Devices
AlGaAs HER HER Yellow Green
Red Low Std. Low Std. Std.
Current Current Current Current Current Package
HDSP- HDSP- HDSP- HDSP- HDSP- Description Drawing
315H 315E 315L 315Y 315G Common Anode, A
10 mm Display
316H 316E 316L 316Y 316G Common Cathode, B
10 mm Display
515H 515E 515L 515Y 515G Common Anode, A
13 mm Display
516H 516E 516L 516Y 516G Common Cathode, B
13 mm Display
10 mm and 13 mm Slim Font
Seven Segment Displays
Technical Data
Features
• Excellent Appearance
• Slim Font Design
• Mitered Corners, Evenly
Illuminated Segments
• Gray Face for Optimum
On/Off Contrast
• Choice of Colors: DH AlGaAs
Red, High Efficiency Red
(HER), Yellow, and Green
• Low Current Available,
AlGaAs Red and HER Choice
of Character Size: 10 mm
and 13 mm
±50° Viewing Angle
• Characterized for Luminous
Intensity
HDSP-315x Series
HDSP-316x Series
HDSP-515x Series
HDSP-516x Series
Description
The HDSP-31xx-51xx Series of
displays incorporates a new slim
font character design. This slim
font features narrow width,
specially mitered segments to give
a fuller appearance to the
illuminated character. Faces of
these displays are painted a
neutral gray for enhanced on/off
contrast.
All devices are available in either
common anode or common
cathode configuration with right
hand decimal point. Low current
versions are available in either
AlGaAs red or HER.
2
Part Numbering System
Notes:
1. For codes not listed in the figure above, please refer to the respective datasheet or contact
your nearest Agilent representative for details.
2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are
typically restricted to 1 bin per tube (exceptions may apply). Please refer to respective
datasheet for specific bin limit information.
5082 -X X X X-X X X X X
HDSP-X X X X-X X X X X
Mechanical Options[1]
00: No Mechanical Option
Color Bin Options[1,2]
0: No Color Bin Limitation
Maximum Intensity Bin[1,2]
0: No Maximum Intensity Bin Limitation
Minimum Intensity Bin[1,2]
0: No Minimum Intensity Bin Limitation
Device Configuration/Color[1]
H: AlGaAs Red
E: High Efficiency Red
G: Green
Y: Yellow
Device Specific Configuration[1]
Refer to Respective Datasheet
Package[1]
Refer to Respective Datasheet
3
HDSP-315x/316x Series
HDSP-515x/516x Series
10
9.7 ± 0.1
0.3 ± 0.05
7.62
± 0.38
DIA. 1.2
10° 0.9
12.8
± 0.2
6
2.54 ± 0.38
0.53
± 0.05
4 x 2.54
6.4
± 0.1
7
± 0.1
10.4 MIN.
1
2
3
4
5
6
7
8
9
10
g
f
Common A/C
e
d
DP
c
Common A/C
b
a
1
2
3
4
5
10
9
8
7
6
DP
a
b
g
c
d
e
f
HDSP-XXXX
XYY ZW
COLOR BIN (NOTE 3)
LUMINOUS
INTENSITY
CATEGORY
DATE
CODE
PIN FUNCTION
13.0
12.25 ± 0.15
0.58 ± 0.08 2.54 ± 0.3 TYP.
DIA. 1.25
10°
1.25
17.50
7.40
0.29 ± 0.08 TYP.
15.24 ± 0.3
6.40
± 0.1
7.00
± 0.1
3.60 ± 0.3
PIN FUNCTION
1
2
3
4
5
6
7
8
9
10
e
d
Common A/C
c
DP
b
a
Common A/C
f
g
HDSP-XXXX
XYY ZW
COLOR BIN (NOTE 3)
LUMINOUS
INTENSITY
CATEGORY
DATE
CODE
1.04 ± 0.3 TYP.
+ 0.3
0.1
1 2 3 4 5
10 9 8 7 6
5.08
DP
a
b
g
c
d
e
f
NOTES: 1. PACKAGE DIMENSIONS IN MILLIMETERS.
2. UNTOLERANCED DIMENSIONS ARE FOR REFERENCE ONLY.
3. FOR YELLOW AND GREEN DEVICES ONLY.
4
Absolute Maximum Ratings
AlGaAs HER
Red Low Low
Description Current HER Current Yellow Green Units
Average Power per 37 105 52 80 105 mW
Segment or DP
Peak Forward 45 90[2] 45 60[5] 90[7] mA
Current per Segment
or DP
DC Forward Current 15[1] 30[3] 15[4] 20[6] 30[8] mA
per Segment or DP
Operating Tempera- -20 to 100 -40 to +100 °C
ture Range
Storage Temperature -40 to +100 °C
Range
Reverse Voltage per 3.0 V
Segment or DP
Wavesoldering 250 °C
Temperature for
3 seconds 1.59 mm.
below body
Notes:
1. Derate above 91°C at 0.53 mA/°C.
2. See Figure 4 to establish pulsed conditions.
3. Derate above 53°C at 0.45 mA/°C.
4. Derate above 80°C at 0.38 mA/°C.
5. See Figure 5 to establish pulsed conditions.
6. Derate above 81°C at 0.52 mA/°C.
7. See Figure 6 to establish pulsed ocnditions.
8. Derate above 39°C at 0.37 mA/°C.
5
AlGaAs Red Low Current
Device
Series Test
HDSP- Parameter Symbol Min. Typ. Max. Units Conditions
315/316H Luminous Intensity/Segment[1,2] IV180 650 µcd IF = 1 mA
515/516H (Digit Average)
Forward Voltage/Segment or DP VF1.8 2.2 V IF = 1 mA
Peak Wavelength λPEAK 645 nm
Dominant Wavelength[3] λd637 nm
Reverse Voltage/Segment or DP[4] VR315 V I
R = 100 µA
Thermal Resistance LED RθJ-PIN 255 °C/W/Seg
Junction-to-Pin
HER
Device
Series Test
HDSP- Parameter Symbol Min. Typ. Max. Units Conditions
315/316E Luminous Intensity/Segment[1,2] IV450 2600 µcd IF = 10 mA
515/516E (Digit Average)
Forward Voltage/Segment or DP VF1.9 2.5 V IF = 10 mA
Peak Wavelength λPEAK 635 nm
Dominant Wavelength[3] λd626 nm
Reverse Voltage/Segment or DP[4] VR330 V I
R = 100 µA
Thermal Resistance LED RθJ-PIN 200 °C/W/Seg
Junction-to-Pin
HER Low Current
Device
Series Test
HDSP- Parameter Symbol Min. Typ. Max. Units Conditions
315/316L Luminous Intensity/Segment[1,2] IV180 370 µcd IF = 2 mA
515/516L (Digit Average)
Forward Voltage/Segment or DP VF2.1 2.5 V IF = 2 mA
Peak Wavelength λPEAK 635 nm
Dominant Wavelength[3] λd626 nm
Reverse Voltage/Segment or DP[4] VR330 V I
R = 100 µA
Thermal Resistance LED RθJ-PIN 200 °C/W/Seg
Junction-to-Pin
Electrical/Optical Characteristics at T
A = 25°C
6
Green
Device
Series Test
HDSP- Parameter Symbol Min. Typ. Max. Units Conditions
315/316E Luminous Intensity/Segment[1,2] IV450 5000 µcd IF = 10 mA
515/516E (Digit Average)
Forward Voltage/Segment or DP VF2.1 2.5 V IF = 10 mA
Peak Wavelength λPEAK 566 nm
Dominant Wavelength[3] λd571 nm
Reverse Voltage/Segment or DP[4] VR350 V I
R = 100 µA
Thermal Resistance LED RθJ-PIN 200 °C/W/Seg
Junction-to-Pin
Notes:
1. Case temperature of device immediately prior to the intensity measurement is 25°C.
2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package.
3. The dominant wavelength, λ is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of the
device.
4. Typical specification for reference only. Do not exceed absolute maximum ratings.
Yellow
Device
Series Test
HDSP- Parameter Symbol Min. Typ. Max. Units Conditions
315/316Y Luminous Intensity/Segment[1,2] IV450 1800 µcd IF = 10 mA
515/516Y (Digit Average)
Forward Voltage/Segment or DP VF2.0 2.5 V IF = 10 mA
Peak Wavelength λPEAK 583 nm
Dominant Wavelength[3] λd586 nm
Reverse Voltage/Segment or DP[4] VR350 V I
R = 100 µA
Thermal Resistance LED RθJ-PIN 200 °C/W/Seg
Junction-to-Pin
Figure 1. Maximum Allowable Average
or DC Current vs. Ambient
Temperature.
Figure 2. Forward Current vs.
Forward Voltage.
Figure 3. Relative Luminous Intensity
vs DC Forward Current.
16
0
2
4
6
8
10
12
14
20 10090807060504030
T
A
AMBIENT TEMPERATURE °C
I
F
AVE. MAX MAXIMUM AVERAGE
FORWARD CURRENT PER SEGMENT mA
120110
20
18 J-A
Rθ = 770°C/W
IF FORWARD CURRENT
PER SEGMENT mA
1.0 2.5
50.0
2.0
0.1
VF FORWARD VOLTAGE V
1.5 2.0
20.0
10.0
1.0
0.5
0.50
5.0
RELATIVE LUMINOUS INTENSITY
(NORMALIZED TO 1 AT 1mA)
0.5 20
20
2
0.1
IF FORWARD CURRENT
PER SEGMENT mA
12 510
10
5
1
0.5
0.2
0.20.1
AlGaAs Low Current
7
HER, Yellow, and Green
Figure 4. Maximum Tolerable Peak
Current vs. Pulse Duration – HER.
RATIO OF MAXIMUM OPERATING
PEAK CURRENT TO TEMPERATURE
DERATED DC CURRENT
I
F
PEAK
I
DC
MAX
t
p
PULSE DURATION µs
10
1
100
10 1000010001001
OPERATION IN THIS
REGION REQUIRES
TEMPERATURE
DERATING OF I
DC
MAXIMUM
DC OPERATION
3 KHz
100 KHZ
1 KHz
300 Hz
100 Hz
RATIO OF MAXIMUM OPERATING
PEAK CURRENT TO TEMPERATURE
DERATED DC CURRENT
I PEAK
F
I MAX
DC
t
p
PULSE DURATION µs
10
1
100
10 1000010001001
OPERATION IN THIS
REGION REQUIRES
TEMPERATURE
DERATING OF I
DC
MAXIMUM
DC OPERATION
3 KHz
10 KHZ
1 KHz
300 Hz
100 Hz
Figure 5. Maximum Tolerable Peak
Current vs. Pulse Duration – Yellow.
Figure 8. Forward Current vs.
Forward Voltage Characteristics.
Figure 9. Relative Luminous Intensity
vs. DC Forward Current.
0
100
80
60
40
20
IF FORWARD CURRENT PER SEGMENT mA
2.0 4.03.01.0
VF FORWARD VOLTAGE V
05.0
YELLOW
HER
GREEN
RELATIVE LUMINOUS INTENSITY
(NORMALIZED TO 1 AT 5 mA FOR HER AND
YELLOW AND TO 1 AT 10 mA FOR GREEN)
15
0
10
8
6
4
2
2053010 25
12
I
F
FORWARD CURRENT PER SEGMENT mA
0
YELLOW
GREEN
HER
RATIO OF MAXIMUM OPERATING
PEAK CURRENT TO TEMPERATURE
DERATED DC CURRENT
I
F
PEAK
I
DC
MAX
t
p
PULSE DURATION µs
10
1
100
10 1000010001001
OPERATION IN THIS
REGION REQUIRES
TEMPERATURE
DERATING OF I
DC
MAXIMUM
DC OPERATION
3 KHz
10 KHZ
1 KHz
300 Hz
100 Hz
Figure 6. Allowable Peak Current vs.
Pulse Duration – Green.
Figure 7. Maximum Allowable DC
Current per Segment as a Function of
Ambient Temperature.
40
0
5
10
15
20
25
30
35
20 10090
807060504030
T
A
AMBIENT TEMPERATURE °C
I
DC
MAX MAXIMUM DC CURRENT
PER SEGMENT mA
120110
50
45
HER
YELLOW
GREEN
Rθ = 770°C/W
J-A
8
HER Low Current
Figure 12. Relative Luminous
Intensity vs. DC Forward Current.
Figure 11. Forward Current vs.
Forward Voltage.
Figure 10. Maximum Allowable
Average or DC Current vs. Ambient
Temperature.
IF FORWARD CURRENT PER SEGMENT mA
0
0
VF FORWARD VOLTAGE V
1.0 2.0
50
40
30
20
10
0.5 1.5 3.0
HER
2.5
16
0
2
4
6
8
10
12
14
20 10090807060504030
T
A
AMBIENT TEMPERATURE °C
I
F
AVE. MAX MAXIMUM AVERAGE
FORWARD CURRENT PER SEGMENT mA
120110
20
18 J-A
Rθ = 770°C/W
HER
RELATIVE LUMINOUS INTENSITY
(NORMALIZED TO 1 AT 2 mA FOR HER AND
TO 1 AT 4 mA FOR YELLOW AND GREEN
0
0
VF FORWARD CURRENT PER SEGMENT mA
610
16
12
10
6
2
28 16
HER
14
14
8
4
412
Intensity Bin Limits (mcd)
HER Low Current, AlGaAs Red Low Current
HER Std. Current, Green Std. Current,
Yellow Std. Current
HDSP-31xL/H, HDSP-51xL/H
IV Bin Category Min. Max.
E 0.180 0.360
F 0.280 0.560
G 0.450 0.900
H 0.700 1.400
I 1.100 2.200
K 1.800 3.600
L 2.800 5.600
M 4.500 9.000
N 7.000 15.000
HDSP-31xE/G/Y, HDSP-51xE/G/Y
IV Bin Category Min. Max.
G 0.450 0.900
H 0.700 1.400
I 1.100 2.200
K 1.800 3.600
L 2.800 5.600
M 4.500 9.000
N 7.000 15.000
9
Electrical/Optical
For more information on
electrical/optical characteristics,
please see Application Note 1005.
Contrast Enhancement
For information on contrast
enhancement, please see
Application Note 1015.
Soldering/Cleaning
Cleaning agents from the ketone
family (acetone, methyl ethyl
ketone, etc.) and from the
chlorinated hydrocarbon family
(methylene chloride, trichloro-
ethylene, carbon tetrachloride,
etc.) are not recommended for
cleaning LED parts. All of these
various solvents attack or dissolve
the encapsulating epoxies used to
form the package of plastic LED
parts.
For further information on
soldering LEDs, please refer to
Application Note 1027.
Dominant Wavelength (nm)
Color Bin Min. Max.
Yellow 1 581.50 585.00
3 584.00 587.50
2 586.50 590.00
4 589.00 592.50
Green 2 573.00 577.00
3 570.00 574.00
4 567.00 571.00
5 564.00 568.00
Note:
All categories are established for classification of products. Products
may not be available in all categories. Please contact your local
Agilent representatives for further clarification/information.
Color Categories
www.agilent.com/semiconductors
For product information and a complete list of
distributors, please go to our web site.
For technical assistance call:
Americas/Canada: +1 (800) 235-0312 or
(916) 788-6763
Europe: +49 (0) 6441 92460
China: 10800 650 0017
Hong Kong: (+65) 6756 2394
India, Australia, New Zealand: (+65) 6755 1939
Japan: (+81 3) 3335-8152(Domestic/Interna-
tional), or 0120-61-1280(Domestic Only)
Korea: (+65) 6755 1989
Singapore, Malaysia, Vietnam, Thailand,
Philippines, Indonesia: (+65) 6755 2044
Taiwan: (+65) 6755 1843
Data subject to change.
Copyright © 2005 Agilent Technologies, Inc.
Obsoletes 5988-3204EN
March 9, 2005
5989-2640EN