E-ULQ2003D1 - STMicroelectronics - searchdatasheet.com

February 2011 Doc ID 1537 Rev 6 1/14

ULQ2001

ULQ2003 - ULQ2004

Seven Darlington array

Features

■Seven Darlington per package

■Extended temperature range: -40 to 105 °C

■Output current 500 mA per driver (600 mA

peak)

■Output voltage 50 V

■Automotive Grade product in SO16 package

■Integrated suppression diodes for inductive

loads

■Outputs can be paralleled for higher current

■TTL/CMOS/PMOS/DTL compatible inputs

■Inputs pinned opposite outputs to simplify

layout

Description

The ULQ2001, ULQ2003 and ULQ2004 are high

voltage, high current Darlington arrays each

containing seven open collector Darlington pairs

with common emitters. Each channel rated at 500

mA and can withstand peak currents of 600 mA.

Suppression diodes are included for inductive

load driving and the inputs are pinned opposite

the outputs to simplify board layout. The versions

interface to all common logic families. These

versatile devices are useful for driving a wide

range of loads including solenoids, relays DC

motors, LED displays filament lamps, thermal

print-heads and high power buffers. The

ULQ2001A/2003A and 2004A are supplied in 16

pin plastic DIP packages with a copper lead-

frame to reduce thermal resistance. They are

available also in small outline package (SO16) as

ULQ2003D1/2004D1. The ULQ2003 is available

as Automotive Grade in SO16 package. The

commercial part numbers is shown in the order

codes. This device is qualified according to the

specification AEC-Q100 of the Automotive

market, in the temperature range -40 °C to 125 °C

and the statistical tests PAT, SYL, SBL are

performed.

DIP-16 SO16

(Narrow)

Table 1. Device summary

Part numbers Order codes Description Packages

ULQ2001 ULQ2001A General purpose, DTL, TTL,

PMOS, CMOS DIP-16

ULQ2003 ULQ2003A 5 V TTL, CMOS DIP-16

ULQ2004 ULQ2004A 6–15 V CMOS, PMOS DIP-16

ULQ2003 ULQ2003D1013TR SO16 in tape and reel

ULQ2003 ULQ2003D1013TRY (1) SO16 in tape and reel

ULQ2004 ULQ2004D1013TR SO16 in tape and reel

1. Automotive Grade products.

www.st.com

Contents ULQ2001, ULQ2003, ULQ2004

2/14 Doc ID 1537 Rev 6

Contents

1 Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2 Pin configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

3 Maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

4 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

5 Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

6 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

7 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

ULQ2001, ULQ2003, ULQ2004 Diagram

Doc ID 1537 Rev 6 3/14

1 Diagram

Figure 1. Schematic diagram

ULQ2001 (each driver) ULQ2003 (each driver)

ULQ2004 (each driver)

Pin configuration ULQ2001, ULQ2003, ULQ2004

4/14 Doc ID 1537 Rev 6

2 Pin configuration

Figure 2. Pin connections (top view)

ULQ2001, ULQ2003, ULQ2004 Maximum ratings

Doc ID 1537 Rev 6 5/14

3 Maximum ratings

Table 2. Absolute maximum ratings

Symbol Parameter Value Unit

Output voltage 50 V

Input voltage (for ULQ2003A/D1 - 2004A/D1) 30 V

Continuous collector current 500 mA

Continuous base current 25 mA

Operating ambient temperature range -40 to 105 °C

STG

Storage temperature range -55 to 150 °C

Junction temperature 150 °C

Table 3. Thermal data

Symbol Parameter DIP-16 SO16 Unit

RthJA Thermal resistance junction-ambient, max. 70 120 °C/W

Electrical characteristics ULQ2001, ULQ2003, ULQ2004
6/14 Doc ID 1537 Rev 6
4 Electrical characteristics
T
J
 = -40 to 105 °C for DIP16 unless otherwise specified,
T
J
 = -25 to 105 °C for SO16 unless otherwise specified.
         
Table 4. Electrical characteristics
Symbol Parameter Test conditions Min. Typ. Max. Unit
I
CEX
Output leakage current
V
CE 
= 50V, (Figure 3)50
µA
T
J 
= 105°C, V
CE
= 50V (Figure 3)100
T
J
 = 105°C for ULQ2004, V
CE
= 50V, 
V
I
 = 1V (Figure 4)500
V
CE(SAT)
Collector-emitter saturation 
voltage (Figure 5)
I
C
 = 100mA, I
B
 = 250µA 0.9 1.1
VI
C 
= 200mA, I
B
= 350µA 1.1 1.3
I
C
 = 350mA, I
B
= 500µA 1.3 1.6
I
I(ON)
Input current (Figure 6)
for ULQ2003, V
I
 = 3.85V 0.93 1.35
mAfor ULQ2004, V
I
 = 5V 0.35 0.5
for ULQ2004, V
I
 = 12V 1 1.45
I
I(OFF)
Input current (Figure 7)T
J 
= 105°C, I
C
 = 500µA 50 65 µA
V
I(ON)
Input voltage (Figure 8)
for ULQ2003
V
CE
= 2V, I
C
 = 200mA
V
CE
= 2V, I
C
 = 250mA
V
CE
= 2V, I
C
 = 300mA
for ULQ2004
V
CE
= 2V, I
C
 = 125mA
V
CE
= 2V, I
C
 = 200mA
V
CE
= 2V, I
C
 = 275mA
V
CE
= 2V, I
C
 = 350mA
2.4
2.7
3
5
6
7
8
V
h
FE
DC forward current gain 
(Figure 5)
for ULQ2001, V
CE
 = 2V, 
I
C
 = 350mA 1000
C
I
Input capacitance 15  25 (1) pF
t
PLH
Turn-on delay time 0.5 V
I 
to 0.5V
O
0.25 1 (1) µs
t
PHL
Turn-off delay time 0.5 V
I 
to 0.5V
O
0.25 1 (1) µs
I
R
Clamp diode leakage current 
(Figure 9)
V
R 
= 50V 50 µA
T
J
 = 105°C, V
R
 = 50V 100
V
F
Clamp diode forward voltage 
(Figure 10)I
F
 = 350mA 1.7 2 V
1. Guaranteed by design.

ULQ2001, ULQ2003, ULQ2004 Electrical characteristics

Doc ID 1537 Rev 6 7/14

= -40 to 125 °C for SO16 unless otherwise specified.

Table 5. Electrical characteristics for ULQ2003D1013TRY (Automotive Grade)

Symbol Parameter Test conditions Min. Typ. Max. Unit

CEX

Output leakage current

(Figure 3)V

= 50V 50 µA

CE(SAT)

Collector-emitter saturation

voltage (Figure 5)

= 100mA, I

= 250µA 0.9 1.1

= 200mA, I

= 350µA 1.1 1.3

= 350mA, I

= 500µA 1.3 1.6

I(ON)

Input current (Figure 6)V

= 3.85V 0.93 1.35 mA

I(OFF)

Input current (Figure 7)I

= 500µA 50 65 µA

I(ON)

Input voltage (Figure 8)

= 2V, I

= 200mA

= 2V, I

= 250mA

= 2V,I

= 300mA

2.4

2.7

Input capacitance 15 25 pF

PLH

Turn-on delay time 0.5 V

to 0.5V

0.25 1 µs

PHL

Turn-off delay time 0.5 V

to 0.5V

0.25 1 µs

Clamp diode leakage current

(Figure 9)V

= 50V 50 µA

Clamp diode forward voltage

(Figure 10)I

= 350mA 1.7 2 V

Test circuits ULQ2001, ULQ2003, ULQ2004

8/14 Doc ID 1537 Rev 6

5 Test circuits

Figure 3. Output leakage current Figure 4. Output leakage current (for

ULN2002 only)

Figure 5. Collector-emitter saturation voltage Figure 6. Input current (ON)

Figure 7. Input current (OFF) Figure 8. Input voltage

ULQ2001, ULQ2003, ULQ2004 Test circuits

Doc ID 1537 Rev 6 9/14

Figure 9. Clamp diode leakage current Figure 10. Clamp diode forward voltage

Package mechanical data ULQ2001, ULQ2003, ULQ2004

10/14 Doc ID 1537 Rev 6

6 Package mechanical data

In order to meet environmental requirements, ST offers these devices in different grades of

ECOPACK® packages, depending on their level of environmental compliance. ECOPACK®

specifications, grade definitions and product status are available at: www.st.com.

ECOPACK® is an ST trademark.

ULQ2001, ULQ2003, ULQ2004 Package mechanical data

Doc ID 1537 Rev 6 11/14

Dim.

mm. inch.

Min. Typ. Max. Min. Typ. Max.

a1 0.51 0.020

B 0.77 1.65 0.030 0.065

b0.5 0.020

b1 0.25 0.010

D200.787

E8.5 0.335

e 2.54 0.100

e317.780.700

F 7.1 0.280

I 5.1 0.201

L3.30.130

Z 1.27 0.050

Plastic DIP-16 (0.25) mechanical data

P001C

Package mechanical data ULQ2001, ULQ2003, ULQ2004

12/14 Doc ID 1537 Rev 6

OUTLINE AND

MECHANICAL DATA

DIM.

mm inch

MIN. TYP. MAX. MIN. TYP. MAX.

A 1.75 0.069

a1 0.1 0.25 0.004 0.009

a2 1.6 0.063

b 0.35 0.46 0.014 0.018

b1 0.19 0.25 0.007 0.010

C 0.5 0.020

c1 45°(typ.)

(1)

9.8 10 0.386 0.394

E 5.8 6.2 0.228 0.244

e 1.27 0.050

e3 8.89 0.350

(1)

3.8 4.0 0.150 0.157

G 4.60 5.30 0.181 0.208

L 0.4 1.27 0.150 0.050

M 0.62 0.024

S8° (max.)

(1) "D" and "F" do not include mold flash or protrusions - Mold

flash or protrusions shall not exceed 0.15mm (.006inc.)

SO16 (Narrow)

0016020 D

ULQ2001, ULQ2003, ULQ2004 Revision history

Doc ID 1537 Rev 6 13/14

7 Revision history

Table 6. Document revision history

Date Revision Changes

05-Dec-2006 2 Order codes updated.

23-May-2007 3 Order codes updated.

17-Apr-2008 4 Added new order codes for Automotive grade products see Table 1 on page 1.

25-Aug-2008 5 Modified: Table 4 on page 6 and Table 5 on page 7.

11-Feb-2011 6 Modified: T

= -25 to 105 °C Table 4 on page 6.

ULQ2001, ULQ2003, ULQ2004

14/14 Doc ID 1537 Rev 6

Please Read Carefully:

Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the

right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any

time, without notice.

All ST products are sold pursuant to ST’s terms and conditions of sale.

Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no

liability whatsoever relating to the choice, selection or use of the ST products and services described herein.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this

document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products

or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such

third party products or services or any intellectual property contained therein.

UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED

WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED

WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS

OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.

UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT

RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING

APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,

DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE

GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.

Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void

any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any

liability of ST.

ST and the ST logo are trademarks or registered trademarks of ST in various countries.

Information in this document supersedes and replaces all information previously supplied.

The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.

STMicroelectronics group of companies

Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -

Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America