RC1005F5622CS - SAMSUNG - searchdatasheet.com

Thick Film Chip Resistors (RC Series)

Specification Sheet

□Features

1. Small, thin and lightweight

2. High reliability

3. Applicable Both flow and reflow soldering.

4. Suitable size and package for surface mount assembly

5. RoHS Compliant.

□Part Number Description

□Structure and Dimension

* Jumper : ‘J’

Type (Series)

0603

Size

:mm

(inch)

Tolerance

103

Resistance Value

Packing Type

General

purpose

chip resistor

0402

(01005)

0603

(0201)

1005

(0402)

1608

(0603)

2012

(0805)

3216

(1206)

3225

(1210)

5025

(2010)

6432

(2512)

CS 7” reel

ES 10” reel

AS 13” reel

- 3-digit code

(E-24,E-96 series)

- 4-digit code

(E-96 series)

-Jumper : ‘000’

Size : mm L W T A B Weight(g/K)

RC0402 0.40±0.02 0.20±0.02 0.13±0.02 0.10±0.03 0.10±0.03

0.04mg

RC0603 0.60±0.03 0.30±0.03 0.23±0.03 0.10±0.05 0.15±0.05

0.15mg

RC1005 1.00±0.05 0.50±0.05 0.35±0.05 0.20±0.10 0.25±0.10

0.6mg

RC1608 1.60±0.10 0.80±0.10 0.45±0.10 0.30±0.20 0.35±0.10

2.1mg

RC2012 2.00±0.20 1.25±0.15 0.55±0.10 0.40±0.20 0.35±0.20

4.9mg

RC3216 3.20±0.20 1.60±0.15 0.55±0.10 0.45±0.20 0.40±0.20

9.5mg

RC3225 3.20±0.20 2.55±0.20 0.55±0.10 0.45±0.20 0.40±0.20

16mg

RC5025 5.00±0.20 2.50±0.20 0.55±0.10 0.60±0.20 0.60±0.20

26mg

RC6432 6.30±0.20 3.20±0.20 0.55±0.10 0.60±0.20 0.60±0.20

41mg

[ Unit : mm ]

±0.5%

±1.0%

J±5.0%

Thick Film Chip Resistors (RC Series)

□Applications and Ratings

1) The rated voltage should follow the formula 𝐸 = 𝑃 × 𝑅

In case the value exceeds the MWV, the MWV shall be regarded as the rated voltage

2) Moisture Level(1 Level)

3) *Max Working Voltage

4) **Max Overload Voltage

※ Please contact our sales representatives or engineers for other specifications

□Rated Voltage

1. The rated voltage for resistor can be a DC continuous working voltage or AC(rms) voltage in

commercial line frequency wave form at rated power. It can be expressed as below.

𝐸 = 𝑃 × 𝑅 E : Rated Voltage[V] P : Rated Power[W] R : Nominal Resistance[Ω]

If the value calculated by the equation exceeds Max working Voltage, the rated voltage is limited

to max working voltage. In other words, the lower value is the rated voltage.

ex) For RC1608 Series [ P=0.1(W), Max working voltage = 50(V) ]

1) The rated voltage, when R=1KΩ 2) The rated voltage, when R=100KΩ

𝐸 = 0.1 × 1000 =10(𝑉) 𝐸 = 0.1 × 100000 =100(𝑉)

When the value is lower than MWV, When the value is higher than MWV,

The Rated voltage is 10(V) The Rated voltage is equal MWV, as 50(V)

2. When the rated voltage is applied to the resistor, check the ambient temperature and decrease

the lower according to the power derating curve.

3. If higher voltage than rated voltage, the reliability condition and performance cannot be

guaranteed.

4. If pulse wave is applied, the maximum pulse power should be below the rated voltage.

Type Rated

Power [W]

*MWV

[V]

**MOV

[V]

Tolerance

[%]

T.C.R

[ppm/℃]

Resistance

Range [Ω]

Working

Temp. [℃]

RC0402 1/32 15 30 ±1.0(F)

±5.0(J)

±300

±250

1~99

100~1M -55~125

RC0603 1/20 25 50 ±300

±250

1~9.9

10~10M

RC1005 1/16 50 100

±0.5(D)

±1.0(F)

±5.0(J)

±300

±100

1~9.9

10~10M -55~155

RC1608 1/10 50 100

RC2012 1/8 150 200

RC3216 1/4 200 400

RC3225 1/3 200 400

RC5025 2/3 200 400

RC6432 1 200 400

Thick Film Chip Resistors (RC Series)

□Power Derating Curve

Rated power shall be the load power corresponding to nominal watt suitable for continuous use at

70±2℃ ambient temperature, In case the ambient temperature exceeds 70±2℃, reduce the load

power in accordance with the derating curve

□Jumper Ratings

□Standard Soldering Land Pattern

Size Reflow Soldering

Type mm inch A B 2A + B C

RC0402 0402 01005 0.17 0.20 0.54 0.18

RC0603 0603 0201 0.37 0.28 1.02 0.29

RC1005 1005 0402 0.60 0.50 1.70 0.50

RC1608 1608 0603 0.80 0.80 2.40 0.80

RC2012 2012 0805 0.90 1.40 3.20 1.20

RC3216 3216 1206 1.30 1.80 4.40 1.50

RC3225 3225 1210 1.30 1.80 4.40 2.40

RC5025 5025 2010 1.40 3.30 6.10 2.40

RC6432 6432 2512 1.40 4.60 7.40 3.00

[ Unit : mm ]

Type Rated

Current[A]

Max

Overload

Current[A]

Resista

-nce

[Ω]

Working

Temp

.[℃

]

0402

0603 0.5 1

Max

0.05

-55 ~

125

1005

1608 1 2

-55 ~

155

2012 2 5

3216

3225

5025

6432

210

1005 and

bigger sizes

0402,

0603

size

Thick Film Chip Resistors (RC Series)

□Performance characteristics

※The reliability test condition can be replaced by the corresponding accelerated test condition.

ITEM Requirements

Specification

Test Conditions

(JIS C 5201-1)

Resistance

DC resistance value should be

within the specified JIS C 5201-1 4.5

Voltage apply within 5sec

Temperature

Characteristic TCR should be within the

specified T.C.R JIS C 5201-1 4.8

+20℃ → -55℃/ +20℃ → +125℃

Short

time Overload △R should be within

±(1.0%+0.1Ω)

JIS C 5201-1 4.13

2.5 times of rated voltage

5sec, 1cycle

Solderability

New solder coated more than

95% of termination JIS C 5201-1 4.17

245+5/-0℃, 2±0.5 sec

Resistance

to Solder Heat ΔR should be within

±(1.0%+0.05Ω)

JIS C 5201-1 4.18

Flow : Max 10sec

(260℃, Both side dipping)

Reflow : Max 10sec(230℃↑, 30sec)

Temperature Cycle

ΔR should be within

±(1.0%+0.1Ω)

JIS C 5201-1 4.19

-55℃ ↔ +125℃, 100 cycle

Moisture Resistance

ΔR should be within

±(3.0%+0.1Ω)

JIS C 5201-1 4.24

Rated Voltage, 40±2℃, 90~95%RH,

1,000+48hours

90mins ON, 30mins OFF

Load Life

ΔR should be within

±(3.0%+0.1Ω)

JIS C 5201-1 4.25

Rated Voltage, 70±2℃, 1,000+48hours

90mins ON, 30mins OFF

High

Temperature Exposure ΔR should be within

±(3.0%+0.1Ω)

JIS C 5201-1 4.23

155±2℃, 1,000+48hours

Thick Film Chip Resistors (RC Series)

□Taping & Packing

1. Quantity per Reel

2. Cardboard(Paper) tape : 2mm pitch

※ According to normal size, we fill out A, B in the table above. The data may be varied with

special size tolerance.

Division Size (Inch) Thickness

Taping type

Pitch 7” Reel 10” Reel 13” Reel

Chip Resistor

0402 (01005)

0.13 mm Paper 1mm - - -

2mm 20K -80K

0603 (0201)

0.23 mm Paper 1mm - - 150K

2mm 15K -60K

1005 (0402)

0.35 mm Paper 2mm 10K 30K 40K

1608 (0603)

0.45 mm Paper 4mm 5K 10K 20K

2012 (0805)

0.55 mm Paper 4mm 5K 10K 20K

3216 (1206)

0.55 mm Paper 4mm 5K 10K 20K

3225 (1210)

0.55 mm Paper 4mm 5K 10K 20K

5025 (2010)

0.55 mm Embossed 4mm 4K -15K

6432 (2512)

0.55 mm Embossed 4mm 4K -15K

Size

(Inch) A B W F E P1 P2 P0 D t

0402

(01005) 0.24

±0.03

0.45

±0.03

8.00

±0.10

3.50

±0.05

1.75

±0.10

2.00

±0.05

2.00

±0.05

4.00

±0.10

1.50

+0.10

/-0.03

0.31

±0.02

0603

(0201) 0.38

±0.05

0.68

±0.05

0.42

±0.05

1005

(0402) 0.65

±0.10

1.15

±0.10

0.43

±0.07

[ Unit : mm ]

Thick Film Chip Resistors (RC Series)

3. Cardboard(Paper) tape : 4mm pitch

※ According to normal size, we fill out A, B in the table above. The data may be varied with

special size tolerance.

4. Embossed(Plastic) tape

※ According to normal size, we fill out A, B in the table above. The data may be varied with

special size tolerance.

Size

(Inch) A B W F E P1 P2 P0 D t

1608

(0603) 1.00

±0.20 1.90

±0.20

8.00

±0.10 3.50

±0.05 1.75

±0.10 4.00

±0.10 2.00

±0.05 4.00

±0.10 φ1.50

+0.10/-0.00

0.60

±0.10

2012

(0805) 1.65

±0.20 2.40

±0.20 0.75

±0.10

3216

(1206) 2.00

±0.20 3.60

±0.20 0.75

±0.10

3225

(1210) 2.90

±0.20 3.60

±0.20 0.75

±0.10

Size

(Inch) A B W F E P1 P2 P0 Dt1 T0

5025

(2010)

2.90

0.10

5.40

0.10

12.00

0.20

5.50

0.05

1.75

0.10

4.00

0.10

2.00

0.05

4.00

0.10

1.50

0.10

1.00

0.10

0.30

0.20

6432

(2512)

3.30

0.10

6.60

0.10

1.00

0.10

0.30

0.20

[ Unit : mm ]

Thick Film Chip Resistors (RC Series)

5. Reel Dimensions

Symbol

Tape Width

A B C D E W t

7” Reel

8mm φ180+0/-3 φ60±1.0 φ13.3±0.3 4±0.2 2.0±0.5 9±0.5 1.2±0.2

12mm φ180+0/-3 φ60±1.0 φ13.3±0.3 4±0.2 2.0±0.5 13±0.5 1.2±0.2

10”Reel

8mm φ258±3.0 φ81±1.0 φ13±0.3 4±0.2 2.0±0.5 9±0.5 1.8±0.2

12mm φ258±3.0 φ81±1.0 φ13±0.3 4±0.2 2.0±0.5 13±0.5 1.8±0.2

13”Reel

8mm φ330±2.0 φ100±1.0 φ13±0.5 4±0.2 3.3±0.5 9±0.5 2.2±0.2

12mm φ330±2.0 φ80±1.0 φ13±0.5 4±0.2 3.3±0.5 13±0.5 2.2±0.2

[ Unit : mm ]

Thick Film Chip Resistors (RC Series)

□Precautions for Product Safety

1. The products are designed and produced for general electronic devices applications.

User must contact our sales in-charge before using our products, if there is a risk to occur critical

issues, such as casualties due to breakdown or malfunction of devices from application on products

demanding high reliability or other safety devices, also for complicated products such as

medical equipment, transportation equipment, an aircraft/spacecraft, an atomic energy

controller, a fuel controller, automobile equipment, military equipment, disaster/crime preventive

equipment.

2. The products are designed for use in the standard environment. Do not use products in specific

environment that can affect a product performance. If you need to use products in the

following conditions, please contact our sales in-charge in advance.

①Various types of liquid including water, oil, organic solvent and other chemicals.

②Direct sunlight, outdoors, or atmosphere with an amount of dusts.

③An amount of corrosive gases such as sea breeze, Cl2, H2S, NH3, SO2, NO2, and etc.

④Strong static electricity or electromagnetic waves

⑤Heat-producing components or inflammable materials are close.

⑥A resistor is sealed or coated with materials such as synthetic resin, and etc.

⑦Water or water-soluble detergent is used for cleaning free soldering or flux coating after

⑧Condensation phenomenon occurs on the object.

⑨Out of the range from -55 °C to +155(125) °C

3. The products have no radiation resistance.

4. It is a must to notify the person in charge of sales of issues on product safety at any time.

In addition, a regular monitor for product safety should be conducted by customers.

□Precautions regarding the use of products.

1. Product characteristics must be evaluated on a board mounted.

2. When transitory load is used in which short-time load is applied such as pulse, a resistor should

be tested on a board mounted. If load is higher than rated voltage under the load conditions at

continuous steps, it causes damages on characteristics or reliability of the resistor. Therefore,

when load exceed the rated voltage, it is not allowed to apply.

3. It is not recommended to use halogen products such as chlorine (Cl), bromine (Br), etc. or

fluxes that are highly active due to the residue that is able to affect the characteristics or

reliability of a resistor.

4. Be careful with the soldering condition to avoid the Ag-solder penetration problems.

Thick Film Chip Resistors (RC Series)

5. When soldering manually, do not touch a resistor body with the edge of soldering iron directly.

When working with a soldering iron at high temperature, please be done with the work as

quick as possible.

6. Physical shocks to the resistor can cause the breaking of protective layers of the product and

affect its characteristic adversely. Therefore, use caution when picking and moving Chip-R with

hard instruments such as metal tweezers in order to avoid damages on a resistor or

degradation of product performance degradation.

7. Do not soak the resistor in a solvent for a long time. Also, the effect of solvent must be

checked prior to use.

8. Place products carefully to keep the standard temperature range in the category, otherwise

increasing temperature caused by adjacent heat-generating components can exceed the

temperature range. In addition, do not place or install heat-emitting components or flammable

materials such as plastic coating wires near these products.

9. Safety can be guaranteed only when average power is lower than rated power, and if power

exceeding the rated power is applied, please make sure to make an inquire on surge voltage or

a current waveform for a short time.

□Recommendation for temperature/humidity

Even taping and packaging materials are designed to endure a long-term storage, they should

be stored with a temperature of 0~40°C and an RH of 0~70% otherwise, too high temperatures

or humidity may deteriorate the quality of the product rapidly.

As oxidization is accelerated when relative humidity is above 70%RH, the lower the humidity is,

the better the solderability is.

As the temperature difference may cause dew condensation during the storage of the product,

it is a must to maintain a temperature control environment.

□Shelf life

An allowable storage period should be within 6 months from the outgoing date of delivery in

consideration of solderability.

It can be stored for a long time in vacuum at room temperature, but if vacuum condition is not

available, it is recommended to be stored in a dry condition inside desiccator.

As for products in storage over 6 months, please check solderability before use.

Thick Film Chip Resistors (RC Series)

1. The product specifications are subject to change, modify or suspend at any time without prior

notice by our company. Hence, it is a must to get approval of the product specifications before

making orders for products. For more inquires on the product specifications, please contact

our sales in-charge or engineer (AE).

2. Without our permission, any copies, duplications, use or transmission of contents or

information contained in this specification (catalog) for any purpose are prohibited.

3. No responsibility shall be held for any claims, disputes, damages or liabilities arising from or

related to the misuse of the Products and or information contained in this Specification

(Catalog). In addition, regarding the use of the products and information contained in this

Specification (Catalog), no liability shall be held for any claims, disputes, damages or liabilities

relating to our or any third party ’ s intellectual property rights or other related rights.

4. Bilateral discussions shall be required in case there are unmarked or uncertain parts in the

specification (catalog).