See mechanical drawings for dimensions.
NC No internal connection
DBV PACKAGE
(TOP VIEW)
2
5
34Y
1
B
GND
AVCC
DCK PACKAGE
(TOP VIEW)
34
GND
2
B
Y
1
A5VCC
DRL PACKAGE
(TOP VIEW)
2
B
1
A
34
GND Y
5VCC
YZP PACKAGE
(BOTTOM VIEW)
2
B
1
A
GND 4
3Y
5VCC
DRY PACKAGE
(TOP VIEW)
B NC
A6
5
4
2
3
GND Y
VCC
16
5
4
2
3
1
DSF PACKAGE
(TOP VIEW)
B
A
GND
NC
Y
VCC
Y = A • B or Y = +A B
SN74LVC1G08
www.ti.com
SCES217U APRIL 1999REVISED MARCH 2011
SINGLE 2-INPUT POSITIVE-AND GATE
Check for Samples: SN74LVC1G08
1FEATURES
Available in the Texas Instruments NanoFree Latch-Up Performance Exceeds 100 mA Per
Package JESD 78, Class II
Supports 5-V VCC Operation ESD Protection Exceeds JESD 22
Inputs Accept Voltages to 5.5 V 2000-V Human-Body Model (A114-A)
Max tpd of 3.6 ns at 3.3 V 200-V Machine Model (A115-A)
Low Power Consumption, 10-μA Max ICC 1000-V Charged-Device Model (C101)
±24-mA Output Drive at 3.3 V
Ioff Supports Partial-Power-Down Mode
Operation
DESCRIPTION/ORDERING INFORMATION
The SN74LVC1G08 performs the Boolean function or in positive logic.
NanoFreepackage technology is a major breakthrough in IC packaging concepts, using the die as the
package.
This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs,
preventing damaging current backflow through the device when it is powered down.
1Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date. Copyright ©19992011, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
SN74LVC1G08
SCES217U APRIL 1999REVISED MARCH 2011
www.ti.com
ORDERING INFORMATION
ORDERABLE PART
TAPACKAGE(1) TOP-SIDE MARKING(2)
NUMBER
NanoFree WCSP (DSBGA)
0.23-mm Large Bump YZP Reel of 3000 SN74LVC1G08YZPR _ _ _CE_
(Pb-free)
SON DSF Reel of 5000 SN74LVC1G08DSFR CE
SON DRY Reel of 5000 SN74LVC1G08DRYR CE
40°C to 85°CReel of 3000 SN74LVC1G08DBVR
SOT (SOT-23) DBV C08_
Reel of 250 SN74LVC1G08DBVT
Reel of 3000 SN74LVC1G08DCKR
SOT (SC-70) DCK Reel of 250 SN74LVC1G08DCKT CE_
SOT (SOT-553) DRL Reel of 4000 SN74LVC1G08DRLR
(1) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
(2) DBV/DCK/DRL: The actual top-side marking has one additional character that designates the assembly/test site.
YZP: The actual top-side marking has three preceding characters to denote year, month, and sequence code, and one following
character to designate the assembly/test site. Pin 1 identifier indicates solder-bump composition (1 = SnPb, = Pb-free).
Table 1. FUNCTION TABLE
INPUTS OUTPUT
Y
A B
H H H
L X L
X L L
LOGIC DIAGRAM (POSITIVE LOGIC)
2Submit Documentation Feedback Copyright ©19992011, Texas Instruments Incorporated
Product Folder Link(s): SN74LVC1G08
SN74LVC1G08
www.ti.com
SCES217U APRIL 1999REVISED MARCH 2011
Absolute Maximum Ratings(1)
over operating free-air temperature range (unless otherwise noted) MIN MAX UNIT
VCC Supply voltage range 0.5 6.5 V
VIInput voltage range(2) 0.5 6.5 V
VOVoltage range applied to any output in the high-impedance or power-off state(2) 0.5 6.5 V
VOVoltage range applied to any output in the high or low state(2) (3) 0.5 VCC + 0.5 V
IIK Input clamp current VI<050 mA
IOK Output clamp current VO<050 mA
IOContinuous ouput current ±50 mA
Continuous current through VCC or GND ±100 mA
DBV package 206
DCK package 252
θJA Package thermal impedance(4) DRL package 142 °C/W
DRY package 234
YZP package 132
Tstg Storage temperature range 65 150 °C
(1) Stresses beyond those listed under "absolute maximum ratings"may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions"is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) The input and output negative-voltage ratings may be exceeded if the input and output current ratings are observed.
(3) The value of VCC is provided in the recommended operating conditions table.
(4) The package thermal impedance is calculated in accordance with JESD 51-7.
THERMAL INFORMATION SN74LVC1GO8
THERMAL METRIC(1) DBV DCK DRL DRY YZP UNITS
5 PINS 5 PINS 5 PINS 6 PINS 5 PINS
θJA Junction-to-ambient thermal resistance 207.6 283.1 242.9 438.8 130
θJCtop Junction-to-case (top) thermal resistance 145.2 92.3 77.5 276.8 54
θJB Junction-to-board thermal resistance 53.5 60.9 77.5 271.7 51 °C/W
ψJT Junction-to-top characterization parameter 37.5 1.7 9.6 83.8 1
ψJB Junction-to-board characterization parameter 53.1 60.1 77.3 271.4 50
θJCbot Junction-to-case (bottom) thermal resistance –––––
(1) For more information about traditional and new thermal metrics, see the IC Package Thermal Metrics application report, SPRA953.
Recommended Operating Conditions(1)
MIN MAX UNIT
Operating 1.65 5.5
VCC Supply voltage V
Data retention only 1.5
VCC = 1.65 V to 1.95 V 0.65 ×VCC
VCC = 2.3 V to 2.7 V 1.7
VIH High-level input voltage V
VCC = 3 V to 3.6 V 2
VCC = 4.5 V to 5.5 V 0.7 ×VCC
VCC = 1.65 V to 1.95 V 0.35 ×VCC
VCC = 2.3 V to 2.7 V 0.7
VIL Low-level input voltage V
VCC = 3 V to 3.6 V 0.8
VCC = 4.5 V to 5.5 V 0.3 ×VCC
VIInput voltage 0 5.5 V
(1) All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report,
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
Copyright ©19992011, Texas Instruments Incorporated Submit Documentation Feedback 3
Product Folder Link(s): SN74LVC1G08
SN74LVC1G08
SCES217U APRIL 1999REVISED MARCH 2011
www.ti.com
Recommended Operating Conditions(1) (continued) MIN MAX UNIT
VOOutput voltage 0 VCC V
VCC = 1.65 V 4
VCC = 2.3 V 8
IOH High-level output current 16 mA
VCC = 3 V 24
VCC = 4.5 V 32
VCC = 1.65 V 4
VCC = 2.3 V 8
IOL Low-level output current 16 mA
VCC = 3 V 24
VCC = 4.5 V 32
VCC = 1.8 V ±0.15 V, 2.5 V ±0.2 V 20
Δt/Δv Input transition rise or fall rate VCC = 3.3 V ±0.3 V 10 ns/V
VCC = 5 V ±0.5 V 5
TAOperating free-air temperature 40 85 °C
4Submit Documentation Feedback Copyright ©19992011, Texas Instruments Incorporated
Product Folder Link(s): SN74LVC1G08
SN74LVC1G08
www.ti.com
SCES217U APRIL 1999REVISED MARCH 2011
Electrical Characteristics
over recommended operating free-air temperature range (unless otherwise noted)
PARAMETER TEST CONDITIONS VCC MIN TYP(1) MAX UNIT
IOH =100 μA 1.65 V to 5.5 V VCC 0.1
IOH =4 mA 1.65 V 1.2
IOH =8 mA 2.3 V 1.9
VOH V
IOH =16 mA 2.4
3 V
IOH =24 mA 2.3
IOH =32 mA 4.5 V 3.8
IOL = 100 μA 1.65 V to 5.5 V 0.1
IOL = 4 mA 1.65 V 0.45
IOL = 8 mA 2.3 V 0.3
VOL V
IOL = 16 mA 0.4
3 V
IOL = 24 mA 0.55
IOL = 32 mA 4.5 V 0.55
IIA or B inputs VI= 5.5 V or GND 0 to 5.5 V ±5μA
Ioff VIor VO= 5.5 V 0 ±10 μA
ICC VI= 5.5 V or GND, IO= 0 1.65 V to 5.5 V 10 μA
ΔICC One input at VCC 0.6 V, Other inputs at VCC or GND 3 V to 5.5 V 500 μA
CiVI= VCC or GND 3.3 V 4 pF
(1) All typical values are at VCC = 3.3 V, TA= 25°C.
Switching Characteristics
over recommended operating free-air temperature range, CL= 15 pF (unless otherwise noted) (see Figure 1)
VCC = 1.8 V VCC = 2.5 V VCC = 3.3 V VCC = 5 V
FROM TO ±0.15 V ±0.2 V ±0.3 V ±0.5 V
PARAMETER UNIT
(INPUT) (OUTPUT) MIN MAX MIN MAX MIN MAX MIN MAX
tpd A or B Y 1.5 7.2 0.7 4.4 0.8 3.6 0.8 3.4 ns
Switching Characteristics
over recommended operating free-air temperature range, CL= 30 pF or 50 pF (unless otherwise noted) (see Figure 2)
VCC = 1.8 V VCC = 2.5 V VCC = 3.3 V VCC = 5 V
FROM TO ±0.15 V ±0.2 V ±0.3 V ±0.5 V
PARAMETER UNIT
(INPUT) (OUTPUT) MIN MAX MIN MAX MIN MAX MIN MAX
tpd A or B Y 2.4 8 1.1 5.5 1 4.5 1 4 ns
Operating Characteristics
TA= 25°CVCC = 1.8 V VCC = 2.5 V VCC = 3.3 V VCC = 5 V
TEST
PARAMETER UNIT
CONDITIONS TYP TYP TYP TYP
Cpd Power dissipation capacitance f = 10 MHz 21 24 26 31 pF
Copyright ©19992011, Texas Instruments Incorporated Submit Documentation Feedback 5
Product Folder Link(s): SN74LVC1G08
th
tsu
FromOutput
UnderTest
C
(seeNote A)
L
LOADCIRCUIT
S1
VLOAD
Open
GND
RL
DataInput
TimingInput
0V
0V
0V
tW
Input
0V
Input
Output
Waveform1
S1atV
(seeNoteB)
LOAD
Output
Waveform2
S1atGND
(seeNoteB)
VOL
VOH
0V
»0V
Output
Output
t /t
PLH PHL Open
TEST S1
Output
Control
VM
VMVM
VM
VM
1.8V 0.15V±
2.5V 0.2V±
3.3V 0.3V±
5V 0.5V±
1MW
1MW
1MW
1MW
VCC RL
2× VCC
2× VCC
6V
2× VCC
VLOAD CL
15pF
15pF
15pF
15pF
0.15V
0.15V
0.3V
0.3V
VD
3V
VI
VCC/2
VCC/2
1.5V
VCC/2
VM
£2ns
£2ns
£2.5ns
£2.5ns
INPUTS
RL
t /t
r f
VCC
VCC
VCC
VLOAD
t /t
PLZ PZL
GND
t /t
PHZ PZH
VOLTAGEWAVEFORMS
ENABLE ANDDISABLETIMES
LOW- ANDHIGH-LEVEL ENABLING
VOLTAGEWAVEFORMS
PROPAGATIONDELAY TIMES
INVERTING ANDNONINVERTINGOUTPUTS
NOTES: A. C includesprobeandjigcapacitance.
B. Waveform1isforanoutputwithinternalconditionssuchthattheoutputislow,exceptwhendisabledbytheoutputcontrol.
Waveform2isforanoutputwithinternalconditionssuchthattheoutputishigh,exceptwhendisabledbytheoutputcontrol.
C. Allinputpulsesaresuppliedbygeneratorshavingthefollowingcharacteristics:PRR 10MHz,Z =50 .
D. Theoutputsaremeasuredoneatatime,withonetransitionpermeasurement.
E. t andt arethesameast .
F. t andt arethesameast .
G. t andt arethesameast .
H. Allparametersandwaveformsarenotapplicabletoalldevices.
L
O
PLZ PHZ dis
PZL PZH en
PLH PHL pd
£ W
VOLTAGEWAVEFORMS
PULSEDURATION
VOLTAGEWAVEFORMS
SETUP ANDHOLDTIMES
VI
VI
VI
VM
VM
V /2
LOAD
tPZL tPLZ
tPHZ
tPZH
V V
OH D
V +V
OL D
VM
VMVM
VM
VOL
VOH
VI
VI
VOH
VOL
VM
VM
VM
VM
tPLH tPHL
tPLH
tPHL
SN74LVC1G08
SCES217U APRIL 1999REVISED MARCH 2011
www.ti.com
PARAMETER MEASUREMENT INFORMATION
Figure 1. Load Circuit and Voltage Waveforms
6Submit Documentation Feedback Copyright ©19992011, Texas Instruments Incorporated
Product Folder Link(s): SN74LVC1G08
th
tsu
FromOutput
UnderTest
C
(seeNote A)
L
LOADCIRCUIT
S1
VLOAD
Open
GND
RL
DataInput
TimingInput
0V
0V
0V
tW
Input
0V
Input
Output
Waveform1
S1atV
(seeNoteB)
LOAD
Output
Waveform2
S1atGND
(seeNoteB)
VOL
VOH
0V
»0V
Output
Output
TEST S1
t /t
PLH PHL Open
Output
Control
VM
VMVM
VM
VM
1.8V 0.15V±
2.5V 0.2V±
3.3V 0.3V±
5V 0.5V±
1kW
500 W
500 W
500 W
VCC RL
2× VCC
2× VCC
6V
2× VCC
VLOAD CL
30pF
30pF
50pF
50pF
0.15V
0.15V
0.3V
0.3V
VD
3V
VI
VCC/2
VCC/2
1.5V
VCC/2
VM
£2ns
£2ns
£2.5ns
£2.5ns
INPUTS
RL
t /t
r f
VCC
VCC
VCC
VLOAD
t /t
PLZ PZL
GND
t /t
PHZ PZH
VOLTAGEWAVEFORMS
ENABLE ANDDISABLETIMES
LOW- ANDHIGH-LEVEL ENABLING
VOLTAGEWAVEFORMS
PROPAGATIONDELAY TIMES
INVERTING ANDNONINVERTINGOUTPUTS
NOTES: A. C includesprobeandjigcapacitance.
B. Waveform1isforanoutputwithinternalconditionssuchthattheoutputislow,exceptwhendisabledbytheoutputcontrol.
Waveform2isforanoutputwithinternalconditionssuchthattheoutputishigh,exceptwhendisabledbytheoutputcontrol.
C. Allinputpulsesaresuppliedbygeneratorshavingthefollowingcharacteristics:PRR 10MHz,Z =50 .
D. Theoutputsaremeasuredoneatatime,withonetransitionpermeasurement.
E. t andt arethesameast .
F. t andt arethesameast .
G. t andt arethesameast .
H. Allparametersandwaveformsarenotapplicabletoalldevices.
L
O
PLZ PHZ dis
PZL PZH en
PLH PHL pd
£ W
VOLTAGEWAVEFORMS
PULSEDURATION
VOLTAGEWAVEFORMS
SETUP ANDHOLDTIMES
VI
VI
VI
VM
VM
V /2
LOAD
tPZL tPLZ
tPHZ
tPZH
V V
OH D
V +V
OL D
VM
VMVM
VM
VOL
VOH
VI
VI
VOH
VOL
VM
VM
VM
VM
tPLH tPHL
tPLH
tPHL
SN74LVC1G08
www.ti.com
SCES217U APRIL 1999REVISED MARCH 2011
PARAMETER MEASUREMENT INFORMATION (continued)
Figure 2. Load Circuit and Voltage Waveforms
Copyright ©19992011, Texas Instruments Incorporated Submit Documentation Feedback 7
Product Folder Link(s): SN74LVC1G08
SN74LVC1G08
SCES217U APRIL 1999REVISED MARCH 2011
www.ti.com
REVISION HISTORY
Changes from Revision T (February 2007) to Revision U Page
Added Thermal Information table. ........................................................................................................................................ 3
8Submit Documentation Feedback Copyright ©19992011, Texas Instruments Incorporated
Product Folder Link(s): SN74LVC1G08
PACKAGE OPTION ADDENDUM
www.ti.com 1-Jun-2012
Addendum-Page 1
PACKAGING INFORMATION
Orderable Device Status (1) Package Type Package
Drawing Pins Package Qty Eco Plan (2) Lead/
Ball Finish MSL Peak Temp (3) Samples
(Requires Login)
SN74LVC1G08DBVR ACTIVE SOT-23 DBV 5 3000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74LVC1G08DBVRE4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74LVC1G08DBVRG4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74LVC1G08DBVT ACTIVE SOT-23 DBV 5 250 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74LVC1G08DBVTE4 ACTIVE SOT-23 DBV 5 250 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74LVC1G08DBVTG4 ACTIVE SOT-23 DBV 5 250 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74LVC1G08DCKR ACTIVE SC70 DCK 5 3000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74LVC1G08DCKRE4 ACTIVE SC70 DCK 5 3000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74LVC1G08DCKRG4 ACTIVE SC70 DCK 5 3000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74LVC1G08DCKT ACTIVE SC70 DCK 5 250 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74LVC1G08DCKTE4 ACTIVE SC70 DCK 5 250 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74LVC1G08DCKTG4 ACTIVE SC70 DCK 5 250 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74LVC1G08DRLR ACTIVE SOT DRL 5 4000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74LVC1G08DRLRG4 ACTIVE SOT DRL 5 4000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74LVC1G08DRYR ACTIVE SON DRY 6 5000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74LVC1G08DRYRG4 ACTIVE SON DRY 6 5000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74LVC1G08DSFR ACTIVE SON DSF 6 5000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
PACKAGE OPTION ADDENDUM
www.ti.com 1-Jun-2012
Addendum-Page 2
Orderable Device Status (1) Package Type Package
Drawing Pins Package Qty Eco Plan (2) Lead/
Ball Finish MSL Peak Temp (3) Samples
(Requires Login)
SN74LVC1G08YZPR ACTIVE DSBGA YZP 5 3000 Green (RoHS
& no Sb/Br) SNAGCU Level-1-260C-UNLIM
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
OTHER QUALIFIED VERSIONS OF SN74LVC1G08 :
Automotive: SN74LVC1G08-Q1
Enhanced Product: SN74LVC1G08-EP
NOTE: Qualified Version Definitions:
Automotive - Q100 devices qualified for high-reliability automotive applications targeting zero defects
PACKAGE OPTION ADDENDUM
www.ti.com 1-Jun-2012
Addendum-Page 3
Enhanced Product - Supports Defense, Aerospace and Medical Applications
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device Package
Type Package
Drawing Pins SPQ Reel
Diameter
(mm)
Reel
Width
W1 (mm)
A0
(mm) B0
(mm) K0
(mm) P1
(mm) W
(mm) Pin1
Quadrant
SN74LVC1G08DBVR SOT-23 DBV 5 3000 178.0 9.2 3.3 3.2 1.55 4.0 8.0 Q3
SN74LVC1G08DBVR SOT-23 DBV 5 3000 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3
SN74LVC1G08DBVR SOT-23 DBV 5 3000 180.0 9.2 3.17 3.23 1.37 4.0 8.0 Q3
SN74LVC1G08DBVT SOT-23 DBV 5 250 178.0 9.2 3.3 3.2 1.55 4.0 8.0 Q3
SN74LVC1G08DBVT SOT-23 DBV 5 250 180.0 9.2 3.17 3.23 1.37 4.0 8.0 Q3
SN74LVC1G08DBVT SOT-23 DBV 5 250 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3
SN74LVC1G08DCKR SC70 DCK 5 3000 180.0 9.2 2.3 2.55 1.2 4.0 8.0 Q3
SN74LVC1G08DCKR SC70 DCK 5 3000 178.0 9.2 2.4 2.4 1.22 4.0 8.0 Q3
SN74LVC1G08DCKR SC70 DCK 5 3000 178.0 9.0 2.4 2.5 1.2 4.0 8.0 Q3
SN74LVC1G08DCKT SC70 DCK 5 250 180.0 9.2 2.3 2.55 1.2 4.0 8.0 Q3
SN74LVC1G08DCKT SC70 DCK 5 250 178.0 9.0 2.4 2.5 1.2 4.0 8.0 Q3
SN74LVC1G08DCKT SC70 DCK 5 250 178.0 9.2 2.4 2.4 1.22 4.0 8.0 Q3
SN74LVC1G08DRLR SOT DRL 5 4000 180.0 8.4 1.98 1.78 0.69 4.0 8.0 Q3
SN74LVC1G08DRLR SOT DRL 5 4000 180.0 9.5 1.78 1.78 0.69 4.0 8.0 Q3
SN74LVC1G08DRYR SON DRY 6 5000 179.0 8.4 1.2 1.65 0.7 4.0 8.0 Q1
SN74LVC1G08DRYR SON DRY 6 5000 180.0 9.5 1.15 1.6 0.75 4.0 8.0 Q1
SN74LVC1G08DSFR SON DSF 6 5000 180.0 9.5 1.16 1.16 0.5 4.0 8.0 Q2
SN74LVC1G08YZPR DSBGA YZP 5 3000 180.0 8.4 1.02 1.52 0.63 4.0 8.0 Q1
PACKAGE MATERIALS INFORMATION
www.ti.com 1-Sep-2012
Pack Materials-Page 1
*All dimensions are nominal
Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm)
SN74LVC1G08DBVR SOT-23 DBV 5 3000 180.0 180.0 18.0
SN74LVC1G08DBVR SOT-23 DBV 5 3000 180.0 180.0 18.0
SN74LVC1G08DBVR SOT-23 DBV 5 3000 205.0 200.0 33.0
SN74LVC1G08DBVT SOT-23 DBV 5 250 180.0 180.0 18.0
SN74LVC1G08DBVT SOT-23 DBV 5 250 205.0 200.0 33.0
SN74LVC1G08DBVT SOT-23 DBV 5 250 180.0 180.0 18.0
SN74LVC1G08DCKR SC70 DCK 5 3000 205.0 200.0 33.0
SN74LVC1G08DCKR SC70 DCK 5 3000 180.0 180.0 18.0
SN74LVC1G08DCKR SC70 DCK 5 3000 180.0 180.0 18.0
SN74LVC1G08DCKT SC70 DCK 5 250 205.0 200.0 33.0
SN74LVC1G08DCKT SC70 DCK 5 250 180.0 180.0 18.0
SN74LVC1G08DCKT SC70 DCK 5 250 180.0 180.0 18.0
SN74LVC1G08DRLR SOT DRL 5 4000 202.0 201.0 28.0
SN74LVC1G08DRLR SOT DRL 5 4000 180.0 180.0 30.0
SN74LVC1G08DRYR SON DRY 6 5000 203.0 203.0 35.0
SN74LVC1G08DRYR SON DRY 6 5000 180.0 180.0 30.0
SN74LVC1G08DSFR SON DSF 6 5000 180.0 180.0 30.0
SN74LVC1G08YZPR DSBGA YZP 5 3000 210.0 185.0 35.0
PACKAGE MATERIALS INFORMATION
www.ti.com 1-Sep-2012
Pack Materials-Page 2
X: Max =
Y: Max =
1.43 mm, Min =
0.93 mm, Min =
1.37 mm
0.87 mm
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which
have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such
components to meet such requirements.
Products Applications
Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive
Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications
Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers
DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps
DSP dsp.ti.com Energy and Lighting www.ti.com/energy
Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial
Interface interface.ti.com Medical www.ti.com/medical
Logic logic.ti.com Security www.ti.com/security
Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense
Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video
RFID www.ti-rfid.com
OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com
Wireless Connectivity www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2012, Texas Instruments Incorporated