74ACT08SCQR - National Semiconductor

TL/F/9914

54AC/74AC08 #74ACT08 Quad 2-Input AND Gate

March 1993

54AC/74AC08 #74ACT08

Quad 2-Input AND Gate

General Description

The ’AC/’ACT08 contains four, 2-input AND gates.

Features

YICC reduced by 50% on 54AC/74AC only

YOutputs source/sink 24 mA

Y’ACT08 has TTL-compatible inputs

YStandard Military Drawing (SMD)

Ð ’AC08: 5962-87615

YFor Military 54ACT08 device, see 54ACTQ08

Logic Symbols

IEEE/IEC

TL/F/9914–1

Connection Diagrams

Pin Assignment

for DIP, Flatpak and SOIC

TL/F/9914–3

Pin Assignment

for LCC

TL/F/9914–2

Pin Names Description

An,B

nInputs

OnOutputs

FACTTM is a trademark of National Semiconductor Corporation.

C1995 National Semiconductor Corporation RRD-B30M75/Printed in U. S. A.

Absolute Maximum Rating (Note 1)

If Military/Aerospace specified devices are required,

please contact the National Semiconductor Sales

Office/Distributors for availability and specifications.

Supply Voltage (VCC)b0.5V to a7.0V

DC Input Diode Current (IIK)

VIeb

0.5V b20 mA

VIeVCC a0.5V a20 mA

DC Input Voltage (VI)b0.5V to VCC a0.5V

DC Output Diode Current (IOK)

VOeb

0.5V b20 mA

VOeVCC a0.5V a20 mA

DC Output Voltage (VO)b0.5V to VCC a0.5V

DC Output Source

or Sink Current (IO)g50 mA

DC VCC or Ground Current

per Output Pin (ICC or IGND)g50 mA

Storage Temperature (TSTG)b65§Ctoa

150§C

Junction Temperature (TJ)

CDIP 175§C

PDIP 140§C

Note 1: Absolute maximum ratings are those values beyond which damage

to the device may occur. The databook specifications should be met, without

exception, to ensure that the system design is reliable over its power supply,

temperature, and output/input loading variables. National does not recom-

mend operation of FACTTM circuits outside databook specifications.

Recommended Operating

Conditions

Supply Voltage (VCC)

’AC 2.0V to 6.0V

’ACT 4.5V to 5.5V

Input Voltage (VI) 0VtoV

Output Voltage (VO) 0VtoV

Operating Temperature (TA)

74AC/ACT b40§Ctoa

85§C

54AC b55§Ctoa

125§C

Minimum Input Edge Rate (DV/Dt)

’AC Devices

VIN from 30% to 70% of VCC

VCC @3.3V, 4.5V, 5.5V 125 mV/ns

Minimum Input Edge Rate (DV/Dt)

’ACT Devices

VIN from 0.8V to 2.0V

VCC @4.5V, 5.5V 125 mV/ns

DC Characteristics for ’AC Family Devices

74AC 54AC 74AC

Symbol Parameter VCC TAea

25§CTAeTAeUnits Conditions

(V) b55§Ctoa

125§Cb40§Ctoa

85§C

Typ Guaranteed Limits

VIH Minimum High Level 3.0 1.5 2.1 2.1 2.1 VOUT e0.1V

Input Voltage 4.5 2.25 3.15 3.15 3.15 V or VCC b0.1V

5.5 2.75 3.85 3.85 3.85

VIL Maximum Low Level 3.0 1.5 0.9 0.9 0.9 VOUT e0.1V

Input Voltage 4.5 2.25 1.35 1.35 1.35 V or VCC b0.1V

5.5 2.75 1.65 1.65 1.65

VOH Minimum High Level 3.0 2.99 2.9 2.9 2.9 IOUT eb

50 mA

Output Voltage 4.5 4.49 4.4 4.4 4.4 V

5.5 5.49 5.4 5.4 5.4

*VIN eVIL or VIH

3.0 2.56 2.4 2.46 b12 mA

4.5 3.86 3.7 3.76 V IOH b24 mA

5.5 4.86 4.7 4.76 b24 mA

VOL Maximum Low Level 3.0 0.002 0.1 0.1 0.1 IOUT e50 mA

Output Voltage 4.5 0.001 0.1 0.1 0.1 V

5.5 0.001 0.1 0.1 0.1

*VIN eVIL or VIH

3.0 0.36 0.5 0.44 12 mA

4.5 0.36 0.5 0.44 V IOL 24 mA

5.5 0.36 0.5 0.44 24 mA

IIN Maximum Input 5.5 g0.1 g1.0 g1.0 mAVIeVCC, GND

Leakage Current

*All outputs loaded; thresholds on input associated with output under test.

DC Characteristics for ’AC Family Devices (Continued)

74AC 54AC 74AC

Symbol Parameter VCC TAea

25§CTAeTAeUnits Conditions

(V) b55§Ctoa

125§Cb40§Ctoa

85§C

Typ Guaranteed Limits

IOLD ²Minimum Dynamic 5.5 50 75 mA VOLD e1.65V Max

IOHD Output Current 5.5 b50 b75 mA VOHD e3.85V Min

ICC Maximum Quiescent 5.5 2.0 40.0 20.0 mAVIN eVCC

Supply Current or GND

²Maximum test duration 2.0 ms, one output loaded at a time.

Note: IIN and ICC @3.0V are guaranteed to be less than or equal to the respective limit @5.5V VCC.

ICC for 54AC @25§C is identical to 74AC @25§C.

DC Characteristics for ’ACT Family Devices

74ACT 74ACT

Symbol Parameter VCC TAea

25§CTAeUnits Conditions

(V) b40§Ctoa

85§C

Typ Guaranteed Limits

VIH Minimum High Level 4.5 1.5 2.0 2.0 VVOUT e0.1V

Input Voltage 5.5 1.5 2.0 2.0 or VCC b0.1V

VIL Maximum Low Level 4.5 1.5 0.8 0.8 VVOUT e0.1V

Input Voltage 5.5 1.5 0.8 0.8 or VCC b0.1V

VOH Minimum High Level 4.5 4.49 4.4 4.4 VIOUT eb

50 mA

Output Voltage 5.5 5.49 5.4 5.4

*VIN eVIL or VIH

4.5 3.86 3.76 VI

b24 mA

5.5 4.86 4.76 b24 mA

VOL Maximum Low Level 4.5 0.001 0.1 0.1 VIOUT e50 mA

Output Voltage 5.5 0.001 0.1 0.1

*VIN eVIL or VIH

4.5 0.36 0.44 VI

24 mA

5.5 0.36 0.44 24 mA

IIN Maximum Input 5.5 g0.1 g1.0 mAVIeVCC, GND

Leakage Current

ICCT Maximum 5.5 0.6 1.5 mA VIeVCC b2.1V

ICC/Input

IOLD ²Minimum Dynamic 5.5 75 mA VOLD e1.65V Max

IOHD Output Current 5.5 b75 mA VOHD e3.85V Min

ICC Maximum Quiescent 5.5 4.0 40.0 mAVIN eVCC

Supply Current or GND

*All outputs loaded; thresholds on input associated with output under test.

²Maximum test duration 2.0 ms, one output loaded at a time.

AC Electrical Characteristics

74AC 54AC 74AC

VCC*TAea

25§CTAeb

55§CT

40§C

Symbol Parameter (V) CLe50 pF to a125§Cto

85§C Units

CLe50 pF CLe50 pF

Min Typ Max Min Max Min Max

tPLH Propagation Delay 3.3 1.5 7.5 9.5 1.0 12.5 1.0 10.0 ns

5.0 1.5 5.5 7.5 1.5 9.0 1.0 8.5

tPHL Propagation Delay 3.3 1.5 7.0 8.5 1.0 11.5 1.0 9.0 ns

5.0 1.5 5.5 7.0 1.5 8.5 1.0 7.5

*All outputs loaded; thresholds on input associated with output under test.

²Maximum test duration 2.0 ms, one output loaded at a time.

AC Electrical Characteristics

74ACT 74ACT

VCC*TAea

25§CTAeb

40§C

Symbol Parameter (V) CLe50 pF to a85§C Units

CLe50 pF

Min Typ Max Min Max

tPLH Propagation Delay 5.0 1.0 6.5 9.0 1.0 10.0 ns

tPHL Propagation Delay 5.0 1.0 6.5 9.0 1.0 10.0 ns

*Voltage Range 5.0 is 5.0V g0.5V

Capacitance

Symbol Parameter Typ Units Conditions

CIN Input Capacitance 4.5 pF VCC eOPEN

CPD Power Dissipation 20.0 pF VCC e5.0V

Capacitance

Ordering Information

The device number is used to form part of a simplified purchasing code where the package type and temperature range are

defined as follows:

74AC 08 P C QR

Temperature Range Family Special Variations

74AC eCommercial X eDevices shipped in 13×reels

54AC eMilitary QR eCommercial grade device with burn-

74ACT eCommercial TTL-Compatible in

QB eMilitary grade device with

Device Type environmental and burn-in

processing shipped in tubes

Package Code

PePlastic DIP Temperature Range

DeCeramic DIP CeCommercial (b40§Ctoa

85§C)

FeFlatpak MeMilitary (b55§Ctoa

125§C)

LeLeadless Ceramic Chip Carrier (LCC)

SeSmall Outline (SOIC)

Physical Dimensions inches (millimeters)

20-Terminal Ceramic Leadless Chip Carrier (L)

NS Package Number E20A

14-Lead Ceramic Dual-In-Line Package (D)

NS Package Number J14A

Physical Dimensions inches (millimeters) (Continued)

14-Lead Small Outline Integrated Circuit (S)

NS Package Number M14A

14-Lead Plastic Dual-In-Line Package (P)

NS Package Number N14A

54AC/74AC08 #74ACT08 Quad 2-Input AND Gate

Physical Dimensions inches (millimeters) (Continued)

14-Lead Ceramic Flatpak (F)

NS Package Number W14B

LIFE SUPPORT POLICY

NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT

DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL

SEMICONDUCTOR CORPORATION. As used herein:

1. Life support devices or systems are devices or 2. A critical component is any component of a life

systems which, (a) are intended for surgical implant support device or system whose failure to perform can

into the body, or (b) support or sustain life, and whose be reasonably expected to cause the failure of the life

failure to perform, when properly used in accordance support device or system, or to affect its safety or

with instructions for use provided in the labeling, can effectiveness.

be reasonably expected to result in a significant injury

to the user.

National Semiconductor National Semiconductor National Semiconductor National Semiconductor National Semiconductores National Semiconductor

Corporation GmbH Japan Ltd. Hong Kong Ltd. Do Brazil Ltda. (Australia) Pty, Ltd.

2900 Semiconductor Drive Livry-Gargan-Str. 10 Sumitomo Chemical 13th Floor, Straight Block, Rue Deputado Lacorda Franco Building 16

P.O. Box 58090 D-82256 F4urstenfeldbruck Engineering Center Ocean Centre, 5 Canton Rd. 120-3A Business Park Drive

Santa Clara, CA 95052-8090 Germany Bldg. 7F Tsimshatsui, Kowloon Sao Paulo-SP Monash Business Park

Tel: 1(800) 272-9959 Tel: (81-41) 35-0 1-7-1, Nakase, Mihama-Ku Hong Kong Brazil 05418-000 Nottinghill, Melbourne

TWX: (910) 339-9240 Telex: 527649 Chiba-City, Tel: (852) 2737-1600 Tel: (55-11) 212-5066 Victoria 3168 Australia

Fax: (81-41) 35-1 Ciba Prefecture 261 Fax: (852) 2736-9960 Telex: 391-1131931 NSBR BR Tel: (3) 558-9999

Tel: (043) 299-2300 Fax: (55-11) 212-1181 Fax: (3) 558-9998

Fax: (043) 299-2500

National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.