NTR4171P Power MOSFET -30 V, -3.5 A, Single P-Channel, SOT-23 Features * * * * Low RDS(on) at Low Gate Voltage Low Threshold Voltage High Power and Current Handling Capability This is a Pb-Free Device http://onsemi.com V(BR)DSS Applications * Load Switch * Optimized for Battery and Load Management Applications in -30 V Portable Equipment like Cell Phones, PDA's, Media Players, etc. Symbol Value Unit Drain-to-Source Voltage VDSS -30 V Gate-to-Source Voltage VGS 12 V Continuous Drain Current (Note 1) Power Dissipation (Note 1) Steady State TA = 25C -2.2 TA = 85C -1.5 t5s TA = 25C Steady State ID 75 mW @ -10 V -2.2 A 110 mW @ -4.5 V -1.8 A 150 mW @ -2.5 V -1.0 A S G A D -3.5 0.48 TA = 25C PD t5s Pulsed Drain Current ID MAX P-CHANNEL MOSFET MAXIMUM RATINGS (TJ = 25C unless otherwise noted) Parameter RDS(on) MAX W 1.25 3 IDM -15.0 TJ, Tstg -55 to 150 C Source Current (Body Diode) IS -1.0 A Lead Temperature for Soldering Purposes (1/8 from case for 10 s) TL 260 C tp = 10 ms Operating Junction and Storage Temperature A Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. THERMAL RESISTANCE RATINGS Parameter Symbol Max Unit C/W Junction-to-Ambient - Steady State (Note 1) RqJA 260 Junction-to-Ambient - t 10 s (Note 1) RqJA 100 MARKING DIAGRAM/ PIN ASSIGNMENT 1. Surface-mounted on FR4 board using 1 in sq pad size (Cu area = 1.127 in sq [2 oz] including traces) 3 Drain 1 2 SOT-23 CASE 318 STYLE 21 TRFMG G 1 Gate 2 Source TRF = Specific Device Code M = Date Code G = Pb-Free Package (Note: Microdot may be in either location) ORDERING INFORMATION Device Package Shipping NTR4171PT1G SOT-23 (Pb-Free) 3000/Tape & Reel NTR4171PT3G SOT-23 (Pb-Free) 10000/Tape & Reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D. (c) Semiconductor Components Industries, LLC, 2010 May, 2010 - Rev. 1 1 Publication Order Number: NTR4171P/D NTR4171P MOSFET ELECTRICAL CHARACTERISTICS (TJ = 25C unless otherwise noted) Parameter Symbol Test Condition Min Typ Max Units Drain-to-Source Breakdown Voltage V(BR)DSS VGS = 0 V, ID = -250 mA -30 Drain-to-Source Breakdown Voltage Temperature Coefficient V(BR)DSS /TJ ID = -250 mA, Reference to 25C Zero Gate Voltage Drain Current IDSS VGS = 0 V, VDS = -24 V, TJ = 25C VGS = 0 V, VDS = -24 V, TJ = 85C -1.0 -5.0 mA Gate-to-Source Leakage Current IGSS VDS = 0 V, VGS = "12 V 0.1 mA VGS(TH) VGS = VDS, ID = -250 mA OFF CHARACTERISTICS V 24 mV/C ON CHARACTERISTICS (Note 3) Gate Threshold Voltage Negative Threshold Temperature Coefficient -0.7 VGS(TH)/TJ Drain-to-Source On-Resistance -1.4 3.5 RDS(on) Forward Transconductance -1.15 gFS V mV/C VGS = -10 V, ID = -2.2 A 50 75 VGS = -4.5 V, ID = -1.8 A 60 110 VGS = -2.5 V, ID = -1.0 A 90 150 VDS = -5.0 V, ID = -2.2 A 7.0 S 720 pF mW CHARGES, CAPACITANCES AND GATE RESISTANCE Input Capacitance Ciss Output Capacitance Coss Reverse Transfer Capacitance Crss VGS = 0 V, f = 1.0 MHz, VDS = -15 V 95 65 Total Gate Charge QG(TOT) Threshold Gate Charge QG(TH) Gate-to-Source Charge QGS Gate-to-Drain Charge QGD 2.6 Total Gate Charge QG(TOT) 7.4 Threshold Gate Charge QG(TH) 0.7 Gate-to-Source Charge QGS Gate-to-Drain Charge QGD 2.6 RG 6.1 W td(on) 8.0 ns tr 11 Gate Resistance 15.6 VGS = -10 V, VDS = -15 V, ID = -3.5 A VGS = -4.5 V, VDS = -15 V, ID = -3.5 A nC 0.7 1.6 nC 1.6 SWITCHING CHARACTERISTICS, VGS = 4.5 V (Note 4) Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time td(off) VGS = -10 V, VDS = -15 V, ID = -3.5 A, RG = 6 W 32 tf 14 td(on) 9.0 tr td(off) VGS = -4.5 V, VDS = -15 V, ID = -3.5 A, RG = 6 W tf ns 16 25 22 DRAIN-SOURCE DIODE CHARACTERISTICS Forward Diode Voltage VSD Reverse Recovery Time tRR Charge Time ta Discharge Time tb Reverse Recovery Charge VGS = 0 V, IS = -1.0 A, TJ = 25C -0.8 14 VGS = 0 V, IS = -1.0 A, dISD/dt = 100 A/ms QRR http://onsemi.com 2 V ns 10 4.0 8.0 2. Surface-mounted on FR4 board using 1 in sq pad size (Cu area = 1.127 in sq [2 oz] including traces) 3. Pulse Test: Pulse Width v 300 ms, Duty Cycle v 2% 4. Switching characteristics are independent of operating junction temperatures -1.2 nC NTR4171P TYPICAL CHARACTERISTICS 10 10 -4.5 V 6.0 5.0 -2.2 V 4.0 3.0 VGS = -2.0 V 2.0 0 0.5 1.0 1.5 2.0 2.5 3.5 3.0 4.0 4.5 5.0 7.0 6.0 5.0 TJ = 25C 4.0 3.0 2.0 TJ = 125C 1.0 1.25 1.5 TJ = -55C 1.75 2.0 2.25 2.75 2.5 -VDS, DRAIN-TO-SOURCE VOLTAGE (V) -VGS, GATE-TO-SOURCE VOLTAGE (V) Figure 1. On-Region Characteristics Figure 2. Transfer Characteristics 0.30 TJ = 25C ID = -2.2 A 0.25 0.20 0.15 0.10 0.05 0 VDS = -5 V 8.0 1.0 0 RDS(on), DRAIN-TO-SOURCE RESISTANCE (W) RDS(on), DRAIN-TO-SOURCE RESISTANCE (W) -ID, DRAIN CURRENT (A) 7.0 1.0 0 RDS(on), NORMALIZED DRAIN-TO-SOURCE RESISTANCE (W) -2.5 V -10 V 8.0 9.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10 3.0 0.30 -2.0 V -2.2 V TJ = 25C 0.25 0.20 -2.5 V 0.15 0.10 -4.5 V 0.05 0 VGS = -10 V 0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10 -VGS, GATE VOLTAGE (V) -ID, DRAIN CURRENT (A) Figure 3. On-Resistance vs. Gate-to-Source Voltage Figure 4. On-Resistance vs. Drain Current and Gate Voltage 10,000 1.6 1.5 1.4 VGS = -4.5 V ID = -2.2 A IDSS, LEAKAGE (nA) -ID, DRAIN CURRENT (A) 9.0 1.3 TJ = 150C 1000 1.2 1.1 1.0 0.9 TJ = 125C 100 0.8 0.7 0.6 -50 -25 0 25 50 75 100 125 10 150 0 5.0 10 15 20 25 TJ, JUNCTION TEMPERATURE (C) -VDS, DRAIN-TO-SOURCE VOLTAGE (V) Figure 5. On-Resistance Variation with Temperature Figure 6. Drain-to-Source Leakage Current vs. Voltage http://onsemi.com 3 30 NTR4171P VGS = 0 V TJ = 25C f = 1 MHz Ciss 800 700 600 500 400 300 Coss 200 100 C rss 0 0 t, TIME (ns) 1000 5.0 10 15 20 25 30 -VDS -VGS 12 8.0 10 8.0 6.0 4.0 VDS = -15 V TJ = 25C ID = -3.5 A QGD QGS 6.0 4.0 2.0 0 2.0 0 2.0 4.0 6.0 8.0 10 12 0 16 14 QG, TOTAL GATE CHARGE (nC) Figure 7. Capacitance Variation Figure 8. Gate-to-Source and Drain-to-Source Voltage vs. Total Charge 10 VGS = -10 V VDD = -15 V ID = -3.5 A td(off) tf tr 10 td(on) 1.0 10 TJ = 125C 100 TJ = 150C 1.0 TJ = 25C 0.1 TJ = -55C 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 RG, GATE RESISTANCE (W) -VSD, SOURCE-TO-DRAIN VOLTAGE (V) Figure 9. Resistive Switching Time Variation vs. Gate Resistance Figure 10. Diode Forward Voltage vs. Current 1.5 30 1.4 ID = -250 mA 25 1.3 1.2 POWER (W) -VGS(th) (V) 14 -VDS, DRAIN-TO-SOURCE VOLTAGE (V) 100 1.0 16 QT 10 -IS, SOURCE CURRENT (A) C, CAPACITANCE (pF) 900 12 1.1 1.0 0.9 0.8 20 15 10 5.0 0.7 0.6 -50 -VDS, DRAIN-TO-SOURCE VOLTAGE (V) 1100 1000 -VGS, GATE-TO-SOURCE VOLTAGE (V) TYPICAL CHARACTERISTICS -25 0 25 50 75 100 125 0 150 0.001 0.01 0.1 1.0 10 100 TJ, TEMPERATURE (C) SINGLE PULSE TIME (s) Figure 11. Threshold Voltage Figure 12. Single Pulse Maximum Power Dissipation http://onsemi.com 4 1000 NTR4171P TYPICAL CHARACTERISTICS -ID, DRAIN CURRENT (A) 100 10 VGS = -12 V Single Pulse TC = 25C 10 ms 100 ms 1.0 1 ms 10 ms 0.1 0.01 RDS(on) Limit Thermal Limit Package Limit 0.1 1.0 dc 10 100 -VDS, DRAIN-TO-SOURCE VOLTAGE (V) R(t), EFFECTIVE TRANSIENT THERMAL RESPONSE (NORMALIZED) Figure 13. Maximum Rated Forward Biased Safe Operating Area 1.0 Duty Cycle = 0.5 0.2 0.1 0.01 0.1 0.05 0.02 0.01 Single Pulse 0.0001 0.001 0.01 0.1 1.0 t, TIME (s) Figure 14. FET Thermal Response http://onsemi.com 5 10 100 1000 NTR4171P PACKAGE DIMENSIONS SOT-23 (TO-236) CASE 318-08 ISSUE AP NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. 4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR GATE BURRS. D SEE VIEW C 3 HE E DIM A A1 b c D E e L L1 HE q c 1 2 e b 0.25 q A L A1 MIN 0.89 0.01 0.37 0.09 2.80 1.20 1.78 0.10 0.35 2.10 0 MILLIMETERS NOM MAX 1.00 1.11 0.06 0.10 0.44 0.50 0.13 0.18 2.90 3.04 1.30 1.40 1.90 2.04 0.20 0.30 0.54 0.69 2.40 2.64 --- 10 MIN 0.035 0.001 0.015 0.003 0.110 0.047 0.070 0.004 0.014 0.083 0 INCHES NOM 0.040 0.002 0.018 0.005 0.114 0.051 0.075 0.008 0.021 0.094 --- MAX 0.044 0.004 0.020 0.007 0.120 0.055 0.081 0.012 0.029 0.104 10 STYLE 21: PIN 1. GATE 2. SOURCE 3. DRAIN L1 VIEW C SOLDERING FOOTPRINT 0.95 0.037 0.95 0.037 2.0 0.079 0.9 0.035 SCALE 10:1 0.8 0.031 mm inches *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 http://onsemi.com 6 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative NTR4171P/D