TOSHIBA TC74ACOOP/F/FN/FT TOSHIBA CMOS DIGITAL INTEGRATED CIRCUIT SILICON MONOLITHIC TC74ACOOP, TC74ACO0F, TC74ACO0FN, TC74ACOOFT QUAD 2-INPUT NAND GATE (Note) The JEDEC SOP (FN) is not available in Japan. The TC74AC00 is an advanced high speed CMOS 2-INPUT NAND GATE fabricated with silicon gate and double - layer metal wiring C2MOS technology. It achieves the high speed operation similar to equivalent Bipolar Schottky TTL while maintaining the CMOS low power dissipation. The internal circuit is composed of 3 stages including buffer output, which provide high noise immunity and stable output. All inputs are equipped with protection circuits against static discharge or transient excess voltage. FEATURES : High Speedsssssseesssecsessnsessseeneesntees tod = 3.8ns(typ.) at Voc = 5V e Low Power Dissipation ::+++++++++++++ loc = 4uA(Max.) at Ta = 25C e High Noise Immunity--+-+-+++++++++++ VaiH = Vnit = 28% Voc (Min.)} Symmetrical Output Impedance:-| lon | =lo. = 24mA(Min.) Capability of driving 500 transmission lines. Balanced Propagation Delays: toLH=tpHL e Wide Operating Voltage Range-:- Vcc (opr) =2V~5.5V Pin and Function Compatible with 74F00 P (DIP14-P-300-2.54) FN (SOL14-P-150-1.27) Weight : 0.969 (Typ.) Weight : 0.12g (Typ.) F (SOP14-P-300-1.27) FT (TSSOP14-P-0044-0.65) Weight : 0.189 (Typ.) Weight : 0.06g (Typ.) PIN ASSIGNMENT A 1, [] 14 Vee 1B 2 Vu [] 13 4B vy 3 oe 12 4A 2a 4] [J] 11 4Y 2B 5 qu [] 10 3B 2Y 6 [ pe 3A GND 7 [ [] 8 3Y (TOP VIEW) IEC LOGIC SYMBOL TRUTH TABLE 2001-05-17TOSHIBA TC74ACOOP/F/FN/FT ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL VALUE UNIT *500mW in the range of Ta= Supply Voltage Range Vec 0.5~7.0 Vv 5 socG 65C. From Ta=65C H5~ to 85C a derating factor o DC Input Voltage Vin 0.5~Vece + 0.5 V LOmW/"C should be applied DC Output Voltage Vout 0.5~Vec + 0.5 Vv up to 300mW. Input Diode Current li +20 mA Output Diode Current lox +50 mA DC Output Current lout +50 mA DC V/Ground Current lec +100 mA Power Dissipation Pp 500 (DIP)* / 180 (SOP/TSSOP)| mW Storage Temperature Tstg 65~150 C RECOMMENDED OPERATING CONDITIONS PARAMETER SYMBOL VALUE UNIT Supply Voltage Vec 2.0~5.5 V Input Voltage VIN O~Vec V Output Voltage Vout O~Vec Vv Operating Temperature Topr 40~85 C . . O~ 100 (Vcc = 3.3 0.3V) Input Rise and Fall Time dt/dV O~ 20(Vcc= 5+0.5V) ns/V DC ELECTRICAL CHARACTERISTICS Ta =25C Ta = -40~85C PARAMETER SYMBOL TEST CONDITION Vec UNIT (V) | MIN. | TYP. | MAX.| MIN. | MAX. High-Level Vin 30/210; | |2%0| | v p 9 5.5 | 3.85 | | 385] - Low - Level 2.0 7 7 0.50 _ 0.50 Input Voltage Vit 3.0 0.90 0.90 | V p g 55] 1165 | | 1.65 2.0 | 1.9 2.0 _ 1.9 _ lon = 50uA 3.0 | 2.9 3.0 _ 2.9 _ High - Level V Vin= 45 | 44 4.5 4.4 V Output Voltage OH Vicor lon=4mA_ | 3.0 | 2.58] 2.48 | IHOFMiL Tioy=24mA | 4.5] 3.94 | 3.80 | lon = 75mA* | 5.5 _ _ _ 3.85 _ 2.0 _ 0.0 0.1 _ 0.1 lo. = 502A 30; | 00 | 0.1 | 0.1 Low - Level Vo. ViezViq 45| | 0.0 | 0.1 = [041 | Output Voltage lol = 12MA 3.0 _ _ 0.36 _ 0.44 lol = 24mMA 45 _ _ 0.36 _ 0.44 loc = 75mA* 5.5 _ _ _ _ 1.65 Input Leakage Current lin Vin=Vcc or GND 5.5 _ _ +0.1 _ + 1.0 A Quiescent Supply Current lec Vin =Vec or GND 5.5 _ _ 4.0 _ 40.0 u * : This spec indicates the capability of driving 500 transmission lines. One output should be tested at a time for a 10ms maximum duration. 2001-05-17TOSHIBA TC74ACOOP/F/FN/FT AC ELECTRICAL CHARACTERISTICS (C, = 50pF, R, = 5000 , Input t,=t;=3ns) TEST CONDITION Ta=25C Ta= 40~85C PARAMETER SYMBOL UNIT Vec(V) | MIN. TYP. | MAX. | MIN. | MAX. ; ; toLH 3.340.3) 6.6 11.2 1.0 12.9 Propagation Delay Time toHL 5.0+05 _ 49 70 10 3.0 ns Input Capacitance Cin _ 5 10 _ 10 ; Power Dissipation Capacitance Cpp(1) _ 68 _ _ _ P Note (1) Cpp is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption. Average operating current can be obtained by the equation: lec (opr.) =Cpp- Vcc: f ntlec/4 ( per Gate ) 3 2001-05-17TOSHIBA TC74ACOOP/F/FN/FT DIP 14PIN PACKAGE DIMENSIONS (DIP14-P-300-2.54) Unit in mm o 14 8 3 ee) a) a) | a a a a 19.75MAX 19,25+0.2 Weight : 0.96g (Typ.) Unit in mm SOP 14PIN (200mil BODY) PACKAGE DIMENSIONS (SOP14-P-300-1.27) 14 GB _ HHHHEHE a 9 al = So a] & els bp on 2 cd HHER oS | 1 7 1.34TYP 0.43+0.1 10.25) OI ny 4 0.15*345 0.820.2 Weight : 0.18g (Typ.) 4 2001-05-17TOSHIBA TC74ACOOP/F/FN/FT SOP 14PIN (150mil BODY) PACKAGE DIMENSIONS (SOL14-P-150 -1.27) Unit in mm (Note) This package is not available in Japan. 14 a RHHBRHEE a] 3 a] 6 oO o HH BEE | 1 7 9.515TYP 0.4210.07 paras 8.65+0.1 a foot z 45 _* sr r= 3 3 0.720.3 Weight : 0.12g (Typ.) TSSOP 14PIN (170mil BODY) PACKAGE DIMENSIONS (TSSOP14-P-0044-0.65) Unit in mm Hanpane 44x 64A+G.2 { 7 0.08 0.55TYP foes) || 024897 pe {ee Of falo.13 @ 5.26MAX | 5.0204 \ Ln 1.00.05 1.2MAX 0.1+0.05 40.025 0.45~0.75 Weight : 0.06g (Typ.) 5 2001-05-17TOSHIBA TC74ACOOP/F/FN/FT RESTRICTIONS ON PRODUCT USE 000707EBA @ TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the Handling Guide for Semiconductor Devices, or TOSHIBA Semiconductor Reliability Handbook etc.. @ The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (Unintended Usage). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's own risk. @ The products described in this document are subject to the foreign exchange and foreign trade laws. @ The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. @ The information contained herein is subject to change without notice. 6 2001-05-17