ARCOTRONICS Taped Fig.2 Fig.1 R.41 Y2 / X1 CLASS (EN132400) MKP Series METALLIZED POLYPROPYLENE FILM CAPACITOR SELF-HEALING PROPERTIES Typical applications: Interference suppression and across-the-line and line to ground applications. Suitable for use in situations where failure of the capacitor could lead to danger of electric shock. PRODUCT CODE: R41 Note: R.41 series has replaced the R73 series (available only upon request). For new design we suggest the use of the R.41 series. p=10 15<p<27.5 @d +0.05 p=375 0.6 0.6 0.8 7 All dimensions are in mm. GENERAL TECHNICAL DATA Dielectric: polypropylene film. Plates: metal layer deposited by evaporation under vacuum. Winding: non-inductive type. Leads: tinned wire. Protection: plastic case, epoxy resin filled. Box material is solvent resistant and flame retardant according to UL94 VO. Marking : Manufacturer's logo, series, capacitance, tolerance, rated voltage, capacitor class, dielectric code, climatic category, passive flammability category, manufacturing date code, approvals, manufacturing plant. Climatic category: 40/110/56 IEC 60068-1 Operating temperature range: -40 to+110C Related documents: IEC 60384-14, EN132400. ELECTRICAL CHARACTERISTICS Rated voltage (Vp): 300Vac; 50/60Hz Capacitance range: 0.001uF to 1.0uF Capacitance values: E6 series (IEC 60063 Norm). Capacitance tolerances (measured at 1 kHz): + 10% (K); 20% (M). Dissipation factor (DF): tg x 104 at +25C +5C: * Typical value Insulation resistance: Test conditions <20 (15)* at 1kHz Temperature: 425C +5C Voltage charge time: 1 min Voltage charge: 100 Vdc Performance 2=1x105MQ (5x105MQ)* forC <0.33uF 230000s (150000s)* forC >0.33uF * Typical value Test voltage between terminations (on all pieces): 2500Vac for 1s + 5000Vdc fori s at+25C+5C Winding scheme 300Vac single sided metallized polypropylene film 120 TEST METHOD AND PERFORMANCE Damp heat, steady state: Test conditions Temperature: +40 42C Relative humidity (RH): 93 +2% Test duration: 56 days Performance Dielectric strength: no dielectric breakdown or flashover at 1500Vac/1 min Capacitance change |AC/CI: =5% Insulation resistance: 250% of initial limit. Endurance: Test conditions Temperature: 110C +2C Test duration: 1000 h Voltage applied: Performance Dielectric strength: 1.7XVp_+ 1000Vac 0.1 s/h no dielectric breakdown or flashover at 1500Vac/1 min Capacitance change | AC/C!: < 10% Insulation resistance: > 50% of initial fimit. Resistance to soldering heat: Test conditions Solder bath temperature: +260C 45C Dipping time (with heat screen):10s+1s Performance Capacitance change |AC/CI: <2% APPROVALS 03 . KE eo song 14 Class Y2/X1__ | File No. V4160 Across-the-line CSA C22.2 N1 or line-to-ground File No. LR83890 Across-the-line UL 1414 or line-to-ground File No. E 97797 AS & CSA and UL 1414 for 250Vac only. Approved according to IEC 60384-14:1993+ A1:1995 (EN132400:1994+A2:1998+A3:1998). According to IEC 60065. GB IT 14472-1998 Class Y2/X1 File No.pending (*) ENEC mark has replaced all the following European National marks: & O08 MH OO 02/2003R.41 Y2 /X1 CLASS (EN132400) MKP Series METALLIZED POLYPROPYLENE FILM CAPACITOR SELF-HEALING PROPERTIES Typical applications: Interference suppression and across-the-line and line to ground applications. Suitable for use in situations where failure of the capacitor could lead to danger of electric shock. PRODUCT CODE: R41 Table 1 (for more detailed information, please refer to page 16). Co 300 Vac ve Ovo Part Number B H L p (V/s) 1000 pF 4.0] 9.0 | 13.0 110.0 800 R413F 1100 - - 00 - 1500 pF | 4.0] 9.0 | 13.0 | 10.0 800 R413F 1150 - - 00 - 2200 pF 4.0) 9.0 | 13.0 | 10.0 800 R413F 1220 --00- 3300 pF {| 5.0 | 11.0 | 13.0 ) 10.0 800 R413F 1330 - - 00 - 4700 pF 5.0 | 11.0 | 13.0 | 10.0 800 R413F 1470--M1iM 4700 pF 6.0 | 12.0 | 13.0 | 10.0 800 R413F 1470 - - 00 - 6800 pF 6.0 | 12.0 | 13.0 | 10.0 800 R413F 1680 - - 00 - 0.010 pF 5.0 | 11.0 | 18.0 | 15.0 600 R413i 2100 - - 00 - 0.015 uF 6.0 | 12.0 | 18.0 | 15.0 600 R413 2150 - - 00 - 0.022 uF | 7.5 | 13.5 | 18.0 | 15.0 600 R413] 2220 - - 00 - 0.033 nF 8.5 | 14.5 | 18.0 | 15.0 600 R413! 2330 - - 00 - 0.047 uF | 10.0 | 16.0 | 18.0 | 15.0 600 R4131 2470--00- 0.047 uF 6.0 | 15.0 | 26.5 | 22.5 500 R413N 2470 - - 00 - 0.068 uF | 7.0 | 16.0 | 26.5 | 22.5 500 R413N 2680 - - 00 - 0.10 uF | 10.0 | 18.5 | 26.5 | 22.5 500 R413N 3100--00- 0.15 uF | 11.0 | 20.0 | 26.5 | 22.5 500 R413N 3150 - - 00 - 0.22 uF | 13.0 | 22.0 | 26.5 | 22.5 500 R413N 3220 - - 00 - 0.22 uF 1 13.0 | 22.0 | 32.0 } 27.5 400 R413R 3220 - - OOM 0.33 KF | 14.0 | 28.0 | 32.0 | 27.5 400 R413R 3330 - - 00 - 0.47 uF | 18.0 | 33.0 | 32.0 | 27.5 400 R413A 3470 - - 00- 0.68 uF | 18.0 | 33.0 | 32.0 | 27.5 400 R413R 3680 - - 00 - 0.47 pF | 13.0 | 24.0 | 41.5 | 37.5 300 R413W3470 - - 00 - 0.68 uF | 16.0 | 28.5 | 41.5 } 37.5 300 R413W3680 - - 00 - 1.0uF | 20.0 | 40.0 | 41.5 | 37.5 300 R413W4100 - - 00 - Mechanical version and packaging (Table 1) Tolerance: K (+ 10%); M (+20%) Ei2 Series available upon request All dimensions are in mm. Standard Lead. Tapingstyle =| Ordering packaging style | length code | Pp | Fig. Pitch | igi Digit 10 to 11 | emmy fame | tN) | rm | ORTHO AMMO-PACK 142.70 1 40.0/15.0 batC*d AMMQ-PACK 19.05, 2 22.5 | ba REEL @ 355mm 142.70] 1 10.050! CK | | [REEL & 500mm 19.05 2 22.5/27.5 CK Loose,shortleads | 4 | | |. a ~ 00 Loose, long leads | 2 44 (p=10mm) 5 | | JY | Loose, longleads [ 95, +2/-1 | | 50 =1 30 +5 i 40 | foeimm Note: Ammo-pack is the preferred packaging for taped version 121 02/2003