MX856/MX857 Single Driver for Attenuators and GaAs FET Switches INTEGRATED CIRCUITS DIVISION Characteristics Description Parameter Rating Units Output Voltage 20 V Output Rise Time 5 ns Output Fall Time 5 ns The MX856 and MX857 are high speed, single-channel level shifters with complementary output drivers. The MX856 features a 5.0V VCC positive supply, and the MX857 features a 3.3V VCC positive supply. The input buffers accept digital TTL or CMOS level signals, amplifies them to the VCC and GND supply rails, and generates complementary outputs. The translator level shifts these output signals by amplifying them to the VCC and VEE supply rails. Features * * * * * * * * CMOS Technology TTL/CMOS Compatible Inputs Low Switching Noise 5nS Typical True / Complement Output Skew 5nS Typical Output Rise and Fall Times Up to 20V Output Voltage Output High Voltage Programmable Via VOPT Output Low Voltage Programmable Via VEE The output drivers then buffer the signals to VOPT and VEE. VOPT may be set within the range of VCC and GND. The output drivers also adjust the complementary signals for minimized skew error. Applications * Digital Control of Analog Circuits * Level Shifting and Amplification * Circuit Applications Requiring Complementary Signal Generation with Low Skew * Bias Control for PIN Diode Drivers in a Microwave Switch e3 Pb The MX856 and MX857 are designed to operate over a temperature range of -40C to +85C, and are available in an 8-lead SOIC package. Ordering Information Part Description MX856B 8-Lead SOIC (100/Tube) MX856BTR 8-Lead SOIC, Tape&Reel (1000/Reel) MX857B 8-Lead SOIC (100/Tube) MX857BTR 8-Lead SOIC, Tape&Reel (1000/Reel) Functional Block Diagram Input Buffer VCC VCC Translator Output Buffer VOPT VCC OUT IN OUT_B GND GND DS-MX856/MX857-R01 VEE VEE www.ixysic.com 1 MX856/MX857 INTEGRATED CIRCUITS DIVISION 1. Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1 Package Pinout. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2 Pin Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.3 Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.4 MX856: Guaranteed Operating Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5 MX857: Guaranteed Operating Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.6 DC Electrical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.7 ESD Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.8 AC Electrical Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 3 3 3 4 4 4 5 5 2. Manufacturing Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.1 Moisture Sensitivity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2 ESD Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.3 Reflow Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.4 Mechanical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 6 6 6 7 2 www.ixysic.com R01 MX856/MX857 INTEGRATED CIRCUITS DIVISION 1 Specifications 1.2 Pin Description 1.1 Package Pinout OUT 1 8 OUT_B Pin# Name 1 OUT Output Driver 2 GND VCC Ground Input Buffer 3 Description Positive Supply for Input Buffer GND 2 7 GND 4 VCC 3 6 VOPT 5 IN VEE 4 5 6 IN VEE VOPT Positive Supply for Output Driver 7 GND Ground 8 OUT_B Negative Supply for Output Driver Complementary Output Driver 1.3 Absolute Maximum Ratings Parameter Symbol Min Positive DC Supply Voltage VCC Max Units -0.4 6 V Negative DC Supply Voltage VEE -17 0.4 V Output Positive DC Supply Voltage VOPT - 6 V Output Positive to Negative Supply Voltage VOPT -VEE -0.4 20 V Positive to Negative Supply Voltage VCC-VEE -0.4 14 V Positive to Output Supply Voltage VCC-VOPT V -0.4 VCC+0.4 DC Input Voltage VIN -0.4 VCC+0.4 V DC Input Current IIN -10 10 A C TA -40 85 Storage Temperature TSTG -65 150 C ESD Sensitivity (Human Body Model) ESD 1.0 - kV Operating Temperature Absolute maximum electrical ratings are at 25C Absolute maximum ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. R01 www.ixysic.com 3 MX856/MX857 INTEGRATED CIRCUITS DIVISION 1.4 MX856: Guaranteed Operating Range Parameter Symbol Min Max Units Positive DC Supply Voltage VCC 3 5.5 V Negative DC Supply Voltage VEE -15 -4.5 V Output Positive DC Supply Voltage VOPT 0 5.5 V Output Positive to Negative Supply Voltage VOPT -VEE 7.5 20 V Positive to Negative Supply Voltage VCC-VEE 7.5 20 V Positive to Output Supply Voltage VCC-VOPT 0 VCC V Operating Temperature TA -40 85 C Input Rise and Fall Time TR, TF 0 500 ns Symbol Min Max Units Positive DC Supply Voltage VCC 3 3.6 V Negative DC Supply Voltage VEE -17 -4.5 V Output Positive DC Supply Voltage VOPT 0 3.6 V Output Positive to Negative Supply Voltage VOPT -VEE 7.5 20 V Positive to Negative Supply Voltage VCC-VEE 7.5 20 V Positive to Output Supply Voltage VCC-VOPT 0 VCC V Operating Temperature TA -40 85 C Input Rise and Fall Time TR, TF 0 500 ns 1.5 MX857: Guaranteed Operating Range Parameter 1.6 DC Electrical Characteristics Over guaranteed operating range. Parameter Conditions Symbol Min Typ Max Units Input High Voltage - VIH 2 - - V Input Low Voltage - VIL - - 0.8 V Output High Voltage (IOH=1mA) - VOH VOPT -0.1 - - V Output Low Voltage (IOL=1mA) - VOL - - VEE +0.1 V Input Current (VIN=0.0 to VCC) - IIN -10 - 10 A Supply Current (VIN=0 or VCC) VCC=3.3V - <1 - - <1 - - <1 - - <1 - - <1 - - <1 - VCC=5V Supply Current (VIN=0 or VCC) VCC=3.3V VCC=5V Supply Current (VIN=0 or VCC) VCC=3.3V VCC=5V 4 www.ixysic.com ICC IEE IOPT A R01 MX856/MX857 INTEGRATED CIRCUITS DIVISION 1.7 ESD Warning ESD (electrostatic discharge) sensitive device. Electrostatic charges can readily accumulate on test equipment and the human body in excess of 4000 Volts. This energy can discharge without detection. Although the MX856 / MX857 feature proprietary ESD protection circuitry, permanent damage may be sustained if subjected to high energy electrostatic discharges. Proper ESD precautions are recommended to avoid performance degradation or loss of functionality. 1.8 AC Electrical Characteristics VCC=VOPT=3.3V, VEE=-16.75V or -4.5V, input rise and fall times 6ns, VIN=3.1V, VIL=0.2V, TA=-40C to +85C VCC=VOPT=5V, VEE=-15V or -4.5V, input rise and fall times 6ns, VIN=4.8V, VIL=0.2V, TA=-40C to +85C Parameter Conditions Symbol VCC=3.5V Propagation Delay (Low to High Input) VCC=3.5V VCC=3.5V VCC=3.5V VCC=3.5V VCC=5.0V Input Capacitance - - 24 29 - 20 29 - 20 29 - 5 9 - 4 9 - 5 8 - 4 8 - 5 10 - 5 10 - - 15 CIN 90% 90% 50% 50% 10% Thl 90% OUT pF Tskew Tphl 10% Tplh Tskew Tphl 90% 50% 90% 50% 10% 10% Thl VEE VOPT Tlh www.ixysic.com VOPT 90% 50% 50% 10% Tplh R01 ns 10% Tlh OUTB Units 6ns VCC-0.2V 0.2V 29 TSKEW 6ns IN 22 TTHL VCC=5.0V Delay Skew (Output A to Output B) - TTLH VCC=5.0V Output Fall Time (CLD=10pF) Max TPHL VCC=5.0V Output Rise Time (CLD=10pF) Typ TPLH VCC=5.0V Propagation Delay (High to Low Input) Min VEE 5 MX856/MX857 INTEGRATED CIRCUITS DIVISION 2 Manufacturing Information 2.1 Moisture Sensitivity All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033. Device Moisture Sensitivity Level (MSL) Rating MX856B / MX857B MSL 1 2.2 ESD Sensitivity This product is ESD Sensitive, and should be handled according to the industry standard JESD-625. 2.3 Reflow Profile This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020 must be observed. Pb 6 Device Maximum Temperature x Time MX856B / MX857B 260C for 30 seconds e3 www.ixysic.com R01 MX856/MX857 INTEGRATED CIRCUITS DIVISION 2.4 Mechanical Dimensions 2.4.1 MX856B/MX857B 8-Lead SOIC Package 0.40 / 1.27 (0.016 / 0.050) 3.80 / 4.00* (0.150 / 0.157) 5.80 / 6.20 (0.228 / 0.244) 1.55 (0.061) 5.40 (0.213) PIN 1 1.27 BSC (0.05 BSC) 0.33 / 0.51 (0.013 / 0.020) 0.25 / 0.50 @45 (0.010 / 0.020 @45) 0.60 (0.024) 0.19 / 0.25 (0.008 / 0.010) 4.80 / 5.00* (0.189 / 0.197) 0 / 8 Recommended PCB Land Pattern 0.10 / 0.25 (0.004 / 0.010) 1.35 / 1.75 (0.053 / 0.069) 0.53 REF (0.021 REF) 1.27 (0.050) Dimensions mm MIN / mm MAX (inches MIN / inches MAX) NOTES: (Unless otherwise specified) 1. Controlling dimensions: millimeters. 2. Dimensions (*) do not include mold protrusions. 3. Molded package shall conform to JEDEC standard configuration MS-012 variation AA. 2.4.2 MX856BTR/MX857BTR Tape & Reel Dimensions 4.00 0.10 (0.157 0.004) 2.00 0.10 (0.079 0.004) R0.5 TYP (R0.02 TYP) 330.2 DIA. (13.00 DIA.) 0.30 0.05 (0.012 0.002) B o1.55 0.05 (o0.061 0.002) B0=5.20 0.10 (B0=0.205 0.004) Top Cover Tape Thickness 0.066 MAX. (0.0026 MAX.) 5.50 0.10 (0.217 0.004) 3.40 REF (0.134 REF) A 1.80 0.10 (0.071 0.004) K0=2.30 0.10 (K0=0.091 0.004) Embossed Carrier 1.75 0.10 (0.205 0.069) Section B-B 12.00 0.30 (0.472 0.012) A 8.00 0.10 (0.315 0.004) B o1.50 MIN (o0.059 MIN) A0=6.40 0.10 (A0=0.252 0.004) 4.70 REF (0.185 REF) 1.20 REF (0.047 REF) 70 Embossment DIMENSIONS mm (inches) NOTES: 1. A0 and B0 measured at 0.3mm above base of pocket. 2. 10 pitches cumulative tol. 0.2mm. Section A-A For additional information please visit our website at: www.ixysic.com IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated Circuits Division's Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-MX856/MX857-20110729 (c)Copyright 2012, IXYS Integrated Circuits Division All rights reserved. Printed in USA. 12/22/2012 R01 www.ixysic.com 7