D
GRM0335C1H7R2BD01D
GRM0335C1H7R2CD01D
GRM0335C1H7R2DD01D
GRM0335C1H7R3WD01D
GRM0335C1H7R3BD01D
GRM0335C1H7R3CD01D
GRM0335C1H7R3DD01D
GRM0335C1H7R4WD01D
GRM0335C1H7R4BD01D
GRM0335C1H7R4CD01D
GRM0335C1H7R4DD01D
GRM0335C1H7R5WD01D
GRM0335C1H7R5BD01D
GRM0335C1H7R5CD01D
GRM0335C1H7R5DD01D
0.6x0.3(03)<0201> 50(1H)
GRM1555C1H6R6WA01D
GRM1555C1H6R6BA01D
GRM1555C1H6R6CA01D
GRM1555C1H6R6DA01D
GRM1555C1H6R7WA01D
GRM1555C1H6R7BA01D
GRM1555C1H6R7CA01D
GRM1555C1H6R7DA01D
GRM1555C1H6R8WA01D
GRM1555C1H6R8BA01D
GRM1555C1H6R8CA01D
GRM1555C1H6R8DA01D
GRM1555C1H6R9WA01D
GRM1555C1H6R9BA01D
GRM1555C1H6R9CA01D
GRM1555C1H6R9DA01D
GRM1555C1H7R0WA01D
GRM1555C1H7R0BA01D
GRM1555C1H7R0CA01D
GRM1555C1H7R0DA01D
GRM1555C1H7R1WA01D
GRM1555C1H7R1BA01D
GRM1555C1H7R1CA01D
GRM1555C1H7R1DA01D
GRM1555C1H7R2WA01D
GRM1555C1H7R2BA01D
GRM1555C1H7R2CA01D
GRM1555C1H7R2DA01D
GRM1555C1H7R3WA01D
GRM1555C1H7R3BA01D
GRM1555C1H7R3CA01D
GRM1555C1H7R3DA01D
GRM1555C1H7R4WA01D
GRM1555C1H7R4BA01D
GRM1555C1H7R4CA01D
GRM1555C1H7R4DA01D
GRM1555C1H7R5WA01D
GRM1555C1H7R5BA01D
GRM1555C1H7R5CA01D
GRM1555C1H7R5DA01D
1.0x0.5(15)<0402>
6.6pF(6R6)
6.7pF(6R7)
6.8pF(6R8)
6.9pF(6R9)
7.0pF(7R0)
7.1pF(7R1)
7.2pF(7R2)
7.3pF(7R3)
7.4pF(7R4)
7.5pF(7R5)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
Temperature Compensating Type C0G(5C) Characteristics
GRM0225C1C6R4WD05L
GRM0225C1C6R4BD05L
GRM0225C1C6R4CD05L
GRM0225C1C6R4DD05L
GRM0225C1C6R5WD05L
GRM0225C1C6R5BD05L
GRM0225C1C6R5CD05L
GRM0225C1C6R5DD05L
GRM0335C1H6R4WD01D
GRM0335C1H6R4BD01D
GRM0335C1H6R4CD01D
GRM0335C1H6R4DD01D
GRM0335C1H6R5WD01D
GRM0335C1H6R5BD01D
GRM0335C1H6R5CD01D
GRM0335C1H6R5DD01D
GRM1555C1H6R4WA01D
GRM1555C1H6R4BA01D
GRM1555C1H6R4CA01D
GRM1555C1H6R4DA01D
GRM1555C1H6R5WA01D
GRM1555C1H6R5BA01D
GRM1555C1H6R5CA01D
GRM1555C1H6R5DA01D
6.4pF(6R4)
6.5pF(6R5)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
22
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
16(1C)
GRM0225C1C7R8WD05L
GRM0225C1C7R8BD05L
GRM0225C1C7R8CD05L
GRM0225C1C7R8DD05L
GRM0225C1C7R9WD05L
GRM0225C1C7R9BD05L
GRM0225C1C7R9CD05L
GRM0225C1C7R9DD05L
GRM0225C1C8R0WD05L
GRM0225C1C8R0BD05L
GRM0225C1C8R0CD05L
GRM0225C1C8R0DD05L
GRM0225C1C8R1WD05L
GRM0225C1C8R1BD05L
GRM0225C1C8R1CD05L
GRM0225C1C8R1DD05L
GRM0225C1C8R2WD05L
GRM0225C1C8R2BD05L
GRM0225C1C8R2CD05L
GRM0225C1C8R2DD05L
GRM0225C1C8R3WD05L
GRM0225C1C8R3BD05L
GRM0225C1C8R3CD05L
GRM0225C1C8R3DD05L
GRM0225C1C8R4WD05L
GRM0225C1C8R4BD05L
GRM0225C1C8R4CD05L
GRM0225C1C8R4DD05L
GRM0225C1C8R5WD05L
GRM0225C1C8R5BD05L
GRM0225C1C8R5CD05L
GRM0225C1C8R5DD05L
GRM0225C1C8R6WD05L
GRM0225C1C8R6BD05L
GRM0225C1C8R6CD05L
GRM0225C1C8R6DD05L
GRM0225C1C8R7WD05L
GRM0225C1C8R7BD05L
GRM0225C1C8R7CD05L
GRM0225C1C8R7DD05L
0.4x0.2(02)<01005> 50(1H)
GRM0335C1H7R8WD01D
GRM0335C1H7R8BD01D
GRM0335C1H7R8CD01D
GRM0335C1H7R8DD01D
GRM0335C1H7R9WD01D
GRM0335C1H7R9BD01D
GRM0335C1H7R9CD01D
GRM0335C1H7R9DD01D
GRM0335C1H8R0WD01D
GRM0335C1H8R0BD01D
GRM0335C1H8R0CD01D
GRM0335C1H8R0DD01D
GRM0335C1H8R1WD01D
GRM0335C1H8R1BD01D
GRM0335C1H8R1CD01D
GRM0335C1H8R1DD01D
GRM0335C1H8R2WD01D
GRM0335C1H8R2BD01D
GRM0335C1H8R2CD01D
GRM0335C1H8R2DD01D
GRM0335C1H8R3WD01D
GRM0335C1H8R3BD01D
GRM0335C1H8R3CD01D
GRM0335C1H8R3DD01D
GRM0335C1H8R4WD01D
GRM0335C1H8R4BD01D
GRM0335C1H8R4CD01D
GRM0335C1H8R4DD01D
GRM0335C1H8R5WD01D
GRM0335C1H8R5BD01D
GRM0335C1H8R5CD01D
GRM0335C1H8R5DD01D
GRM0335C1H8R6WD01D
GRM0335C1H8R6BD01D
GRM0335C1H8R6CD01D
GRM0335C1H8R6DD01D
GRM0335C1H8R7WD01D
GRM0335C1H8R7BD01D
GRM0335C1H8R7CD01D
GRM0335C1H8R7DD01D
0.6x0.3(03)<0201> 50(1H)
GRM1555C1H7R8WA01D
GRM1555C1H7R8BA01D
GRM1555C1H7R8CA01D
GRM1555C1H7R8DA01D
GRM1555C1H7R9WA01D
GRM1555C1H7R9BA01D
GRM1555C1H7R9CA01D
GRM1555C1H7R9DA01D
GRM1555C1H8R0WA01D
GRM1555C1H8R0BA01D
GRM1555C1H8R0CA01D
GRM1555C1H8R0DA01D
GRM1555C1H8R1WA01D
GRM1555C1H8R1BA01D
GRM1555C1H8R1CA01D
GRM1555C1H8R1DA01D
GRM1555C1H8R2WA01D
GRM1555C1H8R2BA01D
GRM1555C1H8R2CA01D
GRM1555C1H8R2DA01D
GRM1555C1H8R3WA01D
GRM1555C1H8R3BA01D
GRM1555C1H8R3CA01D
GRM1555C1H8R3DA01D
GRM1555C1H8R4WA01D
GRM1555C1H8R4BA01D
GRM1555C1H8R4CA01D
GRM1555C1H8R4DA01D
GRM1555C1H8R5WA01D
GRM1555C1H8R5BA01D
GRM1555C1H8R5CA01D
GRM1555C1H8R5DA01D
GRM1555C1H8R6WA01D
GRM1555C1H8R6BA01D
GRM1555C1H8R6CA01D
GRM1555C1H8R6DA01D
GRM1555C1H8R7WA01D
GRM1555C1H8R7BA01D
GRM1555C1H8R7CA01D
GRM1555C1H8R7DA01D
1.0x0.5(15)<0402>
7.8pF(7R8)
7.9pF(7R9)
8.0pF(8R0)
8.1pF(8R1)
8.2pF(8R2)
8.3pF(8R3)
8.4pF(8R4)
8.5pF(8R5)
8.6pF(8R6)
8.7pF(8R7)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
Temperature Compensating Type C0G(5C) Characteristics
GRM0225C1C7R6WD05L
GRM0225C1C7R6BD05L
GRM0225C1C7R6CD05L
GRM0225C1C7R6DD05L
GRM0225C1C7R7WD05L
GRM0225C1C7R7BD05L
GRM0225C1C7R7CD05L
GRM0225C1C7R7DD05L
GRM0335C1H7R6WD01D
GRM0335C1H7R6BD01D
GRM0335C1H7R6CD01D
GRM0335C1H7R6DD01D
GRM0335C1H7R7WD01D
GRM0335C1H7R7BD01D
GRM0335C1H7R7CD01D
GRM0335C1H7R7DD01D
GRM1555C1H7R6WA01D
GRM1555C1H7R6BA01D
GRM1555C1H7R6CA01D
GRM1555C1H7R6DA01D
GRM1555C1H7R7WA01D
GRM1555C1H7R7BA01D
GRM1555C1H7R7CA01D
GRM1555C1H7R7DA01D
7.6pF(7R6)
7.7pF(7R7)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
GR M 02 2 5C 1C 7R6 W D05 L
Packaging Code in Part Number shows STD 180mm Reel Taping.
qProduct ID wSeries eDimensions (LxW) rDimension (T)
tTemperature Characteristics yRated Voltage uCapacitance
iCapacitance Tolerance oIndividual Specification Code !0Packaging*
(Part Number)
wq e r t y u i o !0
*GRM022: D is applicable.
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
23
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
16(1C)
GRM0225C1C9R1WD05L
GRM0225C1C9R1BD05L
GRM0225C1C9R1CD05L
GRM0225C1C9R1DD05L
GRM0225C1C9R2WD05L
GRM0225C1C9R2BD05L
GRM0225C1C9R2CD05L
GRM0225C1C9R2DD05L
GRM0225C1C9R3WD05L
GRM0225C1C9R3BD05L
GRM0225C1C9R3CD05L
GRM0225C1C9R3DD05L
GRM0225C1C9R4WD05L
GRM0225C1C9R4BD05L
GRM0225C1C9R4CD05L
GRM0225C1C9R4DD05L
GRM0225C1C9R5WD05L
GRM0225C1C9R5BD05L
GRM0225C1C9R5CD05L
GRM0225C1C9R5DD05L
GRM0225C1C9R6WD05L
GRM0225C1C9R6BD05L
GRM0225C1C9R6CD05L
GRM0225C1C9R6DD05L
GRM0225C1C9R7WD05L
GRM0225C1C9R7BD05L
GRM0225C1C9R7CD05L
GRM0225C1C9R7DD05L
GRM0225C1C9R8WD05L
GRM0225C1C9R8BD05L
GRM0225C1C9R8CD05L
GRM0225C1C9R8DD05L
GRM0225C1C9R9WD05L
GRM0225C1C9R9BD05L
GRM0225C1C9R9CD05L
GRM0225C1C9R9DD05L
50(1H)
GRM0335C1H9R1WD01D
GRM0335C1H9R1BD01D
GRM0335C1H9R1CD01D
GRM0335C1H9R1DD01D
GRM0335C1H9R2WD01D
GRM0335C1H9R2BD01D
GRM0335C1H9R2CD01D
GRM0335C1H9R2DD01D
GRM0335C1H9R3WD01D
GRM0335C1H9R3BD01D
GRM0335C1H9R3CD01D
GRM0335C1H9R3DD01D
GRM0335C1H9R4WD01D
GRM0335C1H9R4BD01D
GRM0335C1H9R4CD01D
GRM0335C1H9R4DD01D
GRM0335C1H9R5WD01D
GRM0335C1H9R5BD01D
GRM0335C1H9R5CD01D
GRM0335C1H9R5DD01D
GRM0335C1H9R6WD01D
GRM0335C1H9R6BD01D
GRM0335C1H9R6CD01D
GRM0335C1H9R6DD01D
GRM0335C1H9R7WD01D
GRM0335C1H9R7BD01D
GRM0335C1H9R7CD01D
GRM0335C1H9R7DD01D
GRM0335C1H9R8WD01D
GRM0335C1H9R8BD01D
GRM0335C1H9R8CD01D
GRM0335C1H9R8DD01D
GRM0335C1H9R9WD01D
GRM0335C1H9R9BD01D
GRM0335C1H9R9CD01D
GRM0335C1H9R9DD01D
50(1H)
GRM1555C1H9R1WA01D
GRM1555C1H9R1BA01D
GRM1555C1H9R1CA01D
GRM1555C1H9R1DA01D
GRM1555C1H9R2WA01D
GRM1555C1H9R2BA01D
GRM1555C1H9R2CA01D
GRM1555C1H9R2DA01D
GRM1555C1H9R3WA01D
GRM1555C1H9R3BA01D
GRM1555C1H9R3CA01D
GRM1555C1H9R3DA01D
GRM1555C1H9R4WA01D
GRM1555C1H9R4BA01D
GRM1555C1H9R4CA01D
GRM1555C1H9R4DA01D
GRM1555C1H9R5WA01D
GRM1555C1H9R5BA01D
GRM1555C1H9R5CA01D
GRM1555C1H9R5DA01D
GRM1555C1H9R6WA01D
GRM1555C1H9R6BA01D
GRM1555C1H9R6CA01D
GRM1555C1H9R6DA01D
GRM1555C1H9R7WA01D
GRM1555C1H9R7BA01D
GRM1555C1H9R7CA01D
GRM1555C1H9R7DA01D
GRM1555C1H9R8WA01D
GRM1555C1H9R8BA01D
GRM1555C1H9R8CA01D
GRM1555C1H9R8DA01D
GRM1555C1H9R9WA01D
GRM1555C1H9R9BA01D
GRM1555C1H9R9CA01D
GRM1555C1H9R9DA01D
0.6x0.3(03)<0201> 1.0x0.5(15)<0402>0.4x0.2(02)<01005>
9.1pF(9R1)
9.2pF(9R2)
9.3pF(9R3)
9.4pF(9R4)
9.5pF(9R5)
9.6pF(9R6)
9.7pF(9R7)
9.8pF(9R8)
9.9pF(9R9)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
Temperature Compensating Type C0G(5C) Characteristics
GRM0225C1C8R8WD05L
GRM0225C1C8R8BD05L
GRM0225C1C8R8CD05L
GRM0225C1C8R8DD05L
GRM0225C1C8R9WD05L
GRM0225C1C8R9BD05L
GRM0225C1C8R9CD05L
GRM0225C1C8R9DD05L
GRM0225C1C9R0WD05L
GRM0225C1C9R0BD05L
GRM0225C1C9R0CD05L
GRM0225C1C9R0DD05L
GRM0335C1H8R8WD01D
GRM0335C1H8R8BD01D
GRM0335C1H8R8CD01D
GRM0335C1H8R8DD01D
GRM0335C1H8R9WD01D
GRM0335C1H8R9BD01D
GRM0335C1H8R9CD01D
GRM0335C1H8R9DD01D
GRM0335C1H9R0WD01D
GRM0335C1H9R0BD01D
GRM0335C1H9R0CD01D
GRM0335C1H9R0DD01D
GRM1555C1H8R8WA01D
GRM1555C1H8R8BA01D
GRM1555C1H8R8CA01D
GRM1555C1H8R8DA01D
GRM1555C1H8R9WA01D
GRM1555C1H8R9BA01D
GRM1555C1H8R9CA01D
GRM1555C1H8R9DA01D
GRM1555C1H9R0WA01D
GRM1555C1H9R0BA01D
GRM1555C1H9R0CA01D
GRM1555C1H9R0DA01D
8.8pF(8R8)
8.9pF(8R9)
9.0pF(9R0)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
24
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
16(1C)
GRM0225C1C100GD05L
GRM0225C1C100JD05L
GRM0225C1C120GD05L
GRM0225C1C120JD05L
GRM0225C1C150GD05L
GRM0225C1C150JD05L
GRM0225C1C180GD05L
GRM0225C1C180JD05L
GRM0225C1C220GD05L
GRM0225C1C220JD05L
GRM0225C1C270GD05L
GRM0225C1C270JD05L
GRM0225C1C330GD05L
GRM0225C1C330JD05L
GRM0225C1C390GD05L
GRM0225C1C390JD05L
GRM0225C1C470GD05L
GRM0225C1C470JD05L
10(1A)
GRM0225C1A560GD05L
GRM0225C1A560JD05L
GRM0225C1A680GD05L
GRM0225C1A680JD05L
GRM0225C1A820GD05L
GRM0225C1A820JD05L
GRM0225C1A101GD05L
GRM0225C1A101JD05L
6.3(0J)
GRM0225C0J560GD05L
GRM0225C0J560JD05L
GRM0225C0J680GD05L
GRM0225C0J680JD05L
GRM0225C0J820GD05L
GRM0225C0J820JD05L
GRM0225C0J101GD05L
GRM0225C0J101JD05L
50(1H)
GRM0335C1H100GD01D
GRM0335C1H100JD01D
GRM0335C1H120GD01D
GRM0335C1H120JD01D
GRM0335C1H150GD01D
GRM0335C1H150JD01D
GRM0335C1H180GD01D
GRM0335C1H180JD01D
GRM0335C1H220GD01D
GRM0335C1H220JD01D
GRM0335C1H270GD01D
GRM0335C1H270JD01D
GRM0335C1H330GD01D
GRM0335C1H330JD01D
GRM0335C1H390GD01D
GRM0335C1H390JD01D
GRM0335C1H470GD01D
GRM0335C1H470JD01D
GRM0335C1H560GD01D
GRM0335C1H560JD01D
GRM0335C1H680GD01D
GRM0335C1H680JD01D
GRM0335C1H820GD01D
GRM0335C1H820JD01D
GRM0335C1H101GD01D
GRM0335C1H101JD01D
0.4x0.2(02)<01005> 0.6x0.3(03)<0201>
10pF(100)
12pF(120)
15pF(150)
18pF(180)
22pF(220)
27pF(270)
33pF(330)
39pF(390)
47pF(470)
56pF(560)
68pF(680)
82pF(820)
100pF(101)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
Temperature Compensating Type C0G(5C) Characteristics
GR M 02 2 5C 1C 100 G D05 L
Packaging Code in Part Number shows STD 180mm Reel Taping.
qProduct ID wSeries eDimensions (LxW) rDimension (T)
tTemperature Characteristics yRated Voltage uCapacitance
iCapacitance Tolerance oIndividual Specification Code !0Packaging*
(Part Number)
wq e r t y u i o !0
*GRM022: D is applicable.
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
25
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
LxW [mm]
Rated Volt. [Vdc]
TC
Capacitance Tolerance Part Number
50(1H)
GRM1555C1H100GA01D
GRM1555C1H100JA01D
GRM1555C1H120GA01D
GRM1555C1H120JA01D
GRM1555C1H150GA01D
GRM1555C1H150JA01D
GRM1555C1H180GA01D
GRM1555C1H180JA01D
GRM1555C1H220GA01D
GRM1555C1H220JA01D
GRM1555C1H270GA01D
GRM1555C1H270JA01D
GRM1555C1H330GA01D
GRM1555C1H330JA01D
GRM1555C1H390GA01D
GRM1555C1H390JA01D
GRM1555C1H470GA01D
GRM1555C1H470JA01D
GRM1555C1H560GA01D
GRM1555C1H560JA01D
GRM1555C1H680GA01D
GRM1555C1H680JA01D
GRM1555C1H820GA01D
GRM1555C1H820JA01D
GRM1555C1H101GA01D
GRM1555C1H101JA01D
GRM1555C1H121GA01D
GRM1555C1H121JA01D
GRM1555C1H151GA01D
GRM1555C1H151JA01D
GRM1555C1H181GA01D
GRM1555C1H181JA01D
GRM1555C1H221GA01D
GRM1555C1H221JA01D
GRM1555C1H271GA01D
GRM1555C1H271JA01D
GRM1555C1H331GA01D
GRM1555C1H331JA01D
GRM1555C1H391GA01D
GRM1555C1H391JA01D
GRM1555C1H471GA01D
GRM1555C1H471JA01D
GRM1555C1H561GA01D
GRM1555C1H561JA01D
GRM1555C1H681GA01D
GRM1555C1H681JA01D
GRM1555C1H821GA01D
GRM1555C1H821JA01D
GRM1555C1H102GA01D
GRM1555C1H102JA01D
C0G(5C)
1.0x0.5(15)<0402>
10pF(100)
12pF(120)
15pF(150)
18pF(180)
22pF(220)
27pF(270)
33pF(330)
39pF(390)
47pF(470)
56pF(560)
68pF(680)
82pF(820)
100pF(101)
120pF(121)
150pF(151)
180pF(181)
220pF(221)
270pF(271)
330pF(331)
390pF(391)
470pF(471)
560pF(561)
680pF(681)
820pF(821)
1000pF(102)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
Temperature Compensating Type C0G(5C) Characteristics
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
26
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
100(2A)
GRM1885C2A100JA01D
GRM1885C2A120JA01D
GRM1885C2A150JA01D
GRM1885C2A180JA01D
GRM1885C2A220JA01D
GRM1885C2A270JA01D
GRM1885C2A330JA01D
GRM1885C2A390JA01D
GRM1885C2A470JA01D
GRM1885C2A560JA01D
GRM1885C2A680JA01D
GRM1885C2A820JA01D
GRM1885C2A101JA01D
GRM1885C2A121JA01D
GRM1885C2A151JA01D
GRM1885C2A181JA01D
GRM1885C2A221JA01D
GRM1885C2A271JA01D
GRM1885C2A331JA01D
GRM1885C2A391JA01D
GRM1885C2A471JA01D
GRM1885C2A561JA01D
GRM1885C2A681JA01D
GRM1885C2A821JA01D
GRM1885C2A102JA01D
GRM1885C2A122JA01D
GRM1885C2A152JA01D
50(1H)
GRM1885C1H100JA01D
GRM1885C1H120JA01D
GRM1885C1H150JA01D
GRM1885C1H180JA01D
GRM1885C1H220JA01D
GRM1885C1H270JA01D
GRM1885C1H330JA01D
GRM1885C1H390JA01D
GRM1885C1H470JA01D
GRM1885C1H560JA01D
GRM1885C1H680JA01D
GRM1885C1H820JA01D
GRM1885C1H101JA01D
GRM1885C1H121JA01D
GRM1885C1H151JA01D
GRM1885C1H181JA01D
GRM1885C1H221JA01D
GRM1885C1H271JA01D
GRM1885C1H331JA01D
GRM1885C1H391JA01D
GRM1885C1H471JA01D
GRM1885C1H561JA01D
GRM1885C1H681JA01D
GRM1885C1H821JA01D
GRM1885C1H102JA01D
GRM1885C1H122JA01D
GRM1885C1H152JA01D
GRM1885C1H182JA01D
GRM1885C1H222JA01D
GRM1885C1H272JA01D
GRM1885C1H332JA01D
GRM1885C1H392JA01D
1.6x0.8(18)<0603>
10pF(100)
12pF(120)
15pF(150)
18pF(180)
22pF(220)
27pF(270)
33pF(330)
39pF(390)
47pF(470)
56pF(560)
68pF(680)
82pF(820)
100pF(101)
120pF(121)
150pF(151)
180pF(181)
220pF(221)
270pF(271)
330pF(331)
390pF(391)
470pF(471)
560pF(561)
680pF(681)
820pF(821)
1000pF(102)
1200pF(122)
1500pF(152)
1800pF(182)
2200pF(222)
2700pF(272)
3300pF(332)
3900pF(392)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
Temperature Compensating Type C0G(5C) Characteristics
GR M 18 8 5C 2A 100 J A01 D
Packaging Code in Part Number shows STD 180mm Reel Taping.
qProduct ID wSeries eDimensions (LxW) rDimension (T)
tTemperature Characteristics yRated Voltage uCapacitance
iCapacitance Tolerance oIndividual Specification Code !0Packaging
(Part Number)
wq e r t y u i o !0
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
27
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
100(2A)
GRM2165C2A101JA01D
GRM2165C2A121JA01D
GRM2165C2A151JA01D
GRM2165C2A181JA01D
GRM2165C2A221JA01D
GRM2165C2A271JA01D
GRM2165C2A331JA01D
GRM2165C2A391JA01D
GRM2165C2A471JA01D
GRM2165C2A561JA01D
GRM2165C2A681JA01D
GRM2165C2A821JA01D
GRM2165C2A102JA01D
GRM2165C2A122JA01D
GRM2165C2A152JA01D
GRM2165C2A182JA01D
GRM2165C2A222JA01D
GRM2165C2A272JA01D
GRM2165C2A332JA01D
50(1H)
GRM2165C1H122JA01D
GRM2165C1H152JA01D
GRM2165C1H182JA01D
GRM2165C1H222JA01D
GRM2165C1H272JA01D
GRM2165C1H332JA01D
GRM2165C1H392JA01D
GRM2165C1H472JA01D
GRM2195C1H562JA01D
GRM2195C1H682JA01D
GRM2195C1H822JA01D
GRM2195C1H103JA01D
GRM2195C1H123JA01D
GRM2195C1H153JA01D
GRM21B5C1H183JA01L
GRM21B5C1H223JA01L
100(2A)
GRM3195C2A182JA01D
GRM3195C2A222JA01D
GRM3195C2A272JA01D
GRM3195C2A332JA01D
GRM3195C2A392JA01D
GRM3195C2A472JA01D
GRM3195C2A562JA01D
GRM3195C2A682JA01D
GRM3195C2A822JA01D
GRM3195C2A103JA01D
GRM3195C2A123JA01D
GRM3195C2A153JA01D
GRM3195C2A183JA01D
GRM3195C2A223JA01D
50(1H)
GRM3195C1H472JA01D
GRM3195C1H562JA01D
GRM3195C1H682JA01D
GRM3195C1H822JA01D
GRM3195C1H103JA01D
GRM3195C1H123JA01D
GRM3195C1H153JA01D
GRM3195C1H183JA01D
GRM3195C1H223JA01D
GRM3195C1H273JA01D
GRM3195C1H333JA01D
GRM3195C1H393JA01D
GRM31M5C1H473JA01L
GRM31M5C1H563JA01L
GRM31C5C1H683JA01L
GRM31C5C1H823JA01L
GRM31C5C1H104JA01L
2.0x1.25(21)<0805> 3.2x1.6(31)<1206>
100pF(101)
120pF(121)
150pF(151)
180pF(181)
220pF(221)
270pF(271)
330pF(331)
390pF(391)
470pF(471)
560pF(561)
680pF(681)
820pF(821)
1000pF(102)
1200pF(122)
1500pF(152)
1800pF(182)
2200pF(222)
2700pF(272)
3300pF(332)
3900pF(392)
4700pF(472)
5600pF(562)
6800pF(682)
8200pF(822)
10000pF(103)
12000pF(123)
15000pF(153)
18000pF(183)
22000pF(223)
27000pF(273)
33000pF(333)
39000pF(393)
47000pF(473)
56000pF(563)
68000pF(683)
82000pF(823)
100000pF(104)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
Temperature Compensating Type C0G(5C) Characteristics
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
28
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
50(1H)
GRM1535C1HR10BDD5D
GRM1535C1HR20BDD5D
GRM1535C1HR30BDD5D
GRM1535C1HR40BDD5D
GRM1535C1HR50BDD5D
GRM1535C1HR60BDD5D
GRM1535C1HR70BDD5D
GRM1535C1HR80BDD5D
GRM1535C1HR90BDD5D
GRM1535C1H1R0CDD5D
GRM1535C1H1R1CDD5D
GRM1535C1H1R2CDD5D
GRM1535C1H1R3CDD5D
GRM1535C1H1R4CDD5D
GRM1535C1H1R5CDD5D
GRM1535C1H1R6CDD5D
GRM1535C1H1R7CDD5D
GRM1535C1H1R8CDD5D
GRM1535C1H1R9CDD5D
GRM1535C1H2R0CDD5D
GRM1535C1H2R1CDD5D
GRM1535C1H2R2CDD5D
GRM1535C1H2R3CDD5D
GRM1535C1H2R4CDD5D
GRM1535C1H2R5CDD5D
GRM1535C1H2R6CDD5D
GRM1535C1H2R7CDD5D
GRM1535C1H2R8CDD5D
GRM1535C1H2R9CDD5D
GRM1535C1H3R0CDD5D
GRM1535C1H3R1CDD5D
GRM1535C1H3R2CDD5D
GRM1535C1H3R3CDD5D
GRM1535C1H3R4CDD5D
GRM1535C1H3R5CDD5D
GRM1535C1H3R6CDD5D
GRM1535C1H3R7CDD5D
GRM1535C1H3R8CDD5D
GRM1535C1H3R9CDD5D
GRM1535C1H4R0CDD5D
GRM1535C1H4R1CDD5D
GRM1535C1H4R2CDD5D
GRM1535C1H4R3CDD5D
GRM1535C1H4R4CDD5D
GRM1535C1H4R5CDD5D
GRM1535C1H4R6CDD5D
GRM1535C1H4R7CDD5D
GRM1535C1H4R8CDD5D
1.0x0.5(15)<0402>
0.1pF(R10)
0.2pF(R20)
0.3pF(R30)
0.4pF(R40)
0.5pF(R50)
0.6pF(R60)
0.7pF(R70)
0.8pF(R80)
0.9pF(R90)
1.0pF(1R0)
1.1pF(1R1)
1.2pF(1R2)
1.3pF(1R3)
1.4pF(1R4)
1.5pF(1R5)
1.6pF(1R6)
1.7pF(1R7)
1.8pF(1R8)
1.9pF(1R9)
2.0pF(2R0)
2.1pF(2R1)
2.2pF(2R2)
2.3pF(2R3)
2.4pF(2R4)
2.5pF(2R5)
2.6pF(2R6)
2.7pF(2R7)
2.8pF(2R8)
2.9pF(2R9)
3.0pF(3R0)
3.1pF(3R1)
3.2pF(3R2)
3.3pF(3R3)
3.4pF(3R4)
3.5pF(3R5)
3.6pF(3R6)
3.7pF(3R7)
3.8pF(3R8)
3.9pF(3R9)
4.0pF(4R0)
4.1pF(4R1)
4.2pF(4R2)
4.3pF(4R3)
4.4pF(4R4)
4.5pF(4R5)
4.6pF(4R6)
4.7pF(4R7)
4.8pF(4R8)
±0.1pF(B)
±0.1pF(B)
±0.1pF(B)
±0.1pF(B)
±0.1pF(B)
±0.1pF(B)
±0.1pF(B)
±0.1pF(B)
±0.1pF(B)
±0.25pF(C)
±0.25pF(C)
±0.25pF(C)
±0.25pF(C)
±0.25pF(C)
±0.25pF(C)
±0.25pF(C)
±0.25pF(C)
±0.25pF(C)
±0.25pF(C)
±0.25pF(C)
±0.25pF(C)
±0.25pF(C)
±0.25pF(C)
±0.25pF(C)
±0.25pF(C)
±0.25pF(C)
±0.25pF(C)
±0.25pF(C)
±0.25pF(C)
±0.25pF(C)
±0.25pF(C)
±0.25pF(C)
±0.25pF(C)
±0.25pF(C)
±0.25pF(C)
±0.25pF(C)
±0.25pF(C)
±0.25pF(C)
±0.25pF(C)
±0.25pF(C)
±0.25pF(C)
±0.25pF(C)
±0.25pF(C)
±0.25pF(C)
±0.25pF(C)
±0.25pF(C)
±0.25pF(C)
±0.25pF(C)
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
50(1H)
GRM1535C1H5R1DDD5D
GRM1535C1H5R2DDD5D
GRM1535C1H5R3DDD5D
GRM1535C1H5R4DDD5D
GRM1535C1H5R5DDD5D
GRM1535C1H5R6DDD5D
GRM1535C1H5R7DDD5D
GRM1535C1H5R8DDD5D
GRM1535C1H5R9DDD5D
GRM1535C1H6R0DDD5D
GRM1535C1H6R1DDD5D
GRM1535C1H6R2DDD5D
GRM1535C1H6R3DDD5D
GRM1535C1H6R4DDD5D
GRM1535C1H6R5DDD5D
GRM1535C1H6R6DDD5D
GRM1535C1H6R7DDD5D
GRM1535C1H6R8DDD5D
GRM1535C1H6R9DDD5D
GRM1535C1H7R0DDD5D
GRM1535C1H7R1DDD5D
GRM1535C1H7R2DDD5D
GRM1535C1H7R3DDD5D
GRM1535C1H7R4DDD5D
GRM1535C1H7R5DDD5D
GRM1535C1H7R6DDD5D
GRM1535C1H7R7DDD5D
GRM1535C1H7R8DDD5D
GRM1535C1H7R9DDD5D
GRM1535C1H8R0DDD5D
GRM1535C1H8R1DDD5D
GRM1535C1H8R2DDD5D
GRM1535C1H8R3DDD5D
GRM1535C1H8R4DDD5D
GRM1535C1H8R5DDD5D
GRM1535C1H8R6DDD5D
GRM1535C1H8R7DDD5D
GRM1535C1H8R8DDD5D
GRM1535C1H8R9DDD5D
GRM1535C1H9R0DDD5D
GRM1535C1H9R1DDD5D
GRM1535C1H9R2DDD5D
GRM1535C1H9R3DDD5D
GRM1535C1H9R4DDD5D
GRM1535C1H9R5DDD5D
GRM1535C1H9R6DDD5D
1.0x0.5(15)<0402>
5.1pF(5R1)
5.2pF(5R2)
5.3pF(5R3)
5.4pF(5R4)
5.5pF(5R5)
5.6pF(5R6)
5.7pF(5R7)
5.8pF(5R8)
5.9pF(5R9)
6.0pF(6R0)
6.1pF(6R1)
6.2pF(6R2)
6.3pF(6R3)
6.4pF(6R4)
6.5pF(6R5)
6.6pF(6R6)
6.7pF(6R7)
6.8pF(6R8)
6.9pF(6R9)
7.0pF(7R0)
7.1pF(7R1)
7.2pF(7R2)
7.3pF(7R3)
7.4pF(7R4)
7.5pF(7R5)
7.6pF(7R6)
7.7pF(7R7)
7.8pF(7R8)
7.9pF(7R9)
8.0pF(8R0)
8.1pF(8R1)
8.2pF(8R2)
8.3pF(8R3)
8.4pF(8R4)
8.5pF(8R5)
8.6pF(8R6)
8.7pF(8R7)
8.8pF(8R8)
8.9pF(8R9)
9.0pF(9R0)
9.1pF(9R1)
9.2pF(9R2)
9.3pF(9R3)
9.4pF(9R4)
9.5pF(9R5)
9.6pF(9R6)
±0.5pF(D)
±0.5pF(D)
±0.5pF(D)
±0.5pF(D)
±0.5pF(D)
±0.5pF(D)
±0.5pF(D)
±0.5pF(D)
±0.5pF(D)
±0.5pF(D)
±0.5pF(D)
±0.5pF(D)
±0.5pF(D)
±0.5pF(D)
±0.5pF(D)
±0.5pF(D)
±0.5pF(D)
±0.5pF(D)
±0.5pF(D)
±0.5pF(D)
±0.5pF(D)
±0.5pF(D)
±0.5pF(D)
±0.5pF(D)
±0.5pF(D)
±0.5pF(D)
±0.5pF(D)
±0.5pF(D)
±0.5pF(D)
±0.5pF(D)
±0.5pF(D)
±0.5pF(D)
±0.5pF(D)
±0.5pF(D)
±0.5pF(D)
±0.5pF(D)
±0.5pF(D)
±0.5pF(D)
±0.5pF(D)
±0.5pF(D)
±0.5pF(D)
±0.5pF(D)
±0.5pF(D)
±0.5pF(D)
±0.5pF(D)
±0.5pF(D)
Temperature Compensating Type C0G(5C) Characteristics-Low Profile
GRM1535C1H4R9CDD5D
GRM1535C1H5R0CDD5D
4.9pF(4R9)
5.0pF(5R0)
±0.25pF(C)
±0.25pF(C)
GR M 15 3 5C 1H R10 B DD5 D
Packaging Code in Part Number shows STD 180mm Reel Taping.
qProduct ID wSeries eDimensions (LxW) rDimension (T)
tTemperature Characteristics yRated Voltage uCapacitance
iCapacitance Tolerance oIndividual Specification Code !0Packaging
(Part Number)
wq e r t y u i o !0
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
29
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
50(1H)
GRM1535C1H100JDD5D
GRM1535C1H120JDD5D
GRM1535C1H150JDD5D
GRM1535C1H180JDD5D
GRM1535C1H220JDD5D
GRM1535C1H270JDD5D
GRM1535C1H330JDD5D
GRM1535C1H390JDD5D
GRM1535C1H470JDD5D
GRM1535C1H560JDD5D
GRM1535C1H680JDD5D
GRM1535C1H820JDD5D
GRM1535C1H101JDD5D
GRM1535C1H121JDD5D
GRM1535C1H151JDD5D
GRM1535C1H181JDD5D
GRM1535C1H221JDD5D
GRM1535C1H271JDD5D
GRM1535C1H331JDD5D
GRM1535C1H391JDD5D
GRM1535C1H471JDD5D
GRM1535C1H561JDD5D
GRM1535C1H681JDD5D
1.0x0.5(15)<0402>
10pF(100)
12pF(120)
15pF(150)
18pF(180)
22pF(220)
27pF(270)
33pF(330)
39pF(390)
47pF(470)
56pF(560)
68pF(680)
82pF(820)
100pF(101)
120pF(121)
150pF(151)
180pF(181)
220pF(221)
270pF(271)
330pF(331)
390pF(391)
470pF(471)
560pF(561)
680pF(681)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
Temperature Compensating Type C0G(5C) Characteristics-Low Profile
GRM1535C1H9R7DDD5D
GRM1535C1H9R8DDD5D
GRM1535C1H9R9DDD5D
9.7pF(9R7)
9.8pF(9R8)
9.9pF(9R9)
±0.5pF(D)
±0.5pF(D)
±0.5pF(D)
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
30
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
100(2A)
GRM2165C2A101JA01D
GRM2165C2A121JA01D
GRM2165C2A151JA01D
GRM2165C2A181JA01D
GRM2165C2A221JA01D
GRM2165C2A271JA01D
GRM2165C2A331JA01D
GRM2165C2A391JA01D
GRM2165C2A471JA01D
GRM2165C2A561JA01D
GRM2165C2A681JA01D
GRM2165C2A821JA01D
GRM2165C2A102JA01D
GRM2165C2A122JA01D
GRM2165C2A152JA01D
GRM2165C2A182JA01D
GRM2165C2A222JA01D
GRM2165C2A272JA01D
GRM2165C2A332JA01D
50(1H)
GRM2165C1H122JA01D
GRM2165C1H152JA01D
GRM2165C1H182JA01D
GRM2165C1H222JA01D
GRM2165C1H272JA01D
GRM2165C1H332JA01D
GRM2165C1H392JA01D
GRM2165C1H472JA01D
GRM2195C1H562JA01D
GRM2195C1H682JA01D
GRM2195C1H822JA01D
GRM2195C1H103JA01D
GRM2195C1H123JA01D
GRM2195C1H153JA01D
100(2A)
GRM3195C2A182JA01D
GRM3195C2A222JA01D
GRM3195C2A272JA01D
GRM3195C2A332JA01D
GRM3195C2A392JA01D
GRM3195C2A472JA01D
GRM3195C2A562JA01D
GRM3195C2A682JA01D
GRM3195C2A822JA01D
GRM3195C2A103JA01D
50(1H)
GRM3195C1H472JA01D
GRM3195C1H562JA01D
GRM3195C1H682JA01D
GRM3195C1H822JA01D
GRM3195C1H103JA01D
GRM3195C1H123JA01D
GRM3195C1H153JA01D
GRM3195C1H183JA01D
GRM3195C1H223JA01D
GRM3195C1H273JA01D
GRM3195C1H333JA01D
GRM3195C1H393JA01D
GRM31M5C1H473JA01L
GRM31M5C1H563JA01L
2.0x1.25(21)<0805> 3.2x1.6(31)<1206>
100pF(101)
120pF(121)
150pF(151)
180pF(181)
220pF(221)
270pF(271)
330pF(331)
390pF(391)
470pF(471)
560pF(561)
680pF(681)
820pF(821)
1000pF(102)
1200pF(122)
1500pF(152)
1800pF(182)
2200pF(222)
2700pF(272)
3300pF(332)
3900pF(392)
4700pF(472)
5600pF(562)
6800pF(682)
8200pF(822)
10000pF(103)
12000pF(123)
15000pF(153)
18000pF(183)
22000pF(223)
27000pF(273)
33000pF(333)
39000pF(393)
47000pF(473)
56000pF(563)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
Temperature Compensating Type C0G(5C) Characteristics-Low Profile
GR M 21 6 5C 2A 101 J A01 D
Packaging Code in Part Number shows STD 180mm Reel Taping.
qProduct ID wSeries eDimensions (LxW) rDimension (T)
tTemperature Characteristics yRated Voltage uCapacitance
iCapacitance Tolerance oIndividual Specification Code !0Packaging
(Part Number)
wq e r t y u i o !0
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
31
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
50(1H)
GRM0337U1H1R0CD01D
GRM0337U1H2R0CD01D
GRM0337U1H3R0CD01D
GRM0337U1H4R0CD01D
GRM0337U1H5R0CD01D
GRM0337U1H6R0DD01D
GRM0337U1H7R0DD01D
GRM0337U1H8R0DD01D
GRM0337U1H9R0DD01D
GRM0337U1H100JD01D
GRM0337U1H120JD01D
GRM0337U1H150JD01D
25(1E)
GRM0337U1E180JD01D
GRM0337U1E220JD01D
GRM0337U1E270JD01D
GRM0337U1E330JD01D
GRM0337U1E390JD01D
GRM0337U1E470JD01D
GRM0337U1E560JD01D
GRM0337U1E680JD01D
GRM0337U1E820JD01D
GRM0337U1E101JD01D
50(1H)
GRM1557U1H1R0CZ01D
GRM1557U1H2R0CZ01D
GRM1557U1H3R0CZ01D
GRM1557U1H4R0CZ01D
GRM1557U1H5R0CZ01D
GRM1557U1H6R0DZ01D
GRM1557U1H7R0DZ01D
GRM1557U1H8R0DZ01D
GRM1557U1H9R0DZ01D
GRM1557U1H100JZ01D
GRM1557U1H120JZ01D
GRM1557U1H150JZ01D
GRM1557U1H180JZ01D
GRM1557U1H220JZ01D
GRM1557U1H270JZ01D
GRM1557U1H330JZ01D
GRM1557U1H390JZ01D
GRM1557U1H470JZ01D
GRM1557U1H560JZ01D
GRM1557U1H680JZ01D
GRM1557U1H820JZ01D
GRM1557U1H101JZ01D
GRM1557U1H121JZ01D
GRM1557U1H151JZ01D
GRM1557U1H181JZ01D
10(1A)
GRM1557U1A122JA01D
GRM1557U1A152JA01D
GRM1557U1A182JA01D
GRM1557U1A222JA01D
GRM1557U1A272JA01D
GRM1557U1A332JA01D
GRM1557U1A392JA01D
GRM1557U1A472JA01D
0.6x0.3(03)<0201> 1.0x0.5(15)<0402>
1.0pF(1R0)
2.0pF(2R0)
3.0pF(3R0)
4.0pF(4R0)
5.0pF(5R0)
6.0pF(6R0)
7.0pF(7R0)
8.0pF(8R0)
9.0pF(9R0)
10pF(100)
12pF(120)
15pF(150)
18pF(180)
22pF(220)
27pF(270)
33pF(330)
39pF(390)
47pF(470)
56pF(560)
68pF(680)
82pF(820)
100pF(101)
120pF(121)
150pF(151)
180pF(181)
1200pF(122)
1500pF(152)
1800pF(182)
2200pF(222)
2700pF(272)
3300pF(332)
3900pF(392)
4700pF(472)
±0.25pF(C)
±0.25pF(C)
±0.25pF(C)
±0.25pF(C)
±0.25pF(C)
±0.5pF(D)
±0.5pF(D)
±0.5pF(D)
±0.5pF(D)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
Temperature Compensating Type U2J(7U) Characteristics
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
32
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
50(1H)
GRM1887U1H102JA01D
GRM1887U1H122JA01D
GRM1887U1H152JA01D
GRM1887U1H182JA01D
GRM1887U1H222JA01D
GRM1887U1H272JA01D
GRM1887U1H332JA01D
GRM1887U1H392JA01D
GRM1887U1H472JA01D
GRM1887U1H562JA01D
GRM1887U1H682JA01D
GRM1887U1H822JA01D
GRM1887U1H103JA01D
10(1A)
GRM1887U1A123JA01D
GRM1887U1A153JA01D
GRM1887U1A183JA01D
GRM1887U1A223JA01D
1.6x0.8(18)<0603>
1000pF(102)
1200pF(122)
1500pF(152)
1800pF(182)
2200pF(222)
2700pF(272)
3300pF(332)
3900pF(392)
4700pF(472)
5600pF(562)
6800pF(682)
8200pF(822)
10000pF(103)
12000pF(123)
15000pF(153)
18000pF(183)
22000pF(223)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
50(1H)
GRM2167U1H103JA01D
GRM2167U1H123JA01D
GRM2167U1H153JA01D
GRM2167U1H183JA01D
GRM2197U1H223JA01D
GRM2197U1H273JA01D
GRM21A7U1H333JA39L
GRM21B7U1H393JA01L
GRM21B7U1H473JA01L
10(1A)
GRM2197U1A563JA01D
GRM21B7U1A683JA01L
GRM21B7U1A823JA01L
GRM21B7U1A104JA01L
50(1H)
GRM3197U1H563JA01D
GRM31M7U1H683JA01L
GRM31M7U1H823JA01L
GRM31M7U1H104JA01L
2.0x1.25(21)<0805> 3.2x1.6(31)<1206>
10000pF(103)
12000pF(123)
15000pF(153)
18000pF(183)
22000pF(223)
27000pF(273)
33000pF(333)
39000pF(393)
47000pF(473)
56000pF(563)
68000pF(683)
82000pF(823)
100000pF(104)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
Temperature Compensating Type U2J(7U) Characteristics
GR M 18 8 7U 1H 102 J A01 D
Packaging Code in Part Number shows STD 180mm Reel Taping.
qProduct ID wSeries eDimensions (LxW) rDimension (T)
tTemperature Characteristics yRated Voltage uCapacitance
iCapacitance Tolerance oIndividual Specification Code !0Packaging
(Part Number)
wq e r t y u i o !0
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
33
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
50(1H)
GRM1857U1H222JA44D
GRM1857U1H272JA44D
GRM1857U1H332JA44D
GRM1857U1H392JA44D
GRM1857U1H472JA44D
10(1A)
GRM1857U1A562JA44D
GRM1857U1A682JA44D
GRM1857U1A822JA44D
GRM1857U1A103JA44D
1.6x0.8(18)<0603>
2200pF(222)
2700pF(272)
3300pF(332)
3900pF(392)
4700pF(472)
5600pF(562)
6800pF(682)
8200pF(822)
10000pF(103)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
50(1H)
GRM2167U1H103JA01D
GRM2167U1H123JA01D
GRM2167U1H153JA01D
GRM2167U1H183JA01D
GRM2197U1H223JA01D
GRM2197U1H273JA01D
GRM21A7U1H333JA39L
10(1A)
GRM2197U1A563JA01D
50(1H)
GRM3197U1H563JA01D
GRM31M7U1H683JA01L
GRM31M7U1H823JA01L
GRM31M7U1H104JA01L
2.0x1.25(21)<0805> 3.2x1.6(31)<1206>
10000pF(103)
12000pF(123)
15000pF(153)
18000pF(183)
22000pF(223)
27000pF(273)
33000pF(333)
56000pF(563)
68000pF(683)
82000pF(823)
100000pF(104)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
Temperature Compensating Type U2J(7U) Characteristics-Low Profile
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
34
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
50(1H)
GRM1556P1H1R0CZ01D
GRM1556P1H2R0CZ01D
GRM1556P1H3R0CZ01D
GRM1556P1H4R0CZ01D
GRM1556P1H5R0CZ01D
GRM1556P1H6R0DZ01D
GRM1556P1H7R0DZ01D
GRM1556P1H8R0DZ01D
GRM1556P1H9R0DZ01D
GRM1556P1H100JZ01D
GRM1556P1H120JZ01D
GRM1556P1H150JZ01D
GRM1556P1H180JZ01D
GRM1556P1H220JZ01D
GRM1556P1H270JZ01D
1.0x0.5(15)<0402>
Temperature Compensating Type P2H(6P), R2H(6R) Characteristics
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
25(1E)
GRM0336R1E1R0CD01D
GRM0336R1E2R0CD01D
GRM0336R1E3R0CD01D
GRM0336R1E4R0CD01D
GRM0336R1E5R0CD01D
GRM0336R1E6R0DD01D
GRM0336R1E7R0DD01D
GRM0336R1E8R0DD01D
GRM0336R1E9R0DD01D
GRM0336R1E100JD01D
GRM0336R1E120JD01D
GRM0336R1E150JD01D
GRM0336R1E180JD01D
GRM0336R1E220JD01D
GRM0336R1E270JD01D
GRM0336R1E330JD01D
GRM0336R1E390JD01D
GRM0336R1E470JD01D
GRM0336R1E560JD01D
GRM0336R1E680JD01D
GRM0336R1E820JD01D
GRM0336R1E101JD01D
50(1H)
GRM1556R1H1R0CD01D
GRM1556R1H2R0CZ01D
GRM1556R1H3R0CZ01D
GRM1556R1H4R0CZ01D
GRM1556R1H5R0CZ01D
GRM1556R1H6R0DZ01D
GRM1556R1H7R0DZ01D
GRM1556R1H8R0DZ01D
GRM1556R1H9R0DZ01D
GRM1556R1H100JZ01D
GRM1556R1H120JZ01D
GRM1556R1H150JZ01D
GRM1556R1H180JZ01D
GRM1556R1H220JZ01D
GRM1556R1H270JZ01D
GRM1556R1H330JZ01D
1.0x0.5(15)<0402>0.6x0.3(03)<0201>
P2H
TC R2H
1.0pF(1R0)
2.0pF(2R0)
3.0pF(3R0)
4.0pF(4R0)
5.0pF(5R0)
6.0pF(6R0)
7.0pF(7R0)
8.0pF(8R0)
9.0pF(9R0)
10pF(100)
12pF(120)
15pF(150)
18pF(180)
22pF(220)
27pF(270)
33pF(330)
39pF(390)
47pF(470)
56pF(560)
68pF(680)
82pF(820)
100pF(101)
±0.25pF(C)
±0.25pF(C)
±0.25pF(C)
±0.25pF(C)
±0.25pF(C)
±0.5pF(D)
±0.5pF(D)
±0.5pF(D)
±0.5pF(D)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
GR M 15 5 6P 1H 1R0 C Z01 D
Packaging Code in Part Number shows STD 180mm Reel Taping.
qProduct ID wSeries eDimensions (LxW) rDimension (T)
tTemperature Characteristics yRated Voltage uCapacitance
iCapacitance Tolerance oIndividual Specification Code !0Packaging
(Part Number)
wq e r t y u i o !0
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
35
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance
25(1E)
GRM0336S1E1R0CD01D
GRM0336S1E2R0CD01D
GRM0336S1E3R0CD01D
GRM0336S1E4R0CD01D
GRM0336S1E5R0CD01D
GRM0336S1E6R0DD01D
GRM0336S1E7R0DD01D
GRM0336S1E8R0DD01D
GRM0336S1E9R0DD01D
GRM0336S1E100JD01D
GRM0336S1E120JD01D
GRM0336S1E150JD01D
GRM0336S1E180JD01D
GRM0336S1E220JD01D
GRM0336S1E270JD01D
GRM0336S1E330JD01D
GRM0336S1E390JD01D
GRM0336S1E470JD01D
GRM0336S1E560JD01D
GRM0336S1E680JD01D
GRM0336S1E820JD01D
GRM0336S1E101JD01D
50(1H)
GRM1556S1H1R0CD01D
GRM1556S1H2R0CZ01D
GRM1556S1H3R0CZ01D
GRM1556S1H4R0CZ01D
GRM1556S1H5R0CZ01D
GRM1556S1H6R0DZ01D
GRM1556S1H7R0DZ01D
GRM1556S1H8R0DZ01D
GRM1556S1H9R0DZ01D
GRM1556S1H100JZ01D
GRM1556S1H120JZ01D
GRM1556S1H150JZ01D
GRM1556S1H180JZ01D
GRM1556S1H220JZ01D
GRM1556S1H270JZ01D
GRM1556S1H330JZ01D
GRM1556S1H390JZ01D
1.0x0.5(15)<0402>0.6x0.3(03)<0201>
1.0pF(1R0)
2.0pF(2R0)
3.0pF(3R0)
4.0pF(4R0)
5.0pF(5R0)
6.0pF(6R0)
7.0pF(7R0)
8.0pF(8R0)
9.0pF(9R0)
10pF(100)
12pF(120)
15pF(150)
18pF(180)
22pF(220)
27pF(270)
33pF(330)
39pF(390)
47pF(470)
56pF(560)
68pF(680)
82pF(820)
100pF(101)
±0.25pF(C)
±0.25pF(C)
±0.25pF(C)
±0.25pF(C)
±0.25pF(C)
±0.5pF(D)
±0.5pF(D)
±0.5pF(D)
±0.5pF(D)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
±5%(J)
Temperature Compensating Type S2H(6S), T2H(6T) Characteristics
25(1E)
GRM0336T1E1R0CD01D
GRM0336T1E2R0CD01D
GRM0336T1E3R0CD01D
GRM0336T1E4R0CD01D
GRM0336T1E5R0CD01D
GRM0336T1E6R0DD01D
GRM0336T1E7R0DD01D
GRM0336T1E8R0DD01D
GRM0336T1E9R0DD01D
GRM0336T1E100JD01D
GRM0336T1E120JD01D
GRM0336T1E150JD01D
GRM0336T1E180JD01D
GRM0336T1E220JD01D
GRM0336T1E270JD01D
GRM0336T1E330JD01D
GRM0336T1E390JD01D
GRM0336T1E470JD01D
GRM0336T1E560JD01D
GRM0336T1E680JD01D
GRM0336T1E820JD01D
GRM0336T1E101JD01D
50(1H)
GRM1556T1H1R0CD01D
GRM1556T1H2R0CD01D
GRM1556T1H3R0CD01D
GRM1556T1H4R0CD01D
GRM1556T1H5R0CD01D
GRM1556T1H6R0DD01D
GRM1556T1H7R0DD01D
GRM1556T1H8R0DD01D
GRM1556T1H9R0DD01D
GRM1556T1H100JD01D
GRM1556T1H120JD01D
GRM1556T1H150JD01D
GRM1556T1H180JD01D
GRM1556T1H220JD01D
GRM1556T1H270JD01D
GRM1556T1H330JD01D
GRM1556T1H390JD01D
GRM1556T1H470JD01D
GRM1556T1H560JD01D
GRM1556T1H680JD01D
GRM1556T1H820JD01D
GRM1556T1H101JD01D
1.0x0.5(15)<0402>0.6x0.3(03)<0201>
TC S2H T2H
Part Number
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
36
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
10(1A)
GRM022R71A680KA01L
GRM022R71A101KA01L
GRM022R71A151KA01L
GRM022R71A221KA01L
GRM022R71A331KA01L
GRM022R71A471KA01L
0.4x0.2(02)<01005>
68pF(680)
100pF(101)
150pF(151)
220pF(221)
330pF(331)
470pF(471)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
25(1E)
GRM033R71E101KA01D
GRM033R71E151KA01D
GRM033R71E221KA01D
GRM033R71E331KA01D
GRM033R71E471KA01D
GRM033R71E681KA01D
GRM033R71E102KA01D
GRM033R71E152KA01D
16(1C)
GRM033R71C101KA01D
GRM033R71C151KA01D
GRM033R71C221KA01D
GRM033R71C331KA01D
GRM033R71C471KA01D
GRM033R71C681KA01D
GRM033R71C102KA01D
GRM033R71C152KA01D
GRM033R71C222KA88D
GRM033R71C332KA88D
10(1A)
GRM033R71A222KA01D
GRM033R71A332KA01D
GRM033R71A472KA01D
GRM033R71A682KA01D
GRM033R71A103KA01D
6.3(0J)
GRM033R70J472KA01D
GRM033R70J682KA01D
GRM033R70J103KA01D
0.6x0.3(03)<0201>
100pF(101)
150pF(151)
220pF(221)
330pF(331)
470pF(471)
680pF(681)
1000pF(102)
1500pF(152)
2200pF(222)
3300pF(332)
4700pF(472)
6800pF(682)
10000pF(103)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
High Dielectric Constant Type X7R(R7) Characteristics
GR M 02 2 R7 1A 680 K A01 L
Packaging Code in Part Number shows STD 180mm Reel Taping.
qProduct ID wSeries eDimensions (LxW) rDimension (T)
tTemperature Characteristics yRated Voltage uCapacitance
iCapacitance Tolerance oIndividual Specification Code !0Packaging
(Part Number)
wq e r t y u i o !0
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
37
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
100(2A)
GRM155R72A221KA01D
GRM155R72A331KA01D
GRM155R72A471KA01D
GRM155R72A681KA01D
GRM155R72A102KA01D
GRM155R72A152KA01D
GRM155R72A222KA01D
GRM155R72A332KA01D
GRM155R72A472KA01D
50(1H)
GRM155R71H221KA01D
GRM155R71H331KA01D
GRM155R71H471KA01D
GRM155R71H681KA01D
GRM155R71H102KA01D
GRM155R71H152KA01D
GRM155R71H222KA01D
GRM155R71H332KA01D
GRM155R71H472KA01D
GRM155R71H682KA88D
GRM155R71H103KA88D
GRM155R71H153KA12D
GRM155R71H223KA12D
25(1E)
GRM155R71E472KA01D
GRM155R71E682KA01D
GRM155R71E103KA01D
GRM155R71E153KA61D
GRM155R71E223KA61D
GRM155R71E333KA88D
GRM155R71E473KA88D
16(1C)
GRM155R71C153KA01D
GRM155R71C223KA01D
GRM155R71C333KA01D
GRM155R71C473KA01D
GRM155R71C683KA88D
GRM155R71C104KA88D
GRM155R71C154KA12D
GRM155R71C224KA12D
1.0x0.5(15)<0402>
220pF(221)
330pF(331)
470pF(471)
680pF(681)
1000pF(102)
1500pF(152)
2200pF(222)
3300pF(332)
4700pF(472)
6800pF(682)
10000pF(103)
15000pF(153)
22000pF(223)
33000pF(333)
47000pF(473)
68000pF(683)
0.10µF(104)
0.15µF(154)
0.22µF(224)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
10(1A)
GRM155R71A683KA01D
GRM155R71A104KA01D
1.0x0.5(15)<0402>
68000pF(683)
0.10µF(104)
±10%(K)
±10%(K)
High Dielectric Constant Type X7R(R7) Characteristics
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
38
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
* Please refer to GRM Series Specifications and Test Method (2).
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
100(2A)
GRM188R72A221KA01D
GRM188R72A331KA01D
GRM188R72A471KA01D
GRM188R72A681KA01D
GRM188R72A102KA01D
GRM188R72A152KA01D
GRM188R72A222KA01D
GRM188R72A332KA01D
GRM188R72A472KA01D
GRM188R72A682KA01D
GRM188R72A103KA01D
GRM188R72A104KA35D
50(1H)
GRM188R71H221KA01D
GRM188R71H331KA01D
GRM188R71H471KA01D
GRM188R71H681KA01D
GRM188R71H102KA01D
GRM188R71H152KA01D
GRM188R71H222KA01D
GRM188R71H332KA01D
GRM188R71H472KA01D
GRM188R71H682KA01D
GRM188R71H103KA01D
GRM188R71H153KA01D
GRM188R71H223KA01D
GRM188R71H333KA61D
GRM188R71H473KA61D
GRM188R71H683KA93D
GRM188R71H104KA93D
25(1E)
GRM188R71E222KA01D
GRM188R71E332KA01D
GRM188R71E472KA01D
GRM188R71E682KA01D
GRM188R71E103KA01D
GRM188R71E153KA01D
GRM188R71E223KA01D
GRM188R71E333KA01D
GRM188R71E473KA01D
GRM188R71E683KA01D
GRM188R71E104KA01D
GRM188R71E154KA01D
GRM188R71E224KA88D
GRM188R71E474KA12D*
GRM188R71E105KA12D*
16(1C)
GRM188R71C154KA01D
GRM188R71C224KA01D
GRM188R71C334KA01D
GRM188R71C474KA88D
GRM188C71C684KA12D*
GRM188R71C105KA12D*
1.6x0.8(18)<0603>
220pF(221)
330pF(331)
470pF(471)
680pF(681)
1000pF(102)
1500pF(152)
2200pF(222)
3300pF(332)
4700pF(472)
6800pF(682)
10000pF(103)
15000pF(153)
22000pF(223)
33000pF(333)
47000pF(473)
68000pF(683)
0.10µF(104)
0.15µF(154)
0.22µF(224)
0.33µF(334)
0.47µF(474)
0.68µF(684)
1.0µF(105)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
10(1A)
GRM188R71A334KA61D
GRM188R71A474KA61D
GRM188R71A684KA61D
GRM188R71A105KA61D*
GRM188R71A225KE15D*
6.3(0J)
GRM188C70J225KE20D*
4(0G)
GRM188C70G225KE20D*
1.6x0.8(18)<0603>
0.33µF(334)
0.47µF(474)
0.68µF(684)
1.0µF(105)
2.2µF(225)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
High Dielectric Constant Type X7R(R7)/X7S(C7) Characteristics
GR M 18 8 R7 2A 221 K A01 D
Packaging Code in Part Number shows STD 180mm Reel Taping.
qProduct ID wSeries eDimensions (LxW) rDimension (T)
tTemperature Characteristics yRated Voltage uCapacitance
iCapacitance Tolerance oIndividual Specification Code !0Packaging
(Part Number)
wq e r t y u i o !0
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
39
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
* Please refer to GRM Series Specifications and Test Method (2).
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
100(2A)
GRM219R72A682KA01D
GRM21BR72A103KA01L
GRM21BR72A153KA01L
GRM21BR72A223KA01L
GRM21BR72A333KA01L
GRM21BR72A473KA01L
GRM21AR72A224KAC5L
GRM21AR72A334KAC5L
GRM21BR72A474KA73L
50(1H)
GRM219R71H333KA01D
GRM21BR71H473KA01L
GRM21BR71H683KA01L
GRM21BR71H104KA01L
GRM21BR71H154KA01L
GRM21BR71H224KA01L
GRM219R71H334KA88D
GRM21BR71H474KA88L
GRM21BR71H105KA12L
25(1E)
GRM219R71E683KA01D
GRM21BR71E104KA01L
GRM21BR71E154KA01L
GRM21BR71E224KA01L
GRM21BR71E334KA01L
GRM219R71E474KA88D
GRM219R71E684KA88D
GRM21BR71E105KA99L
GRM219R71E105KA88D
GRM21BR71E225KA73L*
16(1C)
GRM219R71C684KA01D
GRM21BR71C105KA01L
GRM21BR71C225KA12L
GRM21BR71C475KA73L*
2.0x1.25(21)<0805>
6800pF(682)
10000pF(103)
15000pF(153)
22000pF(223)
33000pF(333)
47000pF(473)
68000pF(683)
0.10µF(104)
0.15µF(154)
0.22µF(224)
0.33µF(334)
0.47µF(474)
0.68µF(684)
1.0µF(105)
2.2µF(225)
4.7µF(475)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
10(1A)
GRM21BR71A225KA01L
GRM21BR71A475KA73L*
GRM21BR71A106KE51L*
6.3(0J)
GRM21BR70J106KE76L*
4(0G)
GRM21BE70G226ME51L*
2.0x1.25(21)<0805>
2.2µF(225)
4.7µF(475)
10µF(106)
22µF(226)
±10%(K)
±10%(K)
±10%(K)
±20%(M)
High Dielectric Constant Type X7R(R7)/X7U(E7) Characteristics
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
40
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
* Please refer to GRM Series Specifications and Test Method (2).
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
100(2A)
GRM319R72A153KA01L
GRM31MR72A223KA01L
GRM31MR72A333KA01L
GRM31MR72A473KA01L
GRM31MR72A683KA01L
GRM319R72A104KA01D
GRM31MR72A154KA01L
GRM31MR72A224KA01L
GRM31MR72A474KA35L
GRM31MR72A684KA35L
GRM31CR72A105KA01L
50(1H)
GRM31MR71H154KA01L
GRM31MR71H224KA01L
GRM319R71H334KA01D
GRM31MR71H474KA01L
GRM31MR71H684KA88L
GRM31MR71H105KA88L
GRM31CR71H225KA88L
GRM31CR71H475KA12L
25(1E)
GRM319R71E334KA01D
GRM319R71E474KA01D
GRM319R71E684KA01D
GRM31MR71E225KA93L
GRM31CR71E475KA88L
GRM31CR71E106KA12L*
16(1C)
GRM31MR71C225KA35L
GRM31CR71C475KA01L
GRM31CR71C106KAC7L*
3.2x1.6(31)<1206>
15000pF(153)
22000pF(223)
33000pF(333)
47000pF(473)
68000pF(683)
0.10µF(104)
0.15µF(154)
0.22µF(224)
0.33µF(334)
0.47µF(474)
0.68µF(684)
1.0µF(105)
2.2µF(225)
4.7µF(475)
10µF(106)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
10(1A)
GRM31CR71A106KA01L
GRM31CR71A226ME15L*
6.3(0J)
GRM31CR70J226ME19L*
4(0G)
GRM31CE70G476ME15L*
3.2x1.6(31)<1206>
10µF(106)
22µF(226)
47µF(476)
±10%(K)
±20%(M)
±20%(M)
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
100(2A)
GRM32CR72A684KA01L
GRM32CR72A105KA35L
GRM32ER72A225KA35L
50(1H)
GRM32ER71H475KA88L
35(YA)
GRM32ER7YA106KA12L
25(1E)
GRM32DR71E106KA12L
GRM32ER71E226ME15L*
3.2x2.5(32)<1210>
0.68µF(684)
1.0µF(105)
2.2µF(225)
4.7µF(475)
10µF(106)
22µF(226)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±20%(M)
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
16(1C)
GRM32ER71C226MEA8L*
10(1A)
GRM32ER71A226ME20L*
GRM32ER71A476ME15L*
6.3(0J)
GRM32ER70J476ME20L*
4(0G)
GRM32EE70G107ME19L*
3.2x2.5(32)<1210>
22µF(226)
47µF(476)
100µF(107)
±20%(M)
±20%(M)
±20%(M)
High Dielectric Constant Type X7R(R7)/X7U(E7) Characteristics
GR M 31 9 R7 2A 153 K A01 L
Packaging Code in Part Number shows STD 180mm Reel Taping.
qProduct ID wSeries eDimensions (LxW) rDimension (T)
tTemperature Characteristics yRated Voltage uCapacitance
iCapacitance Tolerance oIndividual Specification Code !0Packaging
(Part Number)
wq e r t y u i o !0
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
41
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
50(1H)
GRM15XR71H221KA86D
GRM15XR71H331KA86D
GRM15XR71H471KA86D
GRM15XR71H681KA86D
GRM15XR71H102KA86D
GRM15XR71H152KA86D
25(1E)
GRM15XR71E222KA86D
16(1C)
GRM15XR71C332KA86D
GRM15XR71C472KA86D
GRM15XR71C682KA86D
GRM15XR71C103KA86D
1.0x0.5(15)<0402>
220pF(221)
330pF(331)
470pF(471)
680pF(681)
1000pF(102)
1500pF(152)
2200pF(222)
3300pF(332)
4700pF(472)
6800pF(682)
10000pF(103)
1.0µF(105)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
10(1A)
GRM185D71A105KE36D*
1.6x0.8(18)<0603>
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
100(2A)
GRM219R72A682KA01D
GRM21AR72A224KAC5L
GRM21AR72A334KAC5L
50(1H)
GRM219R71H333KA01D
GRM219R71H334KA88D
25(1E)
GRM219R71E683KA01D
GRM219R71E474KA88D
GRM219R71E684KA88D
GRM219R71E105KA88D
16(1C)
GRM219R71C684KA01D
2.0x1.25(21)<0805>
6800pF(682)
33000pF(333)
68000pF(683)
0.22µF(224)
0.33µF(334)
0.47µF(474)
0.68µF(684)
1.0µF(105)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
High Dielectric Constant Type X7R(R7)/X7T(D7) Characteristics-Low Profile
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
100(2A)
GRM319R72A153KA01L
GRM31MR72A223KA01L
GRM31MR72A333KA01L
GRM31MR72A473KA01L
GRM31MR72A683KA01L
GRM319R72A104KA01D
GRM31MR72A154KA01L
GRM31MR72A224KA01L
GRM31MR72A474KA35L
GRM31MR72A684KA35L
50(1H) 25(1E) 16(1C)
3.2x1.6(31)<1206>
15000pF(153)
22000pF(223)
33000pF(333)
47000pF(473)
68000pF(683)
0.10µF(104)
0.15µF(154)
0.22µF(224)
0.33µF(334)
0.47µF(474)
0.68µF(684)
1.0µF(105)
2.2µF(225)
4.7µF(475)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
GRM31MR71H154KA01L
GRM31MR71H224KA01L
GRM319R71H334KA01D
GRM31MR71H474KA01L
GRM31MR71H684KA88L
GRM31MR71H105KA88L
GRM31MR71E225KA93L GRM31MR71C225KA35L
GRM319D71C475KA12D*#
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
* Please refer to GRM Series Specifications and Test Method (2).
# These Part Numbers have individual testing conditions on Durability of GRM Series Specifications and Test Methods (2). Please refer to P60.
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
100(2A)
GRM32CR72A684KA01L
GRM32CR72A105KA35L
GRM32NR71H684KA01L
50(1H)
3.2x2.5(32)<1210>
0.68µF(684)
1.0µF(105)
±10%(K)
±10%(K)
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
42
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
* Please refer to GRM Series Specifications and Test Method (2).
# These Part Numbers have individual testing conditions on Durability of GRM Series Specifications and Test Methods (2). Please refer to P60.
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
6.3(0J)
GRM033C80J153KE01D*
GRM033C80J223KE01D*
GRM033C80J333KE01D*
GRM033C80J473KE19D*
GRM033C80G153KE01D*
GRM033C80G223KE01D*
GRM033C80G333KE01D*
GRM033C80G473KE01D*
4(0G)
0.6x0.3(03)<0201>
15000pF(153)
22000pF(223)
33000pF(333)
47000pF(473)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
25(1E)
GRM155C81E683KA12D
GRM155C81E104KA12D
GRM155C80J154KE01D*
GRM155C80J224KE01D*
GRM155C80J334KE01D*
GRM155C80J474KE19D*
GRM155C80J684KE15D*#
GRM155C80G154KE01D*
GRM155C80G224KE01D*
GRM155C80G334KE01D*
GRM155C80G474KE01D*
GRM155C80G684KE19D*
6.3(0J)4(0G)
1.0x0.5(15)<0402>
68000pF(683)
0.10µF(104)
0.15µF(154)
0.22µF(224)
0.33µF(334)
0.47µF(474)
0.68µF(684)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
10(1A)
GRM188C81A225KE34D*
25(1E)
GRM188C81E105KAADD
GRM188C80J225KE19D*
GRM188C80G475KE19D*
GRM188C80G106ME47D*#
6.3(0J)4(0G)
GRM188C80E106ME47D*
2.5(0E)
1.6x0.8(18)<0603>
1.0µF(105)
2.2µF(225)
4.7µF(475)
10µF(106)
±10%(K)
±10%(K)
±10%(K)
±20%(M)
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
1.6x0.8(18)<0603>
10µF(106)±20%(M)
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
25(1E)
GRM21BC81E475KA12L*
16(1C) 10(1A) 6.3(0J)
2.0x1.25(21)<0805>
1.0µF(105)
2.2µF(225)
4.7µF(475)
10µF(106)
22µF(226)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±20%(M)
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
4(0G)
GRM21BC80G226ME39L*
2.0x1.25(21)<0805>
22µF(226)±20%(M)
GRM216C81C105KA12D*
GRM219C81C225KA12D*
GRM21BC81C475KA88L* GRM219C81A475KE34D*
GRM21BC81A106KE18L*
GRM219C80J475KE19D*
GRM21BC80J106KE19L*
GRM219C80J106KE39D*
GRM21BC80J226ME51L*#
High Dielectric Constant Type X6S(C8) Characteristics
GR M 03 3 C8 0J 153 K E01 D
Packaging Code in Part Number shows STD 180mm Reel Taping.
qProduct ID wSeries eDimensions (LxW) rDimension (T)
tTemperature Characteristics yRated Voltage uCapacitance
iCapacitance Tolerance oIndividual Specification Code !0Packaging
(Part Number)
wq e r t y u i o !0
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
43
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
25(1E)
GRM31CC81E106KE15L*
16(1C) 10(1A) 6.3(0J)
3.2x1.6(31)<1206>
2.2µF(225)
4.7µF(475)
10µF(106)
22µF(226)
47µF(476)
±10%(K)
±10%(K)
±10%(K)
±20%(M)
±20%(M)
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
25(1E)
GRM32DC81E106KA12L
GRM32EC81E226ME15L*
10(1A) 6.3(0J)
3.2x2.5(32)<1210>
10µF(106)
22µF(226)
47µF(476)
100µF(107)
±10%(K)
±20%(M)
±20%(M)
±20%(M)
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
4(0G)
GRM31CC80G476ME19L*
GRM31CD80G107ME39L*
GRM316C81C225KA12D*
GRM319C81C475KA12D*
GRM31MC81C106KA12L
GRM32NC81A226ME19L*
GRM32EC81A476ME19L*
GRM319C81A106KA12D
GRM31CC81A226ME19L*
GRM32EC80J476ME64L*
GRM32EC80J107ME20L*
4(0G)
GRM32EC80G107ME20L*
GRM319C80J106KE19D*
GRM31CC80J226ME19L*
GRM31CC80J476ME18L*
3.2x1.6(31)<1206>
47µF(476)
100µF(107)
±20%(M)
±20%(M)
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
*: Please refer to GRM Series Specifications and Test Method(2).
High Dielectric Constant Type X6S(C8)/X6T(D8) Characteristics
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
10(1A)
GRM185C81A105KE36D*
6.3(0J)
1.6x0.8(18)<0603>
1.0µF(105)±10%(K)
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
16(1C)
GRM316C81C225KA12D*
GRM319C81C475KA12D*
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
16(1C)
GRM216C81C105KA12D*
GRM219C81C225KA12D*
GRM185C80J105KE26D*
GRM219C81A475KE34D* GRM219C80J475KE19D*
GRM219C80J106KE39D*
10(1A) 6.3(0J)
2.0x1.25(21)<0805>
1.0µF(105)
2.2µF(225)
4.7µF(475)
10µF(106)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
3.2x1.6(31)<1206>
2.2µF(225)
4.7µF(475)
±10%(K)
±10%(K)
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
25(1E)
GRM32DC81E106KA12L
3.2x2.5(32)<1210>
10µF(106)±10%(K)
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
* Please refer to GRM Series Specifications and Test Method (2).
High Dielectric Constant Type X6S(C8) Characteristics-Low Profile
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
44
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
10(1A)
GRM022R61A680KA01L
GRM022R61A101KA01L
GRM022R61A151KA01L
GRM022R61A221KA01L
GRM022R61A331KA01L
GRM022R61A471KA01L
GRM022R61A681KE19L*
GRM022R61A102KE19L*
GRM022R61A152KE19L*
GRM022R61A222KE19L*
GRM022R61A332KE19L*
GRM022R61A472KE19L*
GRM022R61A682KE19L*
GRM022R61A103KE19L*
6.3(0J)
0.4x0.2(02)<01005>
68pF(680)
100pF(101)
150pF(151)
220pF(221)
330pF(331)
470pF(471)
680pF(681)
1000pF(102)
1500pF(152)
2200pF(222)
3300pF(332)
4700pF(472)
6800pF(682)
10000pF(103)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
25(1E)
GRM033R61A152KA01D
GRM033R61A222KA01D
GRM033R61A332KA01D
GRM033R61A472KA01D
GRM033R61A682KA01D
GRM033R61A103KA01D GRM033R60J103KA01D
GRM033R60J153KE01D*
GRM033R60J223KE01D*
GRM033R60J333KE01D*
GRM033R60J473KE19D*
GRM022R60J681KE19L*
GRM022R60J102KE19L*
GRM022R60J152KE19L*
GRM022R60J222KE19L*
GRM022R60J332KE19L*
GRM022R60J472KE19L*
GRM022R60J682KE19L*
GRM022R60J103KE19L*
16(1C) 10(1A) 6.3(0J)
0.6x0.3(03)<0201>
100pF(101)
150pF(151)
220pF(221)
330pF(331)
470pF(471)
680pF(681)
1000pF(102)
1500pF(152)
2200pF(222)
3300pF(332)
4700pF(472)
6800pF(682)
10000pF(103)
15000pF(153)
22000pF(223)
33000pF(333)
47000pF(473)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
: Please refer to X7R(R7) etc. Characteristics.
* Please refer to GRM Series Specifications and Test Method (2).
High Dielectric Constant Type X5R(R6) Characteristics
GR M 02 2 R6 1A 680 K A01 L
Packaging Code in Part Number shows STD 180mm Reel Taping.
qProduct ID wSeries eDimensions (LxW) rDimension (T)
tTemperature Characteristics yRated Voltage uCapacitance
iCapacitance Tolerance oIndividual Specification Code !0Packaging*
(Part Number)
wq e r t y u i o !0
*GRM022: D is applicable.
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
45
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
100(2A)
GRM155R61E683KA87D
GRM155R61E104KA87D
GRM155R61C223KA01D
GRM155R61C333KA01D
GRM155R61C473KA01D
GRM155R61C683KA88D
GRM155R61C104KA88D
50(1H) 25(1E) 16(1C)
1.0x0.5(15)<0402>
220pF(221)
330pF(331)
470pF(471)
680pF(681)
1000pF(102)
1500pF(152)
2200pF(222)
3300pF(332)
4700pF(472)
6800pF(682)
10000pF(103)
15000pF(153)
22000pF(223)
33000pF(333)
47000pF(473)
68000pF(683)
0.10µF(104)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
10(1A)
GRM155R61H102KA01D
GRM155R61H222KA01D
GRM155R61H472KA01D
GRM155R60J154KE01D*
GRM155R60J224KE01D*
GRM155R60J334KE01D*
GRM155R60J474KE19D*
GRM155R60J684KE19D*
GRM155R61A333KA01D
GRM155R61A473KA01D
GRM155R61A683KA01D
GRM155R61A104KA01D
GRM155R61A154KE19D*
GRM155R61A224KE19D*
GRM155R61A334KE15D*
GRM155R61A474KE15D*
GRM155R61A684KE15D*
GRM155R61A105KE15D*
6.3(0J)
1.0x0.5(15)<0402>
33000pF(333)
47000pF(473)
68000pF(683)
0.10µF(104)
0.15µF(154)
0.22µF(224)
0.33µF(334)
0.47µF(474)
0.68µF(684)
1.0µF(105)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
: Please refer to X7R(R7) etc. Characteristics.
* Please refer to GRM Series Specifications and Test Method (2).
High Dielectric Constant Type X5R(R6) Characteristics
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
46
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
100(2A)
GRM188R61C224KA88D
GRM188R61C474KA93D*
GRM188R61C105KA93D*
GRM188R61C225KE15D*
GRM188R61E104KA01D
GRM188R61E224KA88D
GRM188R61E474KA12D*
GRM188R61E105KA12D*
GRM188R61H102KA01D
GRM188R61H222KA01D
GRM188R61H472KA01D
GRM188R61H103KA01D
GRM188R61H223KA01D
50(1H) 25(1E) 16(1C)
1.6x0.8(18)<0603>
220pF(221)
330pF(331)
470pF(471)
680pF(681)
1000pF(102)
1500pF(152)
2200pF(222)
3300pF(332)
4700pF(472)
6800pF(682)
10000pF(103)
15000pF(153)
22000pF(223)
33000pF(333)
47000pF(473)
68000pF(683)
0.10µF(104)
0.15µF(154)
0.22µF(224)
0.33µF(334)
0.47µF(474)
1.0µF(105)
2.2µF(225)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
10(1A)
GRM188R61A684KA61D
GRM188R61A225KE34D*
GRM188R60J475KE19D*
GRM188R60J106ME47D* GRM188R60G106ME47D*
GRM188R60G226MEA0L*
6.3(0J)4(0G)
1.6x0.8(18)<0603>
0.68µF(684)
2.2µF(225)
4.7µF(475)
10µF(106)
22µF(226)
±10%(K)
±10%(K)
±10%(K)
±20%(M)
±20%(M)
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
: Please refer to X7R(R7) etc. Characteristics.
* Please refer to GRM Series Specifications and Test Method (2).
High Dielectric Constant Type X5R(R6) Characteristics
GR M 18 8 R6 1H 102 K A01 D
Packaging Code in Part Number shows STD 180mm Reel Taping.
qProduct ID wSeries eDimensions (LxW) rDimension (T)
tTemperature Characteristics yRated Voltage uCapacitance
iCapacitance Tolerance oIndividual Specification Code !0Packaging
(Part Number)
wq e r t y u i o !0
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
47
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
100(2A) 50(1H) 25(1E) 16(1C)
2.0x1.25(21)<0805>
6800pF(682)
10000pF(103)
15000pF(153)
22000pF(223)
33000pF(333)
47000pF(473)
68000pF(683)
0.10µF(104)
0.15µF(154)
0.22µF(224)
0.33µF(334)
0.47µF(474)
0.68µF(684)
1.0µF(105)
2.2µF(225)
4.7µF(475)
10µF(106)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
10(1A)
GRM21BR61A225KA01L
GRM21BR61A475KA73L*
GRM219R61A475KE34D*
GRM21BR61A106KE19L*
GRM219R61A106KE44D*
GRM21BR60J475KA11L*
GRM21BR60J106KE19L*
GRM219R60J106KE19D*
GRM21BR60J226ME39L* GRM219R60G226ME66D*
GRM216R61E105KA12D
GRM21BR61E225KA12L
GRM219R61E225KA12D*
GRM21BR61E475KA12L*
GRM21BR61C105KA01L
GRM216R61C105KA88D*
GRM21BR61C225KA88L*
GRM219R61C225KA88D*
GRM21BR61C475KA88L*
GRM219R61C475KE15D*
GRM21BR61C106KE15L*
6.3(0J)4(0G)
2.0x1.25(21)<0805>
2.2µF(225)
4.7µF(475)
10µF(106)
22µF(226)
±10%(K)
±10%(K)
±10%(K)
±20%(M)
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
: Please refer to X7R(R7) etc. Characteristics.
* Please refer to GRM Series Specifications and Test Method (2).
High Dielectric Constant Type X5R(R6) Characteristics
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
48
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
100(2A) 50(1H) 25(1E) 16(1C)
3.2x1.6(31)<1206>
15000pF(153)
22000pF(223)
33000pF(333)
47000pF(473)
68000pF(683)
0.10µF(104)
0.15µF(154)
0.22µF(224)
0.33µF(334)
0.47µF(474)
0.68µF(684)
1.0µF(105)
2.2µF(225)
4.7µF(475)
10µF(106)
22µF(226)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±20%(M)
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
10(1A)
GRM319R61A106KE19L*
GRM31CR61A226ME19L*
GRM31CR61A476ME15L*
GRM31CR60J226ME19L*
GRM31CR60J476ME19L*
GRM31CR60J107ME39L*
GRM31CR61H225KA88L
GRM31CR60G107ME39L*
GRM316R61E225KA12D*
GRM31CR61E475KA88L
GRM319R61E475KA12D*
GRM31CR61E106KA12L*
GRM31CR61C475KA01L
GRM319R61C475KA88D*
GRM31CR61C106KA88L
GRM319R61C106KE15D*
GRM31CR61C226ME15L*
6.3(0J)4(0G)
3.2x1.6(31)<1206>
10µF(106)
22µF(226)
47µF(476)
100µF(107)
±10%(K)
±20%(M)
±20%(M)
±20%(M)
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
100(2A) 50(1H) 35(YA) 25(1E)
3.2x2.5(32)<1210>
0.68µF(684)
1.0µF(105)
2.2µF(225)
4.7µF(475)
10µF(106)
22µF(226)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±20%(M)
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
16(1C)
GRM32ER61C476ME15L* GRM32ER61A476ME20L*
GRM32ER60J107ME20L*
GRM32ER6YA106KA12L GRM32DR61E106KA12L
GRM32ER61E226ME15L*
10(1A) 6.3(0J)
3.2x2.5(32)<1210>
22µF(226)
47µF(476)
100µF(107)
±20%(M)
±20%(M)
±20%(M)
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
: Please refer to X7R(R7) etc. Characteristics.
* Please refer to GRM Series Specifications and Test Method (2).
High Dielectric Constant Type X5R(R6) Characteristics
GR M 31 C R6 1H 225 K A88 L
Packaging Code in Part Number shows STD 180mm Reel Taping.
qProduct ID wSeries eDimensions (LxW) rDimension (T)
tTemperature Characteristics yRated Voltage uCapacitance
iCapacitance Tolerance oIndividual Specification Code !0Packaging
(Part Number)
wq e r t y u i o !0
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
49
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
16(1C) 25(1E) 16(1C)
1.0x0.5(15)<0402>
220pF(221)
330pF(331)
470pF(471)
680pF(681)
1000pF(102)
1500pF(152)
2200pF(222)
3300pF(332)
4700pF(472)
6800pF(682)
10000pF(103)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
16(1C)
GRM185R61C105KE44D* GRM185R61A105KE36D*
10(1A)
1.6x0.8(18)<0603>
1.0µF(105)±10%(K)
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
100(2A) 50(1H) 25(1E) 16(1C)
2.0x1.25(21)<0805>
6800pF(682)
33000pF(333)
68000pF(683)
0.22µF(224)
0.33µF(334)
0.47µF(474)
0.68µF(684)
1.0µF(105)
2.2µF(225)
4.7µF(475)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
10(1A)
GRM219R61A475KE34D*
GRM219R61A106KE44D* GRM219R60J106KE19D*
GRM216R61E105KA12D
GRM219R61E225KA12D*
GRM216R61C105KA88D
GRM219R61C225KA88D*
GRM219R61C475KE15D*
6.3(0J)
GRM219R60G226ME66D*
4(0G)
2.0x1.25(21)<0805>
4.7µF(475)
10µF(106)
22µF(226)
±10%(K)
±10%(K)
±20%(M)
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
: Please refer to X7R(R7) etc. Characteristics.
* Please refer to GRM Series Specifications and Test Method (2).
High Dielectric Constant Type X5R(R6) Characteristics-Low Profile
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
50
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
100(2A) 50(1H) 25(1E) 16(1C)
3.2x1.6(31)<1206>
15000pF(153)
22000pF(223)
33000pF(333)
47000pF(473)
68000pF(683)
0.10µF(104)
0.15µF(154)
0.22µF(224)
0.33µF(334)
0.47µF(474)
0.68µF(684)
1.0µF(105)
2.2µF(225)
4.7µF(475)
10µF(106)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
100(2A)
GRM32DR61E106KA12L
GRM316R61E225KA12D*
GRM319R61E475KA12D* GRM319R61C475KA88D*
GRM319R61C106KE15D*
50(1H) 25(1E)
3.2x2.5(32)<1210>
0.68µF(684)
1.0µF(105)
10µF(106)
±10%(K)
±10%(K)
±10%(K)
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
10(1A)
GRM319R61A106KE19D*
3.2x1.6(31)<1206>
10µF(106)±10%(K)
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
: Please refer to X7R(R7) etc. Characteristics.
* Please refer to GRM Series Specifications and Test Method (2).
High Dielectric Constant Type X5R(R6) Characteristics-Low Profile
GR M 31 6 R6 1E 225 K A12 D
Packaging Code in Part Number shows STD 180mm Reel Taping.
qProduct ID wSeries eDimensions (LxW) rDimension (T)
tTemperature Characteristics yRated Voltage uCapacitance
iCapacitance Tolerance oIndividual Specification Code !0Packaging
(Part Number)
wq e r t y u i o !0
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Continued on the following page.
8Q/
Dissipation Factor
(D.F.)
30pF and over: QU1000
30pF and below:
QU400+20C
C: Nominal Capacitance (pF)
[R6, R7, C8]
W.V.: 100V
:
0.025 max. (CF0.068µF)
: 0.05 max. (CU0.068µF)
W.V.: 50/35/25V:
: 0.025 max.*
*
GRM32D R7/R6/C8 1E106: 0.035 max.
W.V.: 16/10V: 0.035 max.
W.V.: 6.3/4V
: 0.05 max. (CF3.3µF)
: 0.1 max. (CU3.3µF)
[E4]
W.V.: 25Vmin: 0.025 max.
[F1, F5]
W.V.: 25V min.
: 0.05 max. (CF0.1µF)
: 0.09 max. (CU0.1µF)
W.V.: 16/10V: 0.125 max.
W.V.: 6.3V: 0.15 max.
The capacitance/Q/D.F. should be measured at 20/25°C at the
frequency and voltage shown in the table.
7 Capacitance Within the specified tolerance
The insulation resistance should be measured with a DC
voltage not exceeding the rated voltage at 20/25°C and 75%RH
max. and within 2 minutes of charging, provided the charge/
discharge current is less than 50mA.
6Insulation
Resistance
CV0.047µF: More than 10,000M
CG0.047µF: More than 500 · F C: Nominal Capacitance
No failure should be observed when 300%* of the rated voltage
(temperature compensating type) or 250% of the rated voltage
(high dielectric constant type) is applied between the
terminations for 1 to 5 seconds, provided the charge/discharge
current is less than 50mA. *200% for 500V
5 Dielectric Strength No defects or abnormalities
Using calipers (GRM02 size is based on Microscope)4 Dimensions Within the specified dimensions
Visual inspection3 Appearance No defects or abnormalities
The rated voltage is defined as the maximum voltage that may
be applied continuously to the capacitor.
When AC voltage is superimposed on DC voltage, VP-P or VO-P,
whichever is larger, should be maintained within the rated
voltage range.
2 Rated Voltage See the previous pages.
Reference temperature: 25°C
(2, 3, 4, B1, B3, F1, R1: 20°C)
1Operating
Temperature
Range
–55 to +125°C
(2P/R/S/T, 3P/R/S/T/U,
4P/R/S/T/U: –25 to +85°C)
B1, B3, F1: –25 to +85°C
R1, R7: –55 to +125°C
R6: –55 to +85°C
C8: –55 to +105°C
E4: +10 to +85°C
F5: –30 to +85°C
No. Test Method
Specifications
Temperature
Compensating Type High Dielectric Type
Item
C
to 7U, 1X
(1000pF and
below)
Char.
Item
1±0.1MHz
0.5 to 5Vrms
C to 7U, 1X
(more than
1000pF)
R6, R7 , C8,
F5, B1 , B3, F1
1±0.1kHz
1±0.2Vrms
R6, R7, F5
(C>10µF)
120±24Hz
0.5±
0.1Vrms
E4
1±0.1kHz
0.5±
0.05Vrms
Frequency
Voltage
GRM Series Specifications and Test Methods (1) (Note 1)-Typical Inspection
GRM Series Specifications and Test Methods (1) (Note 1)-Typical Inspection
51
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
(Note 1) These Specifications and Test Methods indicate typical inspection.
Please refer to individual specifications (our product specifications or the approval sheet).
When no "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (1).
When "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (2).
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Continued from the preceding page.
Continued on the following page.
Temperature (°C)Step Reference Temperature ±2
–55±3 (for C to 7U/R6/R7/C8)
–30±3 (for F5), 10±3 (for E4)
–25±3 (for other TC)
Reference Temperature ±2
125±3 (for C/R7), 105±3 (for C8)
85±3 (for other TC)
Reference Temperature ±2
1
2
3
4
5
Temperature (°C)Step Reference Temperature ±2
–55±3 (for C8, R1, R7, R6)
–25±3 (for B1, B3, F1)
–30±3 (for F5)/10±3 (for E4)
Reference Temperature ±2
125±3 (for R1, R7)/
85±3 (for B1, B3, R6
F1, F5, E4)/105±3 (for C8)
Reference Temperature ±2
–55±3 (for R1)/
–25±3 (for B1, F1)
Reference Temperature ±2
125±3 (for R1)/
85±3 (for B1, F1)
Applying Voltage (V)
No bias
50% of the rated
voltage
1
2
3
4
5
6
7
8
aType 0.2
0.3
0.4
1.0
1.2
2.2
2.2
3.5
4.5
b
0.56
0.9
1.5
3.0
4.0
5.0
5.0
7.0
8.0
c
0.23
0.3
0.5
1.2
1.65
2.0
2.9
3.7
5.6
GRM02
GRM03
GRM15
GRM18
GRM21
GRM31
GRM32
GRM43
GRM55
Solder the capacitor to the test jig (glass epoxy board) shown in
Fig. 1a using a eutectic solder. Then apply 10N* force in
parallel with the test jig for 10±1 sec.
The soldering should be done either with an iron or using the
reflow method and should be conducted with care so that the
soldering is uniform and free of defects such as heat shock.
*1N (GRM02), 2N (GRM03), 5N (GRM15, GRM18)
(in mm)
10 Adhesive Strength
of Termination
No removal of the terminations or other defect should occur.
Fig. 1a
The capacitance change should be measured after 5 min. at
each specified temp. stage.
(1)Temperature Compensating Type
The temperature coefficient is determined using the
capacitance measured in step 3 as a reference.
When cycling the temperature sequentially from steps 1
through 5 (5C: +25 to +125°C/C: +20 to +125°C: other temp.
coeffs.: +25 to +85°C/+20 to +85°C) the capacitance should be
within the specified tolerance for the temperature coefficient
and capacitance change as in Table A-1.
The capacitance drift is calculated by dividing the differences
between the maximum and minimum measured values in the
steps 1, 3 and 5 by the cap. value in step 3.
(2) High Dielectric Constant Type
The ranges of capacitance change compared with the
Reference Temperature value over the temperature ranges
shown in the table should be within the specified ranges.*
When applying voltage, the capacitance change should be
measured after 1 more min. with applying voltage in
equilibration of each temp. stage.
9
Capacitance
Temperature
Characteristics
No bias Within the specified tolerance
(Table A-1)
B1, B3: Within ±10%
(–25 to +85°C)
R1, R7: Within ±15%
(–55 to +125°C)
R6: Within ±15%
(–55 to +85°C)
E4: Within +22/–56%
(+10 to +85°C)
F1: Within +30/–80%
(–25 to +85°C)
F5: Within +22/–82%
(–30 to +85°C)
C8: Within ±22%
(–55 to +105°C)
50% of
the Rated
Voltage
B1: Within +10/–30%
R1: Within +15/–40%
F1: Within +30/–95%
Capacitance
Drift
Within ±0.2% or ±0.05pF
(whichever is larger.)
*Do not apply to 1X/25V
*Initial measurement for high
dielectric constant type
Perform a heat treatment at
150+0/–10°C for one hour
and then set for 24±2 hours
at room temperature.
Perform the initial
measurement.
No. Test Method
Specifications
Temperature
Compensating Type High Dielectric Type
Item
a
b
c
Baked electrode or
copper foil
Solder resist
GRM Series Specifications and Test Methods (1) (Note 1)-Typical Inspection
GRM Series Specifications and Test Methods (1) (Note 1)-Typical Inspection
52
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
(Note 1) These Specifications and Test Methods indicate typical inspection.
Please refer to individual specifications (our product specifications or the approval sheet).
When no "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (1).
When "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (2).
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Immerse the capacitor in a solution of ethanol (JIS-K-8101) and
rosin (JIS-K-5902) (25% rosin in weight proportion).
Preheat at 80 to 120°C for 10 to 30 seconds.
After preheating, immerse in a eutectic solder solution for
2±0.5 seconds at 230±5°C or Sn-3.0Ag-0.5Cu solder solution
for 2±0.5 seconds at 245±5°C.
13 Solderability of
Termination 75% of the terminations are to be soldered evenly and
continuously.
Continued from the preceding page.
Continued on the following page.
Solder the capacitor on the test jig (glass epoxy board) shown
in Fig. 2a using a eutectic solder. Then apply a force in the
direction shown in Fig. 3a for 5±1 sec. The soldering should be
done by the reflow method and should be conducted with care
so that the soldering is uniform and free of defects such as heat
shock.
Fig. 2a
(in mm)
12 Deflection
Appearance
No marking defects
Capacitance
Change
Within ±5% or ±0.5pF
(whichever is larger) Within ±10%
Fig. 3a
Solder the capacitor on the test jig (glass epoxy board) in the
same manner and under the same conditions as (10).
The capacitor should be subjected to a simple harmonic motion
having a total amplitude of 1.5mm, the frequency being varied
uniformly between the approximate limits of 10 and 55Hz. The
frequency range, from 10 to 55Hz and return to 10Hz, should
be traversed in approximately 1 minute. This motion should be
applied for a period of 2 hours in each of 3 mutually
perpendicular directions (total of 6 hours).
11
Vibration
Resistance
Appearance
No defects or abnormalities
Capacitance
Within the specified tolerance
Q/D.F.
30pF and over: QU1000
30pF and below:
QU400+20C
C: Nominal Capacitance (pF)
[B1, B3, R6, R7, C8]
W.V.: 100V
:
0.025 max. (CF0.068µF)
: 0.05 max. (CU0.068µF)
W.V.: 50/35/25V:
: 0.025 max.*
*
GRM32D R7/R6/C8 1E106: 0.035 max.
W.V.: 16/10V: 0.035 max.
W.V.: 6.3/4V
: 0.05 max. (CF3.3µF)
: 0.1 max. (CU3.3µF)
[E4]
W.V.: 25Vmin: 0.025 max.
[F1, F5]
W.V.: 25V min.
: 0.05 max. (CF0.1µF)
: 0.09 max. (CU0.1µF)
W.V.: 16/10V: 0.125 max.
W.V.: 6.3V: 0.15 max.
Capacitance meter
Flexure : V1
20 50
R230
Pressurizing
speed: 1.0mm/sec.
Pressurize
45 45
UVZ¦§«
RVW£§¨
b
,QTUVWXY\¢¥¦§¨©ª
,
QRSV
Z[]^_`
¢£¤§
«¬®¯°±
,QT¢¥
,
Q
]
¢
®
a
,Q¢
,QRU¢£¦
c
SW¤¨
VZ§«
100
t: 1.6mm (GRM02/03/15: t: 0.8mm)
_`°±
40
φ4.5
aType 0.2
0.3
0.4
1.0
1.2
2.2
2.2
3.5
4.5
b
0.56
0.9
1.5
3.0
4.0
5.0
5.0
7.0
8.0
c
0.23
0.3
0.5
1.2
1.65
2.0
2.9
3.7
5.6
GRM02
GRM03
GRM15
GRM18
GRM21
GRM31
GRM32
GRM43
GRM55
No. Test Method
Specifications
Temperature
Compensating Type High Dielectric Type
Item
GRM Series Specifications and Test Methods (1) (Note 1)-Typical Inspection
GRM Series Specifications and Test Methods (1) (Note 1)-Typical Inspection
53
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
(Note 1) These Specifications and Test Methods indicate typical inspection.
Please refer to individual specifications (our product specifications or the approval sheet).
When no "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (1).
When "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (2).
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Continued from the preceding page.
Continued on the following page.
TemperatureStep 100 to 120°C
170 to 200°C
Time
1 min.
1 min.
1
2
1Step Min.
Operating
Temp. +0/–3
30±3
2
Room
Temp.
2 to 3
3
Max.
Operating
Temp. +3/–0
30±3
4
Room
Temp.
2 to 3
Temp. (°C)
Time (min.)
Fix the capacitor to the supporting jig in the same
manner and under the same conditions as (10).
Perform the five cycles according to the four heat treatments
shown in the following table.
Set for 24±2 hours at room temperature, then measure.
•Initial measurement for high dielectric constant type
Perform a heat treatment at 150+0/–10°C for one hour and
then set at room temperature for 24±2 hours.
Perform the initial measurement.
15
Temperature
Cycle
The measured and observed characteristics should satisfy the
specifications in the following table.
Appearance
No defects or abnormalities
Capacitance
Change
Within ±2.5% or ±0.25pF
(whichever is larger)
B1, B3, R1, R6, R7, C8:
Within ±7.5%
F1, F5, E4: Within ±20%
Q/D.F.
30pF and over: QU1000
30pF and below:
QU400+20C
C: Nominal Capacitance (pF)
[B1, B3, R6, R7, C8]
W.V.: 100V
:
0.025 max. (CF0.068µF)
: 0.05 max. (CU0.068µF)
W.V.: 50/35/25V:
: 0.025 max.*
*
GRM32D R7/R6/C8 1E106: 0.035 max.
W.V.: 16/10V: 0.035 max.
W.V.: 6.3/4V
: 0.05 max. (CF3.3µF)
: 0.1 max. (CU3.3µF)
[E4]
W.V.: 25Vmin: 0.05 max.
[F1, F5]
W.V.: 25V min.
: 0.05 max. (CF0.1µF)
: 0.09 max. (CU0.1µF)
W.V.: 16/10V: 0.125 max.
W.V.: 6.3V: 0.15 max.
I.R. More than 10,000M or 500 · F (whichever is smaller)
Dielectric
Strength
No defects
Preheat the capacitor at 120 to 150°C for 1 minute.
Immerse the capacitor in a eutectic solder or Sn-3.0Ag-0.5Cu
solder solution at 270±5°C for 10±0.5 seconds. Set at room
temperature for 24±2 hours, then measure.
•Initial measurement for high dielectric constant type
Perform a heat treatment at 150+0/–10°C for one hour and
then set at room temperature for 24±2 hours.
Perform the initial measurement.
•Preheating for GRM32/43/55
14
Resistance
to
Soldering
Heat
The measured and observed characteristics should satisfy the
specifications in the following table.
Appearance
No defects or abnormalities
Capacitance
Change
Within ±2.5% or ±0.25pF
(whichever is larger)
B1, B3, R1, R6, R7, C8:
Within ±7.5%
F1, F5, E4: Within ±20%
Q/D.F.
30pF and over: QU1000
30pF and below:
QU400+20C
C: Nominal Capacitance (pF)
[B1, B3, R6, R7, C8]
W.V.: 100V
:
0.025 max. (CF0.068µF)
: 0.05 max. (CU0.068µF)
W.V.: 50/35/25V:
: 0.025 max.*
*
GRM32D R7/R6/C8 1E106: 0.035 max.
W.V.: 16/10V: 0.035 max.
W.V.: 6.3/4V
: 0.05 max. (CF3.3µF)
: 0.1 max. (CU3.3µF)
[E4]
W.V.: 25Vmin: 0.025 max.
[F1, F5]
W.V.: 25V min.
: 0.05 max. (CF0.1µF)
: 0.09 max. (CU0.1µF)
W.V.: 16/10V: 0.125 max.
W.V.: 6.3V: 0.15 max.
I.R. More than 10,000M or 500 · F (whichever is smaller)
Dielectric
Strength
No defects
No. Test Method
Specifications
Temperature
Compensating Type High Dielectric Type
Item
GRM Series Specifications and Test Methods (1) (Note 1)-Typical Inspection
GRM Series Specifications and Test Methods (1) (Note 1)-Typical Inspection
54
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
(Note 1) These Specifications and Test Methods indicate typical inspection.
Please refer to individual specifications (our product specifications or the approval sheet).
When no "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (1).
When "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (2).
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Continued from the preceding page.
Continued on the following page.
Apply the rated voltage at 40±2°C and 90 to 95% humidity for
500±12 hours. Remove and set for 24±2 hours at room
temperature, then measure.
The charge/discharge current is less than 50mA.
•Initial measurement for F1, F5/10V max.
Apply the rated DC voltage for 1 hour at 40±2°C.
Remove and set for 24±2 hours at room temperature.
Perform initial measurement.
17
Humidity
Load
The measured and observed characteristics should satisfy the
specifications in the following table.
Appearance
No defects or abnormalities
Capacitance
Change
Within ±7.5% or ±0.75pF
(whichever is larger)
B1, B3, R1, R6, R7, C8:
Within ±12.5%
F1, F5, E4: Within ±30%
[W.V.: 10V max.]
F1, F5: Within +30/–40%
Q/D.F.
30pF and over: QU200
30pF and below:
QU100+10C/3
C: Nominal Capacitance (pF)
[B1, B3, R6, R7, C8]
W.V.: 100V
: 0.05 max. (CF0.068µF)
:
0.075 max. (CU0.068µF)
W.V.: 50/35/25/16/10V
: 0.05 max.
W.V.: 6.3/4V
: 0.075 max. (CF3.3µF)
: 0.125 max. (CU3.3µF)
[E4]
W.V.: 25Vmin: 0.05 max.
[F1, F5]
W.V.: 25V min.
: 0.075 max. (CF0.1µF)
: 0.125 max. (CU0.1µF)
W.V.: 16/10V: 0.15 max.
W.V.: 6.3V: 0.2 max.
I.R. More than 500M or 25 · F (whichever is smaller)
Set the capacitor at 40±2°C and in 90 to 95% humidity for
500±12 hours.
Remove and set for 24±2 hours at room temperature, then
measure.
16 Humidity
(Steady
State)
The measured and observed characteristics should satisfy the
specifications in the following table.
Appearance
No defects or abnormalities
Capacitance
Change
Within ±5% or ±0.5pF
(whichever is larger)
B1, B3, R1, R6, R7, C8:
Within ±12.5%
F1, F5, E4: Within ±30%
Q/D.F.
30pF and over: QU350
10pF and over
30pF and below:
QU275+2.5C
10pF and below:
QU200+10C
C: Nominal Capacitance (pF)
[R6, R7, C8]
W.V.: 100V
: 0.05 max. (CF0.068µF)
:
0.075 max. (CU0.068µF)
W.V.: 50/35/25/16/10V
: 0.05 max.
W.V.: 6.3/4V
: 0.075 max. (CF3.3µF)
: 0.125 max. (CU3.3µF)
[E4]
W.V.: 25Vmin: 0.05 max.
[F1, F5]
W.V.: 25V min.
: 0.075 max. (CF0.1µF)
: 0.125 max. (CU0.1µF)
W.V.: 16/10V: 0.15 max.
W.V.: 6.3V: 0.2 max.
I.R. More than 1,000M or 50 · F (whichever is smaller)
No. Test Method
Specifications
Temperature
Compensating Type High Dielectric Type
Item
GRM Series Specifications and Test Methods (1) (Note 1)-Typical Inspection
GRM Series Specifications and Test Methods (1) (Note 1)-Typical Inspection
55
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
(Note 1) These Specifications and Test Methods indicate typical inspection.
Please refer to individual specifications (our product specifications or the approval sheet).
When no "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (1).
When "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (2).
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
*1: Nominal values denote the temperature coefficient within a range of 25°C to 125°C (for C)/85°C (for other TC).
Continued from the preceding page.
Apply 200%* of the rated voltage at the maximum operating
temperature ±3°C for 1000±12 hours.
Set for 24±2 hours at room temperature, then measure.
The charge/discharge current is less than 50mA.
•Initial measurement for high dielectric constant type.
Apply 200% of the rated voltage* at the maximum operating
temperature ±3°C for one hour. Remove and set for 24±2
hours at room temperature.
Perform initial measurement.
*GRM155C81E 683/104, GRM188C81E105,
GRM188C81E105, GRM21BR71H105, GRM21BR72A474,
GRM21BR71C225, GRM31CR71H475,
GRM32E R6/R7 YA106, GRM32D R7/R6/C8 1E106
: 150% of the rated voltage.
18
High
Temperature
Load
The measured and observed characteristics should satisfy the
specifications in the following table.
Appearance
No defects or abnormalities
Capacitance
Change
Within ±3% or ±0.3pF
(whichever is larger)
B1, B3, R1, R6, R7, C8:
Within ±12.5%
F1, F5, E4: Within ±30%
[Except 10V max. and.
CU1.0µF]
F1, F5: Within +30/–40%
[10V max. and CU1.0µF]
Q/D.F.
30pF and over: QU350
10pF and over
30pF and below:
QU275+2.5C
10pF and below:
QU200+10C
C: Nominal Capacitance (pF)
[B1, B3, R6, R7, C8]
W.V.: 100V
: 0.05 max. (CF0.068µF)
:
0.075 max. (CU0.068µF)
W.V.: 50/35/25/16/10V
: 0.05 max.
W.V.: 6.3/4V
: 0.075 max. (CF3.3µF)
: 0.125 max. (CU3.3µF)
[E4]
W.V.: 25Vmin: 0.05 max.
[F1, F5]
W.V.: 25V min.
: 0.075 max.(CF0.1µF)
: 0.125 max.(CU0.1µF)
W.V.: 16/10V: 0.15 max.
W.V.: 6.3V: 0.2 max.
I.R. More than 1,000M or 50 · F (whichever is smaller)
No. Test Method
Specifications
Temperature
Compensating Type High Dielectric Type
Item
Char.
+350 to –1000
Max.
Nominal Values (ppm/°C)*1 –55
0.58
0.87
2.33
3.02
4.09
5.46
8.78
Min.
–0.24
–0.48
0.72
1.28
2.16
3.28
5.04
Max. –30
Capacitance Change from 25°C (%)
0.40
0.59
1.61
2.08
2.81
3.75
6.04
Min.
–0.17
–0.33
0.50
0.88
1.49
2.26
3.47
Max. –10
0.25
0.38
1.02
1.32
1.79
2.39
3.84
Min.
–0.11
–0.21
0.32
0.56
0.95
1.44
2.21
5C
6C
6P
6R
6S
6T
7U
1X
Table A-1
(1)
*2: Nominal values denote the temperature coefficient within a range of 20°C to 125°C (for C)/85°C (for other TC).
Char. Max.
Nominal Values (ppm/°C)*2 –55
0.82
1.37
2.56
Min.
–0.45
–0.90
–1.88
Max. –25
Capacitance Change from 20°C (%)
0.49
0.82
1.54
1.32
1.65
2.36
1.70
2.03
2.74
2.30
2.63
3.35
3.07
3.40
4.12
4.94
5.65
Min.
–0.27
–0.54
–1.13
0.41
0.14
–0.45
0.72
0.45
–0.14
1.22
0.95
0.36
1.85
1.58
0.99
2.84
2.25
Max. –10
0.33
0.55
1.02
0.88
1.10
1.57
1.13
1.35
1.83
1.54
1.76
2.23
2.05
2.27
2.74
3.29
3.77
Min.
–0.18
–0.36
–0.75
0.27
0.09
–0.30
0.48
0.30
–0.09
0.81
0.63
0.24
1.23
1.05
0.66
1.89
1.50
2C
3C
4C
2P
3P
4P
2R
3R
4R
2S
3S
4S
2T
3T
4T
3U
4U
(2)
GRM Series Specifications and Test Methods (1) (Note 1)-Typical Inspection
±30
±60
±60
±60
±60
±60
±120
0
0
–150
–220
–330
–470
–750
0
0
0
–150
–150
–150
–220
–220
–220
–330
–330
–330
–470
–470
–470
–750
–750
±60
±120
±250
±60
±120
±250
±60
±120
±250
±60
±120
±250
±60
±120
±250
±120
±250
GRM Series Specifications and Test Methods (1) (Note 1)-Typical Inspection
56
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
(Note 1) These Specifications and Test Methods indicate typical inspection.
Please refer to individual specifications (our product specifications or the approval sheet).
When no "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (1).
When "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (2).
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Continued on the following page.
Measuring Frequency
Nominal Capacitance 1±0.1kHz
1±0.1kHz
120±24Hz
1±0.1kHz
Measuring Voltage
1.0±0.2Vrms
0.5±0.1Vrms
0.5±0.1Vrms
0.5±0.1Vrms
CV10µF (10V min.)*
CV10µF (6.3V max.)
CG10µF
*For items in Table1
8Dissipation Factor
(D.F.)
B1, B3, R1, *R6, *R7, C7, C8, E7, D7: 0.1 max.
C6: 0.125 max.
D8: 0.15 max.
F1, F5: 0.2 max.
*GRM31CR71E106: 0.125 max.
GRM31CR6 0J/0G 107: 0.15 max.
The capacitance/D.F. should be measured at reference
temperature at the measuring frequency and voltage shown in
the table.
GRM188C80E106:
Perform a heat treatment at 150+0/-10°C for one hour and then
set for 24±2 hours at room temperature.
7 Capacitance
Within the specified tolerance
*Table 1
The insulation resistance should be measured with a DC voltage
not exceeding the rated voltage at reference temperature and
75%RH max. and within 1 minutes of charging, provided the
charge/discharge current is less than 50mA.
6Insulation
Resistance More than 50 · F
No failure should be observed when 250% of the rated voltage
is applied between the terminations for 1 to 5 seconds,
provided the charge/discharge current is less than 50mA.
5 Dielectric Strength No defects or abnormalities
Using calipers (GRM02 size is based on Microscope)4 Dimensions Within the specified dimensions
Visual inspection3 Appearance No defects or abnormalities
The rated voltage is defined as the maximum voltage that may
be applied continuously to the capacitor.
When AC voltage is superimposed on DC voltage, VP-P or VO-P,
whichever is larger, should be maintained within the rated
voltage range.
2 Rated Voltage See the previous pages.
Reference temperature: 25°C
(B1, B3, R1, F1: 20°C)
1Operating
Temperature
Range
B1, B3, F1: –25 to +85°C
R1, R7, C7, D7, E7: –55 to +125°C
C6, R6: –55 to +85°C
F5: –30 to +85°C
C8, D8: –55 to +105°C,
No. Test MethodSpecificationsItem
GRM Series Specifications and Test Methods (2) (Note 1)-Typical Inspection
GRM022 B3/R6 1A 681 to 103
GRM155 B3/R6 1A 124 to 105
GRM185 B3/R6 1C/1A 105
GRM185 C8/D7 1A 105
GRM188 B3/R6 1C/1A 225
GRM188 R7/C8 1A 225
GRM188 B3/R6 1A 335
GRM219 B3/R6 1C/1A 475
GRM219 C8 1A 475
GRM219 B3/R6 1A 106
GRM21B B3/R6 1C/1A 106
GRM21B R7/C8 1A 106
GRM319 B3/R6 1C/1A 106
GRM Series Specifications and Test Methods (2) (Note 1)-Typical Inspection
57
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
(Note 1) These Specifications and Test Methods indicate typical inspection.
Please refer to individual specifications (our product specifications or the approval sheet).
When no "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (1).
When "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (2).
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Continued from the preceding page.
Continued on the following page.
Solder the capacitor on the test jig (glass epoxy board) in the
same manner and under the same conditions as (10).
The capacitor should be subjected to a simple harmonic motion
having a total amplitude of 1.5mm, the frequency being varied
uniformly between the approximate limits of 10 and 55Hz. The
frequency range, from 10 to 55Hz and return to 10Hz, should
be traversed in approximately 1 minute. This motion should be
applied for a period of 2 hours in each of 3 mutually
perpendicular directions (total of 6 hours).
11 Vibration
Appearance
No defects or abnormalities
Capacitance
Within the specified tolerance
D.F.
B1, B3, R1, *R6, *R7, C7, C8, E7, D7: 0.1 max.
C6: 0.125 max.
D8: 0.15 max.
F1, F5: 0.2 max.
*GRM31CR71E106: 0.125 max.
GRM31CR6 0J/0G 107: 0.15 max.
Solder the capacitor on the test jig (glass epoxy board) shown
in Fig. 1a using a eutectic solder. Then apply 10N* force in
parallel with the test jig for 10±1sec.
The soldering should be done either with an iron or using the
reflow method and should be conducted with care so that the
soldering is uniform and free of defects such as heat shock.
*1N: GRM02, 2N: GRM03, 5N: GRM15/GRM18
10 Adhesive Strength
of Termination
No removal of the terminations or other defects should occur.
Fig. 1a
GRM Series Specifications and Test Methods (2) (Note 1)-Typical Inspection
aType 0.2
0.3
0.4
1.0
1.2
2.2
2.2
3.5
4.5
b
0.56
0.9
1.5
3.0
4.0
5.0
5.0
7.0
8.0
c
0.23
0.3
0.5
1.2
1.65
2.0
2.9
3.7
5.6
GRM02
GRM03
GRM15
GRM18
GRM21
GRM31
GRM32
GRM43
GRM55
a
b
c
Baked electrode or
copper foil
Solder resist
The capacitance change should be measured after 5 min. at
each specified temp. stage.
The ranges of capacitance change compared with the
reference temperature value over the temperature ranges
shown in the table should be within the specified ranges.*
In case of applying voltage, the capacitance change should be
measured after 1 more min. with applying voltage in
equilibration of each temp. stage.
*GRM32DR60J226, GRM43 B1/B3/R6 0J/1A 336/476: 1.0±0.2Vrms
GRM155B30G475, GRM155B30J 225, GRM21BB30J476,
GRM155R60E106, GRM188 B3/R6 0E/0G/0J 226: 0.2±0.05Vrms
•Initial measurement for high dielectric constant type
Perform a heat treatment at 150 +0/–10°C for one hour and
then set for 24±2 hours at room temperature.
Perform the initial measurement.
9
Capacitance
Temperature
Characteristics
No bias
B1, B3 : Within ±10% (–25 to +85°C)
F1 : Within +30/–80% (–25 to +85°C)
R6 : Within ±15% (–55 to +85°C)
R1, R7 : Within ±15% (–55 to +125°C)
F5 : Within +22/–82% (–30 to +85°C)
C6 : Within ±22% (–55 to +85°C)
C7 : Within ±22% (–55 to +125°C)
C8 : Within ±22% (–55 to +105°C)
D7 : Within +22/–33% (–55 to +125°C)
E7 : Within +22/–56% (–55 to +125°C)
D8 : Within +22/–33% (–55 to +105°C)
50% of
the Rated
Voltage
B1: Within +10/–30%
R1: Within +15/–40%
F1: Within +30/–95%
Temperature (°C)Step 25±2 (
for R6, R7, C6, C7, C8, D7, D8, E7, F5
)
20±2 (for B1, B3, F1, R1)
–55±3 (
for R1, R6, R7, C6, C7, C8, D7, D8, E7
)
–30±3 (for F5)
–25±3 (for B1, B3, F1)
25±2 (
for R6, R7, C6, C7, C8, D7, D8, E7, F5
)
20±2 (for B1, B3, F1, R1)
125±3 (for R1, R7, C7, D7, E7)
105±3 (for C8, D8)
85±3 (for B1, B3, F1, F5, R6, C6)
20±2 (for B1, F1, R1)
–55±3 (for R1)
–25±3 (for B1, F1)
20±2 (for B1, F1, R1)
125±3 (for R1)
85±3 (for B1, F1)
Applying Voltage (V)
No bias
50% of the
rated voltage
1
2
3
4
5
6
7
8
No. Test MethodSpecificationsItem
GRM Series Specifications and Test Methods (2) (Note 1)-Typical Inspection
58
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
(Note 1) These Specifications and Test Methods indicate typical inspection.
Please refer to individual specifications (our product specifications or the approval sheet).
When no "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (1).
When "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (2).
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Continued from the preceding page.
Fix the capacitor to the supporting jig in the same manner and
under the same conditions as (10).
Perform the five cycles according to the four heat treatments
shown in the following table.
Set for 24±2 hours at room temperature, then measure.
•Initial measurement for high dielectric constant type
Perform a heat treatment at 150+0/–10°C for one hour and
then set at room temperature for 24±2 hours.
Perform the initial measurement.
GRM188R60J106 only Measurement after test Perform a heat
treatment and then let sit for 24±2 hours at room temperature,
then measure.
15
Temperature
Sudden
Change
Appearance
No defects or abnormalities
Dielectric
Strength
No defects
I.R. More than 50 · F
D.F.
B1, B3, R1, *R6, *R7, C7, C8, E7, D7: 0.1 max.
C6: 0.125 max.
D8: 0.15 max.
F1, F5: 0.2 max.
*GRM31CR71E106: 0.125 max.
GRM31CR6 0J/0G 107: 0.15 max.
Capacitance
Change
B1, B3, R1, R6, R7, C6, C7, C8, D7, D8: Within ±7.5%
E7: Within ±30%
F1, F5: Within ±20%
Preheat the capacitor at 120 to 150°C for 1 minute.
Immerse the capacitor in a eutectic solder* or Sn-3.0Ag-0.5Cu
solder solution at 270±5°C for 10±0.5 seconds. Set at room
temperature for 24±2 hours, then measure.
*Do not apply to GRM02.
•Initial measurement for high dielectric constant type
Perform a heat treatment at 150+0/–10°C for one hour and
then set at room temperature for 24±2 hours.
Perform the initial measurement.
*Preheating for GRM32/43/55
14
Resistance
to
Soldering
Heat
Appearance
No defects or abnormalities
Dielectric
Strength
No defects
I.R. More than 50 · F
D.F.
B1, B3, R1, *R6, *R7, C7, C8, E7, D7: 0.1 max.
C6: 0.125 max.
D8: 0.15 max.
F1, F5: 0.2 max.
*GRM31CR71E106: 0.125 max.
GRM31CR6 0J/0G 107: 0.15 max.
Capacitance
Change
B1, B3, R1, *R6, R7, C6, C7, *C8, E7, D7, D8: Within ±7.5%
F1, F5: Within ±20%
*
GRM188R6 0J/0G 106, GRM188C8 0E/0G 106, GRM219R60G226:
Within ±12.5%
GRM155R60G475,
GRM155R60E106, GRM188R60G226:
Within ±15%
GRM Series Specifications and Test Methods (2) (Note 1)-Typical Inspection
TemperatureStep 100 to 120°C
170 to 200°C
Time
1 min.
1 min.
1
2
1Step Min.
Operating
Temp. +0/–3
30±3
2
Room
Temp.
2 to 3
3
Max.
Operating
Temp. +3/–0
30±3
4
Room
Temp.
2 to 3
Temp. (°C)
Time (min.)
Continued on the following page.
Immerse the capacitor in a solution of ethanol (JIS-K-8101) and
rosin (JIS-K-5902) (25% rosin in weight proportion).
Preheat at 80 to 120°C for 10 to 30 seconds.
After preheating, immerse in a eutectic solder solution for
2±0.5 seconds at 230±5°C or Sn-3.0Ag-0.5Cu solder solution
for 2±0.5 seconds at 245±5°C.
13 Solderability of
Termination 75% of the terminations is to be soldered evenly and
continuously.
Solder the capacitor on the test jig (glass epoxy board) shown
in Fig. 2a using a eutectic solder. Then apply a force in the
direction shown in Fig. 3a for 5±1 sec. The soldering should be
done by the reflow method and should be conducted with care
so that the soldering is uniform and free of defects such as heat
shock.
Fig. 2a
(in mm)
12 Deflection
Appearance
No marking defects
Capacitance
Change
Within ±10%
Fig.3a
aType 0.2
0.3
0.4
1.0
1.2
2.2
2.2
3.5
4.5
b
0.56
0.9
1.5
3.0
4.0
5.0
5.0
7.0
8.0
c
0.23
0.3
0.5
1.2
1.65
2.0
2.9
3.7
5.6
GRM02
GRM03
GRM15
GRM18
GRM21
GRM31
GRM32
GRM43
GRM55
Capacitance meter
Flexure : V1
20 50
R230
Pressurizing
speed: 1.0mm/sec.
Pressurize
45 45
Z[_«¬°
W[\¨¬
b
,QUVXYZ[\]^¢¦§©ª«¬®¯
,
QRSTVWX
[
[
^_`
¢£¤¥§¨©
¬
¬
¯°±
,QRV¢£§
,QRV¢£§
a
VW§¨
c
WX\¨©
Z[_«¬°
100 t: 1.6mm
(GRM02/03/15: t: 0.8mm)
T¥
40
ø4.5
No. Test MethodSpecificationsItem
GRM Series Specifications and Test Methods (2) (Note 1)-Typical Inspection
59
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
(Note 1) These Specifications and Test Methods indicate typical inspection.
Please refer to individual specifications (our product specifications or the approval sheet).
When no "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (1).
When "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (2).
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Continued from the preceding page.
Apply 150%* of the rated voltage for 1000±12 hours at the
maximum operating temperature ±3°C. Let sit for 24±2 hours at
room temperature, then measure.
The charge/discharge current is less than 50mA.
* Part Numbers with # have individual specification.
As for these Part Numbers, please refer to table A.
•Initial measurement
Perform a heat treatment at 150+0/–10°C for one hour and
then let sit for 24±2 hours at room temperature. Perform the
initial measurement.
•Measurement after test
Perform a heat treatment at 150+0/–10°C for one hour and
then let sit for 24±2 hours at room temperature, then measure.
17
Durability
Appearance
No defects or abnormalities
I.R. More than 25 · F
D.F. B1, B3, R1, R6, R7, C6, C7, *C8, E7, D7, D8: 0.2 max.
F1, F5: 0.4 max.
*GRM319C81A106, GRM31MC81A106: 0.125 max.
Capacitance
Change
B1, B3, R1, *R6, R7, C6, C7, *C8, E7, D7, D8: Within ±12.5%
F1, F5: Within ±30%
*GRM188C8 0E/0G 106, GRM219R60G226: within ±15%
Apply the rated voltage at 40±2°C and 90 to 95% humidity for
500±12 hours. The charge/discharge current is less than 50mA.
•Initial measurement
Perform a heat treatment at 150+0/–10°C for one hour and
then let sit for 24±2 hours at room temperature. Perform the
initial measurement.
•Measurement after test
Perform a heat treatment at 150+0/–10°C for one hour and
then let sit for 24±2 hours at room temperature, then measure.
16
High
Temperature
High
Humidity
(Steady)
Appearance
No defects or abnormalities
I.R. More than 12.5 · F
D.F. B1, B3, R1, R6, R7, C6, C7, *C8, E7, D7, D8: 0.2 max.
F1, F5: 0.4 max.
*GRM319C81A106, GRM31MC81A106: 0.125 max.
Capacitance
Change
B1, B3, R1, R6, R7, C6, C7, C8, E7, D7, D8: Within ±12.5%
F1, F5: Within ±30%
No. Test MethodSpecificationsItem
GRM Series Specifications and Test Methods (2) (Note 1)-Typical Inspection
Part Number Dimension
LZW (mm)
1.0Z0.5
1.0Z0.5
1.6Z0.8
2.0Z1.25
3.2Z1.6
3.2Z1.6
GRM155C80J684KE15D
GRM155C80J684ME15D
GRM188C80G106ME47D
GRM21BC80J226ME51L
GRM319D71C475KA12D
GRM319D71C475MA12D
Temp. Char.
X6S
X6S
X6S
X6S
X7T
X7T
6.3
6.3
4
6.3
16
16
Capacitance
(F)
0.68µ
0.68µ
10µ
22µ
4.7µ
4.7µ
Cap. Tol
(%)
±10%
±20%
±20%
±20%
±10%
±20%
Spec. Test
Methods
(2)
(2)
(2)
(2)
(2)
(2)
Applied Testing
Voltage at Durability
Rated Volt. Z100%
Rated Volt. Z100%
Rated Volt. Z100%
Rated Volt. Z100%
Rated Volt. Z100%
Rated Volt. Z100%
Part Numbers of table A are designed for use in the
circuits where continuous applied voltage to the
capacitor is derated than rated voltage.
These Part Numbers guarantee Durability Test with
100% x rated voltage as testing voltage at the
maximum operating temperature.
The following voltage and temperature derating
conditions are recommended for use to ensure the
same reliability level as normal specification.
• Recommended Derating Conditions on Voltage and Temperature
Table A
0
20
0
40
60
80
100
120
25 50 75 100
Temperature at Product (°C)
Ratio [Operating Voltage/Rated Voltage (%)]
125 150
Product
for 125°C
Product
for 105°C
Product
for 85°C
Rated Volt.
(Vdc)
GRM Series Specifications and Test Methods (2) (Note 1)-Typical Inspection
60
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
(Note 1) These Specifications and Test Methods indicate typical inspection.
Please refer to individual specifications (our product specifications or the approval sheet).
When no "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (1).
When "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (2).
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
GRM Series Data
Continued on the following page.
Capacitance - Temperature Characteristics Capacitance Change - Aging
Impedance - Frequency Characteristics
5C: GRM15 R: GRM15
R
-20
-15
-10
-5
0
5
10
15
20
-60 -40 -20 0 20 40 60 80 100 120 140
5C
R6
R7
Measuring condition: 5C ··· 1MHz, R ··· 1kHz
Temperature (°C)
Capacitance Change (%)
-40
-30
-20
-10
0
10
20
10 100 1000 10000
Measuring condition: 5C ··· 1MHz, R ··· 1kHz
Time (Hr)
Capacitance Change (%)
5C
R
0.01
0.1
1
10
100
100001000100101
1000pF
100pF
10pF 1pF
0.001
0.01
0.1
1
10
100
0.1µF
0.01µF
1000pF
10001001010.1
0.001
0.01
0.1
1
10
100
0.01 0.1 1 10 100
GRM15 1µF
GRM18 10µF
GRM31 100µF
Frequency (MHz)Frequency (MHz)
Frequency (MHz)
Impedance () Impedance ()
Impedance ()
The data herein are given in typical values, not guaranteed ratings.
Continued on the following page.
Please refer to our Web site or contact our sales representatives for individual Part Number's data.
Our Web Site: http://www.murata.com/products/capacitor/tech_data/
GRM Series Data
61
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
GRM Series Data
Continued from the preceding page.
Continued on the following page.
Capacitance - DC Voltage Characteristics
Temperature Compensating Type: GRM1555C1H102JA01 High Dielectric Constant Type: GRM155R71E103KA01
High Dielectric Constant Type: GRM155R71C104KA88
High Dielectric Constant Type: GRM188R60J106ME47 High Dielectric Constant Type: GRM31CR60J107ME39
-100
-80
-60
-40
-20
0
20
0 102030405060 -100
-80
-60
-40
-20
0
20
0 2 4 6 8 10 12 14 16 18 20 22 24 26
-100
-80
-60
-40
-20
0
20
0 2 4 6 8 10 12 14 16 18
-100
-80
-60
-40
-20
0
20
01234567 -100
-80
-60
-40
-20
0
20
01234567
Measuring condition: 1MHz Measuring condition: 1kHz
Measuring condition: 1kHz
Measuring condition: 1kHz Measuring condition: 120Hz
DC V oltage (VDC) DC Voltage (VDC)
DC V oltage (VDC)
DC V oltage (VDC) DC Voltage (VDC)
Capacitance Change (%)
Capacitance Change (%) Capacitance Change (%)
Capacitance Change (%)
Capacitance Change (%)
The data herein are given in typical values, not guaranteed ratings.
-100
-80
-60
-40
-20
0
20
432105876 9 10 11
DC Voltage (VDC)
High Dielectric Constant Type: GRM155R61A105KE15
Measuring condition: 1kHz
Capacitance Change (%)
Continued on the following page.
Please refer to our Web site or contact our sales representatives for individual Part Number's data.
Our Web Site: http://www.murata.com/products/capacitor/tech_data/
GRM Series Data
62
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
GRM Series Data
Continued from the preceding page.
Capacitance - AC Voltage Characteristics
Temperature Compensating Type: GRM1555C1H102JA01 High Dielectric Constant Type: GRM155R71E103KA01
High Dielectric Constant Type: GRM155R71C104KA88
High Dielectric Constant Type: GRM188R60J106ME47 High Dielectric Constant Type: GRM31CR60J107ME39
-60
-50
-40
-30
-20
-10
0
10
20
30
0.0 0.5 1.0 1.5 2.0 2.5 -60
-50
-40
-30
-20
-10
0
10
20
30
0.0 0.5 1.0 1.5 2.0 2.5
-60
-50
-40
-30
-20
-10
0
10
20
30
0.0 0.5 1.0 1.5 2.0 2.5
-60
-50
-40
-30
-20
-10
0
10
20
30
0.0 0.5 1.0 1.5 2.0 2.5 -60
-50
-40
-30
-20
-10
0
10
20
30
0.0 0.5 1.0 1.5 2.0 2.5
Measuring condition: 1kHzMeasuring condition: 1MHz
Measuring condition: 1kHz
Measuring condition: 1kHz Measuring condition: 120Hz
AC Voltage (Vr.m.s.) AC Voltage (Vr.m.s.)
AC Voltage (Vr.m.s.)
AC Voltage (Vr.m.s.) AC Voltage (Vr.m.s.)
Capacitance Change (%) Capacitance Change (%)
Capacitance Change (%)
Capacitance Change (%)
Capacitance Change (%)
The data herein are given in typical values, not guaranteed ratings.
-60
-50
-40
-30
-20
-10
0
10
20
30
AC Voltage (Vr.m.s.)
High Dielectric Constant Type: GRM155R61A105KE15
Measuring condition: 1kHz
Capacitance Change (%)
0.0 0.5 1.0 1.5 2.0 2.5
Please refer to our Web site or contact our sales representatives for individual Part Number's data.
Our Web Site: http://www.murata.com/products/capacitor/tech_data/
GRM Series Data
63
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
64
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Chip Monolithic Ceramic Capacitors
Capacitor Array GNM Series
Features
1. High density mounting due to mounting space saving
2. Mounting cost saving
Applications
General electronic equipment
LW
T
P
GNM214/314
Part Number Dimensions (mm)
GNM214
GNM314
L
2.0 ±0.15
3.2 ±0.15
P
0.5 ±0.05
0.8 ±0.1
T
0.5 +0.05/-0.1
0.6 ±0.1
0.85 ±0.1
0.8 ±0.1
0.85 ±0.1
1.0 ±0.1
1.15 ±0.1
W
1.25 ±0.15
1.6 ±0.15
LW
T
P
GNM0M2/1M2/212
Part Number L
GNM0M2 0.9 ±0.05 P
0.45 ±0.05
T
Dimensions (mm)
0.45 ±0.05
W
0.6 ±0.05
GNM1M2 1.37 ±0.15 0.64 ±0.05
0.5 +0.05/-0.10
1.0 ±0.15 0.6 ±0.1
0.8 +0/-0.15
GNM212 2.0 ±0.15 1.0 ±0.1
0.6 ±0.1
1.25 ±0.15 0.85 ±0.1
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
65
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Capacitance Table
Temperature Compensating Type C0G(5C) Characteristics
1.37x1.0
(1M)
<0504>
50
(1H)
2.0x1.25
(21)
<0805>
50
(1H)
3.2x1.6
(31)
<1206>
100
(2A)50
(1H)
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
2(2)4(4)
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.6 ex.0.6: T Dimension [mm]
LxW
[mm]
Rated Voltage
[Vdc]
Capacitance
10pF(100)
15pF(150)
22pF(220)
33pF(330)
47pF(470)
68pF(680)
100pF(101)
150pF(151)
220pF(221)
330pF(331)
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
Number of Elements
High Dielectric Constant Type X7R(R7)/X7S(C7) Characteristics
50
(1H)
0.6
25
(1E)
0.6
0.6
0.6
1.37x1.0
(1M)
<0504>
16
(1C)
0.6
0.6
0.6
0.6
0.6
0.6
10
(1A)50
(1H)
0.6
0.6
2.0x1.25
(21)
<0805>
25
(1E)
0.6
0.6
0.6
16
(1C)
0.85
0.85
0.85
50
(1H)
0.85
0.85
2(2)4(4)
3.2x1.6
(31)
<1206>
25
(1E)
0.85
16
(1C)
1.0
1.0
6.3
(0J)
1.15
0.6 ex.0.6: T Dimension [mm]
LxW
[mm]
Rated Voltage
[Vdc]
Capacitance
Number of Elements
470pF(471)
1000pF(102)
2200pF(222)
4700pF(472)
10000pF(103)
22000pF(223)
47000pF(473)
0.10µF(104)
1.0µF(105)
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
High Dielectric Constant Type X7R(R7) Characteristics-Low Profile
16
(1C)
0.5
16
(1C)
0.5
1.37x1.0
(1M)
<0504>
2.0x1.25
(21)
<0805>
2(2)4(4)
0.5 ex.0.5: T Dimension [mm]
LxW
[mm]
Rated Voltage
[Vdc]
Capacitance
Number of Elements
0.10µF(104)
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Capacitance Table
66
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
High Dielectric Constant Type X5R(R6) Characteristics
16
(1C)
0.45
0.45
0.45
0.45
10
(1A)
0.45
0.45
0.45
0.45
0.9x0.6
(0M)
<0302>
1.37x1.0
(1M)
<0504>
6.3
(0J)
0.45
0.45
0.45
0.45
0.45
4
(0G)50
(1H)
0.6
25
(1E)
0.6
0.6
0.6
2.0x1.25
(21)
<0805>
2.0x1.25
(21)
<0805>
16
(1C)10
(1A)
0.6
0.6
0.6
0.8
0.8
6.3
(0J)
0.8
0.8
2(2)4(4)
3.2x1.6
(31)
<1206>
16
(1C)
0.85
0.85
10
(1A)
0.85
0.85
6.3
(0J)10
(1A)6.3
(0J)16
(1C)10
(1A)
0.85
0.85 0.85 0.85
0.6 ex.0.6: T Dimension [mm]
LxW
[mm]
Rated Voltage
[Vdc]
Capacitance
Number of Elements
1000pF(102)
2200pF(222)
4700pF(472)
10000pF(103)
22000pF(223)
47000pF(473)
0.10µF(104)
0.22µF(224)
0.47µF(474)
1.0µF(105)
2.2µF(225)
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
0.6
0.6
0.8
0.8 0.85
0.85
High Dielectric Constant Type X5R(R6) Characteristics-Low Profile
16
(1C)10
(1A)
0.5
10
(1A)
0.5 0.5
1.37x1.0
(1M)
<0504>
2.0x1.25
(21)
<0805>
2(2)4(4)
0.5 ex.0.5: T Dimension [mm]
LxW
[mm]
Rated Voltage
[Vdc]
Capacitance
Number of Elements
1.0µF(105)
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
67
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
50(1H) 50(1H) 100(2A) 50(1H)
GNM1M25C1H100KD01D
GNM1M25C1H150KD01D
GNM1M25C1H220KD01D
GNM1M25C1H330KD01D
GNM1M25C1H470KD01D
GNM1M25C1H680KD01D
GNM1M25C1H101KD01D
GNM1M25C1H151KD01D
GNM1M25C1H221KD01D
GNM2145C1H100KD01D
GNM2145C1H150KD01D
GNM2145C1H220KD01D
GNM2145C1H330KD01D
GNM2145C1H470KD01D
GNM2145C1H680KD01D
GNM2145C1H101KD01D
GNM2145C1H151KD01D
GNM2145C1H221KD01D
GNM3145C2A100KD01D
GNM3145C2A150KD01D
GNM3145C2A220KD01D
GNM3145C2A330KD01D
GNM3145C2A470KD01D
GNM3145C2A680KD01D
GNM3145C2A101KD01D
GNM3145C2A151KD01D
GNM3145C1H100KD01D
GNM3145C1H150KD01D
GNM3145C1H220KD01D
GNM3145C1H330KD01D
GNM3145C1H470KD01D
GNM3145C1H680KD01D
GNM3145C1H101KD01D
GNM3145C1H151KD01D
GNM3145C1H221KD01D
GNM3145C1H331KD01D
1.37x1.0(1M)<0504> 2.0x1.25(21)<0805>
Number of Elements 2(2)4(4)
3.2x1.6(31)<1206>
10pF(100)
15pF(150)
22pF(220)
33pF(330)
47pF(470)
68pF(680)
100pF(101)
150pF(151)
220pF(221)
330pF(331)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
Temperature Compensating Type C0G(5C) Characteristics
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
50(1H)
Number of Elements 2(2)
25(1E) 16(1C)
GNM1M2R71H102MA01D
GNM1M2R71E222MA01D
GNM1M2R71E472MA01D
GNM1M2R71E103MA01D
GNM1M2R71C223MA01D
GNM1M2R71C473MA01D
GNM1M2R71C104MA01D
1.37x1.0(1M)<0504>
1000pF(102)
2200pF(222)
4700pF(472)
10000pF(103)
22000pF(223)
47000pF(473)
0.10µF(104)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
50(1H)
Number of Elements 4(4)
25(1E) 16(1C)
GNM214R71H471MA01D
GNM214R71H102MA01D
GNM214R71E222MA01D
GNM214R71E472MA01D
GNM214R71E103MA01D
GNM214R71C223MA01D
GNM214R71C473MA01D
GNM214R71C104MA01D
2.0x1.25(21)<0805>
470pF(471)
1000pF(102)
2200pF(222)
4700pF(472)
10000pF(103)
22000pF(223)
47000pF(473)
0.10µF(104)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
10(1A)
GNM1M2R71A223MA01D
GNM1M2R71A473MA01D
GNM1M2C71A104MA01D
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
50(1H)
Number of Elements 4(4)
25(1E) 16(1C) 6.3(0J)
GNM314R71H473MA11D
GNM314R71H104MA11D GNM314R71E104MA11D
GNM314R71C473MA01L
GNM314R71C104MA01L
GNM314R70J105MA01L
3.2x1.6(31)<1206>
47000pF(473)
0.10µF(104)
1.0µF(105)
±20%(M)
±20%(M)
±20%(M)
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
* Please refer to GNM series Specifications and Test Method (2).
High Dielectric Constant Type X7R(R7)/X7S(C7) Characteristics
GN M 1M 2 5C 1H 100 K D01 D
Packaging Code in Part Number shows STD 180mm Reel Taping.
qProduct ID wSeries eDimensions (LxW) rNumber of Elements
tTemperature Characteristics yRated Voltage uCapacitance
iCapacitance Tolerance oIndividual Specification Code !0Packaging
(Part Number)
wq e r t y u i o !0
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
68
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
* Please refer to GNM series Specifications and Test Method (2).
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
LxW [mm]
Rated Volt. [Vdc]
Number of Elements
Capacitance Tolerance Part Number
16(1C) 10(1A) 6.3(0J)4(0G)
GNM0M2R61C103ME18D*
GNM0M2R61C223ME18D*
GNM0M2R61C473ME18D*
GNM0M2R61C104ME18D*
GNM0M2R61A103ME17D*
GNM0M2R61A223ME17D*
GNM0M2R61A473ME17D*
GNM0M2R61A104ME17D*
GNM0M2R60J103ME17D*
GNM0M2R60J223ME17D*
GNM0M2R60J473ME17D*
GNM0M2R60J104ME17D*
GNM0M2R60G105ME17D*
2(2)
0.9x0.6(0M)<0302>
10000pF(103)
22000pF(223)
47000pF(473)
0.10µF(104)
1.0µF(105)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
LxW [mm]
Rated Volt. [Vdc]
Number of Elements
Capacitance Tolerance Part Number
10(1A) 6.3(0J)
GNM1M2R61A223MA01D
GNM1M2R61A473MA01D
GNM1M2R61A104MA01D
GNM1M2R61A105ME17D*
GNM1M2R61A225ME18D*
GNM1M2R60J105ME12D*
GNM1M2R60J225ME18D*
1.37x1.0(1M)<0504>
2(2)
22000pF(223)
47000pF(473)
0.10µF(104)
1.0µF(105)
2.2µF(225)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
LxW [mm]
Rated Volt. [Vdc]
Number of Elements
Capacitance Tolerance Part Number
16(1C) 10(1A) 6.3(0J)
GNM212R61C474MA16D
GNM212R61C105MA16D GNM212R61A105MA13D
GNM212R61A225ME16D* GNM212R60J225ME16D*
2.0x1.25(21)<0805>
2(2)
0.47µF(474)
1.0µF(105)
2.2µF(225)
±20%(M)
±20%(M)
±20%(M)
LxW [mm]
Rated Volt. [Vdc]
Number of Elements
Capacitance Tolerance Part Number
50(1H) 25(1E) 16(1C)
GNM1M2R61H102MA01D
GNM1M2R61E222MA01D
GNM1M2R61E472MA01D
GNM1M2R61E103MA01D
GNM1M2R61C223MA01D
GNM1M2R61C473MA01D
GNM1M2R61C224ME18D*
GNM1M2R61C105ME18D*
1.37x1.0(1M)<0504>
2(2)
1000pF(102)
2200pF(222)
4700pF(472)
10000pF(103)
22000pF(223)
47000pF(473)
0.22µF(224)
1.0µF(105)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
High Dielectric Constant Type X5R(R6) Characteristics
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
16(1C) 16(1C)
GNM1M2R71C104MAA1D GNM214R71C104MAA1D
1.37x1.0(1M)<0504>
Number of Elements 2(2)2.0x1.25(21)<0805>
4(4)
0.10µF(104)±20%(M)
High Dielectric Constant Type X7R(R7) Characteristics-Low Profile
GN M 1M 2 R7 1C 104 M AA1 D
Packaging Code in Part Number shows STD 180mm Reel Taping.
qProduct ID wSeries eDimensions (LxW) rNumber of Elements
tTemperature Characteristics yRated Voltage uCapacitance
iCapacitance Tolerance oIndividual Specification Code !0Packaging
(Part Number)
wq e r t y u i o !0
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
69
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
* Please refer to GNM series Specifications and Test Method (2).
LxW [mm]
Number of Elements
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
10(1A) 6.3(0J)
2.0x1.25(21)<0805>
4(4)
1.0µF(105)
2.2µF(225)
±20%(M)
±20%(M)
LxW [mm]
Number of Elements
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
16(1C) 10(1A)
GNM314R61C105MA15D
GNM214R61A105ME17D* GNM214R60J105ME17D*
GNM214R60J225ME18D*
GNM314R61A105MA13D
3.2x1.6(31)<1206>
4(4)
1.0µF(105)±20%(M)
High Dielectric Constant Type X5R(R6) Characteristics
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
16(1C) 10(1A)
GNM1M2R61C105MEA2D* GNM1M2R61A105MEA4D*
1.37x1.0(1M)<0504>
Number of Elements 2(2)10(1A)
GNM214R61A105MEA2D*
2.0x1.25(21)<0805>
4(4)
1.0µF(105)±20%(M)
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
* Please refer to GNM series Specifications and Test Method (2).
High Dielectric Constant Type X5R(R6) Characteristics-Low Profile
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Continued on the following page.
GNM Series Specifications and Test Methods (1)
Solder the capacitor to the test jig (glass epoxy board) shown in
Fig.1 using a eutectic solder. Then apply 5N force in parallel with
the test jig for 10±1 sec.
The soldering should be done either with an iron or using the
reflow method and should be conducted with care so that the
soldering is uniform and free of defects such as heat shock.
(in mm)
Fig. 1
10 Adhesive Strength
of Termination
No removal of the terminations or other defect should occur.
GNMpp4 GNMpp2
The capacitance change should be measured after 5 min. at
each specified temperature stage.
(1) Temperature Compensating Type
The temperature coefficient is determined using the capaci-
tance measured in step 3 as a reference. When cycling the
temperature sequentially from steps 1 through 5, the
capacitance should be within the specified tolerance for the
temperature coefficient and capacitance change as in Table A.
The capacitance drift is calculated by dividing the differences
between the maximum and minimum measured values in the
steps 1, 3 and 5 by the cap. value in step 3.
(2) High Dielectric Constant Type
The ranges of capacitance change compared with the above
25°C value over the temperature ranges shown in the table
should be within the specified ranges.
9
Capacitance
Temperature
Characteristics
Capacitance
Change
Within the
specified tolerance
(Table A)
Temperature
Coefficient
Within the
specified tolerance
(Table A)
Capacitance
Drift
Within ±0.2%
or ±0.05pF
(whichever is
larger.)
8Q/
Dissipation Factor
(D.F.)
30pF min.: QU1000
30pF max.:
QU400+20C
C: Nominal
Capacitance (pF)
The capacitance/Q/D.F. should be measured at 25°C at the
frequency and voltage shown in the table.
7 Capacitance Within the specified tolerance
The insulation resistance should be measured with a DC
voltage not exceeding the rated voltage at 25°C and 75%RH
max. and within 2 minutes of charging.
6Insulation
Resistance More than 10,000M or 500 · F
(whichever is smaller)
No failure should be observed when 300% of the rated voltage
(5C) or 250% of the rated voltage (R7) is applied between the
terminations for 1 to 5 seconds, provided the charge/discharge
current is less than 50mA.
5 Dielectric Strength No defects or abnormalities
Using calipers4 Dimensions Within the specified dimensions
Visual inspection3 Appearance No defects or abnormalities
The rated voltage is defined as the maximum voltage that may
be applied continuously to the capacitor.
When AC voltage is superimposed on DC voltage, VP-P or VO-P,
whichever is larger, should be maintained within the rated
voltage range.
2 Rated Voltage See the previous pages.
1Operating
Temperature
Range 5C: –55 to +125°CR7, C7: –55 to +125°C
R6: –55 to +85°C
No. Test Method
Specifications
Temperature
Compensating Type
High Dielectric Type
Item
Step Temperature (°C)
25±2
–55±3 (for 5C/R7/C7), –30±3 (for F5)
25±2
125±3 (for 5C/R7/C7), 85±3 (for F5)
25±2
1
2
3
4
5
Char.
Item 5C
1±0.1MHz
0.5 to 5Vrms
R7
1±0.1kHz
1.0±0.2Vrms
Frequency
Voltage
Char.
25V min.
0.025
max.
16V
0.035
max.
10V
0.035
max.
6.3V
0.05
max.
R7, R6,
C7
Char. Temp.
Range
–55°C
to +125°C
Reference
Temp.
25°C
Cap.
Change
Within
±15%
R7
–55°C
to +85°CWithin
±22%
R6
–55°C
to +125°C
C7
Type a
0.5
0.6
0.6
0.8
b
1.6
1.8
2.0
2.5
c
0.32
0.5
0.25
0.4
d
0.32
0.5
0.25
0.4
GNM1M2
GNM212
GNM214
GNM314
Solder resist
Copper foil
c
d
b b
aa
c
d
Solder resist
Copper foil
• Initial measurement for high dielectric constant type.
Perform a heat treatment at 150+0/-10°C for one hour and
then set for 24±2 hours at room temperature.
Perform the initial measurement.
!Note 1. This Specifications and Test Methods is downloaded from the website of Murata Manufacturing co.,ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice.
0. Please check with our sales representatives or product engineers before ordering.
2. This Specifications and Test Methods has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product
0. specifications before ordering.
GNM Series Specifications and Test Methods (1)
70
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
When no "*" is added in PNs table, please refer to GNM Series Specifications and Test Methods (1).
When "*" is added in PNs table, please refer to GNM Series Specifications and Test Methods (2).
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Continued from the preceding page.
Continued on the following page.
Preheat the capacitor at 120 to 150°C for 1 minute. Immerse
the capacitor in a eutectic solder or Sn-3.0Ag-0.5Cu solder
solution at 270±5°C for 10±0.5 seconds. Let sit at room
temperature for 24±2 hours, then measure.
• Initial measurement for high dielectric constant type
Perform a heat treatment at 150+0/-10°C for one hour and
then let sit for 24±2 hours at room temperature.
Perform the initial measurement.
14
Resistance to
Soldering Heat The measured and observed characteristics should satisfy the
specifications in the following table.
Appearance
No marking defects
Capacitance
Change
Within ±2.5%
or ±0.25pF
(whichever is
larger)
R7, R6, C7: Within ±7.5%
Q/D.F.
30pF min.: QU1000
30pF max.:
QU400+20C
C: Nominal
Capacitance (pF)
I.R. More than 10,000M or 500 · F (whichever is smaller)
Dielectric
Strength
No failure
Immerse the capacitor in a solution of ethanol (JIS-K-8101) and
rosin (JIS-K-5902) (25% rosin in weight proportion). Preheat at
80 to 120°C for 10 to 30 seconds. After preheating, immerse in
eutectic solder solution for 2±0.5 seconds at 230±5°C or
Sn-3.0Ag-0.5Cu solder solution for 2±0.5 seconds at 245±5°C.
13 Solderability of
Termination 75% of the terminations are to be soldered evenly and
continuously.
GNM Series Specifications and Test Methods (1)
Char.
25V min.
0.025
max.
16V
0.035
max.
10V
0.035
max.
6.3V
0.05
max.
R7, R6,
C7
Char.
25V min.
0.025
max.
16V
0.035
max.
10V
0.035
max.
6.3V
0.05
max.
R7, R6,
C7
Type a
2.0±0.05
2.0±0.05
2.0±0.05
2.5±0.05
b
0.5±0.05
0.6±0.05
0.7±0.05
0.8±0.05
c
0.32±0.05
0.5±0.05
0.3±0.05
0.4±0.05
d
0.32±0.05
0.5±0.05
0.2±0.05
0.4±0.05
GNM1M2
GNM212
GNM214
GNM314
Solder the capacitor on the test jig (glass epoxy board) shown
in Fig. 2 using a eutectic solder.
Then apply a force in the direction shown in Fig. 3 for 5±1 sec.
The soldering should be done by the reflow method and should
be conducted with care so that the soldering is uniform and free
of defects such as heat shock.
Fig. 3
12 Deflection
Appearance
No marking defects
Capacitance
Change
Within ±5% or ±0.5pF
(whichever is larger) Within ±10%
(in mm)
Fig. 2
•GNMpp4 •GNMpp2
Solder the capacitor to the test jig (glass epoxy board) in the
same manner and under the same conditions as (10). The
capacitor should be subjected to a simple harmonic motion
having a total amplitude of 1.5mm, the frequency being varied
uniformly between the approximate limits of 10 and 55Hz. The
frequency range, from 10 to 55Hz and return to 10Hz, should
be traversed in approximately 1 minute. This motion should be
applied for a period of 2 hours in each of 3 mutually perpendic-
ular directions (total of 6 hours).
11
Vibration
Resistance
Appearance
No defects or abnormalities
Capacitance
Within the specified tolerance
Q/D.F.
30pF min.: QU1000
30pF max.:
QU400+20C
C: Nominal
Capacitance (pF)
No. Test Method
Specifications
Temperature
Compensating Type
High Dielectric Type
Item
100
1.0
5.0
b
a
40
c
d
100
1.0
t=0.8mm
5.0
b
a
40
c
d
Capacitance meter
Flexure : V1
20 50
R230
Pressurizing
speed: 1.0mm/sec.
Pressurize
45 45
!Note 1. This Specifications and Test Methods is downloaded from the website of Murata Manufacturing co.,ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice.
0. Please check with our sales representatives or product engineers before ordering.
2. This Specifications and Test Methods has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product
0. specifications before ordering.
GNM Series Specifications and Test Methods (1)
71
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
When no "*" is added in PNs table, please refer to GNM Series Specifications and Test Methods (1).
When "*" is added in PNs table, please refer to GNM Series Specifications and Test Methods (2).
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Continued from the preceding page.
Continued on the following page.
Apply the rated voltage at 40±2°C and 90 to 95% humidity for
500±12 hours.
Remove and let sit for 24±2 hours at room temperature, then
measure.
The charge/discharge current is less than 50mA.
17
Humidity Load The measured and observed characteristics should satisfy the
specifications in the following table.
Appearance
No marking defects
Capacitance
Change
Within ±7.5%
or ±0.75pF
(whichever is
larger)
R7, R6, C7: Within ±12.5%
Q/D.F.
30pF and over:
QU200
30pF and below:
QU100+10C/3
C: Nominal
Capacitance (pF)
I.R. More than 500M or 25 · F (whichever is smaller)
Set the capacitor at 40±2°C and 90 to 95% humidity for 500±12
hours.
Remove and let sit for 24±2 hours at room temperature, then
measure.
16
Humidity Steady
State The measured and observed characteristics should satisfy the
specifications in the following table.
Appearance
No marking defects
Capacitance
Change
Within ±5%
or ±0.5pF
(whichever is
larger)
R7, R6, C7: Within ±12.5%
Q/D.F.
30pF and over:
QU350
10pF and over,
30pF and below:
QU275+5C/2
10pF and below:
QU200+10C
C: Nominal
Capacitance (pF)
I.R. More than 1,000M or 50 · F (whichever is smaller)
Fix the capacitor to the supporting jig in the same manner and
under the same conditions as (10). Perform the five cycles
according to the four heat treatments listed in the following
table. Let sit for 24±2 hours (temperature compensating type)
or 48±4 hours (high dielectric constant type) at room
temperature, then measure.
• Initial measurement for high dielectric constant type
Perform a heat treatment at 150+0/-10°C for one hour and
then let sit for 24±2 hours at room temperature.
Perform the initial measurement.
15
Temperature
Cycle The measured and observed characteristics should satisfy the
specifications in the following table.
Appearance
No marking defects
Capacitance
Change
Within ±2.5%
or ±0.25pF
(whichever is
larger)
R7, R6, C7: Within ±7.5%
Q/D.F.
30pF min.: QU1000
30pF max.:
QU400+20C
C:Nominal
Capacitance (pF)
I.R. More than 10,000M or 500 · F (whichever is smaller)
Dielectric
Strength
No failure
GNM Series Specifications and Test Methods (1)
Step
Temp. (°C)
Time (min.)
1
Min.
Operating
Temp.+0/–3
30±3
2
Room
Temp.
2 to 3
3
Max.
Operating
Temp. +3/–0
30±3
4
Room
Temp.
2 to 3
Char.
25V min.
0.025
max.
16V
0.035
max.
10V
0.035
max.
6.3V
0.05
max.
R7, R6,
C7
Char. 25V min.
0.05
max.
16V
0.05
max.
10V/6.3V
0.05
max.
R7, R6,
C7
Char. 25V min.
0.05
max.
16V
0.05
max.
10V/6.3V
0.05
max.
R7, R6,
C7
No. Test Method
Specifications
Temperature
Compensating Type
High Dielectric Type
Item
!Note 1. This Specifications and Test Methods is downloaded from the website of Murata Manufacturing co.,ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice.
0. Please check with our sales representatives or product engineers before ordering.
2. This Specifications and Test Methods has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product
0. specifications before ordering.
GNM Series Specifications and Test Methods (1)
72
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
When no "*" is added in PNs table, please refer to GNM Series Specifications and Test Methods (1).
When "*" is added in PNs table, please refer to GNM Series Specifications and Test Methods (2).
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Continued from the preceding page.
Apply 200% of the rated voltage for 1000±12 hours at the
maximum operating temperature ±3°C. Let sit for 24±2 hours
at room temperature, then measure.
The charge/discharge current is less than 50mA.
• Initial measurement for high dielectric constant type.
Apply 200% of the rated DC voltage for one hour at the
maximum operating temperature ±3°C. Remove and let sit for
24±2 hours at room temperature. Perform initial
measurement.
18
High Temperature
Load The measured and observed characteristics should satisfy the
specifications in the following table.
Appearance
No marking defects
Capacitance
Change
Within ±3%
or ±0.3pF
(whichever is
larger)
R7, R6, C7: Within ±12.5%
Q/D.F.
30pF and over:
QU350
10pF and over,
30pF and below:
QU275+5C/2
10pF and below:
QU200+10C
C: Nominal
Capacitance (pF)
I.R. More than 1,000M or 50 · F (whichever is smaller)
No. Test Method
Specifications
Temperature
Compensating Type
High Dielectric Type
Item
Char. Nominal Values
(ppm/°C) *1
0±305C Max.
0.58 Min.
–0.24 Max.
0.40 Min.
–0.17 Max.
–55°CCapacitance Change from 25°C (%)
–30°C –10°C
0.25 Min.
–0.11
*1: Nominal values denote the temperature coefficient within a range of 25 to 125°C.
Table A
GNM Series Specifications and Test Methods (1)
Char. 25V min.
0.04
max.
16V
0.05
max.
10V/6.3V
0.05
max.
R7, R6,
C7
!Note 1. This Specifications and Test Methods is downloaded from the website of Murata Manufacturing co.,ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice.
0. Please check with our sales representatives or product engineers before ordering.
2. This Specifications and Test Methods has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product
0. specifications before ordering.
GNM Series Specifications and Test Methods (1)
73
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
When no "*" is added in PNs table, please refer to GNM Series Specifications and Test Methods (1).
When "*" is added in PNs table, please refer to GNM Series Specifications and Test Methods (2).
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Solder the capacitor to the test jig (glass epoxy board) in
the same manner and under the same conditions as (10).
The capacitor should be subjected to a simple harmonic motion
having a total amplitude of 1.5mm, the frequency being varied
uniformly between the approximate limits of 10 and 55Hz.
The frequency range, from 10 to 55Hz and return to 10Hz,
should be traversed in approximately 1 minute. This motion
should be applied for a period of 2 hours in each of 3 mutually
perpendicular directions (total of 6 hours).
11
Vibration
Appearance
No defects or abnormalities
Capacitance
Within the specified tolerance
D.F. 0.1 max.*3
*3 However 0.125 max. for Table 3 items.
Continued on the following page.
Temperature (°C)Step 25±2
–55±3
25±2
85±3
25±2
1
2
3
4
5
Temp. RangeChar.
–55 to +85°C
Reference
Temp.
25°C
Cap. Change
Within ±15%R6
aType 0.2
0.5
0.6
0.6
0.8
b
0.96
1.6
1.8
2.0
2.5
c
0.25
0.32
0.5
0.25
0.4
d
0.2
0.32
0.5
0.25
0.4
GNM0M2
GNM1M2
GNM212
GNM214
GNM314
Solder the capacitor to the test jig (glass epoxy board) shown in
Fig. 1 using a eutectic solder.
Then apply 5N (GNM0M2: 2N) force in parallel with the test jig for
10±1 sec. The soldering should be done either with an iron or
using the reflow method and should be conducted with care so that
the soldering is uniform and free of defects such as heat shock.
(in mm)
10 Adhesive Strength
of Termination
No removal of the terminations or other defects should occur.
The capacitance change should be measured after 5 min.at
each specified temperature stage.
The ranges of capacitance change compared with the 25°C
value over the temperature ranges shown in the table should be
within the specified ranges.
• Initial measurement for high dielectric constant type.
Perform a heat treatment at 150+0/-10°C for one hour and
then set for 24±2 hours at room temperature.
Perform the initial measurement.
9Capacitance
Temperature
Characteristics
8Dissipation Factor
(D.F.)
0.1 max.*3
Table 3
*3 However 0.125 max. for Table 3 items.
The capacitance/D.F. should be measured at 25°C at the
frequency and voltage shown in the table.
Table 1
Table 2
7 Capacitance Within the specified tolerance
The insulation resistance should be measured with a DC
voltage not exceeding the rated voltage at 25°C and 75%RH
max. and within 1 minute of charging.
6
Insulation Resistance
50 · F min.
No failure should be observed when 250% of the rated voltage
is applied between the terminations for 1 to 5 seconds,
provided the charge/discharge current is less than 50mA.
5 Dielectric Strength No defects or abnormalities
Using calipers4 Dimensions Within the specified dimension
Visual inspection3 Appearance No defects or abnormalities
The rated voltage is defined as the maximum voltage that may
be applied continuously to the capacitor.
When AC voltage is superimposed on DC voltage, VP-P or VO-P,
whichever is larger, should be maintained within the rated
voltage range.
2 Rated Voltage See the previous pages.
1
Operating
Temperature Range
R6: –55°C to +85°C
Measuring Frequency
Nominal Capacitance 1±0.1kHz
1±0.1kHz
1±0.1kHz
1±0.1kHz
Measuring Voltage
1.0±0.2Vrms
0.5±0.1Vrms
0.5±0.1Vrms
1.0±0.1Vrms
CV10µF *1 (10V min.)
CV10µF *2 (6.3V max.)
*1For items in Table1
*2For items in Table2
GNM Series Specifications and Test Methods (2)
a
Solder resist
Copper foil
c
d
b b
a
c
d
Solder resist
Copper foil
No. Test MethodSpecificationsItem
Fig. 1
GNMpp4 GNMpp2
GNM0M2 R6 1A 104
GNM0M2 R6 1C 104
GNM1M2 R6 1A 105/225
GNM1M2 R6 1C 224/105
GNM0M2 R6 0J 103/223/473
GNM212 R6 0J 225
GNM214 R6 0J 105
GNM0M2 R6 103/223/473/104
GNM1M2 R6 0J 105/225
GNM1M2 R6 1A 105MEA4
GNM1M2 R6 1A 225
GNM212 R6 0J 225
GNM212 R6 1A 225
GNM214 R6 0J 225
!Note 1. This Specifications and Test Methods is downloaded from the website of Murata Manufacturing co.,ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice.
0. Please check with our sales representatives or product engineers before ordering.
2. This Specifications and Test Methods has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product
0. specifications before ordering.
GNM Series Specifications and Test Methods (2)
74
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
When no "*" is added in PNs table, please refer to GNM Series Specifications and Test Methods (1).
When "*" is added in PNs table, please refer to GNM Series Specifications and Test Methods (2).
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Continued from the preceding page.
GNM Series Specifications and Test Methods (2)
100
1.0
5.0
b
a
40
c
d
100
1.0
5.0
b
a
40
c
d
Capacitance meter
Flexure : V1
20 50
R230
Pressurizing
speed: 1.0mm/sec.
Pressurize
45 45
Apply 150% (GNM1M2R61A225/1C105: 125% of the rated
voltage) of the rated voltage for 1000±12 hours at the
maximum operating temperature ±3°C. Let sit for 24±2 hours
at room temperature, then measure.
The charge/discharge current is less than 50mA.
• Initial measurement
Perform a heat treatment at 150 +0/-10°C for one hour
and then let sit for 24±2 hours at room temperature.
Perform the initial measurement.
• Measurement after test
Perform a heat treatment at 150 +0/-10°C for one hour and
then let sit for 24±2 hours at room temperature, then measure.
17
Durability
Appearance
No marking defects
Capacitance
Change
R6: Within ±12.5%
D.F. 0.2 max.
I.R. 25 · F min.
Apply the rated voltage at 40±2°C and 90 to 95% humidity for
500±12 hours. The charge/discharge current is less than 50mA.
• Initial measurement
Perform a heat treatment at 150 +0/-10°C for one hour
and then let sit for 24±2 hours at room temperature.
Perform the initial measurement.
• Measurement after test
Perform a heat treatment at 150 +0/-10°C for one hour
and then let sit for 24±2 hours at room temperature, then
measure.
16
High
Temperature
High
Humidity
(Steady)
Appearance
No marking defects
Capacitance
Change
R6: Within ±12.5%
D.F. 0.2 max.
I.R. 12.5 · F min.
Fix the capacitor to the supporting jig in the same manner and
under the same conditions as (10).
Perform the five cycles according to the four heat treatments
listed in the following table.
Let sit for 24±2 hours at room temperature, then measure.
• Initial measurement
Perform a heat treatment at 150 +0/-10 °C for one hour and
then let sit for 24±2 hours at room temperature.
Perform the initial measurement.
15
Temperature
Cycle
Appearance
No marking defects
Capacitance
Change
R6*5: Within ±12.5%
*5 GNM0M2R60G105, GNM0M2R60J103/223/473/104,
GNM0M2R61A103/223/473/104,
GNM0M2R61C103/223/473/104, GNM1M2R61A105:
Within ±15%
D.F. 0.1 max. *3
*3 However 0.125 max. for Table 3 items.
I.R. 50 · F min.
Dielectric
Strength
No failure
Preheat the capacitor at 120 to 150°C for 1 minute. Immerse
the capacitor in a eutectic solder or Sn-3.0Ag-0.5Cu solder
solution at 270±5°C for 10±0.5 seconds.
Let sit at room temperature for 24±2 hours, then measure.
• Initial measurement
Perform a heat treatment at 150 +0/-10°C for one hour and
then let sit for 24±2 hours at room temperature. Perform
the initial measurement.
14
Resistance
to Soldering
Heat
Appearance
No marking defects
Capacitance
Change
R6*4: Within ±7.5%
*4 GNM0M2R60G105: Within +15/-7.5%
D.F. 0.1 max. *3
*3 However 0.125 max. for Table 3 items.
I.R. 50 · F min.
Dielectric
Strength
No failure
Immerse the capacitor in a solution of ethanol (JIS-K-8101) and
rosin (JIS-K-5902) (25% rosin in weight proportion). Preheat at
80 to 120°C for 10 to 30 seconds. After preheating, immerse in
eutectic solder solution for 2±0.5 seconds at 230±5°C or
Sn-3.0Ag-0.5Cu solder solution for 2±0.5 seconds at 245±5°C.
13 Solderability of
Termination 75% of the terminations are to be soldered evenly
and continuously.
Solder the capacitor to the test jig (glass epoxy board) shown in
Fig. 2 using a eutectic solder. Then apply a force in the
direction shown in Fig. 3. The soldering should be done by the
reflow method and should be conducted with care so that the
soldering is uniform and free of defects such as heat shock.
12 Deflection
Appearance
No marking defects
Capacitance
Change
Within ±10%
No. Test MethodSpecificationsItem
Fig. 3
Fig. 2
Thickness: 0.8mm
#GNMpp4#GNMpp2
1Step
Min. Operating
Temp.
30±3
2
Room
Temp.
2 to 3
3
Min. Operating
Temp.
30±3
4
Room
Temp.
2 to 3
Temp. (°C)
Time (min.)
aType 2.0±0.05
2.0±0.05
2.0±0.05
2.0±0.05
2.5±0.05
b
0.2±0.05
0.5±0.05
0.6±0.05
0.7±0.05
0.8±0.05
c
0.2±0.05
0.32±0.05
0.5±0.05
0.3±0.05
0.4±0.05
d
0.25±0.05
0.32±0.05
0.5±0.05
0.2±0.05
0.4±0.05
GNM0M2
GNM1M2
GNM212
GNM214
GNM314 (in mm)
!Note 1. This Specifications and Test Methods is downloaded from the website of Murata Manufacturing co.,ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice.
0. Please check with our sales representatives or product engineers before ordering.
2. This Specifications and Test Methods has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product
0. specifications before ordering.
GNM Series Specifications and Test Methods (2)
75
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
When no "*" is added in PNs table, please refer to GNM Series Specifications and Test Methods (1).
When "*" is added in PNs table, please refer to GNM Series Specifications and Test Methods (2).
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
76
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Chip Monolithic Ceramic Capacitors
Low ESL LLL/LLR/LLA/LLM Series
Features
1. Low ESL, good for noise reduction for high
frequency
2. Small, high cap
Applications
Decoupling solution for "chip sets", such as
Mobile/FPD TV
Features
1. Good solution for anti resonance reduction with
Controlled ESR.
2. Suitable for high speed IC decoupling due to low
inductance type.
3. 4 types of ESR are available.
Applications
1. All kind of IC package (network processor,
media processor, etc)
2. Circuit that has anti-resonance
Part Number T
Dimensions (mm)
0.6 max.
0.85 ±0.1
0.7 ±0.1
W
0.8 ±0.1
1.25 ±0.1
1.6 ±0.15
L
1.6 ±0.1
2.0 ±0.1
3.2 ±0.15 1.15 ±0.1
0.6 ±0.1
LLL185 0.3 ±0.050.5 ±0.05 1.0 ±0.05
LLL153
0.5 +0.05/-0.10.8 ±0.15 1.6 ±0.15
LLR185
LLL216 0.5 +0/-0.15
LLL215
LLL219
LLL317 0.5 +0/-0.15
LLL315
LLL31M
LW
T
Features
1. Low ESL (100pH), suitable to decoupling capacitor
for 1GHz clock speed IC.
2. Small, high cap
Applications
High speed IC package (FPGA, network processor, etc)
Part Number LW T
Dimensions (mm) P
1.6 ±0.1 0.8 ±0.1 0.4 ±0.10.5 +0.05/-0.1
LLA185 2.0 ±0.1 1.25 ±0.1 0.5 ±0.050.5 +0.05/-0.1
LLA215 2.0 ±0.1 1.25 ±0.1 0.5 ±0.050.85 ±0.1
LLA219 3.2 ±0.15 1.6 ±0.15 0.8 ±0.10.5 +0.05/-0.1
LLA315 3.2 ±0.15 1.6 ±0.15 0.8 ±0.10.85 ±0.1
LLA319 3.2 ±0.15 1.6 ±0.15 0.8 ±0.11.15 ±0.1
LLA31M
LW
Equivalent Circuit
T
P
qwer
qetu
wryi
iuyt
Features
1. Low ESL (45pH), suitable to decoupling capacitor
for 2GHz clock speed IC.
2. Small, high cap
Applications
High speed IC package (FPGA, network processor, etc) Part Number LW T
Dimensions (mm)
P
2.0 ±0.1 1.25 ±0.1 0.5 ±0.050.5 +0.05/-0.1
LLM215 3.2 ±0.15 1.6 ±0.15 0.8 ±0.10.5 +0.05/-0.1
LLM315
LW
Equivalent Circuit
T
P
qwer
qetu
wryi
o
!0
oiuy
t!0
Reversed Geometry Low ESL Type
Controlled ESR Low ESL Type
Eight Terminals Low ESL Type
Ten Terminals Low ESL Type
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Capacitance Table
77
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Reversed Geometry Low ESL Type X7R(R7)/X7S(C7)/X6S(C8)/X5R(R6) Characteristics
0.5x1.0
(15)
<0204>
0.8x1.6
(18)
<0306>
1.25x2.0
(21)
<0508>
1.6x3.2
(31)
<0612>
6.3
(0J)
5ex.5: T Dimension [mm]
LxW
[mm]
Rated Voltage
[Vdc]
Capacitance
2200pF(222)
4700pF(472)
10000pF(103)
22000pF(223)
47000pF(473)
0.10µF(104)
0.22µF(224)
0.47µF(474)
1.0µF(105)
2.2µF(225)
4.7µF(475)
10µF(106)
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
4
(0G)50
(1H)25
(1E)16
(1C)10
(1A)4
(0G)50
(1H)25
(1E)16
(1C)10
(1A)4
(0G)50
(1H)25
(1E)16
(1C)10
(1A)6.3
(0J)
3
3
3
5
5
5
5
5
5
5
5
5
5
6
6
6
6
96
9
9
9
7
7
7
M7
M
M
7
7
M7
M7
M
M
Reversed Geometry Low ESL Type X7R(R7)/X7S(C7) Characteristics-Low Profile
1.6x3.2
(31)
<0612>
0.8x1.6
(18)
<0306>
1.25x2.0
(21)
<0508>
25
(1E)
5ex.5: T Dimension [mm]
LxW
[mm]
Rated Voltage
[Vdc]
Capacitance
10000pF(103)
22000pF(223)
47000pF(473)
0.10µF(104)
0.22µF(224)
0.47µF(474)
1.0µF(105)
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
16
(1C)10
(1A)4
(0G)50
(1H)25
(1E)16
(1C)10
(1A)6.3
(0J)4
(0G)50
(1H)25
(1E)16
(1C)10
(1A)
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
Controlled ESR Low ESL Type X7S(C7) Characteristics
0.8x1.6
(18)
<0306>
5ex.5: T Dimension [mm]
LxW
[mm]
Rated Voltage
[Vdc]
ESR
[m]
Capacitance
1.0µF(105)
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
4
(0G)
100
(E01)220
(E03)470
(E05)1000
(E07)
5555
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Capacitance Table
78
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Eight Terminals Low ESL Type X7S(C7)/X7R(R7) Characteristics
1.6x0.8
(18)
<0603>
2.0x1.25
(21)
<0805>
3.2x1.6
(31)
<1206>
4
(0G)
5ex.5: T Dimension [mm]
LxW
[mm]
Rated Voltage
[Vdc]
Capacitance
10000pF(103)
22000pF(223)
47000pF(473)
0.10µF(104)
0.22µF(224)
0.47µF(474)
1.0µF(105)
2.2µF(225)
4.7µF(475)
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
25
(1E)16
(1C)10
(1A)6.3
(0J)4
(0G)16
(1C)10
(1A)4
(0G)
5
5
5
5
5
9
9
9
9
9
9
9
9
9
9
9
9
M9
M9
Eight Terminals Low ESL Type X7R(R7)/X7S(C7) Characteristics-Low Profile
2.0x1.25
(21)
<0805>
3.2x1.6
(31)
<1206>
5ex.5: T Dimension [mm]
LxW
[mm]
Rated Voltage
[Vdc]
Capacitance
10000pF(103)
22000pF(223)
47000pF(473)
0.10µF(104)
0.22µF(224)
0.47µF(474)
1.0µF(105)
2.2µF(225)
4.7µF(475)
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
25
(1E)16
(1C)10
(1A)6.3
(0J)4
(0G)16
(1C)10
(1A)6.3
(0J)
5
5
5
5
5
5
5
5
5
5
5
5
5
Ten Terminals Low ESL Type X7R(R7)/X7S(C7) Characteristics-Low Profile
2.0x1.25
(21)
<0805>
3.2x1.6
(31)
<1206>
5ex.5: T Dimension [mm]
LxW
[mm]
Rated Voltage
[Vdc]
Capacitance
10000pF(103)
22000pF(223)
47000pF(473)
0.10µF(104)
0.22µF(224)
0.47µF(474)
1.0µF(105)
2.2µF(225)
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
25
(1E)16
(1C)6.3
(0J)4
(0G)16
(1C)10
(1A)6.3
(0J)
5
5
5
5
5
5
5
5
5
5
5
5
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
79
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
LLL153 Series 4V/0.47µF(L: 0.5+0.07/-0.03mm)
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
* Please refer to LLL/LLR/LLA/LLM Series Specifications and Test Method (2).
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
6.3(0J)
LLL153C80J104ME01E*
LLL153C80J224ME14E*
4(0G)
LLL153C70G474ME17E*
0.5x1.0(15)<0204>
0.10µF(104)
0.22µF(224)
0.47µF(474)
±20%(M)
±20%(M)
±20%(M)
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
50(1H)
LLL185R71H222MA01L
LLL185R71H472MA01L
25(1E)
LLL185R71E103MA01L
LLL185R71E223MA01L
16(1C)
LLL185R71C473MA01L
10(1A)
LLL185R71A104MA01L
LLL185R71A224MA01L
0.8x1.6(18)<0306>
2200pF(222)
4700pF(472)
10000pF(103)
22000pF(223)
47000pF(473)
0.10µF(104)
0.22µF(224)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
4(0G)
LLL185C70G474MA01L
LLL185C70G105ME02L*
LLL185C70G225ME01L*
0.8x1.6(18)<0306>
0.47µF(474)
1.0µF(105)
2.2µF(225)
±20%(M)
±20%(M)
±20%(M)
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
50(1H)
LLL216R71H103MA01L
LLL216R71H223MA01L
25(1E)
LLL216R71E473MA01L
LLL216R71E104MA01L
16(1C)
LLL219R71C224MA01L
10(1A)
LLL216R71A224MA01L
LLL219R71A474MA01L
LLL219R71A105MA01L
1.25x2.0(21)<0508>
10000pF(103)
22000pF(223)
47000pF(473)
0.10µF(104)
0.22µF(224)
0.47µF(474)
1.0µF(105)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
4(0G)
LLL219C70G225MA01L
1.25x2.0(21)<0508>
2.2µF(225)±20%(M)
Reversed Geometry Low ESL Type X7R(R7)/X7S(C7)/X6S(C8) Characteristics
LL L 15 3 C8 0J 104 M E01 E
Packaging Code in Part Number shows STD 180mm Reel Taping.
qProduct ID wSeries eDimensions (LxW) rDimension (T)
tTemperature Characteristics yRated Voltage uCapacitance
iCapacitance Tolerance oIndividual Specification Code !0Packaging
(Part Number)
wq e r t y u i o !0
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
80
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
* Please refer to LLL/LLR/LLA/LLM Series Specifications and Test Method (2).
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
50(1H)
LLL317R71H103MA01L
LLL317R71H223MA01L
LLL317R71H473MA01L
LLL31MR71H104MA01L
25(1E)
LLL317R71E104MA01L
LLL31MR71E224MA01L
LLL31MR71E474MA01L
16(1C)
LLL317R71C224MA01L
LLL317R71C474MA01L
LLL31MR71C105MA01L
10(1A)
LLL317R71A105MA01L
LLL31MR71A225MA01L
1.6x3.2(31)<0612>
10000pF(103)
22000pF(223)
47000pF(473)
0.10µF(104)
0.22µF(224)
0.47µF(474)
1.0µF(105)
2.2µF(225)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
6.3(0J)
LLL317R70J225MA01L
LLL31MR70J475MA01L
LLL31MR60J106ME01L*
1.6x3.2(31)<0612>
2.2µF(225)
4.7µF(475)
10µF(106)
±20%(M)
±20%(M)
±20%(M)
Reversed Geometry Low ESL Type X7R(R7)/X5R(R6) Characteristics
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
25(1E)
LLL185R71E103MA11L
16(1C)
LLL185R71C223MA11L
LLL185R71C473MA11L
10(1A)
LLL185R71A104MA11L
4(0G)
LLL185C70G224MA11L
0.8x1.6(18)<0306>
10000pF(103)
22000pF(223)
47000pF(473)
0.10µF(104)
0.22µF(224)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
50(1H)
LLL215R71H103MA11L
25(1E)
LLL215R71E223MA11L
16(1C)
LLL215R71C473MA11L
LLL215R71C104MA11L
10(1A)
LLL215R71A224MA11L
1.25x2.0(21)<0508>
10000pF(103)
22000pF(223)
47000pF(473)
0.10µF(104)
0.22µF(224)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
6.3(0J)
LLL215R70J474MA11L
4(0G)
LLL215C70G105MA11L
1.25x2.0(21)<0508>
0.47µF(474)
1.0µF(105)
±20%(M)
±20%(M)
Reversed Geometry Low ESL Type X7R(R7)/X7S(C7) Characteristics-Low Profile
LL L 31 7 R7 1H 103 M A01 L
Packaging Code in Part Number shows STD 180mm Reel Taping.
qProduct ID wSeries eDimensions (LxW) rDimension (T)
tTemperature Characteristics yRated Voltage uCapacitance
iCapacitance Tolerance oIndividual Specification Code !0Packaging
(Part Number)
wq e r t y u i o !0
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
81
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
50(1H)
LLL315R71H103MA11L
LLL315R71H223MA11L
25(1E)
LLL315R71E473MA11L
LLL315R71E104MA11L
16(1C)
LLL315R71C224MA11L
10(1A)
LLL315R71A474MA11L
1.6x3.2(31)<0612>
10000pF(103)
22000pF(223)
47000pF(473)
0.10µF(104)
0.22µF(224)
0.47µF(474)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
Reversed Geometry Low ESL Type X7R(R7) Characteristics-Low Profile
LxW [mm]
Rated Volt. [Vdc]
ESR [m]
Capacitance Tolerance Part Number
100(E01)
LLR185C70G105ME01L*
220(E03)
LLR185C70G105ME03L*
470(E05)
LLR185C70G105ME05L*
1000(E07)
4(0G)
LLR185C70G105ME07L*
0.8x1.6(18)<0306>
10000pF(103)±20%(M)
Controlled ESR Low ESL Type X7S(C7) Characteristics
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
4(0G)
LLA185C70G104MA01L
LLA185C70G224MA01L
LLA185C70G474MA01L
LLA185C70G105ME01L*
LLA185C70G225ME16L*
1.6x0.8(18)<0603>
0.10µF(104)
0.22µF(224)
0.47µF(474)
1.0µF(105)
2.2µF(225)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
25(1E)
LLA219R71E103MA01L
LLA219R71E223MA01L
LLA219R71E473MA01L
16(1C)
LLA219R71C104MA01L
LLA219R71C224MA01L
10(1A)
LLA219R71A474MA01L
6.3(0J)
LLA219R70J105MA01L
2.0x1.25(21)<0805>
10000pF(103)
22000pF(223)
47000pF(473)
0.10µF(104)
0.22µF(224)
0.47µF(474)
1.0µF(105)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
4(0G)
LLA219C70G225MA01L
LLA219C70G475ME01L*
2.0x1.25(21)<0805>
2.2µF(225)
4.7µF(475)
±20%(M)
±20%(M)
Eight Terminals Low ESL Type X7R(R7)/X7S(C7) Characteristics
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
* Please refer to LLL/LLR/LLA/LLM Series Specifications and Test Method (2).
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
* Please refer to LLL/LLR/LLA/LLM Series Specifications and Test Method (2).
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
82
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
* Please refer to LLL/LLR/LLA/LLM Series Specifications and Test Method (2).
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
25(1E)
LLA215R71E103MA14L
LLA215R71E223MA14L
16(1C)
LLA215R71C473MA14L
LLA215R71C104MA14L
10(1A)
LLA215R71A224MA14L
6.3(0J)
LLA215R70J474MA14L
2.0x1.25(21)<0805>
10000pF(103)
22000pF(223)
47000pF(473)
0.10µF(104)
0.22µF(224)
0.47µF(474)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
4(0G)
LLA215C70G105MA14L
LLA215C70G225ME11L*
LLA215C70G475ME19L*
2.0x1.25(21)<0805>
0.22µF(224)
0.47µF(474)
1.0µF(105)
2.2µF(225)
4.7µF(475)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
16(1C)
LLA315R71C224MA14L
10(1A)
LLA315R71A474MA14L
6.3(0J)
LLA315R70J105MA14L
LLA315R70J225MA14L
3.2x1.6(31)<1206>
Eight Terminals Low ESL Type X7R(R7)/X7S(C7) Characteristics-Low Profile
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
16(1C)
LLA319R71C104MA01L
LLA319R71C224MA01L
LLA319R71C474MA01L
LLA31MR71C105MA01L
10(1A)
LLA319R71A105MA01L
LLA31MR71A225MA01L
4(0G)
LLA319R70G225MA01L
3.2x1.6(31)<1206>
0.10µF(104)
0.22µF(224)
0.47µF(474)
1.0µF(105)
2.2µF(225)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
Eight Terminals Low ESL Type X7R(R7) Characteristics
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
25(1E)
LLM215R71E103MA11L
LLM215R71E223MA11L
16(1C)
LLM215R71C473MA11L
LLM215R71C104MA11L
6.3(0J)
LLM215R70J224MA11L
LLM215R70J474MA11L
4(0G)
LLM215C70G105MA11L
LLM215C70G225ME11L*
2.0x1.25(21)<0805>
10000pF(103)
22000pF(223)
47000pF(473)
0.10µF(104)
0.22µF(224)
0.47µF(474)
1.0µF(105)
2.2µF(225)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
16(1C)
LLM315R71C104MA11L
LLM315R71C224MA11L
10(1A)
LLM315R71A474MA11L
6.3(0J)
LLM315R70J225MA11L
3.2x1.6(31)<1206>
0.10µF(104)
0.22µF(224)
0.47µF(474)
2.2µF(225)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
Ten Terminals Low ESL Type X7R(R7)/X7S(C7) Characteristics-Low Profile
LL A 31 9 R7 1C 104 M A01 L
Packaging Code in Part Number shows STD 180mm Reel Taping.
qProduct ID wSeries eDimensions (LxW) rDimension (T)
tTemperature Characteristics yRated Voltage uCapacitance
iCapacitance Tolerance oIndividual Specification Code !0Packaging
(Part Number)
wq e r t y u i o !0
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Continued on the following page.
Preheat the capacitor at 120 to 150°C for 1 minute. Immerse
the capacitor in a eutectic solder or Sn-3.0Ag-0.5Cu solder
solution at 270±5°C for 10±0.5 seconds. Let sit at room
temperature for 24±2 hours, then measure.
• Initial measurement.
Perform a heat treatment at 150+0/–10°C for one hour and
then let sit for 24±2 hours at room temperature. Perform the
initial measurement.
13
Resistance
to Soldering
Heat
Appearance
No marking defects
Capacitance
Change
Within ±7.5%
D.F. W.V.: 25V min.; 0.025 max.
W.V.: 16V/10V max.; 0.035 max.
W.V.: 6.3V max.; 0.05 max.
I.R. More than 10,000M or 500 · F (whichever is smaller)
Dielectric
Strength
No failure
Immerse the capacitor in a solution of ethanol (JIS-K-8101) and
rosin (JIS-K-5902) (25% rosin in weight proportion). Preheat at
80 to 120°C for 10 to 30 seconds. After preheating, immerse in
eutectic solder solution for 2±0.5 seconds at 230±5°C, or
Sn-3.0Ag-0.5Cu solder solution for 2±0.5 seconds at 245±5°C.
12 Solderability of
Termination 75% of the terminations are to be soldered evenly
and continuously.
LLL/LLA/LLM Series Specifications and Test Methods (1)
Step Temperature (°C)
25±2
–55±3
25±2
125±3
25±2
1
2
3
4
5
Char. Temp. Range
(°C)
–55 to +125
–55 to +125
Reference
Temp.
25°C
25°C
Cap.Change
Within ±15%
Within ±22%
R7
C7
Solder the capacitor to the test jig (glass epoxy board) in
the same manner and under the same conditions as (10). The
capacitor should be subjected to a simple harmonic motion
having a total amplitude of 1.5mm, the frequency being varied
uniformly between the approximate limits of 10 and 55Hz. The
frequency range, from 10 to 55Hz and return to 10Hz, should
be traversed in approximately 1 minute. This motion should be
applied for a period of 2 hours in each of 3 mutually
perpendicular directions (total of 6 hours).
11
Vibration
Resistance
Appearance
No defects or abnormalities
Capacitance
Within the specified tolerance
D.F. W.V.: 25V min.; 0.025 max.
W.V.: 16V/10V max.; 0.035 max.
W.V.: 6.3V max.; 0.05 max.
Solder the capacitor to the test jig (glass epoxy board) using a
eutectic solder. Then apply 10N* force in parallel with the test
jig for 10±1 sec. The soldering should be done either with an
iron or using the reflow method and should be conducted with
care so that the soldering is uniform and free of defects such as
heat shock. *5N (LLL18 and LLA/LLM Series)
10 Adhesive Strength
of Termination No removal of the terminations or other defect should occur.
The capacitance change should be measured after 5 min. at
each specified temperature stage.
The ranges of capacitance change compared with the 25°C
value over the temperature ranges shown in the table should
be within the specified ranges.
• Initial measurement.
Perform a heat treatment at 150+0/-10°C for one hour and then
set for 24±2 hours at room temperature. Perform the initial
measurement.
9Capacitance
Temperature
Characteristics
8Dissipation Factor
(D.F.)
W.V.: 25V min.; 0.025 max.
W.V.: 16V/10V max.; 0.035 max.
W.V.: 6.3V max.; 0.05 max.
The capacitance/D.F. should be measured at 25°C at the
frequency and voltage shown in the table.
Frequency: 1±0.1kHz
Voltage: 1±0.2Vrms
*For LLA185C70G474, the capacitance should be measured
unsing a voltage of 0.5±0.1Vrms.
7 Capacitance Within the specified tolerance
The insulation resistance should be measured with a DC voltage
not exceeding the rated voltage at 25°C and 75%RH max. and
within 2 minutes of charging.
6Insulation
Resistance
CV0.047µF: More than 10,000M
CG0.047µF: More than 500 · F
C: Normal Capacitance
No failure should be observed when 250% of the rated voltage
is applied between the terminations for 1 to 5 seconds,
provided the charge/discharge current is less than 50mA.
5 Dielectric Strength No defects or abnormalities
Using calipers4 Dimensions Within the specified dimension
Visual inspection3 Appearance No defects or abnormalities
The rated voltage is defined as the maximum voltage that may
be applied continuously to the capacitor.
When AC voltage is superimposed on DC voltage, VP-P or VO-P,
whichever is larger, should be maintained within the rated
voltage range.
2 Rated Voltage See the previous pages.
1Operating
Temperature
Range R7, C7: –55 to +125°C
No. Test MethodSpecificationsItem
!Note 1. This Specifications and Test Methods is downloaded from the website of Murata Manufacturing co.,ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice.
0. Please check with our sales representatives or product engineers before ordering.
2. This Specifications and Test Methods has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product
0. specifications before ordering.
LLL/LLR/LLA/LLM Series Specifications and Test Methods (1)
83
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
When no "*" is added in PNs table, please refer to LLL/LLR/LLA/LLM Series Specifications and Test Methods (1).
When "*" is added in PNs table, please refer to LLL/LLR/LLA/LLM Series Specifications and Test Methods (2).
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Continued from the preceding page.
Apply 200% of the rated voltage for 1000±12 hours at the
maximum operating temperature ±3°C. Let sit for 24±2 hours
at room temperature, then measure. The charge/discharge
current is less than 50mA.
•Initial measurement.
Apply 200% of the rated DC voltage for one hour at the
maximum operating temperature ±3°C. Remove and let sit for
24±2 hours at room temperature.
Perform initial measurement.
17
High
Temperature
Load
Appearance
No marking defects
Capacitance
Change
Within ±12.5%
D.F. W.V.: 10V min.; 0.05 max.
W.V.: 6.3V max.; 0.075 max.
I.R. More than 1,000M or 50 · F
(whichever is smaller)
Apply the rated voltage at 40±2°C and 90 to 95% humidity for
500±12 hours. Remove and let sit for 24±2 hours at room
temperature, then measure. The charge/discharge current is
less than 50mA.
16
Humidity
Load
Appearance
No marking defects
Capacitance
Change
Within ±12.5%
D.F. W.V.: 10V min.; 0.05 max.
W.V.: 6.3V max.; 0.075 max.
I.R. More than 500M or 25 · F
(whichever is smaller)
Set the capacitor at 40±2°C and 90 to 95% humidity for 500±12
hours. Remove and let sit for 24±2 hours at room temperature,
then measure.
15
Humidity
(Steady
State)
Appearance
No marking defects
Capacitance
Change
Within ±12.5%
D.F. W.V.: 10V min.; 0.05 max.
W.V.: 6.3V max.; 0.075 max.
I.R. More than 1,000M or 50 · F (whichever is smaller)
Fix the capacitor to the supporting jig in the same manner and
under the same conditions as (10).
Perform the five cycles according to the four heat treatments
listed in the following table. Let sit for 24±2 hours at room
temperature, then measure.
• Initial measurement.
Perform a heat treatment at 150+0/–10°C for one hour and
then let sit for 24±2 hours at room temperature. Perform the
initial measurement.
14
Temperature
Cycle
Appearance
No marking defects
Capacitance
Change
Within ±7.5%
D.F. W.V.: 25V min.; 0.025 max.
W.V.: 16V/10V max.; 0.035 max.
W.V.: 6.3V max.; 0.05 max.
I.R. More than 10,000M or 500 · F (whichever is smaller)
Dielectric
Strength
No failure
LLL/LLA/LLM Series Specifications and Test Methods (1)
Step
Temp. (°C)
Time (min.)
1
Min. Operating
Temp. +0/–3
30±3
2
Room
Temp.
2 to 3
3
Max. Operating
Temp. +3/–0
30±3
4
Room
Temp.
2 to 3
No. Test MethodSpecificationsItem
!Note 1. This Specifications and Test Methods is downloaded from the website of Murata Manufacturing co.,ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice.
0. Please check with our sales representatives or product engineers before ordering.
2. This Specifications and Test Methods has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product
0. specifications before ordering.
LLL/LLR/LLA/LLM Series Specifications and Test Methods (1)
84
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
When no "*" is added in PNs table, please refer to LLL/LLR/LLA/LLM Series Specifications and Test Methods (1).
When "*" is added in PNs table, please refer to LLL/LLR/LLA/LLM Series Specifications and Test Methods (2).
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Preheat the capacitor at 120 to 150°C for 1 minute. Immerse
the capacitor in a eutectic solder or Sn-3.0Ag-0.5Cu solder
solution at 270±5°C for 10±0.5 seconds.
Let sit at room temperature for 24±2 hours, then measure.
• Initial measurement.
Perform a heat treatment at 150+0/–10°C for one hour and
then let sit for 24±2 hours at room temperature. Perform the
initial measurement.
13
Resistance
to Soldering
Heat
Appearance
No marking defects
Capacitance
Change
R6, R7, C7, C8: Within ±7.5%
D.F. R6, R7, C7, C8: 0.120 max.
I.R. 50 · F min.
Dielectric
Strength
No failure
Immerse the capacitor in a solution of ethanol (JIS-K-8101) and
rosin (JIS-K-5902) (25% rosin in weight proportion). Preheat at
80 to 120°C for 10 to 30 seconds. After preheating, immerse in
eutectic solder solution for 2±0.5 seconds at 230±5°C, or
Sn-3.0Ag-0.5Cu solder solution for 2±0.5 seconds at 245±5°C.
12 Solderability of
Termination 75% of the terminations are to be soldered evenly
and continuously.
Solder the capacitor to the test jig (glass epoxy board) in
the same manner and under the same conditions as (10). The
capacitor should be subjected to a simple harmonic motion
having a total amplitude of 1.5mm, the frequency being varied
uniformly between the approximate limits of 10 and 55Hz. The
frequency range, from 10 to 55Hz and return to 10Hz, should
be traversed in approximately 1 minute. This motion should be
applied for a period of 2 hours in each of 3 mutually
perpendicular directions (total of 6 hours).
11
Vibration
Appearance
No defects or abnormalities
Capacitance
Within the specified tolerance
D.F. R6, R7, C7, C8: 0.120 max.
Solder the capacitor to the test jig (glass epoxy board) using a
eutectic solder. Then apply 10N* force in parallel with the test
jig for 10±1 sec. The soldering should be done either with an
iron or using the reflow method and should be conducted with
care so that the soldering is uniform and free of defects such as
heat shock. *5N (LLL15, LLL18, LLR18, LLA, LLM Series)
10 Adhesive Strength
of Termination No removal of the terminations or other defect should occur.
The capacitance change should be measured after 5 min. at
each specified temperature stage.
The ranges of capacitance change compared with the 25°C
value over the temperature ranges shown in the table should
be within the specified ranges.
• Initial measurement.
Perform a heat treatment at 150+0/-10°C for one hour and then
set for 24±2 hours at room temperature. Perform the initial
measurement.
9Capacitance
Temperature
Characteristics
8Dissipation Factor
(D.F.) R6, R7, C7, C8: 0.120 max.
The capacitance/D.F. should be measured at 25°C at the
frequency and voltage shown in the table.
7 Capacitance Within the specified tolerance
The insulation resistance should be measured with a DC voltage
not exceeding the rated voltage at 25°C and 75%RH max. and
within 1 minute of charging.
6Insulation
Resistance 50 · F min.
No failure should be observed when 250% of the rated voltage
is applied between the terminations for 1 to 5 seconds,
provided the charge/discharge current is less than 50mA.
5 Dielectric Strength No defects or abnormalities
Using calipers4 Dimensions Within the specified dimension
Visual inspection3 Appearance No defects or abnormalities
The rated voltage is defined as the maximum voltage that may
be applied continuously to the capacitor.
When AC voltage is superimposed on DC voltage, VP-P or VO-P,
whichever is larger, should be maintained within the rated
voltage range.
2 Rated Voltage See the previous pages.
1Operating
Temperature
Range
R6: –55 to +85°C
R7, C7: –55 to +125°C
C8: –55 to +105°C
No. Test MethodSpecificationsItem
Continued on the following page.
Temp. Range
(°C)
Char.
–55 to +85
–55 to +125
–55 to +125
–55 to +105
Reference
Temp.
25°C
Cap. Change
Within ±15%
Within ±15%
Within ±22%
Within ±22%
R6
R7
C7
C8
FrequencyCapacitance 1±0.1kHz
1±0.1kHz
120±24Hz
Voltage
1.0±0.2Vrms
0.5±0.1Vrms
0.5±0.1Vrms
CV10µF (10V min.)
CV10µF (6.3V max.)
C>10µF
LLL/LLR/LLA/LLM Series Specifications and Test Methods (2)
!Note 1. This Specifications and Test Methods is downloaded from the website of Murata Manufacturing co.,ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice.
0. Please check with our sales representatives or product engineers before ordering.
2. This Specifications and Test Methods has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product
0. specifications before ordering.
LLL/LLR/LLA/LLM Series Specifications and Test Methods (2)
85
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
When no "*" is added in PNs table, please refer to LLL/LLR/LLA/LLM Series Specifications and Test Methods (1).
When "*" is added in PNs table, please refer to LLL/LLR/LLA/LLM Series Specifications and Test Methods (2).
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
The ESR should be measured at room temperature with the
Equivalent of HP4294A.
*
17 ESR
Within below ESR value at Frequency: 10±0.1MHz
100m: Within 70 to 130m
220m: Within 154 to 286m
470m: Within 329 to 611m
1000m: Within 700 to 1300m
Apply 150% of the rated voltage for 1000±12 hours at the
maximum operating temperature ±3°C.
The charge/discharge current is less than 50mA.
•Initial measurement
Perform a heat treatment at 150+0/–10°C for one hour and
then let sit for 24±2 hours at room temperature. Perform the
initial measurement.
•Measurement after test
Perform a heat treatment at 150+0/–10°C for one hour and
then let sit for 24±2 hours at room temperature, then measure.
16
Durability
Appearance
No marking defects
Capacitance
Change
R6, R7, C7, C8: Within ±12.5%
* LLL153C70G474: Within ±20%
D.F. R6, R7, C7, C8: 0.2 max.
I.R. 25 · F min.
Apply the rated voltage at 40±2°C and 90 to 95% humidity for
500±12 hours.
The charge/discharge current is less than 50mA.
Apply the rated DC voltage.
•Initial measurement
Perform a heat treatment at 150+0/–10°C for one hour and
then let sit for 24±2 hours at room temperature. Perform the
initial measurement.
•Measurement after test
Perform a heat treatment at 150+0/–10°C for one hour and
then let sit for 24±2 hours at room temperature, then measure.
15
High
Temperature
High
Humidity
(Steady
State)
Appearance
No marking defects
Capacitance
Change
R6, R7, C7, C8: Within ±12.5%
D.F. R6, R7, C7, C8: 0.2 max.
I.R. 12.5 · F min.
Fix the capacitor to the supporting jig in the same manner and
under the same conditions as (10).Perform the five cycles
according to the four heat treatments listed in the following
table. Let sit for 24±2 hours at room temperature,
then measure.
• Initial measurement
Perform a heat treatment at 150+0/–10°C for one hour and
then let sit for 24±2 hours at room temperature. Perform the
initial measurement.
14
Temperature
Sudden
Change
Appearance
No marking defects
Capacitance
Change
R6, R7, C7, C8: Within ±12.5%
D.F. R6, R7, C7, C8: 0.120 max.
I.R. 50 · F min.
Dielectric
Strength
No failure
No. Test MethodSpecificationsItem
Continued from the preceding page.
LLL/LLR/LLA/LLM Series Specifications and Test Methods (2)
1Step
Min. Operating
Temp. +0/–3
30±3
2
Room
Temp.
2 to 3
3
Min. Operating
Temp. +0/–3
30±3
4
Room
Temp.
2 to 3
Temp. (°C)
Time (min.)
* LLR: This specification is only for LLR Type
!Note 1. This Specifications and Test Methods is downloaded from the website of Murata Manufacturing co.,ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice.
0. Please check with our sales representatives or product engineers before ordering.
2. This Specifications and Test Methods has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product
0. specifications before ordering.
LLL/LLR/LLA/LLM Series Specifications and Test Methods (2)
86
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
When no "*" is added in PNs table, please refer to LLL/LLR/LLA/LLM Series Specifications and Test Methods (1).
When "*" is added in PNs table, please refer to LLL/LLR/LLA/LLM Series Specifications and Test Methods (2).
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
87
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Chip Monolithic Ceramic Capacitors
High-Q Type GJM Series
Features
1. Mobile Telecommunication and RF module, mainly
2. Improvement of telephone call quality, Low power
Consumption, yield ratio improvement.
Applications
VCO, PA, Mobile Telecommunication
L
T
Part Number LWT
Dimensions (mm) e g min.
1.0 ±0.05 0.5 ±0.05
0.15 to 0.35
0.30.5 ±0.05
GJM15 0.6 ±0.03 0.3 ±0.03 0.1 to 0.2 0.20.3 ±0.03
GJM03
W
e eg
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Capacitance Table
88
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Temperature Compensating Type C0G(5C)/C0H(6C) Characteristics
0.6x0.3
(03)
<0201>
1.0x0.5
(15)
<0402>
25
(1E)
3ex.3: T Dimension [mm]
LxW
[mm]
Rated Voltage
[Vdc]
Capacitance
0.1pF(R10)
0.2pF(R20)
0.3pF(R30)
0.4pF(R40)
0.5pF(R50)
0.6pF(R60)
0.7pF(R70)
0.8pF(R80)
0.9pF(R90)
1.0pF(1R0)
1.1pF(1R1)
1.2pF(1R2)
1.3pF(1R3)
1.4pF(1R4)
1.5pF(1R5)
1.6pF(1R6)
1.7pF(1R7)
1.8pF(1R8)
1.9pF(1R9)
2.0pF(2R0)
2.1pF(2R1)
2.2pF(2R2)
2.3pF(2R3)
2.4pF(2R4)
2.5pF(2R5)
2.6pF(2R6)
2.7pF(2R7)
2.8pF(2R8)
2.9pF(2R9)
3.0pF(3R0)
3.1pF(3R1)
3.2pF(3R2)
3.3pF(3R3)
3.4pF(3R4)
3.5pF(3R5)
3.6pF(3R6)
3.7pF(3R7)
3.8pF(3R8)
3.9pF(3R9)
4.0pF(4R0)
4.1pF(4R1)
4.2pF(4R2)
4.3pF(4R3)
4.4pF(4R4)
4.5pF(4R5)
4.6pF(4R6)
4.7pF(4R7)
4.8pF(4R8)
4.9pF(4R9)
6.3
(0J)50
(1H)
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
0.6x0.3
(03)
<0201>
1.0x0.5
(15)
<0402>
25
(1E)
LxW
[mm]
Rated Voltage
[Vdc]
Capacitance
5.0pF(5R0)
5.1pF(5R1)
5.2pF(5R2)
5.3pF(5R3)
5.4pF(5R4)
5.5pF(5R5)
5.6pF(5R6)
5.7pF(5R7)
5.8pF(5R8)
5.9pF(5R9)
6.0pF(6R0)
6.1pF(6R1)
6.2pF(6R2)
6.3pF(6R3)
6.4pF(6R4)
6.5pF(6R5)
6.6pF(6R6)
6.7pF(6R7)
6.8pF(6R8)
6.9pF(6R9)
7.0pF(7R0)
7.1pF(7R1)
7.2pF(7R2)
7.3pF(7R3)
7.4pF(7R4)
7.5pF(7R5)
7.6pF(7R6)
7.7pF(7R7)
7.8pF(7R8)
7.9pF(7R9)
8.0pF(8R0)
8.1pF(8R1)
8.2pF(8R2)
8.3pF(8R3)
8.4pF(8R4)
8.5pF(8R5)
8.6pF(8R6)
8.7pF(8R7)
8.8pF(8R8)
8.9pF(8R9)
9.0pF(9R0)
9.1pF(9R1)
9.2pF(9R2)
9.3pF(9R3)
9.4pF(9R4)
9.5pF(9R5)
9.6pF(9R6)
9.7pF(9R7)
9.8pF(9R8)
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
6.3
(0J)50
(1H)
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
0.6x0.3
(03)
<0201>
1.0x0.5
(15)
<0402>
25
(1E)
LxW
[mm]
Rated Voltage
[Vdc]
Capacitance
9.9pF(9R9)
10pF(100)
11pF(110)
12pF(120)
13pF(130)
15pF(150)
16pF(160)
18pF(180)
20pF(200)
22pF(220)
24pF(240)
27pF(270)
30pF(300)
33pF(330)
6.3
(0J)50
(1H)
3
3
3
3
3
3
3
3
3
3
3
3
3
3
5
5
5
5
5
5
5
5
5
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
89
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
25(1E)
GJM0335C1ER20WB01D
GJM0335C1ER20BB01D
GJM0335C1ER30WB01D
GJM0335C1ER30BB01D
GJM0335C1ER40WB01D
GJM0335C1ER40BB01D
GJM0335C1ER50WB01D
GJM0335C1ER50BB01D
GJM0335C1ER60WB01D
GJM0335C1ER60BB01D
GJM0335C1ER70WB01D
GJM0335C1ER70BB01D
GJM0335C1ER80WB01D
GJM0335C1ER80BB01D
GJM0335C1ER90WB01D
GJM0335C1ER90BB01D
GJM0335C1E1R0WB01D
GJM0335C1E1R0BB01D
GJM0335C1E1R0CB01D
GJM0335C1E1R1WB01D
GJM0335C1E1R1BB01D
GJM0335C1E1R1CB01D
GJM0335C1E1R2WB01D
GJM0335C1E1R2BB01D
GJM0335C1E1R2CB01D
GJM0335C1E1R3WB01D
GJM0335C1E1R3BB01D
GJM0335C1E1R3CB01D
GJM0335C1E1R4WB01D
GJM0335C1E1R4BB01D
GJM0335C1E1R4CB01D
GJM0335C1E1R5WB01D
GJM0335C1E1R5BB01D
GJM0335C1E1R5CB01D
GJM0335C1E1R6WB01D
GJM0335C1E1R6BB01D
GJM0335C1E1R6CB01D
GJM0335C1E1R7WB01D
GJM0335C1E1R7BB01D
GJM0335C1E1R7CB01D
GJM0335C1E1R8WB01D
GJM0335C1E1R8BB01D
GJM0335C1E1R8CB01D
GJM0335C1E1R9WB01D
GJM0335C1E1R9BB01D
GJM0335C1E1R9CB01D
50(1H)
GJM1555C1HR10WB01D
GJM1555C1HR10BB01D
GJM1555C1HR20WB01D
GJM1555C1HR20BB01D
GJM1555C1HR30WB01D
GJM1555C1HR30BB01D
GJM1555C1HR40WB01D
GJM1555C1HR40BB01D
GJM1555C1HR50WB01D
GJM1555C1HR50BB01D
GJM1555C1HR60WB01D
GJM1555C1HR60BB01D
GJM1555C1HR70WB01D
GJM1555C1HR70BB01D
GJM1555C1HR80WB01D
GJM1555C1HR80BB01D
GJM1555C1HR90WB01D
GJM1555C1HR90BB01D
GJM1555C1H1R0WB01D
GJM1555C1H1R0BB01D
GJM1555C1H1R0CB01D
GJM1555C1H1R1WB01D
GJM1555C1H1R1BB01D
GJM1555C1H1R1CB01D
GJM1555C1H1R2WB01D
GJM1555C1H1R2BB01D
GJM1555C1H1R2CB01D
GJM1555C1H1R3WB01D
GJM1555C1H1R3BB01D
GJM1555C1H1R3CB01D
GJM1555C1H1R4WB01D
GJM1555C1H1R4BB01D
GJM1555C1H1R4CB01D
GJM1555C1H1R5WB01D
GJM1555C1H1R5BB01D
GJM1555C1H1R5CB01D
GJM1555C1H1R6WB01D
GJM1555C1H1R6BB01D
GJM1555C1H1R6CB01D
GJM1555C1H1R7WB01D
GJM1555C1H1R7BB01D
GJM1555C1H1R7CB01D
GJM1555C1H1R8WB01D
GJM1555C1H1R8BB01D
GJM1555C1H1R8CB01D
GJM1555C1H1R9WB01D
GJM1555C1H1R9BB01D
GJM1555C1H1R9CB01D
0.6x0.3(03)<0201> 1.0x0.5(15)<0402>
0.1pF(R10)
0.2pF(R20)
0.3pF(R30)
0.4pF(R40)
0.5pF(R50)
0.6pF(R60)
0.7pF(R70)
0.8pF(R80)
0.9pF(R90)
1.0pF(1R0)
1.1pF(1R1)
1.2pF(1R2)
1.3pF(1R3)
1.4pF(1R4)
1.5pF(1R5)
1.6pF(1R6)
1.7pF(1R7)
1.8pF(1R8)
1.9pF(1R9)
±0.05pF(W)
±0.1pF(B)
±0.05pF(W)
±0.1pF(B)
±0.05pF(W)
±0.1pF(B)
±0.05pF(W)
±0.1pF(B)
±0.05pF(W)
±0.1pF(B)
±0.05pF(W)
±0.1pF(B)
±0.05pF(W)
±0.1pF(B)
±0.05pF(W)
±0.1pF(B)
±0.05pF(W)
±0.1pF(B)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
Temperature Compensating Type C0G(5C) Characteristics
GJ M 03 3 5C 1E R20 W B01 D
Packaging Code in Part Number shows STD 180mm Reel Taping.
qProduct ID wSeries eDimensions (LxW) rDimension (T)
tTemperature Characteristics yRated Voltage uCapacitance
iCapacitance Tolerance oIndividual Specification Code !0Packaging
(Part Number)
wq e r t y u i o !0
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
90
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
25(1E)
GJM0335C1E2R1WB01D
GJM0335C1E2R1BB01D
GJM0335C1E2R1CB01D
GJM0335C1E2R2WB01D
GJM0335C1E2R2BB01D
GJM0335C1E2R2CB01D
GJM0335C1E2R3WB01D
GJM0335C1E2R3BB01D
GJM0335C1E2R3CB01D
GJM0335C1E2R4WB01D
GJM0335C1E2R4BB01D
GJM0335C1E2R4CB01D
GJM0335C1E2R5WB01D
GJM0335C1E2R5BB01D
GJM0335C1E2R5CB01D
GJM0335C1E2R6WB01D
GJM0335C1E2R6BB01D
GJM0335C1E2R6CB01D
GJM0335C1E2R7WB01D
GJM0335C1E2R7BB01D
GJM0335C1E2R7CB01D
GJM0335C1E2R8WB01D
GJM0335C1E2R8BB01D
GJM0335C1E2R8CB01D
GJM0335C1E2R9WB01D
GJM0335C1E2R9BB01D
GJM0335C1E2R9CB01D
GJM0335C1E3R0WB01D
GJM0335C1E3R0BB01D
GJM0335C1E3R0CB01D
GJM0335C1E3R1WB01D
GJM0335C1E3R1BB01D
GJM0335C1E3R1CB01D
GJM0335C1E3R2WB01D
GJM0335C1E3R2BB01D
GJM0335C1E3R2CB01D
GJM0335C1E3R3WB01D
GJM0335C1E3R3BB01D
GJM0335C1E3R3CB01D
GJM0335C1E3R4WB01D
GJM0335C1E3R4BB01D
GJM0335C1E3R4CB01D
GJM0335C1E3R5WB01D
GJM0335C1E3R5BB01D
GJM0335C1E3R5CB01D
50(1H)
GJM1555C1H2R1WB01D
GJM1555C1H2R1BB01D
GJM1555C1H2R1CB01D
GJM1555C1H2R2WB01D
GJM1555C1H2R2BB01D
GJM1555C1H2R2CB01D
GJM1555C1H2R3WB01D
GJM1555C1H2R3BB01D
GJM1555C1H2R3CB01D
GJM1555C1H2R4WB01D
GJM1555C1H2R4BB01D
GJM1555C1H2R4CB01D
GJM1555C1H2R5WB01D
GJM1555C1H2R5BB01D
GJM1555C1H2R5CB01D
GJM1555C1H2R6WB01D
GJM1555C1H2R6BB01D
GJM1555C1H2R6CB01D
GJM1555C1H2R7WB01D
GJM1555C1H2R7BB01D
GJM1555C1H2R7CB01D
GJM1555C1H2R8WB01D
GJM1555C1H2R8BB01D
GJM1555C1H2R8CB01D
GJM1555C1H2R9WB01D
GJM1555C1H2R9BB01D
GJM1555C1H2R9CB01D
GJM1555C1H3R0WB01D
GJM1555C1H3R0BB01D
GJM1555C1H3R0CB01D
GJM1555C1H3R1WB01D
GJM1555C1H3R1BB01D
GJM1555C1H3R1CB01D
GJM1555C1H3R2WB01D
GJM1555C1H3R2BB01D
GJM1555C1H3R2CB01D
GJM1555C1H3R3WB01D
GJM1555C1H3R3BB01D
GJM1555C1H3R3CB01D
GJM1555C1H3R4WB01D
GJM1555C1H3R4BB01D
GJM1555C1H3R4CB01D
GJM1555C1H3R5WB01D
GJM1555C1H3R5BB01D
GJM1555C1H3R5CB01D
0.6x0.3(03)<0201> 1.0x0.5(15)<0402>
2.1pF(2R1)
2.2pF(2R2)
2.3pF(2R3)
2.4pF(2R4)
2.5pF(2R5)
2.6pF(2R6)
2.7pF(2R7)
2.8pF(2R8)
2.9pF(2R9)
3.0pF(3R0)
3.1pF(3R1)
3.2pF(3R2)
3.3pF(3R3)
3.4pF(3R4)
3.5pF(3R5)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
Temperature Compensating Type C0G(5C) Characteristics
GJM0335C1E2R0WB01D
GJM0335C1E2R0BB01D
GJM0335C1E2R0CB01D
GJM1555C1H2R0WB01D
GJM1555C1H2R0BB01D
GJM1555C1H2R0CB01D
2.0pF(2R0)±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
GJ M 03 3 5C 1E 2R0 W B01 D
Packaging Code in Part Number shows STD 180mm Reel Taping.
qProduct ID wSeries eDimensions (LxW) rDimension (T)
tTemperature Characteristics yRated Voltage uCapacitance
iCapacitance Tolerance oIndividual Specification Code !0Packaging
(Part Number)
wq e r t y u i o !0
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
91
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
25(1E)
GJM0335C1E3R7WB01D
GJM0335C1E3R7BB01D
GJM0335C1E3R7CB01D
GJM0335C1E3R8WB01D
GJM0335C1E3R8BB01D
GJM0335C1E3R8CB01D
GJM0335C1E3R9WB01D
GJM0335C1E3R9BB01D
GJM0335C1E3R9CB01D
GJM0335C1E4R0WB01D
GJM0335C1E4R0BB01D
GJM0335C1E4R0CB01D
GJM0335C1E4R1WB01D
GJM0335C1E4R1BB01D
GJM0335C1E4R1CB01D
GJM0335C1E4R2WB01D
GJM0335C1E4R2BB01D
GJM0335C1E4R2CB01D
GJM0335C1E4R3WB01D
GJM0335C1E4R3BB01D
GJM0335C1E4R3CB01D
GJM0335C1E4R4WB01D
GJM0335C1E4R4BB01D
GJM0335C1E4R4CB01D
GJM0335C1E4R5WB01D
GJM0335C1E4R5BB01D
GJM0335C1E4R5CB01D
GJM0335C1E4R6WB01D
GJM0335C1E4R6BB01D
GJM0335C1E4R6CB01D
GJM0335C1E4R7WB01D
GJM0335C1E4R7BB01D
GJM0335C1E4R7CB01D
GJM0335C1E4R8WB01D
GJM0335C1E4R8BB01D
GJM0335C1E4R8CB01D
GJM0335C1E4R9WB01D
GJM0335C1E4R9BB01D
GJM0335C1E4R9CB01D
GJM0335C1E5R0WB01D
GJM0335C1E5R0BB01D
GJM0335C1E5R0CB01D
GJM0335C1E5R1WB01D
GJM0335C1E5R1BB01D
GJM0335C1E5R1CB01D
GJM0335C1E5R1DB01D
50(1H)
GJM1555C1H3R7WB01D
GJM1555C1H3R7BB01D
GJM1555C1H3R7CB01D
GJM1555C1H3R8WB01D
GJM1555C1H3R8BB01D
GJM1555C1H3R8CB01D
GJM1555C1H3R9WB01D
GJM1555C1H3R9BB01D
GJM1555C1H3R9CB01D
GJM1555C1H4R0WB01D
GJM1555C1H4R0BB01D
GJM1555C1H4R0CB01D
GJM1555C1H4R1WB01D
GJM1555C1H4R1BB01D
GJM1555C1H4R1CB01D
GJM1555C1H4R2WB01D
GJM1555C1H4R2BB01D
GJM1555C1H4R2CB01D
GJM1555C1H4R3WB01D
GJM1555C1H4R3BB01D
GJM1555C1H4R3CB01D
GJM1555C1H4R4WB01D
GJM1555C1H4R4BB01D
GJM1555C1H4R4CB01D
GJM1555C1H4R5WB01D
GJM1555C1H4R5BB01D
GJM1555C1H4R5CB01D
GJM1555C1H4R6WB01D
GJM1555C1H4R6BB01D
GJM1555C1H4R6CB01D
GJM1555C1H4R7WB01D
GJM1555C1H4R7BB01D
GJM1555C1H4R7CB01D
GJM1555C1H4R8WB01D
GJM1555C1H4R8BB01D
GJM1555C1H4R8CB01D
GJM1555C1H4R9WB01D
GJM1555C1H4R9BB01D
GJM1555C1H4R9CB01D
GJM1555C1H5R0WB01D
GJM1555C1H5R0BB01D
GJM1555C1H5R0CB01D
GJM1555C1H5R1WB01D
GJM1555C1H5R1BB01D
GJM1555C1H5R1CB01D
GJM1555C1H5R1DB01D
0.6x0.3(03)<0201> 1.0x0.5(15)<0402>
3.7pF(3R7)
3.8pF(3R8)
3.9pF(3R9)
4.0pF(4R0)
4.1pF(4R1)
4.2pF(4R2)
4.3pF(4R3)
4.4pF(4R4)
4.5pF(4R5)
4.6pF(4R6)
4.7pF(4R7)
4.8pF(4R8)
4.9pF(4R9)
5.0pF(5R0)
5.1pF(5R1)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
Temperature Compensating Type C0G(5C) Characteristics
GJM0335C1E3R6WB01D
GJM0335C1E3R6BB01D
GJM0335C1E3R6CB01D
GJM1555C1H3R6WB01D
GJM1555C1H3R6BB01D
GJM1555C1H3R6CB01D
3.6pF(3R6)±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
92
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
25(1E)
GJM0335C1E5R3WB01D
GJM0335C1E5R3BB01D
GJM0335C1E5R3CB01D
GJM0335C1E5R3DB01D
GJM0335C1E5R4WB01D
GJM0335C1E5R4BB01D
GJM0335C1E5R4CB01D
GJM0335C1E5R4DB01D
GJM0335C1E5R5WB01D
GJM0335C1E5R5BB01D
GJM0335C1E5R5CB01D
GJM0335C1E5R5DB01D
GJM0335C1E5R6WB01D
GJM0335C1E5R6BB01D
GJM0335C1E5R6CB01D
GJM0335C1E5R6DB01D
GJM0335C1E5R7WB01D
GJM0335C1E5R7BB01D
GJM0335C1E5R7CB01D
GJM0335C1E5R7DB01D
GJM0335C1E5R8WB01D
GJM0335C1E5R8BB01D
GJM0335C1E5R8CB01D
GJM0335C1E5R8DB01D
GJM0335C1E5R9WB01D
GJM0335C1E5R9BB01D
GJM0335C1E5R9CB01D
GJM0335C1E5R9DB01D
GJM0335C1E6R0WB01D
GJM0335C1E6R0BB01D
GJM0335C1E6R0CB01D
GJM0335C1E6R0DB01D
GJM0335C1E6R1WB01D
GJM0335C1E6R1BB01D
GJM0335C1E6R1CB01D
GJM0335C1E6R1DB01D
GJM0335C1E6R2WB01D
GJM0335C1E6R2BB01D
GJM0335C1E6R2CB01D
GJM0335C1E6R2DB01D
GJM0335C1E6R3WB01D
GJM0335C1E6R3BB01D
GJM0335C1E6R3CB01D
GJM0335C1E6R3DB01D
50(1H)
GJM1555C1H5R3WB01D
GJM1555C1H5R3BB01D
GJM1555C1H5R3CB01D
GJM1555C1H5R3DB01D
GJM1555C1H5R4WB01D
GJM1555C1H5R4BB01D
GJM1555C1H5R4CB01D
GJM1555C1H5R4DB01D
GJM1555C1H5R5WB01D
GJM1555C1H5R5BB01D
GJM1555C1H5R5CB01D
GJM1555C1H5R5DB01D
GJM1555C1H5R6WB01D
GJM1555C1H5R6BB01D
GJM1555C1H5R6CB01D
GJM1555C1H5R6DB01D
GJM1555C1H5R7WB01D
GJM1555C1H5R7BB01D
GJM1555C1H5R7CB01D
GJM1555C1H5R7DB01D
GJM1555C1H5R8WB01D
GJM1555C1H5R8BB01D
GJM1555C1H5R8CB01D
GJM1555C1H5R8DB01D
GJM1555C1H5R9WB01D
GJM1555C1H5R9BB01D
GJM1555C1H5R9CB01D
GJM1555C1H5R9DB01D
GJM1555C1H6R0WB01D
GJM1555C1H6R0BB01D
GJM1555C1H6R0CB01D
GJM1555C1H6R0DB01D
GJM1555C1H6R1WB01D
GJM1555C1H6R1BB01D
GJM1555C1H6R1CB01D
GJM1555C1H6R1DB01D
GJM1555C1H6R2WB01D
GJM1555C1H6R2BB01D
GJM1555C1H6R2CB01D
GJM1555C1H6R2DB01D
GJM1555C1H6R3WB01D
GJM1555C1H6R3BB01D
GJM1555C1H6R3CB01D
GJM1555C1H6R3DB01D
0.6x0.3(03)<0201> 1.0x0.5(15)<0402>
5.3pF(5R3)
5.4pF(5R4)
5.5pF(5R5)
5.6pF(5R6)
5.7pF(5R7)
5.8pF(5R8)
5.9pF(5R9)
6.0pF(6R0)
6.1pF(6R1)
6.2pF(6R2)
6.3pF(6R3)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
Temperature Compensating Type C0G(5C) Characteristics
GJM0335C1E5R2WB01D
GJM0335C1E5R2BB01D
GJM0335C1E5R2CB01D
GJM0335C1E5R2DB01D
GJM1555C1H5R2WB01D
GJM1555C1H5R2BB01D
GJM1555C1H5R2CB01D
GJM1555C1H5R2DB01D
5.2pF(5R2)±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
GJ M 03 3 5C 1E 5R2 W B01 D
Packaging Code in Part Number shows STD 180mm Reel Taping.
qProduct ID wSeries eDimensions (LxW) rDimension (T)
tTemperature Characteristics yRated Voltage uCapacitance
iCapacitance Tolerance oIndividual Specification Code !0Packaging
(Part Number)
wq e r t y u i o !0
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
93
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
25(1E)
GJM0335C1E6R5WB01D
GJM0335C1E6R5BB01D
GJM0335C1E6R5CB01D
GJM0335C1E6R5DB01D
GJM0335C1E6R6WB01D
GJM0335C1E6R6BB01D
GJM0335C1E6R6CB01D
GJM0335C1E6R6DB01D
GJM0335C1E6R7WB01D
GJM0335C1E6R7BB01D
GJM0335C1E6R7CB01D
GJM0335C1E6R7DB01D
GJM0335C1E6R8WB01D
GJM0335C1E6R8BB01D
GJM0335C1E6R8CB01D
GJM0335C1E6R8DB01D
GJM0336C1E6R9WB01D
GJM0336C1E6R9BB01D
GJM0336C1E6R9CB01D
GJM0336C1E6R9DB01D
GJM0336C1E7R0WB01D
GJM0336C1E7R0BB01D
GJM0336C1E7R0CB01D
GJM0336C1E7R0DB01D
GJM0336C1E7R1WB01D
GJM0336C1E7R1BB01D
GJM0336C1E7R1CB01D
GJM0336C1E7R1DB01D
GJM0336C1E7R2WB01D
GJM0336C1E7R2BB01D
GJM0336C1E7R2CB01D
GJM0336C1E7R2DB01D
GJM0336C1E7R3WB01D
GJM0336C1E7R3BB01D
GJM0336C1E7R3CB01D
GJM0336C1E7R3DB01D
GJM0336C1E7R4WB01D
GJM0336C1E7R4BB01D
GJM0336C1E7R4CB01D
GJM0336C1E7R4DB01D
GJM0336C1E7R5WB01D
GJM0336C1E7R5BB01D
GJM0336C1E7R5CB01D
GJM0336C1E7R5DB01D
GJM0336C1E7R6WB01D
GJM0336C1E7R6BB01D
GJM0336C1E7R6CB01D
GJM0336C1E7R6DB01D
50(1H)
GJM1555C1H6R5WB01D
GJM1555C1H6R5BB01D
GJM1555C1H6R5CB01D
GJM1555C1H6R5DB01D
GJM1555C1H6R6WB01D
GJM1555C1H6R6BB01D
GJM1555C1H6R6CB01D
GJM1555C1H6R6DB01D
GJM1555C1H6R7WB01D
GJM1555C1H6R7BB01D
GJM1555C1H6R7CB01D
GJM1555C1H6R7DB01D
GJM1555C1H6R8WB01D
GJM1555C1H6R8BB01D
GJM1555C1H6R8CB01D
GJM1555C1H6R8DB01D
GJM1555C1H6R9WB01D
GJM1555C1H6R9BB01D
GJM1555C1H6R9CB01D
GJM1555C1H6R9DB01D
GJM1555C1H7R0WB01D
GJM1555C1H7R0BB01D
GJM1555C1H7R0CB01D
GJM1555C1H7R0DB01D
GJM1555C1H7R1WB01D
GJM1555C1H7R1BB01D
GJM1555C1H7R1CB01D
GJM1555C1H7R1DB01D
GJM1555C1H7R2WB01D
GJM1555C1H7R2BB01D
GJM1555C1H7R2CB01D
GJM1555C1H7R2DB01D
GJM1555C1H7R3WB01D
GJM1555C1H7R3BB01D
GJM1555C1H7R3CB01D
GJM1555C1H7R3DB01D
GJM1555C1H7R4WB01D
GJM1555C1H7R4BB01D
GJM1555C1H7R4CB01D
GJM1555C1H7R4DB01D
GJM1555C1H7R5WB01D
GJM1555C1H7R5BB01D
GJM1555C1H7R5CB01D
GJM1555C1H7R5DB01D
GJM1555C1H7R6WB01D
GJM1555C1H7R6BB01D
GJM1555C1H7R6CB01D
GJM1555C1H7R6DB01D
0.6x0.3(03)<0201> 1.0x0.5(15)<0402>
6.5pF(6R5)
6.6pF(6R6)
6.7pF(6R7)
6.8pF(6R8)
6.9pF(6R9)
7.0pF(7R0)
7.1pF(7R1)
7.2pF(7R2)
7.3pF(7R3)
7.4pF(7R4)
7.5pF(7R5)
7.6pF(7R6)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
Temperature Compensating Type C0G(5C)/C0H(6C) Characteristics
GJM0335C1E6R4WB01D
GJM0335C1E6R4BB01D
GJM0335C1E6R4CB01D
GJM0335C1E6R4DB01D
GJM1555C1H6R4WB01D
GJM1555C1H6R4BB01D
GJM1555C1H6R4CB01D
GJM1555C1H6R4DB01D
6.4pF(6R4)±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
94
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
25(1E)
GJM0336C1E7R8WB01D
GJM0336C1E7R8BB01D
GJM0336C1E7R8CB01D
GJM0336C1E7R8DB01D
GJM0336C1E7R9WB01D
GJM0336C1E7R9BB01D
GJM0336C1E7R9CB01D
GJM0336C1E7R9DB01D
GJM0336C1E8R0WB01D
GJM0336C1E8R0BB01D
GJM0336C1E8R0CB01D
GJM0336C1E8R0DB01D
GJM0336C1E8R1WB01D
GJM0336C1E8R1BB01D
GJM0336C1E8R1CB01D
GJM0336C1E8R1DB01D
GJM0336C1E8R2WB01D
GJM0336C1E8R2BB01D
GJM0336C1E8R2CB01D
GJM0336C1E8R2DB01D
GJM0336C1E8R3WB01D
GJM0336C1E8R3BB01D
GJM0336C1E8R3CB01D
GJM0336C1E8R3DB01D
GJM0336C1E8R4WB01D
GJM0336C1E8R4BB01D
GJM0336C1E8R4CB01D
GJM0336C1E8R4DB01D
GJM0336C1E8R5WB01D
GJM0336C1E8R5BB01D
GJM0336C1E8R5CB01D
GJM0336C1E8R5DB01D
GJM0336C1E8R6WB01D
GJM0336C1E8R6BB01D
GJM0336C1E8R6CB01D
GJM0336C1E8R6DB01D
GJM0336C1E8R7WB01D
GJM0336C1E8R7BB01D
GJM0336C1E8R7CB01D
GJM0336C1E8R7DB01D
GJM0336C1E8R8WB01D
GJM0336C1E8R8BB01D
GJM0336C1E8R8CB01D
GJM0336C1E8R8DB01D
50(1H)
GJM1555C1H7R8WB01D
GJM1555C1H7R8BB01D
GJM1555C1H7R8CB01D
GJM1555C1H7R8DB01D
GJM1555C1H7R9WB01D
GJM1555C1H7R9BB01D
GJM1555C1H7R9CB01D
GJM1555C1H7R9DB01D
GJM1555C1H8R0WB01D
GJM1555C1H8R0BB01D
GJM1555C1H8R0CB01D
GJM1555C1H8R0DB01D
GJM1555C1H8R1WB01D
GJM1555C1H8R1BB01D
GJM1555C1H8R1CB01D
GJM1555C1H8R1DB01D
GJM1555C1H8R2WB01D
GJM1555C1H8R2BB01D
GJM1555C1H8R2CB01D
GJM1555C1H8R2DB01D
GJM1555C1H8R3WB01D
GJM1555C1H8R3BB01D
GJM1555C1H8R3CB01D
GJM1555C1H8R3DB01D
GJM1555C1H8R4WB01D
GJM1555C1H8R4BB01D
GJM1555C1H8R4CB01D
GJM1555C1H8R4DB01D
GJM1555C1H8R5WB01D
GJM1555C1H8R5BB01D
GJM1555C1H8R5CB01D
GJM1555C1H8R5DB01D
GJM1555C1H8R6WB01D
GJM1555C1H8R6BB01D
GJM1555C1H8R6CB01D
GJM1555C1H8R6DB01D
GJM1555C1H8R7WB01D
GJM1555C1H8R7BB01D
GJM1555C1H8R7CB01D
GJM1555C1H8R7DB01D
GJM1555C1H8R8WB01D
GJM1555C1H8R8BB01D
GJM1555C1H8R8CB01D
GJM1555C1H8R8DB01D
0.6x0.3(03)<0201> 1.0x0.5(15)<0402>
7.8pF(7R8)
7.9pF(7R9)
8.0pF(8R0)
8.1pF(8R1)
8.2pF(8R2)
8.3pF(8R3)
8.4pF(8R4)
8.5pF(8R5)
8.6pF(8R6)
8.7pF(8R7)
8.8pF(8R8)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
Temperature Compensating Type C0G(5C)/C0H(6C) Characteristics
GJM0336C1E7R7WB01D
GJM0336C1E7R7BB01D
GJM0336C1E7R7CB01D
GJM0336C1E7R7DB01D
GJM1555C1H7R7WB01D
GJM1555C1H7R7BB01D
GJM1555C1H7R7CB01D
GJM1555C1H7R7DB01D
7.7pF(7R7)±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
GJ M 03 3 6C 1E 7R7 W B01 D
Packaging Code in Part Number shows STD 180mm Reel Taping.
qProduct ID wSeries eDimensions (LxW) rDimension (T)
tTemperature Characteristics yRated Voltage uCapacitance
iCapacitance Tolerance oIndividual Specification Code !0Packaging
(Part Number)
wq e r t y u i o !0
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
95
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
25(1E)
GJM0336C1E9R0WB01D
GJM0336C1E9R0BB01D
GJM0336C1E9R0CB01D
GJM0336C1E9R0DB01D
GJM0336C1E9R1WB01D
GJM0336C1E9R1BB01D
GJM0336C1E9R1CB01D
GJM0336C1E9R1DB01D
GJM0336C1E9R2WB01D
GJM0336C1E9R2BB01D
GJM0336C1E9R2CB01D
GJM0336C1E9R2DB01D
GJM0336C1E9R3WB01D
GJM0336C1E9R3BB01D
GJM0336C1E9R3CB01D
GJM0336C1E9R3DB01D
GJM0336C1E9R4WB01D
GJM0336C1E9R4BB01D
GJM0336C1E9R4CB01D
GJM0336C1E9R4DB01D
GJM0336C1E9R5WB01D
GJM0336C1E9R5BB01D
GJM0336C1E9R5CB01D
GJM0336C1E9R5DB01D
GJM0336C1E9R6WB01D
GJM0336C1E9R6BB01D
GJM0336C1E9R6CB01D
GJM0336C1E9R6DB01D
GJM0336C1E9R7WB01D
GJM0336C1E9R7BB01D
GJM0336C1E9R7CB01D
GJM0336C1E9R7DB01D
GJM0336C1E9R8WB01D
GJM0336C1E9R8BB01D
GJM0336C1E9R8CB01D
GJM0336C1E9R8DB01D
GJM0336C1E9R9WB01D
GJM0336C1E9R9BB01D
GJM0336C1E9R9CB01D
GJM0336C1E9R9DB01D
50(1H)
GJM1555C1H9R0WB01D
GJM1555C1H9R0BB01D
GJM1555C1H9R0CB01D
GJM1555C1H9R0DB01D
GJM1555C1H9R1WB01D
GJM1555C1H9R1BB01D
GJM1555C1H9R1CB01D
GJM1555C1H9R1DB01D
GJM1555C1H9R2WB01D
GJM1555C1H9R2BB01D
GJM1555C1H9R2CB01D
GJM1555C1H9R2DB01D
GJM1555C1H9R3WB01D
GJM1555C1H9R3BB01D
GJM1555C1H9R3CB01D
GJM1555C1H9R3DB01D
GJM1555C1H9R4WB01D
GJM1555C1H9R4BB01D
GJM1555C1H9R4CB01D
GJM1555C1H9R4DB01D
GJM1555C1H9R5WB01D
GJM1555C1H9R5BB01D
GJM1555C1H9R5CB01D
GJM1555C1H9R5DB01D
GJM1555C1H9R6WB01D
GJM1555C1H9R6BB01D
GJM1555C1H9R6CB01D
GJM1555C1H9R6DB01D
GJM1555C1H9R7WB01D
GJM1555C1H9R7BB01D
GJM1555C1H9R7CB01D
GJM1555C1H9R7DB01D
GJM1555C1H9R8WB01D
GJM1555C1H9R8BB01D
GJM1555C1H9R8CB01D
GJM1555C1H9R8DB01D
GJM1555C1H9R9WB01D
GJM1555C1H9R9BB01D
GJM1555C1H9R9CB01D
GJM1555C1H9R9DB01D
1.0x0.5(15)<0402>0.6x0.3(03)<0201>
9.0pF(9R0)
9.1pF(9R1)
9.2pF(9R2)
9.3pF(9R3)
9.4pF(9R4)
9.5pF(9R5)
9.6pF(9R6)
9.7pF(9R7)
9.8pF(9R8)
9.9pF(9R9)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
Temperature Compensating Type C0G(5C)/C0H(6C) Characteristics
GJM0336C1E8R9WB01D
GJM0336C1E8R9BB01D
GJM0336C1E8R9CB01D
GJM0336C1E8R9DB01D
GJM1555C1H8R9WB01D
GJM1555C1H8R9BB01D
GJM1555C1H8R9CB01D
GJM1555C1H8R9DB01D
8.9pF(8R9)±0.05pF(W)
±0.1pF(B)
±0.25pF(C)
±0.5pF(D)
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
96
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
25(1E)
GJM0336C1E100GB01D
GJM0336C1E100JB01D
GJM0336C1E110GB01D
GJM0336C1E110JB01D
GJM0336C1E120GB01D
GJM0336C1E120JB01D
GJM0336C1E130GB01D
GJM0336C1E130JB01D
GJM0336C1E150GB01D
GJM0336C1E150JB01D
GJM0336C1E160GB01D
GJM0336C1E160JB01D
GJM0336C1E180GB01D
GJM0336C1E180JB01D
GJM0336C1E200GB01D
GJM0336C1E200JB01D
6.3(0J)
GJM0335C0J220GB01D
GJM0335C0J220JB01D
GJM0335C0J240GB01D
GJM0335C0J240JB01D
GJM0335C0J270GB01D
GJM0335C0J270JB01D
GJM0335C0J300GB01D
GJM0335C0J300JB01D
GJM0335C0J330GB01D
GJM0335C0J330JB01D
50(1H)
GJM1555C1H100GB01D
GJM1555C1H100JB01D
GJM1555C1H110GB01D
GJM1555C1H110JB01D
GJM1555C1H120GB01D
GJM1555C1H120JB01D
GJM1555C1H130GB01D
GJM1555C1H130JB01D
GJM1555C1H150GB01D
GJM1555C1H150JB01D
GJM1555C1H160GB01D
GJM1555C1H160JB01D
GJM1555C1H180GB01D
GJM1555C1H180JB01D
GJM1555C1H200GB01D
GJM1555C1H200JB01D
0.6x0.3(03)<0201> 1.0x0.5(15)<0402>
10pF(100)
11pF(110)
12pF(120)
13pF(130)
15pF(150)
16pF(160)
18pF(180)
20pF(200)
22pF(220)
24pF(240)
27pF(270)
30pF(300)
33pF(330)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
Temperature Compensating Type C0G(5C)/C0H(6C) Characteristics
GJ M 03 3 6C 1E 100 G B01 D
Packaging Code in Part Number shows STD 180mm Reel Taping.
qProduct ID wSeries eDimensions (LxW) rDimension (T)
tTemperature Characteristics yRated Voltage uCapacitance
iCapacitance Tolerance oIndividual Specification Code !0Packaging
(Part Number)
wq e r t y u i o !0
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
GJM Series Specifications and Test Methods (1)
!Note 1. This Specifications and Test Methods is downloaded from the website of Murata Manufacturing co.,ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice.
0. Please check with our sales representatives or product engineers before ordering.
2. This Specifications and Test Methods has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product
0. specifications before ordering.
See the previous pages.
Within the specified dimensions
No defects or abnormalities
10,000Mmin. or 500· F min. (whichever is smaller)
No defects or abnormalities
Y55 to W125D
Operating
Temperature Range
Rated Voltage
Appearance
Dimensions
Dielectric Strength
Insulation Resistance
(I.R.)
1
2
3
4
5
6
Using calipers
The insulation resistance should be measured with a DC
voltage not exceeding the rated voltage at 25Dand 75%RH
max. and within 2 minutes of charging.
No failure should be observed when 300% of the rated voltage
is applied between the terminations for 1 to 5 seconds,
provided the charge/discharge current is less than 50mA.
Visual inspection
The rated voltage is defined as the maximum voltage that may
be applied continuously to the capacitor.
When AC voltage is superimposed on DC voltage, VP-P or VO-P,
whichever is larger, should be maintained within the rated
voltage range.
Reference Temperature: 25D
(2C, 3C, 4C: 20D)
30pF and over: QU1000
30pF and below: QU400W20C
C: Nominal Capacitance (pF)
Within the specified tolerance
Capacitance
Q
7
8
The capacitance/Q should be measured at 25Dat the
frequency and voltage shown in the table.
Continued on the following page.
No removal of the terminations or other defect should occur.
Adhesive Strength
of Termination
10
Solder the capacitor to the test jig (glass epoxy board) shown in
Fig. 1 using a eutectic solder. Then apply a 5N* force in parallel
with the test jig for 10T1 sec. The soldering should be done either
with an iron or using the reflow method and should be conducted
with care so that the soldering is uniform and free of defects such
as heat shock. *2N (GJM03)
a
b
c
Baked electrode or
copper foil
Solder resist
Frequency 1T0.1MHz
Voltage 0.5 to 5Vrms
Within the specified tolerance (Table A)
Within T0.2% or T0.05pF
(whichever is larger.)
Temperature
Coefficient
Capacitance
Drift
Capacitance
Temperature
Characteristics
9
The capacitance change should be measured after 5 min. at
each specified temperature stage.
Temperature Compensating Type
The temperature coefficient is determined using the
capacitance measured in step 3 as a reference.
When cycling the temperature sequentially from step 1 through
5, (5C: W25 to 125D: other temp. coeffs.: W20 to 125D) the
capacitance should be within the specified tolerance for the
temperature coefficient and capacitance change as in Table A.
The capacitance drift is calculated by dividing the differences
between the maximum and minimum measured values in steps
1, 3 and 5 by the capacitance value in step 3.
Step
1
2
3
4
5
Reference Temp. T2
Y55T3
Reference Temp. T2
125T3
Reference Temp. T2
Temperature (D)
(in mm)
Fig. 1
Type a b c
GJM03
GJM15 0.3
0.4 0.9
1.5 0.3
0.5
No. Item Specifications Test Method
Temperature Compensating Type
GJM Series Specifications and Test Methods
97
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
!Note 1. This Specifications and Test Methods is downloaded from the website of Murata Manufacturing co.,ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice.
0. Please check with our sales representatives or product engineers before ordering.
2. This Specifications and Test Methods has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product
0. specifications before ordering.
GJM Series Specifications and Test Methods (1)
Continued from the preceding page.
Continued on the following page.
(in mm)
Fig. 2
Type a b c
GJM03
GJM15 0.3
0.4 0.9
1.5 0.3
0.5
75% of the terminations are to be soldered evenly and
continuously.
Solderability of
Termination
13
Immerse the capacitor in a solution of ethanol (JIS-K-8101) and
rosin (JIS-K-5902) (25% rosin in weight proportion).
Preheat at 80 to 120Dfor 10 to 30 seconds. After preheating,
immerse in eutectic solder solution for 2T0.5 seconds at 230T5D
or Sn-3.0Ag-0.5Cu solder solution for 2±0.5 seconds at 245±5°C.
More than 10,000Mor 500· F (whichever is smaller)
Within T2.5% or T0.25pF
(whichever is larger)
30pF and over: QU1000
30pF and below: QU400W20C
C: Nominal Capacitance (pF)
Appearance
I.R.
Capacitance
Change
Q
No marking defects
The measured and observed characteristics should satisfy the
specifications in the following table.
Resistance
to Soldering
Heat
14
Preheat the capacitor at 120 to 150Dfor 1 minute.
Immerse the capacitor in a eutectic solder or Sn-3.0Ag-0.5Cu
solder solution at 270T5Dfor 10T0.5 seconds.
Let sit at room temperature for 24T2 hours.
No failure
Dielectric
Strength
More than 10,000Mor 500· F (whichever is smaller)
Within T2.5% or T0.25pF
(whichever is larger)
30pF and over: QU1000
30pF and below: QU400W20C
C: Nominal Capacitance (pF)
Appearance
I.R.
Capacitance
Change
Q
No marking defects
The measured and observed characteristics should satisfy the
specifications in the following table.
Temperature
Cycle
15
Fix the capacitor to the supporting jig in the same manner and
under the same conditions as (10). Perform the five cycles
according to the four heat treatments listed in the following table.
Let sit for 24T2 hours at room temperature, then measure.
No failure
Dielectric
Strength
More than 10,000Mor 500· F (whichever is smaller)
Within T5% or T0.5pF
(whichever is larger)
30pF and below: QU350
10pF and over, 30pF and below: QU275WC
10pF and below: QU200W10C
C: Nominal Capacitance (pF)
5
2
Appearance
I.R.
Capacitance
Change
Q
No marking defects
The measured and observed characteristics should satisfy the
specifications in the following table.
Humidity,
Steady
State
16
Let the capacitor sit at 40T2Dand 90 to 95% humidity for
500T12 hours.
Remove and let sit for 24T2 hours (temperature compensating
type) at room temperature, then measure.
30pF and over: QU1000
30pF and below: QU400W20C
C: Nominal Capacitance (pF)
No defects or abnormalities
Within the specified tolerance
Vibration
Resistance
11
Solder the capacitor to the test jig (glass epoxy board) in the
same manner and under the same conditions as (10).
The capacitor should be subjected to a simple harmonic motion
having a total amplitude of 1.5mm, the frequency being varied
uniformly between the approximate limits of 10 and 55Hz.
The frequency range, from 10 to 55Hz and return to 10Hz,
should be traversed in approximately 1 minute. This motion
should be applied for a period of 2 hours in each of 3 mutually
perpendicular directions (total of 6 hours).
Appearance
Capacitance
Q
Deflection12
Solder the capacitor to the test jig (glass epoxy boards) shown
in Fig. 2 using a eutectic solder.
Then apply a force in the direction shown in Fig. 3.
The soldering
should
be done by the reflow method and
should
be conducted with care so that the soldering is uniform and free
of defects such as heat shock
.
YZ^ª«¯
VZ[§«¬
b
TUWXYZ[\]_`¥¦¨©ª«¬®°±
,
QRSUVWZ
]^
¢£¤¦§¨«
®¯
TUX¥¦©
,QTU¢¥¦
a
U¦
UY¦ª
c
VWZ[§¨«¬
Y]^ª®¯
100
Z]^«®¯
STW¤¥¨
40
φ4.5
Capacitance meter
Flexure : V1
20 50
R230
Pressurizing
speed: 1.0mm/sec.
Pressurize
45 45
Fig. 3
t: 0.8mm
Step 1234
Temp. (D)
Time (min.)
Min. Operating
Temp.W0/Y3
Room
Temp.
Max. Operating
Temp.W3/Y0Room
Temp.
30T32 to 3 30T32 to 3
No. Item Specifications Test Method
Temperature Compensating Type
(in mm)
Within T5% or T0.5pF
(whichever is larger)
Capacitance
Change
No marking defects
Appearance
GJM Series Specifications and Test Methods
98
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
!Note 1. This Specifications and Test Methods is downloaded from the website of Murata Manufacturing co.,ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice.
0. Please check with our sales representatives or product engineers before ordering.
2. This Specifications and Test Methods has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product
0. specifications before ordering.
GJM Series Specifications and Test Methods (1)
Continued from the preceding page.
*1: Nominal values denote the temperature coefficient within a range of 25 to 125D.
*2: Nominal values denote the temperature coefficient within a range of 20 to 125D.
(2)
5C
6C 0T30
0T60 0.25
0.38
0.40
0.60
0.58
0.87
Y0.11
Y0.21
Y0.17
Y0.33
Y0.24
Y0.48
Char. Code Temp. Coeff.
(ppm/D) *1
Capacitance Change from 25DValue (%)
Max. Min.
Y30DY10D
Max. Min.
Table A
(1)
Y55D
Max. Min.
2C
3C
4C
0T60
0T120
0T250
0.33
0.55
1.02
0.49
0.82
1.54
0.82
1.37
2.56
Y0.18
Y0.36
Y0.75
Y0.27
Y0.54
Y1.13
Y0.45
Y0.90
Y1.88
Char. Nominal Values
(ppm/D) *2
Capacitance Change from 20DValue (%)
Max. Min.
Y25DY10D
Max. Min.
Y55D
Max. Min.
No. Item Specifications Test Method
Temperature Compensating Type
More than 500Mor 25· F (whichever is smaller)
Within T7.5% or T0.75pF
(whichever is larger)
30pF and over: QU200
30pF and below: QU100WC
C: Nominal Capacitance (pF)
10
3
Appearance
I.R.
Capacitance
Change
Q
No marking defects
The measured and observed characteristics should satisfy the
specifications in the following table.
Humidity
Load
17
Apply the rated voltage at 40T2Dand 90 to 95% humidity for
500T12 hours.
Remove and let sit for 24T2 hours at room temperature, then
measure. The charge/discharge current is less than 50mA.
More than 1,000Mor 50· F (whichever is smaller)
0.1pFVCV1pF: 350m· pF below
1pFFCV5pF: 300mbelow
5pFFCV10pF: 250mbelow
10pFFCV33pF: 400mbelow
The ESR should be measured at room temperature, and
frequency 1T0.2GHz with the equivalent of BOONTON Model
34A.
The ESR should be measured at room temperature, and
frequency 500T50MHz with the equivalent of HP8753B.
Within T3% or T0.3pF
(whichever is larger)
30pF and over: QU350
10pF and over, 30pF and below: QU275WC
10pF and below: QU200W10C
C: Nominal Capacitance (pF)
5
2
Appearance
I.R.
Capacitance
Change
Q
No marking defects
The measured and observed characteristics should satisfy the
specifications in the following table.
High
Temperature
Load
ESR
18
19
Apply 200% of the rated voltage for 1000T12 hours at the
maximum operating temperature T3D. Let sit for 24T2 hours
(temperature compensating type) at room temperature, then
measure.
The charge/discharge current is less than 50mA.
GJM Series Specifications and Test Methods
99
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
100
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Chip Monolithic Ceramic Capacitors
High Frequency GQM Series
Features
1. HiQ and low ESR at VHF, UHF, Microwave
2. Feature improvement, low power consumption for
mobile telecommunication. (Base station, terminal,
etc.)
Applications
High frequency circuit (Mobile telecommunication, etc.)
L
T
Part Number LW T
Dimensions (mm) e g min.
1.6 ±0.1 0.8 ±0.1 0.2 to 0.5 0.50.8 ±0.1
GQM188 1.6 ±0.15 0.8 ±0.15 0.2 to 0.5 0.50.7 ±0.1
GQM187
2.0 ±0.1 1.25 ±0.1 0.2 to 0.7 0.70.85 ±0.1
GQM219
(50,100V)
2.0 ±0.15 1.25 ±0.15 0.2 to 0.7 0.70.85 ±0.15
GQM219 (250V)2.8 ±0.5 2.8 ±0.4 0.3 min. 1.01.15 ±0.2
GQM22M
W
e eg
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
101
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Capacitance Table
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
Temperature Compensating Type C0G(5C) Characteristics
7ex.7: T Dimension [mm]
LxW
[mm]
Rated Voltage
[Vdc]
Capacitance
0.10pF(R10)
0.20pF(R20)
0.30pF(R30)
0.40pF(R40)
0.50pF(R50)
0.75pF(R75)
1.0pF(1R0)
1.1pF(1R1)
1.2pF(1R2)
1.3pF(1R3)
1.5pF(1R5)
1.6pF(1R6)
1.8pF(1R8)
2.0pF(2R0)
2.2pF(2R2)
2.4pF(2R4)
2.7pF(2R7)
3.0pF(3R0)
3.3pF(3R3)
3.6pF(3R6)
3.9pF(3R9)
4.0pF(4R0)
4.3pF(4R3)
4.7pF(4R7)
5.0pF(5R0)
5.1pF(5R1)
5.6pF(5R6)
6.0pF(6R0)
6.2pF(6R2)
6.8pF(6R8)
7.0pF(7R0)
7.5pF(7R5)
8.0pF(8R0)
8.2pF(8R2)
9.0pF(9R0)
9.1pF(9R1)
10pF(100)
11pF(110)
12pF(120)
13pF(130)
15pF(150)
16pF(160)
18pF(180)
20pF(200)
22pF(220)
24pF(240)
27pF(270)
30pF(300)
33pF(330)
LxW
[mm]
Rated Voltage
[Vdc]
Capacitance
36pF(360)
39pF(390)
43pF(430)
47pF(470)
51pF(510)
56pF(560)
62pF(620)
68pF(680)
75pF(750)
82pF(820)
91pF(910)
100pF(101)
1.6x0.8
(18)
<0603>
2.0x1.25
(21)
<0805>
250
(2E)100
(2A)50
(1H)250
(2E)100
(2A)50
(1H)
1.6x0.8
(18)
<0603>
2.0x1.25
(21)
<0805>
250
(2E)100
(2A)50
(1H)250
(2E)100
(2A)50
(1H)
2.0x2.5
(22)
<0810>
500
(2H)
2.0x2.5
(22)
<0810>
500
(2H)
7
7
7
7
8
8
8
8
8
8
8
8
8
8
8
8
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
M
M
M
M
M
M
M
M
M
M
M
M
9
9
9
9
9
9
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
102
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
250(2E)
GQM1875C2ER10BB12D
GQM1875C2ER20BB12D
GQM1875C2ER30BB12D
GQM1875C2ER30CB12D
GQM1875C2ER40BB12D
GQM1875C2ER40CB12D
GQM1875C2ER50BB12D
GQM1875C2ER50CB12D
GQM1875C2ER75BB12D
GQM1875C2ER75CB12D
GQM1875C2E1R0BB12D
GQM1875C2E1R0CB12D
GQM1875C2E1R1BB12D
GQM1875C2E1R1CB12D
GQM1875C2E1R2BB12D
GQM1875C2E1R2CB12D
GQM1875C2E1R3BB12D
GQM1875C2E1R3CB12D
GQM1875C2E1R5BB12D
GQM1875C2E1R5CB12D
GQM1875C2E1R6BB12D
GQM1875C2E1R6CB12D
GQM1875C2E1R8BB12D
GQM1875C2E1R8CB12D
GQM1875C2E2R0BB12D
GQM1875C2E2R0CB12D
GQM1875C2E2R2BB12D
GQM1875C2E2R2CB12D
GQM1875C2E2R4BB12D
GQM1875C2E2R4CB12D
GQM1875C2E2R7BB12D
GQM1875C2E2R7CB12D
GQM1875C2E3R0BB12D
GQM1875C2E3R0CB12D
GQM1875C2E3R3BB12D
GQM1875C2E3R3CB12D
GQM1875C2E3R6BB12D
GQM1875C2E3R6CB12D
GQM1875C2E3R9BB12D
GQM1875C2E3R9CB12D
GQM1875C2E4R0BB12D
GQM1875C2E4R0CB12D
GQM1875C2E4R3BB12D
GQM1875C2E4R3CB12D
GQM1875C2E4R7BB12D
GQM1875C2E4R7CB12D
GQM1875C2E5R0BB12D
GQM1875C2E5R0CB12D
100(2A)
GQM1885C2AR50BB01D
GQM1885C2AR50CB01D
GQM1885C2AR75BB01D
GQM1885C2AR75CB01D
GQM1885C2A1R0BB01D
GQM1885C2A1R0CB01D
GQM1885C2A1R1BB01D
GQM1885C2A1R1CB01D
GQM1885C2A1R2BB01D
GQM1885C2A1R2CB01D
GQM1885C2A1R3BB01D
GQM1885C2A1R3CB01D
GQM1885C2A1R5BB01D
GQM1885C2A1R5CB01D
GQM1885C2A1R6BB01D
GQM1885C2A1R6CB01D
GQM1885C2A1R8BB01D
GQM1885C2A1R8CB01D
GQM1885C2A2R0BB01D
GQM1885C2A2R0CB01D
GQM1885C2A2R2BB01D
GQM1885C2A2R2CB01D
GQM1885C2A2R4BB01D
GQM1885C2A2R4CB01D
GQM1885C2A2R7BB01D
GQM1885C2A2R7CB01D
GQM1885C2A3R0BB01D
GQM1885C2A3R0CB01D
GQM1885C2A3R3BB01D
GQM1885C2A3R3CB01D
GQM1885C2A3R6BB01D
GQM1885C2A3R6CB01D
GQM1885C2A3R9BB01D
GQM1885C2A3R9CB01D
GQM1885C2A4R0BB01D
GQM1885C2A4R0CB01D
GQM1885C2A4R3BB01D
GQM1885C2A4R3CB01D
GQM1885C2A4R7BB01D
GQM1885C2A4R7CB01D
GQM1885C2A5R0BB01D
GQM1885C2A5R0CB01D
1.6x0.8(18)<0603>
0.10pF(R10)
0.20pF(R20)
0.30pF(R30)
0.40pF(R40)
0.50pF(R50)
0.75pF(R75)
1.0pF(1R0)
1.1pF(1R1)
1.2pF(1R2)
1.3pF(1R3)
1.5pF(1R5)
1.6pF(1R6)
1.8pF(1R8)
2.0pF(2R0)
2.2pF(2R2)
2.4pF(2R4)
2.7pF(2R7)
3.0pF(3R0)
3.3pF(3R3)
3.6pF(3R6)
3.9pF(3R9)
4.0pF(4R0)
4.3pF(4R3)
4.7pF(4R7)
5.0pF(5R0)
±0.1pF(B)
±0.1pF(B)
±0.1pF(B)
±0.25pF(C)
±0.1pF(B)
±0.25pF(C)
±0.1pF(B)
±0.25pF(C)
±0.1pF(B)
±0.25pF(C)
±0.1pF(B)
±0.25pF(C)
±0.1pF(B)
±0.25pF(C)
±0.1pF(B)
±0.25pF(C)
±0.1pF(B)
±0.25pF(C)
±0.1pF(B)
±0.25pF(C)
±0.1pF(B)
±0.25pF(C)
±0.1pF(B)
±0.25pF(C)
±0.1pF(B)
±0.25pF(C)
±0.1pF(B)
±0.25pF(C)
±0.1pF(B)
±0.25pF(C)
±0.1pF(B)
±0.25pF(C)
±0.1pF(B)
±0.25pF(C)
±0.1pF(B)
±0.25pF(C)
±0.1pF(B)
±0.25pF(C)
±0.1pF(B)
±0.25pF(C)
±0.1pF(B)
±0.25pF(C)
±0.1pF(B)
±0.25pF(C)
±0.1pF(B)
±0.25pF(C)
±0.1pF(B)
±0.25pF(C)
Temperature Compensating Type C0G(5C) Characteristics
GQ M 18 7 5C 2E R10 B B12 D
Packaging Code in Part Number shows STD 180mm Reel Taping.
qProduct ID wSeries eDimensions (LxW) rDimension (T)
tTemperature Characteristics yRated Voltage uCapacitance
iCapacitance Tolerance oIndividual Specification Code !0Packaging
(Part Number)
wq e r t y u i o !0
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
103
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
250(2E)
GQM1875C2E5R1CB12D
GQM1875C2E5R1DB12D
GQM1875C2E5R6CB12D
GQM1875C2E5R6DB12D
GQM1875C2E6R0CB12D
GQM1875C2E6R0DB12D
GQM1875C2E6R2CB12D
GQM1875C2E6R2DB12D
GQM1875C2E6R8CB12D
GQM1875C2E6R8DB12D
GQM1875C2E7R0CB12D
GQM1875C2E7R0DB12D
GQM1875C2E7R5CB12D
GQM1875C2E7R5DB12D
GQM1875C2E8R0CB12D
GQM1875C2E8R0DB12D
GQM1875C2E8R2CB12D
GQM1875C2E8R2DB12D
GQM1875C2E9R0CB12D
GQM1875C2E9R0DB12D
GQM1875C2E9R1CB12D
GQM1875C2E9R1DB12D
GQM1875C2E100GB12D
GQM1875C2E100JB12D
GQM1875C2E110GB12D
GQM1875C2E110JB12D
GQM1875C2E120GB12D
GQM1875C2E120JB12D
GQM1875C2E130GB12D
GQM1875C2E130JB12D
GQM1875C2E150GB12D
GQM1875C2E150JB12D
GQM1875C2E160GB12D
GQM1875C2E160JB12D
GQM1875C2E180GB12D
GQM1875C2E180JB12D
GQM1875C2E200GB12D
GQM1875C2E200JB12D
GQM1875C2E220GB12D
GQM1875C2E220JB12D
GQM1875C2E240GB12D
GQM1875C2E240JB12D
GQM1875C2E270GB12D
GQM1875C2E270JB12D
GQM1875C2E300GB12D
GQM1875C2E300JB12D
100(2A)
GQM1885C2A5R1CB01D
GQM1885C2A5R1DB01D
GQM1885C2A5R6CB01D
GQM1885C2A5R6DB01D
GQM1885C2A6R0CB01D
GQM1885C2A6R0DB01D
GQM1885C2A6R2CB01D
GQM1885C2A6R2DB01D
GQM1885C2A6R8CB01D
GQM1885C2A6R8DB01D
50(1H)
GQM1885C1H7R0CB01D
GQM1885C1H7R0DB01D
GQM1885C1H7R5CB01D
GQM1885C1H7R5DB01D
GQM1885C1H8R0CB01D
GQM1885C1H8R0DB01D
GQM1885C1H8R2CB01D
GQM1885C1H8R2DB01D
GQM1885C1H9R0CB01D
GQM1885C1H9R0DB01D
GQM1885C1H9R1CB01D
GQM1885C1H9R1DB01D
GQM1885C1H100GB01D
GQM1885C1H100JB01D
GQM1885C1H110GB01D
GQM1885C1H110JB01D
GQM1885C1H120GB01D
GQM1885C1H120JB01D
GQM1885C1H130GB01D
GQM1885C1H130JB01D
GQM1885C1H150GB01D
GQM1885C1H150JB01D
GQM1885C1H160GB01D
GQM1885C1H160JB01D
GQM1885C1H180GB01D
GQM1885C1H180JB01D
GQM1885C1H200GB01D
GQM1885C1H200JB01D
GQM1885C1H220GB01D
GQM1885C1H220JB01D
GQM1885C1H240GB01D
GQM1885C1H240JB01D
GQM1885C1H270GB01D
GQM1885C1H270JB01D
GQM1885C1H300GB01D
GQM1885C1H300JB01D
1.6x0.8(18)<0603>
5.1pF(5R1)
5.6pF(5R6)
6.0pF(6R0)
6.2pF(6R2)
6.8pF(6R8)
7.0pF(7R0)
7.5pF(7R5)
8.0pF(8R0)
8.2pF(8R2)
9.0pF(9R0)
9.1pF(9R1)
10pF(100)
11pF(110)
12pF(120)
13pF(130)
15pF(150)
16pF(160)
18pF(180)
20pF(200)
22pF(220)
24pF(240)
27pF(270)
30pF(300)
±0.25pF(C)
±0.5pF(D)
±0.25pF(C)
±0.5pF(D)
±0.25pF(C)
±0.5pF(D)
±0.25pF(C)
±0.5pF(D)
±0.25pF(C)
±0.5pF(D)
±0.25pF(C)
±0.5pF(D)
±0.25pF(C)
±0.5pF(D)
±0.25pF(C)
±0.5pF(D)
±0.25pF(C)
±0.5pF(D)
±0.25pF(C)
±0.5pF(D)
±0.25pF(C)
±0.5pF(D)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
Temperature Compensating Type C0G(5C) Characteristics
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
104
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
250(2E)
GQM1875C2E330GB12D
GQM1875C2E330JB12D
GQM1875C2E360GB12D
GQM1875C2E360JB12D
GQM1875C2E390GB12D
GQM1875C2E390JB12D
GQM1875C2E430GB12D
GQM1875C2E430JB12D
GQM1875C2E470GB12D
GQM1875C2E470JB12D
50(1H)
GQM1885C1H330GB01D
GQM1885C1H330JB01D
GQM1885C1H360GB01D
GQM1885C1H360JB01D
GQM1885C1H390GB01D
GQM1885C1H390JB01D
GQM1885C1H430GB01D
GQM1885C1H430JB01D
GQM1885C1H470GB01D
GQM1885C1H470JB01D
GQM1885C1H510GB01D
GQM1885C1H510JB01D
GQM1885C1H560GB01D
GQM1885C1H560JB01D
GQM1885C1H620GB01D
GQM1885C1H620JB01D
GQM1885C1H680GB01D
GQM1885C1H680JB01D
GQM1885C1H750GB01D
GQM1885C1H750JB01D
GQM1885C1H820GB01D
GQM1885C1H820JB01D
GQM1885C1H910GB01D
GQM1885C1H910JB01D
GQM1885C1H101GB01D
GQM1885C1H101JB01D
1.6x0.8(18)<0603>
33pF(330)
36pF(360)
39pF(390)
43pF(430)
47pF(470)
51pF(510)
56pF(560)
62pF(620)
68pF(680)
75pF(750)
82pF(820)
91pF(910)
100pF(101)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
Temperature Compensating Type C0G(5C) Characteristics
Packaging Code in Part Number shows STD 180mm Reel Taping.
qProduct ID wSeries eDimensions (LxW) rDimension (T)
tTemperature Characteristics yRated Voltage uCapacitance
iCapacitance Tolerance oIndividual Specification Code !0Packaging
(Part Number)
wq e r t y u i o !0
GQ M 18 7 5C 2E 330 G B12 D
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
105
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
250(2E)
GQM2195C2ER50BB12D
GQM2195C2ER50CB12D
GQM2195C2ER75BB12D
GQM2195C2ER75CB12D
GQM2195C2E1R0BB12D
GQM2195C2E1R0CB12D
GQM2195C2E1R1BB12D
GQM2195C2E1R1CB12D
GQM2195C2E1R2BB12D
GQM2195C2E1R2CB12D
GQM2195C2E1R3BB12D
GQM2195C2E1R3CB12D
GQM2195C2E1R5BB12D
GQM2195C2E1R5CB12D
GQM2195C2E1R6BB12D
GQM2195C2E1R6CB12D
GQM2195C2E1R8BB12D
GQM2195C2E1R8CB12D
GQM2195C2E2R0BB12D
GQM2195C2E2R0CB12D
GQM2195C2E2R2BB12D
GQM2195C2E2R2CB12D
GQM2195C2E2R4BB12D
GQM2195C2E2R4CB12D
GQM2195C2E2R7BB12D
GQM2195C2E2R7CB12D
GQM2195C2E3R0BB12D
GQM2195C2E3R0CB12D
GQM2195C2E3R3BB12D
GQM2195C2E3R3CB12D
GQM2195C2E3R6BB12D
GQM2195C2E3R6CB12D
GQM2195C2E3R9BB12D
GQM2195C2E3R9CB12D
GQM2195C2E4R0BB12D
GQM2195C2E4R0CB12D
GQM2195C2E4R3BB12D
GQM2195C2E4R3CB12D
GQM2195C2E4R7BB12D
GQM2195C2E4R7CB12D
GQM2195C2E5R0BB12D
GQM2195C2E5R0CB12D
GQM2195C2E5R1CB12D
GQM2195C2E5R1DB12D
GQM2195C2E5R6CB12D
GQM2195C2E5R6DB12D
GQM2195C2E6R0CB12D
GQM2195C2E6R0DB12D
100(2A) 500(2H)
GQM2195C2AR50BB01D
GQM2195C2AR50CB01D
GQM2195C2AR75BB01D
GQM2195C2AR75CB01D
GQM2195C2A1R0BB01D
GQM2195C2A1R0CB01D
GQM2195C2A1R1BB01D
GQM2195C2A1R1CB01D
GQM2195C2A1R2BB01D
GQM2195C2A1R2CB01D
GQM2195C2A1R3BB01D
GQM2195C2A1R3CB01D
GQM2195C2A1R5BB01D
GQM2195C2A1R5CB01D
GQM2195C2A1R6BB01D
GQM2195C2A1R6CB01D
GQM2195C2A1R8BB01D
GQM2195C2A1R8CB01D
GQM2195C2A2R0BB01D
GQM2195C2A2R0CB01D
GQM2195C2A2R2BB01D
GQM2195C2A2R2CB01D
GQM2195C2A2R4BB01D
GQM2195C2A2R4CB01D
GQM2195C2A2R7BB01D
GQM2195C2A2R7CB01D
GQM2195C2A3R0BB01D
GQM2195C2A3R0CB01D
GQM2195C2A3R3BB01D
GQM2195C2A3R3CB01D
GQM2195C2A3R6BB01D
GQM2195C2A3R6CB01D
GQM2195C2A3R9BB01D
GQM2195C2A3R9CB01D
GQM2195C2A4R0BB01D
GQM2195C2A4R0CB01D
GQM2195C2A4R3BB01D
GQM2195C2A4R3CB01D
GQM2195C2A4R7BB01D
GQM2195C2A4R7CB01D
GQM2195C2A5R0BB01D
GQM2195C2A5R0CB01D
GQM2195C2A5R1CB01D
GQM2195C2A5R1DB01D
GQM2195C2A5R6CB01D
GQM2195C2A5R6DB01D
GQM2195C2A6R0CB01D
GQM2195C2A6R0DB01D
GQM22M5C2HR50BB01L
GQM22M5C2HR50CB01L
GQM22M5C2HR75BB01L
GQM22M5C2HR75CB01L
GQM22M5C2H1R0BB01L
GQM22M5C2H1R0CB01L
GQM22M5C2H1R1BB01L
GQM22M5C2H1R1CB01L
GQM22M5C2H1R2BB01L
GQM22M5C2H1R2CB01L
GQM22M5C2H1R3BB01L
GQM22M5C2H1R3CB01L
GQM22M5C2H1R5BB01L
GQM22M5C2H1R5CB01L
GQM22M5C2H1R6BB01L
GQM22M5C2H1R6CB01L
GQM22M5C2H1R8BB01L
GQM22M5C2H1R8CB01L
GQM22M5C2H2R0BB01L
GQM22M5C2H2R0CB01L
GQM22M5C2H2R2BB01L
GQM22M5C2H2R2CB01L
GQM22M5C2H2R4BB01L
GQM22M5C2H2R4CB01L
GQM22M5C2H2R7BB01L
GQM22M5C2H2R7CB01L
GQM22M5C2H3R0BB01L
GQM22M5C2H3R0CB01L
GQM22M5C2H3R3BB01L
GQM22M5C2H3R3CB01L
GQM22M5C2H3R6BB01L
GQM22M5C2H3R6CB01L
GQM22M5C2H3R9BB01L
GQM22M5C2H3R9CB01L
GQM22M5C2H4R0BB01L
GQM22M5C2H4R0CB01L
GQM22M5C2H4R3BB01L
GQM22M5C2H4R3CB01L
GQM22M5C2H4R7BB01L
GQM22M5C2H4R7CB01L
GQM22M5C2H5R0BB01L
GQM22M5C2H5R0CB01L
GQM22M5C2H5R1CB01L
GQM22M5C2H5R1DB01L
GQM22M5C2H5R6CB01L
GQM22M5C2H5R6DB01L
GQM22M5C2H6R0CB01L
GQM22M5C2H6R0DB01L
2.0x1.25(21)<0805> 2.8x2.8(22)<1111>
0.50pF(R50)
0.75pF(R75)
1.0pF(1R0)
1.1pF(1R1)
1.2pF(1R2)
1.3pF(1R3)
1.5pF(1R5)
1.6pF(1R6)
1.8pF(1R8)
2.0pF(2R0)
2.2pF(2R2)
2.4pF(2R4)
2.7pF(2R7)
3.0pF(3R0)
3.3pF(3R3)
3.6pF(3R6)
3.9pF(3R9)
4.0pF(4R0)
4.3pF(4R3)
4.7pF(4R7)
5.0pF(5R0)
5.1pF(5R1)
5.6pF(5R6)
6.0pF(6R0)
±0.1pF(B)
±0.25pF(C)
±0.1pF(B)
±0.25pF(C)
±0.1pF(B)
±0.25pF(C)
±0.1pF(B)
±0.25pF(C)
±0.1pF(B)
±0.25pF(C)
±0.1pF(B)
±0.25pF(C)
±0.1pF(B)
±0.25pF(C)
±0.1pF(B)
±0.25pF(C)
±0.1pF(B)
±0.25pF(C)
±0.1pF(B)
±0.25pF(C)
±0.1pF(B)
±0.25pF(C)
±0.1pF(B)
±0.25pF(C)
±0.1pF(B)
±0.25pF(C)
±0.1pF(B)
±0.25pF(C)
±0.1pF(B)
±0.25pF(C)
±0.1pF(B)
±0.25pF(C)
±0.1pF(B)
±0.25pF(C)
±0.1pF(B)
±0.25pF(C)
±0.1pF(B)
±0.25pF(C)
±0.1pF(B)
±0.25pF(C)
±0.1pF(B)
±0.25pF(C)
±0.25pF(C)
±0.5pF(D)
±0.25pF(C)
±0.5pF(D)
±0.25pF(C)
±0.5pF(D)
Temperature Compensating Type C0G(5C) Characteristics
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
106
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
250(2E)
GQM2195C2E6R2CB12D
GQM2195C2E6R2DB12D
GQM2195C2E6R8CB12D
GQM2195C2E6R8DB12D
GQM2195C2E7R0CB12D
GQM2195C2E7R0DB12D
GQM2195C2E7R5CB12D
GQM2195C2E7R5DB12D
GQM2195C2E8R0CB12D
GQM2195C2E8R0DB12D
GQM2195C2E8R2CB12D
GQM2195C2E8R2DB12D
GQM2195C2E9R0CB12D
GQM2195C2E9R0DB12D
GQM2195C2E9R1CB12D
GQM2195C2E9R1DB12D
GQM2195C2E100GB12D
GQM2195C2E100JB12D
GQM2195C2E110GB12D
GQM2195C2E110JB12D
GQM2195C2E120GB12D
GQM2195C2E120JB12D
GQM2195C2E130GB12D
GQM2195C2E130JB12D
GQM2195C2E150GB12D
GQM2195C2E150JB12D
GQM2195C2E160GB12D
GQM2195C2E160JB12D
GQM2195C2E180GB12D
GQM2195C2E180JB12D
GQM2195C2E200GB12D
GQM2195C2E200JB12D
GQM2195C2E220GB12D
GQM2195C2E220JB12D
GQM2195C2E240GB12D
GQM2195C2E240JB12D
GQM2195C2E270GB12D
GQM2195C2E270JB12D
GQM2195C2E300GB12D
GQM2195C2E300JB12D
GQM2195C2E330GB12D
GQM2195C2E330JB12D
GQM2195C2E360GB12D
GQM2195C2E360JB12D
GQM2195C2E390GB12D
GQM2195C2E390JB12D
100(2A)
GQM2195C2A6R2CB01D
GQM2195C2A6R2DB01D
GQM2195C2A6R8CB01D
GQM2195C2A6R8DB01D
GQM2195C2A7R0CB01D
GQM2195C2A7R0DB01D
GQM2195C2A7R5CB01D
GQM2195C2A7R5DB01D
GQM2195C2A8R0CB01D
GQM2195C2A8R0DB01D
GQM2195C2A8R2CB01D
GQM2195C2A8R2DB01D
GQM2195C2A9R0CB01D
GQM2195C2A9R0DB01D
GQM2195C2A9R1CB01D
GQM2195C2A9R1DB01D
GQM2195C2A100GB01D
GQM2195C2A100JB01D
GQM2195C2A110GB01D
GQM2195C2A110JB01D
GQM2195C2A120GB01D
GQM2195C2A120JB01D
GQM2195C2A130GB01D
GQM2195C2A130JB01D
GQM2195C2A150GB01D
GQM2195C2A150JB01D
GQM2195C2A160GB01D
GQM2195C2A160JB01D
GQM2195C2A180GB01D
GQM2195C2A180JB01D
50(1H) 500(2H)
GQM2195C1H200GB01D
GQM2195C1H200JB01D
GQM2195C1H220GB01D
GQM2195C1H220JB01D
GQM2195C1H240GB01D
GQM2195C1H240JB01D
GQM2195C1H270GB01D
GQM2195C1H270JB01D
GQM2195C1H300GB01D
GQM2195C1H300JB01D
GQM2195C1H330GB01D
GQM2195C1H330JB01D
GQM2195C1H360GB01D
GQM2195C1H360JB01D
GQM2195C1H390GB01D
GQM2195C1H390JB01D
GQM22M5C2H6R2CB01L
GQM22M5C2H6R2DB01L
GQM22M5C2H6R8CB01L
GQM22M5C2H6R8DB01L
GQM22M5C2H7R0CB01L
GQM22M5C2H7R0DB01L
GQM22M5C2H7R5CB01L
GQM22M5C2H7R5DB01L
GQM22M5C2H8R0CB01L
GQM22M5C2H8R0DB01L
GQM22M5C2H8R2CB01L
GQM22M5C2H8R2DB01L
GQM22M5C2H9R0CB01L
GQM22M5C2H9R0DB01L
GQM22M5C2H9R1CB01L
GQM22M5C2H9R1DB01L
GQM22M5C2H100GB01L
GQM22M5C2H100JB01L
GQM22M5C2H110GB01L
GQM22M5C2H110JB01L
GQM22M5C2H120GB01L
GQM22M5C2H120JB01L
GQM22M5C2H130GB01L
GQM22M5C2H130JB01L
GQM22M5C2H150GB01L
GQM22M5C2H150JB01L
GQM22M5C2H160GB01L
GQM22M5C2H160JB01L
GQM22M5C2H180GB01L
GQM22M5C2H180JB01L
GQM22M5C2H200GB01L
GQM22M5C2H200JB01L
GQM22M5C2H220GB01L
GQM22M5C2H220JB01L
GQM22M5C2H240GB01L
GQM22M5C2H240JB01L
GQM22M5C2H270GB01L
GQM22M5C2H270JB01L
GQM22M5C2H300GB01L
GQM22M5C2H300JB01L
GQM22M5C2H330GB01L
GQM22M5C2H330JB01L
GQM22M5C2H360GB01L
GQM22M5C2H360JB01L
GQM22M5C2H390GB01L
GQM22M5C2H390JB01L
2.0x1.25(21)<0805> 2.8x2.8(22)<1111>
6.2pF(6R2)
6.8pF(6R8)
7.0pF(7R0)
7.5pF(7R5)
8.0pF(8R0)
8.2pF(8R2)
9.0pF(9R0)
9.1pF(9R1)
10pF(100)
11pF(110)
12pF(120)
13pF(130)
15pF(150)
16pF(160)
18pF(180)
20pF(200)
22pF(220)
24pF(240)
27pF(270)
30pF(300)
33pF(330)
36pF(360)
39pF(390)
±0.25pF(C)
±0.5pF(D)
±0.25pF(C)
±0.5pF(D)
±0.25pF(C)
±0.5pF(D)
±0.25pF(C)
±0.5pF(D)
±0.25pF(C)
±0.5pF(D)
±0.25pF(C)
±0.5pF(D)
±0.25pF(C)
±0.5pF(D)
±0.25pF(C)
±0.5pF(D)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
Temperature Compensating Type C0G(5C) Characteristics
Packaging Code in Part Number shows STD 180mm Reel Taping.
qProduct ID wSeries eDimensions (LxW) rDimension (T)
tTemperature Characteristics yRated Voltage uCapacitance
iCapacitance Tolerance oIndividual Specification Code !0Packaging
(Part Number)
wq e r t y u i o !0
GQ M 21 9 5C 2E 6R2 C B12 D
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
107
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
250(2E)
GQM2195C2E430GB12D
GQM2195C2E430JB12D
GQM2195C2E470GB12D
GQM2195C2E470JB12D
GQM2195C2E510GB12D
GQM2195C2E510JB12D
GQM2195C2E560GB12D
GQM2195C2E560JB12D
GQM2195C2E620GB12D
GQM2195C2E620JB12D
GQM2195C2E680GB12D
GQM2195C2E680JB12D
GQM2195C2E750GB12D
GQM2195C2E750JB12D
GQM2195C2E820GB12D
GQM2195C2E820JB12D
GQM2195C2E910GB12D
GQM2195C2E910JB12D
GQM2195C2E101GB12D
GQM2195C2E101JB12D
50(1H) 500(2H)
GQM2195C1H430GB01D
GQM2195C1H430JB01D
GQM2195C1H470GB01D
GQM2195C1H470JB01D
GQM2195C1H510GB01D
GQM2195C1H510JB01D
GQM2195C1H560GB01D
GQM2195C1H560JB01D
GQM2195C1H620GB01D
GQM2195C1H620JB01D
GQM2195C1H680GB01D
GQM2195C1H680JB01D
GQM2195C1H750GB01D
GQM2195C1H750JB01D
GQM2195C1H820GB01D
GQM2195C1H820JB01D
GQM2195C1H910GB01D
GQM2195C1H910JB01D
GQM2195C1H101GB01D
GQM2195C1H101JB01D
GQM22M5C2H430GB01L
GQM22M5C2H430JB01L
GQM22M5C2H470GB01L
GQM22M5C2H470JB01L
GQM22M5C2H510GB01L
GQM22M5C2H510JB01L
GQM22M5C2H560GB01L
GQM22M5C2H560JB01L
GQM22M5C2H620GB01L
GQM22M5C2H620JB01L
GQM22M5C2H680GB01L
GQM22M5C2H680JB01L
GQM22M5C2H750GB01L
GQM22M5C2H750JB01L
GQM22M5C2H820GB01L
GQM22M5C2H820JB01L
GQM22M5C2H910GB01L
GQM22M5C2H910JB01L
GQM22M5C2H101GB01L
GQM22M5C2H101JB01L
2.0x1.25(21)<0805> 2.8x2.8(22)<1111>
43pF(430)
47pF(470)
51pF(510)
56pF(560)
62pF(620)
68pF(680)
75pF(750)
82pF(820)
91pF(910)
100pF(101)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
±2%(G)
±5%(J)
Temperature Compensating Type C0G(5C) Characteristics
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
!Note 1. This Specifications and Test Methods is downloaded from the website of Murata Manufacturing co.,ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice.
0. Please check with our sales representatives or product engineers before ordering.
2. This Specifications and Test Methods has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product
0. specifications before ordering.
GQM Series Specifications and Test Methods
See the previous page.
Within the specified dimensions
No defects or abnormalities
More than 10,000M
No defects or abnormalities
Y55 to 125D
Operating
Temperature
Rated Voltage
Appearance
Dimension
Dielectric Strength
Insulation Resistance
1
2
3
4
5
6
Using calipers
The insulation resistance should be measured with a DC
voltage not exceeding the rated voltage at 25Dand 75%RH
max. and within 2 minutes of charging, provided the
charge/discharge current is less than 50mA.
No failure should be observed when 300%of the rated voltage
is applied between the terminations for 1 to 5 seconds,
provided the charge/discharge current is less than 50mA.
GQM187, GQM219(250V), GQM22: 250% of the rated voltage
Visual inspection
The rated voltage is defined as the maximum voltage that may
be applied continuously to the capacitor.
When AC voltage is superimposed on DC voltage, VP-P or VO-P,
whichever is larger, should be maintained within the rated
voltage range.
Reference Temperature: 25D
Item
No. Test Method
Specifications
30pF and over: QU1400
30pF and below: QU800W20C
C: Nominal Capacitance (pF)
Within the specified tolerance
Capacitance
Q
7
8
The capacitance/Q should be measured at 25Dat the
frequency and voltage shown in the table.
Continued on the following page.
No removal of the terminations or other defect should occur.
Adhesive Strength
of Termination
10
Solder the capacitor to the test jig (glass epoxy board) shown in
Fig. 1 using a eutectic solder. Then apply 10N* force in parallel
with the test jig for 10T1 sec.
The soldering should be done either with an iron or using the
reflow method and should be conducted with care so that the
soldering is uniform and free of defects such as heat shock.
*5N (GQM188)
a
b
c
Baked electrode or
copper foil
Solder resist
30pF and over: QU1400
30pF and below: QU800W20C
C: Nominal Capacitance (pF)
No defects or abnormalities
Within the specified tolerance
Vibration
Resistance
11
Solder the capacitor to the test jig (glass epoxy board) in the
same manner and under the same conditions as (10).
The capacitor should be subjected to a simple harmonic motion
having a total amplitude of 1.5mm, the frequency being varied
uniformly between the approximate limits of 10 and 55Hz. The
frequency range, from 10 to 55Hz and return to 10Hz, should
be traversed in approximately 1 minute.
This motion should be applied for a period of 2 hours in each of
3 mutually perpendicular directions (total of 6 hours).
Appearance
Capacitance
Q
Frequency 1T0.1MHz
Voltage 0.5 to 5Vrms
Within the specified tolerance (Table A)
Within T0.2% or T0.05pF
(whichever is larger)
Temperature
Coefficient
Capacitance
Drift
Capacitance
Temperature
Characteristics
9
The capacitance change should be measured after 5 min. at
each specified temp. stage.
The temperature coefficient is determined using the capacitance
measured in step 3 as a reference.
When cycling the temperature sequentially from steps 1 through 5
the capacitance should be within the specified tolerance for the
temperature coefficient and capacitance change as in Table A.
The capacitance drift is calculated by dividing the differences
between the maximum and minimum measured values in the
steps 1, 3 and 5 by the capacitance value in step 3.
Step
1
2
3
4
5
Reference Temp. T2
Y55T3
Reference Temp. T2
125T3
Reference Temp. T2
Temperature (D)
(in mm)
Fig. 1
Type a b c
GQM18
GQM21
GQM22
1.0
1.2
2.2
3.0
4.0
5.0
1.2
1.65
2.9
GQM Series Specifications and Test Methods
108
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
!Note 1. This Specifications and Test Methods is downloaded from the website of Murata Manufacturing co.,ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice.
0. Please check with our sales representatives or product engineers before ordering.
2. This Specifications and Test Methods has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product
0. specifications before ordering.
GQM Series Specifications and Test Methods
Deflection12
Solder the capacitor on the test jig (glass epoxy board) shown
in Fig. 2 using a eutectic solder.
Then apply a force in the direction shown in Fig. 3.
The soldering should be done by the reflow method and should
be conducted with care so that the soldering is uniform and free
of defects such as heat shock.
YZ^ª«¯
VZ[§«¬
b
TUWXYZ[\]_`¥¦¨©ª«¬®°±
,
QRSUVWZ
]^
¢£¤¦§¨«
®¯
TUX¥¦©
,QTU¢¥¦
a
U¦
UY¦ª
c
VWZ[§¨«¬
Y]^ª®¯
100
Z]^«®¯
STW¤¥¨
40
φ4.5
Capacitance meter
Flexure : V1
20 50
R230
Pressurizing
speed: 1.0mm/sec.
Pressurize
45 45
Fig. 3
t: 1.6mm
Continued from the preceding page.
ItemNo. Test Method
Specifications
75% of the terminations are to be soldered evenly
and continuously.
Solderability of
Termination
13
Immerse the capacitor in a solution of ethanol (JIS-K-8101) and
rosin (JIS-K-5902) (25% rosin in weight proportion). Preheat at
80 to 120Dfor 10 to 30 seconds. After preheating, immerse in
eutectic solder solution for 2T0.5 seconds at 230T5Dor
Sn-3.0Ag-0.5Cu solder solution for 2T0.5 seconds at 245T5°C.
More than 10,000M
Within T2.5% or T0.25 pF
(whichever is larger)
30pF and over: QU1400
30pF and below: QU800W20C
C: Nominal Capacitance (pF)
Appearance
I.R.
Capacitance
Change
Q
No defects or abnormalities.
The measured and observed characteristics should satisfy the
specifications in the following table.
Resistance
to Soldering
Heat
14
Preheat the capacitor at 120 to 150Dfor 1 minute. Immerse the
capacitor in a eutectic solder or Sn-3.0Ag-0.5Cu solder solution
at 270T5Dfor 10T0.5 seconds. Let sit at room temperature for
24T2 hours, then measure.
No defects.
Dielectric
Strength
More than 10,000M
Within T2.5% or T0.25pF
(whichever is larger)
30pF and over: QU1400
30pF and below: QU800W20C
C: Nominal Capacitance (pF)
Appearance
I.R.
Capacitance
Change
Q
No defects or abnormalities.
The measured and observed characteristics should satisfy the
specifications in the following table.
Temperature
Cycle
15
Fix the capacitor to the supporting jig in the same manner and
under the same conditions as (10).
Perform the five cycles according to the four heat treatments
listed in the following table.
Let sit for 24T2 hours at room temperature, then measure.
No defects.
Dielectric
Strength
More than 1,000M
Within T5% or T0.5pF
(whichever is larger)
30pF and over: QU350
10pF and over, 30pF and below: QU275+5C/2
10pF and below: QU200W10C
C: Nominal Capacitance (pF)
Appearance
I.R.
Capacitance
Change
Q
No defects or abnormalities.
The measured and observed characteristics should satisfy the
specifications in the following table.
Humidity
Steady
State
16
Set the capacitor at 40T2Dand in 90 to 95% humidity for
500T12 hours.
Remove and set for 24T2 hours at room temperature, then
measure.
(in mm)
Fig. 2
Type a b c
GQM18
GQM21
GQM22
1.0
1.2
2.2
3.0
4.0
5.0
1.2
1.65
2.9
Step 1234
Temp. (D)
Time (min.)
Min. Operating
Temp. W0/Y3
Room
Temp.
Max. Operating
Temp. W3/Y0
Room
Temp.
30T32 to 3 30T32 to 3
Continued on the following page.
Within T5% or T0.5pF
(whichever is larger)
Capacitance
Change
No defects or abnormalities.
Appearance
GQM Series Specifications and Test Methods
109
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
!Note 1. This Specifications and Test Methods is downloaded from the website of Murata Manufacturing co.,ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice.
0. Please check with our sales representatives or product engineers before ordering.
2. This Specifications and Test Methods has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product
0. specifications before ordering.
GQM Series Specifications and Test Methods
Continued from the preceding page.
ItemNo. Test Method
Specifications
More than 1,000M
Within T3% or T0.3pF
(whichever is larger)
30pF and over: QU350
10pF and over, 30pF and below: QU275W5C/2
10pF and below: QU200W10C
C: Nominal Capacitance (pF)
Appearance
I.R.
Capacitance
Change
Q
No defects or abnormalities.
The measured and observed characteristics should satisfy the
specifications in the following table.
High
Temperature
Load
18
Apply 200%* of the rated voltage for 1000T12 hours at the
maximum operating temperature T3D.
Set for 24T2 hours at room temperature, then measure.
The charge/discharge current is less than 50mA.
*GQM22: 150% of the rated voltage
More than 500M
Within T7.5% or T0.75pF
(whichever is larger)
30pF and over: QU200
30pF and below: QU100W10C/3
C: Nominal Capacitance (pF)
Appearance
I.R.
Capacitance
Change
Q
No defects or abnormalities.
The measured and observed characteristics should satisfy the
specifications in the following table.
Humidity
Load
17
Apply the rated voltage at 40T2Dand 90 to 95% humidity for
500T12 hours. Remove and let sit for 24T2 hours at room
temperature then measure. The charge/discharge current is
less than 50mA.
*1: Nominal values denote the temperature coefficient within a range of 25 to 125D.
5C 0T30 0.250.400.58 Y0.11Y0.17Y0.24
Char. Nominal Values
(ppm/D) *1
Capacitance Change from 25D(%)
Max. Min.
Y30DY10D
Max. Min.
Table A
Y55D
Max. Min.
GQM Series Specifications and Test Methods
110
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
GQM Series Data
Q - Frequency Characteristics Resonant Frequency - Capacitance
100M
1
10
100
1000
10000
1G
Frequency (Hz)
GQM18
Q
10G
1pF6.8pF 2.4pF
0.1
0
1
10
100
1 10 100
Capacitance (pF)
Resonant Frequency (GHz)
GQM18
GQM21
GQM Series Data
111
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
112
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Chip Monolithic Ceramic Capacitors
Monolithic Microchip GMA Series
Features
1. Better microwave characteristics
2. Suitable for by passing
3. High density mounting
Applications
1. Optical device for telecommunication
2. IC, built-in IC packaging
3. Measuring equipment
Part Number LWT
Dimensions (mm)
0.5 ±0.05 0.5 ±0.05 0.35 ±0.05
0.8 ±0.05 0.8 ±0.05 0.5 ±0.1
GMA05X 0.38 ±0.05 0.38 ±0.05 0.3 ±0.05
GMA0D3
GMA085
L
Outer electrode: Au plated
W
T
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
113
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Capacitance Table
High Dielectric Constant Type X7R(R7)/X5R(R6) Characteristics
0.38x0.38
(0D)
<015015>
0.5x0.5
(05)
<0202>
10
(1A)100
(2A)25
(1E)10
(1A)6.3
(0J)
Xex.X: T Dimension [mm]
LxW
[mm]
Rated Voltage
[Vdc]
Capacitance
100pF(101)
150pF(151)
220pF(221)
330pF(331)
470pF(471)
680pF(681)
1000pF(102)
1500pF(152)
2200pF(222)
3300pF(332)
4700pF(472)
6800pF(682)
10000pF(103)
15000pF(153)
22000pF(223)
33000pF(333)
47000pF(473)
68000pF(683)
0.10µF(104)
0.47µF(474)
3
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
0.8x0.8
(08)
<0303>
100
(2A)25
(1E)10
(1A)6.3
(0J)
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
5
5
5
5
5
5
5
5
5
5
5
5
5
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
114
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
* Please refer to GMA series Specifications and Test Method (2).
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
10(1A)
GMA0D3R71A103MA01T
0.38x0.38(0D)<015015>
10000pF(103)±20%(M)
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
100(2A)
GMA05XR72A101MA01T
GMA05XR72A151MA01T
GMA05XR72A221MA01T
GMA05XR72A331MA01T
GMA05XR72A471MA01T
GMA05XR72A681MA01T
GMA05XR72A102MA01T
25(1E)
GMA05XR71E152MA11T
GMA05XR71E222MA11T
GMA05XR71E332MA11T
GMA05XR71E472MA11T
10(1A)
GMA05XR71A682MA01T
GMA05XR71A103MA01T
GMA05XR71A153MA01T
GMA05XR71A223MA01T
6.3(0J)
GMA05XR60J104ME12T*
0.5x0.5(05)<0202>
100pF(101)
150pF(151)
220pF(221)
330pF(331)
470pF(471)
680pF(681)
1000pF(102)
1500pF(152)
2200pF(222)
3300pF(332)
4700pF(472)
6800pF(682)
10000pF(103)
15000pF(153)
22000pF(223)
33000pF(333)
47000pF(473)
68000pF(683)
0.10µF(104)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
100(2A)
GMA085R72A152MA01T
GMA085R72A222MA01T
GMA085R72A332MA01T
GMA085R72A472MA01T
GMA085R72A682MA01T
25(1E)
GMA085R71E103MA11T
GMA085R71E153MA11T
GMA085R71E223MA11T
10(1A)
GMA085R71A333MA01T
GMA085R71A473MA01T
GMA085R71A683MA01T
GMA085R71A104MA01T
6.3(0J)
GMA085R60J474ME12T*
0.8x0.8(08)<0303>
1500pF(152)
2200pF(222)
3300pF(332)
4700pF(472)
6800pF(682)
10000pF(103)
15000pF(153)
22000pF(223)
33000pF(333)
47000pF(473)
68000pF(683)
0.10µF(104)
0.47µF(474)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
±20%(M)
High Dielectric Constant Type X7R(R7)/X5R(R6) Characteristics
Packaging Code in Part Number shows STD Tray.
qProduct ID wSeries eDimensions (LxW) rDimension (T)
tTemperature Characteristics yRated Voltage uCapacitance
iCapacitance Tolerance oIndividual Specification Code !0Packaging
(Part Number)
wq e r t y u i o !0
GM A 0D 3 R7 1A 103 M A01 T
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Continued on the following page.
The capacitor should be set for 24±2 hours at room
temperature after one hour of heat treatment at 150+0/–10°C,
then measure for the initial measurement. Fix the capacitor to
the supporting jig in the same manner and under the same
conditions as (11) and conduct the five cycles according to the
temperatures and time shown in the following table. Set it for
24±2 hours at room temperature, then measure.
12
Temperature
Cycle
Appearance
No defects or abnormalities
Capacitance
Change
R7: Within ±7.5%
D.F. R7: W.V.: 25V min.; 0.025 max.
W.V.: 16V/10V; 0.035 max.
I.R. More than 10,000M or 500F
(whichever is smaller)
Dielectric
Strength
No defects
Ramp frequency from 10 to 55Hz then return to 10Hz all within
1 minute. Amplitude: 1.5 mm (0.06 inch) max. total excursion.
Apply this motion for a period of 2 hours in each of 3 mutually
perpendicular directions (total 6 hours).
11
Vibration
Resistance
Appearance
No defects or abnormalities
Capacitance
Within the specified tolerance
D.F. R7: W.V.: 25V min.; 0.025 max.
W.V.: 16V/10V; 0.035 max.
MIL-STD-883 Method 2011 Condition D
Mount the capacitor on a gold metallized alumina substrate with
Au-Sn (80/20) and bond a 25µm (0.001 inch) gold wire to the
capacitor terminal using an ultrasonic ball bond. Then, pull wire.
10
Mechanical
Strength
Bond
Strength Pull force: 0.03N min.
The capacitance change should be measured after 5 min. at
each specified temp. stage.
•The ranges of capacitance change compared with the
Reference Temperature value over the temperature ranges
shown in the table should be within the specified ranges.*
*Initial measurement for high dielectric constant type
Perform a heat treatment at 150 +0/–10°C for one hour and
then let sit for 24±2 hours at room temperature.
Perform the initial measurement.
9
Capacitance
Temperature
Characteristics
No bias R7: Within +/–15% (–55 to +125°C)
Die Shear
Strength
Die Shear force: 2N min. MIL-STD-883 Method 2019
Mount the capacitor on a gold metallized alumina substrate
with Au-Sn (80/20). Apply the force parallel to the substrate.
Mounting for testing: The capacitors should be mounted on the substrate as shown below using die bonding and wire bonding when tests No. 11 to 15 are performed.
GMA Series Specifications and Test Methods (1)
Step
Temp. (°C)
Time (min.)
1
Min. Operating
Temp. +0/–3
30±3
2
Room
Temp.
2 to 3
3
Max. Operating
Temp. +3/–0
30±3
4
Room
Temp.
2 to 3
Step Temperature (°C)
25±2
–55±3
25±2
125±3
1
2
3
4
1±0.1kHz
1±0.2Vrms
Frequency
Voltage
8Dissipation Factor
(D.F.) R7: W.V.: 25V min.; 0.025 max.
W.V.: 16V/10V; 0.035 max.
The capacitance/D.F. should be measured at reference
temperature at the frequency and voltage shown in the table.
7 Capacitance Within the specified tolerance
The insulation resistance should be measured with a DC
voltage not exceeding the rated voltage at normal temperature
and humidity and within 2 minutes of charging.
6
Insulation Resistance
More than 10,000M or 500F
(whichever is smaller)
No failure should be observed when a voltage of 250% of the
rated voltage is applied between the both terminations for 1 to 5
seconds, provided the charge/discharge current is less than
50mA.
5 Dielectric Strength No defects or abnormalities
Using calipers4 Dimensions Within the specified dimensions
Visual inspection3 Appearance No defects or abnormalities
The rated voltage is defined as the maximum voltage that may
be applied continuously to the capacitor.
When AC voltage is superimposed on DC voltage, VP-P or VO-P,
whichever is larger, should be maintained within the rated voltage
range.
2 Rated Voltage See the previous pages.
Reference Temperature: 25°C1Operating
Temperature
Range R7: –55 to +125°C
No. Test MethodSpecificationsItem
!Note 1. This Specifications and Test Methods is downloaded from the website of Murata Manufacturing co.,ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice.
0. Please check with our sales representatives or product engineers before ordering.
2. This Specifications and Test Methods has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product
0. specifications before ordering.
GMA Series Specifications and Test Methods (1)
115
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
When no "*" is added in PNs table, please refer to GMA Series Specifications and Test Methods (1).
When "*" is added in PNs table, please refer to GMA Series Specifications and Test Methods (2).
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Continued from the preceding page.
A voltage treatment should be given to the capacitor, in which a
DC voltage of 200% the rated voltage is applied for one hour at
the maximum operating temperature; ±3°C then it should be set
for 24±2 hours at room temperature and the initial measurement
should be conducted.
Then apply the above mentioned voltage continuously for
1000±12 hours at the same temperature, remove it from the
bath, and set it for 24±2 hours at room temperature, then
measure. The charge/discharge current is less than 50mA.
15
High
Temperature
Load
Appearance
No defects or abnormalities
Capacitance
Change
R7: Within ±12.5%
D.F. R7: W.V.: 10V min.; 0.05 max.
I.R. More than 1,000M or 50F
(whichever is smaller)
Apply the rated voltage for 500±12 hours at 40±2°C, in 90 to
95% humidity and set it for 24±2 hours at room temperature,
then measure. The charge/discharge current is less than 50mA.
14 Humidity
Load
Appearance
No defects or abnormalities
Capacitance
Change
R7: Within ±12.5%
D.F. R7: W.V.: 10V min.; 0.05 max.
I.R. More than 500M or 25F
(whichever is smaller)
Set the capacitor for 500±12 hours at 40±2°C, in 90 to 95%
humidity.
Take it out and set it for 24±2 hours at room temperature, then
measure.
13
Humidity
(Steady State)
Appearance
No defects or abnormalities
Capacitance
Change
R7: Within ±12.5%
D.F. R7: W.V.: 10V min.; 0.05 max.
I.R. More than 1,000M or 50F
(whichever is smaller)
Mounting for testing: The capacitors should be mounted on the substrate as shown below using die bonding and wire bonding when tests No. 11 to 15 are performed.
GMA Series Specifications and Test Methods (1)
Alumina substrate Gold land
Alumina substrate
Capacitor
Die bond
Gold wire
Gold land
No. Test MethodSpecificationsItem
!Note 1. This Specifications and Test Methods is downloaded from the website of Murata Manufacturing co.,ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice.
0. Please check with our sales representatives or product engineers before ordering.
2. This Specifications and Test Methods has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product
0. specifications before ordering.
GMA Series Specifications and Test Methods (1)
116
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
When no "*" is added in PNs table, please refer to GMA Series Specifications and Test Methods (1).
When "*" is added in PNs table, please refer to GMA Series Specifications and Test Methods (2).
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Continued on the following page.
The capacitor should be set for 24±2 hours at room
temperature after one hour of heat treatment at 150+0/–10°C,
then measure for the initial measurement. Fix the capacitor to
the supporting jig in the same manner and under the same
conditions as (11) and conduct the five cycles according to the
temperatures and time shown in the following table. Set it for
48±4 hours at room temperature, then measure.
12
Temperature
Sudden
Change
Appearance
No defects or abnormalities.
Capacitance
Change
R6 : Within ±7.5%
D.F. R6 : 0.1 max.
I.R. More than 50 · F
Dielectric
Strength
No defects
Ramp frequency from 10 to 55Hz then return to 10Hz all within
1 minute. Amplitude: 1.5 mm (0.06 inch) max. total excursion.
Apply this motion for a period of 2 hours in each of 3 mutually
perpendicular directions (total 6 hours).
11
Vibration
Resistance
Appearance
No defects or abnormalities.
Capacitance
Within the specified tolerance.
D.F. R6 : 0.1 max.
MIL-STD-883 Method 2011 Condition D
Mount the capacitor on a gold metallized alumina substrate with
Au-Sn (80/20) and bond a 25µm (0.001 inch) gold wire to the
capacitor terminal using an ultrasonic ball bond. Then, pull wire.
10
Mechanical
Strength
Bond
Strength Pull force : 0.03N min.
The capacitance change should be measured after 5 min. at
each specified temp. stage.
The ranges of capacitance change compared with the
Reference Temperature value over the temperature ranges
shown in the table should be within the specified ranges.*
*Initial measurement for high dielectric constant type
Perform a heat treatment at 150 +0/–10°C for one hour and
then let sit for 24±2 hours at room temperature.
Perform the initial measurement.
9
Capacitance
Temperature
Characteristics
No bias R6 : Within ±15% (–55°C to +85°C)
Die Shear
Strength
Die Shear force : 2N min. MIL-STD-883 Method 2019
Mount the capacitor on a gold metallized alumina substrate
with Au-Sn (80/20). Apply the force parallel to the substrate.
8Dissipation
Factor (D.F.) R6 : 0.1 max.
The capacitance/D.F. should be measured at reference
temperature at the frequency and voltage shown in the table.
7 Capacitance Within the specified tolerance.
The insulation resistance should be measured with a DC
voltage not exceeding the rated voltage at normal temperature
and humidity and within 1 minutes of charging.
6Insulation
Resistance More than 50 · F
No failure should be observed when 250% of the rated voltage
is applied between the terminations for 1 to 5 seconds, provid-
ed the charge/discharge current is less than 50mA.
5 Dielectric Strength No defects or abnormalities.
Using calipers.4 Dimensions Within the specified dimensions.
Visual inspection.3 Appearance No defects or abnormalities.
The rated voltage is defined as the maximum voltage that may
be applied continuously to the capacitor.
When AC voltage is superimposed on DC voltage, VP-P or VO-P,
whichever is larger, should be maintained within the rated volt-
age range.
2 Rated Voltage See the previous pages.
Reference Temperature : 25°C1Operating
Temperature
Range R6 : –55°C to 85°C
Mounting for testing: The capacitors should be mounted on the substrate as shown below using die bonding and wire bonding when tests No. 11 to 14 are performed.
GMA Series Specifications and Test Methods (2)
No. Test MethodSpecificationsItem
Step
Temp. (°C)
Time (min.)
1
Min.
Operating
Temp.+0/–3
30±3
2
Room
Temp.
2 to 3
3
Max.
Operating
Temp. +3/–0
30±3
4
Room
Temp.
2 to 3
Step Temperature (°C)
25±2
–55±3
25±2
85±3
1
2
3
4
Capacitance Frequency
1±0.1kHz Voltage
0.5±0.1VrmsCV10µF (6.3Vmax.)
!Note 1. This Specifications and Test Methods is downloaded from the website of Murata Manufacturing co.,ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice.
0. Please check with our sales representatives or product engineers before ordering.
2. This Specifications and Test Methods has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product
0. specifications before ordering.
GMA Series Specifications and Test Methods (2)
117
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
When no "*" is added in PNs table, please refer to GMA Series Specifications and Test Methods (1).
When "*" is added in PNs table, please refer to GMA Series Specifications and Test Methods (2).
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Continued from the preceding page.
Apply 150% of the rated voltage for 1000±12 hours at the
maximum operating temperature ±3°C. Let sit for 24±2 hours at
room temperature, then measure.
The charge/ discharge current is less than 50mA.
• Initial measurement
Perform a heat treatment at 150+0/–10°C for one hour and then
let sit for 24±2 hours at room temperature. Perform the initial
measurement.
• Measurement after test
Perform a heat treatment at 150+0/–10°C for one hour and then
let sit for 24±2 hours at room temperature, then measure.
14
Durability
Appearance
No defects or abnormalities.
Capacitance
Change
R6 : Within ±12.5%
D.F. R6 : 0.2 max.
I.R. More than 25 · F
Apply the rated voltage for 500±12 hours at 40±2°C, in 90 to
95% humidity and set it for 24±2 hours at room temperature,
then measure. The charge/discharge current is less than
50mA.
• Initial measurement
Perform a heat treatment at 150+0/–10°C for one hour and then
let sit for 24±2 hours at room temperature. Perform the initial
measurement.
• Measurement after test
Perform a heat treatment at 150+0/–10°C for one hour and then
let sit for 24±2 hours at room temperature, then measure.
13
High
Temperature
High
Humidity
(Steady)
Appearance
No defects or abnormalities.
Capacitance
Change
R6 : Within ±12.5%
D.F. R6 : 0.2 max.
I.R. More than 12.5 · F
Mounting for testing: The capacitors should be mounted on the substrate as shown below using die bonding and wire bonding when tests No. 11 to 14 are performed.
GMA Series Specifications and Test Methods (2)
No. Test MethodSpecificationsItem
Alumina substrate Gold land
Alumina substrate
Capacitor
Die bond
Gold wire
Gold land
!Note 1. This Specifications and Test Methods is downloaded from the website of Murata Manufacturing co.,ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice.
0. Please check with our sales representatives or product engineers before ordering.
2. This Specifications and Test Methods has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product
0. specifications before ordering.
GMA Series Specifications and Test Methods (2)
118
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
When no "*" is added in PNs table, please refer to GMA Series Specifications and Test Methods (1).
When "*" is added in PNs table, please refer to GMA Series Specifications and Test Methods (2).
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
119
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Chip Monolithic Ceramic Capacitors
for Bonding GMD Series
Features
1. Small chip size (LxWxT: 0.6x0.3x0.3, 1.0x0.5x0.5mm)
2. Available for Wire/Die bonding due to
Gold termination.
3. Suitable for Optical device for telecommunication,
built-in IC packaging.
Applications
1. Optical device for telecommunication
2. IC, built-in IC packaging
Part Number
0.6±0.03
1.0±0.05 0.3±0.03
0.5±0.05 0.3±0.03
0.5±0.05 0.12 to 0.22
0.15 to 0.35 0.16
0.3
GMD033
GMD155
L W T e g min.
Outer electrode: Au
L
T
W
e eg
Dimensions (mm)
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Capacitance Table
120
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
High Dielectric Constant Type X7R(R7)/X5R(R6) Characteristics
25
(1E)
0.6x0.3
(03)
<0201>
16
(1C)10
(1A)50
(1H)
1.0x0.5
(15)
<0402>
25
(1E)16
(1C)
3ex.3: T Dimension [mm]
LxW
[mm]
Rated Voltage
[Vdc]
Capacitance
100pF(101)
120pF(121)
150pF(151)
180pF(181)
220pF(221)
270pF(271)
330pF(331)
390pF(391)
470pF(471)
560pF(561)
680pF(681)
820pF(821)
1000pF(102)
1200pF(122)
1500pF(152)
1800pF(182)
2200pF(222)
2700pF(272)
3300pF(332)
3900pF(392)
4700pF(472)
5600pF(562)
6800pF(682)
8200pF(822)
10000pF(103)
12000pF(123)
15000pF(153)
18000pF(183)
22000pF(223)
27000pF(273)
33000pF(333)
39000pF(393)
47000pF(473)
56000pF(563)
68000pF(683)
82000pF(823)
0.10µF(104)
0.12µF(124)
0.15µF(154)
0.18µF(184)
0.22µF(224)
0.27µF(274)
0.33µF(334)
0.39µF(394)
0.47µF(474)
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
6.3
(0J)
0.6x0.3
(03)
<0201> 10
(1A)
3
3
3
3
5
5
5
5
5
5
5
5
1.0x0.5
(15)
<0402>
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
121
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
25(1E)
GMD033R71E101KA01D
GMD033R71E121KA01D
GMD033R71E151KA01D
GMD033R71E181KA01D
GMD033R71E221KA01D
GMD033R71E271KA01D
GMD033R71E331KA01D
GMD033R71E391KA01D
GMD033R71E471KA01D
GMD033R71E561KA01D
GMD033R71E681KA01D
GMD033R71E821KA01D
GMD033R71E102KA01D
GMD033R71E122KA01D
GMD033R71E152KA01D
16(1C)
GMD033R71C182KA11D
GMD033R71C222KA11D
GMD033R71C272KA11D
GMD033R71C332KA11D
10(1A)
GMD033R71A392KA01D
GMD033R71A472KA01D
GMD033R71A562KA01D
GMD033R71A682KA01D
GMD033R71A822KA01D
GMD033R71A103KA01D
0.6x0.3(03)<0201>
100pF(101)
120pF(121)
150pF(151)
180pF(181)
220pF(221)
270pF(271)
330pF(331)
390pF(391)
470pF(471)
560pF(561)
680pF(681)
820pF(821)
1000pF(102)
1200pF(122)
1500pF(152)
1800pF(182)
2200pF(222)
2700pF(272)
3300pF(332)
3900pF(392)
4700pF(472)
5600pF(562)
6800pF(682)
8200pF(822)
10000pF(103)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
High Dielectric Constant Type X7R(R7) Characteristics
Packaging Code in Part Number shows STD 180mm Reel Taping.
qProduct ID wSeries eDimensions (LxW) rDimension (T)
tTemperature Characteristics yRated Voltage uCapacitance
iCapacitance Tolerance oIndividual Specification Code !0Packaging
(Part Number)
wq e r t y u i o !0
GM D 03 3 R7 1E 101 K A01 D
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
122
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
50(1H)
GMD155R71H221KA01D
GMD155R71H271KA01D
GMD155R71H331KA01D
GMD155R71H391KA01D
GMD155R71H471KA01D
GMD155R71H561KA01D
GMD155R71H681KA01D
GMD155R71H821KA01D
GMD155R71H102KA01D
GMD155R71H122KA01D
GMD155R71H152KA01D
GMD155R71H182KA01D
GMD155R71H222KA01D
GMD155R71H272KA01D
GMD155R71H332KA01D
GMD155R71H392KA01D
GMD155R71H472KA01D
25(1E)
GMD155R71E562KA01D
GMD155R71E682KA01D
GMD155R71E822KA01D
GMD155R71E103KA01D
GMD155R71E123KA01D
GMD155R71E153KA01D
GMD155R71E183KA01D
GMD155R71E223KA01D
GMD155R71E273KA11D
GMD155R71E333KA11D
GMD155R71E393KA11D
GMD155R71E473KA11D
16(1C)
GMD155R71C563KA11D
GMD155R71C683KA11D
GMD155R71C823KA11D
GMD155R71C104KA11D
1.0x0.5(15)<0402>
220pF(221)
270pF(271)
330pF(331)
390pF(391)
470pF(471)
560pF(561)
680pF(681)
820pF(821)
1000pF(102)
1200pF(122)
1500pF(152)
1800pF(182)
2200pF(222)
2700pF(272)
3300pF(332)
3900pF(392)
4700pF(472)
5600pF(562)
6800pF(682)
8200pF(822)
10000pF(103)
12000pF(123)
15000pF(153)
18000pF(183)
22000pF(223)
27000pF(273)
33000pF(333)
39000pF(393)
47000pF(473)
56000pF(563)
68000pF(683)
82000pF(823)
0.10µF(104)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
High Dielectric Constant Type X7R(R7) Characteristics
Packaging Code in Part Number shows STD 180mm Reel Taping.
qProduct ID wSeries eDimensions (LxW) rDimension (T)
tTemperature Characteristics yRated Voltage uCapacitance
iCapacitance Tolerance oIndividual Specification Code !0Packaging
(Part Number)
wq e r t y u i o !0
GM D 15 5 R7 1H 221 K A01 D
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
123
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code
* Please refer to GMD series Specifications and Test Method (2).
LxW [mm]
Rated Volt. [Vdc]
Capacitance Tolerance Part Number
6.3(0J)
GMD033R60J563KE11D*
GMD033R60J683KE11D*
GMD033R60J823KE11D*
GMD033R60J104KE11D*
10(1A)
GMD155R61A124KE12D*
GMD155R61A154KE12D*
GMD155R61A184KE12D*
GMD155R61A224KE12D*
GMD155R61A274KE11D*
GMD155R61A334KE11D*
GMD155R61A394KE11D*
GMD155R61A474KE11D*
0.6x0.3(03)<0201> 1.0x0.5(15)<0402>
56000pF(563)
68000pF(683)
82000pF(823)
0.10µF(104)
0.12µF(124)
0.15µF(154)
0.18µF(184)
0.22µF(224)
0.27µF(274)
0.33µF(334)
0.39µF(394)
0.47µF(474)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
±10%(K)
High Dielectric Constant Type X5R(R6) Characteristics
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Continued on the following page.
The capacitor should be set for 24±2 hours at room
temperature after one hour of heat treatment at 150+0/–10°C,
then measure for the initial measurement. Fix the capacitor to
the supporting jig in the same manner and under the same
conditions as (11) and conduct the five cycles according to the
temperatures and time shown in the following table. Set it for
24±2 hours at room temperature, then measure.12
Temperature
Cycle
Appearance
No defects or abnormalities.
Capacitance
Change
R7 : Within ±7.5%
D.F. R7 :
W.V. 25Vmin. : 0.025 max.
W.V. 16/10V : 0.035 max.
I.R. More than 10,000M or 500 · F
(whichever is smaller)
Dielectric
Strength
No defects
Ramp frequency from 10 to 55Hz then return to 10Hz all within
1 minute. Amplitude: 1.5 mm (0.06 inch) max. total excursion.
Apply this motion for a period of 2 hours in each of 3 mutually
perpendicular directions (total 6 hours).
11
Vibration
Resistance
Appearance
No defects or abnormalities.
Capacitance
Within the specified tolerance.
D.F. R7 :
W.V. 25Vmin. : 0.025 max.
W.V. 16/10V : 0.035 max.
MIL-STD-883 Method 2011 Condition D
Mount the capacitor on a gold metallized alumina substrate with
Au-Sn (80/20) and bond a 25mm (0.001 inch) gold wire to the
capacitor terminal using an ultrasonic ball bond. Then, pull wire.
10
Mechanical
Strength
Bond
Strength Pull force : 0.03N min.
Die Shear
Strength
Die Shear force : 2N min. MIL-STD-883 Method 2019
Mount the capacitor on a gold metallized alumina substrate
with Au-Sn (80/20). Apply the force parallel to the substrate.
The capacitance change should be measured after 5 min. at
each specified temp. stage.
The ranges of capacitance change compared with the
Reference Temperature value over the temperature ranges
shown in the table should be within the specified ranges.*
*Initial measurement for high dielectric constant type
Perform a heat treatment at 150 +0/–10°C for one hour and
then let sit for 24±2 hours at room temperature.
Perform the initial measurement.
9
Capacitance
Temperature
Characteristics
No bias R7 : Within ±15% (–55°C to +125°C)
8Dissipation
Factor (D.F.)
R7 :
W.V. 25Vmin. : 0.025 max.
W.V. 16/10V : 0.035 max.
The capacitance/D.F. should be measured at reference
temperature at the frequency and voltage shown in the table.
7 Capacitance Within the specified tolerance.
The insulation resistance should be measured with a DC
voltage not exceeding the rated voltage at normal temperature
and humidity and within 2 minutes of charging.
6Insulation
Resistance More than 10,000M or 500 · F
(whichever is smaller)
No failure should be observed when 250% of the rated voltage
is applied between the terminations for 1 to 5 seconds, provid-
ed the charge/discharge current is less than 50mA.
5 Dielectric Strength No defects or abnormality.
Using calipers.4 Dimensions Within the specified dimensions.
Visual inspection.3 Appearance No defects or abnormalities.
The rated voltage is defined as the maximum voltage that may
be applied continuously to the capacitor.
When AC voltage is superimposed on DC voltage, VP-P or VO-P,
whichever is larger, should be maintained within the rated volt-
age range.
2 Rated Voltage See the previous pages.
Reference Temperature : 25°C1Operating
Temperature
Range R7 : –55°C to 125°C
Mounting for testing: The capacitors should be mounted on the substrate as shown below using die bonding. when tests No. 11 to 15 are performed.
GMD Series Specifications and Test Methods (1)
No. Test MethodSpecificationsItem
Step
Temp. (°C)
Time (min.)
1
Min.
Operating
Temp.+0/–3
30+/–3
2
Room
Temp.
2 to 3
3
Max.
Operating
Temp. +3/–0
30+/–3
4
Room
Temp.
2 to 3
Step Temperature (°C)
25±2
–55±3
25±2
125±3
1
2
3
4
1±0.1kHz
1±0.2Vrms
Frequency
Voltage
!Note 1. This Specifications and Test Methods is downloaded from the website of Murata Manufacturing co.,ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice.
0. Please check with our sales representatives or product engineers before ordering.
2. This Specifications and Test Methods has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product
0. specifications before ordering.
GMD Series Specifications and Test Methods (1)
124
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
When no "*" is added in PNs table, please refer to GMD Series Specifications and Test Methods (1).
When "*" is added in PNs table, please refer to GMD Series Specifications and Test Methods (2).
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Continued from the preceding page.
A voltage treatment should be given to the capacitor, in which a
DC voltage of 200% the rated voltage is applied for one hour at
the maximum operating temperature; ±3°C then it should be set
for 24±2 hours at room temperature and the initial measurement
should be conducted.
Then apply the above-mentioned voltage continuously for
1000±12 hours at the same temperature, remove it from the
bath, and set it for 24±2 hours at room temperature, then
measure. The charge/discharge current is less than 50mA.
15
High
Temperature
Load
Appearance
No defects or abnormalities.
Capacitance
Change
R7 : Within ±12.5%
D.F. R7 :
W.V. 25Vmin. : 0.05 max.
W.V. 16/10V : 0.05 max.
I.R. More than 1,000M or 50 · F
(whichever is smaller)
Apply the rated voltage for 500±12 hours at 40±2°C, in 90 to
95% humidity and set it for 24±2 hours at room temperature,
then measure. The charge/discharge current is less than
50mA.
14 Humidity
Load
Appearance
No defects or abnormalities.
Capacitance
Change
R7 : Within ±12.5%
D.F. R7 :
W.V. 25Vmin. : 0.05 max.
W.V. 16/10V : 0.05 max.
I.R. More than 500M or 25 · F
(whichever is smaller)
Set the capacitor for 500±12 hours at 40±2°C, in 90 to 95%
humidity.
Take it out and set it for 24±2 hours at room temperature, then
measure.
13
Humidity
(Steady State)
Appearance
No defects or abnormalities.
Capacitance
Change
R7 : Within ±12.5%
D.F. R7 :
W.V. 25Vmin. : 0.05 max.
W.V. 16/10V : 0.05 max.
I.R. More than 1,000M or 50 · F
(whichever is smaller)
Mounting for testing: The capacitors should be mounted on the substrate as shown below using die bonding. when tests No. 11 to 15 are performed.
GMD Series Specifications and Test Methods (1)
No. Test MethodSpecificationsItem
Alumina substrate Gold land
Alumina substrate
Capacitor
Die bond Gold wireGold wire
Gold land
!Note 1. This Specifications and Test Methods is downloaded from the website of Murata Manufacturing co.,ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice.
0. Please check with our sales representatives or product engineers before ordering.
2. This Specifications and Test Methods has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product
0. specifications before ordering.
GMD Series Specifications and Test Methods (1)
125
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
When no "*" is added in PNs table, please refer to GMD Series Specifications and Test Methods (1).
When "*" is added in PNs table, please refer to GMD Series Specifications and Test Methods (2).
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Continued on the following page.
The capacitor should be set for 24±2 hours at room
temperature after one hour of heat treatment at 150+0/–10°C,
then measure for the initial measurement. Fix the capacitor to
the supporting jig in the same manner and under the same
conditions as (11) and conduct the five cycles according to the
temperatures and time shown in the following table. Set it for
24±2 hours at room temperature, then measure.12
Temperature
Sudden
Change
Appearance
No defects or abnormalities.
Capacitance
Change
R6 : Within ±7.5%
D.F. R6 : 0.1 max.
I.R. More than 50 · F
Dielectric
Strength
No defects
Ramp frequency from 10 to 55Hz then return to 10Hz all within
1 minute. Amplitude: 1.5 mm (0.06 inch) max. total excursion.
Apply this motion for a period of 2 hours in each of 3 mutually
perpendicular directions (total 6 hours).
11
Vibration
Resistance
Appearance
No defects or abnormalities.
Capacitance
Within the specified tolerance.
D.F. R6 : 0.1 max.
MIL-STD-883 Method 2011 Condition D
Mount the capacitor on a gold metallized alumina substrate with
Au-Sn (80/20) and bond a 25µm (0.001 inch) gold wire to the
capacitor terminal using an ultrasonic ball bond. Then, pull wire.
10
Mechanical
Strength
Bond
Strength Pull force : 0.03N min.
The capacitance change should be measured after 5 min. at
each specified temp. stage.
The ranges of capacitance change compared with the
Reference Temperature value over the temperature ranges
shown in the table should be within the specified ranges.*
*Initial measurement for high dielectric constant type
Perform a heat treatment at 150 +0/–10°C for one hour and
then let sit for 24±2 hours at room temperature.
Perform the initial measurement.
9
Capacitance
Temperature
Characteristics
No bias R6 : Within ±15% (–55°C to +85°C)
Die Shear
Strength
Die Shear force : 2N min. MIL-STD-883 Method 2019
Mount the capacitor on a gold metallized alumina substrate
with Au-Sn (80/20). Apply the force parallel to the substrate.
8Dissipation
Factor (D.F.) R6 : 0.1 max.
The capacitance/D.F. should be measured at reference
temperature at the frequency and voltage shown in the table.
*1 GMD155 R6 1A 124 to 224 are applied to 0.5±0.1 Vrms.
7 Capacitance Within the specified tolerance.
The insulation resistance should be measured with a DC
voltage not exceeding the rated voltage at normal temperature
and humidity and within 1 minutes of charging.
6Insulation
Resistance More than 50 · F
No failure should be observed when 250% of the rated voltage
is applied between the terminations for 1 to 5 seconds, provid-
ed the charge/discharge current is less than 50mA.
5 Dielectric Strength No defects or abnormalities.
Using calipers.4 Dimensions Within the specified dimensions.
Visual inspection.3 Appearance No defects or abnormalities.
The rated voltage is defined as the maximum voltage that may
be applied continuously to the capacitor.
When AC voltage is superimposed on DC voltage, VP-P or VO-P,
whichever is larger, should be maintained within the rated volt-
age range.
2 Rated Voltage See the previous pages.
Reference Temperature : 25°C1Operating
Temperature
Range R6 : –55°C to 85°C
Mounting for testing: The capacitors should be mounted on the substrate as shown below using die bonding. when tests No. 11 to 14 are performed.
GMD Series Specifications and Test Methods (2)
No. Test MethodSpecificationsItem
Step
Temp. (°C)
Time (min.)
1
Min.
Operating
Temp.+0/–3
30±3
2
Room
Temp.
2 to 3
3
Max.
Operating
Temp. +3/–0
30±3
4
Room
Temp.
2 to 3
Step Temperature (°C)
25±2
–55±3
25±2
85±3
1
2
3
4
Capacitance Frequency
1±0.1kHz
1±0.1kHz
Voltage
1.0±0.2Vrms
0.5±0.1Vrms
CV10µF (10Vmin.)*1
CV10µF (6.3Vmax.)
!Note 1. This Specifications and Test Methods is downloaded from the website of Murata Manufacturing co.,ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice.
0. Please check with our sales representatives or product engineers before ordering.
2. This Specifications and Test Methods has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product
0. specifications before ordering.
GMD Series Specifications and Test Methods (2)
126
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
When no "*" is added in PNs table, please refer to GMD Series Specifications and Test Methods (1).
When "*" is added in PNs table, please refer to GMD Series Specifications and Test Methods (2).
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Continued from the preceding page.
Apply 150%*2 of the rated voltage for 1000±12 hours at the
maximum operating temperature ±3°C. Let sit for 24±2 hours at
room temperature, then measure.
The charge/ discharge current is less than 50mA.
*2 GMD155 R6 1A 274 to 474 are applied to 120%.
• Initial measurement
Perform a heat treatment at 150+0/–10°C for one hour and then
let sit for 24±2 hours at room temperature. Perform the initial
measurement.
• Measurement after test
Perform a heat treatment at 150+0/–10°C for one hour and then
let sit for 24±2 hours at room temperature, then measure.
14
Durability
Appearance
No defects or abnormalities.
Capacitance
Change
R6 : Within ±12.5%
D.F. R6 : 0.2 max.
I.R. More than 25 · F
Apply the rated voltage for 500±12 hours at 40±2°C, in 90 to
95% humidity and set it for 24±2 hours at room temperature,
then measure. The charge/discharge current is less than
50mA.
• Initial measurement
Perform a heat treatment at 150+0/–10°C for one hour and then
let sit for 24±2 hours at room temperature. Perform the initial
measurement.
• Measurement after test
Perform a heat treatment at 150+0/–10°C for one hour and then
let sit for 24±2 hours at room temperature, then measure.
13
High
Temperature
High
Humidity
(Steady)
Appearance
No defects or abnormalities.
Capacitance
Change
R6 : Within ±12.5%
D.F. R6 : 0.2 max.
I.R. More than 12.5 · F
Mounting for testing: The capacitors should be mounted on the substrate as shown below using die bonding. when tests No. 11 to 14 are performed.
GMD Series Specifications and Test Methods (2)
No. Test MethodSpecificationsItem
Alumina substrate Gold land
Alumina substrate
Capacitor
Die bond Gold wireGold wire
Gold land
!Note 1. This Specifications and Test Methods is downloaded from the website of Murata Manufacturing co.,ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice.
0. Please check with our sales representatives or product engineers before ordering.
2. This Specifications and Test Methods has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product
0. specifications before ordering.
GMD Series Specifications and Test Methods (2)
127
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
When no "*" is added in PNs table, please refer to GMD Series Specifications and Test Methods (1).
When "*" is added in PNs table, please refer to GMD Series Specifications and Test Methods (2).
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Part Number Dimensions (mm)
WT
Bulk BagBulk Case
ø180mm Reel
Paper Tape
Embossed Tape
Paper Tape
Embossed Tape
D
Bulk : B
Tray : T
CL
Packaging Code JK
ø330mm Reel
L
Quantity (pcs.)
Minimum Quantity Guide
1) 4mm width, 1mm pitch Embossed Taping.
2) There are parts without bulk case package.
3) Tray
4) LLL15: ø180mm Reel Paper Taping Packaging Code: E, ø330mm Reel Paper Taping Packaging Code: F
Continued on the following page.
High Power Type
High Frequency
Microchip
Array
Low ESL
GRM02
GRM03
GRM15
GRM18
GRM21
GRM31
GRM32
GRM43
GRM55
GJM03
GJM15
GQM18
GQM21
GQM22
GMA0D
GMA05
GMA08
GMD03
GMD15
GNM0M
GNM1M
GNM21
GNM31
LLL15
LLL18/LLR18
LLL21
LLL31
LLA18
LLA21
LLA31
LLM21
LLM31
0.4
0.6
1.0
1.6
2.0
3.2
3.2
4.5
5.7
0.6
1.0
1.6
2.0
2.8
0.38
0.5
0.8
0.6
1.0
0.9
1.37
2.0
3.2
0.5
0.8
1.25
1.6
1.6
2.0
3.2
2.0
3.2
0.2
0.3
0.5
0.8
1.25
1.6
2.5
3.2
5.0
0.3
0.5
0.8
1.25
2.8
0.38
0.5
0.8
0.3
0.5
0.6
1.0
1.25
1.6
1.0
1.6
2.0
3.2
0.8
1.25
1.6
1.25
1.6
0.2
0.3
0.25/0.3
0.5
0.5
0.8
0.6
0.85
1.0/1.25
0.6/0.85
1.15
1.6
0.85
1.15
1.35
1.6
1.15
2.5
2.8
1.15
2.5
3.2
0.3
0.5
0.7/0.8
0.85
1.15
0.3
0.35
0.5
0.3
0.5
0.45
0.5/0.6/0.8
0.5/0.6/0.85
0.8/0.85
1.0/1.15
0.3
0.5
0.5/0.6
0.85
0.5/0.7
1.15
0.5
0.5
0.85
0.5
0.85
1.15
0.5
0.5
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
500
1,000
1,000
500
500
1,000
1,000
1,000
1,000
1,000
400 3)
400 3)
400 3)
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
-
-
-
50,000 2)
-
15,000 2)
10,000
-
5,000 2)
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
50,000
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
50,000
50,000
50,000
10,000
10,000
10,000
10,000
-
10,000
-
-
10,000
-
-
-
-
-
-
-
-
-
-
-
-
50,000
50,000
10,000
10,000
-
-
-
-
50,000
50,000
50,000
10,000
10,000
10,000
-
50,000 4)
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
10,000
-
10,000
6,000
-
10,000
8,000
6,000
4,000
5,000
4,000
2,000
1,500
5,000
4,000
2,000
1,500
-
-
-
-
4,000
-
-
-
-
-
-
-
-
-
10,000
-
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
-
15,000
10,000
10,000
4,000
4,000
4,000
4,000
-
4,000
-
-
4,000
-
-
-
-
-
-
-
-
-
-
-
-
15,000
10,000
4,000
4,000
-
-
-
-
15,000
10,000
10,000
4,000
4,000
4,000
-
10,000 4)
-
-
-
-
-
-
-
-
-
-
-
-
-
40,000 1)
-
-
-
-
-
-
-
3,000
-
3,000
2,000
-
3,000
2,000
2,000
1,000
1,000
1,000
500
500
1,000
1,000
500
300
-
-
-
-
1,000
-
-
-
-
-
-
-
-
-
3,000
-
4,000
4,000
3,000
4,000
3,000
4,000
4,000
3,000
4,000
3,000
3,000
4,000
4,000
1.35/1.6
1.8/2.0
1.8/2.0
2.5
1.35/1.6
1.8/2.0
For General
Purpose
Package
128
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
Package
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Tape Carrier Packaging
(1) Dimensions of Reel
2.0±0.5
ø180mm Reel
5±1.5 for 4mm wide tape
10±1.5 for 8mm wide tape
14±1.5 for 12mm wide tape
ø50 min.
ø13.0±0.5
ø21.0±0.8
(2) Dimensions of Paper Tape
4.0±0.1
8mm width, 4mm pitch Tape 8mm width, 2mm pitch Tape
ø1.5+0.1
-0
4.0±0.1
1.75±0.1 1.1 max.
8.0±0.3
Direction of Feed
A
B
3.5±0.05
2.0±0.1
APart Number B
GRM18
GQM18
GNM1M
GRM21
(TV0.85mm)
GQM21
GNM21
GRM31
(TV0.85mm)
GNM31
(TV0.8mm)
GRM32
(TV0.85mm)
1.05±0.1
2.0±0.2
2.8±0.2
1.55±0.15
1.85±0.1
3.6±0.2
3.6±0.2
2.3±0.15
1.17±0.05 1.55±0.05
GNM0M 0.72 1.02
A*Part Number B*
GJM03
GRM03
GMD03
GJM15
GRM15
GMD15
LLL15
0.37 0.67
0.65 1.15
*Nominal Value
(in mm)
(in mm)
2.0±0.05 ø1.5+0.1
-
0
A
3.5±0.05
4.0±0.1
2.0±0.1
8.0±0.3
1.75±0.1
0.5 max.
(GJM03/GRM03/GMD03)
0.8 max.
(GJM15/GRM15/GMD15
LLL15/GNM0M)
Direction of Feed
B
ø330mm Reel
2.0±0.5
10±1.5 for 8mm wide tape
14±1.5 for 12mm wide tape
ø330±2.0
ø50 min.
ø13.0±0.5
ø21.0±0.8
Continued on the following page.
Continued from the preceding page.
ø180+0
-3.0
Package
129
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
Package
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
(3) Dimensions of Embossed Tape
8mm width, 4mm pitch Tape
12mm width, 8mm pitch Tape
APart Number B
GRM21
(TU1.0mm)
LLL21
LLA21, LLM21
GRM31
(TU1.15mm)
LLL31
LLA31, LLM31
GNM31
(TU1.0mm)
GRM32
(TU1.0mm)
1.45±0.2
2.8±0.2
1.9±0.2
2.25±0.2
3.5±0.2
LLL18, LLR18
LLA18 1.05±0.1 1.85±0.1
GQM22 2.8* 3.5*
3.5±0.2
A*Part Number B*
GRM43
GRM55
3.6 4.9
5.2 6.1
*Nominal Value
*Nominal Value
(in mm)
4.0±0.1
4.0±0.1
1.75±0.1
8.0±0.3
Direction of feed
A
B
2.0±0.1
0.2±0.1 (LLp)
0.25±0.1 (TV2.0mm)
0.3±0.1 (T=2.5mm)
2.5 max.
ø1.5+0.1
-0
3.5±0.05
(3.0 max. for T=1.8/2.0mm)
(3.7 max. for TU2.5mm)
8.0±0.1
4.0
±
0.1 1.75
±
0.1
12.0±0.3
Direction of feed
5.5±0.1
2.0±0.1 0.3±0.1
2.5 max.
for GRM43/55
(3.7 max. for T=2.5mm)
(4.7 max. for TU3.0mm)
ø1.5+0.1
-0
A
B
(4) Taping Method
q Tapes for capacitors are wound clockwise. The
sprocket holes are to the right as the tape is pulled
toward the user.
w Part of the leader and part of the empty tape should be
attached to the end of the tape as follows.
e The top tape and base tape are not attached at the
end of the tape for a minimum of 5 pitches.
r Missing capacitors number within 0.1% of the number
per reel or 1 pc, whichever is greater, and are not
continuous.
t The top tape and bottom tape should not protrude
beyond the edges of the tape and should not cover
sprocket holes.
y Cumulative tolerance of sprocket holes, 10 pitches:
±0.3mm.
u Peeling off force: 0.1 to 0.6N* in the direction shown
at right.
165 to 180˚
Base Tape
Top Tape
Direction of Feed
160 min. 190 min. 210 min.
(Top Tape alone)
(in mm)
Vacant Section Chip-mounting Unit Vacant Section
Leader unit
Continued on the following page.
Continued from the preceding page.
4mm width, 1mm pitch Tape
A*Part Number B*
GRM02 0.23 0.43
*Nominal Value
*GRM02
GRM03
GJM03
GMD03
}
: 0.05 to 0.5N
2.0±0.04
ø0.8±0.04 1.0±0.02
1.0±0.02
4.0±0.05
1.8±0.02 0.9±0.05
0.15 to 0.4
A
B
0.5 max.
Package
130
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
Package
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Dimensions of Bulk Case Packaging
The bulk case uses antistatic materials. Please contact
Murata for details.
6.8
8.8
12.0
2.0
3.0
1.5
110 (in mm)
36.0
31.5
Continued from the preceding page.
Package
131
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
Package
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
!Caution
1. The performance of chip monolithic ceramic capacitors
may be affected by the storage conditions.
1-1. Store capacitors in the following conditions:
Temperature of +5°C to +40°C and a Relative
Humidity of 20% to 70%.
(1) Sunlight, dust, rapid temperature changes,
corrosive gas atmosphere or high temperature
and humidity conditions during storage may affect
the solderability and the packaging performance.
Please use product within six months of receipt.
(2) Please confirm solderability before using after
six months. Store the capacitors without opening
the original bag. Even if the storage period is
short, do not exceed the specified atmospheric
conditions.
1-2. Corrosive gas can react with the termination
(external) electrodes or lead wires of capacitors, and
result in poor solderability. Do not store the
capacitors in an atmosphere consisting of corrosive
gas (e.g., hydrogen sulfide, sulfur dioxide, chlorine,
ammonia gas, etc.).
1-3. Due to moisture condensation caused by rapid
humidity changes, or the photochemical change
caused by direct sunlight on the terminal electrodes
and/or the resin/epoxy coatings, the solderability and
electrical performance may deteriorate. Do not store
capacitors under direct sunlight or in high humidity
conditions.
Storage and Operation conditions
!Caution
132
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
!Caution
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
!Caution
Rating
1. Temperature Dependent Characteristics
2. Measurement of Capacitance
1. The electrical characteristics of the capacitor can change
with temperature.
1-1. For capacitors having larger temperature
dependency, the capacitance may change with
temperature changes.
The following actions are recommended in order to
ensure suitable capacitance values.
(1) Select a suitable capacitance for the operating
temperature range.
(2) The capacitance may change within the rated
temperature.
When you use a high dielectric constant type
capacitor in a circuit that needs a tight (narrow)
capacitance tolerance. (e. g., a time constant
circuit), please carefully consider the
characteristics of these capacitors, such as their
aging, voltage, and temperature characteristics.
And check capacitors using your actual
appliances at the intended environment and
operating conditions.
1. Measure capacitance with the voltage and the frequency
specified in the product specifications.
1-1. The output voltage of the measuring equipment may
decrease occasionally when capacitance is high.
Please confirm whether a prescribed measured
voltage is impressed to the capacitor.
1-2. The capacitance values of high dielectric constant
type capacitors change depending on the AC voltage
applied. Please consider the AC voltage
characteristics when selecting a capacitor to be used
in an AC circuit.
Continued on the following page.
-20
-15
-10
-5
0
5
10
15
20
-75 -50 -25 0 25 50 75 100
Capacitance Change (%)
Temperature (°C)
Typical Temperature Characteristics R6(X5R)
Capacitance Change (%)
Temperature (°C)
Typical Temperature Characteristics F5(Y5V)
Typical Temperature Characteristics R7(X7R)
-20
-15
-10
-5
0
5
10
15
20
-75 -50 -25 0 25 50 75 100 125 150
Capacitance Change (%)
Temperature (°C)
-100
-80
-60
-40
-20
0
20
40
-50 -25 0 25 50 75 100
!Caution
133
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
!Caution
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
!Caution
3. Applied Voltage
4. Applied Voltage and Self-heating Temperature
1. Do not apply a voltage to the capacitor that exceeds the
rated voltage as called out in the specifications.
1-1. Applied voltage between the terminals of a capacitor
shall be less than or equal to the rated voltage.
(1) When AC voltage is superimposed on DC voltage,
the zero-to-peak voltage shall not exceed the
rated DC voltage.
When AC voltage or pulse voltage is applied, the
peak-to-peak voltage shall not exceed the rated
DC voltage.
(2) Abnormal voltages (surge voltage, static
electricity, pulse voltage, etc.) shall not exceed
the rated DC voltage.
1. When the capacitor is used in a high-frequency voltage,
pulse voltage, application, be sure to take into account
self-heating may be caused by resistant factors of the
capacitor.
1-1. The load should be contained to the level such that
when measuring at atmospheric temperature of 25°C,
the product's self-heating remains below 20°C and
surface temperature of the capacitor in the actual
circuit remains within the maximum operating
temperature.
1-2. Influence of overvoltage
Overvoltage that is applied to the capacitor may
result in an electrical short circuit caused by the
breakdown of the internal dielectric layers.
The time duration until breakdown depends on the
applied voltage and the ambient temperature.
Continued on the following page.
Continued from the preceding page.
Typical Voltage Applied to the DC Capacitor
(E: Maximum possible applied voltage.)
DC Voltage DC Voltage+AC AC Voltage Pulse Voltage
E
0
E
0
E0E
0
!Caution
134
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
!Caution
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
!Caution
5. DC Voltage and AC Voltage Characteristics
1. The capacitance value of a high dielectric constant type
capacitor changes depending on the DC voltage applied.
Please consider the DC voltage characteristics when a
capacitor is selected for use in a DC circuit.
1-1. The capacitance of ceramic capacitors may change
sharply depending on the applied voltage (see
figure).
Please confirm the following in order to secure the
capacitance.
(1) Whether the capacitance change caused by the
applied voltage is within the range allowed or not.
(2) In the DC voltage characteristics, the rate of
capacitance change becomes larger as voltage
increases, even if the applied voltage is below
the rated voltage. When a high dielectric constant
type capacitor is in a circuit that needs a tight
(narrow) capacitance tolerance (e. g., a time
constant circuit), please carefully consider the
characteristics of these capacitors, such as their
aging, voltage, and temperature characteristics.
In addition, check capacitors using your actual
appliances at the intended environment and
operating conditions.
2. The capacitance values of high dielectric constant type
capacitors change depending on the AC voltage applied.
Please consider the AC voltage characteristics when
selecting a capacitor to be used in an AC circuit.
Continued on the following page.
Continued from the preceding page.
-60
-50
-40
-30
-20
-10
0
10
20
30
0.0 0.5 1.0 1.5 2.0 2.5
AC Voltage (Vr.m.s.)
6. Capacitance Aging
1. The high dielectric constant type capacitors have the
characteristic in which the capacitance value decreases
with passage of time.
When you use a high dielectric constant type capacitors
in a circuit that needs a tight (narrow) capacitance
tolerance (e. g., a time constant circuit), please carefully
consider the characteristics of these capacitors, such as
their aging, voltage, and temperature characteristics. In
addition, check capacitors using your actual appliances at
the intended environment and operating conditions.
-100
-80
-60
-40
-20
0
20
01234567
DC Voltage (VDC)
[DC Voltage Characteristics]
[AC Voltage Characteristics]
Capacitance Change (%)Capacitance Change (%)
-40
-30
-20
-10
0
10
20
10 100 1000 10000
5C
R
Time (Hr)
Capacitor Change (%)
!Caution
135
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
!Caution
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
!Caution
7. Vibration and Shock
1. The capacitor's mechanical stress (vibration and shock)
shall be specified for the use environment.
Please confirm the kind of vibration and/or shock, its
condition, and any generation of resonance.
Please mount the capacitor so as not to generate
resonance, and do not allow any impact on the terminals.
2. Mechanical shock due to being dropped may cause
damage or a crack in the dielectric material of the
capacitor.
Do not use a dropped capacitor because the quality and
reliability may be deteriorated.
3. When printed circuit boards are piled up or handled, the
corners of another printed circuit board should not be
allowed to hit the capacitor, in order to avoid a crack or
other damage to the capacitor.
Continued from the preceding page.
Floor
Crack
Crack
Mounting printed circuit board
!Caution
136
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
!Caution
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
!Caution
Soldering and Mounting
1. Confirm the best mounting position and direction that
minimizes the stress imposed on the capacitor during
flexing or bending the printed circuit board.
1-1. Choose a mounting position that minimizes the
stress imposed on the chip during flexing or bending
of the board.
1. Mounting Position
Locate chip
horizontal to the
direction in
which stress
acts.
Chip arrangement
Worst A-C-(B~D) Best
[Component Direction]
[Chip Mounting Close to Board Separation Point]
A
B
D
C
Perforation
Slit
2. Information before Mounting
1. Do not reuse capacitors that were removed from the
equipment.
2. Confirm capacitance characteristics under actual applied
voltage.
3. Confirm the mechanical stress under actual process and
equipment use.
4. Confirm the rated capacitance, rated voltage and other
electrical characteristics before assembly.
5. Prior to use, confirm the solderability of capacitors that
were in long-term storage.
6. Prior to measuring capacitance, carry out a heat
treatment for capacitors that were in long-term storage.
7. The use of Sn-Zn based solder will deteriorate the
reliability of the MLCC.
Please contact our sales representative or product
engineers on the use of Sn-Zn based solder in advance.
Continued on the following page.
3. Maintenance of the Mounting (pick and place) Machine
1. Make sure that the following excessive forces are not
applied to the capacitors.
1-1. In mounting the capacitors on the printed circuit
board, any bending force against them shall be kept
to a minimum to prevent them from any bending
damage or cracking. Please take into account the
following precautions and recommendations for use
in your process.
(1) Adjust the lowest position of the pickup nozzle so
as not to bend the printed circuit board.
(2) Adjust the nozzle pressure within a static load of
1N to 3N during mounting.
2. Dirt particles and dust accumulated between the suction
nozzle and the cylinder inner wall prevent the nozzle from
moving smoothly. This imposes greater force upon the
chip during mounting, causing cracked chips. Also the
locating claw, when worn out, imposes uneven forces on
the chip when positioning, causing cracked chips. The
suction nozzle and the locating claw must be maintained,
checked and replaced periodically.
Board Guide
[Correct]
Suction Nozzle
Board
Support Pin
[Incorrect]
Deflection
!Caution
137
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
!Caution
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
!Caution
4-1. Reflow Soldering
1. When sudden heat is applied to the components, the
mechanical strength of the components will decrease
because a sudden temperature change causes
deformation inside the components. In order to prevent
mechanical damage to the components, preheating is
required for both the components and the PCB board.
Preheating conditions are shown in table 1. It is required to
keep the temperature differential between the solder and
the component's surface (T) as small as possible.
2. Solderability of Tin plating termination chips might be
deteriorated when a low temperature soldering profile
where the peak solder temperature is below the melting
point of Tin is used. Please confirm the Solderability of Tin
plated termination chips before use.
3. When components are immersed in solvent after mounting,
be sure to maintain the temperature difference (T)
between the component and the solvent within the range
shown in the table 1.
GRM02/03/15/18/21/31
GJM03/15
LLL15/18/21/31
LLR18
GQM18/21
GRM32/43/55
LLA18/21/31
LLM21/31
GNM
GQM22
TV190°C
TV130°C
Part Number Temperature Differential
Table 1
Recommended Conditions
[Standard Conditions for Reflow Soldering]
[Allowable Reflow Soldering Temperature and Time]
In a case of repeated soldering, the accumulated
soldering time must be within the range shown above.
,,,
,,,
,,,







Soldering Time (sec.)
260
270
280
250
240
230
2200 30 60 90 120
Soldering Temperature (D)
Inverting the PCB
Make sure not to impose any abnormal mechanical shocks
to the PCB.
Continued from the preceding page.
Continued on the following page.
Peak Temperature
Atmosphere
Pb-Sn Solder
Infrared Reflow
230 to 250°C
Air
Vapor Reflow
230 to 240°C
Air
Lead Free Solder
240 to 260°C
Air or N2
Infrared Reflow
Vapor Reflow
60-120 seconds 30-60 seconds
,,,
,,,
,,,









T
Gradual
Cooling
Soldering
Preheating
200°C
170°C
150°C
130°C
Time
Temperature (D)
Peak Temperature
60-120 seconds 20 seconds max.
T
Gradual
Cooling
Soldering
Preheating
170°C
150°C
130°C
Time
Temperature (D)
Peak Temperature
,,,
,,,
,,,









Pb-Sn Solder: Sn-37Pb
Lead Free Solder: Sn-3.0Ag-0.5Cu
4. Optimum Solder Amount for Reflow Soldering
4-1. Overly thick application of solder paste results in a
excessive solder fillet height.
This makes the chip more susceptible to mechanical
and thermal stress on the board and may cause the
chips to crack.
4-2. Too little solder paste results in a lack of adhesive
strength on the outer electrode, which may result in
chips breaking loose from the PCB.
4-3. Make sure the solder has been applied smoothly to
the end surface to a height of 0.2mm* min.
0.2mm min.
GRM02/03: 1/3 of Chip Thickness min. in section
!Caution
138
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
!Caution
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
!Caution
5. Optimum Solder Amount for Flow Soldering
5-1. The top of the solder fillet should be lower than the
thickness of components. If the solder amount is
excessive, the risk of cracking is higher during board
bending or any other stressful condition.
GRM18/21/31
LLL21/31
GQM18/21
TV150°C
Part Number Temperature Differential
Table 2
[Standard Conditions for Flow Soldering]
[Allowable Flow Soldering Temperature and Time]
In a case of repeated soldering, the accumulated
soldering time must be within the range shown above.
,,,
,,,








Soldering Time (sec.)
260
270
280
250
240
230
220010203040
Soldering Temperature (D)
Up to Chip Thickness
Adhesive
Continued from the preceding page.
Continued on the following page.
Recommended Conditions
Soldering Peak Temperature
Atmosphere
Pb-Sn Solder
240 to 250°C
Air
Lead Free Solder
250 to 260°C
Preheating Peak Temperature 90 to 110°C 100 to 120°C
N2
30-90 seconds 5 seconds max.
T
Gradual
Cooling
Soldering
Preheating
Preheating
Peak
Temperature
Time
Temperature (D)
Soldering
Peak
Temperature
Pb-Sn Solder: Sn-37Pb
Lead Free Solder: Sn-3.0Ag-0.5Cu
4-2. Flow Soldering
1. When sudden heat is applied to the components, the
mechanical strength of the components will decrease
because a sudden temperature change causes
deformation inside the components. In order to prevent
mechanical damage in the components, preheating
should be required for both of the components and the
PCB board.
Preheating conditions are shown in table 2. It is required
to keep the temperature differential between the solder
and the component's surface (T) as small as possible.
2. Excessively long soldering time or high soldering
temperature can result in leaching of the outer electrodes,
causing poor adhesion or a reduction in capacitance
value due to loss of contact between electrodes and end
termination.
3. When components are immersed in solvent after
mounting, be sure to maintain the temperature difference
(T) between the component and solvent within the range
shown in the table 2.
4. Do not apply flow soldering to chips not listed in table 2.
,,,,
,,,,
,,,,









in section
!Caution
139
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
!Caution
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
!Caution
Solder Amount
in section
4-3. Correction with a Soldering Iron
1. When sudden heat is applied to the components when
using a soldering iron, the mechanical strength of the
components will decrease because the extreme
temperature change can cause deformations inside the
components. In order to prevent mechanical damage to
the components, preheating is required for both the
components and the PCB board. Preheating conditions,
(The "Temperature of the Soldering Iron Tip", "Preheating
Temperature," "Temperature Differential" between the
iron tip and the components and the PCB), should be
within the conditions of table 3. It is required to keep the
temperature differential between the soldering iron and
the component surfaces (T) as small as possible.
2. After soldering, do not allow the component/PCB to
rapidly cool down.
3. The operating time for the re-working should be as short
as possible. When re-working time is too long, it may
cause solder leaching, in turn causing a reduction in the
adhesive strength of the terminations.
4. Optimum Solder amount when re-working with a
Soldering lron
4-1. For sizes smaller than 0603, (GRM03/15/18,
GJM03/15, GQM18), the top of the solder fillet
should be lower than 2/3's of the thickness of the
component or 0.5mm whichever is smaller. For 0805
and larger sizes, (GRM21/31/32/43/55, GQM21/22),
the top of the solder fillet should be lower than 2/3's
of the thickness of the component. If the solder
amount is excessive, the risk of cracking is higher
during board bending or under any other stressful
condition.
4-2. A soldering iron with a tip of ø3mm or smaller should
be used. It is also necessary to keep the soldering
iron from touching the components during the
re-work.
4-3. Solder wire with ø0.5mm or smaller is required for
soldering.
GRM03/15/18/21/31
GJM03/15
GQM18/21
GRM32/43/55
GQM22
TV190°C
TV130°C
Part Number
Temperature
Differential
(T)
Table 3
Continued from the preceding page.
4-4. Leaded Component Insertion
1. If the PCB is flexed when leaded components (such as
transformers and ICs) are being mounted, chips may
crack and solder joints may break.
Before mounting leaded components, support the PCB
using backup pins or special jigs to prevent warping.
5. Washing
Excessive ultrasonic oscillation during cleaning can cause
the PCBs to resonate, resulting in cracked chips or broken
solder joints. Take note not to vibrate PCBs.
Air
Air
Atmosphere
350°C max.
280°C max.
Temperature
of Soldering
Iron Tip
150°C min.
150°C min.
Preheating
Temperature
*Applicable for both Pb-Sn and Lead Free Solder.
Pb-Sn Solder: Sn-37Pb
Lead Free Solder: Sn-3.0Ag-0.5Cu
Continued on the following page.
!Caution
140
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
!Caution
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
!Caution
6. Electrical Test on Printed Circuit Board
1. Confirm position of the support pin or specific jig, when
inspecting the electrical performance of a capacitor after
mounting on the printed circuit board.
1-1. Avoid bending printed circuit board by the pressure
of a test pin, etc.
The thrusting force of the test probe can flex the PCB,
resulting in cracked chips or open solder joints.
Provide support pins on the back side of the PCB to
prevent warping or flexing.
1-2. Avoid vibration of the board by shock when a test pin
contacts a printed circuit board.
7. Printed Circuit Board Cropping
1. After mounting a capacitor on a printed circuit board, do
not apply any stress to the capacitor that is caused by
bending or twisting the board.
1-1. In cropping the board, the stress as shown right may
cause the capacitor to crack.
Try not to apply this type of stress to a capacitor.
2. Ascertain of the cropping method for the printed circuit
board in advance.
2-1. Printed circuit board cropping shall be carried out by
using a jig or an apparatus to prevent the mechanical
stress that can occur to the board.
(1) Example of a suitable jig
Recommended example: the board should be
pushed as close to the cropping jig as possible
and from the back side of board in order to
minimize the compressive stress applied to
capacitor.
Not recommended example: when the board is
pushed at a point far from the cropping jig and
from the front side of board as below, the
capacitor may form a crack caused by the tensile
stress applied to capacitor.
Continued from the preceding page.
Continued on the following page.
[Not Recommended]
[Recommended]
Peeling
Test-pin
Support Pin
Test-pin
[Bending]
[Twisting]
[Outline of Jig]
Load Point
Load Point
Board Cropping Jig
V-groove
Printed Circuit Board
Components
Components
Printed Circuit Board
Direction of Load Direction of Load
Printed Circuit Board
Not recommendedRecommended
!Caution
141
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
!Caution
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
!Caution
(2) Example of a suitable machine
An outline of a printed circuit board cropping
machine is shown as follows. Along the lines with
the V-grooves on the printed circuit board, the top
and bottom blades are aligned to one another
when cropping the board.
The misalignment of the position between top and
bottom blades may cause the capacitor to crack.
Continued from the preceding page.
V-groove
Printed Circuit Board
[Outline of Machine]
[Principle of Operation]
[Cross-section Diagram]
Top Blade
Top Blade
Bottom Blade
Bottom Blade
Top Blade
Bottom Blade
Top Blade
Bottom Blade
Top Blade
Bottom Blade
Top Blade
Printed Circuit Board
V-groove
Recommended Not Recommended
Top-bottom Misalignment Left-right Misalignment Front-rear Misalignment
!Caution
142
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
!Caution
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
!Caution
1. Under Operation of Equipment
1-1. Do not touch a capacitor directly with bare hands
during operation in order to avoid the danger of an
electric shock.
1-2. Do not allow the terminals of a capacitor to come in
contact with any conductive objects (short-circuit).
Do not expose a capacitor to a conductive liquid,
including any acid or alkali solutions.
1-3. Confirm the environment in which the equipment will
operate is under the specified conditions.
Do not use the equipment under the following
environments.
(1) Being spattered with water or oil.
(2) Being exposed to direct sunlight.
(3) Being exposed to Ozone, ultraviolet rays or
radiation.
(4) Being exposed to toxic gas (e.g., hydrogen sulfide,
sulfur dioxide, chlorine, ammonia gas, etc.)
(5) Any vibrations or mechanical shocks exceeding
the specified limits.
(6) Moisture condensing environments.
1-4. Use damp proof countermeasures if using under any
conditions that can cause condensation.
2. Others
2-1. In an Emergency
(1) If the equipment should generate smoke, fire or
smell, immediately turn off or unplug the
equipment.
If the equipment is not turned off or unplugged,
the hazards may be worsened by supplying
continuous power.
(2) In this type of situation, do not allow face and
hands to come in contact with the capacitor or
burns may be caused by the capacitor's high
temperature.
2-2. Disposal of Waste
When capacitors are disposed, they must be burned
or buried by an industrial waste vendor with the
appropriate licenses.
2-3. Circuit Design
GRM, GCM, GMA/D, LLL/A/M, GQM, GJM, GNM
Series capacitors in this catalog are not safety
certified products.
2-4. Remarks
Failure to follow the cautions may result, worst case,
in a short circuit and smoking when the product is
used.
The above notices are for standard applications and
conditions. Contact us when the products are used in
special mounting conditions.
Select optimum conditions for operation as they
determine the reliability of the product after assembly.
The data herein are given in typical values, not
guaranteed ratings.
Others
!Caution
143
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
!Caution
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Notice
1. Operating Temperature
1. The operating temperature limit depends on the
capacitor.
1-1. Do not apply temperatures exceeding the upper
operating temperature.
It is necessary to select a capacitor with a suitable
rated temperature that will cover the operating
temperature range.
Also it is necessary to consider the temperature
distribution in equipment and the seasonal
temperature variable factor.
1-2. Consider the self-heating of the capacitor.
The surface temperature of the capacitor shall be
the upper operating temperature or less when
including the self-heating factors.
2. Atmosphere Surroundings (gaseous and liquid)
1. Restriction on the operating environment of capacitors.
1-1. Capacitors, when used in the above, unsuitable,
operating environments may deteriorate due to
the corrosion of the terminations and the
penetration of moisture into the capacitor.
1-2. The same phenomenon as the above may occur
when the electrodes or terminals of the capacitor
are subject to moisture condensation.
1-3. The deterioration of characteristics and insulation
resistance due to the oxidization or corrosion of
terminal electrodes may result in breakdown when
the capacitor is exposed to corrosive or volatile
gases or solvents for long periods of time.
3. Piezo-electric Phenomenon
1. When using high dielectric constant type capacitors in
AC or pulse circuits, the capacitor itself vibrates at
specific frequencies and noise may be generated.
Moreover, when the mechanical vibration or shock is
added to the capacitor, noise may occur.
Rating
Notice
144
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
Notice
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Notice
Soldering and Mounting
1. PCB Design
1. Notice for Pattern Forms
1-1. Unlike leaded components, chip components are
susceptible to flexing stresses since they are
mounted directly on the substrate.
They are also more sensitive to mechanical and
thermal stresses than leaded components.
Excess solder fillet height can multiply these stresses
and cause chip cracking. When designing substrates,
take land patterns and dimensions into consideration
to eliminate the possibility of excess solder fillet
height.
1-2. It is possible for the chip to crack by the expansion
and shrinkage of a metal board. Please contact us if
you want to use our ceramic capacitors on a metal
board such as Aluminum.
Chassis
Solder (ground)
Electrode Pattern
Solder Resist
Solder Resist
Solder Resist
Lead Wire
Soldering Iron
Lead Wire
Solder Resist
Continued on the following page.
Pattern Forms
Placing Close to Chassis
Placing
of Chip Components
and Leaded Components
Placing
of Leaded Components
after Chip Component
Lateral Mounting
Prohibited Correct
Notice
145
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
Notice
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Notice
GRM18
GQM18
GRM21
GQM21
GRM31
LLL21
LLL31
1.6g0.8
2.0g1.25
3.2g1.6
1.25g2.0
1.6g3.2
0.6 to 1.0
1.0 to 1.2
2.2 to 2.6
0.4 to 0.7
0.6 to 1.0
0.8 to 0.9
0.9 to 1.0
1.0 to 1.1
0.5 to 0.7
0.8 to 0.9
0.6 to 0.8
0.8 to 1.1
1.0 to 1.4
1.4 to 1.8
2.6 to 2.8 (in mm)
Part Number Dimensions Chip (LgW)abc
Table 1 Flow Soldering Method
GRM02
GRM03
GJM03
GRM15
GJM15
GRM18
GQM18
GRM21
GQM21
GRM31
GRM32
GRM43
GRM55
LLL15
LLL18
LLR18
LLL21
LLL31
GQM22
0.4g0.2
0.6g0.3
1.0g0.5
1.6g0.8
2.0g1.25
3.2g1.6
3.2g2.5
4.5g3.2
5.7g5.0
0.5g1.0
0.8g1.6
1.25g2.0
1.6g3.2
3.2g2.5
0.16 to 0.2
0.2 to 0.3
0.3 to 0.5
0.6 to 0.8
1.0 to 1.2
2.2 to 2.4
2.0 to 2.4
3.0 to 3.5
4.0 to 4.6
0.15 to 0.2
0.2 to 0.3
0.4 to 0.6
0.6 to 0.8
2.2 to 2.5
0.12 to 0.18
0.2 to 0.35
0.35 to 0.45
0.6 to 0.7
0.6 to 0.7
0.8 to 0.9
1.0 to 1.2
1.2 to 1.4
1.4 to 1.6
0.2 to 0.25
0.3 to 0.4
0.4 to 0.5
0.6 to 0.7
0.8 to 1.0
0.2 to 0.23
0.2 to 0.4
0.4 to 0.6
0.6 to 0.8
0.8 to 1.1
1.0 to 1.4
1.8 to 2.3
2.3 to 3.0
3.5 to 4.8
0.7 to 1.0
1.4 to 1.6
1.4 to 1.8
2.6 to 2.8
1.9 to 2.3 (in mm)
Part Number Dimensions Chip (LgW)abc
Table 2 Reflow Soldering Method
Chip Capacitor
Continued from the preceding page.
Continued on the following page.
2. Land Dimensions
2-1. A chip capacitor can be cracked due to the stress of
PCB bending / etc if the land area is larger than
needed and has an excess amount of solder.
Please refer to the land dimensions in table 1 for flow
soldering, table 2 for reflow soldering, table 3 for
GNM & LLA, and table 4 for LLM.
Please confirm the suitable land dimension by
evaluating the actual SET / PCB.
Solder Resist
ab
c
Land
Notice
146
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
Notice
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Notice
GNM0M2
GNM1M2
GNM212
GNM214
GNM314
LLA18
LLA21
LLA31
0.9
1.37
2.0
2.0
3.2
1.6
2.0
3.2
0.6
1.0
1.25
1.25
1.6
0.8
1.25
1.6
0.12 to 0.20*
0.4 to 0.5
0.6 to 0.7
0.6 to 0.7
0.8 to 1.0
0.3 to 0.4
0.5 to 0.7
0.7 to 0.9
0.35 to 0.40*
0.35 to 0.45
0.5 to 0.7
0.5 to 0.7
0.7 to 0.9
0.25 to 0.35
0.35 to 0.6
0.4 to 0.7
0.3
0.3 to 0.35
0.4 to 0.5
0.25 to 0.35
0.3 to 0.4
0.15 to 0.25
0.2 to 0.3
0.3 to 0.4
0.45
0.64
1.0
0.5
0.8
0.4
0.5
0.8
Part Number LWabcp
Dimensions (mm)
Table 3 GNM, LLA Series for Reflow Soldering Land Dimensions
a
Land
Chip Capacitor
Chip Capacitor
b
cp
Continued from the preceding page.
2. Adhesive Application
1. Thin or insufficient adhesive can cause the chips to
loosen or become disconnected during flow soldering.
The amount of adhesive must be more than dimension c,
shown in the drawing at right, to obtain the correct
bonding strength.
The chip's electrode thickness and land thickness must
also be taken into consideration.
2. Low viscosity adhesive can cause chips to slip after
mounting. The adhesive must have a viscosity of
5000Pa s (500ps) min. (at 25°C).
3. Adhesive Coverage
Land
Adhesive
Board
Chip Capacitor
a
b
c
c=50 to 105µm
b=30 to 35µm
a=20 to 70µm
Continued on the following page.
GRM18, GQM18
GRM21, LLL21, GQM21
GRM31, LLL31
0.05mg min.
0.1mg min.
0.15mg min.
Part Number Adhesive Coverage*
*Nominal Value
a
Chip Capacitor
b
cpLand
GNMpp2GNMpp4
LLA
LLM21
LLM31
0.3
0.4
Part Number c, c'
(0.3 to 0.5)
(0.3 to 0.5)
b, b'
1.3 to 1.8
1.6 to 2.0
e
2.0 to 2.6
3.2 to 3.6
d
0.6 to 0.8
1.0
a
1.4 to 1.6
2.6
f
0.5
0.8
p
Dimensions (mm)
Table 4 LLM Series for Reflow Soldering Land Dimensions
LLM
b=(c-e)/2, b'=(d-f)/2
b
b'
f
d
p c
c'
a
e
* 0.82Va+2bV1.00
Notice
147
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
Notice
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Notice
1. Please evaluate a capacitor by actual cleaning equipment
and conditions to confirm the quality and select the
applicable solvent.
2. Unsuitable cleaning solvent may leave residual flux or
other foreign substances, causing deterioration of
electrical characteristics and the reliability of the
capacitors.
3. Select the proper cleaning conditions.
3-1. Improper cleaning conditions (excessive or
insufficient) may result in the deterioration of the
performance of the capacitors.
6. Washing
Continued from the preceding page.
4. Flux Application
1. An excessive amount of flux generates a large quantity of
flux gas, which can cause a deterioration of Solderability.
Therefore apply flux thinly and evenly throughout. (A
foaming system is generally used for flow soldering.)
2. Flux containing too high a percentage of halide may
cause corrosion of the outer electrodes unless there is
sufficient cleaning. Use flux with a halide content of 0.2%
max.
3. Do not use strong acidic flux.
4. Do not use water-soluble *flux.
(*Water-soluble flux can be defined as non rosin type flux
including wash-type flux and non-wash-type flux.)
3. Adhesive Curing
1. Insufficient curing of the adhesive can cause chips to
disconnect during flow soldering and deterioration in the
insulation resistance between the outer electrodes due to
moisture absorption.
Control curing temperature and time in order to prevent
insufficient hardening.
Continued on the following page.
o Set temperature and time to ensure that leaching of the
outer electrode does not exceed 25% of the chip end
area as a single chip (full length of the edge A-B-C-D
shown right) and 25% of the length A-B shown below as
mounted on substrate.
[As a Single Chip]
[As Mounted on Substrate]
5. Flow Soldering
A
B
C
D
Outer Electrode
A
B
Notice
148
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
Notice
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Notice
1. A crack may be caused in the capacitor due to the stress
of the thermal contraction of the resin during curing
process.
The stress is affected by the amount of resin and curing
contraction.
Select a resin with small curing contraction.
The difference in the thermal expansion coefficient
between a coating resin or a molding resin and the
capacitor may cause the destruction and deterioration of
the capacitor such as a crack or peeling, and lead to the
deterioration of insulation resistance or dielectric
breakdown.
Select a resin for which the thermal expansion coefficient
is as close to that of capacitor as possible.
A silicone resin can be used as an under-coating to buffer
against the stress.
2. Select a resin that is less hygroscopic.
Using hygroscopic resins under high humidity conditions
may cause the deterioration of the insulation resistance of
a capacitor.
An epoxy resin can be used as a less hygroscopic resin.
7. Coating
1. Die Bonding of Capacitors
• Use the following materials for the Brazing alloys:
Au-Sn (80/20) 300 to 320 °C in N2 atmosphere
• Mounting
(1) Control the temperature of the substrate so it
matches the temperature of the brazing alloy.
(2) Place the brazing alloy on the substrate and place
the capacitor on the alloy. Hold the capacitor and
gently apply the load. Be sure to complete the
operation within 1 minute.
2. Wire Bonding
• Wire
Gold wire: 25 micro m (0.001 inch) diameter
• Bonding
(1) Thermo compression, ultrasonic ball bonding.
(2) Required stage temperature: 150 to 200 °C
(3) Required wedge or capillary weight: 0.2N to 0.5N
(4) Bond the capacitor and base substrate or other
devices with gold wire.
8. Die Bonding/Wire Bonding (GMA or GMD Series)
Continued from the preceding page.
Notice
149
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
Notice
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Notice
1. Transportation
1. The performance of a capacitor may be affected by the
conditions during transportation.
1-1. The capacitors shall be protected against
excessive temperature, humidity and mechanical
force during transportation.
(1) Climatic condition
• low air temperature: -40°C
• change of temperature air/air: -25°C/+25°C
• low air pressure: 30 kPa
• change of air pressure: 6 kPa/min.
(2) Mechanical condition
Transportation shall be done in such a way that
the boxes are not deformed and forces are not
directly passed on to the inner packaging.
1-2. Do not apply excessive vibration, shock, and
pressure to the capacitor.
(1) When excessive mechanical shock or pressure
is applied to a capacitor, chipping or cracking
may occur in the ceramic body of the capacitor.
(2) When the sharp edge of an air driver, a
soldering iron, tweezers, a chassis, etc.
impacts strongly on the surface of capacitor,
the capacitor may crack and short-circuit.
1-3. Do not use a capacitor to which excessive shock
was applied by dropping, etc.
The capacitor dropped accidentally during
processing may be damaged.
Others
Notice
150
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
Notice
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
1
GRM21 for flow/reflow soldering 95 to 100% 95 to 100% 95% 90 to 95% 95%
1. Solderability
(1) Test Method
Subject the chip capacitor to the following conditions.
Then apply flux (an ethanol solution of 25% rosin) to the
chip and dip it in 230D eutectic solder for 2 seconds.
Conditions:
Expose prepared at room temperature (for 6 months and
12 months, respectively)
Prepared at high temperature (for 100 hours at 85D)
Prepared left at high humidity (for 100 hours under
90%RH to 95%RH at 40D)
(2) Test Samples
GRM21 : Products for flow/reflow soldering.
(3) Acceptance Criteria
With a 60-power optical microscope, measure the surface
area of the outer electrode that is covered with solder.
(4) Results
Refer to Table 1.
Sample Initial State
Prepared at Room Temperature
6 months 12 months
Prepared at High Humidity
for 100 Hours at 90 to
95% RH and 40D
Prepared at High
Temperature for
100 Hours at 85D
Table 1
2. Board Bending Strength for Solder Fillet Height
(1) Test Method
Solder the chip capacitor to the test PCB with the amount
of solder paste necessary to achieve the fillet heights.
Then bend the PCB using the method illustrated and
measure capacitance.
(2) Test Samples
GRM21: 5C/R7/F5 Characteristics T=0.6mm
(3) Acceptance Criteria
Products should be determined to be defective if the
change in capacitance has exceeded the values specified
in Table 2.
Characteristics Change in Capacitance
5C Within T5% or T0.5pF, whichever is greater
Within T12.5%
Within T20%
R7
F5
Table 2
Capacitor
Supporting
Base
45 45
Capacitance Meter
Flexure
20 50
R230
Pressurizing
Speed: 1.0mm/sec.
Note : The material of pressure application jig and
support is the quenched metal.
(hardness HB 183
-
255 or superhardness
HRA90 or more)
Solder Amount Larger Fillet.
Fillet up to Chip
Thickness
Pressurize
,


QS
S
T
T
UVVW
X
YYZZ
[\
]^_
`
`¢¤
¤
¥
¥
¦§§¨
©
ªª««
¬
®¯°
±
±
,


QR
SSTT
U
VWWX
Y
Y
Z
Z\
]
]
^_`
¢£
¤¤¥¥
¦
§¨¨©
ª
ª
«
«
®
®
¯°±
VYZ[^§ª«¬¯
Material : Glass Epoxy
: Copper Foil (0.35mm thick)
: Solder Resist
100 4.0
40
1.6
1.0
1.65
1.2
(in mm)
Continued on the following page.
Reference Data
151
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
Reference Data
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
(4) Results
GRM21 5C (T=0.6) GRM21 R7 (T=0.6)
GRM21 F5 (T=0.6)
3. Temperature Cycling for Solder Fillet Height
(1) Test Method
Solder the chips to the substrate of various test fixtures
using sufficient amounts of solder to achieve the required
fillet height. Then subject the fixtures to the cycle
illustrated at right 200 times.
q Solder Amount
Alumina substrates are typically designed for reflow
soldering.
Glass epoxy or paper phenol substrates are typically
used for flow soldering.
w Material
Alumina (Thickness: 0.64mm)
Glass epoxy (Thickness: 1.64mm)
Paper phenol (Thickness: 1.64mm)
e Land Dimension
Solder Amount
q
w
e
Alumina
Substrate
Solder to be used
Glass Epoxy
or Paper Phenol
0.5T
0.7T
T
T
1.3T
1.6T
6Z4 Eutectic solder
[Solder Amount]
0
20
40
60
80
100
02468
Flexure (mm)
0
20
40
60
80
100
02468
0
20
40
60
80
100
02468
Survival Rate (%)
Flexure (mm)
Survival Rate (%)
Flexure (mm)
Survival Rate (%)
,

QRSSTUVWXX
Y
YZ[
\]^
^
_`
¢£¤¤¥¦§¨©©
ª
ª«¬
®¯
¯
°±
Larger Fillet
,,

QQRSTT
U
U
V
VWX
YZ
Z
[
[
\]^__``
¢¢£¤¥¥
¦
¦
§
§¨©
ª«
«
¬
¬
®¯°°±±
,

QRRSSTUV
W
W
X
X
Y
Y
Z[\
\
]]^^_`
¢££¤¤¥¦§
¨
¨
©
©
ª
ª
«¬
®®¯¯°±
Fillet up to Chip
Thickness
Larger Fillet
Larger Fillet
Fillet up to Chip
Thickness
Fillet up to Chip
Thickness
[Temperature Cycling]
+125D
Room Temperature
-
55D
Time (min.)
30 5 305
Ag/Pd=72/28
Thickness: 10 to 12µm
Cu
Thickness: 35
µm
Alumina
Substrate
Glass Epoxy
Substrate
Paper Phenol
Substrate
[Land Dimension]
1.5 1.51.2
1.5
Land Pattern
Continued from the preceding page.
Continued on the following page.
(in mm)
Reference Data
152
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
Reference Data
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
(4) Results
(2) Test Samples
GRM21 5C/R7/F5 Characteristics T=0.6mm
(3) Acceptance Criteria
Products are determined to be defective if the change in
capacitance has exceeded the values specified in Table 3.
Characteristics Change in Capacitance
5C Within T2.5% or T0.25pF, whichever is greater
Within T7.5%
Within T20%
R7
F5
Table 3
Alumina Substrate (Thickness 0.64mm)
Glass Epoxy Substrate (Thickness 1.6mm)
Paper Phenol Substrate (Thickness 1.6mm)
GRM21 5C (T=0.6)
qw
e
100
80
60
40
20
00 50 100 150 200
Number of Cycles
Accumulated Per-
cent Defective (%)
GRM21 R7 (T=0.6)
q
w
e
100
80
60
40
20
00 50 100 150 200
Number of Cycles
Accumulated Per-
cent Defective (%)
GRM21 F5 (T=0.6)
q
w
e
100
80
60
40
20
00 50 100 150 200
Number of Cycles
Accumulated Per-
cent Defective (%)
GRM21 R7 (T=0.6)
qw
e
100
80
60
40
20
00 50 100 150 200
Number of Cycles
Accumulated Per-
cent Defective (%)
GRM21 F5 (T=0.6)
qw
e
100
80
60
40
20
00 50 100 150 200
Number of Cycles
Accumulated Per-
cent Defective (%)
GRM21 5C (T=0.6)
qwe
100
80
60
40
20
00 50 100 150 200
Number of Cycles
Accumulated Per-
cent Defective (%)
GRM21 5C (T=0.6)
qw
100
80
60
40
20
00 50 100 150 200
Number of Cycles
Accumulated Per-
cent Defective (%)
e
GRM21 R7 (T=0.6)
qw
100
80
60
40
20
00 50 100 150 200
Number of Cycles
Accumulated Per-
cent Defective (%)
e
GRM21 F5 (T=0.6)
qw
100
80
60
40
20
00 50 100 150 200
Number of Cycles
Accumulated Per-
cent Defective (%)
e
Continued from the preceding page.
Continued on the following page.
Reference Data
153
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
Reference Data
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
4. Board Bending Strength for Board Material
(1) Test Method
Solder the chip to the test board. Then bend the board
using the method illustrated below, to measure
capacitance.
(2) Test Samples
GRM21 5C/R7/F5 Characteristics T=0.6mm typical
(3) Acceptance Criteria
Products should be determined to be defective if the
change in capacitance has exceeded the values specified
in Table 4.
(4) Results
5C
R7
F5
Table 4
GRM21 5C (T=0.6) GRM21 R7 (T=0.6)
GRM21 F5 (T=0.6)
Capacitor
Supporting
Base
45 45
Capacitance Meter
Flexure
20 50
R230
Pressurizing
Speed: 1.0mm/sec.
Note : Material of the pressurizing jig and
the supporting base must be hardened steel
(Hardness : HB183 to 255 or carbide Hardness
: HRA90 min.)
Solder Amount
(in mm)
Up to Chip
Thickness
Pressurize
,



QR
R
STUU
VW
XXY
Z
[\\]
^
^
_
_¢£
£
¤¥¦¦
§¨
©©ª
«
¬®
¯
¯
°
°
,,

QQRR
ST
UVW
X
X
Y[
[
\
\
]^^_
`
¢¢££
¤¥
¦§¨
©
©
ª¬
¬
®¯¯°
±
UXY\¦©ª
: Copper Foil (0.035mm thick)
: Solder Resist
100 4.0
40
1.6
1.0
1.65
1.2
Characteristics Change in Capacitance
Within T5% or T0.5pF, whichever is greater
Within T12.5%
Within T20%
0
20
40
60
80
100
02468
Flexure (mm)
0
20
40
60
80
100
02468
0
20
40
60
80
100
02468
Survival Rate (%)
Flexure (mm)
Survival Rate (%)
Flexure (mm)
Survival Rate (%)
,
,

Q
Q
R
R
ST
T
U
U
VWWXXYZZ[[\\
]
]
^
^__`¢
¢
£
£
¤¥
¥
¦
¦
§¨¨©©ª««¬¬
®
®
¯
¯°°±
,
,




Q
Q
R
R
S
S
TT
T
UU
U
V
V
WWXXYY
Z
ZZ[[\\
]
]
^
^
_
__``¢
¢
£
£
¤
¤
¥¥
¥
¦¦
¦
§
§
¨¨©©ªª
«
««¬¬
®
®
¯
¯
°
°°±±
,,

QQRRS
S
T
T
UUVVWWXYYZZ
[
[
\
\
]
]
^
^
_
_
`
`¢¢££¤
¤
¥
¥
¦¦§§¨¨©ªª««
¬
¬
®
®
¯
¯
°
°
±
±
Paper Phenol
Glass Epoxy
Glass Epoxy
Paper Phenol
Paper Phenol
Glass Epoxy
Continued from the preceding page.
Continued on the following page.
Reference Data
154
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
Reference Data
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
5. Break Strength
(1) Test Method
Place the chip on a steel plate as illustrated on the right.
Increase load applied to a point near the center of the
test sample.
(2) Test Samples
GRM21 5C/R7/F5 Characteristics
GRM31 5C/R7/F5 Characteristics
(3) Acceptance Criteria
Define the load that has caused the chip to break or
crack, as the bending force.
(4) Explanation
Break strength, P, is proportionate to the square of the
thickness of the ceramic element and is expressed as a
curve of secondary degree.
The formula is:
W : Width of ceramic element (mm)
T : Thickness of element (mm)
L : Distance between fulcrums (mm)
γ : Bending stress (N/mm2)
(5) Results
Chip Size
LW 5C
Charac-
teristics
R7
Charac-
teristics
γ
F5
Charac-
teristics
GRM21
2.7 1.5
1.5 1.2 300 180 160
GRM31
P= (N)
2γWT2
3L
W
T
L
(in mm)
GRM21 GRM31
6. Thermal Shock
(1) Test method
After applying flux (an ethanol solution of 25% rosin), dip
the chip in a solder bath (6Z4 eutectic solder) in
accordance with the following
conditions:
(2) Test samples
GRM21 5C/R7/F5 Characteristics T=0.6mm typical
(3) Acceptance criteria
Visually inspect the test sample with a 60-power optical
microscope. Chips exhibiting breaks or cracks should be
determined to be defective.
,
QRSTUWX
YZ
\
]^_`
¢£¤¥¦¨©
ª«
®¯°±
Storage
scope Amplifier
Load cell
Sample
Steel plate
P Pressurizing
speed: 2.5mm/sec. Loading Jig End
φ1.0mm
P0.5mm
0
20
40
60
80
100
120
140 R7 F5
0 0.4 0.8 1.2 1.6
Thickness of Ceramic Element (mm)
Bending-break Strength (N)
5C
F5
R7
5C
0
20
40
60
80
100
120
140
0 0.4 0.8 1.2 1.6
Thickness of Ceramic Element (mm)
Bending-break Strength (N)
\`±
UY¦ª
,
QRU
]^
¢£¦
®¯
,
Q
]
¢
®
Dipping Speed: 25mm/sec.
Chip Capacitor
Solder Bath
Solder
Temperature
Natural
Cooling
2 sec. Time
25D
T
Temperature
Continued from the preceding page.
Continued on the following page.
Reference Data
155
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
Reference Data
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
7. Solder Heat Resistance
(1) Test Method
q Reflow soldering:
Apply about 300 µm of solder paste over the alumina
substrate. After reflow soldering, remove the chip and
check for leaching that may have occurred on the
outer electrode.
w Flow soldering:
After dipping the test sample with a pair of tweezers in
wave solder (eutectic solder), check for leaching that
may have occurred on the outer electrode.
(2) Test samples
GRM21: For flow/reflow soldering T=0.6mm
(3) Acceptance criteria
The starting time of leaching should be defined as the
time when the outer electrode has lost 25% of the total
edge length of A-B-C-D as illustrated:
e Dip soldering:
After dipping the test sample with a pair of tweezers in
static solder (eutectic solder), check for leaching that
may have occurred on the outer electrode.
r Flux to be used: An ethanol solution of 25% rosin.
(4) Results
(4) Results
Reflow Soldering
Dip Soldering
Flow Soldering
0
20
40
60
80
100
200 240 280 320 360
Temperature Differential T (D)
Incidence of Cracks (%)
F5
R7
5C
A
B
C
D
Outer Electrode
280
270
260
250
240
230
220
2100
Leaching Starting Time (sec.)
280
270
260
250
240
230
220
2100 102030405060
280
270
260
250
240
230
220
2100 102030405060
60 120 180 240
Soldering Temperature (D)
Leaching Starting Time (sec.)
Soldering Temperature (D)
Leaching Starting Time (sec.)
Soldering Temperature (D)
Continued from the preceding page.
Continued on the following page.
Reference Data
156
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
Reference Data
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
8. Thermal Shock when Making Corrections with a
Soldering Iron
(1) Test Method
Apply a soldering iron meeting the conditions below to
the soldered joint of a chip that has been soldered to a
paper phenol board, while supplying wire solder. (Note:
the soldering iron tip should not directly touch the ceramic
element of the chip.)
(2) Test Samples
GRM21 5C/R7/F5 Characteristics T=0.6mm
(3) Acceptance Criteria for Defects
Observe the appearance of the test sample with a
60-power optical microscope. Those units displaying any
breaks or cracks are determined to be defective.
(4) Results
Soldering Iron Tip Diameter
Ceramic heater 20W ø3mm
GRM21 5C (T=0.6) GRM21 R7 (T=0.6)
GRM21 F5 (T=0.6)
Mounting Solder
Paper Phenol Substrate
Wire Solder Soldering lron
Duration of
Touching :
Approx. 3 sec.
100
200 Soldering Iron Tip Temperature (D)
80
60
40
20
0240 280 320 360
100
200
80
60
40
20
0240 280 320 360
100
200
80
60
40
20
0240 280 320 360
Incidence of Cracks (%)
Soldering Iron Tip Temperature (D)
Incidence of Cracks (%)
Soldering Iron Tip Temperature (D)
Incidence of Cracks (%)
Continued from the preceding page.
Reference Data
157
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General
GRM Series
Array
GNM Series
Low ESL
LLp Series
High-Q
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
Reference Data
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
For General Purpose GRM/GRJ Series
1-1 Low Dissipation Factor GRM Series 160
Specifications and Test Methods 164
1-2
High Capacitance for General Use GRM Series
166
Specifications and Test Methods 168
1-3 Soft Termination Type GRJ Series 171
Specifications and Test Methods 173
Only for Applications
2-1
For LCD Backlight Inverter Circuit GRM/DC3.15kV Series
176
Specifications and Test Methods 177
2-2 For Information Devices GR4 Series 179
Specifications and Test Methods 180
2-3 For Camera Flash Circuit GR7 Series 183
Specifications and Test Methods 184
AC250V Type (Which Meet Japanese Law) GA2 Series
187
Specifications and Test Methods 188
Safety Standard Certified GA3 Series
4-1 UL, IEC60384-14 Class X1/Y2 Type GC 191
4-2 IEC60384-14 Class Y2, X1/Y2 Type GF 192
4-3 IEC60384-14 Class Y3 Type GD 194
4-4 IEC60384-14 Class X2 Type GB 195
Specifications and Test Methods 196
Reference Data (Typical Example) 200
Package 203
!Caution 206
Notice 214
Chip Monolithic Ceramic Capacitors (Medium Voltage)
1
2
3
4
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General Purpose
GRM/GRJ Series
Only for ApplicationsAC250V Type
GA2 Series
Safety Standard
Certified GA3 Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
For General Purpose
GRM/GRJ Series
Only for ApplicationsAC250V Type
GA2 Series
Safety Standard
Certified GA3 Series
Product Information
160
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Chip Monolithic Ceramic Capacitors (Medium Voltage)
Low Dissipation Factor GRM Series
Features
1. Low-loss and suitable for high frequency circuits
2. Murata's original internal electrode structure
provides high flash-over voltage.
3. A new monolithic structure for small, surface-
mountable devices capable of operating at high
voltage levels
4. Sn-plated external electrodes provides good
solderability.
5. Use the GRM21/31 type with flow or reflow soldering,
and other types with reflow soldering only.
Applications
Ideal for use on high frequency pulse circuits such
as snubber circuits for switching power supplies,
DC-DC converters, ballasts (inverter fluorescent
lamps), etc.
Do not use these products in any Automotive
Power train or Safety equipment including Battery
chargers for Electric Vehicles and Plug-in Hybrids.
Only Murata products clearly stipulated as
"for Automotive use" can be used for automobile
applications such as Power train and Safety equipment.
Part Number LW T
Dimensions (mm) e min. g min.
1.5*
0.7
1.6 ±0.2
2.5 ±0.2
2.0 ±0.2
0.3
2.9
GRM32A
GRM32B
GRM42A
GRM31B
GRM31A
GRM21B
GRM21A
3.2 ±0.2
1.25 ±0.22.0 ±0.2
3.2 ±0.2
4.5 ±0.3
* GRM31A7U3D, GRM32A7U3D, GRM32B7U3D: 1.8mm min.
L
T
W
e eg
1.0 +0,-0.3
1.25 ±0.2
1.0 +0,-0.3
1.0 +0,-0.3
1.0 +0,-0.3
1.25 +0,-0.3
1.25 +0,-0.3
C0G Characteristics
Part Number Rated Voltage
(V) TC Code
(Standard) Capacitance
(pF) Length L
(mm) Width W
(mm) Thickness T
(mm)
Electrode g
min.
(mm)
Electrode e
(mm)
GRM21A5C2E100JW01D DC250 C0G (EIA) 10 ±5% 2.0 1.25 1.0 0.7 0.3 min.
GRM21A5C2E120JW01D DC250 C0G (EIA) 12 ±5% 2.0 1.25 1.0 0.7 0.3 min.
GRM21A5C2E150JW01D DC250 C0G (EIA) 15 ±5% 2.0 1.25 1.0 0.7 0.3 min.
GRM21A5C2E180JW01D DC250 C0G (EIA) 18 ±5% 2.0 1.25 1.0 0.7 0.3 min.
GRM21A5C2E220JW01D DC250 C0G (EIA) 22 ±5% 2.0 1.25 1.0 0.7 0.3 min.
GRM21A5C2E270JW01D DC250 C0G (EIA) 27 ±5% 2.0 1.25 1.0 0.7 0.3 min.
GRM21A5C2E330JW01D DC250 C0G (EIA) 33 ±5% 2.0 1.25 1.0 0.7 0.3 min.
GRM21A5C2E390JW01D DC250 C0G (EIA) 39 ±5% 2.0 1.25 1.0 0.7 0.3 min.
GRM21A5C2E470JW01D DC250 C0G (EIA) 47 ±5% 2.0 1.25 1.0 0.7 0.3 min.
GRM21A5C2E560JW01D DC250 C0G (EIA) 56 ±5% 2.0 1.25 1.0 0.7 0.3 min.
GRM21A5C2E680JW01D DC250 C0G (EIA) 68 ±5% 2.0 1.25 1.0 0.7 0.3 min.
GRM21A5C2E820JW01D DC250 C0G (EIA) 82 ±5% 2.0 1.25 1.0 0.7 0.3 min.
GRM21A5C2E101JW01D DC250 C0G (EIA) 100 ±5% 2.0 1.25 1.0 0.7 0.3 min.
GRM31A5C2J100JW01D DC630 C0G (EIA) 10 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A5C2J120JW01D DC630 C0G (EIA) 12 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A5C2J150JW01D DC630 C0G (EIA) 15 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A5C2J180JW01D DC630 C0G (EIA) 18 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A5C2J220JW01D DC630 C0G (EIA) 22 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A5C2J270JW01D DC630 C0G (EIA) 27 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A5C2J330JW01D DC630 C0G (EIA) 33 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A5C2J390JW01D DC630 C0G (EIA) 39 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A5C2J470JW01D DC630 C0G (EIA) 47 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A5C2J560JW01D DC630 C0G (EIA) 56 ±5% 3.2 1.6 1.0 1.5 0.3 min.
Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
For General Purpose
GRM/GRJ Series
Only for ApplicationsAC250V Type
GA2 Series
Safety Standard
Certified GA3 Series
Product Information
161
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Part Number Rated Voltage
(V) TC Code
(Standard) Capacitance
(pF) Length L
(mm) Width W
(mm) Thickness T
(mm)
Electrode g
min.
(mm)
Electrode e
(mm)
Continued from the preceding page.
GRM31A5C2J680JW01D DC630 C0G (EIA) 68 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A5C2J820JW01D DC630 C0G (EIA) 82 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A5C2J101JW01D DC630 C0G (EIA) 100 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A5C2J121JW01D DC630 C0G (EIA) 120 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A5C2J151JW01D DC630 C0G (EIA) 150 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A5C2J181JW01D DC630 C0G (EIA) 180 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A5C2J221JW01D DC630 C0G (EIA) 220 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A5C2J271JW01D DC630 C0G (EIA) 270 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A5C2J331JW01D DC630 C0G (EIA) 330 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A5C2J391JW01D DC630 C0G (EIA) 390 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A5C2J471JW01D DC630 C0G (EIA) 470 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A5C2J561JW01D DC630 C0G (EIA) 560 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31B5C2J681JW01L DC630 C0G (EIA) 680 ±5% 3.2 1.6 1.25 1.5 0.3 min.
GRM31B5C2J821JW01L DC630 C0G (EIA) 820 ±5% 3.2 1.6 1.25 1.5 0.3 min.
GRM31B5C2J102JW01L DC630 C0G (EIA) 1000 ±5% 3.2 1.6 1.25 1.5 0.3 min.
GRM31A5C3A100JW01D DC1000 C0G (EIA) 10 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A5C3A120JW01D DC1000 C0G (EIA) 12 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A5C3A150JW01D DC1000 C0G (EIA) 15 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A5C3A180JW01D DC1000 C0G (EIA) 18 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A5C3A220JW01D DC1000 C0G (EIA) 22 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A5C3A270JW01D DC1000 C0G (EIA) 27 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A5C3A330JW01D DC1000 C0G (EIA) 33 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A5C3A390JW01D DC1000 C0G (EIA) 39 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A5C3A470JW01D DC1000 C0G (EIA) 47 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A5C3A560JW01D DC1000 C0G (EIA) 56 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A5C3A680JW01D DC1000 C0G (EIA) 68 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A5C3A820JW01D DC1000 C0G (EIA) 82 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A5C3A101JW01D DC1000 C0G (EIA) 100 ±5% 3.2 1.6 1.0 1.5 0.3 min.
U2J Characteristics
Part Number Rated Voltage
(V) TC Code
(Standard) Capacitance
(pF) Length L
(mm) Width W
(mm) Thickness T
(mm)
Electrode g
min.
(mm)
Electrode e
(mm)
GRM21A7U2E101JW31D DC250 U2J (EIA) 100 ±5% 2.0 1.25 1.0 0.7 0.3 min.
GRM21A7U2E121JW31D DC250 U2J (EIA) 120 ±5% 2.0 1.25 1.0 0.7 0.3 min.
GRM21A7U2E151JW31D DC250 U2J (EIA) 150 ±5% 2.0 1.25 1.0 0.7 0.3 min.
GRM21A7U2E181JW31D DC250 U2J (EIA) 180 ±5% 2.0 1.25 1.0 0.7 0.3 min.
GRM21A7U2E221JW31D DC250 U2J (EIA) 220 ±5% 2.0 1.25 1.0 0.7 0.3 min.
GRM21A7U2E271JW31D DC250 U2J (EIA) 270 ±5% 2.0 1.25 1.0 0.7 0.3 min.
GRM21A7U2E331JW31D DC250 U2J (EIA) 330 ±5% 2.0 1.25 1.0 0.7 0.3 min.
GRM21A7U2E391JW31D DC250 U2J (EIA) 390 ±5% 2.0 1.25 1.0 0.7 0.3 min.
GRM21A7U2E471JW31D DC250 U2J (EIA) 470 ±5% 2.0 1.25 1.0 0.7 0.3 min.
GRM21A7U2E561JW31D DC250 U2J (EIA) 560 ±5% 2.0 1.25 1.0 0.7 0.3 min.
GRM21A7U2E681JW31D DC250 U2J (EIA) 680 ±5% 2.0 1.25 1.0 0.7 0.3 min.
GRM21A7U2E821JW31D DC250 U2J (EIA) 820 ±5% 2.0 1.25 1.0 0.7 0.3 min.
GRM21A7U2E102JW31D DC250 U2J (EIA) 1000 ±5% 2.0 1.25 1.0 0.7 0.3 min.
GRM21A7U2E122JW31D DC250 U2J (EIA) 1200 ±5% 2.0 1.25 1.0 0.7 0.3 min.
GRM21A7U2E152JW31D DC250 U2J (EIA) 1500 ±5% 2.0 1.25 1.0 0.7 0.3 min.
GRM21A7U2E182JW31D DC250 U2J (EIA) 1800 ±5% 2.0 1.25 1.0 0.7 0.3 min.
GRM21A7U2E222JW31D DC250 U2J (EIA) 2200 ±5% 2.0 1.25 1.0 0.7 0.3 min.
GRM21B7U2E272JW32L DC250 U2J (EIA) 2700 ±5% 2.0 1.25 1.25 0.7 0.3 min.
GRM31A7U2E272JW31D DC250 U2J (EIA) 2700 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM21B7U2E332JW32L DC250 U2J (EIA) 3300 ±5% 2.0 1.25 1.25 0.7 0.3 min.
GRM31A7U2E332JW31D DC250 U2J (EIA) 3300 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM21B7U2E392JW32L DC250 U2J (EIA) 3900 ±5% 2.0 1.25 1.25 0.7 0.3 min.
GRM31A7U2E392JW31D DC250 U2J (EIA) 3900 ±5% 3.2 1.6 1.0 1.5 0.3 min.
Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
For General Purpose
GRM/GRJ Series
Only for ApplicationsAC250V Type
GA2 Series
Safety Standard
Certified GA3 Series
Product Information
162
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Part Number Rated Voltage
(V) TC Code
(Standard) Capacitance
(pF) Length L
(mm) Width W
(mm) Thickness T
(mm)
Electrode g
min.
(mm)
Electrode e
(mm)
Continued from the preceding page.
GRM21B7U2E472JW32L DC250 U2J (EIA) 4700 ±5% 2.0 1.25 1.25 0.7 0.3 min.
GRM31A7U2E472JW31D DC250 U2J (EIA) 4700 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM21B7U2E562JW32L DC250 U2J (EIA) 5600 ±5% 2.0 1.25 1.25 0.7 0.3 min.
GRM31A7U2E562JW31D DC250 U2J (EIA) 5600 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31B7U2E682JW31L DC250 U2J (EIA) 6800 ±5% 3.2 1.6 1.25 1.5 0.3 min.
GRM31B7U2E822JW31L DC250 U2J (EIA) 8200 ±5% 3.2 1.6 1.25 1.5 0.3 min.
GRM31B7U2E103JW31L DC250 U2J (EIA) 10000 ±5% 3.2 1.6 1.25 1.5 0.3 min.
GRM31A7U2J100JW31D DC630 U2J (EIA) 10 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A7U2J120JW31D DC630 U2J (EIA) 12 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A7U2J150JW31D DC630 U2J (EIA) 15 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A7U2J180JW31D DC630 U2J (EIA) 18 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A7U2J220JW31D DC630 U2J (EIA) 22 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A7U2J270JW31D DC630 U2J (EIA) 27 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A7U2J330JW31D DC630 U2J (EIA) 33 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A7U2J390JW31D DC630 U2J (EIA) 39 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A7U2J470JW31D DC630 U2J (EIA) 47 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A7U2J560JW31D DC630 U2J (EIA) 56 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A7U2J680JW31D DC630 U2J (EIA) 68 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A7U2J820JW31D DC630 U2J (EIA) 82 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A7U2J101JW31D DC630 U2J (EIA) 100 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A7U2J121JW31D DC630 U2J (EIA) 120 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A7U2J151JW31D DC630 U2J (EIA) 150 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A7U2J181JW31D DC630 U2J (EIA) 180 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A7U2J221JW31D DC630 U2J (EIA) 220 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A7U2J271JW31D DC630 U2J (EIA) 270 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A7U2J331JW31D DC630 U2J (EIA) 330 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A7U2J391JW31D DC630 U2J (EIA) 390 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A7U2J471JW31D DC630 U2J (EIA) 470 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A7U2J561JW31D DC630 U2J (EIA) 560 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A7U2J681JW31D DC630 U2J (EIA) 680 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A7U2J821JW31D DC630 U2J (EIA) 820 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A7U2J102JW31D DC630 U2J (EIA) 1000 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM32A7U2J122JW31D DC630 U2J (EIA) 1200 ±5% 3.2 2.5 1.0 1.5 0.3 min.
GRM32A7U2J152JW31D DC630 U2J (EIA) 1500 ±5% 3.2 2.5 1.0 1.5 0.3 min.
GRM32A7U2J182JW31D DC630 U2J (EIA) 1800 ±5% 3.2 2.5 1.0 1.5 0.3 min.
GRM32A7U2J222JW31D DC630 U2J (EIA) 2200 ±5% 3.2 2.5 1.0 1.5 0.3 min.
GRM31A7U3A100JW31D DC1000 U2J (EIA) 10 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A7U3A120JW31D DC1000 U2J (EIA) 12 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A7U3A150JW31D DC1000 U2J (EIA) 15 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A7U3A180JW31D DC1000 U2J (EIA) 18 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A7U3A220JW31D DC1000 U2J (EIA) 22 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A7U3A270JW31D DC1000 U2J (EIA) 27 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A7U3A330JW31D DC1000 U2J (EIA) 33 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A7U3A390JW31D DC1000 U2J (EIA) 39 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A7U3A470JW31D DC1000 U2J (EIA) 47 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A7U3A560JW31D DC1000 U2J (EIA) 56 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A7U3A680JW31D DC1000 U2J (EIA) 68 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A7U3A820JW31D DC1000 U2J (EIA) 82 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A7U3A101JW31D DC1000 U2J (EIA) 100 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A7U3A121JW31D DC1000 U2J (EIA) 120 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A7U3A151JW31D DC1000 U2J (EIA) 150 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A7U3A181JW31D DC1000 U2J (EIA) 180 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A7U3A221JW31D DC1000 U2J (EIA) 220 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A7U3A271JW31D DC1000 U2J (EIA) 270 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31A7U3A331JW31D DC1000 U2J (EIA) 330 ±5% 3.2 1.6 1.0 1.5 0.3 min.
GRM31B7U3A391JW31L DC1000 U2J (EIA) 390 ±5% 3.2 1.6 1.25 1.5 0.3 min.
GRM31B7U3A471JW31L DC1000 U2J (EIA) 470 ±5% 3.2 1.6 1.25 1.5 0.3 min.
Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
For General Purpose
GRM/GRJ Series
Only for ApplicationsAC250V Type
GA2 Series
Safety Standard
Certified GA3 Series
Product Information
163
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Part Number Rated Voltage
(V) TC Code
(Standard) Capacitance
(pF) Length L
(mm) Width W
(mm) Thickness T
(mm)
Electrode g
min.
(mm)
Electrode e
(mm)
Continued from the preceding page.
GRM31A7U3D100JW31D DC2000 U2J (EIA) 10 ±5% 3.2 1.6 1.0 1.8 0.3 min.
GRM31A7U3D120JW31D DC2000 U2J (EIA) 12 ±5% 3.2 1.6 1.0 1.8 0.3 min.
GRM31A7U3D150JW31D DC2000 U2J (EIA) 15 ±5% 3.2 1.6 1.0 1.8 0.3 min.
GRM31A7U3D180JW31D DC2000 U2J (EIA) 18 ±5% 3.2 1.6 1.0 1.8 0.3 min.
GRM31A7U3D220JW31D DC2000 U2J (EIA) 22 ±5% 3.2 1.6 1.0 1.8 0.3 min.
GRM31A7U3D270JW31D DC2000 U2J (EIA) 27 ±5% 3.2 1.6 1.0 1.8 0.3 min.
GRM31A7U3D330JW31D DC2000 U2J (EIA) 33 ±5% 3.2 1.6 1.0 1.8 0.3 min.
GRM31A7U3D390JW31D DC2000 U2J (EIA) 39 ±5% 3.2 1.6 1.0 1.8 0.3 min.
GRM31A7U3D470JW31D DC2000 U2J (EIA) 47 ±5% 3.2 1.6 1.0 1.8 0.3 min.
GRM31A7U3D560JW31D DC2000 U2J (EIA) 56 ±5% 3.2 1.6 1.0 1.8 0.3 min.
GRM31A7U3D680JW31D DC2000 U2J (EIA) 68 ±5% 3.2 1.6 1.0 1.8 0.3 min.
GRM32A7U3D820JW31D DC2000 U2J (EIA) 82 ±5% 3.2 2.5 1.0 1.8 0.3 min.
GRM32A7U3D101JW31D DC2000 U2J (EIA) 100 ±5% 3.2 2.5 1.0 1.8 0.3 min.
GRM32A7U3D121JW31D DC2000 U2J (EIA) 120 ±5% 3.2 2.5 1.0 1.8 0.3 min.
GRM32A7U3D151JW31D DC2000 U2J (EIA) 150 ±5% 3.2 2.5 1.0 1.8 0.3 min.
GRM32B7U3D181JW31L DC2000 U2J (EIA) 180 ±5% 3.2 2.5 1.25 1.8 0.3 min.
GRM32B7U3D221JW31L DC2000 U2J (EIA) 220 ±5% 3.2 2.5 1.25 1.8 0.3 min.
GRM42A7U3F270JW31L DC3150 U2J (EIA) 27 ±5% 4.5 2.0 1.0 2.9 0.3 min.
GRM42A7U3F330JW31L DC3150 U2J (EIA) 33 ±5% 4.5 2.0 1.0 2.9 0.3 min.
GRM42A7U3F390JW31L DC3150 U2J (EIA) 39 ±5% 4.5 2.0 1.0 2.9 0.3 min.
GRM42A7U3F470JW31L DC3150 U2J (EIA) 47 ±5% 4.5 2.0 1.0 2.9 0.3 min.
GRM42A7U3F560JW31L DC3150 U2J (EIA) 56 ±5% 4.5 2.0 1.0 2.9 0.3 min.
GRM42A7U3F680JW31L DC3150 U2J (EIA) 68 ±5% 4.5 2.0 1.0 2.9 0.3 min.
GRM42A7U3F820JW31L DC3150 U2J (EIA) 82 ±5% 4.5 2.0 1.0 2.9 0.3 min.
GRM42A7U3F101JW31L DC3150 U2J (EIA) 100 ±5% 4.5 2.0 1.0 2.9 0.3 min.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Medium Voltage Low Dissipation Factor Specifications and Test Methods
Continued on the following page.
Solder the capacitor to the test jig (glass epoxy board).
The capacitor should be subjected to a simple harmonic motion
having a total amplitude of 1.5mm, the frequency being varied
uniformly between the approximate limits of 10 and 55Hz. The
frequency range, from 10 to 55Hz and return to 10Hz, should be
traversed in approximately 1 min. This motion should be applied
for a period of 2 hrs. in each of 3 mutually perpendicular
directions (total of 6 hrs.).10
Vibration
Resistance
Appearance
No defects or abnormalities
Capacitance
Within the specified tolerance
Q1,000 min.
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 1.
Then apply 10N force in the direction of the arrow.
The soldering should be done using the reflow method and
should be conducted with care so that the soldering is uniform
and free of defects such as heat shock.
Fig. 1
9Adhesive Strength
of Termination No removal of the terminations or other defect should occur.
The capacitance measurement should be made at each step
specified in the Table.
8Capacitance
Temperature
Characteristics
Temp. Coefficient
C0G char. :
0T30ppm/D (Temp. Range : W25 to W125D)
0W30, Y72ppm/D (Temp. Range : Y55 to W25D)
U2J char. :
Y750T120ppm/D (Temp. Range : W25 to W125D)
Y750W120, Y347ppm/D (Temp. Range : Y55 to W25D)
7Q 1,000 min.
The capacitance/Q should be measured at the frequency and
voltage shown as follows.
6 Capacitance Within the specified tolerance
The insulation resistance should be measured with DC500T50V
(DC250T25V in case of rated voltage: DC250V) and within 60T5
sec. of charging.
5
Insulation Resistance
(I.R.)
More than 10,000M
No failure should be observed when voltage in the Table is
applied between the terminations for 1 to 5 sec., provided the
charge/discharge current is less than 50mA.
4 Dielectric Strength No defects or abnormalities
Using calipers and micrometers3 Dimensions Within the specified dimension
Visual inspection2 Appearance No defects or abnormalities
Y1
Operating
Temperature Range
Y55 to W125D
No. Test MethodSpecificationsItem
Rated Voltage Test Voltage
200% of the rated voltage
150% of the rated voltage
130% of the rated voltage
DC250V
DC630V
DC1kV, DC2kV,
DC3.15kV
Capacitance Frequency
1T0.2MHz
1T0.2kHz
Voltage
AC0.5 to 5V(r.m.s.)
AC1T0.2V(r.m.s.)
CF1,000pF
CU1,000pF
Step Temperature (D)
25T2
Min. Operating Temp.T3
25T2
Max. Operating Temp.T2
25T2
1
2
3
4
5
10N, 10T1s
Glass Epoxy Board
Solder resist
Cu
Glass Epoxy Board
GRM Series Specifications and Test Methods
164
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General Purpose
GRM/GRJ Series
Only for ApplicationsAC250V Type
GA2 Series
Safety Standard
Certified GA3 Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Medium Voltage Low Dissipation Factor Specifications and Test Methods
Continued from the preceding page.
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Apply voltage as in Table for 1,000
W48
Y 0
hrs. at maximum
operating temperature T3D.
Remove and let sit for 24T2 hrs. at room condition,* then
measure.
The charge/discharge current is less than 50mA.
16 Life
Appearance
No marking defects
Capacitance
Change
Within T3.0%
Q350 min.
I.R. More than 1,000M
Dielectric
Strength
In accordance with item No.4
Let the capacitor sit at 40T2D and relative humidity of 90 to 95%
for 500
W24
Y 0
hrs.
Remove and let sit for 24T2 hrs. at room condition,* then
measure.
15
Humidity
(Steady
State)
Appearance
No marking defects
Capacitance
Change
Within T5.0%
Q350 min.
I.R. More than 1,000M
Dielectric
Strength
In accordance with item No.4
Fix the capacitor to the supporting jig (glass epoxy board) shown
in Fig. 4.
Perform the 5 cycles according to the 4 heat treatments listed in
the following table.
Let sit for 24T2 hrs. at room condition,* then measure.
Fig. 4
14
Temperature
Cycle
Appearance
No marking defects
Capacitance
Change
Within T2.5%
Q500 min.
I.R. More than 10,000M
Dielectric
Strength
In accordance with item No.4
Preheat the capacitor at 120 to 150D* for 1 min.
Immerse the capacitor in solder solution at 260T5D for 10T1 sec.
Let sit at room condition* for 24T2 hrs., then measure.
#Immersing speed: 25T2.5mm/s
*Preheating for more than 3.2Z2.5mm
13
Resistance
to Soldering
Heat
Appearance
No marking defects
Capacitance
Change
Within T2.5%
Q1,000 min.
I.R. More than 10,000M
Dielectric
Strength
In accordance with item No.4
Immerse the capacitor in a solution of ethanol (JIS-K-8101) and
rosin (JIS-K-5902) (25% rosin in weight proportion). Immerse in
solder solution for 2T0.5 sec.
Immersing speed: 25T2.5mm/s
Temp. of solder: 245T5°C Lead Free Solder (Sn-3.0Ag-0.5Cu)
235T5°C H60A or H63A Eutectic Solder
12 Solderability of
Termination 75% of the terminations are to be soldered evenly
and continuously.
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 2.
Then apply a force in the direction shown in Fig. 3.
The soldering should be done using the reflow method and
should be conducted with care so that the soldering is uniform
and free of defects such as heat shock.
Fig. 3
11 Deflection
No marking defects
Fig. 2
No. Test MethodSpecificationsItem
LZW
(mm) a Dimension (mm)
1.2
2.2
2.2
3.5
b
4.0
5.0
5.0
7.0
c
1.65
2.0
2.9
2.4
d
1.0
2.0Z1.25
3.2Z1.6
3.2Z2.5
4.5Z2.0
Step Temperature
100 to 120D
170 to 200D
Time
1 min.
1 min.
1
2
Step Temperature (D)
Min. Operating Temp.T3
Room Temp.
Max. Operating Temp.T2
Room Temp.
Time (min.)
30T3
2 to 3
30T3
2 to 3
1
2
3
4
Rated Voltage Applied Voltage
150% of the rated voltage
120% of the rated voltage
DC250V
DC630V, DC1kV,
DC2kV, DC3.15kV
Capacitance meter
Flexure=1
(in mm)
20 50
R230
45 45
Pressurizing
speed: 1.0mm/s
Pressurize
Solder resist
Cu
Glass Epoxy Board
TUX¥¦©
,QU¢¦
b
RSTVWX[
_
£¤¥§¨©¬
°
,

QT
UYZ\]^_`
¢¥
¦ª«®¯°±
ST
_
¤¥
°
_`°±
a
ST¤¥
ST¤¥
c
,QRV¢£§
UXY¦©ª
100
UY¦ª
Z^«¯
40
φ4.5
t : 1.6
d
GRM Series Specifications and Test Methods
165
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General Purpose
GRM/GRJ Series
Only for ApplicationsAC250V Type
GA2 Series
Safety Standard
Certified GA3 Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
166
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Chip Monolithic Ceramic Capacitors (Medium Voltage)
High Capacitance for General Use GRM Series
Features
1. A new monolithic structure for small, high
capacitance capable of operating at high voltage
levels.
2. Sn-plated external electrodes provide good
solderability.
3. Use the GRM18/21/31 types with flow or reflow
soldering, and other types with reflow soldering
only.
Applications
1. Ideal for use on diode-snubber circuits for
switching power supplies.
2. Ideal for use as primary-secondary coupling for
DC-DC converters.
3. Ideal for use on line filters and ringer detectors
for telephones, facsimiles and modems.
Do not use these products in any Automotive
Power train or Safety equipment including Battery
chargers for Electric Vehicles and Plug-in Hybrids.
Only Murata products clearly stipulated as
"for Automotive use" can be used for automobile
applications such as Power train and Safety equipment.
L
T
W
e eg
Part Number LW T
Dimensions (mm) g min.
2.0 ±0.2
3.2 ±0.2
1.25 ±0.2
1.6 ±0.2
1.0 +0,-0.3
1.25 +0,-0.3 0.7
1.25 ±0.2
1.2
2.2
3.2
0.4
1.6 ±0.2
1.5 +0,-0.3
1.5 +0,-0.3
2.0 +0,-0.3
2.0 +0,-0.3
2.0 +0,-0.3
3.2 ±0.3 2.5 ±0.2
4.5 ±0.4 3.2 ±0.3
5.7 ±0.4 5.0 ±0.4
0.8 ±0.1
e
0.2 to 0.5
0.3 min.
1.6 ±0.1 0.8 ±0.1
GRM21A
GRM21B
GRM188
GRM31B
GRM31C
GRM32Q
GRM32D
GRM43Q
GRM43D
GRM55D
Part Number Rated Voltage
(V) TC Code
(Standard) Capacitance Length L
(mm) Width W
(mm) Thickness T
(mm)
Electrode g
min.
(mm)
Electrode e
(mm)
GRM188R72E221KW07D DC250 X7R (EIA) 220pF ±10% 1.6 0.8 0.8 0.4 0.2 to 0.5
GRM188R72E331KW07D DC250 X7R (EIA) 330pF ±10% 1.6 0.8 0.8 0.4 0.2 to 0.5
GRM188R72E471KW07D DC250 X7R (EIA) 470pF ±10% 1.6 0.8 0.8 0.4 0.2 to 0.5
GRM188R72E681KW07D DC250 X7R (EIA) 680pF ±10% 1.6 0.8 0.8 0.4 0.2 to 0.5
GRM188R72E102KW07D DC250 X7R (EIA) 1000pF ±10% 1.6 0.8 0.8 0.4 0.2 to 0.5
GRM21AR72E102KW01D DC250 X7R (EIA) 1000pF ±10% 2.0 1.25 1.0 0.7 0.3 min.
GRM188R72E152KW07D DC250 X7R (EIA) 1500pF ±10% 1.6 0.8 0.8 0.4 0.2 to 0.5
GRM21AR72E152KW01D DC250 X7R (EIA) 1500pF ±10% 2.0 1.25 1.0 0.7 0.3 min.
GRM188R72E222KW07D DC250 X7R (EIA) 2200pF ±10% 1.6 0.8 0.8 0.4 0.2 to 0.5
GRM21AR72E222KW01D DC250 X7R (EIA) 2200pF ±10% 2.0 1.25 1.0 0.7 0.3 min.
GRM21AR72E332KW01D DC250 X7R (EIA) 3300pF ±10% 2.0 1.25 1.0 0.7 0.3 min.
GRM21AR72E472KW01D DC250 X7R (EIA) 4700pF ±10% 2.0 1.25 1.0 0.7 0.3 min.
GRM21AR72E682KW01D DC250 X7R (EIA) 6800pF ±10% 2.0 1.25 1.0 0.7 0.3 min.
GRM21BR72E103KW03L DC250 X7R (EIA) 10000pF ±10% 2.0 1.25 1.25 0.7 0.3 min.
GRM31BR72E153KW01L DC250 X7R (EIA) 15000pF ±10% 3.2 1.6 1.25 1.2 0.3 min.
GRM31BR72E223KW01L DC250 X7R (EIA) 22000pF ±10% 3.2 1.6 1.25 1.2 0.3 min.
GRM31CR72E333KW03L DC250 X7R (EIA) 33000pF ±10% 3.2 1.6 1.6 1.2 0.3 min.
GRM31CR72E473KW03L DC250 X7R (EIA) 47000pF ±10% 3.2 1.6 1.6 1.2 0.3 min.
GRM31BR72E683KW01L DC250 X7R (EIA) 68000pF ±10% 3.2 1.6 1.25 1.2 0.3 min.
GRM32QR72E683KW01L DC250 X7R (EIA) 68000pF ±10% 3.2 2.5 1.5 1.2 0.3 min.
GRM31CR72E104KW03L DC250 X7R (EIA) 0.10µF ±10% 3.2 1.6 1.6 1.2 0.3 min.
GRM32DR72E104KW01L DC250 X7R (EIA) 0.10µF ±10% 3.2 2.5 2.0 1.2 0.3 min.
GRM32QR72E154KW01L DC250 X7R (EIA) 0.15µF ±10% 3.2 2.5 1.5 1.2 0.3 min.
GRM43QR72E154KW01L DC250 X7R (EIA) 0.15µF ±10% 4.5 3.2 1.5 2.2 0.3 min.
GRM32DR72E224KW01L DC250 X7R (EIA) 0.22µF ±10% 3.2 2.5 2.0 1.2 0.3 min.
Continued on the following page.
For General Purpose
GRM/GRJ Series
Only for ApplicationsAC250V Type
GA2 Series
Safety Standard
Certified GA3 Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
167
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Part Number Rated Voltage
(V) TC Code
(Standard) Capacitance Length L
(mm) Width W
(mm) Thickness T
(mm)
Electrode g
min.
(mm)
Electrode e
(mm)
Continued from the preceding page.
GRM43DR72E224KW01L DC250 X7R (EIA) 0.22µF ±10% 4.5 3.2 2.0 2.2 0.3 min.
GRM43DR72E334KW01L DC250 X7R (EIA) 0.33µF ±10% 4.5 3.2 2.0 2.2 0.3 min.
GRM55DR72E334KW01L DC250 X7R (EIA) 0.33µF ±10% 5.7 5.0 2.0 3.2 0.3 min.
GRM43DR72E474KW01L DC250 X7R (EIA) 0.47µF ±10% 4.5 3.2 2.0 2.2 0.3 min.
GRM55DR72E474KW01L DC250 X7R (EIA) 0.47µF ±10% 5.7 5.0 2.0 3.2 0.3 min.
GRM55DR72E105KW01L DC250 X7R (EIA) 1.0µF ±10% 5.7 5.0 2.0 3.2 0.3 min.
GRM31BR72J102KW01L DC630 X7R (EIA) 1000pF ±10% 3.2 1.6 1.25 1.2 0.3 min.
GRM31BR72J152KW01L DC630 X7R (EIA) 1500pF ±10% 3.2 1.6 1.25 1.2 0.3 min.
GRM31BR72J222KW01L DC630 X7R (EIA) 2200pF ±10% 3.2 1.6 1.25 1.2 0.3 min.
GRM31BR72J332KW01L DC630 X7R (EIA) 3300pF ±10% 3.2 1.6 1.25 1.2 0.3 min.
GRM31BR72J472KW01L DC630 X7R (EIA) 4700pF ±10% 3.2 1.6 1.25 1.2 0.3 min.
GRM31BR72J682KW01L DC630 X7R (EIA) 6800pF ±10% 3.2 1.6 1.25 1.2 0.3 min.
GRM31BR72J103KW01L DC630 X7R (EIA) 10000pF ±10% 3.2 1.6 1.25 1.2 0.3 min.
GRM31CR72J153KW03L DC630 X7R (EIA) 15000pF ±10% 3.2 1.6 1.6 1.2 0.3 min.
GRM32QR72J223KW01L DC630 X7R (EIA) 22000pF ±10% 3.2 2.5 1.5 1.2 0.3 min.
GRM32DR72J333KW01L DC630 X7R (EIA) 33000pF ±10% 3.2 2.5 2.0 1.2 0.3 min.
GRM32DR72J473KW01L DC630 X7R (EIA) 47000pF ±10% 3.2 2.5 2.0 1.2 0.3 min.
GRM43QR72J683KW01L DC630 X7R (EIA) 68000pF ±10% 4.5 3.2 1.5 2.2 0.3 min.
GRM43DR72J104KW01L DC630 X7R (EIA) 0.10µF ±10% 4.5 3.2 2.0 2.2 0.3 min.
GRM55DR72J154KW01L DC630 X7R (EIA) 0.15µF ±10% 5.7 5.0 2.0 3.2 0.3 min.
GRM55DR72J224KW01L DC630 X7R (EIA) 0.22µF ±10% 5.7 5.0 2.0 3.2 0.3 min.
GRM31BR73A471KW01L DC1000 X7R (EIA) 470pF ±10% 3.2 1.6 1.25 1.2 0.3 min.
GRM31BR73A102KW01L DC1000 X7R (EIA) 1000pF ±10% 3.2 1.6 1.25 1.2 0.3 min.
GRM31BR73A152KW01L DC1000 X7R (EIA) 1500pF ±10% 3.2 1.6 1.25 1.2 0.3 min.
GRM31BR73A222KW01L DC1000 X7R (EIA) 2200pF ±10% 3.2 1.6 1.25 1.2 0.3 min.
GRM31BR73A332KW01L DC1000 X7R (EIA) 3300pF ±10% 3.2 1.6 1.25 1.2 0.3 min.
GRM31BR73A472KW01L DC1000 X7R (EIA) 4700pF ±10% 3.2 1.6 1.25 1.2 0.3 min.
GRM32QR73A682KW01L DC1000 X7R (EIA) 6800pF ±10% 3.2 2.5 1.5 1.2 0.3 min.
GRM32QR73A103KW01L DC1000 X7R (EIA) 10000pF ±10% 3.2 2.5 1.5 1.2 0.3 min.
GRM32DR73A153KW01L DC1000 X7R (EIA) 15000pF ±10% 3.2 2.5 2.0 1.2 0.3 min.
GRM32DR73A223KW01L DC1000 X7R (EIA) 22000pF ±10% 3.2 2.5 2.0 1.2 0.3 min.
GRM43DR73A333KW01L DC1000 X7R (EIA) 33000pF ±10% 4.5 3.2 2.0 2.2 0.3 min.
GRM43DR73A473KW01L DC1000 X7R (EIA) 47000pF ±10% 4.5 3.2 2.0 2.2 0.3 min.
GRM55DR73A104KW01L DC1000 X7R (EIA) 0.10µF ±10% 5.7 5.0 2.0 3.2 0.3 min.
For General Purpose
GRM/GRJ Series
Only for ApplicationsAC250V Type
GA2 Series
Safety Standard
Certified GA3 Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Continued on the following page.
Step Temperature (°C)
25±2
Min. Operating Temp.±3
25±2
Max. Operating Temp.±2
25±2
1
2
3
4
5
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Solder the capacitor to the test jig (glass epoxy board).
The capacitor should be subjected to a simple harmonic motion
having a total amplitude of 1.5mm, the frequency being varied
uniformly between the approximate limits of 10 and 55Hz. The
frequency range, from 10 to 55Hz and return to 10Hz, should be
traversed in approximately 1 min. This motion should be applied
for a period of 2 hrs. in each of 3 mutually perpendicular
directions (total of 6 hrs.).10
Vibration
Resistance
Appearance
No defects or abnormalities
Capacitance
Within the specified tolerance
D.F. 0.025 max.
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 1.
Then apply 10N force in the direction of the arrow.
The soldering should be done using the reflow method and
should be conducted with care so that the soldering is uniform
and free of defects such as heat shock.
Fig. 1
9Adhesive Strength
of Termination No removal of the terminations or other defect should occur.
The capacitance measurement should be made at each step
specified in the Table.
•Pretreatment
Perform a heat treatment at 150
+0
–10
°C for 60±5 min. and then
let sit for 24±2 hrs. at room condition.*
8Capacitance
Temperature
Characteristics
Cap. Change
Within ±15%
(Temp. Range: –55 to +125°C)
7Dissipation
Factor (D.F.) 0.025 max. The capacitance/D.F. should be measured at a frequency of
1±0.2kHz and a voltage of AC1±0.2V(r.m.s.)
6 Capacitance Within the specified tolerance
The insulation resistance should be measured with DC500±50V
(DC250±25V in case of rated voltage: DC250V) and within 60±5
sec. of charging.
5
Insulation Resistance
(I.R.)
CU0.01µF: More than 100MµF
CF0.01µF: More than 10,000M
No failure should be observed when 150% of the rated voltage
(200% of the rated voltage in case of rated voltage: DC250V,
120% of the rated voltage in case of rated voltage: DC1kV) is
applied between the terminations for 1 to 5 sec., provided the
charge/discharge current is less than 50mA.
4 Dielectric Strength No defects or abnormalities
Using calipers and micrometers3 Dimensions Within the specified dimensions
Visual inspection2 Appearance No defects or abnormalities
1
Operating
Temperature Range
–55 to +125°C
No. Test MethodSpecificationsItem
Solder resist
Cu
Glass Epoxy Board
10N (5N : Size 1.6g0.8mm only), 10T1s
Glass Epoxy Board
Medium Voltage High Capacitance for General Use Specifications and Test Methods
GRM Series Specifications and Test Methods
168
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General Purpose
GRM/GRJ Series
Only for ApplicationsAC250V Type
GA2 Series
Safety Standard
Certified GA3 Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Continued from the preceding page.
Continued on the following page.
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Let the capacitor sit at 40±2°C and relative humidity of 90 to 95%
for 500
+24
–0
hrs.
Remove and let sit for 24±2 hrs. at room condition,* then
measure.
•Pretreatment
Perform a heat treatment at 150
+0
–10
°C for 60±5 min. and then
let sit for 24±2 hrs. at room condition.*
15
Humidity
(Steady
State)
Appearance
No marking defects
Capacitance
Change
Within ±15%
D.F. 0.05 max.
I.R. CU0.01µF: More than 10MµF
CF0.01µF: More than 1,000M
Dielectric
Strength
In accordance with item No.4
Fix the capacitor to the supporting jig (glass epoxy board) shown
in Fig. 4.
Perform the 5 cycles according to the 4 heat treatments listed in
the following table.
Let sit for 24±2 hrs. at room condition,* then measure.
•Pretreatment
Perform a heat treatment at 150
+0
–10
°C for 60±5 min. and then
let sit for 24±2 hrs. at room condition.*
Fig. 4
14
Temperature
Cycle
Appearance
No marking defects
Capacitance
Change
Within ±7.5%
D.F. 0.025 max.
I.R. CU0.01µF: More than 100MµF
CF0.01µF: More than 10,000M
Dielectric
Strength
In accordance with item No.4
Preheat the capacitor at 120 to 150°C* for 1 min.
Immerse the capacitor in solder solution at 260±5°C for 10±1
sec. Let sit at room condition* for 24±2 hrs., then measure.
•Immersing speed: 25±2.5mm/s
•Pretreatment
Perform a heat treatment at 150
+0
–10
°C for 60±5 min. and then
let sit for 24±2 hrs. at room condition.*
*Preheating for more than 3.2Z2.5mm
13
Resistance
to Soldering
Heat
Appearance
No marking defects
Capacitance
Change
Within ±10%
D.F. 0.025 max.
I.R. CU0.01µF: More than 100MµF
CF0.01µF: More than 10,000M
Dielectric
Strength
In accordance with item No.4
Immerse the capacitor in a solution of ethanol (JIS-K-8101) and
rosin (JIS-K-5902) (25% rosin in weight proportion).
Immerse in solder solution for 2±0.5 sec.
Immersing speed: 25±2.5mm/s
Temp. of solder: 245±5°C Lead Free Solder (Sn-3.0Ag-0.5Cu)
235±5°C H60A or H63A Eutectic Solder
12 Solderability of
Termination 75% of the terminations are to be soldered evenly and continuously.
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 2.
Then apply a force in the direction shown in Fig. 3.
The soldering should be done using the reflow method and
should be conducted with care so that the soldering is uniform
and free of defects such as heat shock.
(in mm)
Fig. 3
11 Deflection
No marking defects
Fig. 2
No. Test MethodSpecificationsItem
TUX¥¦©
,QU¢¦
b
RSTVWX[
_
£¤¥§¨©¬
°
,

QT
UYZ\]^_`
¢¥
¦ª«®¯°±
ST
_
¤¥
°
_`°±
a
ST¤¥
ST¤¥
c
,QRV¢£§
UXY¦©ª
100
UY¦ª
Z^«¯
40
φ4.5
t : 1.6
d
Capacitance meter
Flexure=1
20 50
R230
45 45
Pressurizing
speed: 1.0mm/s
Pressurize
LZW
(mm) Dimension (mm)
a
1.0
1.2
2.2
2.2
3.5
4.5
b
3.0
4.0
5.0
5.0
7.0
8.0
c
1.2
1.65
2.0
2.9
3.7
5.6
d
1.0
1.6Z0.8
2.0Z1.25
3.2Z1.6
3.2Z2.5
4.5Z3.2
5.7Z5.0
Step Temperature
100 to 120°C
170 to 200°C
Time
1 min.
1 min.
1
2
Step Temperature (°C)
Min. Operating Temp.±3
Room Temp.
Max. Operating Temp.±2
Room Temp.
Time (min.)
30±3
2 to 3
30±3
2 to 3
1
2
3
4
Solder resist
Cu
Glass Epoxy Board
Medium Voltage High Capacitance for General Use Specifications and Test Methods
GRM Series Specifications and Test Methods
169
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General Purpose
GRM/GRJ Series
Only for ApplicationsAC250V Type
GA2 Series
Safety Standard
Certified GA3 Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Continued from the preceding page.
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Apply the rated voltage at 40±2°C and relative humidity of 90 to
95% for 500
+24
–0
hrs.
Remove and let sit for 24±2 hrs. at room condition,* then
measure.
•Pretreatment
Apply test voltage for 60±5 min. at test temperature.
Remove and let sit for 24±2 hrs. at room condition.*
17
Humidity
Loading
(Application:
DC250V,
DC630V
item)
Appearance
No marking defects
Capacitance
Change
Within ±15%
D.F. 0.05 max.
I.R. CU0.01µF: More than 10MµF
CF0.01µF: More than 1,000M
Dielectric
Strength
In accordance with item No.4
Apply 120% of the rated voltage (150% of the rated voltage in
case of rated voltage: DC250V, 110% of the rated voltage in case
of rated voltage: DC1kV) for 1,000
+48
–0
hrs. at maximum
operating temperature ±3°C. Remove and let sit for 24±2hrs. at
room condition,* then measure.
The charge/discharge current is less than 50mA.
•Pretreatment
Apply test voltage for 60±5 min. at test temperature.
Remove and let sit for 24±2 hrs. at room condition.*
16 Life
Appearance
No marking defects
Capacitance
Change
Within ±15% (rated voltage: DC250V, DC630V)
Within ±20% (rated voltage: DC1kV)
D.F. 0.05 max.
I.R. CU0.01µF: More than 10MµF
CF0.01µF: More than 1,000M
Dielectric
Strength
In accordance with item No.4
No. Test MethodSpecificationsItem
Medium Voltage High Capacitance for General Use Specifications and Test Methods
GRM Series Specifications and Test Methods
170
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General Purpose
GRM/GRJ Series
Only for ApplicationsAC250V Type
GA2 Series
Safety Standard
Certified GA3 Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
171
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Chip Monolithic Ceramic Capacitors (Medium Voltage)
Soft Termination Type GRJ series
L
T
W
e eg
Part Number LW T
Dimensions (mm) g min.
3.2 ±0.2 1.6 ±0.2 1.25 +0,-0.3
1.2
2.2
3.2
1.6 ±0.2
1.5 +0,-0.3
1.5 +0,-0.3
2.0 +0,-0.3
2.0 +0,-0.3
2.0 +0,-0.3
3.2 ±0.3 2.5 ±0.2
4.5 ±0.4 3.2 ±0.3
5.7 ±0.4 5.0 ±0.4
e
0.3 min.
GRJ31B
GRJ31C
2.0 ±0.2 1.25 ±0.2 1.0 +0,-0.3 0.7
1.25 ±0.2
GRJ21A
GRJ21B
GRJ32Q
GRJ32D
GRJ43Q
GRJ43D
GRJ55D
Part Number Rated Voltage
(V) TC Code
(Standard) Capacitance Length L
(mm) Width W
(mm) Thickness T
(mm)
Electrode g
min.
(mm)
Electrode e
(mm)
GRJ21AR72E102KWJ1D DC250 X7R (EIA) 1000pF ±10% 2.0 1.25 1.0 0.7 0.3 min.
GRJ21AR72E152KWJ1D DC250 X7R (EIA) 1500pF ±10% 2.0 1.25 1.0 0.7 0.3 min.
GRJ21AR72E222KWJ1D DC250 X7R (EIA) 2200pF ±10% 2.0 1.25 1.0 0.7 0.3 min.
GRJ21AR72E332KWJ1D DC250 X7R (EIA) 3300pF ±10% 2.0 1.25 1.0 0.7 0.3 min.
GRJ21AR72E472KWJ1D DC250 X7R (EIA) 4700pF ±10% 2.0 1.25 1.0 0.7 0.3 min.
GRJ21AR72E682KWJ1D DC250 X7R (EIA) 6800pF ±10% 2.0 1.25 1.0 0.7 0.3 min.
GRJ21BR72E103KWJ3L DC250 X7R (EIA) 10000pF ±10% 2.0 1.25 1.25 0.7 0.3 min.
GRJ31BR72E153KWJ1L DC250 X7R (EIA) 15000pF ±10% 3.2 1.6 1.25 1.2 0.3 min.
GRJ31BR72E223KWJ1L DC250 X7R (EIA) 22000pF ±10% 3.2 1.6 1.25 1.2 0.3 min.
GRJ31CR72E333KWJ3L DC250 X7R (EIA) 33000pF ±10% 3.2 1.6 1.6 1.2 0.3 min.
GRJ31CR72E473KWJ3L DC250 X7R (EIA) 47000pF ±10% 3.2 1.6 1.6 1.2 0.3 min.
GRJ31BR72E683KWJ1L DC250 X7R (EIA) 68000pF ±10% 3.2 1.6 1.25 1.2 0.3 min.
GRJ32QR72E683KWJ1L DC250 X7R (EIA) 68000pF ±10% 3.2 2.5 1.5 1.2 0.3 min.
GRJ31CR72E104KWJ3L DC250 X7R (EIA) 0.10µF ±10% 3.2 1.6 1.6 1.2 0.3 min.
GRJ32DR72E104KWJ1L DC250 X7R (EIA) 0.10µF ±10% 3.2 2.5 2.0 1.2 0.3 min.
GRJ32QR72E154KWJ1L DC250 X7R (EIA) 0.15µF ±10% 3.2 2.5 1.5 1.2 0.3 min.
GRJ43QR72E154KWJ1L DC250 X7R (EIA) 0.15µF ±10% 4.5 3.2 1.5 2.2 0.3 min.
GRJ32DR72E224KWJ1L DC250 X7R (EIA) 0.22µF ±10% 3.2 2.5 2.0 1.2 0.3 min.
GRJ43DR72E224KWJ1L DC250 X7R (EIA) 0.22µF ±10% 4.5 3.2 2.0 2.2 0.3 min.
GRJ43DR72E334KWJ1L DC250 X7R (EIA) 0.33µF ±10% 4.5 3.2 2.0 2.2 0.3 min.
GRJ55DR72E334KWJ1L DC250 X7R (EIA) 0.33µF ±10% 5.7 5.0 2.0 3.2 0.3 min.
GRJ43DR72E474KWJ1L DC250 X7R (EIA) 0.47µF ±10% 4.5 3.2 2.0 2.2 0.3 min.
GRJ55DR72E474KWJ1L DC250 X7R (EIA) 0.47µF ±10% 5.7 5.0 2.0 3.2 0.3 min.
GRJ55DR72E105KWJ1L DC250 X7R (EIA) 1.0µF ±10% 5.7 5.0 2.0 3.2 0.3 min.
GRJ31BR72J102KWJ1L DC630 X7R (EIA) 1000pF ±10% 3.2 1.6 1.25 1.2 0.3 min.
GRJ31BR72J152KWJ1L DC630 X7R (EIA) 1500pF ±10% 3.2 1.6 1.25 1.2 0.3 min.
GRJ31BR72J222KWJ1L DC630 X7R (EIA) 2200pF ±10% 3.2 1.6 1.25 1.2 0.3 min.
Continued on the following page.
Features
1. Improves endurance against Board Bending Stress.
2. Reduces the board bending stress by the conductive
polymer termination.
3. Use the GRJ21/31 types with flow or reflow
soldering, and other types with reflow soldering
only.
Applications
1. Ideal for use on diode-snubber circuits for
switching power supplies.
2. Ideal for use as primary-secondary coupling for
DC-DC converters.
3. Ideal for use on line filters and ringer detectors
for telephones, facsimiles and modems.
Do not use these products in any Automotive
Power train or Safety equipment including Battery
chargers for Electric Vehicles and Plug-in Hybrids.
Only Murata products clearly stipulated as
"for Automotive use" can be used for automobile
applications such as Power train and Safety equipment.
For General Purpose
GRM/GRJ Series
Only for ApplicationsAC250V Type
GA2 Series
Safety Standard
Certified GA3 Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
172
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Part Number Rated Voltage
(V) TC Code
(Standard) Capacitance Length L
(mm) Width W
(mm) Thickness T
(mm)
Electrode g
min.
(mm)
Electrode e
(mm)
Continued from the preceding page.
GRJ31BR72J332KWJ1L DC630 X7R (EIA) 3300pF ±10% 3.2 1.6 1.25 1.2 0.3 min.
GRJ31BR72J472KWJ1L DC630 X7R (EIA) 4700pF ±10% 3.2 1.6 1.25 1.2 0.3 min.
GRJ31BR72J682KWJ1L DC630 X7R (EIA) 6800pF ±10% 3.2 1.6 1.25 1.2 0.3 min.
GRJ31BR72J103KWJ1L DC630 X7R (EIA) 10000pF ±10% 3.2 1.6 1.25 1.2 0.3 min.
GRJ31CR72J153KWJ3L DC630 X7R (EIA) 15000pF ±10% 3.2 1.6 1.6 1.2 0.3 min.
GRJ32QR72J223KWJ1L DC630 X7R (EIA) 22000pF ±10% 3.2 2.5 1.5 1.2 0.3 min.
GRJ32DR72J333KWJ1L DC630 X7R (EIA) 33000pF ±10% 3.2 2.5 2.0 1.2 0.3 min.
GRJ32DR72J473KWJ1L DC630 X7R (EIA) 47000pF ±10% 3.2 2.5 2.0 1.2 0.3 min.
GRJ43QR72J683KWJ1L DC630 X7R (EIA) 68000pF ±10% 4.5 3.2 1.5 2.2 0.3 min.
GRJ43DR72J104KWJ1L DC630 X7R (EIA) 0.10µF ±10% 4.5 3.2 2.0 2.2 0.3 min.
GRJ55DR72J154KWJ1L DC630 X7R (EIA) 0.15µF ±10% 5.7 5.0 2.0 3.2 0.3 min.
GRJ55DR72J224KWJ1L DC630 X7R (EIA) 0.22µF ±10% 5.7 5.0 2.0 3.2 0.3 min.
GRJ31BR73A471KWJ1L DC1000 X7R (EIA) 470pF ±10% 3.2 1.6 1.25 1.2 0.3 min.
GRJ31BR73A102KWJ1L DC1000 X7R (EIA) 1000pF ±10% 3.2 1.6 1.25 1.2 0.3 min.
GRJ31BR73A152KWJ1L DC1000 X7R (EIA) 1500pF ±10% 3.2 1.6 1.25 1.2 0.3 min.
GRJ31BR73A222KWJ1L DC1000 X7R (EIA) 2200pF ±10% 3.2 1.6 1.25 1.2 0.3 min.
GRJ31BR73A332KWJ1L DC1000 X7R (EIA) 3300pF ±10% 3.2 1.6 1.25 1.2 0.3 min.
GRJ31BR73A472KWJ1L DC1000 X7R (EIA) 4700pF ±10% 3.2 1.6 1.25 1.2 0.3 min.
GRJ32QR73A682KWJ1L DC1000 X7R (EIA) 6800pF ±10% 3.2 2.5 1.5 1.2 0.3 min.
GRJ32QR73A103KWJ1L DC1000 X7R (EIA) 10000pF ±10% 3.2 2.5 1.5 1.2 0.3 min.
GRJ32DR73A153KWJ1L DC1000 X7R (EIA) 15000pF ±10% 3.2 2.5 2.0 1.2 0.3 min.
GRJ32DR73A223KWJ1L DC1000 X7R (EIA) 22000pF ±10% 3.2 2.5 2.0 1.2 0.3 min.
GRJ43DR73A333KWJ1L DC1000 X7R (EIA) 33000pF ±10% 4.5 3.2 2.0 2.2 0.3 min.
GRJ43DR73A473KWJ1L DC1000 X7R (EIA) 47000pF ±10% 4.5 3.2 2.0 2.2 0.3 min.
GRJ55DR73A104KWJ1L DC1000 X7R (EIA) 0.10µF ±10% 5.7 5.0 2.0 3.2 0.3 min.
For General Purpose
GRM/GRJ Series
Only for ApplicationsAC250V Type
GA2 Series
Safety Standard
Certified GA3 Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Continued on the following page.
Step Temperature (°C)
25±2
Min. Operating Temp.±3
25±2
Max. Operating Temp.±2
25±2
1
2
3
4
5
Rated Voltage Test Voltage
200% of the rated voltage
150% of the rated voltage
120% of the rated voltage
DC250V
DC630V
DC1kV
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Solder the capacitor to the test jig (glass epoxy board).
The capacitor should be subjected to a simple harmonic motion
having a total amplitude of 1.5mm, the frequency being varied
uniformly between the approximate limits of 10 and 55Hz. The
frequency range, from 10 to 55Hz and return to 10Hz, should be
traversed in approximately 1 min. This motion should be applied
for a period of 2 hrs. in each of 3 mutually perpendicular
directions (total of 6 hrs.).10
Vibration
Resistance
Appearance
No defects or abnormalities
Capacitance
Within the specified tolerance
D.F. 0.025 max.
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 1.
Then apply 10N force in the direction of the arrow.
The soldering should be done using the reflow method and
should be conducted with care so that the soldering is uniform
and free of defects such as heat shock.
Fig. 1
9Adhesive Strength
of Termination No removal of the terminations or other defect should occur.
The capacitance measurement should be made at each step
specified in the Table.
•Pretreatment
Perform a heat treatment at 150
+0
–10
°C for 60±5 min. and then
let sit for 24±2 hrs. at room condition.*
8Capacitance
Temperature
Characteristics
Cap. Change
Within ±15%
(Temp. Range: –55 to +125°C)
7Dissipation
Factor (D.F.) 0.025 max. The capacitance/D.F. should be measured at a frequency of
1±0.2kHz and a voltage of AC1±0.2V(r.m.s.)
6 Capacitance Within the specified tolerance
The insulation resistance should be measured with DC500±50V
(DC250±25V in case of rated voltage: DC250V) and within 60±5
sec. of charging.
5
Insulation Resistance
(I.R.)
CU0.01µF: More than 100MµF
CF0.01µF: More than 10,000M
No failure should be observed when voltage in the Table is
applied between the terminations for 1 to 5 sec., provided the
charge/discharge current is less than 50mA.
4 Dielectric Strength No defects or abnormalities
Using calipers and micrometers3 Dimensions Within the specified dimensions
Visual inspection2 Appearance No defects or abnormalities
1
Operating
Temperature Range
–55 to +125°C
No. Test MethodSpecificationsItem
Solder resist
Cu
Glass Epoxy Board
10N, 10T1s
Glass Epoxy Board
Medium Voltage Soft Termination Type GRJ Series Specifications and Test Methods
GRJ Series Specifications and Test Methods
173
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General Purpose
GRM/GRJ Series
Only for ApplicationsAC250V Type
GA2 Series
Safety Standard
Certified GA3 Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Continued from the preceding page.
Continued on the following page.
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Let the capacitor sit at 40±2°C and relative humidity of 90 to 95%
for 500
+24
–0
hrs.
Remove and let sit for 24±2 hrs. at room condition,* then
measure.
•Pretreatment
Perform a heat treatment at 150
+0
–10
°C for 60±5 min. and then
let sit for 24±2 hrs. at room condition.*
15
Humidity
(Steady
State)
Appearance
No marking defects
Capacitance
Change
Within ±15%
D.F. 0.05 max.
I.R. CU0.01µF: More than 10MµF
CF0.01µF: More than 1,000M
Dielectric
Strength
In accordance with item No.4
Fix the capacitor to the supporting jig (glass epoxy board) shown
in Fig. 4.
Perform the 5 cycles according to the 4 heat treatments listed in
the following table.
Let sit for 24±2 hrs. at room condition,* then measure.
•Pretreatment
Perform a heat treatment at 150
+0
–10
°C for 60±5 min. and then
let sit for 24±2 hrs. at room condition.*
Fig. 4
14
Temperature
Cycle
Appearance
No marking defects
Capacitance
Change
Within ±7.5%
D.F. 0.025 max.
I.R. CU0.01µF: More than 100MµF
CF0.01µF: More than 10,000M
Dielectric
Strength
In accordance with item No.4
Preheat the capacitor at 120 to 150°C* for 1 min.
Immerse the capacitor in solder solution at 260±5°C for 10±1
sec. Let sit at room condition* for 24±2 hrs., then measure.
•Immersing speed: 25±2.5mm/s
•Pretreatment
Perform a heat treatment at 150
+0
–10
°C for 60±5 min. and then
let sit for 24±2 hrs. at room condition.*
*Preheating for more than 3.2Z2.5mm
13
Resistance
to Soldering
Heat
Appearance
No marking defects
Capacitance
Change
Within ±10%
D.F. 0.025 max.
I.R. CU0.01µF: More than 100MµF
CF0.01µF: More than 10,000M
Dielectric
Strength
In accordance with item No.4
Immerse the capacitor in a solution of ethanol (JIS-K-8101) and
rosin (JIS-K-5902) (25% rosin in weight proportion).
Immerse in solder solution for 2±0.5 sec.
Immersing speed: 25±2.5mm/s
Temp. of solder: 245±5°C Lead Free Solder (Sn-3.0Ag-0.5Cu)
235±5°C H60A or H63A Eutectic Solder
12 Solderability of
Termination 75% of the terminations are to be soldered evenly and continuously.
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 2.
Then apply a force in the direction shown in Fig. 3.
The soldering should be done using the reflow method and
should be conducted with care so that the soldering is uniform
and free of defects such as heat shock.
(in mm)
Fig. 3
11 Deflection
No marking defects
Within ±12.5%
Fig. 2
Appearance
Capacitance
Change
No. Test MethodSpecificationsItem
STX¤¥©
T¥
b
,
QRSTUVW
Z
Z
]^_
¢£¤¥¦§¨
«
«
®¯°

T
WXYZ[\]_`
¥
¨©ª«¬®°±
Z^_«¯°
Z[_«¬°
a
^_¯°
_°
c
,QT¢¥
SWX¤¨©
100
TWX¥¨©
YZ]ª«®
40
φ4.5
t : 1.6
d
Capacitance meter
Flexure=3
20 50
R230
45 45
Pressurizing
speed: 1.0mm/s
Pressurize
LZW
(mm) Dimension (mm)
a
1.2
2.2
2.2
3.5
4.5
b
4.0
5.0
5.0
7.0
8.0
c
1.65
2.0
2.9
3.7
5.6
d
1.0
2.0Z1.25
3.2Z1.6
3.2Z2.5
4.5Z3.2
5.7Z5.0
Step Temperature
100 to 120°C
170 to 200°C
Time
1 min.
1 min.
1
2
Step Temperature (°C)
Min. Operating Temp.±3
Room Temp.
Max. Operating Temp.±2
Room Temp.
Time (min.)
30±3
2 to 3
30±3
2 to 3
1
2
3
4
Solder resist
Cu
Glass Epoxy Board
Medium Voltage Soft Termination Type GRJ Series Specifications and Test Methods
GRJ Series Specifications and Test Methods
174
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General Purpose
GRM/GRJ Series
Only for ApplicationsAC250V Type
GA2 Series
Safety Standard
Certified GA3 Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Continued from the preceding page.
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Apply the rated voltage at 40±2°C and relative humidity of 90 to
95% for 500
+24
–0
hrs.
Remove and let sit for 24±2 hrs. at room condition,* then
measure.
•Pretreatment
Apply test voltage for 60±5 min. at test temperature.
Remove and let sit for 24±2 hrs. at room condition.*
17
Humidity
Loading
(Application:
DC250V,
DC630V
item)
Appearance
No marking defects
Capacitance
Change
Within ±15%
D.F. 0.05 max.
I.R. CU0.01µF: More than 10MµF
CF0.01µF: More than 1,000M
Dielectric
Strength
In accordance with item No.4
Apply voltage as in Table for 1,000
+48
–0
hrs. at maximum
operating temperature ±3°C. Remove and let sit for 24±2 hrs. at
room condition,* then measure.
The charge/discharge current is less than 50mA.
•Pretreatment
Apply test voltage for 60±5 min. at test temperature.
Remove and let sit for 24±2 hrs. at room condition.*
16 Life
Appearance
No marking defects
Capacitance
Change
Within ±15% (rated voltage: DC250V, DC630V)
Within ±20% (rated voltage: DC1kV)
D.F. 0.05 max.
I.R. CU0.01µF: More than 10MµF
CF0.01µF: More than 1,000M
Dielectric
Strength
In accordance with item No.4
No. Test MethodSpecificationsItem
Medium Voltage Soft Termination Type GRJ Series Specifications and Test Methods
Rated Voltage Applied Voltage
150% of the rated voltage
120% of the rated voltage
110% of the rated voltage
DC250V
DC630V
DC1kV
GRJ Series Specifications and Test Methods
175
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General Purpose
GRM/GRJ Series
Only for ApplicationsAC250V Type
GA2 Series
Safety Standard
Certified GA3 Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
For General Purpose
GRM/GRJ Series
Only for Applications
GRM/DC3.15kV Series
AC250V Type
GA2 Series
Safety Standard
Certified GA3 Series
Product Information
176
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Chip Monolithic Ceramic Capacitors (Medium Voltage)
For LCD Backlight Inverter Circuit GRM/DC3.15kV Series
Part Number LW T
Dimensions (mm) e min. g min.
2.90.3GRM42A 2.0 ±0.24.5 ±0.3
L
T
W
e eg
1.0 +0, -0.3
Part Number Rated Voltage
(V) TC Code
(Standard) Capacitance
(pF) Length L
(mm) Width W
(mm) Thickness T
(mm)
Electrode g
min.
(mm)
Electrode e
(mm)
GRM42A5C3F050DW01L DC3150 C0G (EIA) 5.0 ±0.5pF 4.5 2.0 1.0 2.9 0.3 min.
GRM42A5C3F100JW01L DC3150 C0G (EIA) 10 ±5% 4.5 2.0 1.0 2.9 0.3 min.
GRM42A5C3F120JW01L DC3150 C0G (EIA) 12 ±5% 4.5 2.0 1.0 2.9 0.3 min.
GRM42A5C3F150JW01L DC3150 C0G (EIA) 15 ±5% 4.5 2.0 1.0 2.9 0.3 min.
GRM42A5C3F180JW01L DC3150 C0G (EIA) 18 ±5% 4.5 2.0 1.0 2.9 0.3 min.
GRM42A5C3F220JW01L DC3150 C0G (EIA) 22 ±5% 4.5 2.0 1.0 2.9 0.3 min.
GRM42A5C3F270JW01L DC3150 C0G (EIA) 27 ±5% 4.5 2.0 1.0 2.9 0.3 min.
GRM42A5C3F330JW01L DC3150 C0G (EIA) 33 ±5% 4.5 2.0 1.0 2.9 0.3 min.
GRM42A5C3F390JW01L DC3150 C0G (EIA) 39 ±5% 4.5 2.0 1.0 2.9 0.3 min.
GRM42A5C3F470JW01L DC3150 C0G (EIA) 47 ±5% 4.5 2.0 1.0 2.9 0.3 min.
Features
1. Low-loss and suitable for high frequency circuits
2. Murata's original internal electrode structure
realizes high flash-over voltage.
3. A new monolithic structure for small, surface-
mountable devices capable of operating at high
voltage levels.
4. Sn-plated external electrodes realize good
solderability.
5. Only for reflow soldering
6. Capacitance values less than 22pF can be used in
LCD backlight inverter circuits as long as
the applied voltage, peak to peak, is less
than 4.0kV at 100kHz or less.
Applications
Ideal for use as the ballast in LCD backlight
inverter.
Do not use these products in any Automotive
Power train or Safety equipment including Battery
chargers for Electric Vehicles and Plug-in Hybrids.
Only Murata products clearly stipulated as
"for Automotive use" can be used for automobile
applications such as Power train and Safety equipment.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Only for LCD Backlight Inverter Circuit Specifications and Test Methods
Continued on the following page.
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 2.
Then apply a force in the direction shown in Fig. 3.
The soldering should be done using the reflow method and
should be conducted with care so that the soldering is uniform
and free of defects such as heat shock.
Fig. 3
11 Deflection
No marking defects
Fig. 2
Solder the capacitor to the test jig (glass epoxy board).
The capacitor should be subjected to a simple harmonic motion
having a total amplitude of 1.5mm, the frequency being varied
uniformly between the approximate limits of 10 and 55Hz. The
frequency range, from 10 to 55Hz and return to 10Hz, should be
traversed in approximately 1 min. This motion should be applied
for a period of 2 hrs. in each of 3 mutually perpendicular
directions (total of 6 hrs.).10
Vibration
Resistance
Appearance
No defects or abnormalities
Capacitance
Within the specified tolerance
Q1,000 min.
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 1.
Then apply 10N force in the direction of the arrow.
The soldering should be done using the reflow method and
should be conducted with care so that the soldering is uniform
and free of defects such as heat shock.
Fig. 1
9Adhesive Strength
of Termination No removal of the terminations or other defect should occur.
The capacitance measurement should be made at each step
specified in the Table.
8Capacitance
Temperature
Characteristics
Temp. Coefficient
0T30ppm/D (Temp. Range: W25 to W125D)
0W30, Y72ppm/D (Temp. Range: Y55 to W25D)
7Q 1,000 min. The capacitance/Q should be measured at a frequency of
1T0.2MHz and a voltage of AC0.5 to 5V(r.m.s.)
6 Capacitance Within the specified tolerance
The insulation resistance should be measured with DC500T50V
and within 60T5 sec. of charging.
5
Insulation Resistance
(I.R.)
More than 10,000M
No failure should be observed when DC4095V is applied
between the terminations for 1 to 5 sec., provided the charge/
discharge current is less than 50mA.
4 Dielectric Strength No defects or abnormalities
Using calipers and micrometers3 Dimensions Within the specified dimension
Visual inspection2 Appearance No defects or abnormalities
Y1
Operating
Temperature Range
Y55 to W125D
No. Test MethodSpecificationsItem
Step Temperature (D)
25T2
Min. Operating Temp.T3
25T2
Max. Operating Temp.T2
25T2
1
2
3
4
5
LZW
(mm) a Dimension (mm)
3.5 b
7.0 c
2.4 d
1.04.5Z2.0
10N, 10T1s
Glass Epoxy Board
Solder resist
Cu
Glass Epoxy Board
UYZ¦ª«
UVZ¦§«
b
STUVWXYZ[\_`¤¥¦§¨©ª«¬°±
,
QRSTUV
Y]^`
¢£¤¥¦§
ª®¯±
STX¤¥©
T¥
a
TX¥©
UX¦©
c
VZ§«
Y]ª®
100
YZ]ª«®
RS£¤
40
φ4.5
t : 1.6
d
Capacitance meter
Flexure=1
20 50
R230
45 45 (in mm)
Pressurizing
speed: 1.0mm/s
Pressurize
GRM/DC3.15kV Series Specifications and Test Methods
177
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General Purpose
GRM/GRJ Series
Only for Applications
GRM/DC3.15kV Series
AC250V Type
GA2 Series
Safety Standard
Certified GA3 Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Only for LCD Backlight Inverter Circuit Specifications and Test Methods
Continued from the preceding page.
* "Room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Apply 120% of the rated voltage for 1,000
W48
Y 0
hrs. at maximum
operating temperature T3D.
Remove and let sit for 24T2 hrs. at room condition,* then
measure.
The charge/discharge current is less than 50mA.
16 Life
Appearance
No marking defects
Capacitance
Change
Within T3.0%
Q350 min.
I.R. More than 1,000M
Dielectric
Strength
In accordance with item No.4
Let the capacitor sit at 40T2D and relative humidity of 90 to 95%
for 500
W24
Y 0
hrs.
Remove and let sit for 24T2 hrs. at room condition,* then
measure.
15 Humidity
(Steady
State)
Appearance
No marking defects
Capacitance
Change
Within T5.0%
Q350 min.
I.R. More than 1,000M
Dielectric
Strength
In accordance with item No.4
Fix the capacitor to the supporting jig (glass epoxy board) shown
in Fig. 4.
Perform the 5 cycles according to the 4 heat treatments listed in
the following table.
Let sit for 24T2 hrs. at room condition,* then measure.
Fig. 4
14
Temperature
Cycle
Appearance
No marking defects
Capacitance
Change
Within T2.5%
Q1,000 min.
I.R. More than 10,000M
Dielectric
Strength
In accordance with item No.4
Preheat the capacitor as in table.
Immerse the capacitor in solder solution at 260T5D for 10T1 sec.
Let sit at room condition* for 24T2 hrs., then measure.
#Immersing speed: 25T2.5mm/s
*Preheating
13
Resistance
to Soldering
Heat
Appearance
No marking defects
Capacitance
Change
Within T2.5%
Q1,000 min.
I.R. More than 10,000M
Dielectric
Strength
In accordance with item No.4
Immerse the capacitor in a solution of ethanol (JIS-K-8101) and
rosin (JIS-K-5902) (25% rosin in weight proportion). Immerse in
solder solution for 2T0.5 sec.
Immersing speed: 25T2.5mm/s
Temp. of solder: 245T5°C Lead Free Solder (Sn-3.0Ag-0.5Cu)
235T5°C H60A or H63A Eutectic Solder
12 Solderability of
Termination 75% of the terminations are to be soldered evenly
and continuously.
No. Test MethodSpecificationsItem
Step Temperature
100 to 120D
170 to 200D
Time
1 min.
1 min.
1
2
Step Temperature (D)
Min. Operating Temp.T3
Room Temp.
Max. Operating Temp.T2
Room Temp.
Time (min.)
30T3
2 to 3
30T3
2 to 3
1
2
3
4
Solder resist
Cu
Glass Epoxy Board
GRM/DC3.15kV Series Specifications and Test Methods
178
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General Purpose
GRM/GRJ Series
Only for Applications
GRM/DC3.15kV Series
AC250V Type
GA2 Series
Safety Standard
Certified GA3 Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
For General Purpose
GRM/GRJ Series
Only for Applications
GR4 Series
AC250V Type
GA2 Series
Safety Standard
Certified GA3 Series
Product Information
179
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Chip Monolithic Ceramic Capacitors (Medium Voltage)
For Information Devices GR4 Series
Features
1. These items are designed specifically for
telecommunications devices (IEEE802.3) in
Ethernet LAN and primary-secondary coupling for
DC-DC converters.
2. A new monolithic structure for small, high
capacitance capable of operating at high voltage
levels
3. Sn-plated external electrodes realize good
solderability.
4. Only for reflow soldering
Applications
1. Ideal for use on telecommunications devices in
Ethernet LAN
2. Ideal for use as primary-secondary coupling for
DC-DC converters
Do not use these products in any Automotive
Power train or Safety equipment including Battery
charger for Electric Vehicles and Plug-in Hybrid.
Only Murata products clearly stipulated as
"for Automotive use" can be used for automobile
applications such as Power train and Safety equipment.
Part Number LW T
Dimensions (mm) e min.
GR442Q
GR443D 2.0 ±0.24.5 ±0.3 1.5 +0, -0.3
0.3
3.2 ±0.34.5 ±0.4 2.0 +0, -0.3
GR443Q
GR455D 1.5 +0, -0.3
2.0 +0, -0.3
g min.
2.5
3.25.0 ±0.45.7 ±0.4
L
T
W
e eg
Part Number Rated Voltage
(V) TC Code
(Standard) Capacitance
(pF) Length L
(mm) Width W
(mm) Thickness T
(mm)
Electrode g
min.
(mm)
Electrode e
(mm)
GR442QR73D101KW01L DC2000 X7R (EIA) 100 ±10% 4.5 2.0 1.5 2.5 0.3 min.
GR442QR73D121KW01L DC2000 X7R (EIA) 120 ±10% 4.5 2.0 1.5 2.5 0.3 min.
GR442QR73D151KW01L DC2000 X7R (EIA) 150 ±10% 4.5 2.0 1.5 2.5 0.3 min.
GR442QR73D181KW01L DC2000 X7R (EIA) 180 ±10% 4.5 2.0 1.5 2.5 0.3 min.
GR442QR73D221KW01L DC2000 X7R (EIA) 220 ±10% 4.5 2.0 1.5 2.5 0.3 min.
GR442QR73D271KW01L DC2000 X7R (EIA) 270 ±10% 4.5 2.0 1.5 2.5 0.3 min.
GR442QR73D331KW01L DC2000 X7R (EIA) 330 ±10% 4.5 2.0 1.5 2.5 0.3 min.
GR442QR73D391KW01L DC2000 X7R (EIA) 390 ±10% 4.5 2.0 1.5 2.5 0.3 min.
GR442QR73D471KW01L DC2000 X7R (EIA) 470 ±10% 4.5 2.0 1.5 2.5 0.3 min.
GR442QR73D561KW01L DC2000 X7R (EIA) 560 ±10% 4.5 2.0 1.5 2.5 0.3 min.
GR442QR73D681KW01L DC2000 X7R (EIA) 680 ±10% 4.5 2.0 1.5 2.5 0.3 min.
GR442QR73D821KW01L DC2000 X7R (EIA) 820 ±10% 4.5 2.0 1.5 2.5 0.3 min.
GR442QR73D102KW01L DC2000 X7R (EIA) 1000 ±10% 4.5 2.0 1.5 2.5 0.3 min.
GR442QR73D122KW01L DC2000 X7R (EIA) 1200 ±10% 4.5 2.0 1.5 2.5 0.3 min.
GR442QR73D152KW01L DC2000 X7R (EIA) 1500 ±10% 4.5 2.0 1.5 2.5 0.3 min.
GR443QR73D182KW01L DC2000 X7R (EIA) 1800 ±10% 4.5 3.2 1.5 2.5 0.3 min.
GR443QR73D222KW01L DC2000 X7R (EIA) 2200 ±10% 4.5 3.2 1.5 2.5 0.3 min.
GR443QR73D272KW01L DC2000 X7R (EIA) 2700 ±10% 4.5 3.2 1.5 2.5 0.3 min.
GR443QR73D332KW01L DC2000 X7R (EIA) 3300 ±10% 4.5 3.2 1.5 2.5 0.3 min.
GR443QR73D392KW01L DC2000 X7R (EIA) 3900 ±10% 4.5 3.2 1.5 2.5 0.3 min.
GR443DR73D472KW01L DC2000 X7R (EIA) 4700 ±10% 4.5 3.2 2.0 2.5 0.3 min.
GR455DR73D103KW01L DC2000 X7R (EIA) 10000 ±10% 5.7 5.0 2.0 3.2 0.3 min.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Only for Information Devices Specifications and Test Methods
Continued on the following page.
* "Room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Solder the capacitor to the test jig (glass epoxy board).
The capacitor should be subjected to a simple harmonic motion
having a total amplitude of 1.5mm, the frequency being varied
uniformly between the approximate limits of 10 and 55Hz. The
frequency range, from 10 to 55Hz and return to 10Hz, should be
traversed in approximately 1 min. This motion should be applied
for a period of 2 hrs. in each of 3 mutually perpendicular
directions (total of 6 hrs.).11
Vibration
Resistance
Appearance
No defects or abnormalities
Capacitance
Within the specified tolerance
D.F. 0.025 max.
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 1.
Then apply 10N force in the direction of the arrow.
The soldering should be done using the reflow method and
should be conducted with care so that the soldering is uniform
and free of defects such as heat shock.
Fig. 1
10 Adhesive Strength
of Termination No removal of the terminations or other defect should occur.
The capacitance measurement should be made at each step
specified in the Table.
#Pretreatment
Perform a heat treatment at 150
W0
Y10
D for 60T5 min. and then
let sit for 24T2 hrs. at room condition.*
9Capacitance
Temperature
Characteristics
Cap. Change
within T15%
(Temp. Range: Y55 to W125D)
8Dissipation
Factor (D.F.) 0.025 max. The capacitance/D.F. should be measured at a frequency of
1T0.2kHz and a voltage of AC1T0.2V(r.m.s.)
7 Capacitance Within the specified tolerance
The insulation resistance should be measured with DC500T50V
and within 60T5 sec. of charging.
6
Insulation Resistance
(I.R.)
More than 6,000M
10 impulses of alternating polarity are subjected.
(5 impulses for each polarity)
The interval between impulses is 60 sec.
Applied Pulse: 1.2/50µs
Applied Voltage: 2.5kVo-p
5 Pulse Voltage No self healing breakdowns or flash-overs have taken place in
the capacitor.
No failure should be observed when voltage in the table is
applied between the terminations, provided the charge/discharge
current is less than 50mA.
4 Dielectric Strength No defects or abnormalities
Using calipers and micrometers3 Dimensions Within the specified dimensions
Visual inspection2 Appearance No defects or abnormalities
Y1
Operating
Temperature Range
Y55 to W125D
No. Test MethodSpecificationsItem
Rated Voltage Test Voltage
120% of the rated voltage
AC1500V(r.m.s.)
Time
60T1 sec.
60T1 sec.
DC2kV
Step Temperature (D)
25T2
Min. Operating Temp.T3
25T2
Max. Operating Temp.T2
25T2
1
2
3
4
5
10N, 10T1s
Glass Epoxy Board
Solder resist
Cu
Glass Epoxy Board
GR4 Series Specifications and Test Methods
180
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General Purpose
GRM/GRJ Series
Only for Applications
GR4 Series
AC250V Type
GA2 Series
Safety Standard
Certified GA3 Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Only for Information Devices Specifications and Test Methods
Continued from the preceding page.
Continued on the following page.
* "Room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Let the capacitor sit at 40T2D and relative humidity of 90 to 95%
for 500
W24
Y 0
hrs.
Remove and let sit for 24T2 hrs. at room condition,* then
measure.
#Pretreatment
Perform a heat treatment at 150
W 0
Y10
D for 60T5 min. and then
let sit for 24T2 hrs. at room condition.*
16 Humidity
(Steady
State)
Appearance
No marking defects
Capacitance
Change
Within T15%
D.F. 0.05 max.
I.R. More than 1,000M
Dielectric
Strength
In accordance with item No.4
Fix the capacitor to the supporting jig (glass epoxy board) shown
in Fig. 4.
Perform the 5 cycles according to the 4 heat treatments listed in
the following table.
Let sit for 24T2 hrs. at room condition,* then measure.
#Pretreatment
Perform a heat treatment at 150
W 0
Y10
D for 60T5 min. and then
let sit for 24T2 hrs. at room condition.*
Fig. 4
15
Temperature
Cycle
Appearance
No marking defects
Capacitance
Change
Within T15%
D.F. 0.05 max.
I.R. More than 3,000M
Dielectric
Strength
In accordance with item No.4
Preheat the capacitor as in table.
Immerse the capacitor in solder solution at 260T5D for 10T1
sec. Let sit at room condition* for 24T2 hrs., then measure.
#Immersing speed: 25T2.5mm/s
#Pretreatment
Perform a heat treatment at 150
W 0
Y10
D for 60T5 min. and then
let sit for 24T2 hrs. at room condition.*
*Preheating
14
Resistance
to Soldering
Heat
Appearance
No marking defects
Capacitance
Change
Within T10%
D.F. 0.025 max.
I.R. More than 1,000M
Dielectric
Strength
In accordance with item No.4
Immerse the capacitor in a solution of ethanol (JIS-K-8101) and
rosin (JIS-K-5902) (25% rosin in weight proportion).
Immerse in solder solution for 2T0.5 sec.
Immersing speed: 25T2.5mm/s
Temp. of solder: 245T5°C Lead Free Solder (Sn-3.0Ag-0.5Cu)
235T5°C H60A or H63A Eutectic Solder
13 Solderability of
Termination 75% of the terminations are to be soldered evenly and continuously.
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 2.
Then apply a force in the direction shown in Fig. 3.
The soldering should be done using the reflow method and
should be conducted with care so that the soldering is uniform
and free of defects such as heat shock.
Fig. 3
12 Deflection
No marking defects
Fig. 2
No. Test MethodSpecificationsItem
LZW
(mm) a Dimension (mm)
3.5
3.5
4.5
b
7.0
7.0
8.0
c
2.4
3.7
5.6
d
1.0
4.5Z2.0
4.5Z3.2
5.7Z5.0
Step Temperature
100 to 120D
170 to 200D
Time
1 min.
1 min.
1
2
Step Temperature (D)
Min. Operating Temp.T3
Room Temp.
Max. Operating Temp.T2
Room Temp.
Time (min.)
30T3
2 to 3
30T3
2 to 3
1
2
3
4
Solder resist
Cu
Glass Epoxy Board
TUX¥¦©
,QU¢¦
b
RSTUVWXZ[£¤¥¦§¨©«¬
,

QT
Y\]^_`
¢¥
ª®¯°±
ST¤¥
ST
_
¤¥
°
a
c
,QUV¢¦§
XY\©ª
100
40
φ4.5
t : 1.6
d
Capacitance meter
Flexure=1
20 50
R230
45 45 (in mm)
Pressurizing
speed: 1.0mm/s
Pressurize
GR4 Series Specifications and Test Methods
181
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General Purpose
GRM/GRJ Series
Only for Applications
GR4 Series
AC250V Type
GA2 Series
Safety Standard
Certified GA3 Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Only for Information Devices Specifications and Test Methods
Continued from the preceding page.
* "Room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Apply 110% of the rated voltage for 1,000
W48
Y 0
hrs. at maximum
operating temperature T3D. Remove and let sit for 24T2 hrs. at
room condition,* then measure.
The charge/discharge current is less than 50mA.
#Pretreatment
Apply test voltage for 60T5 min. at test temperature.
Remove and let sit for 24T2 hrs. at room condition.*
17 Life
Appearance
No marking defects
Capacitance
Change
Within T20%
D.F. 0.05 max.
I.R. More than 2,000M
Dielectric
Strength
In accordance with item No.4
No. Test MethodSpecificationsItem
GR4 Series Specifications and Test Methods
182
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General Purpose
GRM/GRJ Series
Only for Applications
GR4 Series
AC250V Type
GA2 Series
Safety Standard
Certified GA3 Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
For General Purpose
GRM/GRJ Series
Only for Applications
GR7 Series
AC250V Type
GA2 Series
Safety Standard
Certified GA3 Series
Product Information
183
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Chip Monolithic Ceramic Capacitors (Medium Voltage)
For Camera Flash Circuit GR7 Series
Features
1. Suitable for the trigger of the flash circuit,
because real capacitance is stable during
operating voltage.
2. The thin type fits thinner cameras.
3. Sn-plated external electrodes realize good
solderability.
4. For flow and reflow soldering
Applications
For strobe circuit
Do not use these products in any Automotive
Power train or Safety equipment including Battery
chargers for Electric Vehicles and Plug-in Hybrids.
Only Murata products clearly stipulated as
"for Automotive use" can be used for automobile
applications such as Power train and Safety equipment.
L
T
W
e eg
Part Number LW T
Dimensions (mm) g min.
GR731A
GR731B 1.0 +0, -0.3 1.21.6 ±0.23.2 ±0.2 1.25 +0, -0.3
GR721A 0.7
e min.
0.3
1.25 ±0.22.0 ±0.2 1.0 +0, -0.3
GR721B 1.25 ±0.2
GR731C 1.6 ±0.2
Part Number Rated Voltage
(V) TC Code
(Standard) Capacitance
(pF) Length L
(mm) Width W
(mm) Thickness T
(mm)
Electrode g
min.
(mm)
Electrode e
(mm)
GR721AW0BB103KW01D DC350 - 10000 ±10% 2.0 1.25 1.0 0.7 0.3 min.
GR731AW0BB103KW01D DC350 - 10000 ±10% 3.2 1.6 1.0 1.2 0.3 min.
GR721AW0BB153KW01D DC350 - 15000 ±10% 2.0 1.25 1.0 0.7 0.3 min.
GR731AW0BB153KW01D DC350 - 15000 ±10% 3.2 1.6 1.0 1.2 0.3 min.
GR721BW0BB223KW03L DC350 - 22000 ±10% 2.0 1.25 1.25 0.7 0.3 min.
GR731AW0BB223KW01D DC350 - 22000 ±10% 3.2 1.6 1.0 1.2 0.3 min.
GR731BW0BB223KW01L DC350 - 22000 ±10% 3.2 1.6 1.25 1.2 0.3 min.
GR721BW0BB273KW03L DC350 - 27000 ±10% 2.0 1.25 1.25 0.7 0.3 min.
GR731AW0BB273KW01D DC350 - 27000 ±10% 3.2 1.6 1.0 1.2 0.3 min.
GR731AW0BB333KW01D DC350 - 33000 ±10% 3.2 1.6 1.0 1.2 0.3 min.
GR731BW0BB333KW01L DC350 - 33000 ±10% 3.2 1.6 1.25 1.2 0.3 min.
GR731CW0BB473KW03L DC350 - 47000 ±10% 3.2 1.6 1.6 1.2 0.3 min.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Only for Camera Flash Circuit Specifications and Test Methods
Continued on the following page.
* "Room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
10N, 10T1s
Glass Epoxy Board
Solder resist
Cu
Glass Epoxy Board
Step Temperature (D)
25T2
Min. Operating Temp.T3
25T2
Max. Operating Temp.T2
25T2
1
2
3
4
5
Solder the capacitor to the test jig (glass epoxy board).
The capacitor should be subjected to a simple harmonic motion
having a total amplitude of 1.5mm, the frequency being varied
uniformly between the approximate limits of 10 and 55Hz. The
frequency range, from 10 to 55Hz and return to 10Hz, should be
traversed in approximately 1 min. This motion should be applied
for a period of 2 hrs. in each of 3 mutually perpendicular
directions (total of 6 hrs.).10
Vibration
Resistance
Appearance
No defects or abnormalities
Capacitance
Within the specified tolerance
D.F. 0.025 max.
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 1.
Then apply 10N force in the direction of the arrow.
The soldering should be done using the reflow method and
should be conducted with care so that the soldering is uniform
and free of defects such as heat shock.
Fig. 1
9Adhesive Strength
of Termination No removal of the terminations or other defect should occur.
The capacitance measurement should be made at each step
specified in the Table.
#Pretreatment
Perform a heat treatment at 150
W0
Y10
D for 60T5 min. and then
let sit for 24T2 hrs. at room condition.*
8Capacitance
Temperature
Characteristics
Cap. Change
Within T10% (Apply DC350V bias)
Within
W22
Y33
% (No DC bias)
(Temp. Range : Y55 to W125D)
7Dissipation
Factor (D.F.) 0.025 max. The capacitance/D.F. should be measured at a frequency of
1T0.2kHz and a voltage of AC1T0.2V(r.m.s.)
6 Capacitance Within the specified tolerance
The insulation resistance should be measured with DC250T50V
and within 60T5 sec. of charging.
5
Insulation Resistance
(I.R.)
CU0.01µF: More than 100MµF
CF0.01µF: More than 10,000M
No failure should be observed when DC500V is applied between
the terminations for 1 to 5 sec., provided the charge/discharge
current is less than 50mA.
4 Dielectric Strength No defects or abnormalities
Using calipers and micrometers3 Dimensions Within the specified dimensions
Visual inspection2 Appearance No defects or abnormalities
Y1
Operating
Temperature Range
Y55 to W125D
No. Test MethodSpecificationsItem
GR7 Series Specifications and Test Methods
184
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General Purpose
GRM/GRJ Series
Only for Applications
GR7 Series
AC250V Type
GA2 Series
Safety Standard
Certified GA3 Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Only for Camera Flash Circuit Specifications and Test Methods
Continued from the preceding page.
Continued on the following page.
* "Room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Let the capacitor sit at 40T2D and relative humidity of 90 to 95%
for 500
W24
Y 0
hrs.
Remove and let sit for 24T2 hrs. at room condition,* then
measure.
#Pretreatment
Perform a heat treatment at 150
W 0
Y10
D for 60T5 min. and then
let sit for 24T2 hrs. at room condition.*
15
Humidity
(Steady
State)
Appearance
No marking defects
Capacitance
Change
Within T15%
D.F. 0.05 max.
I.R. CU0.01µF: More than 10MµF
CF0.01µF: More than 1,000M
Dielectric
Strength
In accordance with item No.4
Fix the capacitor to the supporting jig (glass epoxy board) shown
in Fig. 4.
Perform the 5 cycles according to the 4 heat treatments listed in
the following table.
Let sit for 24T2 hrs. at room condition,* then measure.
#Pretreatment
Perform a heat treatment at 150
W 0
Y10
D for 60T5 min. and then
let sit for 24T2 hrs. at room condition.*
Fig. 4
14
Temperature
Cycle
Appearance
No marking defects
Capacitance
Change
Within T7.5%
D.F. 0.025 max.
I.R. CU0.01µF: More than 100MµF
CF0.01µF: More than 10,000M
Dielectric
Strength
In accordance with item No.4
Preheat the capacitor at 120 to 150D for 1 min.
Immerse the capacitor in solder solution at 260T5D for 10T1
sec. Let sit at room condition* for 24T2 hrs., then measure.
#Immersing speed: 25T2.5mm/s
#Pretreatment
Perform a heat treatment at 150
W 0
Y10
D for 60T5 min. and then
let sit for 24T2 hrs. at room condition.*
13
Resistance
to Soldering
Heat
Appearance
No marking defects
Capacitance
Change
Within T10%
D.F. 0.025 max.
I.R. CU0.01µF: More than 100MµF
CF0.01µF: More than 10,000M
Dielectric
Strength
In accordance with item No.4
Solder resist
Cu
Glass Epoxy Board
WX\¨©
,QTU¢¥¦
b
RSUVWXZ[£¤¦§¨©«¬
,

QT
Y\]^_`
¢¥
ª®¯°±
ST¤¥
ST
_
¤¥
°
a
c
,QUV¢¦§
X\©
100
40
φ4.5
t : 1.6
d
Capacitance meter
Flexure=1
(in mm)
20 50
R230
45 45
Pressurizing
speed: 1.0mm/s
Pressurize
Step Temperature (D)
Min. Operating Temp.T3
Room Temp.
Max. Operating Temp.T2
Room Temp.
Time (min.)
30T3
2 to 3
30T3
2 to 3
1
2
3
4
LZW
(mm) a Dimension (mm)
1.2
2.2
b
4.0
5.0
c
1.65
2.0
d
1.0
2.0Z1.25
3.2Z1.6
Immerse the capacitor in a solution of ethanol (JIS-K-8101) and
rosin (JIS-K-5902) (25% rosin in weight proportion).
Immerse in solder solution for 2T0.5 sec.
Immersing speed: 25T2.5mm/s
Temp. of solder: 245T5°C Lead Free Solder (Sn-3.0Ag-0.5Cu)
235T5°C H60A or H63A Eutectic Solder
12 Solderability of
Termination 75% of the terminations are to be soldered evenly and continuously.
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 2.
Then apply a force in the direction shown in Fig. 3.
The soldering should be done using the reflow method and
should be conducted with care so that the soldering is uniform
and free of defects such as heat shock.
Fig. 3
11 Deflection
No marking defects
Fig. 2
No. Test MethodSpecificationsItem
GR7 Series Specifications and Test Methods
185
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General Purpose
GRM/GRJ Series
Only for Applications
GR7 Series
AC250V Type
GA2 Series
Safety Standard
Certified GA3 Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Only for Camera Flash Circuit Specifications and Test Methods
Continued from the preceding page.
* "Room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Apply the rated voltage at 40T2D and relative humidity of 90 to
95% for 500
W24
Y 0
hrs.
Remove and let sit for 24T2 hrs. at room condition,* then
measure.
#Pretreatment
Apply test voltage for 60T5 min. at test temperature.
Remove and let sit for 24T2 hrs. at room condition.*
17
Humidity
Loading
Appearance
No marking defects
Capacitance
Change
Within T15%
D.F. 0.05 max.
I.R. CU0.01µF: More than 10MµF
CF0.01µF: More than 1,000M
Dielectric
Strength
In accordance with item No.4
Apply DC350V for 1,000
W48
Y 0
hrs. at maximum operating
temperature T3D. Remove and let sit for 24T2 hrs. at room
condition,* then measure.
The charge/discharge current is less than 50mA.
#Pretreatment
Apply test voltage for 60T5 min. at test temperature.
Remove and let sit for 24T2 hrs. at room condition.*
16 Life
Appearance
No marking defects
Capacitance
Change
Within T15%
D.F. 0.05 max.
I.R. CU0.01µF: More than 10MµF
CF0.01µF: More than 1,000M
Dielectric
Strength
In accordance with item No.4
No. Test MethodSpecificationsItem
GR7 Series Specifications and Test Methods
186
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General Purpose
GRM/GRJ Series
Only for Applications
GR7 Series
AC250V Type
GA2 Series
Safety Standard
Certified GA3 Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
For General Purpose
GRM/GRJ Series
Only for ApplicationsAC250V Type
GA2 Series
Safety Standard
Certified GA3 Series
Product Information
187
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Chip Monolithic Ceramic Capacitors
AC250V Type (Which Meet Japanese Law) GA2 Series
Features
1. Chip monolithic ceramic capacitor for AC lines.
2. A new monolithic structure for small, high
capacitance capable of operating at high voltage
levels.
3. Sn-plated external electrodes realize good
solderability.
4. Only for reflow soldering
5. Capacitance 0.01 to 0.1uF for connecting lines and
470 to 4700pF for connecting lines to earth.
Applications
Noise suppression filters for switching power supplies,
telephones, facsimiles, modems.
Do not use these products in any Automotive
Power train or Safety equipment including Battery
chargers for Electric Vehicles and Plug-in Hybrids.
Only Murata products clearly stipulated as
"for Automotive use" can be used for automobile
applications such as Power train and Safety equipment.
Reference Standard
GA2 series obtains no safety approval.
This series is based on the standards of the
electrical appliance and material safety law of Japan
(separated table 4).
Part Number LW T
Dimensions (mm) g min.e min.
2.0 ±0.2
GA242Q 2.5
3.2
0.3
4.5 ±0.3 1.5 +0, -0.3
3.2 ±0.3
GA243D 4.5 ±0.4 2.0 +0, -0.3
GA243Q 1.5 +0, -0.3
5.0 ±0.4GA255D 5.7 ±0.4 2.0 +0, -0.3
L
T
W
e eg
Part Number Rated Voltage
(V) TC Code
(Standard) Capacitance Length L
(mm) Width W
(mm) Thickness T
(mm)
Electrode g
min.
(mm)
Electrode e
(mm)
GA242QR7E2471MW01L AC250 (r.m.s.) X7R (EIA) 470pF ±20% 4.5 2.0 1.5 2.5 0.3 min.
GA242QR7E2102MW01L AC250 (r.m.s.) X7R (EIA) 1000pF ±20% 4.5 2.0 1.5 2.5 0.3 min.
GA243QR7E2222MW01L AC250 (r.m.s.) X7R (EIA) 2200pF ±20% 4.5 3.2 1.5 2.5 0.3 min.
GA243QR7E2332MW01L AC250 (r.m.s.) X7R (EIA) 3300pF ±20% 4.5 3.2 1.5 2.5 0.3 min.
GA243DR7E2472MW01L AC250 (r.m.s.) X7R (EIA) 4700pF ±20% 4.5 3.2 2.0 2.5 0.3 min.
GA243QR7E2103MW01L AC250 (r.m.s.) X7R (EIA) 10000pF ±20% 4.5 3.2 1.5 2.5 0.3 min.
GA243QR7E2223MW01L AC250 (r.m.s.) X7R (EIA) 22000pF ±20% 4.5 3.2 1.5 2.5 0.3 min.
GA243DR7E2473MW01L AC250 (r.m.s.) X7R (EIA) 47000pF ±20% 4.5 3.2 2.0 2.5 0.3 min.
GA255DR7E2104MW01L AC250 (r.m.s.) X7R (EIA) 0.10µF ±20% 5.7 5.0 2.0 3.2 0.3 min.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
AC250V(r.m.s.) Type (Which Meet Japanese Law) Specifications and Test Methods
Continued on the following page.
* "Room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Solder the capacitor to the test jig (glass epoxy board).
The capacitor should be subjected to a simple harmonic motion
having a total amplitude of 1.5mm, the frequency being varied
uniformly between the approximate limits of 10 and 55Hz. The
frequency range, from 10 to 55Hz and return to 10Hz, should be
traversed in approximately 1 min. This motion should be applied
for a period of 2 hrs. in each of 3 mutually perpendicular
directions (total of 6 hrs.).
11
Vibration
Resistance
Appearance
No defects or abnormalities
Capacitance
Within the specified tolerance
D.F. 0.025 max.
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 1.
Then apply 10N force in the direction of the arrow. The soldering
should be done using the reflow method and should be
conducted with care so that the soldering is uniform and free of
defects such as heat shock.
Fig. 1
10 Adhesive Strength
of Termination No removal of the terminations or other defects should occur.
As in Fig., discharge is made 50 times at 5 sec. intervals from
the capacitor (Cd) charged at DC voltage of specified.
Ct: Capacitor under test Cd: 0.001µF
R1: 1,000 R2: 100M R3: Surge resistance
9
Discharge
Test
(Application:
Nominal
Capacitance
CF10,000pF)
Appearance
No defects or abnormalities
The capacitance measurement should be made at each step
specified in the Table.
#Pretreatment
Perform a heat treatment at 150
W 0
Y10
D for 60T5 min. and then
let sit for 24T2 hrs. at room condition.*
8Capacitance
Temperature
Characteristics
Cap. Change
Within T15%
(Temp. Range: Y55 to W125D)
7Dissipation
Factor (D.F.) 0.025 max. The capacitance/D.F. should be measured at a frequency of
1T0.2kHz and a voltage of AC1T0.2V (r.m.s.)
6 Capacitance Within the specified tolerance
The insulation resistance should be measured with DC500T50V
and within 60T5 sec. of charging.
5
Insulation Resistance
(I.R.)
More than 2,000M
No failure should be observed when voltage in the table is
applied between the terminations for 60T1 sec., provided the
charge/discharge current is less than 50mA.
4 Dielectric Strength No defects or abnormalities
Using calipers and micrometers3 Dimensions Within the specified dimensions
Visual inspection2 Appearance No defects or abnormalities
Y1
Operating
Temperature Range
Y55 to W125D
No. Test MethodSpecificationsItem
Nominal Capacitance Test Voltage
AC575V (r.m.s.)
AC1500V (r.m.s.)
CU10,000pF
CF10,000pF
Step Temperature (D)
25T2
Min. Operating Temp.T3
25T2
Max. Operating Temp.T2
25T2
1
2
3
4
5
10N, 10T1s
Glass Epoxy Board
Solder resist
Cu
Glass Epoxy Board
R3 R1
R2
Ct
Cd
10kV V
GA2 Series Specifications and Test Methods
188
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General Purpose
GRM/GRJ Series
Only for ApplicationsAC250V Type
GA2 Series
Safety Standard
Certified GA3 Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
AC250V(r.m.s.) Type (Which Meet Japanese Law) Specifications and Test Methods
Continued from the preceding page.
Continued on the following page.
* "Room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Fix the capacitor to the supporting jig (glass epoxy board) shown
in Fig. 4.
Perform the 5 cycles according to the 4 heat treatments listed in
the following table.
Let sit for 24T2 hrs. at room condition,* then measure.
#Pretreatment
Perform a heat treatment at 150
W 0
Y10
D for 60T5 min. and then
let sit for 24T2 hrs. at room condition.*
Fig. 4
16
Temperature
Cycle
Appearance
No marking defects
Capacitance
Change
Within T15%
D.F. 0.05 max.
I.R. More than 2,000M
Dielectric
Strength
In accordance with item No.4
Preheat the capacitor as in table.
Immerse the capacitor in solder solution at 260T5D for 10T1
sec. Let sit at room condition* for 24T2 hrs., then measure.
#Immersing speed: 25T2.5mm/s
#Pretreatment
Perform a heat treatment at 150
W 0
Y10
D for 60T5 min. and then
let sit for 24T2 hrs. at room condition.*
*Preheating
15
Resistance
to Soldering
Heat
Appearance
No marking defects
Capacitance
Change
Within T10%
D.F. 0.025 max.
I.R. More than 2,000M
Dielectric
Strength
In accordance with item No.4
The capacitor should be subjected to 40T2D, relative humidity of
90 to 98% for 8 hrs., and then removed in room condition* for 16
hrs. until 5 cycles.
14
Humidity
Insulation
Appearance
No marking defects
Capacitance
Change
Within T15%
D.F. 0.05 max.
I.R. More than 1,000M
Dielectric
Strength
In accordance with item No.4
Immerse the capacitor in a solution of ethanol (JIS-K-8101) and
rosin (JIS-K-5902) (25% rosin in weight proportion).
Immerse in solder solution for 2T0.5 sec.
Immersing speed: 25T2.5mm/s
Temp. of solder: 245T5°C Lead Free Solder (Sn-3.0Ag-0.5Cu)
235T5°C H60A or H63A Eutectic Solder
13 Solderability of
Termination 75% of the terminations are to be soldered evenly and continuously.
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 2.
Then apply a force in the direction shown in Fig. 3. The soldering
should be done using the reflow method and should be
conducted with care so that the soldering is uniform and free of
defects such as heat shock.
Fig. 3
12 Deflection
No marking defects
Fig. 2
No. Test MethodSpecificationsItem
LZW
(mm) a Dimension (mm)
3.5
3.5
4.5
b
7.0
7.0
8.0
c
2.4
3.7
5.6
d
1.0
4.5Z2.0
4.5Z3.2
5.7Z5.0
Step Temperature
100 to 120D
170 to 200D
Time
1 min.
1 min.
1
2
Step Temperature (D)
Min. Operating Temp.T3
Room Temp.
Max. Operating Temp.T2
Room Temp.
Time (min.)
30T3
2 to 3
30T3
2 to 3
1
2
3
4
Solder resist
Cu
Glass Epoxy Board
TX¥©
,QU¢¦
b
RSTUVWXZ[£¤¥¦§¨©«¬
,

QT
Y\]^_`
¢¥
ª®¯°±
ST¤¥
ST
_
¤¥
°
a
ST¤¥
ST¤¥
c
,QUV¢¦§
X\©
100
Yª
]^®¯
40
φ4.5
t : 1.6
d
Capacitance meter
Flexure=1
(in mm)
20 50
R230
45 45
Pressurizing
speed: 1.0mm/s
Pressurize
GA2 Series Specifications and Test Methods
189
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General Purpose
GRM/GRJ Series
Only for ApplicationsAC250V Type
GA2 Series
Safety Standard
Certified GA3 Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
AC250V(r.m.s.) Type (Which Meet Japanese Law) Specifications and Test Methods
Continued from the preceding page.
* "Room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Apply the rated voltage at 40T2D and relative humidity of 90 to
95% for 500
W24
Y 0
hrs.
Remove and let sit for 24T2 hrs. at room condition,* then
measure.
#Pretreatment
Apply test voltage for 60T5 min. at test temperature.
Remove and let sit for 24T2 hrs. at room condition.*
19
Humidity
Loading
Appearance
No marking defects
Capacitance
Change
Within T15%
D.F. 0.05 max.
I.R. More than 1,000M
Dielectric
Strength
In accordance with item No.4
Apply voltage and time as in Table at maximum operating
temperature T3D. Remove and let sit for 24T2 hrs. at room
condition,* then measure. The charge / discharge current is
less than 50mA.
* Except that once each hour the voltage is increased to
AC1,000V (r.m.s.) for 0.1 sec.
#Pretreatment
Apply test voltage for 60T5 min. at test temperature.
Remove and let sit for 24T2 hrs. at room condition.*
18 Life
Appearance
No marking defects
Capacitance
Change
Within T20%
D.F. 0.05 max.
I.R. More than 1,000M
Dielectric
Strength
In accordance with item No.4
Let the capacitor sit at 40T2D and relative humidity of 90 to 95%
for 500
W24
Y 0
hrs.
Remove and let sit for 24T2 hrs. at room condition,* then
measure.
#Pretreatment
Perform a heat treatment at 150
W 0
Y10
D for 60T5 min. and then
let sit for 24T2 hrs. at room condition.*
17
Humidity
(Steady
State)
Appearance
No marking defects
Capacitance
Change
Within T15%
D.F. 0.05 max.
I.R. More than 1,000M
Dielectric
Strength
In accordance with item No.4
No. Test MethodSpecificationsItem
Nominal Capacitance Test Time
1,000
W48
Y 0
hrs.
1,500
W48
Y 0
hrs.
Test Voltage
AC300V (r.m.s.)
AC500V (r.m.s.) *
CU10,000pF
CF10,000pF
GA2 Series Specifications and Test Methods
190
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General Purpose
GRM/GRJ Series
Only for ApplicationsAC250V Type
GA2 Series
Safety Standard
Certified GA3 Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
For General Purpose
GRM/GRJ Series
Only for ApplicationsAC250V Type
GA2 Series
Safety Standard
Certified GA3 Series
Product Information
191
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Chip Monolithic Ceramic Capacitors
Safety Standard Certified GA3 Series UL, IEC60384-14 Class X1/Y2 Type GC
Features
1. Chip monolithic ceramic capacitor (certified as
conforming to safety standards) for AC lines.
2. A new monolithic structure for small, high
capacitance capable of operating at high voltage
levels.
3. Compared to lead type capacitors, this new
capacitor is greatly downsized and low-profiled to
1/10 or less in volume, and 1/4 or less in height.
4. Type GC can be used as an X1-class and Y2-class
capacitor, line-by-pass capacitor of UL1414.
5. +125 degree C guaranteed
6. Only for reflow soldering
Applications
1. Ideal for use as Y capacitor or X capacitor for
various switching power supplies
2. Ideal for modem applications
Do not use these products in any Automotive
Power train or Safety equipment including Battery
chargers for Electric Vehicles and Plug-in Hybrids.
Only Murata products clearly stipulated as
"for Automotive use" can be used for automobile
applications such as Power train and Safety equipment.
Part Number LTW
Dimensions (mm) g min.e min.
2.0 ±0.3
GA355D 5.7 ±0.4 4.00.35.0 ±0.4
L
T
W
e eg
Standard Certification
Standard No. Rated VoltageClass
Line By-passUL
VDE
BSI
SEMKO
ESTI
UL1414
IEC 60384-14
EN 60384-14
EN 60065 (14.2)
IEC 60384-14
EN 60384-14
IEC 60384-14
EN 60384-14
EN 60065
IEC 60384-14
AC250V
(r.m.s.)
X1, Y2
Part Number Rated Voltage
(V) TC Code
(Standard) Capacitance
(pF) Length L
(mm) Width W
(mm) Thickness T
(mm)
Electrode g
min.
(mm)
Electrode e
(mm)
GA355DR7GC101KY02L AC250 (r.m.s.) X7R (EIA) 100 ±10% 5.7 5.0 2.0 4.0 0.3 min.
GA355DR7GC151KY02L AC250 (r.m.s.) X7R (EIA) 150 ±10% 5.7 5.0 2.0 4.0 0.3 min.
GA355DR7GC221KY02L AC250 (r.m.s.) X7R (EIA) 220 ±10% 5.7 5.0 2.0 4.0 0.3 min.
GA355DR7GC331KY02L AC250 (r.m.s.) X7R (EIA) 330 ±10% 5.7 5.0 2.0 4.0 0.3 min.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
For General Purpose
GRM/GRJ Series
Only for ApplicationsAC250V Type
GA2 Series
Safety Standard
Certified GA3 Series
Product Information
192
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Chip Monolithic Ceramic Capacitors
Safety Standard Certified GA3 Series IEC60384-14 Class Y2, X1/Y2 Type GF
Features
1. Available for equipment based on IEC/EN60950
and UL1950. Besides, the GA352/355 types are
available for equipment based on IEC/EN60065,
UL1492, and UL6500.
2. Type GF can be used as a Y2-class capacitor.
3. A new monolithic structure for small, high
capacitance capable of operating at high voltage
levels.
4. +125 degree C guaranteed
5. Only for reflow soldering
Applications
1. Ideal for use on line filters and couplings for
DAA modems without transformers
2. Ideal for use on line filters for information
equipment
3. Ideal for use as Y capacitor or X capacitor for
various switching power supplies (GA352/355 types
only)
Do not use these products in any Automotive
Power train or Safety equipment including Battery
chargers for Electric Vehicles and Plug-in Hybrids.
Only Murata products clearly stipulated as
"for Automotive use" can be used for automobile
applications such as Power train and Safety equipment.
Part Number LTW
Dimensions (mm) g min.e min.
1.0 +0, -0.3
2.0 ±0.2
1.5 +0, -0.3
GA342A
GA342D
GA342Q
GA352Q
GA355D
GA355Q
4.5 ±0.3 2.5
4.0
0.3
2.0 ±0.2
5.7 ±0.4 2.8 ±0.3
5.0 ±0.4
1.5 +0, -0.3
2.0 +0, -0.3
1.5 +0, -0.3
L
T
W
e eg
Standard Certification
Y
Y
Y
Y
UL
VDE
SEMKO
Status of Certification Rated
Voltage
Standard
No.
Applications
Class
UL1414
UL 60950-1
IEC 60384-14
EN 60384-14
X1, Y2
Y
X1, Y2
Y2
AC250V
(r.m.s.)
Size : 4.5×2.0mm Size : 5.7×2.8mm
and over
Communication
network devices
such as a modem
Size Switching power
supplies
4.5×2.0mm
5.7×2.8mm and over
Part Number Rated Voltage
(V) TC Code
(Standard) Capacitance
(pF) Length L
(mm) Width W
(mm) Thickness T
(mm)
Electrode g
min.
(mm)
Electrode e
(mm)
GA342D1XGF100JY02L AC250 (r.m.s.) SL (JIS) 10 ±5% 4.5 2.0 2.0 2.5 0.3 min.
GA342D1XGF120JY02L AC250 (r.m.s.) SL (JIS) 12 ±5% 4.5 2.0 2.0 2.5 0.3 min.
GA342D1XGF150JY02L AC250 (r.m.s.) SL (JIS) 15 ±5% 4.5 2.0 2.0 2.5 0.3 min.
GA342D1XGF180JY02L AC250 (r.m.s.) SL (JIS) 18 ±5% 4.5 2.0 2.0 2.5 0.3 min.
GA342D1XGF220JY02L AC250 (r.m.s.) SL (JIS) 22 ±5% 4.5 2.0 2.0 2.5 0.3 min.
GA342A1XGF270JW31L AC250 (r.m.s.) SL (JIS) 27 ±5% 4.5 2.0 1.0 2.5 0.3 min.
GA342A1XGF330JW31L AC250 (r.m.s.) SL (JIS) 33 ±5% 4.5 2.0 1.0 2.5 0.3 min.
GA342A1XGF390JW31L AC250 (r.m.s.) SL (JIS) 39 ±5% 4.5 2.0 1.0 2.5 0.3 min.
GA342A1XGF470JW31L AC250 (r.m.s.) SL (JIS) 47 ±5% 4.5 2.0 1.0 2.5 0.3 min.
GA342A1XGF560JW31L AC250 (r.m.s.) SL (JIS) 56 ±5% 4.5 2.0 1.0 2.5 0.3 min.
GA342A1XGF680JW31L AC250 (r.m.s.) SL (JIS) 68 ±5% 4.5 2.0 1.0 2.5 0.3 min.
GA342A1XGF820JW31L AC250 (r.m.s.) SL (JIS) 82 ±5% 4.5 2.0 1.0 2.5 0.3 min.
GA342QR7GF101KW01L AC250 (r.m.s.) X7R (EIA) 100 ±10% 4.5 2.0 1.5 2.5 0.3 min.
GA342QR7GF151KW01L AC250 (r.m.s.) X7R (EIA) 150 ±10% 4.5 2.0 1.5 2.5 0.3 min.
GA342DR7GF221KW02L AC250 (r.m.s.) X7R (EIA) 220 ±10% 4.5 2.0 2.0 2.5 0.3 min.
GA342DR7GF331KW02L AC250 (r.m.s.) X7R (EIA) 330 ±10% 4.5 2.0 2.0 2.5 0.3 min.
GA342QR7GF471KW01L AC250 (r.m.s.) X7R (EIA) 470 ±10% 4.5 2.0 1.5 2.5 0.3 min.
GA352QR7GF471KW01L AC250 (r.m.s.) X7R (EIA) 470 ±10% 5.7 2.8 1.5 4.0 0.3 min.
GA342QR7GF681KW01L AC250 (r.m.s.) X7R (EIA) 680 ±10% 4.5 2.0 1.5 2.5 0.3 min.
GA352QR7GF681KW01L AC250 (r.m.s.) X7R (EIA) 680 ±10% 5.7 2.8 1.5 4.0 0.3 min.
GA342DR7GF102KW02L AC250 (r.m.s.) X7R (EIA) 1000 ±10% 4.5 2.0 2.0 2.5 0.3 min.
GA352QR7GF102KW01L AC250 (r.m.s.) X7R (EIA) 1000 ±10% 5.7 2.8 1.5 4.0 0.3 min.
Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
For General Purpose
GRM/GRJ Series
Only for ApplicationsAC250V Type
GA2 Series
Safety Standard
Certified GA3 Series
Product Information
193
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Part Number Rated Voltage
(V) TC Code
(Standard) Capacitance
(pF) Length L
(mm) Width W
(mm) Thickness T
(mm)
Electrode g
min.
(mm)
Electrode e
(mm)
Continued from the preceding page.
GA352QR7GF152KW01L AC250 (r.m.s.) X7R (EIA) 1500 ±10% 5.7 2.8 1.5 4.0 0.3 min.
GA355QR7GF182KW01L AC250 (r.m.s.) X7R (EIA) 1800 ±10% 5.7 5.0 1.5 4.0 0.3 min.
GA355QR7GF222KW01L AC250 (r.m.s.) X7R (EIA) 2200 ±10% 5.7 5.0 1.5 4.0 0.3 min.
GA355QR7GF332KW01L AC250 (r.m.s.) X7R (EIA) 3300 ±10% 5.7 5.0 1.5 4.0 0.3 min.
GA355DR7GF472KW01L AC250 (r.m.s.) X7R (EIA) 4700 ±10% 5.7 5.0 2.0 4.0 0.3 min.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
For General Purpose
GRM/GRJ Series
Only for ApplicationsAC250V Type
GA2 Series
Safety Standard
Certified GA3 Series
Product Information
194
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Chip Monolithic Ceramic Capacitors
Safety Standard Certified GA3 Series IEC60384-14 Class Y3 Type GD
Features
1. Available for equipment based on IEC/EN60950
and UL1950.
2. Type GD can be used as a Y3-class capacitor.
3. A new monolithic structure for small, high
capacitance capable of operating at high voltage
levels.
4. +125 degree C guaranteed
5. Only for reflow soldering
Applications
1. Ideal for use on line filters and couplings for
DAA modems without transformers
2. Ideal for use on line filters for information
equipment
Do not use these products in any Automotive
Power train or Safety equipment including Battery
chargers for Electric Vehicles and Plug-in Hybrids.
Only Murata products clearly stipulated as
"for Automotive use" can be used for automobile
applications such as Power train and Safety equipment.
Part Number LTW
Dimensions (mm) g min.e min.
2.0 ±0.2
1.0 +0, -0.3
GA342A
GA342D
GA342Q
GA343D
GA343Q
4.5 ±0.3 2.5
0.3
2.0 ±0.2
4.5 ±0.4 3.2 ±0.3 1.5 +0, -0.3
2.0 +0, -0.3
1.5 +0, -0.3
L
T
W
e eg
Standard Certification
UL
SEMKO
Rated VoltageStandard No. Class
UL 60950-1
IEC 60384-14
EN 60384-14 Y3 AC250V(r.m.s.)
Applications Communication
network devices
such as a modem
Size Switching power
supplies
4.5×3.2mm and under Y
Part Number Rated Voltage
(V) TC Code
(Standard) Capacitance
(pF) Length L
(mm) Width W
(mm) Thickness T
(mm)
Electrode g
min.
(mm)
Electrode e
(mm)
GA342D1XGD100JY02L AC250 (r.m.s.) SL (JIS) 10 ±5% 4.5 2.0 2.0 2.5 0.3 min.
GA342D1XGD120JY02L AC250 (r.m.s.) SL (JIS) 12 ±5% 4.5 2.0 2.0 2.5 0.3 min.
GA342D1XGD150JY02L AC250 (r.m.s.) SL (JIS) 15 ±5% 4.5 2.0 2.0 2.5 0.3 min.
GA342D1XGD180JY02L AC250 (r.m.s.) SL (JIS) 18 ±5% 4.5 2.0 2.0 2.5 0.3 min.
GA342D1XGD220JY02L AC250 (r.m.s.) SL (JIS) 22 ±5% 4.5 2.0 2.0 2.5 0.3 min.
GA342A1XGD270JW31L AC250 (r.m.s.) SL (JIS) 27 ±5% 4.5 2.0 1.0 2.5 0.3 min.
GA342A1XGD330JW31L AC250 (r.m.s.) SL (JIS) 33 ±5% 4.5 2.0 1.0 2.5 0.3 min.
GA342A1XGD390JW31L AC250 (r.m.s.) SL (JIS) 39 ±5% 4.5 2.0 1.0 2.5 0.3 min.
GA342A1XGD470JW31L AC250 (r.m.s.) SL (JIS) 47 ±5% 4.5 2.0 1.0 2.5 0.3 min.
GA342A1XGD560JW31L AC250 (r.m.s.) SL (JIS) 56 ±5% 4.5 2.0 1.0 2.5 0.3 min.
GA342A1XGD680JW31L AC250 (r.m.s.) SL (JIS) 68 ±5% 4.5 2.0 1.0 2.5 0.3 min.
GA342A1XGD820JW31L AC250 (r.m.s.) SL (JIS) 82 ±5% 4.5 2.0 1.0 2.5 0.3 min.
GA342QR7GD101KW01L AC250 (r.m.s.) X7R (EIA) 100 ±10% 4.5 2.0 1.5 2.5 0.3 min.
GA342QR7GD151KW01L AC250 (r.m.s.) X7R (EIA) 150 ±10% 4.5 2.0 1.5 2.5 0.3 min.
GA342QR7GD221KW01L AC250 (r.m.s.) X7R (EIA) 220 ±10% 4.5 2.0 1.5 2.5 0.3 min.
GA342QR7GD331KW01L AC250 (r.m.s.) X7R (EIA) 330 ±10% 4.5 2.0 1.5 2.5 0.3 min.
GA342QR7GD471KW01L AC250 (r.m.s.) X7R (EIA) 470 ±10% 4.5 2.0 1.5 2.5 0.3 min.
GA342QR7GD681KW01L AC250 (r.m.s.) X7R (EIA) 680 ±10% 4.5 2.0 1.5 2.5 0.3 min.
GA342QR7GD102KW01L AC250 (r.m.s.) X7R (EIA) 1000 ±10% 4.5 2.0 1.5 2.5 0.3 min.
GA342QR7GD152KW01L AC250 (r.m.s.) X7R (EIA) 1500 ±10% 4.5 2.0 1.5 2.5 0.3 min.
GA343QR7GD182KW01L AC250 (r.m.s.) X7R (EIA) 1800 ±10% 4.5 3.2 1.5 2.5 0.3 min.
GA343QR7GD222KW01L AC250 (r.m.s.) X7R (EIA) 2200 ±10% 4.5 3.2 1.5 2.5 0.3 min.
GA343DR7GD472KW01L AC250 (r.m.s.) X7R (EIA) 4700 ±10% 4.5 3.2 2.0 2.5 0.3 min.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
For General Purpose
GRM/GRJ Series
Only for ApplicationsAC250V Type
GA2 Series
Safety Standard
Certified GA3 Series
Product Information
195
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Chip Monolithic Ceramic Capacitors
Safety Standard Certified GA3 Series IEC60384-14 Class X2 Type GB
Features
1. Type GB can be used as an X2-class capacitor.
2. Chip monolithic ceramic capacitor (certified as
conforming to safety standards) for AC lines.
3. A new monolithic structure for small, high
capacitance capable of operating at high voltage
levels.
4. Compared to lead type capacitors, this new
capacitor is greatly downsized and low-profiled to
1/10 or less in volume, and 1/4 or less in height.
5. +125 degree C guaranteed
6. Only for reflow soldering
Applications
Ideal for use as X capacitor for various switching
power supplies
Do not use these products in any Automotive
Power train or Safety equipment including Battery
chargers for Electric Vehicles and Plug-in Hybrids.
Only Murata products clearly stipulated as
"for Automotive use" can be used for automobile
applications such as Power train and Safety equipment.
Part Number LTW
Dimensions (mm) g min.e min.
1.5 +0,-0.3
GA355D 5.7 ±0.4 3.00.35.0 ±0.4 2.0 +0,-0.3
2.5 +0,-0.3
2.9 +0,-0.4
GA355X
GA355Q
GA355E
L
T
W
e eg
Standard Certification
Standard No. Rated VoltageClass
VDE
SEMKO
ESTI
IEC 60384-14
EN 60384-14 AC250V
(r.m.s.)
X2
Part Number Rated Voltage
(V) TC Code
(Standard) Capacitance
(pF) Length L
(mm) Width W
(mm) Thickness T
(mm)
Electrode g
min.
(mm)
Electrode e
(mm)
GA355QR7GB103KW01L AC250 (r.m.s.) X7R (EIA) 10000 ±10% 5.7 5.0 1.5 3.0 0.3 min.
GA355QR7GB153KW01L AC250 (r.m.s.) X7R (EIA) 15000 ±10% 5.7 5.0 1.5 3.0 0.3 min.
GA355DR7GB223KW01L AC250 (r.m.s.) X7R (EIA) 22000 ±10% 5.7 5.0 2.0 3.0 0.3 min.
GA355ER7GB333KW01L AC250 (r.m.s.) X7R (EIA) 33000 ±10% 5.7 5.0 2.5 3.0 0.3 min.
GA355ER7GB473KW01L AC250 (r.m.s.) X7R (EIA) 47000 ±10% 5.7 5.0 2.5 3.0 0.3 min.
GA355XR7GB563KW06L AC250 (r.m.s.) X7R (EIA) 56000 ±10% 5.7 5.0 2.9 3.0 0.3 min.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Safety Standard Certified Type GC/GD/GF/GB Specifications and Test Methods
Continued on the following page.
*1 "Room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
*2 "C" expresses nominal capacitance value (pF).
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 1.
Then apply 10N force in the direction of the arrow. The soldering
should be done using the reflow method and should be
conducted with care so that the soldering is uniform and free of
defects such as heat shock.
Fig. 1
11 Adhesive Strength
of Termination No removal of the terminations or other defect should occur.
As in Fig., discharge is made 50 times at 5 sec. intervals from
the capacitor (Cd) charged at DC voltage of specified.
Ct: Capacitor under test Cd: 0.001µF
R1: 1,000 R2: 100M R3: Surge resistance
10
Discharge
Test
(Application:
Type GC)
Appearance
No defects or abnormalities
I.R. More than 1,000M
Dielectric
Strength
In accordance with item No.4
The capacitance measurement should be made at each step
specified in the Table.
SL char. :
The capacitance should be measured at even 85D between step
3 and step 4.
#Pretreatment for X7R char.
Perform a heat treatment at 150
W 0
 Y10
D for 60T5 min. and then
let sit for 24T2 hrs. at room condition.*1
9Capacitance
Temperature
Characteristics
Temperature characteristic guarantee is Y55 to W125D
Temperature characteristic guarantee is W20 to W85D
8Dissipation
Factor (D.F.)
Q
The capacitance/Q/D.F. should be measured at a frequency of
1T0.2kHz (SL char.: 1T0.2MHz) and a voltage of
AC1T0.2V (r.m.s.)
7 Capacitance Within the specified tolerance
The insulation resistance should be measured with DC500T50V
and within 60T5 sec. of charging.
6
Insulation Resistance
(I.R.)
More than 6,000M
10 impulses of alternating polarity are subjected.
(5 impulses for each polarity)
The interval between impulses is 60 sec.
Applied Pulse: 1.2/50µs
Applied Voltage: 2.5kVo-p
5Pulse Voltage
(Application: Type
GD/GF)
No self healing breakdowns or flash-overs have taken place in
the capacitor.
No failure should be observed when voltage in the table is
applied between the terminations for 60T1 sec., provided the
charge/discharge current is less than 50mA.
4 Dielectric Strength No defects or abnormalities
Using calipers and micrometers3 Dimensions Within the specified dimensions
Visual inspection2 Appearance No defects or abnormalities
Y1
Operating
Temperature Range
Y55 to W125D
No. Test MethodSpecificationsItem
Test Voltage
DC1075V
AC1500V (r.m.s.)
AC2000V (r.m.s.)
Type GB
Type GC/GD
Type GF
Char. Specification
D.F.V0.025
QU400W20C*2(CF30pF)
QU1000 (CU30pF)
X7R
SL
Char. Capacitance Change
Within T15%X7R
Char. Temperature Coefficient
W350 to Y1000ppm/DSL
Step Temperature (D)
25T2 (20T2 for SL char.)
Min. Operating Temp.T3
25T2 (20T2 for SL char.)
Max. Operating Temp.T2
25T2 (20T2 for SL char.)
1
2
3
4
5
10N, 10T1s
Glass Epoxy Board
R3 R1
R2
Ct
Cd
10kV V
GA3 Series Specifications and Test Methods
196
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General Purpose
GRM/GRJ Series
Only for ApplicationsAC250V Type
GA2 Series
Safety Standard
Certified GA3 Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Safety Standard Certified Type GC/GD/GF/GB Specifications and Test Methods
Continued from the preceding page.
Continued on the following page.
*1 "Room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
*2 "C" expresses nominal capacitance value (pF).
Preheat the capacitor as in table. Immerse the capacitor in
solder solution at 260T5D for 10T1 sec. Let sit at room
condition*1 for 24T2 hrs., then measure.
#Immersing speed: 25T2.5mm/s
#Pretreatment for X7R char.
Perform a heat treatment at 150
W 0
 Y10
D for 60T5 min. and then
let sit for 24T2 hrs. at room condition.*1
*Preheating
15
Resistance
to Soldering
Heat
Appearance
No marking defects
Capacitance
Change
I.R. More than 1,000M
Dielectric
Strength
In accordance with item No.4
Immerse the capacitor in a solution of ethanol (JIS-K-8101) and
rosin (JIS-K-5902) (25% rosin in weight proportion).
Immerse in solder solution for 2T0.5 sec.
Immersing speed: 25T2.5mm/s
Temp. of solder: 245T5°C Lead Free Solder (Sn-3.0Ag-0.5Cu)
235T5°C H60A or H63A Eutectic Solder
14 Solderability of
Termination 75% of the terminations are to be soldered evenly and continuously.
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 2.
Then apply a force in the direction shown in Fig. 3. The soldering
should be done using the reflow method and should be
conducted with care so that the soldering is uniform and free of
defects such as heat shock.
Fig. 3
13 Deflection
No marking defects
Fig. 2
Solder the capacitor to the test jig (glass epoxy board).
The capacitor should be subjected to a simple harmonic motion
having a total amplitude of 1.5mm, the frequency being varied
uniformly between the approximate limits of 10 and 55Hz. The
frequency range, from 10 to 55Hz and return to 10Hz, should be
traversed in approximately 1 min. This motion should be applied
for a period of 2 hrs. in each of 3 mutually perpendicular
directions (total of 6 hrs.).12
Vibration
Resistance
Appearance
No defects or abnormalities
Capacitance
Within the specified tolerance
D.F.
Q
No. Test MethodSpecificationsItem
Char. Specification
D.F.V0.025
QU400W20C*2(CF30pF)
QU1000 (CU30pF)
X7R
SL
LZW
(mm) a Dimension (mm)
3.5
3.5
4.5
4.5
b
7.0
7.0
8.0
8.0
c
2.4
3.7
3.2
5.6
d
1.0
4.5Z2.0
4.5Z3.2
5.7Z2.8
5.7Z5.0
Char. Capacitance Change
Within T10%
Within T2.5% or T0.25pF
(Whichever is larger)
X7R
SL
Step Temperature
100 to 120D
170 to 200D
Time
1 min.
1 min.
1
2
Solder resist
Cu
Glass Epoxy Board
S
^_
¤
¯°
[_`¬°±
b
,
QRTU
YZ]^_`
¢£¥¦
ª«®¯°±
SVWXZ[\_¤§¨©«¬°
UYZ¦ª«
UVZ¦§«
a
c
T
_`
¥
°±
RSW£¤¨
100
40
φ4.5
t : 1.6
d
Capacitance meter
Flexure=1
20 50
R230
45 45 (in mm)
Pressurizing
speed: 1.0mm/s
Pressurize
GA3 Series Specifications and Test Methods
197
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General Purpose
GRM/GRJ Series
Only for ApplicationsAC250V Type
GA2 Series
Safety Standard
Certified GA3 Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Safety Standard Certified Type GC/GD/GF/GB Specifications and Test Methods
Continued from the preceding page.
Continued on the following page.
*1 "Room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
*2 "C" expresses nominal capacitance value (pF).
Before this test, the test shown in the following is performed.
·Item 11 Adhesive Strength of Termination (apply force is 5N)
·Item 13 Deflection
Impulse Voltage
Each individual capacitor should
be subjected to a 2.5kV (Type
GC/GF: 5kV) Impulse (the
voltage value means zero to
peak) for three times. Then the
capacitors are applied to life test.
Apply voltage as in Table for 1,000 hrs. at 125
W2
 Y0
D, relative
humidity 50% max.
Let sit for 24T2 hrs. at room condition,*1 then measure.
#Pretreatment for X7R char.
Perform a heat treatment at 150
W 0
Y10
D for 60T5 min. and then
let sit for 24T2 hrs. at room condition.*1
18 Life
Appearance
No marking defects
Capacitance
Change
D.F.
Q
I.R. More than 3,000M
Dielectric
Strength
In accordance with item No.4
Char. Capacitance Change
Within T20%
Within T3.0% or T0.3pF
(Whichever is larger)
X7R
SL
Char. Specification
D.F.V0.05
QU275W5/2C*2 (CF30pF)
QU350 (CU30pF)
X7R
SL
Before this test, the test shown in the following is performed.
·Item 11 Adhesive Strength of Termination (applied force is 5N)
·Item 13 Deflection
Let the capacitor sit at 40T2D and relative humidity of 90 to 95%
for 500
W24
Y 0
hrs.
Remove and let sit for 24T2 hrs. at room condition,*1 then
measure.
#Pretreatment for X7R char.
Perform a heat treatment at 150
W 0
Y10
D for 60T5 min. and then
let sit for 24T2 hrs. at room condition.*1
17
Humidity
(Steady
State)
Appearance
No marking defects
Capacitance
Change
D.F.
Q
I.R. More than 3,000M
Dielectric
Strength
In accordance with item No.4
Char. Capacitance Change
Within T15%
Within T5.0% or T0.5pF
(Whichever is larger)
X7R
SL
Char. Specification
D.F.V0.05
QU275W5/2C*2(CF30pF)
QU350 (CU30pF)
X7R
SL
Fix the capacitor to the supporting jig (glass epoxy board) shown
in Fig. 4.
Perform the 5 cycles according to the 4 heat treatments listed in
the following table.
Let sit for 24T2 hrs. at room condition,*1 then measure.
#Pretreatment for X7R char.
Perform a heat treatment at 150
W 0
Y10
D for 60T5 min. and then
let sit for 24T2 hrs. at room condition.*1
Fig. 4
16
Temperature
Cycle
Appearance
No marking defects
Capacitance
Change
D.F.
Q
I.R. More than 3,000M
Dielectric
Strength
In accordance with item No.4
Char. Capacitance Change
Within T15%
Within T2.5% or T0.25pF
(Whichever is larger)
X7R
SL
Char. Specification
D.F.V0.05
QU400W20C*2(CF30pF)
QU1000 (CU30pF)
X7R
SL
No. Test MethodSpecificationsItem
Step Temperature (D)
Min. Operating Temp.T3
Room Temp.
Max. Operating Temp.T2
Room Temp.
Time (min.)
30T3
2 to 3
30T3
2 to 3
1
2
3
4
Type Applied Voltage
AC312.5V (r.m.s.), except that once each hour the
voltage is increased to AC1,000V (r.m.s.) for 0.1 sec.
AC425V (r.m.s.), except that once each hour the
voltage is increased to AC1,000V (r.m.s.) for 0.1 sec.
GB
GC
GF
GD
Solder resist
Cu
Glass Epoxy Board
Front time (T1)
=
1.2µs=1.67T
Time to half-value (T2)
=
50µs
Tt
T2
T1
0
30
50
90(%)
100
GA3 Series Specifications and Test Methods
198
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General Purpose
GRM/GRJ Series
Only for ApplicationsAC250V Type
GA2 Series
Safety Standard
Certified GA3 Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Safety Standard Certified Type GC/GD/GF/GB Specifications and Test Methods
Continued from the preceding page.
*1 "Room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
*2 "C" expresses nominal capacitance value (pF).
The capacitor under test should be held in the flame in the
position which best promotes burning. Each specimen should
be exposed to the flame only once. Time of exposure to flame:
30 sec. Length of flame : 12T1mm
Gas burner : Length 35mm min.
Inside Dia. 0.5T0.1mm
Outside Dia. 0.9mm max.
Gas : Butane gas Purity 95% min.
21 Passive
Flammability The burning time should not exceed 30 sec.
The tissue paper should not ignite.
The capacitor should be individually wrapped in at least one but
not more than two complete layers of cheesecloth. The
capacitor should be subjected to 20 discharges. The interval
between successive discharges should be 5 sec. The UAC
should be maintained for 2 min. after the last discharge.
C1,2 : 1µFT10% C3: 0.033µFT5% 10kV
L1 to 4 : 1.5mHT20% 16A Rod core choke
Ct: 3µFT5% 10kV R : 100T2%
Cx: Capacitor under test UAC : URT5%
F : Fuse, Rated 16A UR: Rated Voltage
Ut: Voltage applied to Ct
20 Active
Flammability The cheesecloth should not be on fire.
Before this test, the test shown in the following is performed.
·Item 11 Adhesive Strength of Termination (apply force is 5N)
·Item 13 Deflection
Apply the rated voltage at 40T2D and relative humidity of 90 to
95% for 500
W24
Y 0
hrs. Remove and let sit for 24T2 hrs. at room
condition,*1 then measure.
#Pretreatment for X7R char.
Perform a heat treatment at 150
W 0
Y10
D for 60T5 min. and then
let sit for 24T2 hrs. at room condition.*1
19
Humidity
Loading
Appearance
No marking defects
Capacitance
Change
D.F.
Q
I.R. More than 3,000M
Dielectric
Strength
In accordance with item No.4
No. Test MethodSpecificationsItem
Char. Capacitance Change
Within T15%
Within T5.0% or T0.5pF
(Whichever is larger)
X7R
SL
Char. Specification
D.F.V0.05
QU275W5/2C*2 (CF30pF)
QU350 (CU30pF)
X7R
SL
Type Ui
2.5kV
5kV
GD, GB
GC, GF
Ut
CtCxC3C2
L1
L3
L2R
L4
C1
S2
Tr
S1
UAC
F
Oscilloscope
Ux
Ui
time
About 8mm
200T5mm
Test Specimen
Tissue
About 10mm Thick Board
45°
GA3 Series Specifications and Test Methods
199
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General Purpose
GRM/GRJ Series
Only for ApplicationsAC250V Type
GA2 Series
Safety Standard
Certified GA3 Series
Product Information
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
GRM/GRJ/GR4/GR7/GA2/GA3 Series Reference Data (Typical Example)
200
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Capacitance - Temperature Characteristics
C0G/U2J/SL Characteristics
Cap. Change (%)
Temperature (°C)
20
0
5
10
60 40 20 0 20 40 60 80 100 120 140
15
10
5
15
20
C0G
C0G
SL
SL
U2J
U2J
X7R Characteristics
-30
-20
-10
0
10
20
30
-60 -40 -20 0 20 40 60 80 100 120 140
Temperature (°C)
Cap. Change (%)
X7R Char. Spec.(upper)
X7R Char. Spec.(lower)
GR4 Series
Cap. Change (%)
Temperature (°C)
–20
0
5
10
–60 –40 –20 0 20 40 60 80 100 120 140
–15
–10
-5
15
20
Impedance - Frequency Characteristics
GRM Series (C0G Char. 250V)
10k
1k
10
100
1
100m
1M 10M 100M 10G1G
Frequency (Hz)
Z ()
10pF
100pF
47pF
22pF
GRM Series (C0G Char. 630V)
10k
100k
1k
10
100
1
100m
1M 10M 100M 10G1G
Frequency (Hz)
Z ()
100pF
1000pF
470pF 47pF 10pF
Continued on the following page.
GRM Series (C0G Char. 1kV)
100m
1
10
100
1k
10k
10pF
47pF
100pF
22pF
100k
1M 10M 100M 1G 10G
Frequency (Hz)
Z ()
GRM Series (X7R Char. 250V)
1k
100
10
1
100m
10m
1M 10M 100M 1G
Frequency (Hz)
Z ()
1000pF
10000pF
100000pF
For General Purpose
GRM/GRJ Series
Only for ApplicationsAC250V Type
GA2 Series
Safety Standard
Certified GA3 Series
Product Information
Reference Data
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
GRM/GRJ/GR4/GR7/GA2/GA3 Series Reference Data (Typical Example)
201
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
Impedance - Frequency Characteristics
GRM Series (X7R Char. 630V)
1k
100
10
1
100m
10m
1M 10M 100M 1G
Frequency (Hz)
Z ()
1000pF
10000pF
100000pF
GRJ Series (X7R Char. 250V)
0.01
0.1
1
10
100
1M 10M 100M 1G
Frequency (Hz)
(1) GRJ21AR72E102KWJ1D
(2) GRJ21BR72E103KWJ3L
(3) GRJ31BR72E223KWJ1L
(4) GRJ31CR72E473KWJ3L
(5) GRJ31CR72E104KWJ3L
(6) GRJ55DR72E105KWJ1L
Z ()
(3)
(4)
(5)
(6)
(2)
(1)
GRJ Series (X7R Char. 630V)
(1) GRJ31BR72J102KWJ1L
(2) GRJ31BR72J222KWJ1L
(3) GRJ31BR72J472KWJ1L
(4) GRJ31BR72J103KWJ1L
(5) GRJ32QR72J223KWJ1L
(6) GRJ32DR72J473KWJ1L
(7) GRJ43DR72J104KWJ1L
(8) GRJ55DR72J224KWJ1L
0.01
0.1
1
10
100
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
1M 10M 100M 1G
Frequency (Hz)
Z ()
GR4 Series
1k
100
10
1
100m
10m
1M 10M 100M 1G
Frequency (Hz)
Z ()
100pF
1000pF
4700pF
Continued on the following page.
GA2 Series
Z ()
Frequency (Hz)
10m
10
1M 10M 100M 1G
1
100
1k
100m
10000pF
1000pF
100000pF
GA3 Series (Type GF)
1K
100
10
1
100m
10m
1M 10M 100M 1G
Frequency (Hz)
Z ()
1000pF
2200pF
GA3 Series (Type GD)
1K
100
10
1
100m
10m
1M 10M 100M 1G
Frequency (Hz)
Z ()
150pF
1000pF
2200pF
GA3 Series (Type GB)
0.01
0.1
1
10
100
1M 10M 100M 1G
Frequency (Hz)
Z ()
33000pF
10000pF
56000pF
For General Purpose
GRM/GRJ Series
Only for ApplicationsAC250V Type
GA2 Series
Safety Standard
Certified GA3 Series
Product Information
Reference Data
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
GRM/GRJ/GR4/GR7/GA2/GA3 Series Reference Data (Typical Example)
202
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
Capacitance - AC Voltage Characteristics
GA3 Series (Type GF/GD, X7R Char.)
-60
-40
-20
0
20
40
60
0 100 200 300 400 500
AC Voltage [V(r.m.s.)]
Cap. Change (%)
at Room Condition (25°C)
GA3 Series (Type GB)
at Room Condition (25°C)
-60
-40
-20
0
20
40
60
0 200 400 600 800 1000
AC Voltage [V(r.m.s.)]
Cap. Change (%)
10000pF
33000pF
56000pF
Capacitance - DC Bias Characteristics
GR7 Series
GR721AW0BB103KW01D
GR721AW0BB153KW01D
GR721BW0BB223KW03L
GR731AW0BB223KW01D
GR721BW0BB273KW03L
GR731AW0BB273KW01D
GR731AW0BB333KW01D
GR731AW0BB103KW01D
GR731AW0BB153KW01D
GR731BW0BB223KW01L
GR731BW0BB333KW01L
GR731CW0BB473KW03L
-100
-80
-60
-40
-20
0
20
0 50 100 150 200 250 300 350
DC Bi as (V)
(1)
(2)
(2)
(1)
Cap. Change (%)
For General Purpose
GRM/GRJ Series
Only for ApplicationsAC250V Type
GA2 Series
Safety Standard
Certified GA3 Series
Product Information
Reference Data
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Taping is the standard packaging method.
Part Number Dimensions (mm)
WT
ø180mm Reel
Paper Tape Embossed Tape
L
Quantity (pcs.)
Medium
Voltage
AC250V
Safety Std.
Certification
GRM18
GRJ21/GRM21/GR721
GRJ31/GRM31/GR731
GRJ32/GRM32
GRM42/GR442
GRJ43/GRM43/GR443
GRJ55/GRM55/GR455
GA242
GA243
GA255
GA342
GA343
GA352
GA355
1.6
2.0
3.2
3.2
4.5
4.5
5.7
4.5
4.5
5.7
4.5
4.5
5.7
5.7
0.8
1.25
1.6
2.5
2.0
3.2
5.0
2.0
3.2
5.0
2.0
3.2
2.8
5.0
0.8
1.0
1.25
1.0
1.25
1.6
1.0
1.25
1.5
2.0
1.0
1.5
1.5
2.0
2.5
2.0
1.5
1.5
2.0
2.0
1.0
1.5
2.0
1.5
2.0
1.5
1.5
2.0
2.5
2.7
2.9
4,000
4,000
-
4,000
-
-
4,000
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
3,000
-
3,000
2,000
-
3,000
2,000
1,000
3,000
2,000
1,000
1,000
500
1,000
2,000
1,000
1,000
1,000
3,000
2,000
2,000
1,000
1,000
1,000
1,000
1,000
500
500
500
c Minimum Quantity Guide
c Tape Carrier Packaging
(1) Appearance of Taping
qEmbossed Tape wPaper Tape
Top Tape: 0.05mm in thickness
Sprocket Hole: As specified in (2)
Cavity for Chip: As specified in (2)
Base Tape: As specified in (2)
Bottom Tape: 0.05mm in thickness
ChipPacked Chips
Cover Tape: 0.06mm in thickness
Sprocket Hole: As specified in (2)
Cavity for Chip: As specified in (2)
Base Tape: As specified in (2)
ChipPacked Chips
Continued on the following page.
Package
203
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General Purpose
GRM/GRJ Series
Only for ApplicationsAC250V Type
GA2 Series
Safety Standard
Certified GA3 Series
Product Information
Package
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
(2) Dimensions of Tape
q Embossed Tape
w Paper Tape (3) Dimensions of Reel
8mm width, 4mm pitch Tape
8mm width, 4mm pitch Tape
12mm width, 8mm/4mm pitch Tape
A*Part Number A*Part NumberB*
GRJ21/GRM21/GR721
(TU1.25mm) 1.45 2.25
GRJ31/GRM31/GR731
(TU1.25mm) 2.0 3.6
GRJ32/GRM32
(TU1.25mm) 2.9 3.6
B*
2.5 5.1
3.6 4.9
3.2 6.1
GRM42/GR442/GA242/GA342
GRJ43/GRM43/GR443/GA243/GA343
GA352
GRJ55/GRM55/GR455/GA255/GA355 5.4
*1 4.0±0.1mm in case of GRM42/GR442/GA242/GA342
6.1
*Nominal Value
*Nominal Value
A*Part Number B*
GRJ21/GRM21/GR721
(T=1.0mm) 1.45 2.25
GRM18 1.05 1.85
GRM31/GR731
(T=1.0mm) 2.0 3.6
GRM32
(T=1.0mm) 2.9 3.6
*Nominal Value
(in mm)
(in mm)
(in mm)
4.0T0.1
4.0T0.05
1.75T0.1
8.0T0.3
Direction of Feed
A
B
2.0T0.05 0.25T0.1
2.5 max.
3.5T0.05
ø1.5W0.1
Y08.0T0.1*1
4.0
T
0.1 1.75
T
0.1
12.0T0.3
Direction of Feed
5.5T0.05
2.0T0.05 0.3T0.1
3.7 max.
B
A
ø1.5W0.1
Y0
4.0T0.1 ø1.5W0.1
Y0
4.0T0.1
1.75T0.1 1.1 max.
8.0T0.3
Direction of Feed
A
B
3.5T0.05
2.0T0.05
2.0T0.5
9.0 (Tape width 8mm)
13.0 (Tape width 12mm)
ø13T0.2
ø21T0.8
60 +1
-
0
-
1.5
180+0
-
0
+1.0
-
0
+1.0
Continued from the preceding page.
Continued on the following page.
13.0T1.0 (Tape width 8mm)
17.0T1.0 (Tape width 12mm)
Package
204
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General Purpose
GRM/GRJ Series
Only for ApplicationsAC250V Type
GA2 Series
Safety Standard
Certified GA3 Series
Product Information
Package
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
(4) Taping Method
q Tapes for capacitors are wound clockwise. The
sprocket holes are to the right as the tape is pulled
toward the user.
w Part of the leader and part of the empty tape should be
attached to the end of the tape as shown at right.
e The top tape or cover tape and base tape are not
attached at the end of the tape for a minimum of 5
pitches.
r Missing capacitors number within 0.1% of the number
per reel or 1 pc, whichever is greater, and are not
continuous.
t The top tape or cover tape and bottom tape should not
protrude beyond the edges of the tape and should not
cover sprocket holes.
y Cumulative tolerance of sprocket holes, 10 pitches:
T0.3mm.
u Peeling off force: 0.1 to 0.6N in the direction shown at
right.
(in mm)
165 to 180°
Base Tape
Top Tape or Cover Tape
Direction of feed
160 min. 190 min.
(Top Tape or Cover Tape alone)
Vacant section Chip mounting unit Vacant section
210 min.
Continued from the preceding page.
Package
205
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General Purpose
GRM/GRJ Series
Only for ApplicationsAC250V Type
GA2 Series
Safety Standard
Certified GA3 Series
Product Information
Package
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
!Caution
206
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Storage and Operating Conditions
Handling
1. Vibration and impact
Do not expose a capacitor to excessive shock or
vibration during use.
2. Do not directly touch the chip capacitor, especially
the ceramic body. Residue from hands/fingers may
create a short circuit environment.
FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY
RESULT, WORST CASE, IN A SHORT CIRCUIT
AND CAUSE FUMING OR PARTIAL DISPERSION
WHEN THE PRODUCT IS USED.
Operating and storage environment
Do not use or store capacitors in a corrosive
atmosphere, especially where chloride gas, sulfide
gas, acid, alkali, salt or the like are present. In
addition, avoid exposure to moisture. Before cleaning,
bonding or molding this product, verify that these
processes do not affect product quality by testing the
performance of a cleaned, bonded or molded product
in the intended equipment. Store the capacitors
where the temperature and relative humidity do not
exceed 5 to 40 degrees centigrade and 20 to 70%.
Use capacitors within 6 months of delivery.
Check the solderability after 6 months or more.
FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY
RESULT, WORST CASE, IN A SHORT CIRCUIT
AND CAUSE FUMING OR PARTIAL DISPERSION
WHEN THE PRODUCT IS USED.
For General Purpose
GRM/GRJ Series
Only for ApplicationsAC250V Type
GA2 Series
Safety Standard
Certified GA3 Series
Product Information
!Caution
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
When DC-rated capacitors are to be used in AC or ripple
current circuits, be sure to maintain the Vp-p value of the
applied voltage or the Vo-p which contains DC bias within
the rated voltage range.
When the voltage is applied to the circuit, starting or
stopping may generate irregular voltage for a transit
period because of resonance or switching. Be sure to use
a capacitor with a rated voltage range that includes these
irregular voltages.
When DC-rated capacitors are to be used in input circuits
from a commercial power source (AC filter), be sure to
use Safety Certified Capacitors because various
regulations for withstanding voltage or impulses,
established for all equipment, should be taken into
consideration.
Voltage
Positional
Measurement
DC Voltage DC+AC Voltage AC Voltage Pulse Voltage (1) Pulse Voltage (2)
V0-p V0-p Vp-p Vp-p Vp-p
1. Operating Voltage
2. Operating Temperature, Self-generated Heat, and
Load Reduction at High-frequency Voltage Condition
Continued on the following page.
Keep the surface temperature of a capacitor below the
upper limit of its rated operating temperature range.
Be sure to take into account the heat generated by the
capacitor itself. When the capacitor is used in a high-
frequency voltage, pulse voltage, it may self-generate
heat due to dielectric loss.
Applied voltage should be the load such as self-
generated heat is within 20°C on the condition of
atmosphere temperature 25°C. When measuring, use a
thermocouple of small thermal capacity -K of ø0.1mm
in conditions where the capacitor is not affected by
radiant heat from other components or surrounding
ambient fluctuations. Excessive heat may lead to
deterioration of the capacitor's characteristics and
reliability. (Never attempt to perform measurement
with the cooling fan running. Otherwise, accurate
measurement cannot be ensured.)
(1) In the case of X7R char.
Caution (Rating)
!Caution
207
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General Purpose
GRM/GRJ Series
Only for ApplicationsAC250V Type
GA2 Series
Safety Standard
Certified GA3 Series
Product Information
!Caution
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Due to the low self-heating characteristics of low-
dissipation capacitors, the allowable electric power of
these capacitors is generally much higher than that of
X7R characteristic capacitors.
When a high frequency voltage that causes 20°C self-
heating to the capacitor is applied, it will exceed the
capacitor's allowable electric power.
The frequency of the applied sine wave voltage should be
less than 500kHz (less than 100kHz in the case of rated
voltage: DC3.15kV). The applied voltage should be less
than the value shown in figure below.
In the case of non-sine wave that includes a harmonic
frequency, please contact our sales representatives or
product engineers. Excessive heat may lead to
deterioration of the capacitor's characteristics and
reliability. (Never attempt to perform measurement with
the cooling fan running. Otherwise, accurate
measurement cannot be ensured.)
<C0G char., Rated Voltage: DC3.15kV>
The capacitors less than 22pF can be applied maximum
4.0kV peak to peak at 100kHz or less only for the ballast
or the resonance usage in the LCD backlight inverter
circuit.
<Capacitor Selection Tool>
We are also offering free software/the capacitor selection
tool: "Murata Medium Voltage Capacitors Selection Tool
by Voltage Form," which will assist you in selecting a
suitable capacitor.
The software can be downloaded from Murata's Website.
(http://www.murata.com/designlib/mmcsv/index.html).
By inputting capacitance values and the applied voltage
waveform of the specific capacitor series, this software
will calculate the capacitor's power consumption and list
suitable capacitors (non-sine wave is also available).
(2) In case of C0G, U2J char.
C0G char., Rated Voltage: DC1kV
Frequency [kHz] 1000100101
100
(1000)
Allowable voltage [Vp-p]
10000
C0G char., Rated Voltage: DC3.15kV
Frequency [kHz] 1000100101
1000
(3150)
Allowable voltage [Vp-p]
10000
27 to 47pF
to 22pF
Continued from the preceding page.
The sine-wave frequency VS allowable voltage
The temperature of the surface
of capacitor: 125˚ C or less (including self-heating)
U2J char., Rated Voltage: DC3.15kV
Frequency [kHz]
Allowable voltage [Vp-p]
1000100101
1000
(3150)
10000
U2J char., Rated Voltage: DC630V
Frequency [kHz] 1000(500)100101
100
(630)
Allowable voltage [Vp-p]
1000 to 680pF
1,000pF
to 33pF
47pF
100pF
100
1000
10000
to 470pF
U2J char., Rated Voltage: DC1kV
Allowable voltage [Vp-p]
Frequency [kHz] 1000(500)100101 100
1000
10000
U2J char., Rated Voltage: DC2kV
Allowable voltage [Vp-p]
Frequency [kHz] 1000(500)100101
to 100pF
150pF
220pF
2,200pF
U2J char., Rated Voltage: DC250V
Frequency [kHz] 1000(500)100101
100
(250)
Allowable voltage [Vp-p]
1000
to 4,700pF
10,000pF
Continued on the following page.
C0G char., Rated Voltage: DC250V
Frequency [kHz]
100
(250)
Allowable voltage [Vp-p]
1000 C0G char., Rated Voltage: DC630V
Frequency [kHz] 1000100101
100
(630)
Allowable voltage [Vp-p]
1000
1000100101
to 470pF
1000pF
680pF
560pF
820pF
to 100pF
to 100pF
!Caution
208
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General Purpose
GRM/GRJ Series
Only for ApplicationsAC250V Type
GA2 Series
Safety Standard
Certified GA3 Series
Product Information
!Caution
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Tests for AC withstanding voltage should be made with
equipment capable of creating a wave similar to a
50/60 Hz sine wave.
If the distorted sine wave or overload exceeding the
specified voltage value is applied, a defect may be
caused.
4. Test Condition for AC Withstanding Voltage
(1) Test Equipment
The capacitor's leads or terminals should be firmly
connected to the output of the withstanding voltage test
equipment, and then the voltage should be raised from
near zero to the test voltage. If the test voltage is applied
directly to the capacitor without raising it from near zero,
it should be applied with the zero cross.* At the end of the
test time, the test voltage should be reduced to near zero,
and then the capacitor's leads or terminals should be
taken off the output of the withstanding voltage test
equipment. If the test voltage is applied directly to the
capacitor without raising it from near zero, surge voltage
may occur and cause a defect.
*ZERO CROSS is the point where voltage sine wave
passes 0V.
- See the figure at right -
(2) Voltage Applied Method
0V
zero cross
Voltage sine wave
Continued from the preceding page.
Failure of a capacitor may result in a short circuit. Be sure
to provide an appropriate fail-safe function such as a fuse
on your product to help eliminate possible electric shock,
fire, or fumes.
Please consider using fuses on each AC line if the
capacitors are used between the AC input lines and earth
(line bypass capacitors), to prepare for the worst case,
such as a short circuit.
FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY
RESULT, WORST CASE, IN A SHORT CIRCUIT AND
CAUSE FUMING OR PARTIAL DISPERSION WHEN THE
PRODUCT IS USED.
3. Fail-safe
AC IN
FUSE
!Caution
209
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General Purpose
GRM/GRJ Series
Only for ApplicationsAC250V Type
GA2 Series
Safety Standard
Certified GA3 Series
Product Information
!Caution
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
[Chip Mounting Close to Board Separation Point]
A
B
D
C
Perforation
Slit
Locate chip
horizontal to the
direction in which
stress acts.
Chip arrangement
Worst AGCGB~D Best
[Component Direction]
Caution (Soldering and Mounting)
1. Vibration and Impact
Do not expose a capacitor to excessive shock or vibration
during use.
2. Circuit Board Material
It is possible for the chip to crack by the expansion and
shrinkage of a metal board.
Please contact us if you want to use our ceramic
capacitors on a metal board such as Aluminum.
3. Land Layout for Cropping PC Board
Choose a mounting position that minimizes the stress imposed on the chip during flexing or bending of the board.
Continued on the following page.
<Example
to be avoided> <Example
of improvement>
!Caution
210
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General Purpose
GRM/GRJ Series
Only for ApplicationsAC250V Type
GA2 Series
Safety Standard
Certified GA3 Series
Product Information
!Caution
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
,,,
,,,
,,,









4. Reflow Soldering
When components are exposed to sudden heat, their
mechanical strength can be decreased due to the
extreme temperature changes which can cause flexing
and result in internal mechanical damage, which will
cause the parts to fail. In order to prevent mechanical
damage, preheating is required for both the components
and the PCB board. Preheating conditions are shown in
Table 1. It is required to keep the temperature differential
between the soldering and the components surface (T)
as small as possible.
Solderability of Tin plating termination chips might be
deteriorated when low temperature soldering profile
where peak solder temperature is below the Tin melting
point is used. Please confirm the solderability of Tin
plating termination chips before use.
When components are immersed in solvent after
mounting, be sure to maintain the temperature difference
(T) between the component and solvent within the
range shown in the Table 1.
G--18/21/31
G--32/42/43/52/55
TV190D
TV130D
Part Number Temperature Differential
Table 1
Recommended Conditions
[Standard Conditions for Reflow Soldering]
[Allowable Soldering Temperature and Time]
In the case of repeated soldering, the accumulated
soldering time must be within the range shown above.
,,,
,,,
,,,







Soldering Time (sec.)
260
270
250
240
230
0306090
Soldering Temperature (D)
Inverting the PCB
Make sure not to impose an abnormal mechanical shock on
the PCB.
Continued from the preceding page.
Peak Temperature
Atmosphere
Pb-Sn Solder
Infrared Reflow
230-250°C
Air
Vapor Reflow
230-240°C
Air
Lead Free Solder
240-260°C
Air or N2
Infrared Reflow
Vapor Reflow
60-120 seconds 30-60 seconds
,,,
,,,
,,,







T
Gradual
Cooling
Soldering
Preheating
200°C
170°C
150°C
130°C
Time
Temperature (D)
Peak Temperature
60-120 seconds 20 seconds max.
T
Gradual
Cooling
Soldering
Preheating
170°C
150°C
130°C
Time
Temperature (D)
Peak Temperature
Pb-Sn Solder: Sn-37Pb
Lead Free Solder: Sn-3.0Ag-0.5Cu
Continued on the following page.
Optimum Solder Amount for Reflow Soldering
Overly thick application of solder paste results in
excessive solder fillet height.
This makes the chip more susceptible to mechanical and
thermal stress on the board and may cause cracked
chips.
Too little solder paste results in a lack of adhesive
strength on the outer electrode, which may result in chips
breaking loose from the PCB.
Make sure the solder has been applied smoothly to the
end surface to a height of 0.2mm min.
[Optimum Solder Amount for Reflow Soldering]
0.2mm min.
in section
!Caution
211
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General Purpose
GRM/GRJ Series
Only for ApplicationsAC250V Type
GA2 Series
Safety Standard
Certified GA3 Series
Product Information
!Caution
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
The top of the solder fillet should be lower than the
thickness of components. If the solder amount is
excessively large, the risk of cracking is higher during
board bending or under any other stressful conditions.
Continued from the preceding page.
Optimum Solder Amount for Flow Soldering
5. Flow Soldering
When components are exposed to sudden heat, their
mechanical strength can be decreased due to the
extreme temperature changes which can cause flexing
and result in internal mechanical damage, which will
cause the parts to fail. Additionally, an excessively long
soldering time or high soldering temperature results in
leaching by the outer electrodes, causing poor adhesion
or a reduction in capacitance value due to loss of contact
between electrodes and end termination.
In order to prevent mechanical damage, preheating is
required for both the components and the PCB board.
Preheating conditions are shown in Table 2. It is required
to keep temperature differential between the soldering
and the components surface (T) as small as possible.
When components are immersed in solvent after
mounting, be sure to maintain the temperature difference
between the component and solvent within the range
shown in Table 2.
Do not apply flow soldering to chips not listed in Table 2.
G--18/21/31 TV150D
Part Number Temperature Differential
Table 2
[Standard Conditions for Flow Soldering]
[Allowable Soldering Temperature and Time]
In the case of repeated soldering, the accumulated
soldering time must be within the range shown above.
,,,
,,,
,,,







Soldering Time (sec.)
260
270
250
240
230
0102030
Soldering Temperature (D)
Up to Chip Thickness
Adhesive
Recommended Conditions
Peak Temperature
Atmosphere
Pb-Sn Solder
240-250°C
Air
Lead Free Solder
250-260°C
N2
60-120 seconds 5 seconds max.
T
Gradual
Cooling
Soldering
Preheating
170°C
150°C
130°C
Time
Temperature (D)
Peak Temperature
,,,
,,,
,,,









Pb-Sn Solder: Sn-37Pb
Lead Free Solder: Sn-3.0Ag-0.5Cu
Continued on the following page.
in section
!Caution
212
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General Purpose
GRM/GRJ Series
Only for ApplicationsAC250V Type
GA2 Series
Safety Standard
Certified GA3 Series
Product Information
!Caution
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
Optimum Solder Amount when re-working Using a
Soldering Iron
Solder Amount
6. Correction with a Soldering Iron
When sudden heat is applied to the components by use
of a soldering iron, the mechanical strength of the
components will decrease because the extreme
temperature change causes deformations inside the
components.
In order to prevent mechanical damage to the
components, preheating is required for both the
components and the PCB board.
Preheating conditions, (The "Temperature of the
Soldering Iron Tip", "Preheating Temperature,"
"Temperature Differential" between iron tip and the
components and the PCB), should be within the
conditions of table 3.
It is required to keep the temperature differential between
the soldering Iron and the component's surface (T) as
small as possible.
After soldering, do not allow the component/PCB to cool
down rapidly.
The operating time for the re-working should be as short
as possible. When re-working time is too long, it may
cause solder leaching, in turn causing a reduction of the
adhesive strength of the terminations.
G--18/21/31
G--32/42/43/
52/55
TV190D
TV130D
Part Number
Temperature
Differential
(T)
Table 3
Continued from the preceding page.
7. Washing
Excessive output of ultrasonic oscillation during cleaning
causes PCBs to resonate, resulting in cracked chips or
broken solder. Take note not to vibrate PCBs.
FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY
RESULT, WORST CASE, IN A SHORT CIRCUIT AND
FUMING WHEN THE PRODUCT IS USED.
air
air
Atmosphere
150°C min.
150°C min.
Preheating
Temperature
350°C max.
280°C max.
Temperature
of Soldering
Iron tip
*Applicable for both Pb-Sn and Lead Free Solder.
Pb-Sn Solder: Sn-37Pb
Lead Free Solder: Sn-3.0Ag-0.5Cu
For sizes smaller than Gpp18, the top of the solder fillet
should be lower than 2/3 of the thickness of the
component or 0.5mm whichever is smaller.
For sizes larger than Gpp21, the top of the solder fillet
should be lower than 2/3 of the thickness of the
component.
If the solder amount is excessive, the risk of cracking is
higher during board bending or under any other stressful
conditions.
A Soldering iron ø3mm or smaller should be used.
It is also necessary to keep the soldering iron from
touching the components during the re-work.
Solder wire with ø0.5mm or smaller is required for
soldering.
in section
!Caution
213
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General Purpose
GRM/GRJ Series
Only for ApplicationsAC250V Type
GA2 Series
Safety Standard
Certified GA3 Series
Product Information
!Caution
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
1. Construction of Board Pattern
After installing chips, if solder is excessively applied to
the circuit board, mechanical stress will cause destruction
resistance characteristics to lower. To prevent this, be
extremely careful in determining shape and dimension
before designing the circuit board diagram.
Construction and Dimensions of Pattern (Example)
Flow soldering : 3.2g1.6 or less available.
LgWa b c
2.0g1.25 1.0-1.2 0.9-1.0 0.8-1.1
1.6g0.8 0.6-1.0 0.8-0.9 0.6-0.8
2.2-2.6 1.0-1.1 1.0-1.43.2g1.6
Flow Soldering
LgWa b c
2.0g1.25 1.0-1.2 0.6-0.7 0.8-1.1
2.2-2.4 0.8-0.9 1.0-1.4
1.6g0.8 0.6-0.8 0.6-0.7 0.6-0.8
3.2g1.6
2.0-2.4 1.0-1.2 1.8-2.33.2g2.5
2.8-3.4 1.2-1.4 1.4-1.84.5g2.0
2.8-3.4 1.2-1.4 2.3-3.04.5g3.2
4.0-4.6 1.4-1.6 2.1-2.65.7g2.8
4.0-4.6 1.4-1.6 3.5-4.8
(in mm)
5.7g5.0
Reflow Soldering
Land
Chip Capacitor
cSolder Resist
ab
L
W
Dimensions of Slit (Example)
Preparing the slit helps flux cleaning and resin
coating on the back of the capacitor.
However, the length of the slit design should
be as short as possible to prevent mechanical
damage in the capacitor.
A longer slit design might receive more severe
mechanical stress from the PCB.
Recommended slit design is shown in the
Table.
LgWd e
2.0g1.25 -
1.0-2.0
-
1.6g0.8 - -
3.2-3.73.2g1.6
1.0-2.0 4.1-4.63.2g2.5
1.0-2.8 3.6-4.14.5g2.0
1.0-2.8 4.8-5.34.5g3.2
1.0-4.0 4.4-4.95.7g2.8
1.0-4.0 6.6-7.1
(in mm)
5.7g5.0
Land
Chip Capacitor SlitSolder Resist
deL
W
Continued on the following page.
Notice (Soldering and Mounting)
Notice
214
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General Purpose
GRM/GRJ Series
Only for ApplicationsAC250V Type
GA2 Series
Safety Standard
Certified GA3 Series
Product Information
Notice
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
3. Soldering
(1) Limit of losing effective area of the terminations and
conditions needed for soldering. (2) Flux Application
(3) Solder
A
B
C
D
Termination
Continued from the preceding page.
2. Mounting of Chips
Mechanical shock of the chip placer
When the positioning claws and pick-up nozzle are worn,
the load is applied to the chip while positioning is
concentrated in one position, thus causing cracks,
breakage, faulty positioning accuracy, etc.
Careful checking and maintenance are necessary to
prevent unexpected trouble.
An excessively low bottom dead point of the suction
nozzle imposes great force on the chip during mounting,
causing cracked chips. Please set the suction nozzle's
bottom dead point on the upper surface of the board.
Thickness of adhesives applied
Keep thickness of adhesives applied (50-105µm or more)
to reinforce the adhesive contact considering the
thickness of the termination or capacitor (20-70µm) and
the land pattern (30-35µm).
Continued on the following page.
Depending on the conditions of the soldering
temperature and/or immersion (melting time),
effective areas may be lost in some parts of the
terminations.
To prevent this, be careful in soldering so that any
possible loss of the effective area on the terminations
will securely remain at a maximum of 25% on all
edge length A-B-C-D-A of part with A, B, C, D, shown
in the Figure below.
An excessive amount of flux generates a large quantity of
flux gas, causing deteriorated solderability. So apply flux
thinly and evenly throughout. (A foaming system is
generally used for flow soldering.)
Flux containing too high a percentage of halide may
cause corrosion of the outer electrodes without sufficient
cleaning. Use flux with a halide content of 0.2% max.
Do not use strong acidic flux.
Do not use water-soluble flux.*
(*Water-soluble flux can be defined as non rosin type flux
including wash-type flux and non-wash-type flux.)
The use of Sn-Zn based solder will deteriorate the
reliability of the MLCC.
Please contact our sales representative or product
engineers on the use of Sn-Zn based solder in advance.
in section
in section
in section in section
in section
in section
Land Layout to Prevent Excessive Solder
Mounting Close to a Chassis Mounting with Leaded Components Mounting Leaded Components Later
Examples
to Be Avoided
Examples of
Improvements
by the Land
Division
Lead Wire Connected
to a Part Provided
with Lead Wires.
ChassisSolder (Ground solder)
Adhesive
Base board
Land Pattern
d1Soldering Iron
Lead Wire of
Component to be
Connected Later.
Solder Resist
Solder Resist
d2d1<d2Solder Resist
Notice
215
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General Purpose
GRM/GRJ Series
Only for ApplicationsAC250V Type
GA2 Series
Safety Standard
Certified GA3 Series
Product Information
Notice
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
4. Cleaning
Please confirm there is no problem in the reliability of the
product beforehand when cleaning it with the intended
equipment.
The residue after cleaning it might cause a decrease in
the surface resistance of the chip and the corrosion of the
electrode part, etc. As a result it might cause reliability to
deteriorate. Please confirm beforehand that there is no
problem with the intended equipment in ultrasonic
cleansing.
5. Resin Coating
Please use it after confirming there is no influence on the
product with the intended equipment before the resin
coating and molding.
A cracked chip might be caused at the cooling/heating
cycle by the amount of resin spreading and/or bias
thickness.
The resin for coating and molding must be selected as
the stress is small when stiffening and the hygroscopic is
low as possible.
Continued from the preceding page.
Notice
216
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Rating
1. Capacitance change of capacitor
(1) In the case of X7R char.
Capacitors have an aging characteristic, whereby
the capacitor continually decreases its
capacitance slightly if the capacitor is left on
for a long time. Moreover, capacitance might change
greatly depending on the surrounding temperature
or an applied voltage. Therefore, it is not likely to be
suitable for use in a time constant circuit.
Please contact us if you need detailed information.
(2) In the case of any char. except X7R
Capacitance might change a little depending on the
surrounding temperature or an applied voltage.
Please contact us if you intend to use this product
in a strict time constant circuit.
2. Performance check by equipment
Before using a capacitor, check that there is no
problem in the equipment's performance and the
specifications.
Generally speaking, CLASS 2 (X7R char.) ceramic
capacitors have voltage dependence characteristics
and temperature dependence characteristics in
capacitance. Therefore, the capacitance value may
change depending on the operating condition in the
equipment.
Accordingly, be sure to confirm the apparatus
performance of receiving influence in a capacitance
value change of a capacitor, such as leakage current
and noise suppression characteristics.
Moreover, check the surge-proof ability of a
capacitor in the equipment, if needed, because the
surge voltage may exceed the specific value by the
inductance of the circuit.
For General Purpose
GRM/GRJ Series
Only for ApplicationsAC250V Type
GA2 Series
Safety Standard
Certified GA3 Series
Product Information
Notice
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
ISO 9001 Certifications
217
Plant
Fukui Murata Mfg. Co., Ltd.
Izumo Murata Mfg. Co., Ltd.
Okayama Murata Mfg. Co., Ltd.
Murata Electronics Singapore (Pte.) Ltd.
Wuxi Murata Electronics Co., Ltd.
Beijing Murata Electronics Co., Ltd.
Qualified Standards
The products listed here have been produced by ISO 9001
certified factory.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C02E.pdf
10.12.20