Model 152 Vishay Spectrol 7/ 8" (22.2 mm) Single Turn Wirewound, Precision Potentiometer FEATURES * Rugged, high-quality, all metal housing * Short length behind panel 11/32" (8.76 mm) RoHS * Ohmic value range: 5 to 40 k COMPLIANT * Extra taps available * Bushing and servo mount types ELECTRICAL SPECIFICATIONS PARAMETER Total Resistance Standard Range 5 to 20 k - special to 40 k Tolerance 50 and Above: Below 50 STANDARD 3% 5% SPECIAL 1% 3% Linearity (Independent) Total Resistance 5 to 100 100 to 500 500 and Above STANDARD 1.0 % 1.0 % 0.5 % BEST PRACTICAL 0.75 % 0.50 % 0.35 % 100 ENR Noise 2W derated to zero at 125 C Power Rating (at 40 C Ambient) Electrical Angle 340 2 Insulation Resistance 1000 M minimum 500 VDC Dielectric Strength 1000 VRMS, 60 Hz Not to exceed linearity times total resistance or 0.5 whichever is greater Absolute Minimum Resistance Minimum Voltage 0.5 % max. Temperature Coefficient of Resistance Refer to standard resistance element data ORDERING INFORMATION/DESCRIPTION 152 S 10K BO10 MODEL MOUNTING OHMIC VALUE PACKAGING B: Bushing S: Servo Box of 10 pieces Other characteristics will be standard as described on this data sheet. If special characteristics are required, such as: special linearity, special resistance tolerance, high torque, 1/8 shaft - 1/4 - 32 bushing, stops, non - linear functions, etc., state these on your order. SAP PART NUMBERING GUIDELINES 152 B 502 MODEL MOUNTING TYPE OHMIC VALUE PACKAGING B: Bushing 502 = 5K Box of 10 pieces www.vishay.com 92 For technical questions, contact: sfer@vishay.com B10 Document Number: 57098 Revision: 19-Jun-07 Model 152 7/ " 8 Vishay Spectrol (22.2 mm) Single Turn Wirewound, Precision Potentiometer DIMENSIONS in inches (millimeters) BUSHING MOUNT TYPE: 152B SERVO MOUNT TYPE: 152S MOUNTING SURFACE 0.031 0.875 (22.22) 0.010 0.365 (9.27) 0.015 0.345 (8.76) 0.015 0.030 MAX. (0.76) 0.455 (11.56) 0.062 (1.57) O 0.375 (9.52) X 0.062 (1.57) WIDE IMPERFECT THR'D AREA 0.125 (3.18) 90 + 0.0000 - 0.0003 O 0.2497 (6.34) O 0.875 (22.22) 0.062 (1.57) 0.062 (1.57) 0.010 0.020 MAX. (0.51) + 0.0000 - 0.0005 O 0.750 MAX. (19.05) 0.312 (7.92) O 0.350 MAX. (8.89) 3/ - 32 UNEF - 2A 8 O 0.7500 (19.05) O 0.875 (22.22) + 0.0000 0.190 TERMINAL RADIUS (4,83) 0.1248 O - 0.0003 (3.17) 0.031 0.500 (12.70) O 0.200 MAX. (5.08) MOUNTING SURFACE O 0.062 (1.57) x 0.062 HIGH (1.57) LOCATING PIN 2 1 TOLERANCES: UNLESS OTHERWISE NOTED. DECIMALS 0.005 ANGLES 2 CW 3 SCHEMATIC MECHANICAL SPECIFICATIONS PARAMETER Rotation 360 continuous Servo mount: Ball bearing Bearing Type Bushing mount: Sleeve bearing Torque (Maximums) STARTING RUNNING Servo 0.25 oz. - in (18.00 g - cm) 0.15 oz. - in (10.80 g - cm) Bushing 0.30 oz. - in (21.60 g - cm) 0.25 oz. - in (18.00 g - cm) BUSHING SERVO 0.002" (0.05 cm) 0.002" (0.05 cm) - 0.002" (0.05 cm) Lateral Runout 0.005" (0.13 cm) 0.002" (0.05 cm) Shaft End Play 0.006" (0.15 cm) 0.005" (0.13 cm) Shaft Radial Play 0.003" (0.08 cm) 0.002" (0.05 cm) Mechanical Runouts (Maximums) Shaft Runout Pilot Dia. Runout Weight Document Number: 57098 Revision: 19-Jun-07 0.5 oz. maximum (14.18 g) For technical questions, contact: sfer@vishay.com www.vishay.com 93 Model 152 7/ " 8 Vishay Spectrol (22.2 mm) Single Turn Wirewound, Precision Potentiometer MATERIAL SPECIFICATIONS ENVIRONMENTAL SPECIFICATIONS Housing Vibration Aluminum, anodized Stainless steel, non-magnetic non-passivated Shaft 15 g thru 2000 Hz Shock 50 g 96 h Rear Lid Molded glass filled phenolic Salt Spray Terminals Brass, plated for solderability Rotational Life Shaft Revolution: Bushing Mount Hardware Lockwasher Internal Tooth: Panel Nut: Steel, nickel plated Brass, nickel plated POWER RATING CHART Load Life Servo 2 million 900 h Operating Temperature Range - 55 C to - + 125 C MARKING 4 Unit Identification RATED POWER IN W Bushing 1 million 3 Units shall be marked with Vishay Spectrol name, model number, resistance and tolerance, linearity terminal identification and data code. Applicable test procedures: MIL-R-12934 2 1 0 0 20 40 60 80 100 120 140 160 AMBIENT TEMPERATURE IN C www.vishay.com 94 For technical questions, contact: sfer@vishay.com Document Number: 57098 Revision: 19-Jun-07 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000