3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ 4-Wall, Tripolarized Header
.050" × .100" Latch/Ejector, PTH & SMT Straight, PTH Right Angle 810 Series
• Tripolarized for robust alignment when mating to 820
series socket
• 50 mil × 100 mil halves the connector length vs. traditional
100 mil x 100 mil products
• Latching Ejector for rugged high performance applications
• Available for through hole or surfacemount attachment
• High temperature plastic for lead free surfacemount or
Paste-in-Hole soldering methods
• Four-wall shroud provides contact protection
• Contacts: 20, 26, 36, 40, 50, 60, 68, 80 and 100
• See the Regulatory Information Appendix (RIA)
in the “RoHS compliance” section of
www.3Mconnectors.com for compliance information
Date Modifi ed: May 11, 2012 TS-0253-H
Sheet 1 of 7
Physical
Insulation:
Material: High Temperature Plastic (LCP)
Flammability: UL 94V-0
Color: Black (RB Plating only) or Natural
Contact:
Material: Copper Alloy
Plating:
Underplating: 100 µ" [2.54 mm] Nickel
Wiping Area: 30 µ" [0.76 mm] Gold
Solder Tails: Matte Tin or Tin Lead (See Ordering Information)
Marking: 3M Logo, Part Number and Orientation Triangle
Mating Compatibility: 820 Series (TS-0254)
Electrical
Current Rating: 3.00 A, 1 Contact Powered
2.00 A, 4 Contacts Powered
0.75 A, All Contacts powered
Rating Conditions: EIA-364-070 Method 2, 30 degrees C maximum temperature
rise, 20% derated. Reference appropriate 3M Product Specifi cation for detailed
current derating curves.
Insulation Resistance: > 1 × 109 Ω at 500 VDC
Withstanding Voltage: 500 VRMS at Sea Level
Environmental
Temperature Rating: -55°C to +105°C
Process Rating: Maximum 260°C (Profi le per J-STD-020C)
Moisture Sensitivity Level: 1 (per J-STD-020C)
UL File No.: E68080
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ 4-Wall, Tripolarized Header
.050" × .100" Latch/Ejector, PTH & SMT Straight, PTH Right Angle 810 Series
TS-0253-H
Sheet 2 of 7
Inch
[Imm]
Tolerance Unless Noted
.0 .00 .000
Inch ±.1 ±.01 ±.005
[ ] Dimensions for Reference Only
Ordering Information PTH Right Angle Header
81XXX - 5X0X03 - XX
Notes:
D
Position 1
Orientation Triangle
.440 ± .010
[11.18]
.620 Ref
[ 15.75 ] .405
[10.29]
.265
[6.73]
2X Ø.116
[2.95] .105
[2.67]
.160 Ref
[4.06]
.306 Ref
[7.77]
“F” (See Table 2)
.015
[0.38]
.140 ± .010
[3.56]
Short Latch
Long Latch
.165 ± .010
[ 4.19 ]
.828 Ref
[ 21.03 ]
Table 1
Contact
Quantity
Dimensions
A B C D Short
(Ref.)
D Long
(Ref.)
020 1.060
[26.92]
0.722
[18.34]
0.500
[12.70]
1.671
[42.44]
1.842
[46.79]
026 1.210
[30.73]
0.872
[22.15]
0.650
[16.51]
1.821
[46.25]
1.992
[50.60]
036 1.460
[37.08]
1.122
[28.50]
0.900
[22.86]
2.071
[52.60]
2.242
[56.95]
040 1.560
[39.62]
1.222
[31.04]
1.000
[25.40]
2.171
[55.14]
2.342
[59.49]
050 1.810
[45.97]
1.472
[37.39]
1.250
[31.75]
2.421
[61.49]
2.592
[65.84]
060 2.060
[52.32]
1.722
[43.74]
1.500
[38.10]
2.671
[67.84]
2.842
[72.19]
068 2.260
[57.40]
1.922
[48.82]
1.700
[43.18]
2.871
[72.92]
3.042
[77.27]
080 2.560
[65.02]
2.222
[56.44]
2.000
[50.80]
3.171
[80.54]
3.342
[84.89]
100 3.060
[77.72]
2.722
[69.14]
2.500
[63.50]
3.671
[93.24]
3.842
[97.59]
C
Table 2
PCB Thickness "F" Solder Tail Length ± .010
.062 [1.57] .090 [2.29]
.094 [2.39] .112 [2.84]
.125 [3.18] .143 [3.63]
A
B
C
.015 X .015
[0.38] X [0.38]
See Note 1
Position 2
2X .092
[2.34]
.310
[7.87]Position 1
.050 Typ
[1.27]
.100 Ref
[2.54]
.015 X .015
[0.38] X [0.38]
Notes:
1. This polarization bump does not exist on the 20 position header.
2. Recommended to be mated to the .050" X .100" Wiremount Socket 820 Series.
Ejector/Latch System:
0 = None (Special Order)
5 = With Short Ejectors Installed (Special Order)
6 = With Long Ejector Latches Installed (Standard)
Contact Tail:
2 = Solder Tail for .062 [ 1.57 ] PC Board (Standard)
3 = Solder Tail for .094 [ 2.39 ] PC Board (Special Order)
4 = Solder Tail for .125 [ .318 ] PC Board (Special Order)
Plating suffix:
blank = 125 µ" tin lead tails (RIA E3 & C2 apply)
RB = 250 µ" matte tin tails (RIA E1 & C1 apply)
Contact Quantity
(See Table 1)
Ejector Latches
(If Ordered Separately)
Long Latches
3505-28 (natural)
3505-28B (black)
Short Latches
3505-29 (natural)
3505-29B (black)
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ 4-Wall, Tripolarized Header
.050" × .100" Latch/Ejector, PTH & SMT Straight, PTH Right Angle 810 Series
TS-0253-H
Sheet 3 of 7
*Solder Thief Solder Pads
(See Note 2)
.050 ± .002
[1.27]
.100 ± .002
[2.54]
.045 - .060
[1.14] - [1.52]
.025 - .035
[0.64] - [0.89]
*Solder Thief Solder Pads required only on Solder side of PC Board.
View A
Ø.024 ± .003 Typ
[0.64]
.050 ± .002 Typ
[1.27]
Tolerance Noncumulative
Flow Solder
Direction
Position 2
Position 1
.100 ± .002
[2.54]
2X Ø .109 ± .002
[2.77] Ø.024 ± .003 Typ
[0.64]
C ± .002
E
.025 ± .002
[0.64]
.355 Max
[9.02]
.305 Min
[7.75]
.160 ± .002
[4.06]
View A
Table 3
Ejector Latches Dimension E Min
None .575 [14.61]
Long 1.010 [25.65]
Short .885 [22.48]
Recommended Mounting Hole Pattern
PTH Right Angle Header
(shown for mounting side of PC Baord)
Notes:
1. Recommended to process PC Boards through the solder bath such that the connector enters end first (two solder tails at a time).
This will help prevent solder bridging.
2. A Dummy or Solder Thief Solder Pad at the end of each row is recommended on the bottom or solder side of the PC
Board in order to help prevent solder bridging on the end solder tails. The solder thiefs are only required on the end of the rows which leave the
solder bath last.
3. In order to facilitate soldering it is recommended that ejector latches be installed after the soldering process.
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ 4-Wall, Tripolarized Header
.050" × .100" Latch/Ejector, PTH & SMT Straight, PTH Right Angle 810 Series
TS-0253-H
Sheet 4 of 7
Table 1
Contact
Quantity
Dimensions
A B C Short (Ref.) C Long (Ref.) D
020 1.060 [26.92] 0.722 [18.34] 1.671 [42.44] 1.842 [46.79] 0.860 [21.84]
026 1.210 [30.73] 0.872 [22.15] 1.821 [46.25] 1.992 [50.60] 1.010 [25.65]
036 1.460 [37.08] 1.122 [28.50] 2.071 [52.60] 2.242 [56.95] 1.260 [32.00]
040 1.560 [39.62] 1.222 [31.04] 2.171 [55.14] 2.342 [59.49] 1.360 [34.54]
050 1.810 [45.97] 1.472 [37.39] 2.421 [61.49] 2.592 [65.84] 1.610 [40.89]
060 2.060 [52.32] 1.722 [43.74] 2.671 [67.84] 2.842 [72.19] 1.860 [47.24]
068 2.260 [57.40] 1.922 [48.82] 2.871 [72.92] 3.042 [77.27] 2.060 [52.32]
080 2.560 [65.02] 2.222 [56.44] 3.171 [80.54] 3.342 [84.89] 2.360 [59.94]
100 3.060 [77.72] 2.722 [69.14] 3.671 [93.24] 3.842 [97.59] 2.860 [72.64]
C
Notes:
1. This polarization bump does not exist
on the 20 position header.
2. Recommended to be mated to the
.050" x .100" 820 Series Socket.
Ordering Information PTH Straight Header
81XXX - 6X0X0X - XX
Ejector/Latch System:
0 = None (Special Order)
5 = With Short Ejectors Installed (Special Order)
6 = With Long Ejector Latches Installed (Standard)
Contact Tail:
2 = Solder Tail for .062 [ 1.57 ] PC Board (Standard)
3 = Solder Tail for .094 [ 2.39 ] PC Board (Special Order)
4 = Solder Tail for .125 [ .318 ] PC Board (Special Order)
Plating suffix:
blank = 125 µ" tin lead tails (RIA E3 & C2 apply)
RB = 250 µ" matte tin tails (RIA E1 & C1 apply)
Contact Quantity
(See Table 4)
Ejector Latches
(If Ordered Separately)
Long Latches
3505-28 (natural)
3505-28B (black)
Short Latches
3505-29 (natural)
3505-29B (black)
A
B
See Note 1
Position 2
.310
[7.87]
Position 1
.015 X .015
[ 0.38 ] X [ 0.38 ]
.050 Typ
[1.27]
.100 Ref
[2.54]
Optional Press
t post mount
alignment feature
Position 1 Orientation Triangle
[0.38 X 0.38]
4.18
.165
±.010
2.34
.092
2X
10.29
.405
.38
.015
21.03
.828 Ref
15.75
.620 Ref
2,95
.116
2XØ
11.17
.440
±.010
.015
X.015
D
.265 [6.73]
.140 ±
.010
“F”
(See Table 2)
.100
[2.54]
.05 Ref
Contact
Mating
Point
Table 5
PCB Thickness "F" Solder Tail Length ± .010
.062 [1.57] .092 [2.34]
.094 [2.39] .110 [2.79]
Board Mounting Options:
1 = None (Special Order)
3 = Press fit posts both ends (Standard)
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ 4-Wall, Tripolarized Header
.050" × .100" Latch/Ejector, PTH & SMT Straight, PTH Right Angle 810 Series
TS-0253-H
Sheet 5 of 7
.050 ± .002
[1.27]
∅.025 ± .003
[0.64]
.100 ± .002
[2.54]
.045 - .060
[1.14] - [1.52]
.025 - .035
[0.64] - [0.89]
*Solder Thief Solder Pads required only on
Solder side of PC Board.
View A
*Solder Thief
Solder Pads
(See Note2)
VIEW A
2X .205 ± .003
[5.21]
.050 ± .002 Typ
[1.27]
Tolerance Noncumulative
Flow Solder
Direction
.160 Min
[4.06]
.050 ± .003
[1.27]
.100 ± .002
[2.54]
.225 Min
[5.72]
.100 ± .002
[2.54]
2X ∅ .109 ± .002
[2.77]
D ± .002
E
∅.025 ± .003 Typ
[0.64]
View A
Table 6
Ejector/Latches Dimension E (Min)
None .215 [5.46]
Long .650 [16.51]
Short .525 [13.34]
Inch
[Imm]
Tolerance Unless Noted
.0 .00 .000
Inch ±.1 ±.01 ±.005
[ ] Dimensions for Reference Only
Recommended Mounting Hole Pattern
PTH Vertical Header
(shown for mounting side of PC Board)
Note:
1. Recommended to process PC Boards through the solder bath such that the connector enters end first
(two solder tails at a time). This will help prevent solder bridging.
2. A Solder Thief Solder Pad (Dummy Pad) at the end of each row is recommended on the bottom or solder side of the PC Board in order to
help prevent solder bridging on the end solder tails. The Solder Thiefs are only required on the end of the rows which leave the solder
bath last.
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ 4-Wall, Tripolarized Header
.050" × .100" Latch/Ejector, PTH & SMT Straight, PTH Right Angle 810 Series
TS-0253-H
Sheet 6 of 7
.346 ± .010
[8.79]
.140 ± .010
[3.56]
.265
[6.73]
Position 1
Orientation
Triangle
.440 ± .010
[11.18]
.620 Ref
[15.75]
D
.165 ± .010
[4.19]
Short Latch
Long Latch
.092
[2.34]Optional Single Press
Fit Post Mount/Alignment
Feature
∅.116
[2.95]
Optional Metal
Clip Retention
.015
[0.38]
.405
[10.29]
.828 Ref
[21.03]
.093
[2.36]
.05 Ref
Contact
Mating
Point
Table 7
Contact
Quantity
Dimensions
A B D Short
(Ref.)
D Long
(Ref.)
Tape & Reel
Suffix
020 1.060
[26.92]
0.722
[18.34]
1.671
[42.44]
1.842
[46.79] WD
026 1.210
[30.73]
0.872
[22.15]
1.821
[46.25]
1.992
[50.60]
WF036 1.460
[37.08]
1.122
[28.50]
2.071
[52.60]
2.242
[56.95]
040 1.560
[39.62]
1.222
[31.04]
2.171
[55.14]
2.342
[59.49]
050 1.810
[45.97]
1.472
[37.39]
2.421
[61.49]
2.592
[65.84]
WF
060 2.060
[52.32]
1.722
[43.74]
2.671
[67.84]
2.842
[72.19]
068 2.260
[57.40]
1.922
[48.82]
2.871
[72.92]
3.042*
[77.27]
WG
080 2.560
[65.02]
2.222
[56.44]
3.171*
[80.54]
3.342*
[84.89]
100 3.060
[77.72]
2.722
[69.14]
3.671
[93.24]
3.842
[97.59] WH
*Requires WH pocket tape
Ordering Information SMT Straight Header
81XXX - 6X0C0X - XX - XX
Ejector/Latch System:
0 = None (Special Order)
5 = With Short Ejectors Installed (Special Order)
6 = With Long Ejector Latches Installed
(Standard)
Board Mounting Options:
1 = None
4 = Press Fit Post Mount at Position 1 end
7 = Metal retention clips
8 = #1 end press fit post & metal retention clips
(Special Order)
Packaging Options:
Blank = Trays
WX = Tape & Reel Package
(see table)
Contact Quantity
(See Table 7)
Ejector Latches
(If Ordered Separately)
Long Latches
3505-28 (natural)
3505-28B (black)
Short Latches
3505-29 (natural)
3505-29B (black)
C
Inch
[Imm]
Tolerance Unless Noted
.0 .00 .000
Inch ±.1 ±.01 ±.005
[ ] Dimensions for Reference Only
Plating suffix:
blank = 125 µ" tin lead tails (RIA E3 & C2 apply)
RB = 250 µ" matte tin tails (RIA E1 & C1 apply)
Notes:
1. This polarization bump does not exist on the 20 position header.
2. Recommended to be mated to the .050" X .100" 820 Series Wiremount Socket.
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ 4-Wall, Tripolarized Header
.050" × .100" Latch/Ejector, PTH & SMT Straight, PTH Right Angle 810 Series
TS-0253-H
Sheet 7 of 7
.065 ± .002 Typ
[1.65]
Typ, Full R
Detail A
Optional plated thru hole
for metal clip retention
.042 ± .003 Typ (Plated thru hole)
[1.07]
Recommended Mounting Hole Pattern,
SMT Straight Header
(Shown for mounting side of PC Board)
.050 ± .002 Typ
[1.27]
Tolerance Noncumulative
2X .075 ± .002
[1.905]
.205 ± .003
[5.21]
.376
[9.55]
.280
[7.11]
H
Optional Drilled Hole
for Plastic Post
∅.109 ± .002
[2.77]
.220 ± .003
[5.59]
.158 ± .002
[4.01]
See Detail A
F
.029 ± .001
[0.74]
Position 2
.110 ± .002
[2.79]
Position 1
C
L
C
L
C
L
C
L
G
Ejector Latches Dimensions
H Min
None .775 [19.69]
Long 1.085 [27.56]
Short 1.21 [30.73]
No. of Positions Dimensions
F G
20 .450 [11.43] N/A
26 .600 [15.24] .025 [0.64]
36 .850 [21.59] N/A
40 .950 [24.13] N/A
50 1.200 [30.48] .025 [.64]
60 1.450 [36.83] 0.000
68 1.650 [41.91] 0.000
80 1.950 [49.53] 0.000
100 2.450 [62.23] 0.000
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable,
but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for
your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are
not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect
unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of ninety (90) days from the time of purchase. 3M
MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at
3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M
will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless
of the legal theory asserted.
Please recycle. Printed in USA.
© 3M 2012. All rights reserved.
RIA-2217B-E
3
3M Electronics Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
U.S.A.
1-800-225-5373
www.3Mconnectors.com 3M is a trademark of 3M Company.
