LM185QML www.ti.com SNVS386D - NOVEMBER 2005 - REVISED MARCH 2013 LM185QML Adjustable Micropower Voltage References Check for Samples: LM185QML FEATURES DESCRIPTION * * * * The LM185 are micropower 3-terminal adjustable band-gap voltage reference diodes. Operating from 1.24 to 5.3V and over a 10A to 20mA current range, they feature exceptionally low dynamic impedance and good temperature stability. On-chip trimming is used to provide tight voltage tolerance. Since the LM185 band-gap reference uses only transistors and resistors, low noise and good long-term stability result. 1 2 Adjustable from 1.24V to 5.30V Operating Current of 10A to 20mA 1 Dynamic Impedance Low Temperature Coefficient Careful design of the LM185 has made the device tolerant of capacitive loading, making it easy to use in almost any reference application. The wide dynamic operating range allows its use with widely varying supplies with excellent regulation. The extremely low power drain of the LM185 makes it useful for micropower circuitry. This voltage reference can be used to make portable meters, regulators or general purpose analog circuitry with battery life approaching shelf life. Further, the wide operating current allows it to replace older references with a tighter tolerance part. Connection Diagrams Figure 1. PFM Metal Can Package (Bottom View) See Package Number NDV0003H Figure 2. 20-Leadless Chip Carrier (Top View) See Package Number NAJ0020A N/C 1 10 N/C 2 9 N/C N/C 3 8 N/C N/C 4 7 ADJ V- 5 6 N/C +VREF Figure 3. 10-Lead CLGA (Top View) See Package Number NAC0010A 1 2 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. All trademarks are the property of their respective owners. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright (c) 2005-2013, Texas Instruments Incorporated LM185QML SNVS386D - NOVEMBER 2005 - REVISED MARCH 2013 www.ti.com Block Diagram Schematic Diagram These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates. 2 Submit Documentation Feedback Copyright (c) 2005-2013, Texas Instruments Incorporated Product Folder Links: LM185QML LM185QML www.ti.com SNVS386D - NOVEMBER 2005 - REVISED MARCH 2013 Absolute Maximum Ratings (1) Reverse Current 30mA Forward Current 10mA Operating Temperature Range -55C TA 125C Storage Temperature -55C TA 150C Maximum Junction Temperature TJmax 150C Lead Temperature (soldering, 10 seconds) 300C JA Thermal Resistance JC Package Weight (Typical) LCCC Package (Still Air) 100C/W LCCC Package (500LF/Min Air flow) 73C/W Metal Can Package (Still Air) 300C/W Metal Can Package (500LF/Min Air flow) 139C/W CLGA Package (Still Air) 194C/W CLGA Package (500LF/Min Air flow) 128C/W LCCC Package 25C/W Metal Can Package 57C/W CLGA Package 23C/W LCCC Package TBD Metal Can Package TBD CLGA Package 210mg ESD Tolerance (2) (1) (2) 500V Absolute Maximum Ratings are limits beyond which damage to the device may occur. Operating Ratings are conditions under which operation of the device is intended to be functional. For guaranteed specifications and test conditions, see the Electrical Characteristics. Human body model, 1.5 k in series with 100 pF. Table 1. Quality Conformance Inspection Mil-Std-883, Method 5005 - Group A Subgroup Description Temp C 1 Static tests at 25 2 Static tests at 125 3 Static tests at -55 4 Dynamic tests at 25 5 Dynamic tests at 125 6 Dynamic tests at -55 7 Functional tests at 25 8A Functional tests at 125 8B Functional tests at -55 9 Switching tests at 25 10 Switching tests at 125 11 Switching tests at -55 12 Settling time at 25 13 Settling time at 125 14 Settling time at -55 Submit Documentation Feedback Copyright (c) 2005-2013, Texas Instruments Incorporated Product Folder Links: LM185QML 3 LM185QML SNVS386D - NOVEMBER 2005 - REVISED MARCH 2013 www.ti.com LM185B Electrical Characteristics DC Parameters Symbol VRef Parameter Reference Voltage Conditions Notes Max Unit 1.228 1.252 V 1 1.215 1.255 V 2, 3 IR = 9A 1.228 1.252 V 1 IR = 10A 1.215 1.255 V 2, 3 IR = 1mA 1.228 1.252 V 1 1.215 1.255 V 2, 3 1.228 1.252 V 1 1.215 1.255 V 2, 3 1.228 1.252 V 1 1.215 1.255 V 2, 3 VR = 5.3V, IR = 45A 1.288 1.252 V 1 VR = 5.3V, IR = 50A 1.215 1.255 V 2, 3 VR = 5.3V, IR = 1.0mA 1.288 1.252 V 1 1.215 1.255 V 2, 3 1.288 1.252 V 1 1.215 2, 3 IR = 100A IR = 20mA VR = 5.3V, IR = 100A VR = 5.3V, IR = 20mA VRef/IR Reference Voltage Change with Current Subgroups Min 1.255 V 9A IR 1mA 1.0 mV 1 10A IR 1mA 1.5 mV 2, 3 1mA IR 20mA 10 mV 1 20 mV 2, 3 VR = 5.3V, 45A IR 1mA 1.0 mV 1 VR = 5.3V, 50A IR 1mA 1.5 mV 2, 3 VR = 5.3V, 1mA IR 20mA 10 mV 1 20 mV 2, 3 3.0 mV 1 6.0 mV 2, 3 VRef / VO Reference Voltage Change with Output Voltage VR = 5.3V, IR = 100A IF Feedback Current IR = 9A 20 nA 1 IR = 10A 25 nA 2, 3 IR = 20mA 20 nA 1 25 nA 2, 3 VR = 5.3V, IR = 45A 20 nA 1 VR = 5.3V, IR = 50A 25 nA 2, 3 VR = 5.3V, IR = 20mA 20 nA 1 25 nA 2, 3 See (1) 9.0 A 1 See (1) 10 A 2, 3 See (1) 45 A 1 See (1) 50 A 2, 3 IC Minimum Operating Current VR = VRef VR = 5.3V (1) 4 Functional test. Submit Documentation Feedback Copyright (c) 2005-2013, Texas Instruments Incorporated Product Folder Links: LM185QML LM185QML www.ti.com SNVS386D - NOVEMBER 2005 - REVISED MARCH 2013 LM185BY Electrical Characteristics DC Parameters Symbol VRef Parameter Reference Voltage Conditions Notes Max Unit 1.228 1.252 V 1 1.215 1.255 V 2, 3 IR = 9A 1.228 1.252 V 1 IR = 10A 1.215 1.255 V 2, 3 IR = 1mA 1.228 1.252 V 1 1.215 1.255 V 2, 3 1.228 1.252 V 1 1.215 1.255 V 2, 3 1.228 1.252 V 1 1.215 1.255 V 2, 3 VR = 5.3V, IR = 45A 1.288 1.252 V 1 VR = 5.3V, IR = 50A 1.215 1.255 V 2, 3 VR = 5.3V, IR = 1.0mA 1.288 1.252 V 1 1.215 1.255 V 2, 3 1.288 1.252 V 1 1.215 2, 3 IR = 100A IR = 20mA VR = 5.3V, IR = 100A VR = 5.3V, IR = 20mA VRef/IR Reference Voltage Change with Current Subgroups Min 1.255 V 9A IR 1mA 1.0 mV 1 10A IR 1mA 1.5 mV 2, 3 1mA IR 20mA 10 mV 1 20 mV 2, 3 VR = 5.3V, 45A IR 1mA 1.0 mV 1 VR = 5.3V, 50A IR 1mA 1.5 mV 2, 3 VR = 5.3V, 1mA IR 20mA 10 mV 1 20 mV 2, 3 3.0 mV 1 6.0 mV 2, 3 VRef / VO Reference Voltage Change with Output Voltage VR = 5.3V, IR = 100A IF Feedback Current IR = 9A 20 nA 1 IR = 10A 25 nA 2, 3 IR = 20mA 20 nA 1 25 nA 2, 3 VR = 5.3V, IR = 45A 20 nA 1 VR = 5.3V, IR = 50A 25 nA 2, 3 VR = 5.3V, IR = 20mA 20 nA 1 25 nA 2, 3 See (1) 9.0 A 1 See (1) 10 A 2, 3 See (1) 45 A 1 See (1) 50 A 2, 3 See (2) 50 PPM/C 1, 2, 3 IC Minimum Operating Current VR = VRef VR = 5.3V TC (1) (2) Temperature Coefficient Functional test. The average temperature coefficient is defined as the maximum deviation of reference voltage, at all measured temperatures between the operating TMin & TMax, divided by (TMax - TMin). The measured temperatures (TMeasured) are -55C, 25C, & 125C or VRef / (TMax - TMin) Submit Documentation Feedback Copyright (c) 2005-2013, Texas Instruments Incorporated Product Folder Links: LM185QML 5 LM185QML SNVS386D - NOVEMBER 2005 - REVISED MARCH 2013 www.ti.com Typical Performance Characteristics 6 Temperature Drift of 3 Representative Units Feedback Current Figure 4. Figure 5. Minimum Operating Current Reverse Characteristics Figure 6. Figure 7. Reverse Characteristics Forward Characteristics Figure 8. Figure 9. Submit Documentation Feedback Copyright (c) 2005-2013, Texas Instruments Incorporated Product Folder Links: LM185QML LM185QML www.ti.com SNVS386D - NOVEMBER 2005 - REVISED MARCH 2013 Typical Performance Characteristics (continued) Output Noise Voltage Dynamic Output Impedance Figure 10. Figure 11. Response Time Figure 12. Temperature Coefficient Typical LM185 Figure 13. Submit Documentation Feedback Copyright (c) 2005-2013, Texas Instruments Incorporated Product Folder Links: LM185QML 7 LM185QML SNVS386D - NOVEMBER 2005 - REVISED MARCH 2013 www.ti.com TYPICAL APPLICATIONS Precision 10V Reference Low AC Noise Reference Figure 14. Figure 15. 25V Low Current Shunt Regulator Figure 16. Figure 17. Series-Shunt 20 mA Regulator Figure 18. 8 200 mA Shunt Regulator High Efficiency Low Power Regulator Figure 19. Submit Documentation Feedback Copyright (c) 2005-2013, Texas Instruments Incorporated Product Folder Links: LM185QML LM185QML www.ti.com SNVS386D - NOVEMBER 2005 - REVISED MARCH 2013 Voltage Level Detector Voltage Level Detector Figure 20. Figure 21. Fast Positive Clamp 2.4V + VD1 Bidirectional Clamp 2.4V Figure 22. Figure 23. Bidirectional Adjustable Clamp 1.8V to 2.4V Figure 24. Bidirectional Adjustable Clamp 2.4V to 6V Figure 25. *D1 can be any LED, VF=1.5V to 2.2V at 3 mA. D1 may act as an indicator. D1 will be on if ITHRESHOLD falls below the threshold current, except with I=O. Submit Documentation Feedback Copyright (c) 2005-2013, Texas Instruments Incorporated Product Folder Links: LM185QML 9 LM185QML SNVS386D - NOVEMBER 2005 - REVISED MARCH 2013 www.ti.com Simple Floating Current Detector Figure 26. Figure 27. Current Source Centigrade Thermometer, 10mV/C Figure 28. Figure 29. Freezer Alarm 1.2V Reference Figure 30. 10 Precision Floating Current Detector Figure 31. Submit Documentation Feedback Copyright (c) 2005-2013, Texas Instruments Incorporated Product Folder Links: LM185QML LM185QML www.ti.com SNVS386D - NOVEMBER 2005 - REVISED MARCH 2013 5.0V Reference Figure 32. REVISION HISTORY SECTION Released Revision Section Originator Changes 11/08/05 A New Release, Corporate format L. Lytle 2 MDS data sheets converted into one Corp. data sheet format. MNLM185B-X Rev 0B0 and MNLM185BY-X Rev 0B0 will be archived. 04/06/06 B Ordering Information Table, WG Connection Diagram, Absolute Maximum Ratings Section, Physical Dimensions Section R. Malone Added NSID, Connection Diagram, Physical Dimension Dwg, Thermal Resistance and Package Weight for NAC package. Revision A will be Archived. 06/12/08 C LM185B and LM185BY Electrical Section Larry McGee Correct IC test, VR = VREF condition, subgroup 1, 2, 3 moved limits to the maximum column. Revision B will be Archived. 03/27/13 D All Changed layout of National Data Sheet to TI format. Submit Documentation Feedback Copyright (c) 2005-2013, Texas Instruments Incorporated Product Folder Links: LM185QML 11 PACKAGE OPTION ADDENDUM www.ti.com 11-Apr-2013 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish (2) MSL Peak Temp Op Temp (C) Top-Side Markings (3) (4) 5962-9091402QYA ACTIVE CFP NAC 10 54 TBD Call TI Call TI -55 to 125 LM185BWG /883 Q 5962-90914 02QYA ACO 02QYA >T LM185BWG/883 ACTIVE CFP NAC 10 54 TBD Call TI Call TI -55 to 125 LM185BWG /883 Q 5962-90914 02QYA ACO 02QYA >T (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) Multiple Top-Side Markings will be inside parentheses. Only one Top-Side Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Top-Side Marking for that device. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. Addendum-Page 1 Samples PACKAGE OPTION ADDENDUM www.ti.com 11-Apr-2013 In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 2 MECHANICAL DATA NAC0010A WG10A (Rev H) www.ti.com IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as "components") are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI's terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers' products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers' products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI's goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or "enhanced plastic" are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of non-designated products, TI will not be responsible for any failure to meet ISO/TS16949. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP(R) Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2013, Texas Instruments Incorporated