TCR2BF series, TCR2BE series
2011-06-06
1
TOSHIBA CMOS Linear Integrated Circuit Silicon Monolithic
TCR2BF series
TCR2BE series
200 mA CMOS Low Drop-Out Regulator with Auto-discharge
The TCR2BF series and TCR2BE series are CMOS
general-purpose single-output voltage regulators with an on/off
control input, featuring low dropout voltage and low quiescent bias
current. These voltage regulators can be enabled and disabled via
the CONTROL pin.
These voltage regulators are available in fixed output voltages
between 1.0 V and 5.0 V in SMV package, 1.0 to 3.6V in ESV
package, and capable of driving up to 200 mA. They feature
overcurrent protection and auto-discharge function.
The TCR2BF series and TCR2BE series are offered in the
compact SMV (SOT-25)(SC-74A) and ESV (SOT-553) and allow the
use of small ceramic input and output capacitors. Thus, these
devices are ideal for portable applications that require high-density
board assembly such as cellular phones.
Features
Wide fixed output voltage line up
TCR2BF series (SMV package) : VOUT = 1.0 to 5.0 V
TCR2BE series (ESV package) : VOUT = 1.0 to 3.6 V
Low output noise voltage ( VNO = 50 μVrms (typ.) at 2.8 V-output, IOUT = 10 mA, 10 Hz
<
=
f
<
=
100 kHz)
Low quiescent bias current ( IB = 75 μA (max) at IOUT = 0 mA )
Low stand-by current ( IB(OFF) = 0.1 μA (typ.) at Stand-by mode )
High ripple rejection ( R.R. = 70 dB (typ.) at IOUT = 10 mA, f =1kHz )
Overcurrent protection
Auto-discharge
Pull-down connection at CONTROL
Ceramic capacitors can be used ( CIN = 0.1μF, COUT =1.0 μF )
Small package, SMV (SOT-25) (SC-74A) and ESV (SOT-553)
Pin Assignment (top view)
SMV (SOT-25)(SC-74A) ESV (SOT-553)
Weight:
SMV (SOT-25)(SC-74A) : 16 mg (typ.)
ESV (SOT-553) : 3.0 mg (typ.)
SMV
ESV
VOUT
CONTROL GND
NC
VIN
13
2
4
5
VOUT
CONTROL GND
NC
VIN
1 3
2
4
5
TCR2BF series, TCR2BE series
2011-06-06
2
List of Products Number, Output Voltage, and Marking
Product No. Product No.
SMV(SOT-25) ESV(SOT-553)
VOUT
(V)(typ.) Marking
SMV(SOT-25) ESV(SOT-553)
VOUT
(V)(typ.) Marking
TCR2BF10 TCR2BE10 1.0 1M0 TCR2BF29* TCR2BE29* 2.9 2M9
TCR2BF105* TCR2BE105* 1.05 1MA TCR2BF295* TCR2BE295* 2.95 2ME
TCR2BF11* TCR2BE11* 1.1 1M1 TCR2BF30 TCR2BE30 3.0 3M0
TCR2BF115 TCR2BE115 1.15 1MB TCR2BF31 TCR2BE31 3.1 3M1
TCR2BF12 TCR2BE12 1.2 1M2 TCR2BF32 TCR2BE32 3.2 3M2
TCR2BF125 TCR2BE125 1.25 1MC TCR2BF33 TCR2BE33 3.3 3M3
TCR2BF13* TCR2BE13* 1.3 1M3 TCR2BF34* TCR2BE34* 3.4 3M4
TCR2BF14* TCR2BE14* 1.4 1M4 TCR2BF35* TCR2BE35* 3.5 3M5
TCR2BF15 TCR2BE15 1.5 1M5 TCR2BF36 TCR2BE36 3.6 3M6
TCR2BF16* TCR2BE16* 1.6 1M6 TCR2BF37* 3.7 3M7
TCR2BF17* TCR2BE17* 1.7 1M7 TCR2BF38* 3.8 3M8
TCR2BF175* TCR2BE175* 1.75 1MF TCR2BF39* 3.9 3M9
TCR2BF18 TCR2BE18 1.8 1M8 TCR2BF40 4.0 4M0
TCR2BF19* TCR2BE19* 1.9 1M9 TCR2BF41* 4.1 4M1
TCR2BF20* TCR2BE20* 2.0 2M0 TCR2BF42* 4.2 4M2
TCR2BF21* TCR2BE21* 2.1 2M1 TCR2BF43* 4.3 4M3
TCR2BF22* TCR2BE22* 2.2 2M2 TCR2BF44* 4.4 4M4
TCR2BF23* TCR2BE23* 2.3 2M3 TCR2BF45 4.5 4M5
TCR2BF24* TCR2BE24* 2.4 2M4 TCR2BF46* 4.6 4M6
TCR2BF25 TCR2BE25 2.5 2M5 TCR2BF47* 4.7 4M7
TCR2BF26* TCR2BE26* 2.6 2M6 TCR2BF48* 4.8 4M8
TCR2BF27 TCR2BE27 2.7 2M7 TCR2BF49* 4.9 4M9
TCR2BF28 TCR2BE28 2.8 2M8 TCR2BF50 5.0 5M0
TCR2BF285* TCR2BE285* 2.85 2MD
Please contact your local Toshiba representative if you are interested in products with * sign
Marking (top view)
Example: TCR2BF33 (3.3 V output) Example: TCR2BE33 (3.3 V output)
3 M 3
3 M 3
TCR2BF series, TCR2BE series
2011-06-06
3
Absolute Maximum Ratings (Ta = 25°C)
Characteristics Symbol Rating Unit
Input voltage VIN 6.0 V
Control voltage VCT -0.3 to 6.0 V
Output voltage VOUT -0.3 to VIN + 0.3 V
Output current IOUT 200 mA
200 (Note 1)
SMV
380 (Note 2)
150 (Note 1)
Power dissipation PD
ESV
320 (Note 3)
mW
Operation temperature range Topr 40 to 85 °C
Junction temperature Tj 150 °C
Storage temperature range Tstg 55 to150 °C
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly
even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute
maximum ratings and the operating ranges.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Note 1: Unit Rating
Note 2: Rating at mounting on a board
(Glass epoxy board dimension: 30 mm × 30 mm, Copper area: 50 mm2)
Note 3: Rating at mounting on a board
(Glass epoxy board dimension: 30 mm × 30 mm, Copper area: 20 mm2)
TCR2BF series, TCR2BE series
2011-06-06
4
Electrical Characteristics
(Unless otherwise specified,
VIN = VOUT + 1 V, IOUT = 50 mA, CIN = 0.1 μF, C OUT = 1.0 μF, Tj = 25°C)
Characteristics Symbol Test Condition Min Typ. Max Unit
VOUT 1.4 V -30 +30 mV
Output voltage VOUT
1.5V VOUT -2 +2 %
Line regulation Regline VOUT + 0.5 V
<
=
VIN
<
=
6 V,
IOUT = 1 mA 1 15 mV
Load regulation Regload 1 mA
<
=
IOUT
<
=
150 mA 10 30 mV
Quiescent current IB IOUT = 0 mA 40 75 μA
Stand-by current IB (OFF) V
CT = 0 V 0.1 1.0 μA
Dropout voltage VIN-VOUT
Please refer to the Dropout voltage table
Temperature coefficient TCVO 40°C
<
=
Topr
<
=
85°C 100 ppm/°C
Output noise voltage VNO VIN = VOUT + 1 V, IOUT = 10 mA,
10 Hz
<
=
f
<
=
100 kHz, Ta = 25°C (Note 4) 50 μVrms
VOUT : 1.0V 1.55 6.0
VOUT : 1.05V to 1.1V VOUT +
0.50 V 6.0
VOUT : 1.15V to 1.2V 1.58 6.0
VOUT : 1.25V 1.59 6.0
VOUT : 1.3V 1.63 6.0
VOUT : 1.4V 1.68 6.0
VOUT : 1.5V to 1.75V VOUT
+0.25 V 6.0
VOUT : 1.8V to 2.4V VOUT
+0.20 V 6.0
Input voltage VIN
VOUT : 2.5V to 5.0V V
OUT
+0.15 V 6.0
V
Ripple rejection ratio R.R.
VIN = VOUT + 1 V, IOUT = 10 mA,
f = 1 kHz, VRipple = 500 mVp-p,
Ta = 25°C
70 dB
Control voltage (ON) VCT (ON) 1.1 6.0 V
Control voltage (OFF) VCT (OFF) 0 0.4 V
Note 4: The 2.8V output product.
TCR2BF series, TCR2BE series
2011-06-06
5
Dropout Voltage
(IOUT = 50 mA, CIN = 0.1 μF, C OUT = 1.0 μF, Tj = 25°C)
Output voltage Symbol Min Typ. Max Unit
VOUT : 1.0V 350 550
VOUT : 1.05V 340 500
VOUT : 1.1V 310 500
VOUT : 1.15V 290 430
VOUT : 1.2V 260 380
VOUT : 1.25V 250 340
VOUT : 1.3V 230 330
VOUT : 1.4V 190 280
VOUT : 1.5V to 1.75V 160 250
VOUT : 1.8V to 2.4V 130 200
VOUT : 2.5V to 5.0V
VIN-VOUT
100 150
mV
TCR2BF series, TCR2BE series
2011-06-06
6
Application Note
1. Recommended Application Circuit
The figure above shows the recommended configuration for using a Low-Dropout regulator. Insert a capacitor at
VOUT and VIN pins for stable input/output operation. (Ceramic capacitors can be used).
2. Power Dissipation
Power dissipation is measured on the board shown below.
Testing Board of Thermal Resistance
CONTROL pin
connection Operation
HIGH ON
LOW OFF
OPEN OFF
Ambient temperature Ta (°C)
PD – Ta (SMV)
Power dissipation PD (mW)
40
0
0 40 120 80
100
200
300
400
Board dimension 30 mm x 30 mm,
t = 0.8 mm Copper area 50 mm2,
mounted on Glass Epoxy Board
Unit Rating
C
OU
T
VIN
V
OU
T
CONTROL
GND
CIN
NC
SM
V
ES
V
NC
CONTROL
GND V
IN
C
IN
C
OUT
VOUT
Ambient temperature Ta (°C)
PD – Ta (ESV)
Power dissipation PD (mW)
40
0
0 40 120 80
100
200
300
400
Board dimension 30 mm x 30 mm,
t = 0.8 mm Copper area 20 mm2,
mounted on Glass Epoxy Board
Unit Rating
*Board material: Glass Epoxy
Board dimension: 30 mm × 30 mm
Copper area: 20 mm2, t = 0.8 mm
*Board material: Glass Epoxy
Board dimension: 30 mm × 30 mm
Copper area: 50 mm2t = 0.8 mm
VOUT
GND
VIN
1.0 μF 0.1 μF
CONTROL
NC
SMV ESV
VOUT
GND VIN
1.0 μF
0.1 μF
CONTROL
NC
TCR2BF series, TCR2BE series
2011-06-06
7
Attention in Use
Output Capacitors
Ceramic capacitors can be used for these devices. However, because of the type of the capacitors, there might be
unexpected thermal features. Please consider application condition for selecting capacitors. And Toshiba
recommend the ESR of ceramic capacitor is under 10 .
Mounting
The long distance between IC and output capacitor might affect phase assurance by impedance in wire and inductor.
For stable power supply, output capacitor need to mount near IC as much as possible. Also GND pattern need to
be large and make the wire impedance small as possible.
Permissible Loss
Please have enough design patterns for expected maximum permissible loss. And under consideration of
surrounding temperature, input voltage, and output current etc, we recommend proper dissipation ratings for
maximum permissible loss; in general maximum dissipation rating is 70 to 80 percent.
Overcurrent Protection Circuit
Overcurrent protection circuit is designed in these products, but this does not assure for the suppression of uprising
device operation. If output pins and GND pins are shorted out, these products might be break down.
In use of these products, please read through and understand dissipation idea for absolute maximum ratings from
the above mention or our ‘Semiconductor Reliability Handbook’. Then use these products under absolute maximum
ratings in any condition. Furthermore, Toshiba recommend inserting failsafe system into the design.
TCR2BF series, TCR2BE series
2011-06-06
8
Representative Typical Characteristics
1) Output Voltage vs. Input Voltage
2) Output Voltage vs. Output Current
VOUT=1.0V
Output voltage VOUT (V)
0.9
1.0
1.1
VIN = 2.0 V,
CIN = 0.1 μF, COUT = 1 μF
0 60 100 200
Output current IOUT (mA)
20 40 80 120 140 160 180
VOUT=1.8V
Output current IOUT (mA)
Output voltage VOUT (V)
1.7
1.8
1.9
VIN = 2.8V,
CIN = 0.1 μF, C OUT = 1 μF
0 60 100 200 20 40 80 120 140 160 180
VOUT=1.0V
Input voltage VIN (V)
Output voltage VOUT (V)
0 1 4 6
0
1.5
2.0
0.5
1.0
CIN = 0.1 μF, C OUT = 1 μF
2 3 5
IOUT = 10mA
IOUT = 50mA
IOUT = 150mA
Input voltage VIN (V)
Output voltage VOUT (V)
0 1 4 6
0
3.0
4.0
1.0
2.0
CIN = 0.1 μF, C OUT = 1 μF
2 3 5
VOUT=1.8V
IOUT = 10mA
IOUT = 50mA
IOUT = 150mA
Input voltage VIN (V)
Output voltage VOUT (V)
0 1 4 6
0
3.0
4.0
1.0
2.0
CIN = 0.1 μF, C OUT = 1 μF
2 3 5
VOUT=3.0V
IOUT = 10mA
IOUT = 50mA
IOUT = 150mA
TCR2BF series, TCR2BE series
2011-06-06
9
3) Output Voltage vs. Ambient Temperature
VOUT=3.0V
Output current IOUT (mA)
Output voltage VOUT (V)
2.9
3.0
3.1
VIN = 4.0V,
CIN = 0.1 μF, C OUT = 1 μF
0 60 100 200 20 40 80 120 140 160 180
VOUT=1.8V
50
1.7 25 0 25 75 50
1.75
1.8
1.85
1.9
VIN = 2.8 V,
CIN = 0.1 μF, C OUT = 1 μF
I
OUT = 50mA
100
Ambient temperature Ta (°C)
Output voltage VOUT (V)
VOUT=1.0V
50
0.9 25 0 25 75 50
0.95
1.0
1.05
1.1
VIN = 2.0 V,
CIN = 0.1 μF, C OUT = 1 μF
IOUT = 50mA
100
Ambient temperature Ta (°C)
Output voltage VOUT (V)
Ambient temperature Ta (°C)
VOUT=3.0V
50
2.9 25 0 25 75 50
2.95
3.0
3.05
3.1
VIN = 4.0 V,
CIN = 0.1 μF, C OUT = 1 μF
IOUT = 50mA
100
Output voltage VOUT (V)
TCR2BF series, TCR2BE series
2011-06-06
10
4) Dropout Voltage vs. Output Current
5) Quiescent Current vs. Input Voltage
VOUT=1.8V
Dropout voltage VIN - VOUT (mV)
0
100
200
300
400
0 40 100 200
Output current IOUT (mA)
80 180 120 140 160 60 20
500 CIN = 0.1 μF, C OUT = 1 μF
VOUT=1.0V
Dropout voltage VIN - VOUT (mV)
0
200
400
600
800
0 40 100 200
Output current IOUT (mA)
80 180 120 140 160 60 20
1000 CIN = 0.1 μF, C OUT = 1 μF
VOUT=2.5V
Dropout voltage VIN - VOUT (mV)
0
100
200
300
400
0 40 100 200
Output current IOUT (mA)
80 180 120 140 160 60 20
500 CIN = 0.1 μF, C OUT = 1 μF
VOUT=1.0V
Quiescent current IB (μA)
CIN = 0.1 μF, COUT = 1 μF
IOUT = 0mA
60
120
0
1 4 6 2 3 5
Input voltage VIN (V)
0
20
40
80
100
VOUT=1.8V
Quiescent current IB (μA)
CIN = 0.1 μF, COUT = 1 μF
IOUT = 0mA
60
120
0
1 4 6
2 3 5
Input voltage VIN (V)
0
20
40
80
100
TCR2BF series, TCR2BE series
2011-06-06
11
6) Quiescent Current vs.Ambient Temperature
VOUT=1.0V
Quiescent current IB (μA)
Ambient temperature Ta (°C)
50 25 0 25 100 75 50
0
50
100
VIN = 2.0 V,
CIN = 0.1 μF, C OUT = 1μF,
IOUT = 0mA
Quiescent current IB (μA)
VOUT=1.8V
Ambient temperature Ta (°C)
50 25 0 25 100 75 50
0
50
100
VIN = 2.8 V,
CIN = 0.1 μF, C OUT = 1μF,
IOUT = 0mA
Quiescent current IB (μA)
VOUT=3.0V
Ambient temperature Ta (°C)
50 25 0 25 100 75 50
0
50
100
VIN = 4.0 V,
CIN = 0.1 μF, C OUT = 1μF,
IOUT = 0mA
VOUT=3.0V
Quiescent current IB (μA)
CIN = 0.1 μF, COUT = 1 μF
IOUT = 0mA
90
180
0
1 4 6 2 3 5
Input voltage VIN (V)
0
30
60
120
150
TCR2BF series, TCR2BE series
2011-06-06
12
7) Overcurrent protection characteristics (Overcurrent protection characteristic does not assure for the suppression of
uprising device operation. We recommend proper dissipation ratings for maximum permissible loss.)
8) Ripple Rejection Ratio vs. Frequency
Output current IOUT (mA)
VOUT=3.0V
Output voltage VOUT (V)
0
5.0
0 100 400 600
VIN = 4.0 V
200 300 500
1.0
VIN = 6.0 V
4.0
3.0
2.0
Pulse width = 1 ms
VOUT=1.0V
Output voltage VOUT (V)
0
2.0
0 100 400 600 200 300 500
1.0
Output current IOUT (mA)
Pulse width = 1 ms
VIN = 6.0 V
VIN =2.0V
VOUT=1.8V
Output voltage VOUT (V)
0
2.5
0 100 400 600
VIN = 2.8 V
200 300 500
1.0
VIN
=
6.0 V
Output current IOUT (mA)
Pulse width = 1 ms
0.5
1.5
2.0
VOUT=3.0V
Frequency f (Hz)
Ripple rejection ratio (dB)
0
10 100 1 k 10 k 100 k 300 k
10
20
30
40
50
60
70
80
VIN = 4.0 V ,Vripple = 500 mVpp
CIN = none, COUT = 1μF
IOUT = 10 mA, Ta = 25°C
90
TCR2BF series, TCR2BE series
2011-06-06
13
9) Control Transient Response (Auto-Discharge)
VOUT=3.0V (Turn on waveform)
VIN = 4.0 V,
CIN = 0.1 μF, C OUT = 1 μF
IOUT = 50 mA
Control voltage
VCT (ON) (1V/div)
Output voltage
VOUT (ON) (1V/div)
Time t ( 100 μs/div )
Time t ( 100 μs/div )
VOUT=1.8V (Turn on waveform)
VIN = 2.8 V,
CIN = 0.1 μF, C OUT = 1 μF
IOUT = 50 mA
Control voltage
VCT (ON) (1V/div)
Output voltage
VOUT (ON) (1V/div)
VOUT=1.0V (Turn on waveform)
VIN = 2.0 V,
CIN = 0.1 μF, C OUT = 1 μF
IOUT = 50 mA
Control voltage
VCT (ON) (1V/div)
Output voltage
VOUT (ON) (1V/div)
Time t ( 100 μs/div )
VOUT=1.0V (Turn off waveform)
Control voltage
VCT (OFF) (1V/div)
Output voltage
VOUT (OFF) (1V/div)
Time t ( 50 μs/div )
VIN = 2.0 V,
CIN = 0.1 μF, C OUT = 1 μF
IOUT = 1mA
IOUT = 50mA
VOUT=1.8V (Turn off waveform)
Control voltage
VCT (OFF) (1V/div)
Output voltage
VOUT (OFF) (1V/div)
Time t ( 50 μs/div )
VIN = 2.8 V,
CIN = 0.1 μF, C OUT = 1 μF
IOUT = 50mA
IOUT = 1mA
VOUT=3.0 V (Turn off waveform)
Control voltage
VCT (OFF) (1V/div)
Output voltage
VOUT (OFF) (1V/div)
Time t ( 50 μs/div )
VIN = 4.0 V,
CIN = 0.1 μF, C OUT = 1 μF
IOUT = 50mA
IOUT = 1mA
TCR2BF series, TCR2BE series
2011-06-06
14
10) Load Transient Response
VOUT=1.0V
(IOUT = 30mA to 1mA)
Output current
IOUT (20mA/div)
Output voltage
V
OUT (50mV/div)
Time t ( 100 μs/div )
VIN = 2.0 V,
CIN = 0.1 μF, C OUT = 1 μF
VOUT=1.0V
(IOUT = 1mA to 30mA)
Output current
IOUT (20mA/div)
Output voltage
V
OUT (50mV/div)
Time t (100 μs/div )
VIN = 2.0 V,
CIN = 0.1 μF, C OUT = 1 μF
VOUT=1.0V
(IOUT = 100mA to 50mA)
Output voltage
V
OUT (50mV/div)
Output current
IOUT (50mA/div)
Time t ( 100 μs/div )
VIN = 2.0 V,
CIN = 0.1 μF, C OUT = 1 μF
VOUT=1.0V
(IOUT = 50mA to 100mA)
Output voltage
V
OUT (50mV/div)
Output current
IOUT (50mA/div)
Time t ( 100 μs/div )
VIN = 2.0 V,
CIN = 0.1 μF, C OUT = 1 μF
VOUT=1.8V
(IOUT = 1mA to 30mA)
Output voltage
V
OUT (50mV/div)
Output current
IOUT (20mA/div)
Time t ( 100 μs/div )
VIN = 2.8 V,
CIN = 0.1 μF, C OUT = 1 μF
VOUT=1.8V
(IOUT =30mA to 1mA)
Output current
IOUT (20mA/div)
Output voltage
V
OUT (50mV/div)
Time t ( 100 μs/div )
VIN = 2.8 V,
CIN = 0.1 μF, COUT = 1 μF
TCR2BF series, TCR2BE series
2011-06-06
15
VOUT=3.0V
(IOUT = 1mA to 30mA)
Output voltage
V
OUT (50mV/div)
Output current
IOUT (20mA/div)
Time t ( 100 μs/div )
VIN = 4.0 V,
CIN = 0.1 μF, C OUT = 1 μF
VOUT=3.0V
(IOUT = 50mA to 100mA)
Output voltage
V
OUT (50mV/div)
Output current
IOUT (50mA/div)
Time t ( 100 μs/div )
VIN = 4.0 V,
CIN = 0.1 μF, C OUT = 1 μF
VOUT=3.0V
(IOUT = 100mA to 50mA)
Output current
IOUT (50mA/div)
Output voltage
V
OUT (50mV/div)
Time t ( 100 μs/div )
VIN = 4.0 V,
CIN = 0.1 μF, C OUT = 1 μF
VOUT=1.8V
(IOUT = 50mA to 100mA)
Output voltage
V
OUT (50mV/div)
Output current
IOUT (50mA/div)
Time t ( 100 μs/div )
VIN = 2.8 V,
CIN = 0.1 μF, C OUT = 1 μF
VOUT=1.8V
(IOUT = 100mA to 50mA)
Output voltage
V
OUT (50mV/div)
Output current
IOUT (50mA/div)
Time t ( 100 μs/div )
VIN = 2.8 V,
CIN = 0.1 μF, C OUT = 1 μF
VOUT=3.0V
(IOUT =30mA to 1mA)
Output current
IOUT (20mA/div)
Output voltage
V
OUT (50mV/div)
Time t ( 100 μs/div )
VIN = 4.0 V,
CIN = 0.1 μF, COUT = 1 μF
TCR2BF series, TCR2BE series
2011-06-06
16
Package Dimensions
SMV (SOT-25)(SC-74A) Unit: mm
Weight : 16 mg (typ.)
TCR2BF series, TCR2BE series
2011-06-06
17
Package Dimensions
ESV (SOT-553) Unit: mm
Weight: 3.0 mg (typ.)
TCR2BF series, TCR2BE series
2011-06-06
18
RESTRICTIONS ON PRODUCT USE
Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively “Product”) without notice.
This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.
Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the
Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of
all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes
for Product and the precautions and conditions set forth in the “TOSHIBA Semiconductor Reliability Handbook” and (b) the
instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their
own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such
design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts,
diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating
parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR
APPLICATIONS.
Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring
equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document.
Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or
reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious
public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used
in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling
equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric
power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this
document.
Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
Do not use or otherwise make available Product or related software or technology for any military purposes, including without
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile
technology products (mass destruction weapons). Product and related software and technology may be controlled under the
Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product
or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of
noncompliance with applicable laws and regulations.