1 of 4 3
3M Heat Shrink Tubing FP-301
Flexible, Polyolefin
Data Sheet May 2017
Description
3M™ Heat Shrink Tubing 3M FP-301 offers an excellent balance of electrical,
physical and chemical properties for a wide variety of industrial and military
applications. Rated for 135°C continuous operation, all 3M FP-301 tubing is split
resistant, mechanically tough, easily marked and resists cold flow.
3M FP-301 tubing is rated for continuous operation at -55°C (-67°F) to 135°C
(275°F), and is designed to withstand elevated temperatures to 300°C (572°F) for
short periods. Minimum shrink temperature for all 3M FP-301 tubing is 100°C
(212°F).
Agency Approvals &
Self Certifications
Meets requirements of:
SAE-AMS-DTL-23053/5, Class 1, Class 2 (Clear)*
AMS-3636, AMS-3637
UL Recognized, File E-39100, at 600 volts maximum @ 125°C
CSA Certified, CSA LR38227, at 600 volts maximum @ 125°C
*Formerly MIL-I-23053/5 and MIL-DTL-23053/5
For RoHS information, please visit www.3M.com/ROHS
Applications
3M FP-301 tubing is typically used as a shrink-fit electrical insulation over cable
splices and terminations. It is also used for lightweight wire harness covering, wire
marking, wire bundling, component packaging and fire-resistant covering.
Shrink Ratio
3M FP-301 tubing has a 2:1 shrink ratio. When freely recovered, the tubing will shrink
to 50% of its as-supplied internal diameter. The recovered wall thickness is
proportional to the degree of recovery.
3M™ Heat Shrink Tubing FP-301
2 of 4
Standard Sizes and
Dimensions
Ordering
Size
(Nominal)
Expanded I.D.
(Minimum)
In. (mm)
Recovered I.D.
(Maximum
In. (mm)
Recovered Wall Thickness
(Nominal)
In. (mm)
3/64 .046 (1,17) .023 (0,58) .016 (0,41)
1/16 .063 (1,60) .031 (0,79) .017 (0,43)
3/32 .093 2,36) .046 (1,17) .020 (0,51)
1/8 .125 (3,18) .062 (1,57) .020 (0,51)
3/16 .187 (4,75) .093 (2,36) .020 (0,51)
1/4 .250 (6,35) .125 (3,18) .025 (0,64)
3/8 .375 (9,53) .187 (4,75) .025 (0,64)
1/2 .500 (12,70) .250 (6,35) .025 (0,64)
3/4 .750 (19,05) .375 (9,53) .030 (0,76)
1 1.000 (25,40) .500 (12,70) .035 (0,89)
1-1/2 1,500 (38,10) .750 (19,05) .040 (1,02)
2 2.000 (50,80) 1.000 (25,40) .045 (1,14)
3 3.000 (76,20) 1.500 (38,10) .050 (1,27)
4 4.000 (101,60) 2.000 (50,80) .055 (1,40)
3M™ Heat Shrink Tubing FP-301
3 of 4
Typical Properties
Not for specifications. Values are typical, not to be considered minimum or maximum.
Properties measured at room temperature 73°F (23°C) unless otherwise stated.
Physical Property Typical Value
US units (metric)
Tensile Strength 2400 psi
Ultimate Elongation 400%
Longitudinal Change ±5%
Secant Modulus (2%) 13,000 psi
Specific Gravity 1.3 (Opaque)
.93 (Clear)
Operating Temperature -67° to 275°F (-55° to +135°C)
Shrink Temperature (minimum) 212°F (100°C)
Heat Aging (336 hrs. @ 175° C) Elongation 175%
Heat shock (4 hrs. @ 250° C) No dripping, flowing, cracking,
passes mandrel wrap test
Low Temperature Flexibility
(4 hrs @ -55° C) No cracking
Scant Modules (2%) 13,000 psi
Flammability
Self-extinguish, Meets UL 224 All-Tubing
Flame Test (Except Clear)
Pass
Electrical Property (Test Method) Typical Value
Dielectric Strength 900 V/mil
Volume Resistivity 1015 ohm/cm
Chemical Property (Test Method) Typical Value
Corrosion Resistance (Copper mirror) Non-corrosive
Fungus Resistance Non-nutrient
Water Absorption 0.2%
Solvent Resistance Excellent
Standard Colors
Black, Clear
Also available in Blue, Green, Red, White and Yellow. Price, MOQ and Lead Time
will vary for these colors. Please contact Local Sales Representative or Customer
Service Representative for more information.
NOTE: The clear tubing is not flame retardant or UL listed.
3M™ Heat Shrink Tubing FP-301
4 of 4
3M is a trademark of 3M Company.
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on
information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this
product, you must evaluate it and determine if it is suitable for your intended application. You assume all
risks and liability associated with such use. Any statements related to the product, which are not
contained in 3M’s current publications, or any contrary statements contained on your purchase order,
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited
Remedy; Limited
Liability
This product will be free from defects in material and manufacture at the time of purchase. 3M MAKES
NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the
warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M
product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be
liable for any direct, indirect, special, incidental or consequential loss or damage arising from this 3M
product, regardless of the legal theory asserted.
3
Electrical Markets Division
6801 River Place Blvd.
Austin, TX 78726-9000
800 676.8381
FAX: 800 828 9329
www.3M.com/oem
Please recycle
© 3M 2017 All rights reserved
78-8131-7399-0
D
Shelf Life & Storage
3M™ Heat Shrink Tubing FP-301 has a 10-year shelf life from date of manufacture
when stored in a humidity controlled storage (10°C/50°F to 27°C/80°F and <75%
relative humidity).
Availability
Standard Packaging
Four-foot lengths, large spools (21” diameter) and small spools (8½” diameter).
Please contact your local distributor; available from 3M.com/oem [Where to Buy] or
call 1-800-676-8381.